立即開始

PO3

cephxs + fadi / HTF PSPHTF PSP - PRECISION SWING POINTS Detect divergence-based Precision Swing Points (PSPs) across multiple higher timeframes with automatic correlated asset detection. WHAT'S NEW (vs Original HTF Candles) This indicator builds on @fadizeidan's excellent ICT HTF Candles foundation with significant new functionality, depending on who you ask of course: ✨ PSP Divergence Detection: Automatically identifies Precision Swing Points where price diverges from correlated assets—the original has no divergence analysis ✨ Auto Asset Correlation: Uses AssetCorrelationUtils library to detect and pair correlated assets (ES↔NQ↔DXY, BTC↔ETH, Gold↔Silver, etc.)—no manual setup required ✨ Multi-Asset Comparison: Tracks up to 3 correlated assets simultaneously with divergence relationships between all pairs ✨ Dynamic Asset Reordering: When you switch charts, the indicator automatically reorders assets so your chart is always primary ✨ Inverse Correlation Support: Properly handles inversely correlated assets like DXY (bullish DXY = bearish signal for risk assets) ✨ HTF Sweep Detection: New sweep line feature highlights when HTF candles take out previous highs/lows and close back inside. One of my followers asked me for this, there you go anon. 🔧 Streamlined to 3 HTFs: Focused design with 3 HTF slots (vs 6) for cleaner charts and better performance The original remains excellent for pure HTF candle visualization. This version adds institutional flow analysis through divergence detection. WHAT IT DOES This indicator displays Higher Timeframe (HTF) candles to the right of your chart and highlights Precision Swing Points—pivots where price diverges from correlated assets. When ES makes a new high but NQ doesn't follow, or gold pushes higher while DXY fails to confirm, you're looking at institutional repositioning. PSPs mark these moments on your HTF candles, giving you a clean visual signal for potential reversals. HOW IT WORKS Divergence Detection The indicator compares price action between your chart and up to two correlated assets. A divergence occurs when one asset makes a directional move (bullish/bearish candle) while a correlated asset moves the opposite direction. Three divergence relationships are tracked: Primary vs Secondary (e.g., ES vs NQ) Primary vs Tertiary (e.g., ES vs DXY) Secondary vs Tertiary (e.g., NQ vs DXY) PSP Confirmation A candle is marked as a PSP when: A divergence exists between correlated assets A swing pivot forms (high > previous high AND high > next high, or vice versa for lows) This dual confirmation filters noise and highlights only meaningful institutional activity. Automatic Asset Detection In Auto mode, the indicator uses the AssetCorrelationUtils library to detect your chart's asset class and automatically select the most relevant correlated pairs: Indices: ES ↔ NQ ↔ DXY, YM ↔ ES ↔ NQ Forex: EURUSD ↔ DXY ↔ GBPUSD, USDJPY ↔ DXY ↔ US10Y Crypto: BTC ↔ ETH ↔ DXY Metals: Gold ↔ Silver ↔ DXY Energy: CL (Oil) ↔ NG ↔ DXY HTF Sweep Detection Sweeps are detected when an HTF candle (C2) takes out the high or low of the previous candle (C1) and then closes back inside. This marks liquidity grabs on the higher timeframe. HOW TO USE Enable HTF timeframes: Select 1-3 higher timeframes relevant to your trading style (e.g., 30m, 90m, 4H for intraday traders) Watch for PSP candles: When a candle body color changes to the divergence color, a PSP has formed Note the direction: Bullish divergence (your asset bullish while correlated asset bearish) suggests upside; bearish divergence suggests downside Combine with LTF structure: Use PSPs as bias, then look for entry on lower timeframes (CHoCH, FVG, etc.) Sweeps confirm liquidity: A sweep followed by a PSP is a strong reversal signal INPUTS HTF Selection HTF 1/2/3: Enable/disable each HTF slot with timeframe and candle count Custom Daily Open: Use Midnight, 8:30, or 9:30 ET as daily candle open Styling Body/Border/Wick Colors: Customize bullish and bearish candle appearance Padding/Buffer/HTF Buffer: Control spacing between candles and timeframe groups Labels HTF