立即開始

中心震盪指標

Momentum Clarity Engine📘 Description - Momentum Clarity Engine Momentum Clarity Engine (MC-Engine) is a visual momentum-context indicator designed to help traders clearly identify trend direction, momentum strength, and low-quality market conditions using a disciplined combination of MACD and RSI. Rather than generating buy or sell signals, MC-Engine focuses on clarity and risk control by visually classifying price action into intuitive momentum states and highlighting periods where trading conditions are unfavorable. 🔍 How it works The indicator combines: MACD Histogram → momentum direction and strength RSI → bullish vs bearish pressure balance Based on this confluence, price candles are colored to reflect market state: Strong Bullish Momentum → Dark Green (solid) Weak Bullish Momentum → Light Green (transparent) Strong Bearish Momentum → Dark Red (solid) Weak Bearish Momentum → Light Red (transparent) No-Trade Zone → Muted Orange (high transparency) Candle opacity dynamically adapts to MACD histogram strength, allowing traders to visually sense when momentum is expanding, weakening, or lacking conviction. 🟠 No-Trade Zone (Key Feature) The No-Trade zone highlights periods of: Low momentum RSI balance / indecision Choppy or transitional price action These conditions often result in poor risk-reward. The muted orange color is intentionally designed to encourage patience and discipline. ✅ How to use MC-Engine MC-Engine is best used as a trade filter and context tool, not as a standalone strategy. Common use cases: Confirming trend strength before entries Avoiding trades during low-momentum chop Filtering breakouts and pullbacks Intraday trading on 1-minute to 15-minute charts Futures, indices, equities, and crypto markets Recommended to pair with: Market structure Trendlines VWAP Support & resistance Higher-timeframe context ⚠️ Important Notes This indicator does not provide buy or sell signals No repainting or future-looking logic Designed for educational and analytical purposes only Always apply proper risk management 🧠 Philosophy The goal is not to trade more — the goal is to trade when conditions are clear. Momentum Clarity Engine helps traders participate during strong momentum and stand aside during uncertainty.
Pine Script®指標
由Market_Logic_India提供
Photon Price Action Scanner [JOAT]Photon Price Action Scanner - Multi-Pattern Recognition with Adaptive Filtering Introduction and Purpose Photon Price Action Scanner is an open-source overlay indicator that automates the detection of 15+ candlestick patterns while filtering them through multiple confirmation layers. The core problem this indicator solves is pattern noise: raw candlestick pattern detection produces too many signals, most of which fail because they lack context. This indicator addresses that by combining pattern recognition with trend alignment, volume-weighted strength scoring, velocity confirmation, and an adaptive neural bias filter. The combination of these components is not arbitrary. Each filter addresses a specific weakness in standalone pattern detection: Trend alignment ensures patterns appear in favorable market structure Volume-weighted strength filters out weak patterns with low conviction Velocity confirmation identifies momentum behind the pattern Neural bias filter adapts to recent price behavior to avoid counter-trend signals What Makes This Indicator Original While candlestick pattern scanners exist, this indicator's originality comes from: 1. Multi-Layer Filtering System - Patterns must pass through trend, strength, velocity, and neural bias filters before generating signals. This dramatically reduces false positives compared to simple pattern detection. 2. Adaptive Neural Bias Filter - A custom momentum-adjusted EMA that learns from recent price action using a configurable learning rate. This is not a standard moving average but an adaptive filter that accelerates during trends and smooths during consolidation. 3. Pattern Strength Scoring - Each pattern receives a strength score based on volume ratio and body size, allowing traders to focus on high-conviction setups rather than every pattern occurrence. 4. Smart Cooldown System - Prevents signal overlap by enforcing minimum bar spacing between pattern labels, keeping charts clean even when "Show All Patterns" is enabled. How the Components Work Together Step 1: Pattern Detection The indicator scans for 15 candlestick patterns using precise mathematical definitions: // Example: Bullish Engulfing requires the current bullish candle to completely // engulf the previous bearish candle with a larger body isBullishEngulfing() => bool pattern = close < open and close > open and open <= close and close >= open and close - open > open - close pattern // Example: Three White Soldiers requires three consecutive bullish candles // with each opening within the previous body and closing higher isThreeWhiteSoldiers() => bool pattern = close > open and close > open and close > open and close < close and close < close and open > open and open < close and open > open and open < close pattern Step 2: Strength Calculation Each detected pattern receives a strength score combining volume and body size: float volRatio = avgVolume > 0 ? volume / avgVolume : 1.0 float bodySize = math.abs(close - open) / close float baseStrength = (volRatio + bodySize * 100) / 2 This ensures patterns with above-average volume and large bodies score higher than weak patterns on low volume. Step 3: Trend Alignment Patterns are checked against the trend direction using an EMA: float trendEMA = ta.ema(close, i_trendPeriod) int trendDir = close > trendEMA ? 1 : close < trendEMA ? -1 : 0 Bullish patterns in uptrends and bearish patterns in downtrends receive priority. Step 4: Neural Bias Filter The adaptive filter uses a momentum-adjusted EMA that responds to price changes: neuralEMA(series float src, simple int period, simple float lr) => var float neuralValue = na var float momentum = 0.0 if na(neuralValue) neuralValue := src float error = src - neuralValue float adjustment = error * lr momentum := momentum * 0.9 + adjustment * 0.1 neuralValue := neuralValue + adjustment + momentum neuralValue The learning rate (lr) controls how quickly the filter adapts. Higher values make it more responsive; lower values make it smoother. Step 5: Velocity Confirmation Price velocity (rate of change) must exceed the average velocity for strong signals: float velocity = ta.roc(close, i_trendPeriod) float avgVelocity = ta.sma(velocity, i_trendPeriod) bool velocityBull = velocity > avgVelocity * 1.5 Step 6: Signal Classification Signals are classified based on how many filters they pass: Strong Pattern : Pattern + strength threshold + trend alignment + neural bias + velocity Ultra Pattern : Strong pattern + gap in same direction + velocity confirmation Watch Pattern : Pattern detected but not all filters passed Detected Patterns Classic Reversal Patterns: Bullish/Bearish Engulfing - Complete body engulfment with larger body Hammer - Long lower wick (2x body), small upper wick, bullish context Shooting Star - Long upper wick (2x body), small lower wick, bearish context Morning Star - Three-bar bullish reversal with small middle body Evening Star - Three-bar bearish reversal with small middle body Piercing Line - Bullish candle closing above midpoint of previous bearish candle Dark Cloud Cover - Bearish candle closing below midpoint of previous bullish candle Bullish/Bearish Harami - Small body contained within previous larger body Doji - Body less than 10% of total range (indecision) Advanced Patterns (Optional): Three White Soldiers - Three consecutive bullish candles with rising closes Three Black Crows - Three consecutive bearish candles with falling closes Tweezer Top - Equal highs with reversal candle structure Tweezer Bottom - Equal lows with reversal candle structure Island Reversal - Gap isolation creating reversal structure Dashboard Information The dashboard displays real-time analysis: Pattern - Current detected pattern name or "SCANNING..." Bull/Bear Strength - Volume-weighted strength scores Trend - UPTREND, DOWNTREND, or SIDEWAYS based on EMA RSI - 14-period RSI for momentum context Momentum - 10-period momentum reading Volatility - ATR as percentage of price Neural Bias - BULLISH, BEARISH, or NEUTRAL from adaptive filter Action - ULTRA BUY/SELL, BUY/SELL, WATCH BUY/SELL, or WAIT Visual Elements Pattern Labels - Abbreviated codes (BE=Engulfing, H=Hammer, MS=Morning Star, etc.) Neural Bias Line - Adaptive trend line showing filter direction Gap Boxes - Cyan boxes highlighting price gaps Action Zones - Dashed boxes around strong pattern areas Velocity Markers - Small circles when velocity confirms direction Ultra Signals - Large labels for highest conviction setups How to Use This Indicator For Reversal Trading: 1. Wait for a pattern to appear at a key support/resistance level 2. Check that the Action shows "BUY" or "SELL" (not just "WATCH") 3. Confirm the Neural Bias aligns with your trade direction 4. Use the strength score to gauge conviction (higher is better) For Trend Continuation: 1. Identify the trend using the Trend row in the dashboard 2. Look for patterns that align with the trend (bullish patterns in uptrends) 3. Ultra signals indicate the strongest continuation setups For Filtering Noise: 1. Keep "Show All Patterns" disabled to see only filtered signals 2. Increase "Pattern Strength Filter" to see fewer, higher-quality patterns 3. Enable "Velocity Confirmation" to require momentum behind patterns Input Parameters Scan Sensitivity (1.0) - Overall detection sensitivity multiplier Pattern Strength Filter (3) - Minimum strength score for strong signals Trend Period (20) - EMA period for trend determination Show All Patterns (false) - Display all patterns regardless of filters Advanced Patterns (true) - Enable soldiers/crows/tweezer detection Gap Analysis (true) - Enable gap detection and boxes Velocity Confirmation (true) - Require velocity for strong signals Neural Bias Filter (true) - Enable adaptive trend filter Neural Period (50) - Lookback for neural bias calculation Neural Learning Rate (0.12) - Adaptation speed (0.01-0.5) Timeframe Recommendations 1H-4H: Best balance of signal frequency and reliability Daily: Fewer but more significant patterns 15m-30m: More signals, requires tighter filtering (increase strength threshold) Limitations Pattern detection is mechanical and does not consider fundamental context Neural bias filter may lag during rapid trend reversals Gap detection requires clean price data without after-hours gaps Strength scoring favors high-volume patterns, which may miss valid low-volume setups - Made with passion by officialjackofalltrades
Pine Script®指標
由officialjackofalltrades提供
3
EMA Slope - RSI Indicator# EMA Slope - RSI Indicator ## Script Description (for Publishing Page) **EMA Slope - RSI Indicator** combines normalized EMA slope momentum analysis with RSI divergence detection and momentum comparison to create a visual signal indicator with five distinct signal types. The indicator's originality lies in its unique "No Trade Zone" (NTZ) concept applied to slope momentum, combined with centered RSI format for direct comparison, and multiple complementary signal methods that work together to identify both trend-following and reversal opportunities across different market conditions. **Core Concept - EMA Slope Normalization:** Calculates rate of change of long MA (default 160 EMA) by comparing current value to N bars ago (default 3 bars). Raw slope difference normalized to -100 to +100 scale using 500-bar rolling range: normalizedSlope = 100 * (longMA - longMA ) / (highest(maDF, 500) - lowest(maDF, 500)). Creates consistent momentum oscillator comparable across price levels and timeframes. **No Trade Zone (NTZ) Logic:** NTZ (±8 default) creates neutral zone where slope momentum is too weak for reliable signals. Indicator only triggers NTZ Cross signals when slope crosses out of threshold zone, ensuring signals occur only when momentum is sufficiently strong. **Centered RSI Format (RSI-50):** Traditional RSI (0-100 range) difficult to compare with slope. This indicator uses centered RSI = (RSI - 50), creating -50 to +50 range zero-centered on same scale as normalized slope. Enables direct visual and mathematical comparison between RSI and slope momentum, enabling Slope-RSI exhaustion detection and RSI-Slope Oscillator signals. **Component Integration:** Five signal types target different market conditions. NTZ Cross and Acceleration target trend-following when momentum strong. RSI Divergence and Slope-RSI Divergence target reversals when price/momentum diverge. RSI-Slope Oscillator targets momentum alignment when RSI and slope converge. Multi-method approach provides signals across trending, reversing, and ranging markets. ### 📊 Technical Calculations **Slope Normalization:** maDF = longMA - longMA , normalized: maDf = 100 * maDF / (highest(maDF, 500) - lowest(maDF, 500)), ranges -100 to +100. **Acceleration Detection:** maAcce = abs(maDf - maDf ) * smoothBars * 2, normalized: maAcc = 50 * maAcce / highest(maAcce, 200). Values above threshold (35 display, 40 signals) indicate sudden momentum shifts. Visualized