立即開始

Display

CanvasLibrary "Canvas" A library implementing a kind of "canvas" using a table where each pixel is represented by a table cell and the pixel color by the background color of each cell. To use the library, you need to create a color matrix (represented as an array) and a canvas table. The canvas table is the container of the canvas, and the color matrix determines what color each pixel in the canvas should have. max_canvas_size() Function that returns the maximum size of the canvas (100). The canvas is always square, so the size is equal to rows (as opposed to not rows multiplied by columns).   Returns: The maximum size of the canvas (100). get_bg_color(color_matrix) Get the current background color of the color matrix. This is the default color used when erasing pixels or clearing a canvas.   Parameters:      color_matrix : The color matrix.   Returns: The current background color. get_fg_color(color_matrix) Get the current foreground color of the color matrix. This is the default color used when drawing pixels.   Parameters:      color_matrix : The color matrix.   Returns: The current foreground color. set_bg_color(color_matrix, bg_color) Set the background color of the color matrix. This is the default color used when erasing pixels or clearing a canvas.   Parameters:      color_matrix : The color matrix.      bg_color : The new background color. set_fg_color(color_matrix, fg_color) Set the foreground color of the color matrix. This is the default color used when drawing pixels.   Parameters:      color_matrix : The color matrix.      fg_color : The new foreground color. color_matrix_rows(color_matrix, rows) Function that returns how many rows a color matrix consists of.   Parameters:      color_matrix : The color matrix.      rows : (Optional) The number of rows of the color matrix. This can be omitted, but if used, can speed up execution.   Returns: The number of rows a color matrix consists of. pixel_color(color_matrix, x, y, rows) Get the color of the pixel at the specified coordinates.   Parameters:      color_matrix : The color matrix.      x : The X coordinate for the pixel. Must be between 0 and "color_matrix_rows() - 1".      y : The Y coordinate for the pixel. Must be between 0 and "color_matrix_rows() - 1".      rows : (Optional) The number of rows of the color matrix. This can be omitted, but if used, can speed up execution.   Returns: The color of the pixel at the specified coordinates. draw_pixel(color_matrix, x, y, pixel_color, rows) Draw a pixel at the specified X and Y coordinates. Uses the specified color.   Parameters:      color_matrix : The color matrix.      x : The X coordinate for the pixel. Must be between 0 and "color_matrix_rows() - 1".      y : The Y coordinate for the pixel. Must be between 0 and "color_matrix_rows() - 1".      pixel_color : The color of the pixel.      rows : (Optional) The number of rows of the color matrix. This can be omitted, but if used, can speed up execution. draw_pixel(color_matrix, x, y, rows) Draw a pixel at the specified X and Y coordinates. Uses the current foreground color.   Parameters:      color_matrix : The color matrix.      x : The X coordinate for the pixel. Must be between 0 and "color_matrix_rows() - 1".      y : The Y coordinate for the pixel. Must be between 0 and "color_matrix_rows() - 1".      rows : (Optional) The number of rows of the color matrix. This can be omitted, but if used, can speed up execution. erase_pixel(color_matrix, x, y, rows) Erase a pixel at the specified X and Y coordinates, replacing it with the background color.   Parameters:      color_matrix : The color matrix.      x : The X coordinate for the pixel. Must be between 0 and "color_matrix_rows() - 1".      y : The Y coordinate for the pixel. Must be between 0 and "color_matrix_rows() - 1".      rows : (Optional) The number of rows of the color matrix. This can be omitted, but if used, can speed up execution. init_color_matrix(rows, bg_color, fg_color) Create and initialize a color matrix with the specified number of rows. The number of columns will be equal to the number of rows.   Parameters:      rows : The number of rows the color matrix should consist of. This can be omitted, but if used, can speed up execution. It can never be greater than "max_canvas_size()".      bg_color : (Optional) The initial background color. The default is black.      fg_color : (Optional) The initial foreground color. The default is white.   Returns: The array representing the color matrix. init_canvas(color_matrix, pixel_width, pixel_height, position) Create and initialize a canvas table.   Parameters:      color_matrix : The color matrix.      pixel_width : (Optional) The pixel width (in % of the pane width). The default width is 0.35%.      pixel_height : (Optional) The pixel width (in % of the pane height). The default width is 0.60%.      position : (Optional) The position for the table representing the canvas. The default is "position.middle_center".   Returns: The canvas table. clear(color_matrix, rows) Clear a color matrix, replacing all pixels with the current background color.   Parameters:      color_matrix : The color matrix.      rows : The number of rows of the color matrix. This can be omitted, but if used, can speed up execution. update(canvas, color_matrix, rows) This updates the canvas with the colors from the color matrix. No changes to the canvas gets plotted until this function is called.   Parameters:      canvas : The canvas table.      color_matrix : The color matrix.      rows : The number of rows of the color matrix. This can be omitted, but if used, can speed up execution.
