立即開始

頻帶和通道

Cloud Gold TrendTrend Filter (Ichimoku): If the price is above the cloud (Kumo), look only for "Long" signals. If it is below, look only for "Short" signals. Entry Signal (Bollinger): When the price touches the Lower Band while you are above the Cloud, it could be a great buying point in an uptrend. Volatility Confirmation: If the Bollinger Bands squeeze within the cloud, get ready for a strong directional move as soon as the price breaks one of the two levels.
Pine Script®指標
由Aplanet33提供
GOLD TERTIUM MGC 1mThis indicator is a visual tool for TradingView designed to help you read trend structure using EMAs and highlight potential long and short entries on the MGC 1‑minute chart, while filtering pullbacks and avoiding trades when the 200 EMA is flat. ​ It calculates five EMAs (32, 50, 110, 200, 250) and plots them in different colors so you can clearly see the moving‑average stack and overall direction. The main trend is defined by the 200 EMA: bullish when price and the fast EMAs (32 and 50) are above it with a positive slope, and bearish when they are below it with a negative slope; if the 200 EMA is almost flat, signals are blocked to reduce trading in choppy markets. ​ Entry logic looks for a pullback into the 32–50 EMA zone on the previous candle, then requires a trend‑aligned candle to trigger a signal: long when the trend is up, the previous bar retested the EMA zone, and the current bar closes above EMA 32 with a bullish body; short when the trend is down, there was a valid retest, the current bar closes below EMA 32 with a bearish body and EMA 32 is below EMA 50. On the chart, you will see colored EMAs plus green “L” triangles under bars for potential long entries and red “S” triangles above bars for potential short entries, which are meant as visual cues rather than automatic trade instructions
Pine Script®指標
由bkfeuer326提供
Triple Confirmation with Alerts//@version=5 indicator("Triple Confirmation with Alerts", overlay=true) // Confirmation 1: ADX Trend Strength adxlen = input(14, "ADX Length") dilen = input(14, "DI Length") = ta.dmi(dilen, adxlen) trendStrong = adx > 25 uptrend = diplus > diminus and trendStrong downtrend = diminus > diplus and trendStrong // Confirmation 2: Stochastic k = ta.sma(ta.stoch(close, high, low, 14), 3) d = ta.sma(k, 3) stochBullish = k > d and k <= d and k < 80 stochBearish = k < d and k >= d and k > 20 // Confirmation 3: Bollinger Bands bbLength = input(20, "BB Length") bbMult = input(2.0, "BB Multiplier") basis = ta.sma(close, bbLength) dev = bbMult * ta.stdev(close, bbLength) upper = basis + dev lower = basis - dev bbBullish = close > lower and close <= lower bbBearish = close < upper and close >= upper // Generate Signals buySignal = uptrend and stochBullish and bbBullish sellSignal = downtrend and stochBearish and bbBearish // Plot plotshape(buySignal, "Buy", shape.triangleup, location.belowbar, color.green, size=size.small) plotshape(sellSignal, "Sell", shape.triangledown, location.abovebar, color.red, size=size.small) // Alerts alertcondition(buySignal, "Triple Confirmation Buy", "Buy signal generated") alertcondition(sellSignal, "Triple Confirmation Sell", "Sell signal generated")
Pine Script®指標
由PodaAnjinadhari提供
VDUB Bands - MTF WMA+ATR Volatility Lanes (6 Alerts)VDUB Bands draws volatility-scaled “trend lanes” around a Weighted Moving Average (WMA) using ATR (or a WMA of True Range). It can display up to four tiers (L1–L4), with higher tiers sourced from higher timeframes to show local structure → higher-timeframe structure on a single chart. ──────────────────────────────────────── 1. What it does (plain English) ──────────────────────────────────────── Think of each tier as a lane system around the trend: • Inner rails = “normal volatility lane” around the WMA • Outer rails = “extension / extreme zone” for that tier • Higher tiers (L3/L4) show bigger structure • Lower tiers (L1/L2) show active lane behavior Typical interpretation: • Price inside inner rails → normal variance around the trend lane • Between inner and outer → stretched, but not extreme • Outside outer rails → extended vs that tier’s volatility band ──────────────────────────────────────── 2) Why it’s useful (and why it’s not a mashup) ──────────────────────────────────────── This is not a bundle of unrelated indicators. Everything serves one cohesive purpose: • Visualize trend + volatility lanes across multiple time horizons • Keep rails consistent and readable (levels, fills, outlines) • Optional multi-timeframe aggregation for structure context • A compact 6-alert set to catch key transitions without alert spam ──────────────────────────────────────── 3) What you see on the chart ──────────────────────────────────────── For each level (L1–L4), you can show: • Upper/Lower Inner rails • Upper/Lower Outer rails • Optional center fill (between outer rails) = operating range • Optional MA line per tier (off by default to reduce clutter) • Base WMA line (L1 MA) if enabled Suggested workflow: • Start with L1 + L2 only • Add L3/L4 once you like the structure view • Use Dynamic Opacity if the chart feels crowded ──────────────────────────────────────── 4) How it works (transparent formula) ──────────────────────────────────────── For each tier: • MA = WMA(source, baseLen × levelMultiplier) • ATR_like = Wilder ATR (default) OR WMA(TrueRange, atrLen × levelMultiplier) Inner rails: • upperInner = MA + ATR_like × innerMult • lowerInner = MA - ATR_like × innerMult Outer rails: • upperOuter = MA + ATR_like × outerMult • lowerOuter = MA - ATR_like × outerMult Tier behavior: • L1 uses the chart timeframe • L2–L4 can use user-selected HTFs (defaults: 4H / D / W) or optional auto-selection ──────────────────────────────────────── 5) Multi-timeframe behavior + interpolation ──────────────────────────────────────── • L2–L4 use request.security() with lookahead OFF (no future data). • HTF bands naturally “step” when the HTF candle confirms. • Interpolate HTF Bands (optional): visually blends from the prior confirmed HTF value to the current confirmed HTF value to reduce stepping. This is display smoothing, not prediction. Repaint note: • If Live Interp (Repaints) is enabled, the HTF lines can update intrabar and may repaint. Keep it OFF for strict non-repainting behavior. ──────────────────────────────────────── 6) Auto-select L2/L3/L4 (optional) ──────────────────────────────────────── Two modes: A) Ladder (deterministic) • Picks “bigger” timeframes relative to the chart (simple and fast). B) Score (data-driven) • Tests candidate timeframes and scores them using: • Coverage: % of closes inside the OUTER band over Score Lookback • Width: average outer-band width as a fraction of MA • Targets: Target Coverage + Target Width • Weights: Coverage Weight + Width Weight Performance notes: • Score mode is heavier (many candidates). • “Lock auto-select after first pick” is recommended to reduce load and avoid platform limits. ──────────────────────────────────────── 7) Alerts (6 total, aggregated across L1–L4) ──────────────────────────────────────── Alerts trigger if ANY tier meets the condition: • Cross ABOVE an OUTER band • Cross BELOW an OUTER band • Cross ABOVE an INNER band • Cross BELOW an INNER band • Price is OUTSIDE ABOVE an OUTER band • Price is OUTSIDE BELOW an OUTER band These are intentionally aggregated to keep the alert count small while catching meaningful transitions. ──────────────────────────────────────── 8) Limitations & transparency ──────────────────────────────────────── • Indicator only (not a strategy). No performance claims. • MTF values update when the higher timeframe candle confirms. • Interpolation is visual smoothing; it does not forecast. • Non-standard chart types (Heikin Ashi/Renko/etc) may behave differently from standard candles. • If you enable repainting options, signals/levels may change intrabar. ──────────────────────────────────────── 9) Credits/reuse disclosure ──────────────────────────────────────── • Conceptual inspiration: VDUB and the community “VDUB_BINARY_PRO_3_V2” idea of WMA ± TR/ATR × multipliers. • This version is a reimplementation + extension, adding: o Multi-tier architecture (L1–L4) o Higher-timeframe sourcing + optional interpolation o Optional scoring-based timeframe selection o Dynamic opacity + streamlined plotting o Aggregated 6-alert set No code was copied directly from the older script; this is a rewritten implementation with additional features and different structure. www.tradingview.com
