立即開始

震盪指標

W%R Positioning of this %R setup Three lines, three roles Len3 = 42 (slow): defines the environment/direction (trend or range). Len2 = 25 (medium): filtering/confirmation. Len1 = 10 (fast): timing/trigger. Value range: 0 to −100; the closer to 0, the stronger / more overbought; the closer to −100, the weaker / more oversold. Reference levels: −20 (upper band) / −50 (midline) / −80 (lower band). Top-right panel: displays the current values and states (overbought / neutral / oversold) for all three lines. 这套 %R 的定位 三根线各司其职 Len3=42（慢）：定环境/方向（趋势或震荡）。 Len2=25（中）：做过滤/确认。 Len1=10（快）：做择时/触发。 读数区间：0 到 -100；越靠近 0 越“强/易超买”，越靠近 -100 越“弱/易超卖”。 三条参考线：-20（上轨）／-50（中线）／-80（下轨）。 右上角表格直接给出三条线的当前值与状态（超买/中性/超卖）。
Pine Script®指標
由Trader_ZENG提供
Relative Performance vs BTC/ETH# 📌 Indicator: Relative Performance vs BTC & ETH (Simplified) This indicator compares the **relative performance** of the current coin against **BTC** and **ETH**, normalizing values at the first visible bar. It helps traders quickly identify whether a coin is **outperforming or underperforming** the two main crypto benchmarks. - 🟠 **Orange line (vs BTC)** → performance relative to Bitcoin - 🟣 **Purple line (vs ETH)** → performance relative to Ethereum --- ## 🔍 How to read it - If the **vs BTC line rises** → the coin is outperforming BTC - If the **vs ETH line rises** → the coin is outperforming ETH - If the lines **fall** → the coin is underperforming that benchmark - If the two lines **intersect** → performance is equal vs BTC and ETH, possibly signaling a **shift in market leadership** --- ## 🎯 Practical use cases - Compare the strength of any coin against both BTC and ETH in one chart - Spot moments when the coin shifts correlation (following BTC vs ETH) - Identify potential **rotation signals** in the crypto market (investor preference between BTC and ETH)
Pine Script®指標
由ImMrToreda提供
Order/Breaker Blocks + RSIThis indicator visualizes bullish and bearish order/breaker blocks on the chart and provides entry signals for long and short trades based on RSI and price position relative to the blocks. It features candle highlighting: white when RSI > 70, yellow when RSI < 30 (can be enabled/disabled in the settings). The indicator helps you spot key supply/demand zones and market polarity shifts. Automatic detection and display of order/breaker blocks. Long/short signals based on RSI and block position. Flexible settings for block display and candle highlighting. Historical polarity change markers. Useful for visual analysis and finding entry/exit points using the Order Block + RSI strategy. Индикатор отображает бычьи и медвежьи блоки (Order/Breaker Blocks) на графике, а также сигнальные стрелки для входа в лонг и шорт на основе RSI и положения цены относительно блоков. Встроена функция подсветки свечей: белый цвет при RSI > 70, жёлтый — при RSI < 30 (можно включить/отключить в настройках). Индикатор помогает визуализировать ключевые зоны спроса/предложения и моменты смены рыночной динамики. Автоматическое определение и отображение блоков. Сигналы для лонга и шорта с учётом RSI. Гибкая настройка отображения блоков и подсветки свечей. Поддержка исторических меток смены полярности. Подходит для визуального анализа и поиска точек входа/выхода по стратегии Order Block + RSI.
Pine Script®指標
由aur-ora提供
RSI, CCI, ADX Panel (Custom TF for Each)RSI, CCI, ADX Panel (Custom TF for Each) This indicator combines RSI, CCI, and ADX into a single panel, allowing traders to view three key momentum/trend signals together. Each indicator can be calculated on its own custom timeframe, making it useful for multi-timeframe analysis. Features: RSI (Relative Strength Index): Measures momentum, useful for identifying overbought/oversold conditions. CCI (Commodity Channel Index): Detects cyclical movements and potential reversals. ADX (Average Directional Index): Evaluates trend strength without regard to direction. Independent timeframe selection for RSI, CCI, and ADX. Distinct colors for each indicator (RSI = Blue, CCI = Orange, ADX = Purple). Single consolidated panel for compact analysis. This tool is designed to give a multi-perspective view of market strength, momentum, and trend in one place.