Pine Script™腳本庫
由lejmer提供
1
TPCLines_PublicLibrary "TPCLines_Public" Helpers for lines lineVA(start, lines, labels, lineColor, labelBgColor, labelTextColor, highPrice, lowPrice, extend, style, width, labelText, labelSize, labelStyle, labelTextAlign, bi) Draws a vertical line and optional label on the chart.   Parameters:      start : The start bar index or time.      lines : Line array to which the created line will be pushed.      labels : Label array to which the created label will be pushed.      lineColor : The color for the line and label.      labelBgColor : The background color for the label.      labelTextColor : The text color for the label.      highPrice : The upper price for the line.      lowPrice : The lower price for the line.      extend : Options for toggline line extend (extend.right, extend.left, extend.both, or extend.none). If none is provided, provides a best guess.      style : The line's style. Defaults to line.style_dotted.      width : The line's width. Defaults to 1.      labelText : Optional text to display next to the line.      labelSize : The label's size. Defaults to size.tiny.      labelStyle : The label's style. Defaults to label.style_label_left.      labelTextAlign : The label's text alignment. Defaults to text.align_center.      bi : Set true to use bar indices, set false to use time. Defaults to true (use bar indices).   Returns: Nothing. Draws a line and optional label on the chart. lineHA(price, lines, labels, lineColor, labelBgColor, extend, labelTextColor, labelText, end, start, bi, showPrice, pips, style, width, labelAlign, labelSize, labelStyle, labelTextAlign) Draws a horizontal line and optional label on the chart.   Parameters:      price : The price at which to draw the lie.      lines : Line array to which the created line will be pushed.      labels : Label array to which the created label will be pushed.      lineColor : The color for the line and label.      labelBgColor : The background color for the label.      extend : Options for toggline line extend (extend.right, extend.left, extend.both, or extend.none). Defaults to extend.none.      labelTextColor : The text color for the label.      labelText : Optional text to display next to the line.      end : The time or bar index to end the line at.      start : The time or bar index to start the line at.      bi : Set true to use bar indices, set false to use time. Defaults to true (use bar indices).      showPrice : Option to show the price on the label.      pips : If a value is provided, will be displayed on the label.      style : The line's style. Defaults to line.style_solid.      width : The line's width. Defaults to 1.      labelAlign : Which side of the line to align the label on. Can be r for right, l for left, c for center, or t for the current time.      labelSize : The label's size. Defaults to size.tiny.      labelStyle : The label's style. Defaults to label.style_none.      labelTextAlign : The label's text alignment. Defaults to text.align_center.   Returns: Nothing. Draws a line and optional label on the chart. lineH() lineV()
Pine Script™腳本庫
由TPCharts提供
HA_CandlesLibrary "HA_Candles" Heikin Ashi Candles HA_Close() Heikin Ashi Modified Close   Returns: Heikin Ashi Modified Close HA_Open() Heikin Ashi Modified Open   Returns: Heikin Ashi Modified Open HA_High() Heikin Ashi Modified High   Returns: Heikin Ashi Modified High HA_Low() Heikin Ashi Modified Low   Returns: Heikin Ashi Modified Low HA_Delta(Heikin) Heikin Ashi Delta   Parameters:      Heikin : Ashi Close, Heikin Ashi Open   Returns: Heikin Ashi Delta
Pine Script™腳本庫
由smhoma提供
1
easytableLibrary "easytable" Create tables easily, with minimal code      ▦ FEATURES ▦                     █ Create tables █ JSON To Table █ Change Colors █ Array to Rows/Columns █ Pre-Styles █ Change Text Size █ Delete Rows/Columns █ Blink Cells                   indentify_table_id() Identifies all tables ID number in each cell(0,0). get_table_by_id(id_number) Get table object by ID number.   Parameters:      id_number : (int) ID number of the table to fetch.   Returns: table. change_cells_color(table_object, cells_color, start_column, end_column, start_row, end_row) Change cells background colors.   Parameters:      table_object : (table) table object to be changed.      cells_color : (color) Cells color.      start_column : (int) Start column.      end_column : (int) End column.      start_row : (int) Start Row.      end_row : (int) End Row to change.   Returns: Void. change_cells_text_color(table_object, text_color, start_column, end_column, start_row, end_row) Change cells text colors.   Parameters:      table_object : (table) table object to be changed.      text_color : (color) Text color.      start_column : (int) Start column.      end_column : (int) End column.      start_row : (int) Start Row.      end_row : (int) End Row.   Returns: Void. change_all_table_text_color(table_object, text_color, table_column_size, table_row_size) Change All table text color.   Parameters:      table_object : (table) table object to be changed.      text_color : (color) Text color.      table_column_size : (int) Size of the table columns.      