Coinview30 LIQThis indicator is generated by analysis of crypto market liquidity, and it shows how market makers set their make and take price and it guides trade options, stop loss and profit taking level settings.
Pine Script®指標
M-oscillator
GCM Volume-Price EssenceTITLE: GCM Volume-Price Essence
DESCRIPTION:
“Stop trading fake moves. Start seeing the Essence of the market.”
Most indicators fail because they only look at Price. They are blind to the "Fuel" behind the move.
The GCM Volume-Price Essence (GCM VPE) is a next-generation market structure tool that mathematically fuses Price Action with Volume Impact. It filters out low-volume "noise" and highlights high-volume "true moves."
HOW IT WORKS (The Math Behind the Magic)
Unlike standard oscillators (RSI/MACD), the GCM VPE uses a proprietary Volume Impact Engine:
Momentum = PriceChange X Log(1 + VolumeRatio)
• Scenario A: Price moves up 5%, but Volume is low → The indicator ignores it (Fakeout).
• Scenario B: Price moves up 2%, but Volume is massive → The indicator spikes (True Breakout).
KEY FEATURES
1. The Quantum Flow Index (QFI)
The main line that oscillates with the market. It uses an Waves Gradient System:
• Green Waves: Strong Bullish Volume Flow.
• Red Waves: Strong Bearish Volume Flow.
• Gradient Fills: Show the strength of the trend visually.
2. The Quantum Base Line (Dynamic Center)
The "Gravity Center" of the market.
• Blue Line: The trend is Bullish (Look for Buys).
• Orange Line: The trend is Bearish (Look for Sells).
• Strategy: Trade in the direction of the Base Line.
3. Triple Candle Divergence (The "Sniper" Feature) ⚡
A specialized algorithm that detects Instant Momentum Shifts.
• Bullish Div (⚡): Price makes 3 Lower Lows, but Flow turns UP.
• Bearish Div (⚡): Price makes 3 Higher Highs, but Flow turns DOWN.
• Use Case: Excellent for catching tops and bottoms in ranging markets.
4. Signal Symbols
• ◆ (Diamond): Anticipation Signal. The Flow is preparing to cross (Early Warning).
• ⚡ (Lightning): Divergence Signal. Price and Momentum disagree (Reversal Likely).
• ▲ / ▼ (Triangle): Continuation Signal. Strong Volume confirms the trend is continuing.
5. Dynamic Zones (Non-Repainting)
The gray/colored bands represent the "Elastic Limits" of price.
• When the QFI enters the Upper Zone, the market is Overextended (Potential Reversal).
• When the QFI enters the Lower Zone, the market is Undervalued (Potential Bounce).
HOW TO TRADE
🟢 THE BUY SETUP (Long)
1. Trend Check: Ensure the Quantum Base Line is Blue.
2. The Trigger: Wait for the QFI line to cross UP through the Base Line (Look for the ◆ Diamond).
3. The Sniper Entry (Optional): If you see a ⚡ (Lightning) symbol at the bottom of a pullback, this is a high-probability reversal entry.
4. Exit: Close the trade when the QFI hits the top Red Zone (Overbought).
🔴 THE SELL SETUP (Short)
1. Trend Check: Ensure the Quantum Base Line is Orange.
2. The Trigger: Wait for the QFI line to cross DOWN through the Base Line (Look for the ◆ Diamond).
3. The Sniper Entry (Optional): If you see a ⚡ (Lightning) symbol at the top of a rally, this is a high-probability reversal entry.
4. Exit: Close the trade when the QFI hits the bottom Green Zone (Oversold).
IMPORTANT: TRADING OPTIONS? READ THIS CAREFULLY
Option volume is often "fragmented" across hundreds of different strike prices, which can give false signals on individual contracts.
• The Strategy: Apply this indicator to the Spot or Futures chart of the underlying asset (e.g., SPY, NIFTY, BTC).
• The Execution: When the indicator generates a Signal (⚡/◆) on the main chart, then execute your trade on the Option Contract.
• IMPORTANT CAUTION: Do not use this tool directly on an illiquid Option Strike.
SETTINGS & CUSTOMIZATION
• Volume Impact Factor: Adjust how sensitive the tool is to volume spikes (Default: 1.5).
• Divergence Lookback: Choose how many candles to analyze for reversals (Default: 3).
• Full Color Control: Customize every wave, line, and signal color to fit your chart theme.
DISCLAIMER: This tool is for educational and analytical purposes only. Volume analysis works best on assets with real volume data (Stocks, Crypto, Futures). For option contract, read Important Note sited above Do not use this tool directly on an illiquid Option Strike
Pine Script®指標
Volume Conviction Index v1.0Volume Conviction Index (VCI) v1.0
This indicator helps answer a simple question: Does this price move have real strength behind it, or is the volume too weak to trust???
It measures "conviction" through how many participants are in the marketplace by looking at volume in a smart, reliable way:
- Spots unusual volume surges (buying or selling pressure) that stand out from normal (median line plotted) levels.
- visually helps with discretionary calls and allows the median avg of participation not just volume to be 'seen'
- Blends recent volume changes with how volume compares to its typical range.
How to read the chart (super straightforward):
- Teal columns above the zero line: Strong buying conviction — volume supporting the up move (good sign for breakouts or holds).
- Orange columns below zero: Strong selling conviction — heavy participation on the downside (watch for reversals or weakness on rallies).
- Flat/small bars near zero: Low conviction — price might be moving on fumes (often leads to fakeouts or quick fades).