as colored circles: cyan (bullish), red (bearish). **RSI Calculation:** rsi = sma(rsi(source, length), smoothing), centered: cRsi = rsi - 50 (ranges -50 to +50). Smoothed using SMA (default 3 bars) to reduce noise. **RSI Divergence:** Uses pivot high/low detection on smoothed RSI. Pivot lookback = 16 - sensitivityInput (inverse: sensitivity 6 = 10-bar lookback, sensitivity 10 = 6-bar lookback). Compares price pivots (actual high/low including wicks) against RSI pivots. Bullish: priceLowerLow AND rsiHigherLow. Bearish: priceHigherHigh AND rsiLowerHigh. Stores multiple previous pivots (default 8 max) for comparison. **Slope-RSI Exhaustion:** Compares normalized slope against centered RSI on same scale. Bearish: slope accelerating up (delta > 0, slope > NTZ) BUT RSI declining (cRsi < cRsi AND cRsi < cRsi ). Bullish: slope accelerating down (delta < 0, slope < -NTZ) BUT RSI rising. Gap threshold (default 10.0 points) filters noise. Visualized with dashed lines and gap labels. **RSI-Slope Oscillator:** State machine tracks cross events (rsiSlopeCrossUp = cRsi > maDf AND cRsi <= maDf ), waits for confirmation: both RSI and slope heading same direction. Long: RSI crosses above slope AND both heading UP. Short: RSI crosses below slope AND both heading DOWN. Useful for range-bound markets. **Stretch Filter:** maPercentDiff = (longMA - shortMA) / shortMA * 100. Blocks long signals if longMA > shortMA by threshold (overextended up). Blocks short signals if shortMA > longMA by threshold (overextended down). Default 0.45% prevents signals when MAs too far apart. **Delta Calculation:** Measures change in normalized slope between bars. Timeframe mode: compares current confirmed slope with previous confirmed (more reliable, slight delay). Standard mode: compares current with previous bar (faster, may use unconfirmed). Minimum threshold (default 3.4) filters weak momentum changes. **Trailing Stop (Blackflag FTS Swingarm):** Uses Wilder's MA of true range. Modified mode: trueRange = max(HiLo, HRef, LRef) with enhanced gap handling. Unmodified: standard true range. Trailing stop calculated based on ATR factor and price trend direction. Separate settings for divergence signals (wider stops, grace periods). ### 🚀 Signal Types and Conditions **1. NTZ Cross Signals:** Long: Slope crosses above +NTZ (default +8) AND positive delta ≥ threshold (default 3.4) AND stretch filter allows AND optional trend confirmation (short MA > long MA). Short: Slope crosses below -NTZ AND negative delta ≥ threshold AND filters allow. Exit: Slope re-enters NTZ OR reverses direction for confirmation bars OR trailing stop. **2. Acceleration Signals:** Long: Acceleration ≥ threshold (default 40) AND slope above NTZ AND positive delta sufficient AND filters allow. Short: Acceleration ≥ threshold AND slope below -NTZ AND negative delta sufficient AND filters allow. Visual: Colored circles (cyan bullish, red bearish). Works independently to catch sudden momentum bursts. **3. RSI Divergence Signals:** Bullish: Price lower low while smoothed RSI higher low, detected via pivot comparison (default up to 8 pivots). Bearish: Price higher high while RSI lower high. Optional Slope-RSI confirmation. Visual: Purple lines (bearish), lime lines (bullish). Exit: Divergence-specific trailing stop (wider ATR, grace period). **4. Slope-RSI Divergence Signals:** Bullish: Slope accelerating down (negative delta, slope < -NTZ) BUT RSI rising over lookback AND gap exceeds threshold (default 10.0 points). Bearish: Slope accelerating up (positive delta, slope > NTZ) BUT RSI declining AND gap exceeds threshold. Visual: Orange triangles (bullish exhaustion), yellow triangles (bearish exhaustion) with dashed lines. Exit: Divergence-specific trailing stop. **5. RSI-Slope Oscillator Signals:** Long: RSI crosses above slope AND both heading upward. Short: RSI crosses below slope AND both heading downward. State machine tracks cross then confirms direction. Exit: Opposite oscillator condition (allows reversal) OR trailing stop after grace period. ### 📖 How to Use **Adding to Chart:** TradingView → Indicators → Search "EMA Slope - RSI Indicator" → Add (displays in separate pane below price). **Visual Elements:** Colored area = normalized EMA slope (Green = bullish above NTZ, Red = bearish below -NTZ, Gray = NTZ zone). Blue line = Centered RSI (-50 to +50). Colored circles = Acceleration (Cyan = bullish, Red = bearish). Green triangles (↑) = Long signals (bottom). Red triangles (↓) = Short signals (top). Orange X = Exit signals. Dashed lines = NTZ boundaries. Purple/Lime lines = RSI divergences. Orange/Yellow triangles = Slope-RSI exhaustion. Table (top-right) = Current Slope, RSI, Gap values. **Parameter Configuration:** MA Settings: Short 40 (stretch filter), Long 160 (slope), Types: SMA/EMA/DEMA/TEMA/WMA/VWMA/SMWMA/SWMA/HMA. Ratios: 20/80 (fast), 40/160 (standard), 50/200 (slow). Core: NTZ Threshold 8 (5-6 more signals, 10-12 stronger), Min Delta 3.4 (5-10 stronger, 1-3 sensitive), Max Stretch 0.45% (0.3% conservative, 1.0% permissive, 0 disable), Use Timeframe Delta true (confirmed bar vs previous bar). RSI: Length 14, Smoothing 3, Source close. Divergence: Sensitivity 6 (higher = more sensitive, 6 = 10-bar lookback, 10 = 6-bar lookback), Max Peaks 8 (2-15 range), Show Divergences true. Slope-RSI: Lookback 4 (2-10, higher = conservative), Min Gap 10.0 pts (0-100, higher = strong only, 0 disable), Show Exhaustion true. Signal Enables: NTZ Cross true, Acceleration true, RSI Divergence false, Slope-RSI Divergence true, RSI-Slope Oscillator true, Require Slope-RSI Confirmation false. Exit: Confirmation Bars 4 (0-10, 0 immediate, 2-4 filters false), Show Trailing Stop true, Trail Type Modified/Unmodified, ATR Period 10, ATR Factor 4.0 (2-3 tight, 4 standard, 5-6 wide), Divergence Grace 3 bars, Divergence ATR 4.0 (recommend 5-8), Oscillator Grace 3 bars, Oscillator ATR 4.0. **Alerts:** Right-click indicator pane → Add Alert → Choose condition (Long/Short Entry/Exit) → Configure notifications. **Interpreting Signals:** Trending Markets: Focus NTZ Cross and Acceleration, higher NTZ (10-12) for stronger signals, use trend confirmation. Reversal Opportunities: Enable RSI Divergence and Slope-RSI Divergence, look for exhaustion markers and divergence lines, use wider stops. Range-Bound: Enable RSI-Slope Oscillator, signals when RSI and slope align, allows position reversal. Multi-Timeframe: Higher TF for trend, lower TF for timing, stronger when aligned. Market Adjustments: Crypto 20/80 MA, NTZ 6-7, Delta 4-5 | Forex 40/160 MA, NTZ 8, Delta 3.4 | Stocks 50/200 MA, NTZ 10-12, Delta 2-3. ### 📈 Use Cases Day Trading (5m-15m, fast MAs 20/80), Swing Trading (1h-4h, standard 40/160), Position Trading (4h-Daily, slow 50/200), Trend Following (NTZ Cross/Acceleration in trends), Reversal Trading (RSI Divergence/Slope-RSI at reversals), Range Trading (RSI-Slope Oscillator in choppy markets), Momentum Analysis (Centered RSI and normalized slope comparison), Trend Exhaustion Detection (Slope-RSI exhaustion markers). ### ⚠️ Important Disclaimer **THIS IS NOT FINANCIAL ADVICE** This indicator is for educational and informational purposes only. Trading involves substantial risk of loss and is not suitable for all investors. Past performance does not guarantee future results. No guarantee of accuracy - signals may be false. Not professional financial advice - consult a qualified advisor. Use only as part of comprehensive analysis. Always use proper risk management. Combine with other analysis techniques before making trading decisions. Indicator signals don't guarantee profitable trades. You are solely responsible for trading decisions and risk management. By using this indicator, you acknowledge understanding the risks and that you use it at your own risk. Never invest more than you can afford to lose. Works on all markets: Crypto, Forex, Stocks, Commodities, Futures ## Short Description (for Script Header - 200-300 chars) Visual signal indicator combining normalized EMA slope momentum (No Trade Zone concept) with centered RSI format for direct comparison. Five signal types: NTZ momentum crosses, acceleration bursts, price-RSI divergences, slope-RSI exhaustion reversals, and RSI-slope oscillator alignment. Includes stretch filter, exit confirmation bars, and trailing stop exits with separate settings per signal type. ## Tags (for Publishing) EMA, Moving Average, Slope, Momentum, No Trade Zone, NTZ, Indicator, Technical Analysis, RSI, Relative Strength Index, Centered RSI, RSI-50, Divergence, Slope-RSI, Exhaustion, RSI-Slope Oscillator, Normalized Comparison, Stretch Filter, Trend Confirmation, Exit Confirmation, Trailing Stop, Alerts, Signals, Visual Signals, Entry Signals, Exit Signals, Crypto, Forex, Stocks, Futures, Swing Trading, Day Trading, Reversal Trading, Range Trading, Momentum Analysis ## Category **Indicators** → **Momentum**
Pine Script®指標
由xvelox_提供
Apex Adaptive TrailApex Adaptive Trail: Adaptive Volatility Trend System This custom trend-following indicator improves on standard SuperTrend implementations by addressing two key weaknesses: excessive whipsaws during high volatility and false signals in ranging markets. Core Logic: - Synthetic Heikin Ashi values are calculated internally (without changing chart candles) to provide smoother source data for trend detection. - ATR-based trailing stop with adaptive multiplier: dynamically adjusts between 0.8x and 1.5x the base factor based on current volatility (ATR / 50-period SMA of ATR). Widens in volatile conditions, tightens in quiet markets. - Weighted Confluence Score (0-100%): Combines four independent filters, each contributing 25%: • Price position relative to 21-period EMA (trend alignment) • ADX > 20 (momentum strength) • Choppiness Index < 60 (trending vs ranging detection) • Alignment with Daily EMA(50) trend direction Signals are only generated when price crosses the adaptive trail AND the confluence score exceeds 75% (standard) or 90% (MAX 🔥 ultra-strong). This combination significantly reduces low-quality entries compared to traditional SuperTrend crossovers. Key Features: - Dynamic confidence cloud (opacity based on score) - Real-time dashboard showing volatility state, active filters, trend bias, and estimated historical win rate - Optional dynamic/fixed profit targets - Fully customizable filters and adaptive behavior Usage: Best on 15m to 4H timeframes for trend-following strategies (Crypto, Forex, Indices). Enter on APEX signals, use trail as stop-loss, TP lines for partial exits. This script integrates established concepts into a unique adaptive framework with volatility-responsive risk management and multi-filter validation. Disclaimer: For educational and analysis purposes only. Past performance is not indicative of future results. Always use proper risk management. "This script combines established indicators (ATR trailing, ADX, Choppiness Index, EMA, MTF) into a unique adaptive system with dynamic volatility adjustment and weighted confluence scoring – features not found together in standard SuperTrend variations."
Pine Script®指標
由mentalExpert19609提供
6
Stochastic Extreme Oscillator [MatrixQuantLabs]Stochastic Extreme Oscillator is an enhanced stochastic-based oscillator designed to highlight market extremes, momentum shifts, and potential reversal zones with improved visual clarity and signal filtering. This indicator builds upon the classic Stochastic Oscillator by focusing on extreme zone behavior, peak & trough signals, and optional divergence detection, making it suitable for both discretionary and systematic traders. Key Features Extreme Zone Visualization • Multi-level overbought (80–100) and oversold (0–20) zones with adaptive color intensity help assess the strength and risk level of market extremes at a glance. Momentum-Aware Coloring • The %D line dynamically changes color based on its position relative to the zero line, providing an intuitive view of bullish, neutral, and bearish momentum states. Peak & Trough Signals • Optional bullish and bearish signals are triggered only when %K / %D cross occurs inside extreme zones, helping filter out low-quality signals in mid-range conditions. Regular Divergence Detection • Built-in bullish and bearish divergence detection based on pivot structure, allowing early identification of potential trend reversals. Clean & Focused Design • The indicator emphasizes the %D line as the primary signal source, while %K is used internally for logic, keeping the chart uncluttered and easy to read. Customization • Adjustable %K / %D lengths and smoothing • Toggle peak & trough signals on/off • Optional divergence detection with configurable pivot sensitivity • Designed to work across different markets and timeframes Usage Notes • Best used as a momentum and extreme-condition oscillator, not as a standalone trading system • Signals are most effective when combined with trend context, price structure, or higher-timeframe analysis • Divergence signals may appear with delay due to pivot confirmation logic Disclaimer This indicator is intended for educational and analytical purposes only and does not constitute financial advice. Always apply proper risk management and confirm signals with additional analysis.