Pine Script®指標
由drashtayoga11提供
EMAs CrossoverThis Pine Script strategy identifies bullish and bearish crossovers among four EMAs (5, 13, 26, and 50 periods) with an additional alignment condition for the EMAs. It can generate alert when: Bullish Condition: An EMA crossover occurs (5 crossing over 13, 13 over 26, or 26 over 50), and all the shorter-period EMAs are above the longer-period EMAs, indicating a strong upward trend. Bearish Condition: An EMA crossunder happens (5 crossing under 13, 13 under 26, or 26 under 50), and all shorter EMAs are below the longer EMAs, suggesting a strong downward trend. The strategy uses these conditions to enter long positions on bullish signals and short positions on bearish signals.
Pine Script®指標
由gvm4提供
Becak I-series: Indicator Floating Panels v.80Becak I-series: Floating Panels v.80th (Indonesia Independence Days) What it does: This indicator creates three floating overlay panels that display MACD, RSI, and Stochastic oscillators directly on your price chart. Unlike traditional separate panes, these panels hover over your chart with customizable positioning and transparency, providing a clean, space-efficient way to monitor multiple technical indicators simultaneously. When to use: When you need to monitor momentum, trend strength, and overbought/oversold conditions without cluttering your workspace Perfect for traders who want quick visual access to multiple oscillators while maintaining focus on price action Ideal for any timeframe and asset class (stocks, crypto, forex, commodities) How it works: The script calculates standard MACD (12,26,9), RSI (14), and Stochastic (14,3,3) values, then renders them as floating panels with: MACD Panel: Shows MACD line (blue), Signal line (orange), and histogram (green/red bars) RSI Panel: Displays RSI line (purple) with overbought (70) and oversold (30) reference levels Stochastic Panel: Shows %K (blue) and %D (orange) lines with optional buy/sell signals and highlighted overbought/oversold zones Customization options: Position: Choose Top, Bottom, or Auto-Center placement Size: Adjust panel height (15-35% of chart) and spacing between panels Positioning: Fine-tune vertical center offset and horizontal positioning Appearance: Toggle panel backgrounds and adjust transparency (50-95%) Parameters: Modify all indicator lengths and overbought/oversold levels Signals: Enable/disable Stochastic crossover signals Display: Control lookback period (30-100 bars) and right margin spacing Universal compatibility: Works seamlessly across all asset types with automatic range detection and scaling. DIRGAHAYU HARI KEMERDEKAAN KE 80 - INDONESIA ... MERDEKA!!!!!
Pine Script®指標
由kromut76提供
5
RSI Bands With RSI - ATR Trend LineRSI Bands With RSI - ATR Trend Line (Smoothed Baseline) Overview A trend-following tool that fuses RSI-based regime detection with a smoothed baseline and ATR bands. Trend line aims to stay with the RSI move, cut random noise, and flip cleanly. The line draws green in bulls and red in bears; signals fire only on candle close confirmed flips. Key Features ✅ Dynamic Trend Detection RSI (>50 / <50) sets bullish/bearish regime Smoothed baseline adapts to price while damping whipsaw ATR-based bands expand/contract with volatility ✅ Precise Signal Generation Buy when trend flips to bullish (close confirms above the upper band) Sell when trend flips to bearish (close confirms below the lower band) Flips require a real band break → fewer false transitions ✅ Visual Clarity Green line = bullish trend, Red line = bearish trend ✅ Customizable Settings RSI Length (default 14) Baseline Smoothing (default 26) ATR Length (default 14) ATR Multiplier (default 1.4) Toggles for Signals and Labels ✅ TradingView Alerts Built-in Buy & Sell alerts (recommend Once per bar close) How It Works Algorithm Logic RSI Regime: RSI above/below 50 sets bull/bear. At exactly 50, the prior target is carried forward. Target & Smoothing: A per-bar target is built from the bar’s range and RSI, then smoothed with an EMA-style filter (Baseline Smoothing) to form the baseline. ATR Bands: Upper/Lower = baseline ± (ATR × Multiplier). Flip Rule (Supertrend-like): Close above upper band → bullish flip; trend line tracks the lower band (green). Close below lower band → bearish flip; trend line tracks the upper band (red). Between bands → prior trend line persists. Signals/Alerts: A flip event generates a Buy/Sell signal and alert. Best Use Cases Trending Markets – Built to ride sustained moves in either direction. Multiple Timeframes – Works from intraday to higher TFs; higher TFs usually produce cleaner flips. Various Asset Classes – Forex, Indices, Stocks, Crypto, Commodities; ATR adapts to volatility. Recommended Settings Conservative (Lower Frequency) RSI 14–20 • Baseline 34 • ATR 14–21 • Multiplier 1.8–2.2 Use for swing/position trading; calmer signal stream. Balanced (Default) RSI 14 • Baseline 26 • ATR 14 • Multiplier 1.4 Good general-purpose setup for swing or active intraday. Aggressive (Higher Frequency) RSI 10–14 • Baseline 13–21 • ATR 10–14 • Multiplier 1.1–1.3 For scalping/day trading; earlier but noisier flips. 