Floorpivots — 指標和策略

Daily Floor Pivots Daily Floor Pivots with Comprehensive Statistical Analysis Overview This indicator combines traditional floor pivot levels with golden zone analysis and comprehensive statistical insights derived from 15 years of historical NQ futures data. While the pivot levels and golden zones can be applied to any instrument, the statistical tables are specifically calibrated for NQ/MNQ futures based on analysis of 2,482 NY Regular Trading Hours (RTH) sessions from 2010-2025. What Makes This Indicator Original Unlike standard pivot indicators that merely plot levels, this tool provides: Enhanced Golden Zone Analysis: Calculates not only the main golden zone (0.5-0.618 retracement of previous day's range) but also golden zones between each pivot pair (PP-R1, R1-R2, R2-R3, PP-S1, S1-S2, S2-S3) Data-Driven Statistical Tables: Two comprehensive tables displaying real statistics from 2,482 trading days of NQ analysis, including: Probability-based touch rates and continuation patterns Context-aware statistics based on opening position Gap analysis and behavioral patterns First touch dynamics and time-to-reach averages Granular Customization: Every visual element and statistical section can be independently toggled, allowing traders to focus on what matters most to their strategy How It Works Pivot Calculation Methodology The indicator uses the standard floor pivot formula based on the previous day's price action: Pivot Point (PP) = (Previous High + Previous Low + Previous Close) / 3 Resistance Levels: R1, R2, R3 calculated from PP and previous range Support Levels: S1, S2, S3 calculated from PP and previous range Golden Zone Calculations Main Golden Zone: The 0.5 to 0.618 Fibonacci retracement of the previous day's range, representing a key reversal and continuation area. Inter-Pivot Golden Zones: For each adjacent pivot pair, golden zones are calculated as: Resistance pairs (PP→R1, R1→R2, R2→R3): 0.5-0.618 range from the lower pivot Support pairs (PP→S1, S1→S2, S2→S3): 0.382-0.5 range from the upper pivot These zones represent high-probability areas where price tends to react when moving between pivot levels. Statistical Analysis Source All statistics displayed in the tables are derived from external Python analysis of 15 years of 1-minute NQ futures data (2010-2025), specifically analyzing NY RTH sessions (9:30 AM - 4:00 PM EST). The analysis tracked: 2,482 complete trading days Intraday pivot touches and closes Opening position context Gap behavior relative to previous day Time-of-day patterns Sequential pivot interactions IMPORTANT: While the pivot levels and golden zones are universally applicable mathematical calculations that work on any instrument, the statistical percentages shown in the tables are specific to NQ/MNQ behavior only. Do not assume these statistics transfer to other instruments. Configuration Guide Basic Settings Number of Periods Back (1-20, default: 3) Controls how many historical pivot periods are displayed on the chart Setting to 1 shows only current day's pivots Higher values show more historical context Labels Position (Left/Right) Choose whether pivot labels appear on the left or right side of each level line Line Width (1-5, default: 2) Adjust the thickness of all pivot and golden zone lines Golden Zone Customization Show Daily Golden Zone (0.5-0.618) Toggle the main golden zone on/off When enabled, displays a shaded box between the 0.5 and 0.618 retracement levels Line Color / Fill Color Customize the appearance of the main golden zone Fill color determines the shaded box transparency Show Labels / Show Prices Control whether "0.5" and "0.618" labels appear Control whether price values are displayed on labels Inter-Pivot Golden Zones Six toggle options allow you to show/hide individual golden zones: PP to R1 / PP to S1: Most frequently touched (60.8% / 50.9%) R1 