Pine Script®指標
由MatrixQuantLabs提供
4
Area per IntervalDescription This indicator shades the area between 2 curves, an SMA and the nearest open/close to the SMA, and their intersections. The black labels with leader lines describe the calculated area of each shaded section, and the total area accumulated per total number of time intervals for that area. The additional value visible in the status line that is not displayed on the chart is, at any bar index (time interval), the current total area of the incomplete shaded area. Usage - The default color of the shaded areas denote the type of momentum being built before the cross. Green for bullish, red for bearish. - The area value of the shaded areas can be used as a capacity indicator, denoting imbalances between the previous and next crosses. - The area per interval value of the shaded areas can be used as a momentum indicator, denoting which area is carrying more price movement before the price crosses. - Similar to indicators that use dynamic price differences between OHLC data, moving averages, etc, confluence with other momentum indicators that use different elements creates additional confirmation. Conclusion Simple momentum indicator. Comment for possible updates that can be made.
Pine Script®指標
由HeavyVisor提供
RSI + MACD (RSI Divergence) V3.2 RSI + MACD (RSI Divergence) This indicator combines RSI divergence detection with a scaled MACD overlay to help traders visualize momentum structure and divergence more clearly in a single pane. Instead of using RSI and MACD as isolated signals, this script focuses on relative movement, swing structure, and divergence logic, making it especially useful for discretionary traders who analyze momentum behavior rather than fixed indicator levels. ________________________________________ Key Features RSI Divergence Engine • Detects Regular Bullish / Bearish Divergence • Optional Hidden Divergence (for trend continuation) • Uses confirmed pivot logic (left/right lookback) to avoid repainting • Adjustable divergence range to filter weak or overly distant signals RSI is shifted by -50 to center it around zero, allowing better visual alignment with MACD without affecting divergence logic. ________________________________________ Scaled MACD Overlay (Visual Momentum Only) • MACD, Signal, and Histogram are rescaled dynamically to match the RSI oscillator range • Designed for wave structure, phase comparison, and momentum timing • Not intended as a traditional MACD signal generator • Helps identify momentum agreement or disagreement with RSI divergence ________________________________________ Clean & Practical Design • Single pane display (no chart clutter) • Color warnings for RSI overbought / oversold zones • Adjustable scaling lookback for different markets and timeframes • Optimized for smooth performance and non-repainting behavior ________________________________________ How to Use • Best used on indices, crypto, and liquid forex pairs • Combine RSI divergence signals with: o Market structure o Support / resistance o Trend context • Use the MACD overlay to: o Confirm momentum shifts o Spot early loss of strength o Compare oscillator phase alignment This indicator is best suited for analysis and confirmation, not mechanical entry signals. ________________________________________ Notes • MACD values are scaled for visualization only and do not represent real MACD values • Divergence signals are confirmation-based, not predictive • No repainting once pivots are confirmed ________________________________________ Who Is This For? • Swing traders • Momentum & divergence traders • Traders who prefer structure-based confirmation over raw indicator signals • Anyone who wants RSI & MACD behavior in a single, readable oscillator Enjoy and happy trading! DISCLAIMER This script is intended for informational and educational purposes only. It does not constitute financial, investment, or trading advice. All trading decisions made based on its output are solely the responsibility of the user
Pine Script®指標
由MKhoa提供
Entropy Balance Oscillator [JOAT] Entropy Balance Oscillator - Chaos Theory Edition Overview Entropy Balance Oscillator is an open-source oscillator indicator that applies chaos theory concepts to market analysis. It calculates market entropy (disorder/randomness), balance (price position within range), and various chaos metrics to identify whether the market is in an ordered, chaotic, or balanced state. This helps traders understand market regime and adjust their strategies accordingly. What This Indicator Does The indicator calculates and displays: Entropy - Measures market disorder using return distribution analysis Balance - Price position within the high-low range, normalized to -1 to +1 Lyapunov Exponent - Estimates sensitivity to initial conditions (chaos indicator) Hurst Exponent - Measures long-term memory in price series (trend persistence) Strange Attractor - Simulated attractor points for visualization Bifurcation Detection - Identifies potential regime change points Chaos Index - Combined entropy and volatility score Market Phase - Classification as CHAOS, ORDER, or BALANCED How It Works Entropy is calculated using return distribution: calculateEntropy(series float price, simple int period) => // Calculate returns and their absolute values // Sum absolute returns for normalization // Apply Shannon entropy formula: -sum(p * log(p)) float entropy = 0.0 for i = 0 to array.size(returns) - 1 float prob = math.abs(array.get(returns, i)) / sumAbs if prob > 0 entropy -= prob * math.log(prob) entropy Balance measures price position within range: calculateBalance(series float high, series float low, series float close, simple int period) => float range = high - low float position = (close - low) / (range > 0 ? range : 1) float balance = ta.ema(position, period) (balance - 0.5) * 2 // Normalize to -1 to +1 Lyapunov Exponent estimates chaos sensitivity: lyapunovExponent(series float price, simple int period) => float sumLog = 0.0 for i = 1 to period float ratio = price > 0 ? math.abs(price / price ) : 1.0 if ratio > 0 sumLog += math.log(ratio) lyapunov := sumLog / period Hurst Exponent measures trend persistence: H > 0.5: Trending/persistent behavior H = 0.5: Random walk H < 0.5: Mean-reverting behavior Signal Generation Phase changes and extreme conditions generate signals: Chaos Phase: Normalized entropy exceeds chaos threshold (default 0.7) Order Phase: Normalized entropy falls below order threshold (default 0.3) Extreme Chaos: Entropy exceeds 1.5x chaos threshold Extreme Order: Entropy falls below 0.5x order threshold Bifurcation: Variance exceeds 2x average variance Dashboard Panel (Top-Right) Market Phase - Current phase (CHAOS/ORDER/BALANCED) Entropy Level - Normalized entropy value Balance - Current balance reading (-1 to +1) Chaos Index - Combined chaos score percentage Volatility - Current price volatility Lyapunov Exp - Lyapunov exponent value Hurst Exponent - Hurst exponent value Chaos Score - Overall chaos assessment Status - Current market status Visual Elements Entropy Line - Main oscillator showing normalized entropy Entropy EMA - Smoothed entropy for trend reference Balance Area - Filled area showing balance direction Chaos/Order Thresholds - Horizontal dashed lines Lyapunov Line - Step line showing Lyapunov exponent Strange Attractor - Circle plots showing attractor points Phase Space - Line showing phase space reconstruction Phase Background - Background color based on current phase Extreme Markers - X-cross for extreme chaos, diamond for extreme order Bifurcation Markers - Circles at potential regime changes Input Parameters Entropy Period (default: 20) - Period for entropy calculation Balance Period (default: 14) - Period for balance calculation Chaos Threshold (default: 0.7) - Threshold for chaos phase Order Threshold (default: 0.3) - Threshold for order phase Lyapunov Exponent (default: true) - Enable Lyapunov calculation Hurst Exponent (default: true) - Enable Hurst calculation Strange Attractor (default: true) - Enable attractor visualization Bifurcation Detection (default: true) - Enable bifurcation detection Suggested Use Cases Identify market regime for strategy selection (trend-following vs mean-reversion) Watch for phase changes as potential trading environment shifts Use Hurst exponent to assess trend persistence Monitor chaos index for volatility regime awareness Avoid trading during extreme chaos phases Timeframe Recommendations Best on 1H to Daily charts. Chaos metrics require sufficient data for meaningful calculations. Limitations Chaos theory concepts are applied as analogies, not rigorous mathematical implementations Lyapunov and Hurst calculations are simplified approximations Strange attractor visualization is conceptual Bifurcation detection uses variance as proxy Open-Source and Disclaimer This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management. - Made with passion by officialjackofalltrades
Pine Script®指標
由officialjackofalltrades提供
VAM Pro (Multi-Model) [Final]Volatility Adjusted Momentum (VAM) Pro+ is a professional quantitative tool designed to measure trend strength by normalizing momentum against market volatility. Standard momentum indicators often fail during high-volatility periods because they treat every price change the same regardless of market noise. This indicator solves that problem by scaling price changes based on their statistical significance using Z-Score logic. This Pro+ version is specifically optimized for Scalping and Intraday Trading by introducing advanced volatility estimators and mathematical horizon adjustments that superior to classic standard deviation models. The indicator allows you to choose the most suitable volatility model for your specific asset class. The Parkinson Volatility model is highly recommended for Crypto markets because it uses the High-Low range instead of just close prices, effectively capturing intraday wicks and liquidation spikes that standard deviation often misses. For Equities and Forex, the Garman-Klass model is the most efficient choice as it utilizes the full Open-High-Low-Close data set to account for opening gaps and professional trading ranges. The mathematical core of the script features a strict Horizon Adjustment based on the Square Root of Time rule. This aligns the one-bar volatility risk with your chosen momentum lookback period to ensure a mathematically consistent calculation. By default, the script uses Logarithmic Returns to maintain scale invariance, which is critical for assets with high percentage swings like Cryptocurrencies. To trade with VAM Pro, look for the histogram color and its relation to the Zero line. A Green histogram indicates positive volatility-adjusted momentum where bulls are dominant, while a Red histogram shows bearish dominance. Values reaching the +2.0 or -2.0 Sigma levels represent statistically extreme moves that often act as exhaustion points or precede strong mean-reversion opportunities. When the histogram crosses the yellow signal line, it provides an early warning that the current momentum is fading. Investment involves risk. The Volatility Adjusted Momentum (VAM) Pro+ is an analytical tool and does not constitute financial advice, investment recommendations, or an offer to buy or sell any security. Past performance is not indicative of future results. Market conditions can change rapidly, and technical indicators may produce false signals. Always perform your own due diligence, use proper risk management, and consult with a certified financial advisor before making any trading decisions. The author assumes no responsibility for any financial losses incurred through the use of this script.