Pine Script®指標
由actemplet提供
Fibonacci + RSI - StrategyOverview This is an intraday mean-reversion strategy designed for short timeframes (1–30 minutes). It combines volatility-based Fibonacci bands with RSI momentum signals to identify temporary price extremes and trade pullbacks back toward fair value. The strategy trades both long and short, uses limit entries, a manual exit logic, and a hard stop-loss as risk protection. Market Context The strategy assumes that, on intraday timeframes: price frequently deviates from its short-term fair value, extreme deviations tend to revert, momentum (RSI) can confirm exhaustion. It is not a trend-following system. Trades are taken against short-term extremes, not in the direction of breakouts. Indicators Used 1. Fibonacci Volatility Bands The bands are calculated using: VWMA (Volume Weighted Moving Average) as the central price, Standard Deviation as a volatility measure, a multiplier to create upper and lower bands. Key levels: Upper Band (fu1) – overextended price zone Lower Band (fd1) – oversold price zone Intermediate targets (fu764 / fd764) – mean-reversion profit targets These bands behave similarly to dynamic volatility channels. 2. RSI (Relative Strength Index) RSI length: typically 14 Oversold level: 30 Overbought level: 70 The strategy uses RSI crossovers to confirm momentum reversal: crossing up from oversold → potential long crossing down from overbought → potential short Entry Rules Long Entry A long position is considered when: Price trades below the lower Fibonacci band (fd1) RSI crosses upward from the oversold level Price is still below the predefined upside target The trade is entered using a limit order at the candle close. Short Entry A short position is considered when: Price trades above the upper Fibonacci band (fu1) RSI crosses downward from the overbought level Price is still above the predefined downside target The trade is entered using a limit order at the candle close. Exit Rules Manual Exit (Primary Exit) Positions are closed manually when price reaches predefined Fibonacci target levels: Long: price moves back up into the target zone Short: price moves back down into the target zone This exit represents the mean-reversion objective of the strategy. Stop-Loss (Risk Protection) A hard stop-loss is always active to protect against adverse moves. Long stop: below entry price Short stop: above entry price The stop is calculated as a fixed percentage (or ATR-based in later versions) from the entry price. The stop-loss is not the primary exit, but a safety mechanism. Order Management Philosophy Limit entries are used to avoid market slippage. Manual exits control trade logic. Stop-loss exits control risk only. Only one position per direction is managed at a time. Alerts are generated at signal or entry time for automation or monitoring. Risk & Characteristics Designed for frequent, small trades Low average drawdown per trade Performance depends heavily on: volatility regime correct stop sizing disciplined risk management Without proper position sizing, the strategy must not be traded live. Suitable Markets Forex pairs Indices Liquid crypto pairs Best performance is expected in ranging or mildly trending markets. Summary This strategy attempts to exploit short-term price overextensions by combining volatility bands with momentum confirmation. It relies on mean reversion, controlled risk, and disciplined execution rather than large directional moves.