- Optional white dashed line (the "median conviction"): A smoothed version over the last few bars. If it crosses zero or diverges from price, it can signal shifting momentum.
index works the same for both bears and bulls. teal bars in the positive are above participation or conviction in both bearish and bullish participation. also allows identifying exhaustion in both bearish and bullish scenarios.
works well equally on lower TFs and higher TFs
Why use it:
It uses robust statistics (rolling median volume + Median Absolute Deviation for a "z-like" score) instead of plain averages — much better at handling noisy or outlier-heavy markets like crypto, forex, or stocks during news events. Then it adds a weighted mix of short-term volume acceleration and relative volume for better context.
Great for:
- Beginners: Start with defaults — the colors and zero line make it easy to see at a glance.
- Day/swing traders: Filter entries/exits with real participation (e.g., teal spike on support bounce = higher odds).
- Anyone learning volume: Shows clearly when moves have "muscle" vs. when they're suspect.
Quick usage tips:
- Best on 5m to 4h charts with good volume data.
- Combine with price action, levels, or your favorite tools — use VCI to confirm conviction.
- Toggle the median line in settings if your timeframe is noisy.
Defaults work well across most assets — adjust "Volume Window" for longer/shorter lookback, or "Recent Weight" to emphasize sudden changes more/less.
I personally like using it on 1min / 5min / 30min charts. Has a microscope / high-rez feel about it when I'm on quicker TFs.
Open-source under © RU55IANROUL3TT3 — feel free to study, fork, or build on it!
Feedback welcomed — what markets/timeframes does it help you with?
Pine Script®指標
Relative Valuation Oscillator [QuantAlgo]🟢 Overview
The Relative Valuation Oscillator identifies statistical price deviations from fair value using logarithmic price analysis and standard deviation bands. It calculates how far current price has deviated from its mean on a logarithmic scale, normalized by volatility, to generate a centered oscillator that highlights periods when price is statistically stretched above or below its historical average, helping traders identify potential mean reversion opportunities and extreme valuation conditions across different timeframes and markets.
🟢 How It Works
The indicator's core methodology lies in its statistical approach to price valuation, where deviations are measured using logarithmic returns and normalized by standard deviation:
log_price = math.log(close)
mean_log_price = ta.sma(log_price, lookback_period)
standard_deviation = ta.stdev(log_price, lookback_period)
valuation_score = (log_price - mean_log_price) / standard_deviation
First, the script converts price to logarithmic form to account for percentage-based price movements rather than absolute dollar changes, ensuring the indicator works consistently across different price levels and asset classes.
Then, it calculates the mean log price over the specified lookback period to establish a baseline fair value reference:
mean_log_price = ta.sma(log_price, lookback_period)
Next, standard deviation measurement quantifies the typical volatility of log price around this mean, providing a statistical framework for defining normal versus extreme price behavior:
standard_deviation = ta.stdev(log_price, lookback_period)
The valuation score is then derived by measuring how many standard deviations the current log price sits from its mean, creating a normalized oscillator that fluctuates around zero:
valuation_score = (log_price - mean_log_price) / standard_deviation
Finally, threshold-based signal detection identifies extreme conditions when the valuation score exceeds user-defined standard deviation multiples:
is_overvalued = valuation_score > threshold_mult
is_undervalued = valuation_score < -threshold_mult
This creates a statistical mean reversion system that identifies when price has deviated significantly from its historical average on a volatility-adjusted basis, providing traders with objective measurements of relative over or undervaluation.
🟢 Signal Interpretation
▶ Undervalued Zone (Below Negative Threshold): Oscillator falling below the negative threshold line indicates price has deviated significantly below its statistical mean = Potential long/buy opportunities for mean reversion strategies
▶ Overvalued Zone (Above Positive Threshold): Oscillator rising above the positive threshold line indicates price has deviated significantly above its statistical mean = Potential short/sell or profit-taking opportunities
▶ Fair Value Range (Between Thresholds): Oscillator remaining between positive and negative threshold lines indicates price is trading within normal statistical bounds. Within this range, the zero line acts as a directional filter: oscillator above zero but below the upper threshold suggests bullish trend/momentum with price trading above its statistical mean = Trend-following long positions can be maintained; oscillator below zero but above the lower threshold suggests bearish trend/momentum with price trading below its statistical mean = Trend-following short positions can be maintained. The oscillator can remain in these directional zones during sustained trends until mean reversion occurs, signaled by crosses back toward zero or transitions to the opposite extreme threshold.
▶ Zero Line Crosses: Oscillator crossing above zero indicates transition from below-average to above-average valuation, confirming shift to bullish momentum = Potential trend-following long entry; crossing below zero indicates transition from above-average to below-average valuation, confirming shift to bearish momentum = Potential trend-following short entry or long exit. These crosses can signal both the start of directional trends and early mean reversion from extreme conditions.
🟢 Features
▶ Preconfigured Presets: Three optimized parameter sets for different trading approaches and timeframes. "Default" provides balanced sensitivity for swing trading on 4-hour and daily charts, generating signals at statistically significant deviations. "Fast Response" delivers more frequent signals for intraday trading on 5-minute to 1-hour charts, reacting quickly to short-term deviations with increased signal frequency. "Smooth Trend" focuses on major extremes for position trading on daily to weekly timeframes, filtering noise to identify only the most significant statistical outliers.