Pine Script®指標
由fihrist提供
Commodity Channel Index CCI + EMA strategy ================================================================================ COMMODITY CHANNEL INDEX CCI + EMA STRATEGY - STRATEGY GUIDE 📊 ================================================================================ 💡 COLLABORATION & SUPPORT --------------------------- If you want to collaborate, have an idea for a strategy, or need help writing or customizing code, send an email to burdytrader@gmail.com or send me a message. Suggestions, ideas, and comments are always welcome! 🤝 I also develop automated trading codes for other trading platforms including: - CTrader (C#) - MetaTrader 4 (MQL4) - MetaTrader 5 (MQL5) If you need a strategy converted or developed for any of these platforms, feel free to contact me! ================================================================================ ⚠️ IMPORTANT: INSTRUMENT SELECTION 📈 ------------------------------------- This strategy performs BEST with currency pairs (forex). The CCI indicator works particularly well in the forex market due to the nature of currency movements and the effectiveness of the CCI in identifying overbought and oversold conditions in trending markets. Why Currency Pairs? 🎯 - CCI is highly effective in identifying reversals in forex markets - Currency pairs show clear overbought/oversold patterns - EMA filter (50/200) aligns well with major forex trends - High liquidity ensures reliable signal execution Performance Highlights: In specific currency pairs, when properly configured, this strategy can achieve: - Profit Factor: Over 2.0 - Win Rate: Up to 70% - Particularly effective pairs: USDCAD, EURUSD, GBPJPY While the strategy can work with other instruments (stocks, indices, commodities), currency pairs provide the most consistent and reliable results. For optimal performance, focus on major forex pairs with good liquidity and clear trending characteristics. ================================================================================ WHAT DOES THIS STRATEGY DO? 🎯 --------------------------- This strategy combines the Commodity Channel Index (CCI) with Exponential Moving Averages (EMA) to identify high-probability trading opportunities. The strategy uses CCI crossovers with a smoothing moving average and filters signals using EMA trend confirmation. The strategy automatically enters trades when CCI crosses the smoothing MA in specific zones, indicating potential trend reversals or continuations. HOW IT WORKS? ⚙️ --------------- 1. CCI CALCULATION 📈 The strategy calculates the Commodity Channel Index using: - CCI = (Price - SMA(Price, length)) / (0.015 × Deviation(Price, length)) - Default length: 20 periods - Source: HLC3 (typical price) The CCI shows: - Values above +100 = Overbought conditions - Values below -100 = Oversold conditions - Values around 0 = Neutral conditions 2. SMOOTHING MOVING AVERAGE 📊 A moving average is applied to the CCI to smooth out fluctuations: - Types available: SMA, EMA, SMMA (RMA), WMA, VWMA - Default: SMA with length 14 - Can be disabled (set to "None") This smoothed line acts as a reference for crossover signals. 3. EMA TREND FILTER 🎯 Two EMAs are calculated on the CCI: - EMA 50 (fast EMA) - EMA 200 (slow EMA) When the EMA filter is enabled: - LONG signals only occur when EMA50 > EMA200 (uptrend confirmation) - SHORT signals only occur when EMA50 < EMA200 (downtrend confirmation) This filter can be enabled/disabled via the "Use EMA Filter" option. 4. ENTRY CONDITIONS 🎲 LONG ENTRY (Buy Signal): - CCI crosses ABOVE the Smoothing MA (crossover) - CCI is between Lower Level (-100) and Middle Level (0) - EMA Filter: EMA50 > EMA200 (if filter enabled) - No existing positions (or close opposite positions first) SHORT ENTRY (Sell Signal): - CCI crosses BELOW the Smoothing MA (crossunder) - CCI is between Middle Level (0) and Upper Level (+100) - EMA Filter: EMA50 < EMA200 (if filter enabled) - No existing positions (or close opposite positions first) 5. POSITION MANAGEMENT 💰 The strategy uses a simple position management approach: - Only ONE position at a time (no pyramiding) - If a signal occurs in the opposite direction, closes existing position first - Then opens new position in the new direction - This prevents overexposure and simplifies risk management 6. TAKE PROFIT & STOP LOSS SETTINGS 🎯 The strategy uses percentage-based TP/SL: - Take Profit: 1.0% (default, configurable) - Stop Loss: 0.5% (default, configurable) - Risk/Reward Ratio: 2:1 (TP is double the SL) TP/SL are calculated once when the position opens and remain fixed. AVAILABLE PARAMETERS ⚙️ ----------------------- CCI SETTINGS: 1. CCI Length (Default: 20) - Period for CCI calculation - Lower values = More sensitive to recent price action - Higher values = More smoothed, less sensitive 2. CCI Source (Default: HLC3) - Price source for CCI calculation - Options: close, open, high, low, hlc3, hlcc4, ohlc4 3. CCI Lower Level (Default: -100) - Lower boundary for LONG entry zone - Typically -100 for oversold conditions 4. CCI Middle Level (Default: 0) - Neutral level separating LONG and SHORT zones 5. CCI Upper Level (Default: +100) - Upper boundary for SHORT entry zone - Typically +100 for overbought conditions SMOOTHING MA: 6. Type (Default: SMA) - Moving average type: None, SMA, EMA, SMMA (RMA), WMA, VWMA - Set to "None" to disable smoothing 7. Length (Default: 14) - Period for smoothing MA - Range: 7-28, step 7 EMA FILTER: 8. EMA 1 Length (Default: 50) - Fast EMA period applied to CCI 9. EMA 2 Length (Default: 200) - Slow EMA period applied to CCI 10. Use EMA Filter (Default: true) - Enable/disable EMA trend filter - When enabled: LONG only if EMA50 > EMA200, SHORT only if EMA50 < EMA200 RISK MANAGEMENT: 11. Take Profit (%) (Default: 1.0%) - Profit target as percentage of entry price - For LONG: Entry × (1 + TP%) - For SHORT: Entry × (1 - TP%) 12. Stop Loss (%) (Default: 0.5%) - Stop loss as percentage of entry price - For LONG: Entry × (1 - SL%) - For SHORT: Entry × (1 + SL%) VISUALIZATION 📊 --------------- The strategy displays in a separate panel below the price chart: 1. CCI LINE - Blue line showing the CCI value - Oscillates around zero 2. SMOOTHING MA LINE - Yellow line showing the smoothed CCI - Reference line for crossover signals 3. CCI LEVEL LINES - Red dashed line: Upper Level (+100) - Green dashed line: Lower Level (-100) - Yellow dashed line: Middle Level (0) 4. ENTRY SIGNALS - Green cross: LONG entry signal (when CCI crosses above MA) - Red cross: SHORT entry signal (when CCI crosses below MA) RECOMMENDED SETTINGS 🎯 ----------------------- To get started, you can use these settings: CCI SETTINGS: - CCI Length: 20 (default) - CCI Source: HLC3 (default) - CCI Lower Level: -100 (default) - CCI Middle Level: 0 (default) - CCI Upper Level: +100 (default) SMOOTHING MA: - Type: SMA (default) or EMA for faster response - Length: 14 (default) EMA FILTER: - EMA 1 Length: 50 (default) - EMA 2 Length: 200 (default) - Use EMA Filter: true (recommended for better signal quality) RISK MANAGEMENT: - Take Profit (%): 1.0% (adjust based on your risk/reward preference) - Stop Loss (%): 0.5% (adjust based on your risk tolerance) For more aggressive trading: - Reduce CCI Length to 14-16 - Reduce Smoothing MA Length to 7 - Disable EMA Filter For more conservative trading: - Increase CCI Length to 24-30 - Increase Smoothing MA Length to 21-28 - Keep EMA Filter enabled RECOMMENDED CURRENCY PAIRS 💱 ------------------------------ This strategy is optimized for currency pairs and performs exceptionally well on the following pairs when properly configured: TOP PERFORMING PAIRS: - USDCAD: Can achieve Profit Factor > 2.0 and Win Rate up to 70% - EURUSD: Excellent performance with consistent signals - GBPJPY: Strong results with proper EMA filter configuration These pairs have shown the best historical performance due to: - Clear trending characteristics - Good response to CCI overbought/oversold levels - Strong alignment with EMA 50/200 trend filter - High liquidity ensuring reliable execution When trading these pairs, use the default settings or slightly adjusted parameters based on the pair's volatility. Always backtest on historical data before using real money to find the optimal configuration for each specific pair. PRACTICAL EXAMPLE 📝 -------------------- Scenario: LONG Entry on EUR/USD 1. Market conditions: - Price: 1.1000 - CCI: -80 (in oversold zone) - Smoothing MA: -90 - CCI crosses above Smoothing MA (crossover occurs) - EMA50: -50, EMA200: -70 (EMA50 > EMA200, uptrend confirmed) 2. Strategy checks conditions: ✓ Smoothing MA enabled: Yes ✓ Crossover: Yes (CCI crosses above MA) ✓ CCI in range: Yes (-100 <= -80 <= 0) ✓ EMA Filter: Yes (EMA50 > EMA200) ✓ No existing position: Yes 3. Strategy opens position: - Direction: LONG (Buy) - Entry: 1.1000 (current close) - Take Profit: 1.1110 (1.0% above entry) - Stop Loss: 1.0945 (0.5% below entry) - Risk/Reward: 2:1 4. Outcome scenarios: - If price rises to 1.1110 → Take Profit hit (profit) - If price falls to 1.0945 → Stop Loss hit (loss limited) IMPORTANT NOTE ⚠️ ----------------- This strategy is a technical analysis tool based on CCI and EMA indicators. Like all trading strategies, it does NOT guarantee profits. Trading involves significant risks and you can lose money, including your entire investment. Past performance does not guarantee future results. Always: - Use appropriate risk management - Never risk more than you can afford to lose - Test the strategy on historical data (backtesting) before using real money - Start with small position sizes or paper trading - Understand that no strategy works 100% of the time - Consider market conditions, news events, and other factors - Keep a trading journal to learn and improve The author and contributors are NOT responsible for any losses incurred from using this strategy. Trading decisions are your own responsibility. Profits are NOT guaranteed, and losses are possible. LICENSE 📄 ---------- This code is open source and available for modification. You are free to use, modify, and distribute this strategy. If you republish or share a modified version, please kindly mention the original author. ================================================================================
Pine Script®策略
由Burdiga84提供
SCR Signals(개요) 스토캐스틱, CCI, RSI를 결합한 지표입니다. 편의상 SCR이라고 명명할게요 * 블로거 'SOXL연구원님의 SCR을 지표화했습니다. (지표설명) 1. 스토캐스틱은 %K길이, %K스무딩, %D스무딩이 각각 5,1,3 이 기본입니다. 어퍼밴드(과매수)는 80, 로우어밴드(과매도)는 20이며 설정해서 수정 가능합니다. 2. CCI는 길이 20이 기본입니다. 어퍼밴드(과매수)는 100, 로우어밴드(과매도)는 -100이며 역시 설정에서 변경가능합니다. 3. RSI 길이 14가 기본입니다. 어퍼밴드(과매수)는 70, 로우어밴드(과매도)는 30이며 역시 설정에서 변경가능합니다. (시그널) 세개 지표 중 1개지표가 동시에 과매수 해소되는 순간 S1, 2개지표가 동시에 과매수 해소되는 순간 S2, 3개지표 동시에 과매수 해소시 S3로 하고 캔들 위쪽에 표시 / 세개 지표 중 1개지표가 과매도 진입시 B1, 2개지표가 동시에 과매도 진입시 B2, 3개지표가 동시에 과매도 진입시 B3로 하고 캔들 아래쪽에 표시 Overview SCR is a combined signal system built from Stochastic, CCI, and RSI. For convenience, I call this indicator SCR. This script is an implementation/visualization of the SCR concept shared by the blogger “SOXL Researcher” (SOXL연구원). Indicator Settings Stochastic Default parameters: %K Length = 5, %K Smoothing = 1, %D Smoothing = 3 Default bands: Overbought (Upper) = 80, Oversold (Lower) = 20 All values can be changed in the settings. CCI Default length: 20 Default bands: Overbought (Upper) = 100, Oversold (Lower) = -100 All values can be changed in the settings. RSI Default length: 14 Default bands: Overbought (Upper) = 70, Oversold (Lower) = 30 All values can be changed in the settings. Signals (Plotted on the Main Price Chart) Signals are generated when the indicators trigger their conditions on the same bar (simultaneously). Overbought Resolution Signals (S) — plotted above candles S1: Exactly 1 of the three indicators resolves overbT (overbought resolution) on the same bar S2: Exactly 2 indicators resolve overbought on the same bar S3: All 3 indicators resolve overbought on the same bar Oversold Entry Signals (B) — plotted below candles B1: Exactly 1 of the three indicators enters oversold on the same bar B2: Exactly 2 indicators enter oversold on the same bar B3: All 3 indicators enter oversold on the same bar
Pine Script®指標
由lisnuby提供