Pine Script®策略
由hacky1610_1提供
WoAlgo x DBG v3 Premium**WoAlgo x DBG v3 Premium - Breakout & Trailing System** ## Overview WoAlgo x DBG v3 Premium is a comprehensive trading indicator that combines breakout detection, EMA crossover signals, and an intelligent trailing stop mechanism. This indicator is designed to identify potential entry points and manage trades with dynamic exit strategies. ## How It Works The indicator operates using a multi-component approach: **Entry Mechanism (3 Modes)** 1. **Breakout Mode**: Detects when price breaks above recent highs or below recent lows, simulating pending stop orders 2. **EMA Cross Mode**: Generates signals based on fast/slow EMA crossovers (default: 10/21) 3. **Both Mode**: Combines breakout and EMA signals for confluence-based entries **Trailing Stop System** The core feature of this indicator is its trailing stop mechanism: - Activates when trade reaches minimum profit threshold (default: 0.6 points) - Moves stop loss progressively as price moves favorably (default step: 0.2 points) - Locks in profits while allowing trades to capture extended moves - Provides dynamic exit rather than fixed take profit only **Time Filter** - Customizable trading window with timezone conversion - Day-of-week filters to avoid specific trading days - Automatic pending order cancellation outside trading hours ## Key Features - **Non-Repainting Signals**: All signals confirmed on bar close only - **Real-Time Dashboard**: Displays win rate, profit factor, trade statistics, and exit type breakdown - **Visual Trade Management**: Shows entry, TP, SL, and trailing stop levels on chart - **Pending Zone Visualization**: Displays potential breakout trigger levels - **Comprehensive Alerts**: Separate alerts for entries, TP hits, SL hits ## Parameters | Parameter | Default | Description | |-----------|---------|-------------| | Entry Mode | Breakout | Signal generation method | | Breakout Period | 1 | Candles for high/low calculation | | Breakout Buffer | 0.3 | Distance from high/low for pending | | Fast EMA | 10 | Fast moving average period | | Slow EMA | 21 | Slow moving average period | | Take Profit | 5.0 | Points for TP level | | Stop Loss | 8.0 | Points for SL level | | Trail Start | 0.6 | Minimum profit to activate trailing | | Trail Step | 0.2 | Trailing stop movement increment | ## How to Use 1. **Apply to Chart**: Add indicator to your preferred timeframe 2. **Configure Time Filter**: Set your trading session hours and timezone offset 3. **Monitor Signals**: - Green triangle = potential long entry - Red triangle = potential short entry 4. **Track Active Trades**: Dashboard shows current position status and statistics 5. **Review Performance**: Check win rate, profit factor, and exit type distribution ## Dashboard Statistics The real-time dashboard displays: - Total trades, wins, and losses - Win rate percentage - Profit factor calculation - Exit type breakdown (TP / Trailing / SL hits) - Net profit and maximum drawdown - Current position status ## Best Practices - **Timeframe Selection**: Test on multiple timeframes to find optimal settings for your trading style - **Parameter Optimization**: Adjust TP/SL/Trailing parameters based on instrument volatility - **Time Filter Usage**: Enable time filter to avoid low-liquidity periods - **Confluence Approach**: Consider using "Both" entry mode for higher probability setups - **Risk Management**: Always use position sizing appropriate to your account ## Limitations - Indicator performance varies across different market conditions - Historical statistics shown do not guarantee future results - Backtest results may differ from live trading due to slippage and spread - Works best on liquid markets with consistent price action ## Important Disclaimer **This indicator is for educational and analytical purposes only.** - This is not financial advice or a recommendation to trade - Past performance does not guarantee future results - Trading involves substantial risk of loss - Always use proper risk management strategies - Consider your financial situation and risk tolerance before trading - Seek advice from qualified financial professionals if needed If you find this indicator helpful for your analysis, please consider giving it a **Boost** (👍) to support future development and help other traders discover it. For more trading tools, educational content, and indicator updates, feel free to **follow @ionmarpie** on TradingView. Your support motivates continued improvement and new releases! Happy trading and always manage your risk wisely! 📈