▶ Built-in Alerts: Five alert conditions enable automated monitoring of valuation extremes and transitions. "Overvalued Threshold Crossed" triggers when the oscillator crosses above the positive threshold, signaling potential overvaluation. "Undervalued Threshold Crossed" activates when the oscillator crosses below the negative threshold, signaling potential undervaluation. "Crossed Above Fair Value (0)" and "Crossed Below Fair Value (0)" provide alerts for zero line transitions, indicating shifts between above-average and below-average valuation. "Any Extreme Valuation" offers a combined alert for any threshold breach regardless of direction, allowing traders to monitor both extremes with a single alert setup.
▶ Color Customization: Six visual themes (Classic, Aqua, Cosmic, Cyber, Neon, plus Custom) accommodate different chart backgrounds and visual preferences, with distinct colors for overvalued, undervalued, and fair value conditions. Optional background highlighting with adjustable transparency (0-100%) tints the main chart background during extreme valuation periods, providing immediate visual context without requiring continuous oscillator monitoring. Optional overlay signals display small circle markers directly on the price chart above bars during overvaluation and below bars during undervaluation, allowing correlation of statistical extremes with specific price levels and candlestick patterns.
Pine Script®指標
Z-Score Predictive Zones [AlgoPoint]Z-Score Predictive Zones
This indicator is an advanced evolution of the classic Z-Score (Standard Score) oscillator. Unlike traditional Z-Score indicators that use static overbought/oversold levels (e.g., +2.0 or -2.0), this script utilizes a dynamic memory system to identify where the market statistically tends to reverse based on recent history.
It provides a dual-view system: it displays the oscillator in the bottom pane and simultaneously projects those statistical extremes onto the main chart as Predictive Support and Resistance Zones.
1. Underlying Concept & Math
The core calculation is based on the Standard Score formula: Z = (Price - Mean) / Standard Deviation
- Adaptive Thresholds : The script detects pivot points (peaks and troughs) in the Z-Score history. It stores the most recent reversals (based on user-defined depth) and calculates the average level where the market has historically reversed.
- Reverse Engineering (Price Projection) : The script takes these average Z-Score reversal levels and reverse-engineers the formula to find the corresponding price on the main chart: Projected Price = Mean + (Target Z * Standard Deviation)
- Noise Reduction : The raw Z-Score is smoothed using a Volume Weighted Moving Average (VWMA) to reduce false signals.
2. Key Features
Dynamic Predictive Zones (Main Chart):
- Red Zone (Resistance) : Represents the price area where the Z-Score hits its historical average peak.
- Green Zone (Support) : Represents the price area where the Z-Score hits its historical average trough.
Note: These zones expand and contract based on market volatility (Standard Deviation).
Dual Visualization:
- Bottom Pane : Shows the Z-Score oscillator with the calculated dynamic steps.
- Main Chart : Uses force_overlay=true to draw the corresponding price channels directly on the candles, allowing for real-time price action analysis.
- RSI Gradient Coloring : The oscillator line changes color based on RSI (Relative Strength Index) values to provide additional momentum context (Purple/Blue gradients).
- Signal Dots : Plots small circles on the main chart when the price enters these extreme statistical zones, indicating a potential mean reversion opportunity.
3. How to Use
This indicator is best used for Mean Reversion strategies.
- Potential Short : When price enters the Red Zone (Upper Channel) and a red dot appears, the price is statistically overextended relative to its recent volatility profile.
- Potential Long : When price enters the Green Zone (Lower Channel) and a green dot appears, the price is statistically undervalued relative to the mean.
- Trend Warning : If the price candles close forcefully beyond these zones and the zones begin to widen rapidly, it may indicate a breakout or a strong trend initiation rather than a reversal.
4. Settings
- Z-Score Length : The lookback period for the Mean and Standard Deviation.
- Lookback Depth : How many past reversal points the script should "remember" to calculate the average zones.
- Reversal Thresholds : The minimum Z-Score value required to register a peak or trough as a valid data point.
- Visuals : Toggle signal dots on/off.
Pine Script®指標
Hidden Divergence with BB & Triple Filterthis stargies use for intraday best for structure trading and breakout and breakdown helpful for all beginer and expernices trader
Pine Script®指標
BULL-BEAR-WALLDEMPurpose and Overview
Designed for minimalistic charting, this indicator computes RSI (default 14-period on close) but hides all visuals—plots, bands, fills, and smoothing—to focus solely on divergence signals. With overlay=true, it integrates labels onto the main price chart, eliminating separate panes and scale issues. Divergences highlight momentum-price mismatches: bullish for potential upturns (e.g., weakening downtrends), bearish for downturns (e.g., fading rallies). The calculateDivergence input (default false) gates the logic, optimizing for user control and performance.
Technical Implementation
RSI Core: Employs ta.change(), ta.rma() for up/down averages, yielding rsi = 100 - (100 / (1 + up / down)).
Divergence Module: Uses ta.pivotlow()/ta.pivothigh() with fixed lookbacks (left/right: 5) and range filter (5-60 bars). Conditions: Bullish (rsiHL && priceLL), Bearish (rsiLH && priceHH), evaluated conditionally.
Rendering: plotshape() for labels (" Bull "/ " Bear ") at bar extremes (location.belowbar/abovebar), offset by -lookbackRight. Colors: green bull, red bear.
Hiding: color=na for plots/hlines; transparent color.new(..., 100) for fills. Smoothing via switch (SMA/EMA/etc.) but invisible.
Alerts: alertcondition() with pivot context messages.
The structure prioritizes readability: grouped inputs, modular functions, and no unnecessary visuals.