Label: Show timeframe name above/below candles Remaining Time: Countdown to candle close Label Position: Top, Bottom, or Both Label Alignment: Align across timeframes or follow individual candles Interval Value: Show interval details on candles Imbalance Fair Value Gap: Highlight FVGs on HTF candles Volume Imbalance: Highlight VIs on HTF candles HTF Sweeps: Show sweep lines when C2 takes out C1's high/low Trace Trace Lines: Draw lines from HTF candle OHLC levels back to chart price Anchor: Anchor to first or last timeframe PSP Divergence Detection Precise Mode: Only highlight pivots on current asset (stricter confirmation) Divergence Body Colors: Custom colors for bullish/bearish divergence candles Asset Selection Correlation Preset: Auto (library-detected) or Manual Manual Assets 1/2/3: Specify custom correlated assets Invert Asset 3: Flip the bullish/bearish interpretation for inverse correlations (e.g., DXY) KEY FEATURES Multi-HTF Display: Up to 3 higher timeframes displayed simultaneously Auto Asset Detection: Automatically finds relevant correlated assets for your chart Dynamic Reordering: When you switch charts, assets reorder so the chart is always primary Inverse Correlation Support: Properly handles DXY and other inversely correlated assets HTF Sweep Detection: Highlights liquidity grabs on higher timeframes FVG/VI Detection: Fair Value Gaps and Volume Imbalances on HTF candles Remaining Time Counter: Know exactly when the next HTF candle closes BEST PRACTICES Use PSPs as directional bias, not direct entries—wait for LTF confirmation A PSP at a key level (previous day high, weekly open) carries more weight Multiple PSPs across different HTFs pointing the same direction = stronger signal Sweeps that fail to hold (sweep + PSP) often mark significant reversals In Auto mode, trust the library's asset selection—it's been tuned for common correlations DISCLAIMER This indicator is for educational purposes only and does not constitute financial advice. Divergences and PSPs do not guarantee reversals—always use proper risk management and confirm signals with your own analysis. Past performance does not guarantee future results. CREDITS Original HTF candle plotting concept by @fadizeidan. PSP divergence detection and asset correlation logic by cephxs & fstarcapital. Uses the AssetCorrelationUtils library by fstarcapital. Open Sourced For all. Enjoy. Made with ❤️ by cephxs + fadi
Pine Script®指標
由fstarcapital提供
7
Monthly Seasonality AnalyzerThis indicator analyzes historical performance/seasonality of a chosen month, from date of inception to present. Users can choose any calendar month via dropdown menu. For each historical month selected, it will calculate the monthly percentage gain/loss, range(volatility), and average gain/loss percentage, average range percentage across all recorded years. Positive returns are colored green and negative returns are red. Also, calculates if the selected month was bullish(open>close) or bearish. When current chart month matches the selected month, it shows the in-progress range as well. Data is collected from 1930 to present. Results are shown in vertical and horizontal tables. If the vertical table exceeds a 36 years, the script automatically switches to horizontal table to display all the data, with option to change table position. Overall this tool is valuable for seasonality research, such as Santa Rally, May Go Away and swing trading/ position trading to capture the monthly PO3 range. Most seasonality indicators show all 12 months at once or use daily bars. This one zooms in deeply on one month only, providing detailed per-year breakdowns, accurate completed-month stats, and a practical live range display. The script uses arrays to store years, gains, and ranges. Uses table.new(), table.cell(), table.merge_cells() for easily readable result display. Code handles the current in-progress month separately (shows live range without including it in historical averages). **Script will not run on any timeframe other than monthly and displays error otherwise. Script is best used on spot and not futures.