Pine Script®指標
由ionmarpie提供
Custom Time-Range Breakout with 4x EMA Filter Time-Range Breakout Monitor with 4x EMA FilterThis indicator is a powerful tool designed to capture volatility during specific market hours (like London or New York opens). It monitors a custom price range (High/Low) and tracks whether these levels are breached, using a 4x EMA ribbon as a trend filter.Key Features:Adjustable Range: Define your own start and end time (hours and minutes) to mark the session range.Breakout Tracking: The indicator visually tracks if the High or Low of the session has been taken (Broken) and displays the status in a real-time dashboard.4x EMA Ribbon: Integrated trend filter with specific color coding for quick visual confirmation.Smart Alerts: Built-in alerts for both Bullish (Up) and Bearish (Down) breakouts.EMA Color Legend (Rafał's Setup):EMA PeriodColorRoleEMA 20GrayShort-term momentumEMA 50GreenMedium-term trend confirmationEMA 100YellowIntermediate support/resistanceEMA 200RedLong-term baseline (The "Trendline")How to Use:Set the Session: Input your target range in the settings (e.g., 09:00 - 10:00).Monitor the Dashboard: The top-right table shows "TAK" (YES) or "NIE" (NO) if the levels have been breached during the current day.Confirm the Trend: * Long: Price breaks above the range AND is supported by the Green (50) and Red (200) EMAs.Short: Price breaks below the range AND is trending under the Green (50) and Red (200) EMAs.Settings:Start/End Hour & Minute: Full control over the tracked time window.Alerts: Enable "Wybicie Górą" or "Wybicie Dołem" in the TradingView Alert menu.
Pine Script®指標
由koczkoda提供
1
Step Channel█ OVERVIEW "Step Channel" is a technical analysis indicator that builds a dynamic price channel based on market volatility (ATR) and a step-like logic for updating levels. It is ideal for traders using market structure analysis, price action, as well as trend-following, range-bound, and breakout strategies. Thanks to the adjustable channel width, the indicator can be easily adapted to various instruments, timeframes, and trading styles – from scalping to swing trading. █ CONCEPTS The indicator is a universal trading tool that supports trend detection, trading in consolidation, and breakout-based strategies. The key feature is the step-like update of the baseline (MID). Unlike classic moving averages: - the MID line does not react to every candle - it updates only after breaking a volatility-based level - each breakout creates a new "step" in the market structure This keeps the market structure clear, with regime changes being distinct and objective. █ FEATURES ATR-based dynamic channel The channel width automatically adjusts to current volatility – widening during high-activity periods and narrowing in consolidations, ensuring constant adaptation to market conditions. Structural MID line Central, adaptive trend line updated in steps after a breakout. Inner levels (IN) The zone of typical price movement within the structure. These levels change only after a sustained breakout confirmed by candle close – this exact breakout generates the structural signals (Step UP/DOWN). Outer levels (OUT) An orientational zone indicating the potential reach of a strong, single price move beyond the current structure. Price never stays in this zone (levels shift immediately after breaking IN). Primarily used as: - main take-profit levels - dynamic SL in aggressive strategies Structural signals Generated exclusively at the moment of a real structure change: - Step UP – upside breakout - Step DOWN – downside breakout Signals appear only on the breakout candle. Built-in alerts Instant notifications for: - Step UP - Step DOWN █ HOW TO USE Adding to the chart Search in the TradingView indicators library: "Step Channel" or paste the code in Pine Editor. Key parameter configuration: - ATR Length – longer value = more stable structure (fewer signals) - Inner Multiplier – sensitivity of inner levels (lower = narrower operational channel) - Outer Multiplier – reach of outer extremes (higher = further TP) - Price position interpretation: - near MID → market equilibrium, potential consolidation - in IN zone → healthy, controlled trend move - in OUT zone → only an orientational target for extreme move (price does not stay in this zone) █ APPLICATIONS - Trend strategies – entries after Step UP/DOWN signal in the direction of the new trend, re-entry at MID, trailing stop along MID; generally positions only in line with the current structure direction - Range trading – buying at lower IN/OUT and selling at upper IN/OUT in the absence of structure change - Breakout strategies – entries on breakout candle close with volume or HTF confirmation - Position management – SL behind MID or opposite IN, TP at OUT (full) or IN (partial) - Scalping on low timeframes – quick trades inside the IN channel with tight SL - Swing trading – trend filtering on HTF and precise entries on LTF after structural signal █ NOTES - works on all markets and timeframes - requires individual adjustment of multipliers to the instrument and trading style - recommended to use with additional indicators, e.g. RSI, Fibonacci, pivots