Usage Scenarios and Tips
Apply to trending markets—e.g., 4H BTCUSD for crypto reversals or daily TSLA for stock pullbacks. Enable divergence in settings; labels offset to pivots aid quick scans. Pair with volume or trends for confirmation; alerts enable real-time monitoring. For backtesting, adapt to strategy() using conditions as entry signals.
Customization Options
Inputs: RSI length (min 1), source, divergence toggle (hidden display).
Smoothing: Hidden group with MA types, lengths, BB multipliers.
Extensions: Expose lookbacks as input.int(); add hidden divergences or MTF via request.security().
Limitations and Considerations
Signals rely on data: No divergences mean no labels; adjust parameters for sensitivity.
Repainting possible on live bars; best on closed data.
Not standalone: Divergences (55-65% historical accuracy per studies) need context to avoid false positives in strong trends.
v6-dependent; compatible but feature-limited in v5.
Pine Script®指標
Intraday Cumulative Volume RatioThis indicator is designed to reveal the true order flow dominance from the start of the trading session. Unlike standard oscillators, it calculates the exact ratio between cumulative buying and selling volume using high-precision intrabar data.
It answers a simple question: "How many times stronger is the buying pressure compared to selling pressure (or vice versa) since the market opened?"
Key Features:
Zero-Based Ratio:
0.0 = Perfectly balanced market (1:1).
+1.0 = Buyers have 2x more volume than sellers.
+2.0 = Buyers have 3x more volume than sellers.
Negative values indicate seller dominance.
Intrabar Precision: Uses lower timeframe data (e.g., 1-minute) to look inside higher timeframe candles for accurate volume classification.
"Market Fuel" Filter: Helps identify stocks with sufficient momentum at the open. If the ratio stays low (near 0), the stock lacks the "fuel" for a sustained move.
Clamp Function: Includes a built-in limiter (default 3.0) to prevent chart distortion caused by extreme volume anomalies at the market open.
How to use:
Identify Trend Strength: Look for values above +2.0 (or below -2.0) to confirm strong directional conviction.
Filter Weak Stocks: If the indicator hovers around 0, avoid trading as there is no clear order flow advantage.
Spot Divergences: If price makes a new high but the Ratio makes a lower high, the buying pressure is fading relative to selling pressure.
Settings:
Reset Period: Default is Daily (D).
Analytical Timeframe: Set to 1 (minute) for best accuracy.
Clamp Limit: Default is 3.0 to keep the chart readable.
Pine Script®指標
Combined Trend Indicator - OPTIMIZED Combined Trend Indicator - 10 in 1 (Optimized)
This powerful trend-following indicator combines 10 proven technical indicators into one unified signal system with weighted scoring.
Included Indicators:
RMI Trend Sniper
TS ALMA Smooth
CTI (Correlation Trend Indicator)
Sebastine Trend Catcher
TS Gunxo Trend Sniper
DEMA DMI ViResearch
MM For Loop (Misinkomaster)
DMI For Loop
Trend Oscillator
Stochastic For Loop
How It Works:
Calculates bullish/bearish signals from all 10 indicators
Applies weighted scoring (trend indicators get 2x weight)
Anti-whipsaw filter requires 2-bar confirmation
Displays color-coded trend line below price
Signal Levels:
🟢 Strong Bull (Dark Green) - Difference > 4 → BUY/HOLD
🟢 Weak Bull (Light Green) - Difference 1-4 → CAUTION
🔴 Weak Bear (Light Red) - Difference -1 to -4 → REDUCE
🔴 Strong Bear (Dark Red) - Difference < -4 → SELL/EXIT
Features:
✓ Real-time score display (Bull/Bear out of 13 points)
✓ Automated alerts for trend changes
✓ Optimized parameters for crypto/Bitcoin
✓ Minimal false signals through confirmation filter
Best Used For:
Daily (1D) timeframe, Bitcoin and major cryptocurrencies. Can be adapted for other timeframes and assets.
Pine Script®指標
Cyberpunk MACD Pulse EngineDescription
The Cyberpunk MACD Pulse Engine is a high-performance trend momentum oscillator designed for the modern trader operating in high-volatility environments. It reimagines classic MACD logic through a futuristic HUD (Head-Up Display) aesthetic and is now equipped with "Tactical Mode" switching capabilities—allowing you to swap your analytical focus instantly, much like upgrading hardware in a high-tech sprawl.
Core Systems
・Four Tactical Presets: Instantly recalibrate the engine between Standard, Fast (Scalp), Slow (Swing), or Neural Spike (Hyper-reactive) to match your specific trading style.
・Pulse Histogram: Features dynamic transparency and neon-fused clarity to visualize momentum acceleration and deceleration in real-time.
・Dual-Core Lines: MACD and Signal lines are rendered with a "Neon Glow" effect for maximum visibility during intense sessions.
・System Status HUD: An integrated interface in the top-right corner that monitors current status and active Tactical Mode without cluttering your focus.
・Optimized Logic: Built on Pine Script V5 to ensure lightweight, latency-free performance.
How to Use
1. Identify the Signal: Watch for the "System Reboot" (Cyan Triangle) for bullish reversals and "System Critical" (Magenta Triangle) for bearish shifts.
2. Monitor Intensity: When the histogram glows intensely, momentum is at its peak.
3. Tactical Tip: Use Neural Spike for spotting sudden volatility spikes, and switch to Slow (Swing) to confirm if the primary higher-timeframe trend is still intact.