to R2 / S1 to S2: Moderately touched (25.2% / 24.0%) R2 to R3 / S2 to S3: Rarely touched (9.4% / 10.5%) Line Color / Fill Color: Customize appearance of all inter-pivot zones Show Labels / Show Prices: Control labeling for inter-pivot zones Usage Tip: Disable outer zones (R2-R3, S2-S3) on lower volatility days to reduce chart clutter. Pivot Display Show Support/Resistance Levels: Master toggle for all pivot lines Show SR Labels / Show SR Prices: Control labeling on pivot levels Individual level toggles and colors: PP (Pivot Point): The central reference point R1/S1: Primary resistance/support (38.9% / 35.4% touch rate) R2/S2: Secondary levels (15.6% / 16.1% touch rate) R3/S3: Extended levels (5.1% / 7.3% touch rate) Color Customization: Each level's color can be independently set Overall Statistics Table Show Overall Statistics Table: Master toggle Table Size: tiny/small/normal/large/huge/auto Table Position: Top Left/Top Right/Bottom Left/Bottom Right Section Toggles (enable/disable individual sections): Current Session Info Touch & Close Rates Continue & Reject Rates First Touch Statistics Golden Zone Statistics Daily Close Distribution Highest/Lowest Levels Reached Context Statistics Table Show Context Statistics Table: Master toggle Table Size: tiny/small/normal/large/huge/auto Table Position: Top Left/Top Right/Bottom Left/Bottom Right Section Toggles: Current Opening Zone Opening Zone Statistics Previous Day Gap Context Understanding the Statistical Tables TABLE 1: OVERALL STATISTICS This table presents universal statistics from 2,482 days of NQ analysis. Current Session Info Displays real-time context for the active session: Open: Where the current RTH session opened relative to pivots (e.g., "GZ_TO_R1" means opened between the PP-R1 golden zone and R1) Now: Current price position relative to pivots Direction: Bull (close > open), Bear (close < open), or Flat How to use: This section helps you quickly understand where price opened and where it currently is, providing immediate context for the day's action. Touch & Close Rates Shows probability that each pivot level will be reached during RTH: Touch %: Percentage of days where price touched this level at any point Example: R1 touched 38.9% of days, PP touched 57.5% of days Close %: Percentage of days where price closed beyond this level Example: R1 close beyond happened 39.8% of days How to interpret: Higher touch rates indicate more reliable levels for intraday targeting The difference between touch and close rates shows rejection frequency PP has the highest touch rate (57.5%), making it the most magnetic level Outer levels (R3/S3) have low touch rates (5.1%/7.3%), indicating rare extension days Continue & Reject Rates When a level is touched, these statistics show what happens next: Continue %: Probability price continues through the level Example: When PP is touched, price continues 88.1% of the time Reject %: Probability price rejects from the level and reverses Example: When R1 is touched, price rejects 50.9% of the time How to interpret: PP shows highest continuation (88.1%), confirming it's a poor reversal level Support levels (S1/S2/S3) show strong rejection rates (62.5%/60.7%/56.1%), making them better reversal candidates Continuation rates above 80% suggest the level is better as a target than an entry First Touch Statistics Analyzes which pivot is typically touched first during RTH: 1st Touch %: Probability this level is the first pivot encountered PP is first touched 37.1% of days (most common) R1 is first touched 26.0% of days S1 is first touched 10.9% of days 1st→Continue: If this level is touched first, probability of continuation S1-S3 show 95.6%-100% continuation when touched first This means when price reaches support first, it usually continues lower Avg Time: Minutes after 9:30 AM EST before first touch PP: 1h 6m average S3: 19m average (when bearish) R3: 3h 19m average (when bullish) How to interpret: Opening away from PP means higher probability of reaching extremes (R2/R3 or S2/S3) When support is touched first (within first 2 hours), expect continuation lower Late-day first touches (after 2 PM) often indicate strong trending days Multi-Touch: Shows how often levels are tested multiple times (92.8%-95.0% across all levels) Golden Zone Statistics Main GZ: 58.5% touch rate for the 0.5-0.618 zone Inter-Pivot zones: PP-R1: 60.8% (highest probability) PP-S1: 50.9% R1-R2: 25.2% S1-S2: 24.0% R2-R3: 9.4% S2-S3: 10.5% How to interpret: Main GZ is touched more often than any individual resistance level PP-R1 and PP-S1 golden zones are high-probability mean reversion areas Outer golden zones (R2-R3, S2-S3) are only relevant on high volatility days Daily Close Distribution Shows where RTH sessions typically close: Above/Below PP: 58.5% close above, 41.5% below (slight bullish bias) Above R1: 24.5% of days Below S1: 18.7% of days In GZ: Only 6.3% close in the golden zone (typically transits through it) How to interpret: Most days (58.5%) have bullish bias (close above PP) Less than 25% of days are strong trending days (beyond R1/S1) Golden zone is an action area, not a resting area Highest/Lowest Levels Reached Distribution of the most extreme level reached: High Resist: R1 (26.0%), R2 (10.8%), R3 (5.1%) Low Support: S1 (35.4%), S2 (1.9%), S3 (0.6%) How to interpret: Most days don't reach beyond R1 or S1 R3/S3 are rare events (5.1%/0.6%), indicating major trending days S1 is reached as lowest level more often than R1 as highest, suggesting downside is more frequently tested TABLE 2: CONTEXT STATISTICS This table provides conditional statistics based on how the session opened. Current Opening Zone Displays which of 13 possible zones the RTH session opened in: ABOVE_R3, R2_TO_R3, R1_TO_R2, GZ_TO_R1, IN_GZ, PP_TO_GZ, AT_PP, GZ_TO_PP, S1_TO_GZ, S2_TO_S1, S3_TO_S2, BELOW_S3 How to use: This immediately tells you the market structure and what type of day to expect. Opening Zone Statistics Detailed statistics for the current opening zone (only shows for 6 major zones): For each zone, you see: Occurs: How often this opening scenario happens GZ_TO_R1: 38.4% (most common) AT_PP: 12.8% S1_TO_GZ: 24.2% R1_TO_R2: 9.4% S2_TO_S1: 6.3% IN_GZ: 3.8% Bull/Bear %: Close direction probability Example: GZ_TO_R1 is perfectly balanced (50.0% bull / 49.6% bear) R1_TO_R2 is bullish (58.1% bull / 41.0% bear) Levels Hit: Probability of reaching each pivot level from this opening Helps identify high-probability targets Example: From GZ_TO_R1, PP is hit 52.9%, R1 is hit 49.0%, S1 is hit 21.6% How to interpret: GZ_TO_R1 (most common): Balanced day, watch PP and GZ for direction clues AT_PP: Slight bullish bias (56.9%), high chance of touching both PP (92.8%) and GZ (90.3%) R1_TO_R2: Bullish bias (58.1%), expect continuation to R2 (58.1% chance) S2_TO_S1: Bullish reversal setup (59.9%), very high chance of S1 touch (82.8%) IN_GZ: Rare opening (3.8%), bullish bias, virtually guaranteed GZ touch (100%) Previous Day Gap Context Shows current gap scenario and typical behavior: Three scenarios: GAP UP: Opened Above Yesterday's High (20.5% of days) R1 Touch: 65.9% (high probability) R2 Touch: 42.1% S1 Touch: 15.0% (low probability) Bias: Bullish continuation GAP DOWN: Opened Below Yesterday's Low (11.3% of days) S1 Touch: 71.5% (high probability) S2 Touch: 55.2% R1 Touch: 12.1% (low probability) Bias: Bearish continuation NO GAP: Opened Within Yesterday's Range (68.2% of days) PP Touch: 69.5% GZ Touch: 71.7% R1 Touch: 35.2% Bias: Balanced (watch for direction at PP/GZ) How to interpret: Gap days (up or down) tend to continue in the gap direction When gapping, fade trades are low probability (15.0% and 12.1%) Most days (68.2%) open within previous range, making PP and GZ critical decision zones