Pine Script®指標
由Eightgent7提供
cd_bias_profile_Cxcd_bias_profile Cx Overview: cd_bias_profile_Cx is an all-in-one professional analysis terminal designed to determine market direction (Bias) based on institutional trading strategies (SMC & ICT). This tool integrates multi-timeframe (MTF) data, institutional liquidity sweeps, SMT divergences, and candle closure confirmations into a single cohesive structure, providing traders with a comprehensive map of institutional Order Flow. 🚀 Advanced Hierarchical Profile Architecture The indicator visualizes the market through a three-layered hierarchy (Major, Middle, Plot), allowing you to see exactly which higher-tier structure the current price action is serving. • Smart Timeframe (Auto-TF) Logic: In "Auto" mode, the system automatically selects the most logical hierarchy based on your chart interval using the following sequence: . o Example Scenario: If your chart is set to 5-Minute (5m):  Major (Macro Structure): H4 (The outermost container candle)  Middle (Intermediate Structure): H1 (Mid-scale candle)  Plot (Local Structure): 15m (The smallest nested high-timeframe candle) • Nested Candle Design: Each high-timeframe candle is rendered as transparent boxes with specific body colors, encapsulating the lower-tier price action (OHLC) within it. • Cyclical Refresh: Profile drawings reset automatically at the opening of every new Major timeframe candle. This ensures the analysis remains focused on the freshest institutional cycle. 🧠 Bias Algorithm & Decision Mechanism To eliminate subjective interpretation, the algorithm operates on a purely mathematical logic based solely on Candle Closures (Close). It generates three distinct outcomes: 1. Reversal: o Condition 1: A liquidity Sweep must occur at the HTF level. o Condition 2 (SMT Confirmation): If no sweep is detected on the primary pair, the algorithm automatically scans correlated assets (e.g., checking GBPUSD or DXY for an EURUSD trade). An SMT Divergence in a correlated asset is accepted as institutional manipulation confirmation. o Final Trigger: Once a CISD (Change in State of Delivery) occurs on the Lower Timeframe (LTF), the "Reversal" bias is confirmed. 2. Continuation: When a high-timeframe candle closes convincingly above/below the previous candle's High or Low, the algorithm reports that the current trend maintains its strength. 3. Indeterminate: In "non-delivery" zones where the market neither sweeps liquidity nor creates a structural break, the algorithm remains neutral to prevent overtrading. 🚨 Alert Center The alert system is designed for high-confluence setups, ensuring you never miss a structural shift: • Flexible TF Selection: You can manually toggle which of the 5 tracked timeframes (1M, 1W, 1D, etc.) should trigger notifications based on your strategy. • "Any of Them" Function: When enabled, an instant notification is sent the moment a "Reversal" or "Continuation" signal forms on any of your selected timeframes. • Directional Filtering: You can filter alerts to receive only "Bullish" or only "Bearish" setups, allowing you to align with your primary macro bias. ⚙️ Pro Tips for Usage • Invalidation Lines: The dashed lines on the chart indicate the exact price level where the institutional bias is "invalidated." These serve as professional-grade stop-loss levels. • B-ADJ Support: For Futures traders, back-adjustment settings are optimized within the code for seamless data transition. • Manual Mode: If you wish to use custom timeframes not found in the standard sequence (e.g., 2-hour or 3-day charts), you can define them via the "Manuel" settings toggle. • High-probability trade setups can be expected when there is multi-timeframe alignment in the same direction. • Strategic Use Cases: The indicator is optimized for trading Distribution Phases within advanced frameworks. Whether you are looking for the C3 candle in the Universal Model or the Distribution (D) phase in an AMD (Power of 3) setup, this tool provides the necessary structural confirmation. • User Discretion: Please note that this is a directional bias tool. While it identifies which direction is supported by multi-timeframe alignment, the final execution and entry management on lower timeframes are the user's responsibility. • Always remember to seek additional confluence before executing a trade. Chart Visual Profile Visual Example (SMT Usage) : On the chart, while the 10:00 H1 candle on GBPUSD sweeps its previous candle's liquidity, its correlated pair EURUSD does not show a sweep. If the "Use SMT for Bias" option is enabled, this SMT divergence with the correlated pair is accepted as a valid HTF Sweep. Upon the new candle open, once a 5m CISD confirmation occurs on EURUSD, the Bias Table will display "Bearish" for the H1/5m row. Entry examples: Please feel free to share your feedback and suggestions in the comments below. Happy trading!