table_row_size : (int) Size of the table rows.   Returns: Void. change_table_size(table_object, n_of_columns, n_of_rows, tbl_size) Change table size.   Parameters:      table_object : (table) table object to be changed.      n_of_columns : (int) Size of the table columns.      n_of_rows : (int) Size of the table rows.      tbl_size : (string) size of the table.   Returns: Void. change_cells_text_size(text_size, start_column, end_column, start_row, end_row, table_id) Change table cells text size .   Parameters:      text_size : (string) Text size.      start_column : (int) Start column.      end_column : (int)(optional) End column.      start_row : (int)(optional) Start Row.      end_row : (int)(optional) End Row.      table_id : (int)(optional) Number of the ID of the table.   Returns: Void. table_delete_row(table_object, table_column_size, start_row, end_row) Delete specified rows from table.   Parameters:      table_object : (table) table object to be changed.      table_column_size : (int) Table columns max size.      start_row : (int) Start row to delete.      end_row : (int)(optional) End row to delete (optional — Assumes start_row value).   Returns: Void. table_delete_column(table_object, table_row_size, start_column, end_column) Delete specified columns from table.   Parameters:      table_object : (table) table object to be changed.      table_row_size : (int) Table rows max size.      start_column : (int) Start column to delete.      end_column : (int)(optional) End column to delete (optional — Assumes start_column value).   Returns: Void. array_to_table_column_auto(column_to_insert, array_to_insert, table_id) Insert string array to table column without passing table object.   Parameters:      column_to_insert : (int) Column to be inserted.      array_to_insert : (string array) Start column to delete.      table_id : (int)(optional) Number of the ID of the table.   Returns: Void. array_to_table_row_auto(row_to_insert, array_to_insert, table_id) Insert string array to table row without passing table object.   Parameters:      row_to_insert : (int) Column to be inserted.      array_to_insert : (string array) Start column to delete.      table_id : (int)(optional) Number of the ID of the table.   Returns: Void. array_to_table_row(table_object, row_to_insert, array_to_insert) Insert string array to table row by passing table object.   Parameters:      table_object : (table) table object to be changed.      row_to_insert : (int) Row to be inserted.      array_to_insert : (string array) Start column to delete.   Returns: Void. array_to_table_column(table_object, column_to_insert, array_to_insert) Insert string array to table column by passing table object.   Parameters:      table_object : (table) table object to be changed.      column_to_insert : (int) Column to be inserted.      array_to_insert : (string array) Start column to delete.   Returns: Void. blink_cell(cell_column, cell_row, c_color, blink_interval_ms, table_id) Changes cell color at set intervals (blink).   Parameters:      cell_column : (int) Cell column position.      cell_row : (int) Cell row position.      c_color : (color) Color to blink.      blink_interval_ms : (int)(opt) Interval in milliseconds.      table_id : (int)(opt) Table ID number. change_table_style(table_object, number_of_columns, number_of_rows, color) Changes table pre-style by selecting a pre-style number.   Parameters:      table_object : (table) table object to be changed.      number_of_columns : (int) Table column size.      number_of_rows : (int) Table row size.      color : 1 (color) Color of .   Returns: Void. create_table_clean(n_of_columns, n_of_rows, position) Create a simple(blank) table without any styling.   Parameters:      n_of_columns : (int) Numbers of columns in the table.      n_of_rows : (int) Number of rows in the table.      position : (string) table position.   Returns: table object. create_table_with_style(n_of_columns, n_of_rows, style_number, position) Create table with a pre-set style.   Parameters:      n_of_columns : (int) Numbers of columns in the table.      n_of_rows : (int) Number of rows in the table.      style_number : (int) Style number.      position : (string) table position.   Returns: table object. json_to_table(raw_json) Create table based on input raw json string.   Parameters:      raw_json : (int) Raw json string.   Returns: table object. json_example() Example function that display a table based on a json example_create_table()
Pine Script™腳本庫
由MA_PT提供
8