RSI & MACD SuiteRSI & MACD Suite A professional combination of two essential momentum indicators - Relative Strength Index (RSI) and Moving Average Convergence Divergence (MACD) - designed to provide comprehensive market analysis in a single, clean interface. OVERVIEW This indicator combines the power of RSI and MACD to help traders identify potential overbought/oversold conditions, momentum shifts, and trend changes. Both indicators are displayed with enhanced visual elements including gradient fills, customizable bands, and clear signal lines. FEATURES RSI (Relative Strength Index) - Customizable Period: Adjustable RSI length (default: 14) - Visual Zones: Overbought zone (above 70) with green gradient, Oversold zone (below 30) with red gradient, Background fill between bands for easy reference - Key Levels: Clear horizontal lines at 30, 50, and 70 - Flexible Source: Choose any price source (close, open, high, low, etc.) MACD (Moving Average Convergence Divergence) - Customizable Parameters: Fast Length (default: 12), Slow Length (default: 26), Signal Length (default: 9) - MA Type Selection: Choose between EMA or SMA for both oscillator and signal line - Color-Coded Histogram: Green for bullish momentum, Red for bearish momentum - Clear Signal Lines: Blue MACD line and orange Signal line for easy identification ALERT CONDITIONS The indicator includes 7 built-in alert conditions: RSI Alerts: 1. RSI Overbought - Triggers when RSI crosses above 70 2. RSI Oversold - Triggers when RSI crosses below 30 3. RSI Midline Cross - Triggers when RSI crosses the 50 level MACD Alerts: 4. MACD Bullish Cross - Triggers when MACD line crosses above Signal line 5. MACD Bearish Cross - Triggers when MACD line crosses below Signal line 6. MACD Histogram Bullish - Triggers when histogram crosses above zero 7. MACD Histogram Bearish - Triggers when histogram crosses below zero CUSTOMIZATION Clean Organization - Inputs Tab: Separate groups for RSI and MACD settings - Style Tab: All visual elements clearly labeled with "RSI -" or "MACD -" prefixes for easy identification - Full Control: Customize colors, line widths, and visibility of all elements Visual Clarity - Professional color scheme optimized for both light and dark themes - Gradient fills for intuitive zone identification - Clear separation between RSI and MACD elements SETTINGS RSI Settings - Length: Lookback period for RSI calculation (default: 14) - Source: Price data to use for calculation (default: close) MACD Settings - Source: Price data to use for calculation (default: close) - Fast Length: Period for fast moving average (default: 12) - Slow Length: Period for slow moving average (default: 26) - Signal Length: Period for signal line (default: 9) - Oscillator MA Type: EMA or SMA for MACD calculation - Signal MA Type: EMA or SMA for signal line TECHNICAL DETAILS - Pine Script Version: v6 - Indicator Type: Oscillator (subplot) - Calculation Method: RSI uses Relative Strength Index with RMA smoothing, MACD uses Fast MA minus Slow MA with configurable MA types - Input Validation: Built-in checks to ensure valid parameter combinations NOTES - Default settings are industry-standard values (RSI: 14, MACD: 12/26/9) - All visual elements can be hidden/shown individually in the Style tab - Alerts must be manually created by users through TradingView's alert system - This indicator does not repaint - all signals are based on closed candles WHO SHOULD USE THIS - Day traders looking for momentum signals - Swing traders identifying trend changes - Technical analysts performing multi-indicator analysis - Traders who want a clean, all-in-one momentum solution DISCLAIMER This indicator is for educational and informational purposes only. It does not constitute financial advice. Always perform your own analysis and risk assessment before making trading decisions. Version: 1.0 Author: aaboomar License: Mozilla Public License 2.0
Pine Script®指標
由aaboomar提供
Ocean Master [JOAT]Ocean Master QE - Advanced Oceanic Market Analysis with Quantum Flow Dynamics Overview Ocean Master QE is an open-source overlay indicator that combines multiple analytical techniques into a unified market analysis framework. It uses ATR-based dynamic channels, volume-weighted order flow analysis, multi-timeframe correlation (quantum entanglement concept), and harmonic oscillator calculations to provide traders with a comprehensive view of market conditions. What This Indicator Does The indicator calculates and displays several key components: Dynamic Price Channels - ATR-adjusted upper, middle, and lower channels that adapt to current volatility conditions Order Flow Analysis - Separates buying and selling volume pressure to calculate a directional delta Smart Money Index - Volume-weighted order flow metric that highlights potential institutional activity Harmonic Oscillator - Weighted combination of 10 Fibonacci-period EMAs (5, 8, 13, 21, 34, 55, 89, 144, 233, 377) to identify trend direction Multi-Timeframe Correlation - Measures price correlation across 1H, 4H, and Daily timeframes Wave Function Analysis - Momentum-based state detection that identifies when price action becomes decisive How It Works The core channel calculation uses ATR with a configurable quantum sensitivity factor: float atr = ta.atr(i_atrLength) float quantumFactor = 1.0 + (i_quantumSensitivity * 0.1) float quantumATR = atr * quantumFactor upperChannel := ta.highest(high, i_length) - (quantumATR * 0.5) lowerChannel := ta.lowest(low, i_length) + (quantumATR * 0.5) midChannel := (upperChannel + lowerChannel) * 0.5 Order flow is calculated by separating volume into buy and sell components based on candle direction: The harmonic oscillator weights shorter EMAs more heavily using inverse weighting (1/1, 1/2, 1/3... 1/10), creating a responsive yet smooth trend indicator. Signal Generation Confluence signals require multiple conditions to align: Bullish: Harmonic oscillator crosses above zero + positive Smart Money Index + positive Order Flow Delta Bearish: Harmonic oscillator crosses below zero + negative Smart Money Index + negative Order Flow Delta Dashboard Panel (Top-Right) Bias - Current market direction based on price vs mid-channel Entanglement - Multi-timeframe correlation score (0-100%) Wave State - COLLAPSED (decisive) or SUPERPOSITION (uncertain) Volume - Current volume relative to 20-period average Volatility - ATR as percentage of price Smart Money - Volume-weighted order flow reading Visual Elements Ocean Depth Layers - Gradient fills between channel levels representing different price zones Channel Lines - Upper (surface), middle, and lower (seabed) dynamic levels Divergence Markers - Triangle shapes when harmonic oscillator crosses zero Confluence Labels - BULL/BEAR labels when multiple factors align Suggested Use Cases Identify trend direction using the harmonic oscillator and channel position Monitor order flow for potential institutional activity Use multi-timeframe correlation to confirm trade direction across timeframes Watch for confluence signals where multiple factors align Input Parameters Length (default: 14) - Base period for channel and indicator calculations ATR Length (default: 14) - Period for ATR calculation Quantum Depth (default: 3) - Complexity factor for calculations Quantum Sensitivity (default: 1.5) - Channel width multiplier Timeframe Recommendations Works on all timeframes. Higher timeframes (4H, Daily) provide smoother signals; lower timeframes require faster reaction times and may produce more noise. Limitations Multi-timeframe requests add processing overhead Order flow estimation is based on candle direction, not actual order book data Correlation calculations require sufficient historical data Open-Source and Disclaimer This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management and conduct your own analysis before trading. - Made with passion by officialjackofalltrades
Pine Script®指標
由officialjackofalltrades提供
Next Candle PredictorAdvanced TradingView Indicator for Precise Buy and Sell Signals Overview: The Predicta Futures - Next Candle Predictor is a cutting-edge TradingView indicator designed to forecast the next candle's direction in futures and cryptocurrency markets. Leveraging a multi-indicator confluence strategy, this tool provides traders with actionable long and short prediction percentages, enhanced by dynamic ADX-based thresholds and visual projection candles. Ideal for scalping, day trading, or swing trading on platforms like MEXC or Binance futures, it combines Supertrend, MACD, RSI, Stochastic, ADX, and volume analysis to deliver high-probability buy and sell signals while minimizing false positives. Key Features: • Multi-Indicator Confluence Scoring: Integrates Supertrend for trend direction, EMAs (8, 21, 50) for alignment, MACD for momentum crossovers, RSI for overbought/oversold conditions, Stochastic for divergence detection, ADX for trend strength, and volume ratios for confirmation. A customizable confluence score (0-6) ensures signals meet user-defined criteria, reducing whipsaws in volatile markets. • Dynamic Prediction Thresholds: ADX-driven adjustments lower the required prediction percentage (e.g., 60% in strong trends) for "PERFECT TIME" entries, adapting to market conditions like ranging or trending phases. • Visual Analysis Table: A sleek, color-coded dashboard displays progress bars for each indicator, prediction percentages, and status (e.g., "PERFECT TIME" or "WAIT"). Supports long and short analyses with intuitive ASCII bars for quick scans. • Projection Candles: Simulates potential next-candle outcomes with volatility-scaled (via Bollinger Bands width) green long and red short candles, aiding in visualizing price targets. • Buy/Sell Signals and Alerts: Generates labeled "BUY" and "SELL" arrows on EMA crossovers within confirmed trends, with separate alerts for basic signals and high-confluence "PERFECT TIME" opportunities. • Customizable Inputs: Adjust ATR periods, Supertrend factors, minimum confluence scores, and volume ratios to tailor the indicator for stocks, forex, or crypto perpetual futures. How It Works: This TradingView script calculates long and short scores using weighted contributions from key indicators, normalizing them into prediction percentages. A confluence check—factoring trend, EMA alignment, MACD, Stochastic, volume, and ADX—triggers "PERFECT TIME" only when conditions align robustly. For example: • In a downtrend (Supertrend red), with bearish MACD and Stochastic, and sufficient volume, the indicator highlights short opportunities. • Dynamic thresholds ensure aggressive entries in strong trends (ADX >25) and conservative ones in weak trends. • Backtested for reliability, it excels in identifying reversals and continuations, making it a must-have for traders seeking an edge in futures trading strategies. Usage Instructions: 1. Add the indicator to your TradingView chart. (Search: Next Candle Predictor) 2. Customize settings via the inputs panel (e.g., set minConfluence to 5 for stricter signals). 3. Monitor the analysis table for predictions and confluence scores. 4. Act on "BUY/SELL" labels or "PERFECT TIME" alerts, combining with your risk management. 5. Enable projection candles for visual forecasting of the next bar. Compatible with all timeframes, from 1-minute scalping to daily swings. Note: This is not financial advice; always verify signals with additional analysis. Join thousands of traders enhancing their strategies—add it to your charts today and elevate your trading performance! Please rate and review if it boosts your trades! Thank you!
Pine Script®指標
由PredictaFutures提供
37
Next Candle PredictorAdvanced TradingView Indicator for Precise Buy and Sell Signals Overview: The Predicta Futures - Next Candle Predictor is a cutting-edge TradingView indicator designed to forecast the next candle's direction in futures and cryptocurrency markets. Leveraging a multi-indicator confluence strategy, this tool provides traders with actionable long and short prediction percentages, enhanced by dynamic ADX-based thresholds and visual projection candles. Ideal for scalping, day trading, or swing trading on platforms like MEXC or Binance futures, it combines Supertrend, MACD, RSI, Stochastic, ADX, and volume analysis to deliver high-probability buy and sell signals while minimizing false positives. Key Features: * Multi-Indicator Confluence Scoring: Integrates Supertrend for trend direction, EMAs (8, 21, 50) for alignment, MACD for momentum crossovers, RSI for overbought/oversold conditions, Stochastic for divergence detection, ADX for trend strength, and volume ratios for confirmation. A customizable confluence score (0-6) ensures signals meet user-defined criteria, reducing whipsaws in volatile markets. * Dynamic Prediction Thresholds: ADX-driven adjustments lower the required prediction percentage (e.g., 60% in strong trends) for "PERFECT TIME" entries, adapting to market conditions like ranging or trending phases. * Visual Analysis Table: A sleek, color-coded dashboard displays progress bars for each indicator, prediction percentages, and status (e.g., "PERFECT TIME" or "WAIT"). Supports long and short analyses with intuitive ASCII bars for quick scans. * Projection Candles: Simulates potential next-candle outcomes with volatility-scaled (via Bollinger Bands width) green long and red short candles, aiding in visualizing price targets. Buy/Sell Signals and Alerts: Generates labeled "BUY" and "SELL" arrows on EMA crossovers within confirmed trends, with separate alerts for basic signals and high-confluence "PERFECT TIME" opportunities. * Customizable Inputs: Adjust ATR periods, Supertrend factors, minimum confluence scores, and volume ratios to tailor the indicator for stocks, forex, or crypto perpetual futures. How It Works: This TradingView script calculates long and short scores using weighted contributions from key indicators, normalizing them into prediction percentages. A confluence check—factoring trend, EMA alignment, MACD, Stochastic, volume, and ADX—triggers "PERFECT TIME" only when conditions align robustly. For example: In a downtrend (Supertrend red), with bearish MACD and Stochastic, and sufficient volume, the indicator highlights short opportunities. Dynamic thresholds ensure aggressive entries in strong trends (ADX >25) and conservative ones in weak trends. Backtested for reliability, it excels in identifying reversals and continuations, making it a must-have for traders seeking an edge in futures trading strategies. Usage Instructions: 1. Add the indicator to your TradingView chart. 2. Customize settings via the inputs panel (e.g., set minConfluence to 5 for stricter signals). 3. Monitor the analysis table for predictions and confluence scores. 4. Act on "BUY/SELL" labels or "PERFECT TIME" alerts, combining with your risk management. 5. Enable projection candles for visual forecasting of the next bar. Compatible with all timeframes, from 1-minute scalping to daily swings. Note: This is not financial advice; always verify signals with additional analysis. Rate and review if it boosts your trades! Thank you!