Pine Script®指標
由cdikici71提供
50
Custom Time Separators + Hourly Open LinesThis Indicator is for those who wants to keep the chart clean and Study 1HR Profile. best USE is : 1HR line Projected and 1 HR separator is plotted on the chart i Use 4 Hrs. plotted and using for CRT Method to identify SWEEP of C1 by C2 and, Entering ON C2 when its Trading back up, or on your comfort of confirmation with MSS + FVG / OB Lot of ICT Model can be traded and used with this including PO3 Lumi trades : 1HR PO3 Ttrades CRT and Many more, let me know if want to add anything if i think its useful we can add. cheers
Pine Script®指標
由peter_whites提供
$ - HTF Sweeps & PO3HTF Sweeps & PO3 Indicator The HTF Sweeps & PO3 indicator is a powerful tool designed for traders to visualise higher timeframe (HTF) candles, identify liquidity sweeps, and track key price levels on a lower timeframe (LTF) chart. Built for TradingView using Pine Script v6, it overlays HTF candle data and highlights significant price movements, such as sweeps of previous highs or lows, to help traders identify potential liquidity sweep and reversal points. The indicator is highly customisable, offering a range of visual and alert options to suit various trading strategies. Features Higher Timeframe (HTF) Candle Visualisation: - Displays up to three user-defined HTF candles (e.g., 15m, 1H, 4H) overlaid on the LTF chart. - Customisable candle appearance with adjustable size (Tiny to Huge), offset, spacing, and colours for bullish/bearish candles and wicks. - Option to show timeframe labels above or below HTF candles with configurable size and position. Liquidity Sweep Detection: - Identifies bullish and bearish sweeps when price moves beyond the high or low of a previous HTF candle and meets specific conditions. - Displays sweeps on both LTF and HTF with customisable line styles (Solid, Dashed, Dotted), widths, and colours. - Option to show only the most recent sweep per candle to reduce chart clutter. Invalidated Sweep Tracking: - Detects and visualises invalidated sweeps (when price moves past a sweep level in the opposite direction). - Configurable display for invalidated sweeps on LTF and HTF with distinct line styles and colours. Previous High/Low Lines: - Plots horizontal lines at the high and low of the previous HTF candle, extending on both LTF and HTF. - Customisable line style, width, and color for easy identification of key levels. - Real-Time Sweep Detection: -Optional real-time sweep visualisation for active candles, enabling traders to monitor developing price action. Alert System: - Triggers alerts for sweep formation (when a new sweep is detected). - Triggers alerts for sweep invalidation (when a sweep is no longer valid). - Alerts include details such as timeframe, ticker, and price level for precise notifications. Performance Optimisation: - Efficiently manages resources with configurable limits for lines, labels, boxes, and bars (up to 500 each). - Cleans up outdated visual elements to maintain chart clarity. Flexible Configuration: - Supports multiple timeframes for HTF candles with user-defined settings for visibility and number of candles displayed (1–60). - Toggle visibility for HTF candles, sweeps, invalidated sweeps, and high/low lines independently for LTF and HTF. This indicator is ideal for traders focusing on liquidity hunting, order block analysis, or price action strategies, providing clear visual cues and alerts to enhance decision-making.
Pine Script®指標
由wintonbanks提供
24
ICT Fractal HTF Candles [TFR]ICT HTF Fractal Candles This indicator overlays higher timeframe (HTF) candles directly on your current chart for better multi-timeframe analysis. It plots up to the last 4 candles from a user-selected timeframe (5m, 15m, 1h, 4h, or 1D) with customizable body and border colors. Features: Displays the last 4 higher timeframe candles (open, high, low, close) on your current chart. Customizable bullish, bearish, and inside close candle colors. Optional midpoint wick lines (top and bottom) for precision reference, with extendable length for clarity. Optional candle midpoint line for additional confluence. Overlay mode allows you to see HTF structure without switching chart timeframes. Timeframe label display so you always know which HTF is being plotted. Offset control for shifting candle position. Use Case: This tool helps traders apply ICT concepts like PO3, midpoint reference levels, and multi-timeframe confirmation without constantly switching between charts. It’s particularly useful for identifying liquidity zones, midpoint reactions, and higher timeframe market structure while executing on a lower timeframe.
Pine Script®指標
由TheFundedRoad提供
12
cd_Quarterly_cycles_SSMT_TPD_CxGeneral This indicator is designed in line with the Quarterly Theory to display each cycle on the chart, either boxed and/or in candlestick form. Additionally, it performs inter-cycle divergence analysis ( SSMT ) with the correlated symbol, Terminus Price Divergence ( TPD ), Precision Swing Point ( PSP ) analysis, and potential Power of Three ( PO3 ) analysis. Special thanks to @HandlesHandled for his great indicator, which I used while preparing the cycles content. Details & Usage: Optional cycles available: Weekly, Daily, 90m, and Micro cycles. Displaying/removing cycles can be controlled from the menu (cycles / candles / labels). All selected cycles can be shown, or you can limit the number of displayed cycles (min: 2, max: 4). The summary table can be toggled on/off and repositioned. What’s in the summary table? • Below the header, the correlated symbol used in the analysis is displayed (e.g., SSMT → US500). • If available, live and previous bar results of the SSMT analysis are shown. • Under the PSP & TPD section, results are displayed when conditions are met. • Under Alerts, the real-time status of conditions defined in the menu is shown. • Under Potential AMD, possible PO3 analysis results are displayed. Analysis & Symbol Selection: To run analyses, a correlated symbol must first be defined with the main symbol. Default pairs are preloaded (see below), but users should adjust them according to their exchange and instruments. If no correlated pair is defined, cycles are displayed only as boxes/candles. Once defined pairs are opened on the chart, analyses load automatically. Pairs listed on the same row in the menu are automatically linked, so no need to re-enter them across rows. SSMT Analysis: Based on the chart’s timeframe, divergences are searched across Weekly, Daily, 90m, and Micro cycles. The code will not produce results for smaller cycles than the current timeframe. (Example: On H1, Micro cycles will not be displayed.) Results are obtained by comparing the highs and lows of consecutive cycles in the same period. If one pair makes a new high/low while the other does not, this divergence is added to SSMT results. The difference from classic SMT is that cycles are used instead of bars. PSP & TPD Analysis: A correlated symbol must be defined. For PSP, timeframe options are added to the menu. Users toggle timeframes on/off by checking/unchecking boxes. In selected timeframes, PSP & TPD analysis is performed. • PSP: If candlesticks differ in color (bullish/bearish) between symbols and the bar is at a high/low of the timeframe (and higher/lower than the bars before/after it), it is identified as a PSP. Divergences between pairs are interpreted as potential reversal signals. • TPD: Once a PSP occurs, the closing price of the previous bar and the opening price of the next bar are compared. If one symbol shows continuation while the other does not, it is marked as a divergence. Example: Let’s assume Pair 1 and Pair 2 are selected in the menu with the H4 timeframe, and our cycle is Weekly (Box). For Pair 1, the H4 candle at the Weekly high level: • Is positioned at the Weekly high, • Its high is above both the previous and the next candle, • It closed bearish (open > close). For Pair 2, the same H4 candle closed bullish (close > open). → PSP conditions are met. For TPD, we now check the candles before and after this PSP (H4) candle on both pairs. Comparing the previous candle’s close with the next candle’s open, we see that: • In Pair 1, the next open is lower than the previous close, • In Pair 2, the next open is higher than the previous close. Pair 1 → close > open Pair 2 → close < open Since they are not aligned in the same direction, this is interpreted as a divergence — a potential reversal signal. While TPD results are displayed in the summary table, whenever the conditions are met in the selected timeframes, the signals are also plotted directly on the chart. (🚦, X) • Higher timeframe TPD example: • Current timeframe TPD example: Alerts: The indicator can be conditioned based on aligned timeframes defined within the concept. Example (assuming random active rows in the screenshot): • Weekly Bullish SSMT → Tf2 (menu-selected) Bullish TPD → Daily Bullish SSMT. Selecting “none” in the menu means that condition is not required. When an alert is triggered, it will be displayed in the corresponding row of the table. • Example with only condition 3 enabled: Potential PO3 Analysis: According to Quarterly Theory, price moves in cycles, and the same structures are assumed to continue in smaller timeframes. From classical PO3 knowledge: before the main move, price first manipulates in the opposite direction to trap buyers/sellers, then makes its true move. The cyclical sequence is: (A)ccumulation → (M)anipulation → (D)istribution → (R)eversal / Continuation. Within cycle candles, the first letter of each phase is displayed. So how does the analysis work? If the active cycle is in (M)anipulation or (D)istribution phase, and it sweeps the previous cycle’s high or low but then pulls back inside, this is flagged in the summary table as a possible PO3 signal. In other words, it reflects the alignment of theoretical sequence with real-time price action. Confluence with SSMT and TPD conditions further strengthens the expectation. Final Note: No single marking or alert carries meaning on its own — it must always be evaluated in the context of your concept knowledge. Instead of trading purely on expectations, align bias + trend + entry confirmations to improve your success rate. Feedback and suggestions are welcome. Happy trading!
Pine Script®指標
由cdikici71提供
77
B A N K $ - HTF Candle Boxes (Power of 3)This indicator allows you to visualise the HTF candles on the LTF's, this is useful for using the Power of 3 / Accumulation, Manipulation & Distribution concepts. By default, the HTF interval is set to 1h, this means that an outline will be created around the LTF candles that are within that 1h window. (i.e from 13:00-14:00 etc). Features HTF Interval Selector - this allows the user to customise which HTF interval to use Candle Boxes - this outlines the full outer perimeter of the relevant candles Include Body - this highlights the distance between the candle Open & Close Show MidLine Additional Settings Hide Side Lines - this will only draw the Top & Bottom lines Extend Lines to Current Candle - most recent Top & Bottom lines will extend to current price Draw Lines from Exact Candle - this makes the most recent candle lines cleaner I personally use this indicator to outline the most recent 3 1h candles to make it easier to identify sweeps & reversals however there is additional functionality to allow the user to customise the indicator to their preference.