Logger Library For Pinescript (Logging and Debugging)Library "LoggerLib" This is a logging library for Pinescript. It is aimed to help developers testing and debugging scripts with a simple to use logger function. Pinescript lacks a native logging implementation. This library would be helpful to mitigate this insufficiency. This library uses table to print outputs into its view. It is simple, customizable and robust. You can start using it's .log() method just like any other logging method in other languages. ////////////////// USAGE ////////////////// -- Recommended: Please Read The Documentation From Source Code Below. It Is Much More Readable There And Will Be Updated Along With Newer Versions. -- Importing the Library --------------------- import paragjyoti2012/LoggerLib/ as Logger .init() : Initializes the library and returns the logger pointer. (Later will be used as a function parameter) .initTable: Initializes the Table View for the Logger and returns the table id. (Later will be used as a function parameter) parameters: logger: The logger pointer got from .init() max_rows_count: Number of Rows to display in the Logger Table (default is 10) offset: The offset value for the rows (Used for scrolling the view) position: Position of the Table View Values could be: left right top-right (default is left) size: Font Size of content Values could be: small normal large (default is small) hide_date: Whether to hide the Date/Time column in the Logger (default is false) returns: Table example usage of .initTable() import paragjyoti2012/LoggerLib/1 as Logger var logger=Logger.init() var logTable=Logger.initTable(logger, max_rows_count=20, offset=0, position="top-right") ------------------- LOGGING ------------------- .log() : Logging Method params: (string message, |string| logger, table table_id, string type="message") logger: pass the logger pointer from .init() table_id: pass the table pointer from .initTable() message: The message to log type: Type of the log message Values could be: message warning error info success (default is message) returns: void /////////////////////////////////////// Full Boilerplate For Using In Indicator /////////////////////////////////////// P.S: Change the | (pipe) character into square brackets while using in script (or copy it from the source code instead) offset=input.int(0,"Offset",minval=0) size=input.string("small","Font Size",options=|"normal","small","large"|) rows=input.int(15,"No Of Rows") position=input.string("left","Position",options=|"left","right","top-right"|) hide_date=input.bool(false,"Hide Time") import paragjyoti2012/LoggerLib/1 as Logger var logger=Logger.init() var logTable=Logger.initTable(logger,rows,offset,position,size,hide_date) rsi=ta.rsi(close,14) |macd,signal,hist|=ta.macd(close,12,26,9) if(ta.crossunder(close,34000)) Logger.log("Dropped Below 34000",logger,logTable,"warning") if(ta.crossunder(close,35000)) Logger.log("Dropped Below 35000",logger,logTable) if(ta.crossover(close,38000)) Logger.log("Crossed 38000",logger,logTable,"info") if(ta.crossunder(rsi,20)) Logger.log("RSI Below 20",logger,logTable,"error") if(ta.crossover(macd,signal)) Logger.log("Macd Crossed Over Signal",logger,logTable) if(ta.crossover(rsi,80)) Logger.log("RSI Above 80",logger,logTable,"success") //////////////////////////// // For Scrolling the Table View //////////////////////////// There is a subtle way of achieving nice scrolling behaviour for the Table view. Open the input properties panel for the table/indicator. Focus on the input field for "Offset", once it's focused, you could use your mouse scroll wheel to increment/decrement the offset values; It will smoothly scroll the Logger Table Rows as well. ///////////////////// For any assistance using this library or reporting issues, please write in the comment section below. I will try my best to guide you and update the library. Thanks :) /////////////////////
Pine Script™腳本庫
由CyberMensch提供
21
DrawIndicatorOnTheChartLibrary "DrawIndicatorOnTheChart" this library is used to show an indicator (such RSI, CCI, MOM etc) on the main chart with indicator's horizontal lines in a window. Location of the window is calculated dynamically by last price movemements drawIndicator(indicatorName, indicator, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation) draws the related indicator on the chart   Parameters:      indicatorName : is the indicator name as string such "RSI", "CCI" etc      indicator : is the indicator you want to show, such rsi(close, 14), mom(close, 10) etc      indicatorcolor : is the color of indicator line      period : is the length of the window to show      indimax_ : is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"      indimin_ : is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"      levels : is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)      precision : is the precision/number of decimals that is used to show indicator values, for example for RSI set it 2      xlocation : is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle   Returns: none
Pine Script™腳本庫
由LonesomeTheBlue提供
14
amibrokerLibrary "amibroker" This library consists of functions from amibroker that doesn't exist on tradingview pinescript. The example of these are the ExRem and Flip. In the example below, I used ExRem to remove the excessive buy and sell signals. Meanwhile, I used the Flip to highlight the bg color when there is an open position. exrem(series1, series2) Removes excessive signals. Pinescript version of ExRem in Amibroker (www.amibroker.com)   Parameters:      series1 : boolean      series2 : boolean   Returns: boolean flip(series1, series2) works as a flip/flop device or "latch". Pinescript version of Flip in Amibroker: (www.amibroker.com)   Parameters:      series1 : boolan      series2 : boolean   Returns: boolean.