概要
Cyberpunk MACD Pulse Engineは、現代のトレーダーのために設計された高性能トレンド・モメンタム・オシレーターです。クラシックなMACDを近未来的なHUD（ヘッドアップディスプレイ）の美学で再構築しただけでなく、状況に応じて設定を瞬時に換装できる**「タクティカル・モード」**を新たに搭載しました。ハイテク都市のハードウェアをアップグレードするように、分析の焦点を即座に切り替えることが可能です。
主な機能
・4つのタクティカル・プリセット: Standard、Fast (スキャルピング)、Slow (スイング)、Neural Spike (超高感度反応) から、自身のトレードスタイルに合わせてエンジンを即座に再調整できます。
・パルス・ヒストグラム: ネオンが融合したクリアな視覚効果と動的な透明度変化により、モメンタムの加速と減速をリアルタイムに視覚化します。
・デュアルコア・ライン: MACDとシグナルラインに「ネオングロー」エフェクトを施し、ボラティリティの高い局面でも最高の視認性を確保。
・統合HUD: ペインの右上に、現在のトレンドステータスと選択中のモードをフィードバック表示。集中力を削ぐことなく状況を把握できます。
・最適化されたロジック: Pine Script V5をベースに、軽量な動作とラグのない描画を実現しました。
使用方法
1. シグナルの確認: 強気の反転を示す「System Reboot（シアンの三角）」と、弱気への転換を示す「System Critical（マゼンタの三角）」に注目してください。
2. 勢いの測定: ヒストグラムの発色が鮮やかになった時、トレンドの勢いが最大に達していることを示します。
3. タクティカル・チップ: 急なボラティリティを検知するにはNeural Spikeを使用し、主要なトレンドが維持されているか確認するにはSlow (Swing)に切り替えて分析を補完してください。
Pine Script®指標
RSquared (log prices)Rolling Trend R² measures the strength of trends using a rolling R² calculation on log prices. Values near 1 indicate a strong, persistent trend, while low values signal choppy or mean-reverting conditions. Includes regime highlighting, reference levels, and an info panel for quick market state identification.
Pine Script®指標
ADAPTIVE SCALP MASTERADAPTIVE SCALP MASTER (ASM)
Overview
ADAPTIVE SCALP MASTER (ASM) is a high-performance technical analysis tool specifically engineered for scalpers and day traders. It combines statistical volatility analysis with a unique time-frame adaptation engine, allowing the script to automatically recalibrate its sensitivity whether you are trading the 1-minute chart or the 4-hour trend.
The core logic is based on Z-Score Mean Reversion coupled with Zero-Lag Least Squares Moving Average (ZLSMA) for trend filtering, ensuring that you enter trades only when momentum and statistical overextension align.
Key Features
Timeframe Adaptation Engine: ASM automatically adjusts its Z-Score lengths, thresholds, and ATR multipliers based on your current chart. It tightens parameters for high-frequency scalping (M1-M5) and widens them for higher timeframes to filter out market noise.
Z-Score Mean Reversion: Utilizes statistical standard deviation to identify overbought and oversold conditions with precision.
Zero-Lag Trend Filtering: Features a customized ZLSMA to provide a smooth, reactive trend baseline without the lag of traditional MAs.
Smart Risk Management: Automatically calculates dynamic Stop Loss and Take Profit levels based on current ATR volatility.
Aggressive Scalping Mode: A specialized toggle for experienced traders that maximizes signal frequency by loosening standard confirmation filters.
How It Works
Normalization: The indicator calculates the price deviation (Z-Score).
Adaptive Thresholds: It checks if the price has reached a statistically significant extreme (Overbought/Oversold).
Multi-Stage Filtering:
Trend Filter: Signals must align with the ZLSMA direction (optional).
Volume Filter: Requires a surge in volume to confirm the move (optional).
Candle Confirmation: Requires price action to flip in the signal's direction before firing.
Execution: Once all conditions are met, the script plots entry shapes and dynamic risk levels.
Settings Guide
Aggressive Mode: Use this for fast-paced scalping on M1. It disables the trend and volume filters to capture every micro-reversal.
Base Sensitivity: Controls how far back the Z-Score looks. Default is 10. Lower values make the indicator more reactive.
Base Threshold: Standard is 1.5. Increase this value (e.g., to 2.0) if you want fewer, higher-probability signals.
Min Bars Between: Use this to prevent "signal clustering" during periods of high volatility.
User Interface
The Info Panel provides real-time data including:
Current Market Bias (Trend direction).
Live Z-Score value.
Current ATR-based volatility status.
Trade Signal confirmation status.
Pine Script®指標
B-Xtrender MTFA @XL-DurexOriginally Created by @puppytherapy and found at this link: B-Xtrender by Quant Therapy
This version removes everything apart from the histograms and adds multi time frame analysis.
Defaults are 1D, 1W, 1M.
Pine Script®指標
VIX-Market Stress & Volatility OscillatorVIXATA is a specialized sentiment tool designed to transform raw VIX data into a structured oscillator. By using fixed threshold levels, it identifies specific zones of market "complacency" and "extreme panic," helping traders spot potential market reversals with higher precision.
Technical Logic & Levels
Unlike standard VIX charts, VIXATA focuses on key psychological and technical levels to categorize market stress:
Level 20 (Green Dashed Line): The "Confidence Zone." Indicates a stable market where risk appetite is generally high.
Level 25-30 (Yellow/Orange Zones): The "Caution Zone." Volatility is rising, suggesting that the market is becoming unsettled.
Level 30 (Red Solid Line): The "High Stress" threshold. Historically, when VIXATA crosses this line, market fear is significant.