🎨 Visual Elements RSI Smooth baseline (soft blue) Upper/Lower ATR Bands (faint blue) Trend Line (Bull/Bear) drawn only in the active regime (green/red) Optional Buy/Sell arrows and labels ⚠️ Important Notes Signals on Close Flips confirm on bar close. Intrabar crosses can revert; wait for confirmation. Risk Management Size positions appropriately; many traders trail beyond the opposite band/line. Factor in spread, slippage, sessions, and news. Confirmation & Testing Combine with structure/volume/HTF bias if desired. Backtest and forward-test per instrument and timeframe. For research/education only; not financial advice.
Pine Script®指標
由qoulynn提供
Currency Strength v3.0Currency Strength v3.0 Summary The Currency Strength indicator is a powerful tool designed to gauge the relative strength of major and emerging market currencies. By plotting the True Strength Index (TSI) of various currency indices, it provides a clear visual representation of which currencies are gaining momentum and which are losing it. This indicator automatically detects the currency pair on your chart and highlights the corresponding strength lines, simplifying analysis and helping you quickly identify potential trading opportunities based on currency dynamics. Key Features Comprehensive Currency Analysis: Tracks the strength of 19 currencies, including major pairs and several emerging market currencies. Automatic Pair Detection: Intelligently identifies the base and quote currency of the active chart, automatically highlighting the relevant strength lines. Dynamic Coloring: The base currency is consistently colored blue, and the quote currency is colored gold, making it easy to distinguish between the two at a glance. Non-Repainting TSI Calculation: Uses the True Strength Index (TSI) for smooth and reliable momentum readings that do not repaint. Customizable Settings: Allows for adjustment of the fast and slow periods for the TSI calculation to fit your specific trading style. Clean Interface: Features a minimalist legend table that only displays the currencies relevant to your current chart, keeping your workspace uncluttered. How It Works The indicator pulls data from major currency indices (like DXY for the US Dollar and EXY for the Euro). For currencies that don't have a dedicated index, it uses their USD pair (e.g., USDCNY) and inverts the calculation to derive the currency's strength relative to the dollar. It then applies the True Strength Index (TSI) to this data. The TSI is a momentum oscillator that is less volatile than other oscillators, providing a more reliable measure of strength. The resulting values are plotted on the chart, allowing you to see how different currencies are performing against each other in real-time. How to Use Trend Confirmation: When the base currency's line is rising and above the zero line, and the quote currency's line is falling, it can confirm a bullish trend for the pair. The opposite would suggest a bearish trend. Identifying Divergences: Look for divergences between the currency strength lines and the price action of the pair. For example, if the price is making higher highs but the base currency's strength is making lower highs, it could signal a potential reversal. Crossovers: A crossover of the base and quote currency lines can signal a shift in momentum. A bullish signal occurs when the base currency line crosses above the quote currency line. A bearish signal occurs when it crosses below. Overbought/Oversold Levels: The horizontal dashed lines at 0.5 and -0.5 can be used as general guides for overbought and oversold conditions, respectively. Strength moving beyond these levels may indicate an unsustainable move that is due for a correction. Settings Fast Period: The short-term period for the TSI calculation. Default is 7. Slow Period: The long-term period for the TSI calculation. Default is 15. Index Source: The price source used for the calculations (e.g., Close, Open). Default is Close. Base Currency Color: The color for the base currency line. Default is Royal Blue. Quote Currency Color: The color for the quote currency line. Default is Goldenrod. Disclaimer This indicator is intended for educational and analytical purposes only. It is not financial advice. Trading involves substantial risk, and past performance is not indicative of future results. Always conduct your own research and risk management before making any trading decisions.