Pine Script™腳本庫
由yourtradingbuddy提供
3
LabelsLibrary "Labels" Functions to create labels, from simple to complex. labelSimple() Creates a label each time a condition is true. All label parameters can be customised. _condition The condition which must evaluate true for the label to be printed. _x The x location. _y The y location. _text The text to print on the label. _color The colour of the label. _textColor The colour of the text. _style The style of the label. _yloc The y location type. Returns An unnamed label object with the supplied characteristics. To give it a name, assign the output of the function to a label variable, as in the example below. labelLast() Creates a label each time a condition is true. All label parameters can be customised. + Option to keep only the most recent label. + Option to display the label a configurable number of bars ahead. _offset How many bars ahead to draw the label. _keepLast If true (the default), keeps only the most recent label. If false, prints labels up to the TradingView limit. _condition The condition which must evaluate true for the label to be printed. _y The y location. _text The text to print on the label. _color The colour of the label. _textColor The colour of the text. _style The style of the label. _yloc The y location type. Returns A named label object with the supplied characteristics. labelTextAndFloat() Creates a label each time a condition is true. All label parameters can be customised. Option to keep only the most recent label. Option to display the label a configurable number of bars ahead; otherwise the x location is fixed at the bar time. + Prints (optional) text and a floating-point number on the next line. _offset How many bars ahead to draw the label. _float The floating-point number that you want to display on the label. _keepLast If true (the default), keeps only the most recent label. If false, prints labels up to the TradingView limit. _condition The condition which must evaluate true for the label to be printed. _y The y location. _text The text to print on the label. _color The colour of the label. _textColor The colour of the text. _style The style of the label. _yloc The y location type. Returns A named label object with the supplied characteristics. labelTextAndFloatSigFig() Creates a label each time a condition is true. All label parameters can be customised. Option to keep only the most recent label. Option to display the label a configurable number of bars ahead; otherwise the x location is fixed at the bar time. Prints (optional) text and a floating-point number on the next line + to a given number of significant figures. _offset How many bars ahead to draw the label. _sigNumFig The number of significant figures to display the floating-point number to. _float The floating-point number that you want to display on the label. _keepLast If true (the default), keeps only the most recent label. If false, prints labels up to the TradingView limit. _condition The condition which must evaluate true for the label to be printed. _y The y location. _text The text to print on the label. _color The colour of the label. _textColor The colour of the text. _style The style of the label. _yloc The y location type. Returns A named label object with the supplied characteristics. labelTextAndFloatDecimals() Creates a label each time a condition is true. All label parameters can be customised. Option to keep only the most recent label. Option to display the label a configurable number of bars ahead. Prints (optional) text and a floating-point number on the next line + to a given number of decimal places. _offset How many bars ahead to draw the label. _decimals The number of decimal places to display the floating-point number to. _float The floating-point number that you want to display on the label. _keepLast If true (the default), keeps only the most recent label. If false, prints labels up to the TradingView limit. _condition The condition which must evaluate true for the label to be printed. _y The y location. _text The text to print on the label. _color The colour of the label. _textColor The colour of the text. _style The style of the label. _yloc The y location type. Returns A named label object with the supplied characteristics.