Level 40+ (Purple Solid Line): The "Extreme Panic" zone. These peaks often correlate with major price capitulations and long-term bottoming signals.
Pine Script®指標
Pine Script®指標
ronyImran Rony is an advanced based binary trading indicator designed to deliver high-accuracy CALL & PUT signals on short timeframes.
It uses RSI volatility with TMA deviation channels to identify overbought and oversold market conditions, while the optional EMA Trend Force filter helps avoid counter-trend trades and improves overall signal quality.
All signals are non-repainting and confirmed after candle close.
The indicator also features a real-time performance dashboard displaying Win Rate, total Wins & Losses, current Trend direction, and active signal status, allowing traders to monitor performance directly on the chart.
Best suited for Binary Options trading on 1M–5M timeframes, including OTC and Forex pairs.
⚠️ This indicator is for technical analysis only. Always use proper risk management.
This Code Made by Imran Rony
Telegram : @Imran_755
Pine Script®指標
Aroon🎯Overview
Aroon → is a beautifully visualized trend detection indicator that measures the strength and direction of market trends using the Aroon oscillator. It provides clear signals for identifying trend beginnings, strength, and potential reversals.
Key Features
📊 Dual Component Analysis
Aroon Up: Measures time since highest high within the specified period
Aroon Down: Measures time since lowest low within the specified period
Aroon Average: The difference between Aroon Up and Aroon Down (oscillator)
🎨 Customizable Visualization
5 Color Themes: Choose from Classic, Modern, Robust, Accented, or Monochrome
Visual Fill Areas: Color-coded overbought/oversold zones
Clear Labels: Direct labeling of both Aroon lines for easy reading
📈 Trend Detection System
Cross Signals: Bullish when Aroon Up crosses above Aroon Down
Bearish Signals: Bearish when Aroon Up crosses below Aroon Down
Trend Strength: The spread between lines indicates trend strength
How It Works
Indicator Logic
Aroon Up = × 100
Aroon Down = × 100
Aroon Average = Aroon Up - Aroon Down (oscillator between -100 and +100)
Trend Signals: Generated when the two lines cross
Interpretation Guidelines
Strong Uptrend: Aroon Up near 100, Aroon Down near 0
Strong Downtrend: Aroon Down near 100, Aroon Up near 0
Consolidation: Both lines moving together below 50
Trend Beginning: Lines diverging after being close together
Trend Reversal: Lines crossing each other
Display Options
Visual Components
Aroon Lines (optional): Show individual Up/Down lines
Aroon Average (optional): Show the oscillator with fill zones
Background Highlights: Color background on crossover signals
Summary Table: Large text showing current trend direction
Color Themes
Classic: Green/Red (traditional)
Modern: Teal/Purple (contemporary)
Robust: Gold/Burgundy (bold)
Accented: Purple/Pink (vibrant)
Monochrome: Gray/Charcoal (subdued)
Trading Applications
Entry Signals
Long Entry: Aroon Up crosses above Aroon Down
Short Entry: Aroon Up crosses below Aroon Down
Trend Confirmation: Use with price action for validation
Trend Analysis
Trend Strength: Distance between lines indicates momentum
Trend Maturity: Line levels show how old the trend is
Range Identification: Both lines low indicates consolidation
Customization Settings
Aroon Configuration
Length: Default 6 periods (adjustable)
Show Lines: Toggle Aroon Up/Down lines
Show Average: Toggle Aroon oscillator display
Color Theme: Choose from 5 visual styles
Alert System
Cross Alerts: Notifications for bullish/bearish crossovers
Custom Messages: Includes ticker symbol in alert messages
Benefits for Traders
📊 Clear Trend Identification
Visual representation of trend strength and direction
Easy-to-spot crossovers for potential entries
Multiple display options for different trading styles
🎯 Versatile Application
Works on all timeframes
Suitable for all markets (stocks, forex, crypto)
Can be combined with other indicators for confirmation
⚡ Practical Features
Real-time alerts for crossovers
Clean, uncluttered visualization
Customizable to match your chart aesthetics
Large trend direction display for quick assessment
Perfect for trend-following traders who want a clear, visual indicator that identifies both trend direction and strength without complex calculations. The Aroon indicator is particularly effective at spotting new trends early and identifying when trends are weakening or reversing.
Pine Script®指標
1D % Change (Histogram)1D % Change Histogram (Daily-Anchored)
Description
This indicator plots the 1-day percent change as a histogram above/below the zero line.
It includes 3 calculation modes:
• Last vs Prev Close: compares the latest available price to the prior daily close (useful for an “in-progress” daily change on intraday charts).
• Close vs Prev Close: classic daily close-to-close change (stable per day).
• Close vs Open: session move for the day (open-to-close).
The logic is anchored to the Daily timeframe, so you can view it on 5m/15m/1H charts while keeping a consistent “1D” reference.
How to use:
• Want a live-updating read on intraday charts? Use Last vs Prev Close.
• Want clean day-by-day comparisons? Use Close vs Prev Close.
• Want a session “push” metric? Use Close vs Open.
Notes
• Green bars when value is ≥ 0, red bars when < 0.
• Optional zero line and last-value tag.
• Can run on the chart symbol or a user-selected symbol.
Limitations
• Different data feeds may define “price” differently (last/close/settle), so values can vary across providers.
• In Last vs Prev Close mode the value updates intraday (expected behavior).
Disclaimer
This script is for educational and informational purposes only.
It is not financial advice and does not provide buy/sell signals or entry/exit recommendations.
Use at your own risk and always verify with your own data.