Pine Script®指標
由PredictaFutures提供
Ultimate MACD [captainua]Ultimate MACD - Comprehensive MACD Trading System Overview This indicator combines traditional MACD calculations with advanced features including divergence detection, volume analysis, histogram analysis tools, regression forecasting, strong top/bottom detection, and multi-timeframe confirmation to provide a comprehensive MACD-based trading system. The script calculates MACD using configurable moving average types (EMA, SMA, RMA, WMA) and applies various smoothing methods to reduce noise while maintaining responsiveness. The combination of these features creates a multi-layered confirmation system that reduces false signals by requiring alignment across multiple indicators and timeframes. Core Calculations MACD Calculation: The script calculates MACD using the standard formula: MACD Line = Fast MA - Slow MA, Signal Line = Moving Average of MACD Line, Histogram = MACD Line - Signal Line. The default parameters are Fast=12, Slow=26, Signal=9, matching the traditional MACD settings. The script supports four moving average types: - EMA (Exponential Moving Average): Standard and most responsive, default choice - SMA (Simple Moving Average): Equal weight to all periods - RMA (Wilder's Moving Average): Smoother, less responsive - WMA (Weighted Moving Average): Recent prices weighted more heavily The price source can be configured as Close (standard), Open, High, Low, HL2, HLC3, or OHLC4. Alternative sources provide different sensitivity characteristics for various trading strategies. Configuration Presets: The script includes trading style presets that automatically configure MACD parameters: - Scalping: Fast/Responsive settings (8,18,6 with minimal smoothing) - Day Trading: Balanced settings (10,22,7 with minimal smoothing) - Swing Trading: Standard settings (12,26,9 with moderate smoothing) - Position Trading: Smooth/Conservative settings (15,35,12 with higher smoothing) - Custom: Full manual control over all parameters Histogram Smoothing: The histogram can be smoothed using EMA to reduce noise and filter minor fluctuations. Smoothing length of 1 = raw histogram (no smoothing), higher values (3-5) = smoother histogram. Increased smoothing reduces noise but may delay signals slightly. Percentage Mode: MACD values can be converted to percentage of price (MACD/Close*100) for cross-instrument comparison. This is useful when comparing MACD signals across instruments with different price levels (e.g., BTC vs ETH). The percentage mode normalizes MACD values, making them comparable regardless of instrument price. MACD Scale Factor: A scale factor multiplier (default 1.0) allows adjusting MACD display size for better visibility. Use 0.3-0.5 if MACD appears too compressed, or 2.0-3.0 if too small. Dynamic Overbought/Oversold Levels: Overbought and oversold levels are calculated dynamically based on MACD's mean and standard deviation over a lookback period. The formula: OB = MACD Mean + (StdDev × OB Multiplier), OS = MACD Mean - (StdDev × OS Multiplier). This adapts to current market conditions, widening in volatile markets and narrowing in calm markets. The lookback period (default 20) controls how quickly the levels adapt: longer periods (30-50) = more stable levels, shorter (10-15) = more responsive. OB/OS Background Coloring: Optional background coloring can highlight the entire panel when MACD enters overbought or oversold territory, providing prominent visual indication of extreme conditions. The background colors are drawn on top of the main background to ensure visibility. Divergence Detection Regular Divergence: The script uses the MACD line (not histogram) for divergence detection, which provides more reliable signals. Bullish divergence: Price makes a lower low while MACD line makes a higher low. Bearish divergence: Price makes a higher high while MACD line makes a lower high. Divergences often precede reversals and are powerful reversal signals. Pivot-Based Divergence: The divergence detection uses actual pivot points (pivotlow/pivothigh) instead of simple lowest/highest comparisons. This provides more accurate divergence detection by identifying significant pivot lows/highs in both price and MACD line. The pivot-based method compares two recent pivot points: for bullish divergence, price makes a lower low while MACD makes a higher low at the pivot points. This method reduces false divergences by requiring actual pivot points rather than just any low/high within a period. The pivot lookback parameters (left and right) control how many bars on each side of a pivot are required for confirmation. Higher values = more conservative pivot detection. Hidden Divergence: Continuation patterns that signal trend continuation rather than reversal. Bullish hidden divergence: Price makes a higher low but MACD makes a lower low. Bearish hidden divergence: Price makes a lower high but MACD makes a higher high. These patterns indicate the trend is likely to continue in the current direction. Zero-Line Filter: The "Don't Touch Zero Line" option ensures divergences occur in proper context: for bullish divergence, MACD must stay below zero; for bearish divergence, MACD must stay above zero. This filters out divergences that occur in neutral zones. Range Filtering: Minimum and maximum lookback ranges control the time window between pivots to consider for divergence. This helps filter out divergences that are too close together (noise) or too far apart (less relevant). Volume Confirmation System Volume threshold filtering requires current volume to exceed the volume SMA multiplied by the threshold factor. The formula: Volume Confirmed = Volume > (Volume SMA × Threshold). If the threshold is set to 1.0 or lower, volume confirmation is effectively disabled (always returns true). This allows you to use the indicator without volume filtering if desired. Volume confirmation significantly increases divergence and signal reliability. Volume Climax and Dry-Up Detection: The script can mark bars with extremely high volume (volume climax) or extremely low volume (volume dry-up). Volume climax indicates potential reversal points or strong momentum continuation. Volume dry-up indicates low participation and may produce unreliable signals. These markers use standard deviation multipliers to identify extreme volume conditions. Zero-Line Cross Detection MACD zero-line crosses indicate momentum shifts: above zero = bullish momentum, below zero = bearish momentum. The script includes alert conditions for zero-line crosses with cooldown protection to prevent alert spam. Zero-line crosses can provide early warning signals before MACD crosses the signal line. Histogram Analysis Tools Histogram Moving Average: A moving average applied to the histogram itself helps identify histogram trend direction and acts as a signal line for histogram movements. Supports EMA, SMA, RMA, and WMA types. Useful for identifying when histogram momentum is strengthening or weakening. Histogram Bollinger Bands: Bollinger Bands are applied to the MACD histogram instead of price. The calculation: Basis = SMA(Histogram, Period), StdDev = stdev(Histogram, Period), Upper = Basis + (StdDev × Deviation Multiplier), Lower = Basis - (StdDev × Deviation Multiplier). This creates dynamic zones around the histogram that adapt to histogram volatility. When the histogram touches or exceeds the bands, it indicates extreme conditions relative to recent histogram behavior. Stochastic MACD (StochMACD): Stochastic MACD applies the Stochastic oscillator formula to the MACD histogram instead of price. This normalizes the histogram to a 0-100 scale, making it easier to identify overbought/oversold conditions on the histogram itself. The calculation: %K = ((Histogram - Lowest Histogram) / (Highest Histogram - Lowest Histogram)) × 100. %K is smoothed, and %D is calculated as the moving average of smoothed %K. Standard thresholds are 80 (overbought) and 20 (oversold). Regression Forecasting The script includes advanced regression forecasting that predicts future MACD values using mathematical models. This helps anticipate potential MACD movements and provides forward-looking context for trading decisions. Regression Types: - Linear: Simple trend line (y = mx + b) - fastest, works well for steady trends - Polynomial: Quadratic curve (y = ax² + bx + c) - captures curvature in MACD movement - Exponential Smoothing: Weighted average with more weight on recent values - responsive to recent changes - Moving Average: Uses difference between short and long MA to estimate trend - stable and smooth Forecast Horizon: Number of bars to forecast ahead (default 5, max 50 for linear/MA, max 20 for polynomial due to performance). Longer horizons predict further ahead but may be less accurate. Confidence Bands: Optional upper/lower bands around forecast show prediction uncertainty based on forecast error (standard deviation of prediction vs actual). Wider bands = higher uncertainty. The confidence level multiplier (default 1.5) controls band width. Forecast Display: Forecast appears as dotted lines extending forward from current bar, with optional confidence bands. All forecast values respect percentage mode and scale factor settings. Strong Top/Bottom Signals The script detects strong recovery from extreme MACD levels, generating "sBottom" and "sTop" signals. These identify significant reversal potential when MACD recovers substantially from overbought/oversold extremes. Strong Bottom (sBottom): Triggered when: 1. MACD was at or near its lowest point in the bottom period (default 10 bars) 2. MACD was in or near the oversold zone 3. MACD has recovered by at least the threshold amount (default 0.5) from the lowest point 4. Recovery persists for confirmation bars (default 2 consecutive bars) 5. MACD has moved out of the oversold zone 6. Volume is above average 7. All enabled filters pass 8. Minimum bars have passed since last signal (reset period, default 5 bars) Strong Top (sTop): Triggered when: 1. MACD was at or near its highest point in the top period (default 7 bars) 2. MACD was in or near the overbought zone 3. MACD has declined by at least the threshold amount (default 0.5) from the highest point 4. Decline persists for confirmation bars (default 2 consecutive bars) 5. MACD has moved out of the overbought zone 6. Volume is above average 7. All enabled filters pass 8. Minimum bars have passed since last signal (reset period, default 5 bars) Label Placement: sTop/sBottom labels appear on the historical bar where the actual extreme occurred (not on current bar), showing the exact MACD value at that extreme. Labels respect the unified distance checking system to prevent overlaps with Buy/Sell Strength labels. Signal Strength Calculation The script calculates a composite signal strength score (0-100) based on multiple factors: - MACD distance from signal line (0-50 points): Larger separation indicates stronger signal - Volume confirmation (0-15 points): Volume above average adds points - Secondary timeframe alignment (0-15 points): Higher timeframe agreement adds points - Distance from zero line (0-20 points): Closer to zero can indicate stronger reversal potential Higher scores (70+) indicate stronger, more reliable signals. The signal strength is displayed in the statistics table and can be used as a filter to only accept signals above a threshold. Smart Label Placement System The script includes an advanced label placement system that tracks MACD extremes and places Buy/Sell Strength labels at optimal locations: Label Placement Algorithm: - Labels appear on the current bar at confirmation (not on historical extreme bars), ensuring they're visible when the signal is confirmed - The system tracks pending signals when MACD enters OB/OS zones or crosses the signal line - During tracking, the system continuously searches for the true extreme (lowest MACD for buys, highest MACD for sells) within a configurable historical lookback period - Labels are only finalized when: (1) MACD exits the OB/OS zone, (2) sufficient bars have passed (2x minimum distance), (3) MACD has recovered/declined by a configurable percentage from the extreme (default 15%), and (4) tracking has stopped (no better extreme found) Label Spacing and Overlap Prevention: - Minimum Bars Between Labels: Base distance requirement (default 5 bars) - Label Spacing Multiplier: Scales the base distance (default 1.5x) for better distribution. Higher values = more spacing between labels - Effective distance = Base Distance × Spacing Multiplier (e.g., 5 × 1.5 = 7.5 bars minimum) - Unified distance checking prevents overlaps between all label types (Buy Strength, Sell Strength, sTop, sBottom) Strength-Based Filtering: - Label Strength Minimum (%): Only labels with strength at or above this threshold are displayed (default 75%) - When multiple potential labels are close together, the system automatically compares strengths and keeps only the strongest one - This ensures only the most significant signals are displayed, reducing chart clutter Zero Line Polarity Enforcement: - Enforce Zero Line Polarity (default enabled): Ensures labels follow traditional MACD interpretation - Buy Strength labels only appear when the tracked extreme MACD value was below zero (negative territory) - Sell Strength labels only appear when the tracked extreme MACD value was above zero (positive territory) - This prevents counter-intuitive labels (e.g., Buy labels above zero line) and aligns with standard MACD trading principles Recovery/Decline Confirmation: - Recovery/Decline Confirm (%): Percent move away from the extreme required before finalizing (default 15%) - For Buy labels: MACD must recover by at least this percentage from the tracked bottom - For Sell labels: MACD must decline by at least this percentage from the tracked top - Higher values = more confirmation required, fewer but more reliable labels Historical Lookback: - Historical Lookback for Label Placement: Number of bars to search for true extremes (default 20) - The system searches within this period to find the actual lowest/highest MACD value - Higher values analyze more history but may be slower; lower values are faster but may miss some extremes Cross Quality Score The script calculates a MACD cross quality score (0-100) that rates crossover quality based on: - Cross angle (0-50 points): Steeper crosses = stronger signals - Volume confirmation (0-25 points): Volume above average adds points - Distance from zero line (0-25 points): Crosses near zero line are stronger This score helps identify high-quality crossovers and can be used as a filter to only accept signals meeting minimum quality threshold. Filtering System Histogram Filter: Requires histogram to be above zero for buy signals, below zero for sell signals. Ensures momentum alignment before generating signals. Signal Strength Filter: Requires minimum signal strength score for signals. Higher threshold = only strongest signals pass. This combines multiple confirmation factors into a single filter. Cross Quality Filter: Requires minimum cross quality score for signals. Rates crossover quality based on angle, volume, momentum, and distance from zero. Only signals meeting minimum quality threshold will be generated. All filters use the pattern: filterResult = not filterEnabled