Pine Script®指標
由DOSALGO提供
8
SatoshiMultiFrame RSI SatoshiMultiFrame 📈 SatoshiMultiFrame is an advanced, multi-timeframe version of the RSI indicator, designed to look and feel like the built-in TradingView RSI — but with more customization options and professional visual enhancements. 🎯 Features Multi-Timeframe (MTF) Support – choose any timeframe for RSI calculation. Customizable RSI Line – change color, thickness, and style (Solid / Dashed / Dotted). Editable 30 / 50 / 70 Bands – fully customizable in the Style tab. Smooth Gradient Fill for OB/OS Zones: 🟢 Green shading above Overbought (70) 🔴 Red shading below Oversold (30) Customizable background for the entire panel. No repainting – stable and reliable data. ⚙️ Inputs RSI Length – default 14. Source – select the price source (Close, Open, etc.). RSI Timeframe – pick a higher or lower timeframe. RSI Line Style – choose between Solid / Dashed / Dotted. Dash Period & Dash Length – adjust the look of dashed lines. 🎨 Style Tab : Change RSI line color, thickness, and optional MA line. Edit colors and styles of 30 / 50 / 70 bands. Enable/disable and recolor OB/OS gradient fills. Adjust background color and transparency. 📌 How to Use : Add the indicator to your chart. In Inputs, set your preferred timeframe, RSI length, and line style. In Style, adjust colors, thickness, and gradient effects to your preference. Use the 50 line as a trend reference and monitor RSI behavior in OB/OS zones. ⚠️ Disclaimer: This tool is for educational purposes only and should not be considered financial advice. Always practice proper risk management.
Pine Script®指標
由SatoshiMultiframe提供
Jitendra: MTF AIO Technical Indicators with Trend ▲▼Jitendra: MTF AIO Technical Indicators with Trend ▲▼ Why We Designed this Indicator we build this indicator to Analysis Multi-timeframe Technical Data in dashboard to get Better and Quick Data in which Time Frame where it is in Momentum or in Swing, By combining multiple technical indicators with trend direction arrows and displaying them in a customizable table. It also optionally plots some indicators EMA, VWAP, Supertrend, Bollinger Bands on the chart. Traders who want a compact technical summary across multiple timeframes without switching charts. Quickly assess trend strength, momentum, divergence, volume pressure in one glance. Combine with price action to make higher-confidence entries/exits. How to Use This Indicator In setting there are Two parts First Part - for Plot Multi EMA, Bollinger Band, Supertrend 10,2 & 10, 3 factorial Second Part- To get Data on Table for Quick Analysis Chart Plots With Enable Disable Toggle in Setting VWAP (optional) 4 EMAs (lengths configurable) Bollinger Bands (optional) Two separate Supertrend indicators with custom ATR period and multiplier Indicators Data in Table For each selected timeframe: VWAP position (price above/below) MACD value + trend arrow MACD Histogram (optional) RSI value + arrow (rising/falling) ADX value + arrow (strength rising/falling) +DI / -DI values + trend arrows RSI Divergence detection (regular + hidden) EMA levels (up/down relative to price) EMA crossover (EMA1 vs EMA2 arrow) Stochastic %K Volume Matrix: Raw volume 20 SMA volume Volume % change from SMA Multi-Timeframe Support Current timeframe + up to 5 user-defined timeframes (e.g., 1H, 4H, Daily, Weekly, Monthly) Customizable Toggles Enable/disable any indicator Choose which EMAs to show Show/hide trend arrows Choose which volume metrics to display Choose table position (top_left, top_right, etc.) Choose table text size Trend Arrows & Colors Green ▲ = bullish / rising trend Red ▼ = bearish / falling trend Gray – = neutral/no change Background colors indicate overbought/oversold, trend strength, or volume surge. Indicator Data Fetch PINE CODE Short Summary request.security() → pulls data from the selected timeframe (tf). Each indicator’s calculation can be wrapped inside request.security() so the values are computed on that timeframe. //@version=5 // === 1. VWAP === vwap_htf = request.security(syminfo.tickerid, tf, ta.vwap) // === 2. MACD === macd_src = request.security(syminfo.tickerid, tf, close) macd_val = ta.ema(macd_src, 12) - ta.ema(macd_src, 26) macd_sig = ta.ema(macd_val, 9) macd_hist = macd_val - macd_sig // === 3. RSI === rsi_htf = request.security(syminfo.tickerid, tf, ta.rsi(close, 14)) // === 4. ADX & DI === adx_htf = request.security(syminfo.tickerid, tf, ta.adx(14)) plusDI = request.security(syminfo.tickerid, tf, ta.plus_di(14)) minusDI = request.security(syminfo.tickerid, tf, ta.minus_di(14)) // === 5. Supertrend === = request.security(syminfo.tickerid, tf, ta.supertrend(3, 7)) // === 6. Bollinger Bands === basis = ta.sma(close, 20) dev = ta.stdev(close, 20) bb_up = request.security(syminfo.tickerid, tf, basis + dev * 2) bb_low = request.security(syminfo.tickerid, tf, basis - dev * 2) // === 7. Stochastic === k = ta.sma(ta.stoch(close, high, low, 14), 3) d = ta.sma(k, 3) stochK = request.security(syminfo.tickerid, tf, k) stochD = request.security(syminfo.tickerid, tf, d) // === 8. EMA === ema20 = request.security(syminfo.tickerid, tf, ta.ema(close, 20)) ema50 = request.security(syminfo.tickerid, tf, ta.ema(close, 50)) // === 9. Historical Volatility (HV) === logReturns = math.log(close / close ) hv = request.security(syminfo.tickerid, tf, ta.stdev(logReturns, 20) * math.sqrt(252)) plot(vwap_htf, "VWAP") plot(macd_val, "MACD", color=color.blue) plot(rsi_htf, "RSI", color=color.purple)
Pine Script®指標
由radhe396提供
Correlation Heatmap Matrix [TradingFinder] 20 Assets Variable🔵 Introduction Correlation is one of the most important statistical and analytical metrics in financial markets, data mining, and data science. It measures the strength and direction of the relationship between two variables. The correlation coefficient always ranges between +1 and -1 : a perfect positive correlation (+1) means that two assets or currency pairs move together in the same direction and at a constant ratio, a correlation of zero (0) indicates no clear linear relationship, and a perfect negative correlation (-1) means they move in exactly opposite directions. While the Pearson Correlation Coefficient is the most common method for calculation, other statistical methods like Spearman and Kendall are also used depending on the context. In financial market analysis, correlation is a key tool for Forex, the Stock Market, and the Cryptocurrency Market because it allows traders to assess the price relationship between currency pairs, stocks, or coins. For example, in Forex, EUR/USD and GBP/USD often have a high positive correlation; in stocks, companies from the same sector such as Apple and Microsoft tend to move similarly; and in crypto, most altcoins show a strong positive correlation with Bitcoin. Using a Correlation Heatmap in these markets visually displays the strength and direction of these relationships, helping traders make more accurate decisions for risk management and strategy optimization. 🟣 Correlation in Financial Markets In finance, correlation refers to measuring how closely two assets move together over time. These assets can be stocks, currency pairs, commodities, indices, or cryptocurrencies. The main goal of correlation analysis in trading is to understand these movement patterns and use them for risk management, trend forecasting, and developing trading strategies. 🟣 Correlation Heatmap A correlation heatmap is a visual tool that presents the correlation between multiple assets in a color-coded table. Each cell shows the correlation coefficient between two assets, with colors indicating its strength and direction. Warm colors (such as red or orange) represent strong negative correlation, cool colors (such as blue or cyan) represent strong positive correlation, and mid-range tones (such as yellow or green) indicate correlations that are close to neutral. 🟣 Practical Applications in Markets Forex : Identify currency pairs that move together or in opposite directions, avoid overexposure to similar trades, and spot unusual divergences. Crypto : Examine the dependency of altcoins on Bitcoin and find independent movers for portfolio diversification. Stocks : Detect relationships between stocks in the same industry or find outliers that move differently from their sector. 