Pine Script®指標
For Loop THMA ~ CharonQuantThe For Loop THMA is a trend classification and momentum confirmation indicator designed to measure directional strength through relative price dominance, not raw crossings.
This indicator blends a Triple Hull Moving Average structure with a for-loop comparison engine and multiple trend quality filters to reduce noise and false signals.
Concept Overview
The core idea behind this indicator is simple:
Instead of asking “did price cross a line?”, it asks
“How often is the price stronger than its recent past?”
By looping over previous THMA values and comparing them to the current value, the indicator builds a directional score that reflects internal momentum and persistence.
This approach allows trends to be evaluated statistically rather than emotionally.
Indicator Components
The For Loop THMA is composed of four layers:
• Triple Hull Moving Average (THMA) as the smoothed price backbone
• For-loop counter to quantify relative dominance over a lookback window
• EMA trend filter to align signals with higher-timeframe bias
• ADX + DMI filter to ensure sufficient trend strength
Signals are only produced when all components align.
For-Loop Logic
The for-loop compares the current THMA value to its past values over a user-defined range.
Each comparison increments or decrements a counter, producing an oscillator that reflects bullish or bearish pressure.
Optional weighting can be enabled to give more importance to recent price action.
This counter becomes the primary decision engine of the indicator.
Visual Interpretation
• The oscillator displays the strength and direction of the trend
• Threshold lines define bullish and bearish regimes
• Bar coloring reflects the active trend state
• Color intensity adapts to directional confidence
Credits and Inspiration
This indicator is inspired by and builds upon:
• THMA ~ CharonQuant
• For Loop MA Indicator from CraftMan18
Development and usage notes:
You must tweak the parameters to fit your market, timeframe, and trading style.
If you do not read this description or do not understand what the indicator is designed to do, do not use it.
Indicators amplify both discipline and mistakes.
Important reminder: No single indicator is sufficient on its own.
Pine Script®指標
Forecast Trend Filter ~ CharonQuantThe Forecast Trend Filter (FTF) is a trend and momentum confirmation indicator built on the original Forecast Oscillator concept developed by Tushar Chande.
The original Forecast Oscillator measures how far price deviates from a linear regression forecast to highlight momentum shifts.
This version extends that foundation and restructures it into a practical, signal-quality focused trend filter designed for real trading conditions.
What’s different in this implementation:
• Forecast Oscillator combined with slope confirmation to ensure momentum is accelerating, not stalling
• Trend alignment filter using a user-selectable moving average (SMA, EMA, WMA, HMA, ALMA, VWMA)
• Minimum deviation threshold to filter out weak or noisy signals
• Directional state logic that clearly defines bullish, bearish, or neutral conditions
• Visual trend context using adaptive colors, background bias, and overlay plots
Signals are only generated when all conditions align:
• Price deviates meaningfully from its linear regression forecast
• Oscillator slope confirms momentum continuation
• Deviation exceeds the minimum quality threshold
• Price is aligned with the higher-level trend filter
If one condition fails, the signal is ignored.
This design prioritizes signal quality over signal frequency.
Development and usage notes:
This indicator was developed and calibrated on the 1D INDEX:ETHUSD chart.
You must tweak the parameters to fit your market, timeframe, and trading style.
If you do not read this description or do not understand what the indicator is designed to do, do not use it.
Indicators amplify both discipline and mistakes.
Important reminder: No single indicator is sufficient on its own.
Pine Script®指標
BB% of RSI + MFIThis indicator is a modified version of LazyBear’s BB% of RSI.
It plots RSI with Bollinger Bands applied to the RSI itself, highlighting volatility extremes.
A Money Flow Index (MFI) line is added for visual comparison only.
The original RSI and Bollinger Band logic remains unchanged.
MFI can be toggled ON/OFF from the settings.
Useful for identifying overbought/oversold conditions and momentum shifts.
Pine Script®指標
RSI Exhaustion Gate (Visual Flip)An RSI-based indicator that highlights potential overbought and oversold exhaustion points with visual dots. Provides clear signals when RSI reaches extreme levels and flips, helping traders identify short-term reversal opportunities. Includes customizable colors, RSI levels, and alerts for both long and short exhaustion triggers.
Detailed Description (for Publishing):
RSI Exhaustion Gate (Visual Flip) is designed to help traders identify potential overbought and oversold exhaustion levels on any timeframe.
Key Features:
Plots RSI with standard overbought (70) and oversold (30) levels.
Visually flipped exhaustion dots appear when RSI crosses into extreme zones and reverses, signaling potential trade entries.
Customizable colors for overbought and oversold dots.
Option to toggle visibility of RSI levels and dots.
Alerts for both long and short exhaustion points, so you can set TradingView notifications.
Works on any chart timeframe.
This tool is intended as a visual guide for spotting RSI-based exhaustion signals and can be used in conjunction with your trading strategy for improved timing and clarity.
Pine Script®指標
Momentum - MOM🎯 Overview
This is an advanced Momentum - MOM indicator that measures absolute price change over time, combined with dynamic moving average filtering. Unlike basic MOM implementations, this version features gradient momentum zones, multiple color themes, and a clear signal dashboard for precise price momentum identification.