The "bias" line provides clear directional guidance for trade selection Practical Application Examples Example 1: Standard Day Setup Scenario: RTH opens at 20,450 PP: 20,400 GZ: 20,390-20,395 R1: 20,425 Previous day high: 20,460 What the tables tell you: Opening Zone: "GZ_TO_R1" (38.4% occurrence) Gap Context: "NO GAP" (68.2% occurrence) Expected behavior: Balanced (50/50 bull/bear) High probability: PP touch (52.9%), GZ touch (56.8%) Moderate probability: R1 touch (49.0%), S1 touch (21.6%) Trade plan: Wait for price to reach PP (52.9% chance) or GZ (56.8% chance) Look for directional confirmation at these levels First target R1 if bullish, S1 if bearish Avoid assuming direction without confirmation (perfectly balanced opening) Example 2: Gap Up Day Scenario: RTH opens at 20,510 Previous day high: 20,460 R1: 20,425 R2: 20,475 What the tables tell you: Gap Context: "GAP UP" (20.5% occurrence) R1 touch: 65.9% probability R2 touch: 42.1% probability S1 touch: Only 15.0% probability Bias: Bullish continuation Trade plan: Favor long setups Target R1 first (65.9% chance), then R2 (42.1%) If R1 breaks, R2 becomes likely target Shorting is low probability (only 15.0% reach S1) Example 3: Opening in Golden Zone Scenario: RTH opens at 20,393 PP: 20,400 GZ: 20,390-20,395 What the tables tell you: Opening Zone: "IN_GZ" (rare, only 3.8% occurrence) Bullish bias: 58.1% GZ touch: 100% (guaranteed - already there) PP touch: 75.3% R1 touch: 41.9% Trade plan: Expect price to test PP (75.3% chance) Slight bullish bias suggests long setups better than shorts Watch how price reacts at PP - likely to continue to R1 (41.9%) This is an uncommon opening, suggesting potential for larger moves Best Practices Match Your Instrument: Remember, statistics are NQ-specific. If trading other instruments, use the levels but disregard the statistical percentages. Combine with Price Action: Use the statistics for probability context, not as standalone signals. Always confirm with price action, volume, and your trading methodology. Adapt Table Display: Don't display all sections all the time. Toggle based on your trading phase: Pre-market: Focus on "Gap Context" to understand the setup Market open: Watch "Opening Zone Statistics" for directional bias Intraday: Monitor "Current Session Info" for position tracking Understand Context: A 60% touch rate doesn't mean guaranteed—it means 40% of days don't touch. Use these probabilities to size positions and manage expectations. Inter-Pivot Golden Zones: These are most useful when price is already in motion toward a level. For example, if price breaks above PP heading to R1, the PP-R1 golden zone (60.8% touch rate) becomes a high-probability pullback area. Time Awareness: The "Avg Time" statistics help you understand urgency. If it's 10:30 AM and S1 hasn't been touched (average is 55 minutes), the window for bearish moves is closing. Technical Notes Time Zone: All times referenced are NY/EST Session Definition: RTH is 9:30 AM - 4:00 PM EST Calculation Period: Pivots update daily based on previous 24-hour period (18:00 previous day to 17:00 current day) Data Source: Statistics derived from 12 years of NQ 1-minute futures data (2013-2025) Sample Size: 2,482 complete RTH trading sessions Disclaimer This indicator provides statistical probabilities based on historical NQ futures data. Past performance does not guarantee future results. The statistical tables are educational tools and should not be the sole basis for trading decisions. Always: Use proper risk management Combine with your own analysis Understand that probabilities are not certainties Remember that statistics are instrument-specific (NQ/MNQ only) Credits Statistical analysis performed using Python analysis of 12 years of historical NQ futures data. All pivot and golden zone calculations use standard mathematical formulas applicable to any instrument.