🟣 Key Uses of Correlation in Trading Risk management and diversification: Select assets with low or negative correlation to reduce portfolio volatility. Avoiding overexposure: Prevent opening multiple positions on highly correlated assets. Pairs trading: Exploit temporary deviations between historically correlated assets for arbitrage opportunities. Intermarket analysis: Study the relationships between different markets like stocks, currencies, commodities, and bonds. Divergence detection: Spot when two typically correlated assets move apart as a possible trend change signal. Market forecasting: Use correlated asset movements to anticipate others’ behavior. Event reaction analysis: Evaluate how groups of assets respond to economic or political events. ❗ Important Note It’s important to note that correlation does not imply causation — it only reflects co-movement between assets. Correlation is also dynamic and can change over time, which is why analyzing it across multiple timeframes provides a more accurate picture. Combining correlation heatmaps with other analytical tools can significantly improve the precision of trading decisions. 🔵 How to Use The Correlation Heatmap Matrix indicator is designed to analyze and manage the relationships between multiple assets at once. After adding the tool to your chart, start by selecting the assets you want to compare (up to 20). Then, choose the Correlation Period that fits your trading strategy. Shorter periods (e.g., 20 bars) are more sensitive to recent price movements, making them suitable for short-term trading, while longer periods (e.g., 100 or 200 bars) provide a broader view of correlation trends over time. The indicator outputs a color-coded matrix where each cell represents the correlation between two assets. Warm colors like red and orange signal strong negative correlation, while cool colors like blue and cyan indicate strong positive correlation. Mid-range tones such as yellow or green suggest correlations that are close to neutral. This visual representation makes it easy to spot market patterns at a glance. One of the most valuable uses of this tool is in portfolio risk management. Portfolios with highly correlated assets are more vulnerable to market swings. By using the heatmap, traders can find assets with low or negative correlation to reduce overall risk. Another key benefit is preventing overexposure. For example, if EUR/USD and GBP/USD have a high positive correlation, opening trades on both is almost like doubling the position size on one asset, increasing risk unnecessarily. The heatmap makes such relationships clear, helping you avoid them. The indicator is also useful for pairs trading, where a trader identifies assets that are usually correlated but have temporarily diverged — a potential arbitrage or mean-reversion opportunity. Additionally, the tool supports intermarket analysis, allowing traders to see how movements in one market (e.g., crude oil) may impact others (e.g., the Canadian dollar). Divergence detection is another advantage: if two typically aligned assets suddenly move in opposite directions, it could signal a major trend shift or a news-driven move. Overall, the Correlation Heatmap Matrix is not just an analytical indicator but also a fast, visual alert system for monitoring multiple markets at once. This is particularly valuable for traders in fast-moving environments like Forex and crypto. 🔵 Settings 🟣 Logic Correlation Period : Number of bars used to calculate correlation between assets. 🟣 Display Table on Chart : Enable/disable displaying the heatmap directly on the chart. Table Size : Choose the table size (from very small to very large). Table Position : Set the table location on the chart (top, middle, or bottom in various alignments). 🟣 Symbol Custom Select Market : Choose the market type (Forex, Stocks, Crypto, or Custom). Symbol 1 to Symbol 20: In custom mode, you can define up to 20 assets for correlation calculation. 🔵 Conclusion The Correlation Heatmap Matrix is a powerful tool for analyzing correlations across multiple assets in Forex, crypto, and stock markets. By displaying a color-coded table, it visually conveys both the strength and direction of correlations — warm colors for strong negative correlation, cool colors for strong positive correlation, and mid-range tones such as yellow or green for near-zero or neutral correlation. This helps traders select assets with low or negative correlation for diversification, avoid overexposure to similar trades, identify arbitrage and pairs trading opportunities, and detect unusual divergences between typically aligned assets. With support for custom mode and up to 20 symbols, it offers high flexibility for different trading strategies, making it a valuable complement to technical analysis and risk management.