Pine Script™腳本庫
由SimpleCryptoLife提供
1
CreateAndShowZigzagLibrary "CreateAndShowZigzag" Functions in this library creates/updates zigzag array and shows the zigzag getZigzag(zigzag, prd, max_array_size) calculates zigzag using period Parameters: zigzag : is the float array for the zigzag (should be defined like "var zigzag = array.new_float(0)"). each zigzag points contains 2 element: 1. price level of the zz point 2. bar_index of the zz point prd : is the length to calculate zigzag waves by highest(prd)/lowest(prd) max_array_size : is the maximum number of elements in zigzag, keep in mind each zigzag point contains 2 elements, so for example if it's 10 then zigzag has 10/2 => 5 zigzag points Returns: dir that is the current direction of the zigzag showZigzag(zigzag, oldzigzag, dir, upcol, dncol) this function shows zigzag Parameters: zigzag : is the float array for the zigzag (should be defined like "var zigzag = array.new_float(0)"). each zigzag points contains 2 element: 1. price level of the zz point 2. bar_index of the zz point oldzigzag : is the float array for the zigzag, you get copy the zigzag array to oldzigzag by "oldzigzag = array.copy(zigzay)" before calling get_zigzag() function dir : is the direction of the zigzag wave upcol : is the color of the line if zigzag direction is up dncol : is the color of the line if zigzag direction is down Returns: null
Pine Script™腳本庫
由LonesomeTheBlue提供
17
LineGetPriceOnLogScaleLibrary "LineGetPriceOnLogScale" This library provides a way to calculate the y-coordinate of a line on a specified bar when the chart scale is Log. The built-in `line.get_price()` function only works with linear scale and gives incorrect results when the chart is in Log scale. The library only works with `bar_index` values and `xloc.bar_index`-based lines, `time`-based lines will cause errors to appear. coordGetPriceLog(x1, y1, x2, y2, xi) Calculates the y-coordinate on the specified bar on the logarithmic scale. Only coordinates based on bar index are applicable, bar time will throw an error. Parameters: x1 : First X coordinate of a line, index of the bar where the line starts. y1 : First Y coordinate of a line, price on the price scale. x2 : Second X coordinate of a line, index of the bar where the line ends. y2 : Second Y coordinate of a line, price on the price scale. xi : Index of the bar for which the price should be calculated. Returns: Price of the line on the bar specified in `xi`, on the logarithmic scale. lineGetPriceLog(_line, xi) Calculates the y-coordinate on the specified bar for the logarithmic scale. Takes a line. Only lines drawn based on `xloc.bar_index` are applicable, `xloc.bar_time` will throw and error. Parameters: _line : The line for which the price is calculated. xi : Index of the bar for which the bar should calculate the price. Returns: Price of the line on the bar specified in `xi`, on the logarithmic scale.
Pine Script™腳本庫
由BeeHolder提供
2
SignificantFiguresLibrary "SignificantFigures" sigFig(float _float, int _figures) @description Takes a floating-point number - one that can, but doesn't have to, include a decimal point - and converts it to a floating-point number with only a certain number of digits left. For example, say you want to display a variable from your script to the user and it comes out to something like 45.366666666666666666666667 or whatever. That looks awful when you, for example, print it in a label. Now you could round it up to the nearest integer easily using a built-in function, or even to a certain number of decimal places using a reasonably simple custom function. But that's a bit arbitrary. Suppose you don't know what asset the script will be used on, and so you can't predict what the price is, and what the value will turn out to be. It could be 0.00045366666666666666666666667 instead. Now if you round it up to 3 decimal places it comes out as 0.000, which is useless. My function will round that number to 0.0004536 instead, if told to do it to 4 significant digits. I think this is more friendly. @function Converts float with arbitrary number of digits to one with a specified number of significant figures. @param float _float is the floating-point number to manipulate. @param int _figures is the number of significant figures you want. @returns Returns a float with the specified number of significant figures
Pine Script™腳本庫
由SimpleCryptoLife提供
7
FunctionDatestringLibrary "FunctionDatestring" Methods to stringify date/time, altho there is already builtin support for it. datetime(unixtime) a stringified date stamp at specified unix time. Parameters: unixtime : int unix timestamp. Returns: string date_(unixtime) a stringified date stamp at specified unix time. Parameters: unixtime : int unix timestamp. Returns: string time_(unixtime) a stringified date stamp at specified unix time. Parameters: unixtime : int unix timestamp. Returns: string
Pine Script™腳本庫
由RicardoSantos提供
4