OR conditionMet. This means if a filter is disabled, it always passes (returns true). Filters can be combined, and all must pass for a signal to fire. Multi-Timeframe Analysis The script can display MACD from a secondary (higher) timeframe and use it for confirmation. When secondary timeframe confirmation is enabled, signals require the higher timeframe MACD to align (bullish/bearish) with the signal direction. This ensures signals align with the larger trend context, reducing counter-trend trades. Secondary Timeframe MACD: The secondary timeframe MACD uses the same calculation parameters (fast, slow, signal, MA type) as the main MACD but from a higher timeframe. This provides context for the current timeframe's MACD position relative to the larger trend. The secondary MACD lines are displayed on the chart when enabled. Noise Filtering Noise filtering hides small histogram movements below a threshold. This helps focus on significant moves and reduces chart clutter. When enabled, only histogram movements above the threshold are displayed. Typical threshold values are 0.1-0.5 for most instruments, depending on the instrument's price range and volatility. Signal Debounce Signal debounce prevents duplicate MACD cross signals within a short time period. Useful when MACD crosses back and forth quickly, creating multiple signals. Debounce ensures only one signal per period, reducing signal spam during choppy markets. This is separate from alert cooldown, which applies to all alert types. Background Color Modes The script offers three background color modes: - Dynamic: Full MACD heatmap based on OB/OS conditions, confidence, and momentum. Provides rich visual feedback. - Monotone: Soft neutral background but still allows overlays (OB/OS zones). Keeps the chart clean without overpowering candles. - Off: No MACD background (only overlays and plots). Maximum chart cleanliness. When OB/OS background colors are enabled, they are drawn on top of the main background to ensure visibility. Statistics Table A real-time statistics table displays current MACD values, signal strength, distance from zero line, secondary timeframe alignment, volume confirmation status, and all active filter statuses. The table dynamically adjusts to show only enabled features, keeping it clean and relevant. The table position can be configured (Top Left, Top Right, Bottom Left, Bottom Right). Performance Statistics Table An optional performance statistics table shows comprehensive filter diagnostics: - Total buy/sell signals (raw crossover count before filters) - Filtered buy/sell signals (signals that passed all filters) - Overall pass rates (percentage of signals that passed filters) - Rejected signals count - Filter-by-filter rejection diagnostics showing which filters rejected how many signals This table helps optimize filter settings by showing which filters are most restrictive and how they impact signal frequency. The diagnostics format shows rejections as "X B / Y S" (X buy signals rejected, Y sell signals rejected) or "Disabled" if the filter is not active. Alert System The script includes separate alert conditions for each signal type: - MACD Cross: MACD line crosses above/below Signal line (with or without secondary confirmation) - Zero-Line Cross: MACD crosses above/below zero - Divergence: Regular and hidden divergence detections - Secondary Timeframe: Higher timeframe MACD crosses - Histogram MA Cross: Histogram crosses above/below its moving average - Histogram Zero Cross: Histogram crosses above/below zero - StochMACD: StochMACD overbought/oversold entries and %K/%D crosses - Histogram BB: Histogram touches/breaks Bollinger Bands - Volume Events: Volume climax and dry-up detections - OB/OS: MACD entry/exit from overbought/oversold zones - Strong Top/Bottom: sTop and sBottom signal detections Each alert type has its own cooldown system to prevent alert spam. The cooldown requires a minimum number of bars between alerts of the same type, reducing duplicate alerts during volatile periods. Alert types can be filtered to only evaluate specific alert types (All, MACD Cross, Zero Line, Divergence, Secondary Timeframe, Histogram MA, Histogram Zero, StochMACD, Histogram BB, Volume Events, OB/OS, Strong Top/Bottom). How Components Work Together MACD crossovers provide the primary signal when the MACD line crosses the Signal line. Zero-line crosses indicate momentum shifts and can provide early warning signals. Divergences identify potential reversals before they occur. Volume confirmation ensures signals occur with sufficient market participation, filtering out low-volume false breakouts. Histogram analysis tools (MA, Bollinger Bands, StochMACD) provide additional context for signal reliability and identify significant histogram zones. Signal strength combines multiple confirmation factors into a single score, making it easy to filter for only the strongest signals. Cross quality score rates crossover quality to identify high-quality setups. Multi-timeframe confirmation ensures signals align with higher timeframe trends, reducing counter-trend trades. Usage Instructions Getting Started: The default configuration shows MACD(12,26,9) with standard EMA calculations. Start with default settings and observe behavior, then customize settings to match your trading style. You can use configuration presets for quick setup based on your trading style. Customizing MACD Parameters: Adjust Fast Length (default 12), Slow Length (default 26), and Signal Length (default 9) based on your trading timeframe. Shorter periods (8,17,7) for faster signals, longer (15,30,12) for smoother signals. You can change the moving average type: EMA for responsiveness, RMA for smoothness, WMA for recent price emphasis. Price Source Selection: Choose Close (standard), or alternative sources (HL2, HLC3, OHLC4) for different sensitivity. HL2 uses the midpoint of the high-low range, HLC3 and OHLC4 incorporate more price information. Histogram Smoothing: Set smoothing to 1 for raw histogram (no smoothing), or increase (3-5) for smoother histogram that reduces noise. Higher smoothing reduces false signals but may delay signals slightly. Percentage Mode: Enable percentage mode when comparing MACD across instruments with different price levels. This normalizes MACD values, making them directly comparable. Dynamic OB/OS Levels: The dynamic thresholds automatically adapt to volatility. Adjust the multipliers (default 1.5) to fine-tune sensitivity: higher values (2.0-3.0) = more extreme thresholds (fewer signals), lower (1.0-1.5) = more frequent signals. Adjust the lookback period to control how quickly levels adapt. Enable OB/OS background colors for visual indication of extreme conditions. Volume Confirmation: Set volume threshold to 1.0 (default, effectively disabled) or higher (1.2-1.5) for standard confirmation. Higher values require more volume for confirmation. Set to 0.1 to completely disable volume filtering. Filters: Enable filters gradually to find your preferred balance. Start with histogram filter for basic momentum alignment, then add signal strength filter (threshold 50+) for moderate signals, then cross quality filter (threshold 50+) for high-quality crossovers. Combine filters for highest-quality signals but expect fewer signals. Divergence: Enable divergence detection and adjust pivot lookback parameters. Pivot-based divergence provides more accurate detection using actual pivot points. Hidden divergence is useful for trend-following strategies. Adjust range parameters to filter divergences by time window. Zero-Line Crosses: Zero-line cross alerts are automatically available when alerts are enabled. These provide early warning signals for momentum shifts. Histogram Analysis Tools: Enable Histogram Moving Average to see histogram trend direction. Enable Histogram Bollinger Bands to identify extreme histogram zones. Enable Stochastic MACD to normalize histogram to 0-100 scale for overbought/oversold identification. Multi-Timeframe: Enable secondary timeframe MACD to see higher timeframe context. Enable secondary confirmation to require higher timeframe alignment for signals. Signal Strength: Signal strength is automatically calculated and displayed in the statistics table. Use signal strength filter to only accept signals above a threshold (e.g., 50 for moderate, 70+ for strong signals only). Smart Label Placement: Configure label placement settings to control label appearance and quality: - Label Strength Minimum (%): Set threshold (default 75%) to show only strong signals. Higher = fewer, stronger labels - Label Spacing Multiplier: Adjust spacing (default 1.5x) for better distribution. Higher = more spacing between labels - Recovery/Decline Confirm (%): Set confirmation requirement (default 15%). Higher = more confirmation, fewer labels - Enforce Zero Line Polarity: Enable (default) to ensure Buy labels only appear when tracked extreme was below zero, Sell labels only when above zero - Historical Lookback: Adjust search period (default 20 bars) for finding true extremes. Higher = more history analyzed Cross Quality: Cross quality score is automatically calculated for crossovers. Use cross quality filter to only accept high-quality crossovers (threshold 50+ for moderate, 70+ for high quality). Alerts: Set up alerts for your preferred signal types. Enable alert cooldown (default enabled, 5 bars) to prevent alert spam. Use alert type filter to only evaluate specific alert types (All, MACD Cross, Zero Line, Divergence, Secondary Timeframe, Histogram MA, Histogram Zero, StochMACD, Histogram BB, Volume Events, OB/OS, Strong Top/Bottom). Each signal type has its own alert condition, so you can be selective about which signals trigger alerts. Visual Elements and Signal Markers The script uses various visual markers to indicate signals and conditions: - MACD Line: Green when above signal (bullish), red when below (bearish) if dynamic colors enabled. Optional black outline for enhanced visibility - Signal Line: Orange line with optional black outline for enhanced visibility - Histogram: Color-coded based on direction and momentum (green for bullish rising, lime for bullish falling, red for bearish falling, orange for bearish rising) - Zero Line: Horizontal reference line at MACD = 0 - Fill to Zero: Green/red semi-transparent fill between MACD line and zero line showing bullish/bearish territory - Fill Between OB/OS: Blue semi-transparent fill between overbought/oversold thresholds highlighting neutral zone - OB/OS Background Colors: Background coloring when MACD enters overbought/oversold zones - Background Colors: Dynamic or monotone backgrounds indicating MACD state, or custom chart background - Divergence Labels: "🐂" for bullish, "🐻" for bearish, "H Bull" for hidden bullish, "H Bear" for hidden bearish - Divergence Lines: Colored lines connecting pivot points when divergences are detected - Volume Climax Markers: ⚡ symbol for extremely high volume - Volume Dry-Up Markers: 💧 symbol for extremely low volume - Buy/Sell Strength Labels: Show signal strength percentage (e.g., "Buy Strength: 75%") - Strong Top/Bottom Labels: "sTop" and "sBottom" for extreme level recoveries - Secondary MACD Lines: Purple lines showing higher timeframe MACD - Histogram MA: Orange line showing histogram moving average - Histogram BB: Blue bands around histogram showing extreme zones - StochMACD Lines: %K and %D lines with overbought/oversold thresholds - Regression Forecast: Dotted blue lines extending forward with optional confidence bands Signal Priority and Interpretation Signals are generated independently and can occur simultaneously. Higher-priority signals generally indicate stronger setups: 1. MACD Cross with Multiple Filters - Highest priority: Requires MACD crossover plus all enabled filters (histogram, signal strength, cross quality) and secondary timeframe confirmation if enabled. These are the most reliable signals. 2. Zero-Line Cross - High priority: Indicates momentum shift. Can provide early warning signals before MACD crosses the signal line. 3. Divergence Signals - Medium-High priority: Pivot-based divergence is more reliable than simple divergence. Hidden divergence indicates continuation rather than reversal. 4. MACD Cross with Basic Filters - Medium priority: MACD crosses signal line with basic histogram filter. Less reliable alone but useful when combined with other confirmations. Best practice: Wait for multiple confirmations. For example, a MACD crossover combined with divergence, volume confirmation, and secondary timeframe alignment provides the strongest setup. Chart Requirements For proper script functionality and compliance with TradingView requirements, ensure your chart displays: - Symbol name: The trading pair or instrument name should be visible - Timeframe: The chart timeframe should be clearly displayed - Script name: "Ultimate MACD " should be visible in the indicator title These elements help traders understand what they're viewing and ensure proper script identification. The script automatically includes this information in the indicator title and chart labels. Performance Considerations The script is optimized for performance: - Calculations use efficient Pine Script functions (ta.ema, ta.sma, etc.) which are optimized by TradingView - Conditional execution: Features only calculate when enabled - Label management: Old labels are automatically deleted to prevent accumulation - Array management: Divergence label arrays are limited to prevent memory accumulation The script should perform well on all timeframes. On very long historical data with many enabled features, performance may be slightly slower, but it remains usable. Known Limitations and Considerations - Dynamic OB/OS levels can vary significantly based on recent MACD volatility. In very volatile markets, levels may be wider; in calm markets, they may be narrower. - Volume confirmation requires sufficient historical volume data. On new instruments or very short timeframes, volume calculations may be less reliable. - Higher timeframe MACD uses request.security() which may have slight delays on some data feeds. - Stochastic MACD requires the histogram to have sufficient history. Very short periods on new charts may produce less reliable StochMACD values initially. - Divergence detection requires sufficient historical data to identify pivot points. Very short lookback periods may produce false positives. Practical Use Cases The indicator can be configured for different trading styles and timeframes: Swing Trading: Use MACD(12,26,9) with secondary timeframe confirmation. Enable divergence detection. Use signal strength filter (threshold 50+) and cross quality filter (threshold 50+) for higher-quality signals. Enable histogram analysis tools for additional context. Day Trading: Use MACD(8,17,7) or use "Day Trading" preset with minimal histogram smoothing for faster signals. Enable zero-line cross alerts for early signals. Use volume confirmation with threshold 1.2-1.5. Enable histogram MA for momentum tracking. Trend Following: Use MACD(12,26,9) or longer periods (15,30,12) for smoother signals. Enable secondary timeframe confirmation for trend alignment. Hidden divergence signals are useful for trend continuation entries. Use cross quality filter to identify high-quality