Simple CPR for intraday index trading Simple CPR is an indicator that displays the Central Pivot Range (CPR) and Support-Resistance pivots. It offers granular customization across CPR, Floor pivots, Developing CPR, and Session High/Low levels. Original concept from Larry Williams, Mark Fisher & Frank Ochoa Modified from " CPR (Central Pivot Range)" script by ajithcpas   What is CPR (Central Pivot Range)? The Central Pivot Range (CPR) is calculated from the previous period’s High (H), Low (L), and Close (C). It forms three levels: • Pivot (P) = (H + L + C) / 3 • Top Central (TC) = ( P - BC) + P • Bottom Central (BC) = ( H + L)/2 Together, these levels form a central zone representing the market’s “value area.” Price trading above the CPR typically indicates bullish sentiment, while trading below the CPR reflects bearish bias. A narrow CPR often precedes strong trending moves, whereas a wider CPR signals potential consolidation. How Pivot Levels are Calculated Beyond CPR, the indicator supports multiple pivot calculation models, including Traditional, Classic, Fibonacci, and Camarilla For example, in the traditional model: • R1 = ( 2 × P ) − L • S1 = ( 2 × P ) − H • Higher levels (R2, R3…) scale proportionally by the prior range (H-L). These levels serve as dynamic intraday support-resistance zones and breakout targets. Key Features ⦿ Multi-Formula CPR : Select Traditional, Classic, Fibonacci, or Camarilla pivots. ⦿ Multi-Timeframe Control : Auto-detect or manually set CPR timeframe (Daily → Yearly). ⦿ Complete Pivot Suite : Extending to five resistance and five support levels (R1–R5, S1–S5) with optional midpoints (R0.5, R1.5, R2.5, R3.5, R4.5, S0.5, S1.5, S2.5, S3.5, S4.5).All levels can be individually toggled on or off, giving traders complete control over the level of chart detail they prefer. ⦿ Full Customization : Independently toggle lines, fills, price labels, and level names. ⦿ Developing CPR & S/R : Real-time projection of next-session CPR, R1, and S1 with separate visibility controls. ⦿ Session High/Low Tracking : Plot Previous-Session High (PH) & Low (PL) with optional labels and prices. ⦿ Look-Back Flexibility : Display any number of historical CPR/pivot periods. ⦿ Styling Precision : Choose line width, style (solid, dashed, dotted), and individual colors. ⦿ Optional Fills : Visualize the CPR zone or CPR–R1/S1 bands with semi-transparent shading. ⦿ Optimized Performance : Efficient array-based drawing for smooth chart performance even with a long history. Use Case CPR analysis helps identify trend bias, volatility contraction/expansion, and key support-resistance zones. This indicator is ideal for intraday indices traders who need a structured yet customizable price-action framework. Disclaimer This script is for educational and technical analysis purposes only. It does not constitute financial advice or a recommendation. Always perform independent analysis and manage risk appropriately before placing trades.