Pine Script®指標
由Uncle_the_shooter提供
3
Order Block Finder | Gold | ProjectSyndicate🥇 ProjectSyndicate Gold Order Block Finder 📌 Institutional Order Blocks for XAUUSD Built for Gold’s Volatility The ProjectSyndicate Gold Order Block Finder is a professional-grade TradingView indicator engineered specifically for XAUUSD / Gold traders who want clean, high-probability institutional supply & demand zones on their chart. Gold moves fast, sweeps liquidity often, and loves sharp displacement. This tool is tuned to match that behavior—so you can quickly spot the zones where smart money likely stepped in, and plan entries, targets, and invalidations with confidence. ✅ 🚀 Why Gold Traders Like It ✅ Made for XAUUSD: Detection is tuned for Gold’s unique volatility and impulse structure 🏦 Institutional Zone Detection: Finds the last opposing candle before a true displacement + structure break 🧹 Auto-Cleanup (Mitigation): Zones automatically disappear when invalidated (no clutter) 📦 Clean Visualization: Professional OB boxes that extend into live price action ⚡ Pine Script v6: Built on the latest TradingView engine for stability and speed 🧠 Detection Logic Simple, Effective, Battle-Tested 📈 Bullish Order Block (Demand): The last bearish candle before a strong bullish displacement that breaks market structure (BOS) 📉 Bearish Order Block (Supply): The last bullish candle before a strong bearish displacement that breaks market structure (BOS) 💥 Displacement Filter Power Move Confirmation: Zones are validated only when the impulse move meets a minimum strength threshold (default: 1.3× candle range)—helping filter out weak noise and low-quality blocks. 🛠 Recommended Gold Settings (XAUUSD) Use these presets to match Gold’s typical behavior across higher-impact timeframes: Timeframe | Swing Length | Displacement M5 | 5–7 | 1.2 – 1.4 M10 | 5–7 | 1.2 – 1.4 M30 | 5–7 | 1.2 – 1.4 H1 | 7–9 | 1.3 – 1.6 H4 | 8–10 | 1.5 – 2.0 💡 Tip: If you want more signals, reduce Swing Length. If you want higher quality only, increase Displacement. ✅ Best Use-Cases on Gold 🎯 Mark premium supply/demand zones without manual drawing 🧲 Wait for price to return to the OB for cleaner entries 🛡️ Use OB boundaries for clear invalidation + stop placement 📊 Combine with trend bias / liquidity sweeps / session levels for extra confirmation
Pine Script®指標
由ProjectSyndicate提供
39
MidZone Breakout Pro 🚀 MidZone Breakout Pro — Smart Balance Zone Signals 🧭 Equilibrium-Based Market Insight MidZone Breakout Pro identifies key balance levels in the market and highlights directional opportunities when price decisively moves away from equilibrium. 📐 Dynamic Midpoint Zone Mapping Automatically plots a central price balance zone derived from recent market ranges, helping traders visualize fair value and expansion areas. 🎯 Clear Buy & Sell Signals Generates clean bullish and bearish signals when price exits the balance zone with momentum. 🎨 High-Visibility Zone Visualization Color-coded zones, background shading, and bold signal markers provide instant clarity without chart clutter. 🎚 Customizable Sensitivity Adjustable lookback period and zone width allow seamless adaptation across scalping, intraday, and swing trading. 🕰 Non-Repainting Signals All signals are calculated using confirmed price action and remain stable on historical charts. ⚡ Lightweight & Fast Performance Optimized design ensures smooth performance across all instruments and timeframes. 🛠 How to Use (Safe Version) 📉 **Buy Signal**: Appears when price moves strongly above the balance zone 📈 **Sell Signal**: Appears when price moves strongly below the balance zone 🟨 **Neutral Zone**: Indicates consolidation or equilibrium conditions Best used in combination with trend direction, support/resistance, or volume confirmation. ⚠️ Disclaimer: This indicator is for educational and analytical purposes only. It does not provide financial advice. Always apply proper risk management.