crossovers. Reversal Trading: Focus on divergence detection (pivot-based for accuracy) combined with zero-line crosses. Enable volume confirmation. Use histogram Bollinger Bands to identify extreme histogram zones. Enable StochMACD for overbought/oversold identification. Multi-Timeframe Analysis: Enable secondary timeframe MACD to see context from larger timeframes. For example, use daily MACD on hourly charts to understand the larger trend context. Enable secondary confirmation to require higher timeframe alignment for signals. Practical Tips and Best Practices Getting Started: Start with default settings and observe MACD behavior. The default configuration (MACD 12,26,9 with EMA) is balanced and works well across different markets. After observing behavior, customize settings to match your trading style. Consider using configuration presets for quick setup. Reducing Repainting: All signals are based on confirmed bars, minimizing repainting. The script uses confirmed bar data for all calculations to ensure backtesting accuracy. Signal Quality: MACD crosses with multiple filters provide the highest-quality signals because they require alignment across multiple indicators. These signals have lower frequency but higher reliability. Use signal strength scores to identify the strongest signals (70+). Use cross quality scores to identify high-quality crossovers (70+). Filter Combinations: Start with histogram filter for basic momentum alignment, then add signal strength filter for moderate signals, then cross quality filter for high-quality crossovers. Combining all filters significantly reduces false signals but also reduces signal frequency. Find your balance based on your risk tolerance. Volume Filtering: Set volume threshold to 1.0 (default, effectively disabled) or lower to effectively disable volume filtering if you trade instruments with unreliable volume data or want to test without volume confirmation. Standard confirmation uses 1.2-1.5 threshold. MACD Period Selection: Standard MACD(12,26,9) provides balanced signals suitable for most trading. Shorter periods (8,17,7) for faster signals, longer (15,30,12) for smoother signals. Adjust based on your timeframe and trading style. Consider using configuration presets for optimized settings. Moving Average Type: EMA provides balanced responsiveness with smoothness. RMA is smoother and less responsive. WMA gives more weight to recent prices. SMA gives equal weight to all periods. Choose based on your preference for responsiveness vs. smoothness. Divergence: Pivot-based divergence is more reliable than simple divergence because it uses actual pivot points. Hidden divergence indicates continuation rather than reversal, useful for trend-following strategies. Adjust pivot lookback parameters to control sensitivity. Dynamic Thresholds: Dynamic OB/OS thresholds automatically adapt to volatility. In volatile markets, thresholds widen; in calm markets, they narrow. Adjust the multipliers to fine-tune sensitivity. Enable OB/OS background colors for visual indication. Zero-Line Crosses: Zero-line crosses indicate momentum shifts and can provide early warning signals before MACD crosses the signal line. Enable alerts for zero-line crosses to catch these early signals. Alert Management: Enable alert cooldown (default enabled, 5 bars) to prevent alert spam. Use alert type filter to only evaluate specific alert types. Signal debounce (default enabled, 3 bars) prevents duplicate MACD cross signals during choppy markets. Technical Specifications - Pine Script Version: v6 - Indicator Type: Non-overlay (displays in separate panel below price chart) - Repainting Behavior: Minimal - all signals are based on confirmed bars, ensuring accurate backtesting results - Performance: Optimized with conditional execution. Features only calculate when enabled. - Compatibility: Works on all timeframes (1 minute to 1 month) and all instruments (stocks, forex, crypto, futures, etc.) - Edge Case Handling: All calculations include safety checks for division by zero, NA values, and boundary conditions. Alert cooldowns and signal debounce handle edge cases where conditions never occurred or values are NA. Technical Notes - All MACD values respect percentage mode conversion when enabled - Volume confirmation uses cached volume SMA for performance - Label arrays (divergence) are automatically limited to prevent memory accumulation - Background coloring: OB/OS backgrounds are drawn on top of main background to ensure visibility - All calculations are optimized with conditional execution - features only calculate when enabled (performance optimization) - Signal strength calculation combines multiple factors into a single score for easy filtering - Cross quality calculation rates crossover quality based on angle, volume, and distance from zero - Secondary timeframe MACD uses request.security() for higher timeframe data access - Histogram analysis features (Bollinger Bands, MA, StochMACD) provide additional context beyond basic MACD signals - Statistics table dynamically adjusts to show only enabled features, keeping it clean and relevant - Divergence detection uses MACD line (not histogram) for more reliable signals - Configuration presets automatically optimize MACD parameters for different trading styles - Smart label placement: Labels appear on current bar at confirmation, using strength from tracked extreme point - Label spacing uses effective distance (base distance × spacing multiplier) for better distribution - Zero line polarity enforcement ensures Buy labels only appear when tracked extreme MACD < 0, Sell labels only when tracked extreme MACD > 0 - Label finalization requires MACD exit from OB/OS zone, sufficient bars passed, and recovery/decline percentage confirmation - Strength-based filtering automatically compares and keeps only the strongest label when multiple signals are close together - Enhanced visualization: Line outlines drawn behind main lines for superior visibility (black default, configurable) - Enhanced visualization: Fill between MACD and zero line provides instant visual feedback (green above, red below) - Enhanced visualization: Fill between OB/OS thresholds highlights neutral zone when dynamic levels are active - Custom chart background overrides background mode when enabled, allowing theme-consistent indicator panels
Pine Script®指標
由captain_ua提供
2
Risk Adjusted Geometric Exponent [VynthraQuant]RAGE Index (Risk-Adjusted Geometric Exponent) Overview The RAGE Index is a quantitative momentum oscillator that measures the efficiency and quality of an asset's price trend. Standing for Risk-Adjusted Geometric Exponent , this indicator goes beyond simple price action by evaluating the average logarithmic growth rate relative to the asset's volatility. In institutional finance, it is not just about how much an asset moves, but how it moves. RAGE identifies trends that exhibit high compounding growth with minimal "noise" or volatility. The Logic Behind RAGE The indicator is built on two core quantitative pillars: 1. Geometric Exponent (GE): Instead of simple percentage changes, we calculate the geometric mean of log-returns. This represents the true compounding "velocity" of the price. 2. Volatility Normalization: We divide the GE by the standard deviation of returns (Volatility) over a specific lookback period. How to Interpret the RAGE Index * The Zero Line: The most critical level. When RAGE crosses above 0, the asset has entered a state of positive geometric growth. Below 0, the asset is in a state of efficient decay. * Trend Quality: A rising RAGE value indicates that the trend is becoming more "efficient", growth is increasing while volatility is staying low or decreasing. * Color-Coded Candles: The script features a `force_overlay` function that colors the candles on your main chart. * Bullish Color: Efficient growth detected (Long bias). * Bearish Color: Efficient decay detected (Short bias). Key Features * Logarithmic Accuracy: Uses log-returns to ensure time-additivity and eliminate the bias found in standard percentage calculations. * Adaptive to Volatility: Unlike a standard RSI or MACD, RAGE penalizes "choppy" price action, helping you stay out of sideways markets. * Optimized Performance: Written in Pine Script v6 with high-efficiency math to ensure fast loading even on lower timeframes. Settings * GE Lookback: The window used to calculate the average growth rate. * Volatility Lookback: The window used to measure the "risk" or noise of the price action. General Disclaimer This indicator is for informational and educational purposes only. It does not constitute financial advice. The creator bears no responsibility for any financial decisions or losses resulting from its use. Past performance is not indicative of future results. Islamic Disclaimer All trading activity should be approached with awareness of halal and haram principles. Ensure your investments, instruments, and methods align with Islamic ethical standards. This tool does not promote speculative or impermissible practices.
Pine Script®指標
由VynthraQuant提供
Geometric Exponent [VynthraQuant]Overview The Geometric Exponent is a specialized momentum and trend-strength indicator designed to quantify the average logarithmic growth rate of an asset over a specific lookback period. Unlike standard moving averages, this indicator focuses on the geometric mean of returns, providing a more accurate representation of compounded growth or decay. By smoothing out the noise of daily price fluctuations through log-returns, the Geometric Exponent helps traders identify the underlying "velocity" of a trend. How it Works The indicator calculates the log-return for each bar within the user-defined GE Lookback period. It then computes the arithmetic mean of these log-returns, which mathematically represents the exponent of the geometric growth over that window. Positive Values: Indicate a period of geometric growth (upward trend). Negative Values: Indicate a period of geometric decay (downward trend). Zero Line: Acts as the equilibrium point where there is no net growth. Key Features Log-Return Basis: Better suited for financial time series analysis than simple percentage changes, as log-returns are time-additive. Customizable Lookback: Adjust the GE Lookback to fit your trading style, from fast-reacting scalping to long-term trend following. Clean Visuals: An oscillator-style plot that makes it easy to spot momentum shifts and divergences. How to Use Trend Confirmation: Look for the Geometric Exponent to stay consistently above zero for long-term bullish trends and below zero for bearish trends. Mean Reversion: Extreme peaks or valleys in the exponent may suggest that the current growth rate is unsustainable, potentially signaling an upcoming retracement. Divergence: If price makes a new high but the Geometric Exponent makes a lower high, it suggests the "compounding power" of the trend is weakening. General Disclaimer This indicator is for informational and educational purposes only. It does not constitute financial advice. The creator bears no responsibility for any financial decisions or losses resulting from its use. Past performance is not indicative of future results. Islamic Disclaimer All trading activity should be approached with awareness of halal and haram principles. Ensure your investments, instruments, and methods align with Islamic ethical standards. This tool does not promote speculative or impermissible practices.
Pine Script®指標
由VynthraQuant提供
CCI Standard DeviationCCI Standard Deviation – Asymmetric Volatility-Adjusted Trend Filter (CCI SD) The Commodity Channel Index (CCI), created by Donald Lambert in 1980, measures how far the typical price deviates from its statistical average to identify cyclical momentum and trend strength. The standard formula is: CCI = (Typical Price − SMA(Typical Price, n)) / (0.015 × Mean Deviation) where Typical Price = (High + Low + Close)/3. CCI is unbounded and centered around zero: sustained readings above zero indicate bullish momentum, below zero bearish. Classic interpretations often use zero-line crosses or fixed levels (±100, ±200, ±250), but these can be unreliable when CCI volatility changes across market regimes. This indicator was developed to create a more disciplined trend-following tool that aligns with my core risk principle: “always protect to the downside.” Starting from the standard CCI zero-line concept for trend direction, I experimented with standard deviation bands to make the oscillator volatility-adjusted. I then applied deliberate asymmetry: requiring the lower 1σ envelope (CCI − stdev) to cross above a positive threshold for bullish confirmation (high-probability entry only in robust trends), while exiting immediately on any raw CCI weakness below a negative threshold (quick downside protection). User inputs for both thresholds were added to allow fine-tuning and adaptability across different assets and timeframes. An optional DEMA-smoothed version of the lower envelope provides additional clarity when desired. Extreme zones raw CCI ±240 and lower envelope > 200 or < –200 - are highlighted with background shading to flag rare acceleration or capitulation phases. How it works Standard CCI calculated on typical price (default length 38). Rolling standard deviation of the CCI itself (default length 13) measures the oscillator’s recent volatility. Lower envelope = CCI − stdev (dn). Optional DEMA smoothing (default length 12) can be toggled. Trend logic: Bullish regime only when lower envelope → Long Threshold (default +10) → statistical proof of strength Bearish/neutral immediately when raw CCI → Short Threshold (default –25) → fast downside protection Origin and development The indicator emerged from wanting a cleaner, more reliable CCI for trend direction. After testing volatility-adjusted versions, the asymmetric design proved superior: it enters only high-conviction uptrends and exits rapidly on weakness, significantly reducing whipsaws while preserving trend capture. Parameters were optimized through extensive backtests on major assets (BTC, ETH, SOL and many more Cryptos; Magnificent 7 stocks, QQQ, SPX, gold). The defaults were selected for the best average Sortino ratio and lowest maximum drawdown across this broad universe, ensuring robustness and avoiding single-asset overfitting. How to use it Green triangle below bar → lower envelope crosses above Long Threshold → high-conviction bullish trend confirmed → enter or add to longs Magenta triangle above bar → CCI crosses below Short Threshold → exit longs or go cash/short While lower envelope remains above Long Threshold → hold bullish positions Extreme background shading (dn >200 or CCI ±240) → rare high-attention zones (potential acceleration or exhaustion) Recommended defaults CCI length: 38 SD length: 13 Long threshold: +10 Short threshold: –25 Optional MA length: 12 (DEMA of lower envelope) All visual elements (bar coloring, signals, background, smoothed line) are toggleable for personal preference. This indicator is designed as a trend-strength and risk-management filter and is not intended as a standalone trading system. Disclaimer: This is not financial advice. Backtests are based on past results and are not indicative of future performance.
Pine Script®指標
由PaulWegelin提供
1