[CP]Pivot Boss Floor Pivots with ATR Dilation and Dynamic Levels INTRODUCTION: Compared to all the Pivot Indicators available on Trading View Public Library, this Floor Pivots Indicator differentiates itself in two major original ways: Dilates the Pivot Support/Resistance Levels into Support/Resistance Bands based on volatility Displays the S/R Levels Dynamically , that is, only those levels will be shown that are close enough to the price resulting in much cleaner looking charts. There were a few features whose logic I had figured out, but I could not implement them due Pine Script’s Limitation (they should really work on increasing Pine Script’s capacity instead of adding more and more features to the language in order to make it look ‘better’): Showing multiple timeframe pivots at the same time (not possible due to Pine Script’s limitation on the ‘Max Number of Outputs’ ) Automatic Detection of highly profitable Double Hot Pivot Zones (DPZ), also due to the ‘Max Number of Outputs’ limit GENERAL USER INPUTS: Most of the settings are self-explanatory, however, a few of them need some explanation: Show Floor Pivots Dynamically – This will turn ON the dynamic pivot levels, please note that this function will work ONLY IN INTRADAY timeframes. Dynamic Pivot ATR Period – Period over which the ATR value is calculated to show the pivots dynamically. ATR Threshold for Dynamic Floor Pivots – Simply put, the indicator will start displaying Pivot Levels if they fall within the 2*ATR distance (default value) of the price. You can increase this number if the volatility increases and vice-versa. Use ATR to Dilate Intraday Pivot Levels – This will turn ON Floor Pivot Dilation, turning pivot ‘lines’ into ‘bands’ . ATR Dilation Factor – This number decides the width of the Pivot bands. Larger this number, thicker the bands. Typically, high volatility stocks will require a higher number. ATR Period – Same as Dynamic Pivot ATR Period, but for Pivot Level Dilation. INDICATOR USAGE EXAMPLES: This indicator works great in conjunction with my Pivot Boss Candlestick Scanner indicator. There are a lot of optimizations I have done in the code, although it looks trivial at first glance, but it's fairly complex. Feel free to use it and modify it as you wish. Here are a few examples where the indicator has shown great entries and exits, with the default settings: NIFTY 5m Chart Reliance 5m Chart Tesla 5m Chart Bitcoin-USDT 15m Chart FINAL WORDS: Please understand that I have Cherry Picked the examples to showcase the capability of the indicator and its usage. DO NOT conflate the accuracy of examples with the accuracy of this indicator. Once you start using floor pivots, you will realize that a lot of days simply don’t give any high probability setups and you will simply sit out of the market and do nothing (which is a good thing). If you really want to learn how to use Pivots, read the book ’Secrets of a Pivot Boss’ . This book can change your life.

Dynamic Pivot Box for Month and Year The basic idea of the ‘Dynamic Pivot Box’ is to show only the Pivots that are closer to the Price. This is, the nearest pivots acting as support and resistance; thus hiding all other pivots which are further away from the price and also hiding the pivots from previous periods… Pivots will be hidden until price breaks out from the current box and moves to the next one. Hopefully, with this change you can focus more on the actual price action/ price patterns on the chart rather than on several/ noisy lines on the screen. **Please note that the recommended use for this indicator is on the daily or higher timeframes if you want to see Year pivots... Monthly pivots can be still seen on the hourly chart, but I am afraid that lower timeframes will not plot the indicator properly.** The Pivots are taken from Frank Ochoa’s book ‘Secrets of a Pivot Boss’, so if you are not familiar with them, I would recommend you to first take a look at the theory behind them. The Pivots in this indicator are divided in two groups: ‘Standard pivot’ and ‘Camarilla’ pivots.; and then this latter is group is divided in two also: the ‘Main Camarilla’ and ‘Regular Camarilla pivot’. You can select which groups of pivots are taken into account for the ‘Dynamic Pivot Box’. If you decide to select all Three Groups: ‘Standard Pivot’, ‘Main Camarilla’ and ‘Regular Camarilla pivot’ you will see ALWAYS 4 pivots surrounding the price. My recommendation is to select only ‘Standard Pivot’ and ‘Main Camarilla’ so that you see only between 2-3 pivots on the screen. This recommended view is actually the default settings. In addition, if you want to further reduce noise from the chart, you can unselect the ‘Lines’ option within the SETTINGS/ STYLE menu. What you see on the chart/sample is actually this indicator plotted twice: 1. Year Pivots which have the default settings and are shown as white ines 2. Month Pivots have also the default settings BUT I also selected the option ‘Previous Pivots’ to show the pivots from previous period , and also I unselected the ‘Lines’ options as mentioned above to reduce noise. You are more than welcome to enhance the current version, my only ask is to please share the enhanced version back with the community. I wish I could make amends or modify the current version myself but I actually just came up with the idea and I paid a coder in Fiverr to develop it.

Floor Pivots_DWM Basic Pivot points. Script is easy to modify to personal requirements, and explained step-by-step on Kodify.com. Original script credits: Kodify.com (kodify.net)