Pine Script®指標
由TFlab提供
4
BB next+2This indicator extends the standard Bollinger Bands by allowing you to project future Bollinger Bands based on assumed closing prices for the next trading day (+1) and the day after (+2). Key Features: Plots standard Bollinger Bands (supports SMA, EMA, etc.) Allows manual input of assumed closing prices for the next trading day (+1) and the day after (+2) Displays projected Bollinger Bands (basis, upper, and lower) based on the input values Option to restrict display to the latest bar or confirmed bars only
Pine Script®指標
由Komc提供
5 Min Scalping Oscillator### Overview The 5 Min Scalping Oscillator is a custom oscillator designed to provide traders with a unified momentum signal by fusing normalized versions of the Relative Strength Index (RSI), Stochastic RSI, and Commodity Channel Index (CCI). This combination creates a more balanced view of market momentum, overbought/oversold conditions, and potential reversals, while incorporating adaptive smoothing, dynamic thresholds, and market condition filters to reduce noise and false signals. Unlike standalone oscillators, the 5 Min Scalping Oscillator adapts to trending or sideways regimes, volatility levels, and higher timeframe biases, making it particularly suited for short-term charts like 5-minute timeframes where quick, filtered signals are valuable. ### Purpose and Originality of the Fusion Traditional oscillators like RSI measure momentum but can lag in volatile markets; Stochastic RSI adds sensitivity to RSI extremes but often generates excessive noise; and CCI identifies cyclical deviations but may overreact to minor price swings. The 5 Min Scalping Oscillator addresses these limitations by weighting and blending their normalized outputs (RSI at 45%, Stochastic RSI at 35%, and CCI at 20%) into a single raw oscillator value. This weighted fusion creates a hybrid signal that balances lag reduction with noise filtering, resulting in a more robust indicator for identifying reversal opportunities. The originality lies in extending this fusion with: - **Adaptive Smoothing via KAMA (Kaufman's Adaptive Moving Average):** Adjusts responsiveness based on market efficiency, speeding up in trends and slowing in ranges—unlike fixed EMAs, this helps preserve signal integrity without over-smoothing. - **Dynamic Overbought/Oversold Thresholds:** Calculated using rolling percentiles over a user-defined lookback (default 200+ periods), these levels adapt to recent oscillator behavior rather than relying on static values like 70/30, making the indicator more responsive to asset-specific volatility. - **Multi-Factor Filters:** Integrates ADX for trend detection, ATR percentiles for volatility confirmation, and optional higher timeframe RSI bias to ensure signals align with broader market context. This layered approach reduces false positives (e.g., ignoring low-volatility crossovers) and adds a confidence score based on filter alignment, which is not typically found in simple mashups. This design justifies the combination: it's not a mere overlay of indicators but a purposeful integration that enhances usefulness by providing context-aware signals, helping traders avoid common pitfalls like trading against the trend or in low-volatility chop. The result is an original tool that performs better in diverse conditions, especially on 5-minute charts for intraday trading, where rapid adaptations are key. ### How It Works The 5 Min Scalping Oscillator processes price data through these steps: 1. **Normalization and Fusion:** - RSI (default length 10) is normalized to a -1 to +1 scale using a tanh transformation for bounded output. - Stochastic RSI (default length 14) is derived from RSI highs/lows and scaled similarly. - CCI (default length 14) is tanh-normalized to align with the others. - These are weighted and summed into a raw value, emphasizing RSI for core momentum while using Stochastic RSI for edge sensitivity and CCI for cycle detection. 2. **Smoothing and Signal Line:** - The raw value is smoothed (default KAMA with fast/slow periods 2/30 and efficiency length 10) to reduce whipsaws. - A shorter signal line (half the smoothing length) is added for crossover detections. 3. **Filters and Enhancements:** - **Trend Regime:** ADX (default length 14, threshold 20) classifies markets as trending (ADX > threshold) or sideways, allowing signals in both but prioritizing alignment. - **Volatility Check:** ATR (default length 14) percentile (default 85%) ensures signals only trigger in above-average volatility, filtering out flat markets. - **Higher Timeframe Bias:** Optional RSI (default length 14 on 60-minute timeframe) provides bull/neutral/bear bias (above 55, 45-55, below 45), requiring signal alignment (e.g., bullish signals only if bias is neutral or bull). - **Dynamic Levels:** Percentiles (default OB 85%, OS 15%) over recent oscillator values set adaptive overbought/oversold lines. 