STRATEGY TESTER ENGINE - ON CHART DISPLAY - PLUG & PLAYSo i had this idea while ago when @alexgrover published a script and dropped a nugget in between which replicates the result of strategy tester on chart as an indicator. So it seemed fair to use one of his strategy to display the results. This strategy tester can now be used in replay mode like an indicator and you can see what happen at a particular section of the chart which was is not possible in default strategy tester results of TV. Please read how each result is calculated so you will know what you are using. This engine shows most common results of strategy tester in a single screen, which are as follows: 1. Starting Capital 2. Current Profit Percentage 3. Max Profit Percentage 4. Gross Profit 5. Gross Loss 6. Total Closed Trades 7. Total Trades Won 8. Total Trades Lost 9. Percentage Profitable 10. Profit Factor 11. Current Drawdown 12. Max Drawdown 13. Liquidation So elaborating on what is what: 1. Starting Capital - This stays 0, which signifies your starting balance as 0%. It is set to 0 so we can compare all other results without any change in variables. If set to 100, then all the results will be increased by 100. Some users might find it useful to set it to 100, then they can change code on line 41 from to and it should show starting balance as 100%. 2. Current Profit Percentage - This shows your current profit adjusted to current price of the candle, not like TV which shows after candle is close. There is a comment on the line 38 which can be removed and your can see unrealized profit as well in this section. Please note that this will affect Draw-down calculations later in this section. 3. Max Profit Percentage - This will show you your max profit achieved during your strategy run, which was not possible yet to see via strategy tester. So, now you can see how much profit was achieved by your strategy during the run and you can compare it with chart to see what happens during bull-run or bear-run, so you can further optimize your strategy to best suit your desired results. 4. Gross Profit - This is total percentage of profit your strategy achieved during entire run as if you never had any losses. 5. Gross Loss - This is total percentage of loss your strategy achieved during entire run as if you never had any profits. 6. Total Closed Trades - This is total number of trades that your strategy has executed so far. 7. Total Trades Won - This is the total number of trades that your strategy has executed that resulted in positive increase in equity. 8. Totals Trades Lost - This is the total number of trades that your strategy has executed that resulted in decrease in equity. 9. Percentage Profitable - This is the ratio between your current total winning trades divided by total closed trades, and finally multiplied by 100 to get percentage results. 10. Profit Factor - This is the ratio between Gross Profit and Gross Loss, so if profit factor is 2, then it indicates that you are set to gain 2 times per your risk per trade on average when total trades are executed. 11. Current Drawdown - This is important section and i want you to read this carefully. Here draw-down is calculated very differently than what TV shows. TV has access to candle data and calculates draw-down accordingly as per number of trades closed, but here DD is calculated as difference between max profit achieved and current profit. This way you can see how much percentage you are down from max peak of equity at current point in time. You can do back-test of the data and see when peak was achieved and how much your strategy did a draw-down candle by candle. 12. Max Drawdown - This is also calculated differently same as above, current draw-down. Here you can see how much max DD your strategy did from a peak profit of equity. This is not set as max profit percentage is set because you will see single number on display, while idea is to keep it custom. I will explain. So lets say, your max DD on TV is 30%. Here this is of no use to see Max DD , as some people might want to see what was there max DD 1000 candles back or 10 candle back. So this will show you your max DD from the data you select. TV shows 25000 candle data in a chart if you go back, you can set the counter to 24999 and it will show you max DD as shown on TV, but if you want custom section to show max DD , it is now possible which was not possible before. Also, now let's say you put DD as 24999 and open a chart of an asset that was listed 1 week ago, now on 1H chart max DD will never show up until you reach 24999 candle in data history, but with this you can now enter a manual number and see the data. 13. Liquidation - This is an interesting feature, so now when your equity balance is less than 0 and your draw-down goes to -100, it will show you where and at what point in time you got liquidated by adding a red background color in the entire section. This is the most fun part of this script, while you can only see max DD on TV. ------------------------------------------------------------------------------ How to Use - 1 word, plug and play. Yes. Actual codes start from line 33. select overlay=false or remove it from the title in your strategy on first line, Just copy the codes from line 33 to 103, then go to end section of your strategy and paste the entire code from line 33 to line 103, see if you have any duplicate variable, edit it, Add to chart. What you see above is very contracted view. Here is how it looks when zoomed in. imgur.com ---------------------------------------------------------------------------------- Feel free to edit and share and use. If you use it in your scripts, drop me tag. Cheers.
Pine Script™策略
由FiatDropout提供