Pine Script®指標
由ChandraBose2002提供
3
Argentina Bonds TIR - Sovereign Bond Yield Curves Indicator# Argentina Bonds TIR A comprehensive indicator that calculates the Internal Rate of Return (IRR/TIR) for Argentine sovereign bonds and projects future price curves at fixed yield levels. ## Features **Real-time TIR Calculation** - Calculates current yield based on market price and expected cashflows - Uses Newton-Raphson iterative method for precise IRR calculation - Day count convention: Actual/365 with T+1 settlement **Automatic Currency Conversion** - Works with any trading currency: ARS, USD MEP (D suffix), USD Cable (C suffix) - Automatically converts prices using AL30/AL30D/AL30C ratios - Bonares use MEP conversion, Globales use Cable conversion **Yield Curve Projections** - Projects price curves 150 bars into the future (configurable) - Fixed TIR lines at 7%, 8%, 9%, 10%, 11%, 12% (each toggleable) - Current TIR line showing price trajectory at current yield - Custom TIR line with user-defined yield value **Clear Labeling** - Labels positioned near current date for easy reading (configurable offset) - Color-coded lines for quick identification - Info panel showing bond details, prices, TIR, and exchange rates ## Supported Bonds **Bonares** (Argentina legislation, USD MEP): AE38, AL29, AL30, AL35, AL41, AN29 **Globales** (Foreign legislation, USD Cable): GD29, GD30, GD35, GD38, GD41, GD46 ## How to Use 1. Apply indicator to any supported bond symbol (e.g., BCBA:AL30D, BCBA:GD35C) 2. The indicator auto-detects bond type and currency 3. View current TIR in the info panel 4. Use projected lines to visualize price targets at different yield levels 5. Toggle individual TIR lines on/off as needed 6. Add a custom TIR line for specific yield analysis ## Settings **Display**: Show/hide current TIR line, projection bars (30-300), label offset in days **Fixed TIR Lines**: Individual toggles for 7%, 8%, 9%, 10%, 11%, 12% **Custom TIR**: Enable custom TIR line, set value (%), choose color **Colors**: Customize colors for all lines ## Info Panel Shows bond ticker, type (Bonar/Global), trading currency, current price, native price, current TIR percentage, MEP and CCL exchange rates. --- ## Español Indicador que calcula la Tasa Interna de Retorno (TIR) para bonos soberanos argentinos y proyecta curvas de precios futuros a niveles fijos de rendimiento. ### Características - Cálculo de TIR en tiempo real usando método Newton-Raphson - Conversión automática de moneda (ARS, USD MEP, USD Cable) - Líneas de TIR fijas al 7%, 8%, 9%, 10%, 11%, 12% - Línea de TIR personalizada configurable - Panel informativo con detalles del bono y tipos de cambio ### Bonos Soportados - **Bonares** (USD MEP): AE38, AL29, AL30, AL35, AL41, AN29 - **Globales** (USD Cable): GD29, GD30, GD35, GD38, GD41, GD46 --- **DISCLAIMER**: This indicator is for informational and educational purposes only. Eco Valores S.A. does NOT provide investment advice or recommendations. Consult a qualified financial advisor before making investment decisions. **AVISO LEGAL**: Este indicador es solo para fines informativos y educativos. Eco Valores S.A. NO brinda asesoramiento ni recomendaciones de inversión. Consulte con un asesor financiero calificado antes de invertir.