4. **Signal Generation:** - Bullish (B) signals on upward crossovers of the smoothed line over the signal line, filtered by conditions. - Bearish (S) signals on downward crossunders. - Each signal includes a confidence score (0-100) based on factors like trend alignment (25 points), volatility (15 points), and bias (20 points if strong, 10 if neutral). The output includes a glowing oscillator line, histogram for divergence spotting, dynamic levels, shapes/labels for signals, and a dashboard table summarizing regime, ADX, bias, levels, and last signal. ### How to Use It This indicator is easy to apply and interpret, even for beginners: - **Adding to Chart:** Apply the 5 Min Scalping Oscillator to a clean chart (no other indicators unless explained). It's non-overlay, so it appears in a separate pane. For 5-minute timeframes, keep defaults or tweak lengths shorter for faster response (e.g., RSI 8-12). - **Interpreting Signals:** - Look for green upward triangles labeled "B" (bullish) at the bottom for potential entry opportunities in uptrends or reversals. - Red downward triangles labeled "S" (bearish) at the top signal potential exits or shorts. - Higher confidence scores (e.g., 70+) indicate stronger alignment—use these for priority trades. - Watch the histogram for divergences (e.g., price higher highs but histogram lower highs suggest weakening momentum). - Dynamic OB (green line) and OS (red line) help gauge extremes; signals near these are more reliable. - **Dashboard:** At the bottom-right, it shows real-time info like "Trending" or "Sideways" regime, ADX value, HTF bias (Bull/Neutral/Bear), OB/OS levels, and last signal—use this for quick context. - **Customization:** Adjust inputs via the settings panel: - Toggle KAMA for adaptive vs. EMA smoothing. - Set HTF to "60" for 1-hour bias on 5-min charts. - Increase ADX threshold to 25 for stricter trend filtering. - **Best Practices:** Combine with price action (e.g., support/resistance) or volume for confirmation. On 5-min charts, pair with a 1-hour HTF for intraday scalping. Always use stop-losses and risk no more than 1-2% per trade. ### Default Settings Explanation Defaults are optimized for 5-minute charts on volatile assets like stocks or forex: - RSI/Stoch/CCI lengths (10/14/14): Shorter for quick momentum capture. - Signal smoothing (5): Responsive without excessive lag. - ADX threshold (20): Balances trend detection. - ATR percentile (0.85): Filters ~15% of low-vol signals. - HTF RSI (14 on 60-min): Aligns with hourly trends. - Percentiles (OB 85%, OS 15%): Adaptive to recent data. If changing, test on historical data to ensure fit—e.g., longer lengths for less noisy assets. ### Disclaimer The 5 Min Scalping Oscillator is an educational tool to visualize momentum and does not guarantee profits or predict future performance. All signals are based on historical calculations and should not be used as standalone trading advice. Past results are not indicative of future outcomes. Traders must conduct their own analysis, use proper risk management, and consider market conditions. No claims are made about accuracy, reliability, or performance.
Pine Script®指標
由Trading_Indicator_Pro提供
1
New RSI📌 New RSI The New RSI is a modern, enhanced version of the classic RSI created in 1978 — redesigned for today’s fast-moving markets, where algorithmic trading and AI dominate price action. This indicator combines: Adaptive RSI: Adjusts its calculation length in real time based on market volatility, making it more responsive during high volatility and smoother during calm periods. Dynamic Bands: Upper and lower bands calculated from historical RSI volatility, helping you spot overbought/oversold conditions with greater accuracy. Trend & Regime Filters: EMA and ADX-based detection to confirm signals only in favorable market conditions. Volume Confirmation: Signals appear only when high trading volume supports the move — green volume for bullish setups and red volume for bearish setups — filtering out weak and unreliable trades. 💡 How it works: A LONG signal appears when RSI crosses above the lower band and the volume is high with a bullish candle. A SHORT signal appears when RSI crosses below the upper band and the volume is high with a bearish candle. Trend and higher timeframe filters (optional) can help improve precision and adapt to different trading styles. ✅ Best Use Cases: Identify high-probability reversals or pullbacks with strong momentum confirmation. Avoid false signals by trading only when volume validates the move. Combine with your own support/resistance or price action strategy for even higher accuracy. ⚙️ Fully Customizable: Adjustable RSI settings (length, volatility adaptation, smoothing) Dynamic band sensitivity Volume threshold multiplier Higher timeframe RSI filter Color-coded background for market regime visualization This is not just another RSI — it’s a complete, next-gen momentum tool designed for traders who want accuracy, adaptability, and confirmation in every signal.
Pine Script®指標
由BullBearSR提供