🧩 Core Components
1. ⚙️ Technical Foundation
📊 Primary Calculation: Uses TradingView's built-in ta.mom() function which calculates absolute price difference between current price and price N periods ago
📈 Dual Analysis Components:
MOM Line: Absolute price change oscillator (unbounded range based on price)
MA Filter: Customizable moving average acting as momentum baseline
Momentum Zones: Gradient fills for strong positive and negative momentum extremes
⚡ Absolute Change Measurement: Unique ability to quantify the actual price movement in points/currency units
2. 🎛️ Configuration Parameters
📏 MOM Length: Default 14 periods (standard momentum setting)
🔄 MA Filter Settings:
Length: Customizable (default 365 periods)
Type: 6 options available (EMA, SMA, RMA, WMA, VWMA, HMA)
🎨 Color Themes: 5 visual schemes consistent with your indicator suite:
Classic, Modern, Robust, Accented, Monochrome
📊 Signal Interpretation:
🟢 BULLISH: MOM > MA Filter (price momentum above baseline)
🔴 BEARISH: MOM < MA Filter (price momentum below baseline)
🚀 STRONG BULLISH: (extreme positive momentum)
📉 STRONG BEARISH: (extreme negative momentum)
3. 🎨 Visual Elements
🚨 Gradient Zones:
Strong Bullish zone : Green gradient intensifying toward higher values
Strong Bearish zone : Red gradient intensifying toward lower values
📋 Dashboard Display: Top-right status indicator showing "⬆️ Bullish" or "⬇️ Bearish"
📊 Dynamic Coloring: MOM line changes color based on position relative to MA
⚡ Midline Reference: Subtle 50-level reference line for scale orientation
⚡ Trading Applications
📈 Primary Uses:
🎯 Absolute Momentum Measurement:
MOM > MA = Bullish price momentum
MOM < MA = Bearish price momentum
MOM = 0 = No net price change over period
💪 Momentum Strength in Price Terms:
Shows actual points/currency gained or lost
Useful for position sizing and risk management
More intuitive than percentages for some traders
🚨 Extreme Momentum Signals:
Extreme Bullish: (major price appreciation)
Extreme Bearish: (major price depreciation)
📊 Zone Analysis:
🟢 Strong Bullish Zone :
Green gradient fills
Indicates substantial price gains over the period
Often signals strong trend continuation or potential exhaustion
🔴 Strong Bearish Zone :
Red gradient fills
Indicates substantial price losses over the period
Often signals strong downtrend or potential reversal
🟡 Equilibrium: Yellow MA line acts as momentum baseline filter
🎨 Customization Options
👁️ Display Features:
📊 Dual Components: Always shows both MOM line and MA filter
🎨 Gradient Visualization: Automatic fill for extreme momentum conditions
📋 Status Dashboard: Clear bullish/bearish momentum indication
📈 Customizable MA: Choose from 6 different moving average types
📏 Wide Dynamic Range: ±15,000 levels accommodate various asset price ranges
🎨 Visual Themes: (Consistent suite)
🎨 Classic: Green/Red (traditional momentum colors)
🚀 Modern: Cyan/Purple (contemporary)
💪 Robust: Amber/Deep Purple (high contrast)
🌈 Accented: Purple/Magenta (vibrant)
⚫⚪ Monochrome: Light Gray/Dark Gray (minimalist)
🔔 Alert System
🟢 LONG Alert: Triggers when MOM crosses above MA
🔴 SHORT Alert: Triggers when MOM crosses below MA
📧 Format: Includes ticker symbol for tracking
⚡ Key Advantages
✅ Strengths:
🎯 Price-Based Analysis: Measures actual price movement in understandable units
💪 Absolute Value Interpretation: Shows exact points gained/lost over period
👁️ Clear Trend Momentum: MA filter separates noise from meaningful momentum
🔄 Flexible Across Assets: Works equally well with stocks, crypto, forex, etc.
📊 Professional Dashboard: Immediate momentum status recognition
📊 Optimal Settings:
⚡ Short-term Trading: MOM Length 10-14, MA Length 20-50
📊 Medium-term Trading: MOM Length 14-20, MA Length 50-100
📈 Long-term Trading: MOM Length 20-30, MA Length 100-365
🏆 Unique Features:
🎯 Absolute Price Measurement: Shows exact price change, not percentages
📊 Extreme Thresholds: ±15,000 levels for major momentum identification
🎨 Consistent Design: Matches your indicator family aesthetics
📋 Momentum Dashboard: Quick visual confirmation of price momentum
🔧 Direct Price Analysis: No conversion needed - shows actual market movement
🔄 Trading Strategies
1. Price Momentum Strategy:
Go LONG when MOM crosses above MA with positive values
Go SHORT when MOM crosses below MA with negative values
Strong signals when MA crossover aligns with extreme zones
2. Momentum Divergence:
Price makes higher high, MOM makes lower high → Bearish divergence (momentum weakening)
Price makes lower low, MOM makes higher low → Bullish divergence (selling pressure decreasing)
3. Trend Strength Assessment:
Large positive MOM values = Strong uptrend momentum
Large negative MOM values = Strong downtrend momentum
MOM near zero = Consolidation or trend change
📈 Performance Tips
Asset-Specific Thresholds: Adjust ±15,000 levels based on typical price ranges
Zero Line Significance: MOM crossing zero often precedes trend changes
Extreme Readings: Very high/low MOM values may indicate exhaustion moves
Multiple Timeframes: Compare MOM values across timeframes for confirmation
Combine with Volume: Add volume analysis to confirm momentum moves
This enhanced Momentum indicator provides professional-grade price-based momentum analysis with intuitive visualization, allowing traders to measure exact price movements, identify momentum trends in absolute terms, and filter signals through the customizable moving average for precise momentum-based trading decisions! 📊📈
Pine Script®指標