Pine Script®指標
由Eco Valores提供
Quadruple Moving Average with Alerts [FitzTello]Quadruple Moving Average with Alerts (Quad MA) Quad MA plots four Simple Moving Averages (SMAs) on the chart to help you quickly visualize trend direction, dynamic support/resistance zones, and key mean-reversion areas. You can choose a built-in preset for the primary trend pair (7–21, 11–22, or 50–200) or switch to Custom to define your own M1 and M2 lengths. Two additional SMAs (M3 and M4) are always available for extra structure (e.g., intermediate trend, pullback filter, or multi-timeframe alignment). Alerts included: The script provides separate alert conditions for each SMA whenever price crosses above or below that line (effectively a “touch/cross” event), making it easy to automate notifications when price interacts with your chosen moving-average levels. Inputs: Preset selector, custom MA lengths (M1–M4), and source (default: close).
Pine Script®指標
由Fitztello提供
World sessionsThe indicator highlights trading sessions of major global exchanges (Tokyo, Hong Kong, Frankfurt, London, New York, Chicago). It highlights them with horizontal dashed lines from the start to the end of each session. At the session start, it draws a label with the exchange name above the bar, with adjustable height based on ATR. With gratitude to God the Father, the Lord Jesus Christ - the Son of God, and the Holy Spirit. // © icman — ic380.com // Open Source: исходный код открыт (MPL-2.0)
Pine Script®指標
由ic-man提供
Professional Grid & Reversal Bot v10 (Binance Style)Professional Grid & Reversal Bot v10 (Binance Style) – Open Source & Educational About this Script: This script is an advanced Grid Trading & Smart Reversal strategy, inspired by professional Binance-style execution. It is designed as an educational, open-source tool for traders who want to understand market dynamics, grid logic, and risk management. How it Works: 1️⃣ Grid Execution: • Divides the price range between the high and low into multiple levels (Grids). • Opens Buy orders in the lower half and Sell orders in the upper half. • Levels are calculated dynamically based on the highest and lowest prices over a selected lookback period. 2️⃣ Smart Reversal System: • Detects price touches on the high or low range boundaries to identify potential reversal points. • Opens Buy orders at the lows and Sell orders at the highs using a configurable confirmation percentage (revPct). • Helps traders capture short-term price swings effectively. 3️⃣ Risk & Size Management: • Position sizing based on USD amount and leverage. • Automatic Take Profit (TP) and Stop Loss (SL) for every trade. • Controls overtrading via the "pyramiding" parameter (max open trades). 4️⃣ Advanced Visualization: • Plots the grid range with high/low levels and fills the background for clear context. • Highlights potential Supply and Demand Zones. • Displays a dynamic "Binance-style" Order Book table showing Side, Price, Quantity, and PnL. 5️⃣ Key Counters & Indicators: • levelsArr → Stores all grid levels for execution and plotting. • touchedHigh / touchedLow → Monitors range touches to trigger reversals. • strategy.openprofit → Displays live open trade PnL directly on the chart. Additional Features: • Supports both English and Arabic languages. • Dark Theme optimized for readability. • Dynamic control panel updates on every bar. • Flexible settings for Auto or Manual grid range updates. User Guidance: • This script is for educational purposes only; it does not guarantee profits. • We recommend adjusting Grid Levels, Reversal Percentage, and Trade Size to experiment with different strategies. Community Engagement: • Suggestions and improvements are welcome! 💡 • If you have ideas for new features, let's develop them together to enhance learning. • Please support the script with a Like & Boost if you find it useful. • Encourages knowledge sharing to improve collective performance. License: Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) Free for educational use only. Please give credit to the author when sharing or modifying the script.
Pine Script®策略
由nazaralgeze提供