Pine Script®指標
由wintonbanks提供
CRT + PO3 Range Theory Hey everyone, I’ve put together a little script for TradingView that tries to show the classic CRT + PO3 (Power of Three) pattern. It’s still a work in progress, so please use it on a demo account and let me know what you think! What It Does Accumulation Phase: On each higher‐timeframe bar (e.g. 2-hour), it draws a shaded zone where price is hanging out. That’s when we assume “big players” are quietly building positions. Manipulation Phase: If price briefly pokes above or below that zone but then slips back inside, it marks that wick as a shake-out. Distribution Phase: When price finally closes cleanly outside the zone, it draws another shaded area and drops a “Distribution” label plus a big LONG or SHORT arrow on that bar. You can tweak it so it only shows signals when a bar closes (no more weird flashing mid-bar), or even allow “direct” Distribution on a clean breakout without waiting for a fake wick first. How to Set It Up Add the script from your Indicators list. Pick your HTF (I like 2-hour or 4-hour). Turn “Show Zone Labels” on or off—these are the little “Accumulation/Manipulation/Distribution” tags. Turn “Show Entry Signals” on to get the big LONG/SHORT arrows. If you hate flicker, check “Show signals only at bar close.” If you want to catch a swift breakout (no fake-out needed), check “Allow direct Distribution on clean breakout.” There are also sliders for zone colors, transparency, label size, and how far above/below the bars the labels sit. Why It’s Still a Beta I’m not a CRT/PO3 guru—this is more of a hobby project and a little facination for this strategy. There might be edge cases where it misses a shake-out or flags a Distribution too early. I take no responsibility for your trades—please only run it on a demo account until we’ve worked out the quirks. Feedback Wanted! If you try it out, I’d love to hear: Did the Manipulation wicks line up where you expected? Were the Distribution arrows on the right bars? Any ideas for easier settings or extra alerts? Thanks for testing and helping me turn this into something solid!
Pine Script®指標
由PDK1977提供
Candle Range Trading (CRT) with Alerts 📌 Description: The Candle Range Trading (CRT) indicator identifies potential reversal or continuation setups based on specific two-candle price action patterns. It analyzes pairs of candles to detect Bullish or Bearish CRT patterns and provides visual signals (triangles) and alert notifications to support scalp or swing trading strategies. 🔍 How It Works: 🔻 Bearish CRT Pattern: Candle 1 is bullish Candle 2 is bearish Candle 2's high > Candle 1's high Candle 2 closes within Candle 1’s range 🔺 Red triangle above candle 🔺 Bullish CRT Pattern: Candle 1 is bearish Candle 2 is bullish Candle 2's low < Candle 1's low Candle 2 closes within Candle 1’s range 🔻 Green triangle below candle 📈 Visual Features: 🔺 Red triangle = Bearish CRT 🔻 Green triangle = Bullish CRT 📏 Optional box showing CRT High and CRT Low 🔔 Built-in Alerts: Bullish CRT Alert: "Bullish CRT Pattern Detected" Bearish CRT Alert: "Bearish CRT Pattern Detected" Set alerts to get notified instantly when a pattern is detected. ⚠️ Note: Use in conjunction with trend filters, support/resistance, or volume for best results. Ideal for scalping or short-term trades. Avoid trading in choppy or low-volume markets. ⚠️ Disclaimer: This script was generated with the assistance of ChatGPT by OpenAI and is intended for educational and informational purposes only. All strategies, alerts, and signals derived from this indicator should be thoroughly backtested and validated before using in live trading. Trading involves substantial risk, and past performance is not indicative of future results. The author and ChatGPT bear no responsibility for any trading losses or financial decisions made using this script. Users are solely responsible for the risks associated with their trading actions. Always apply proper risk management and perform your own due diligence before making any financial decisions.
Pine Script®指標
由marcostan93提供
3
Clean OHLC Lines | BaksPlots clean, non-repainting OHLC lines from higher timeframes onto your chart. Ideal for tracking key price levels (open, high, low, close) with precision and minimal clutter. Core Functionality Clean OHLC Lines = Historical Levels + Non-Repainting Logic • Uses lookahead=on to anchor historical lines, ensuring no repainting. • Displays OHLC lines for customizable timeframes (15min to Monthly). • Optional candlestick boxes for visual context. Key Features • Multi-Timeframe OHLC: Plot lines from 15min, 30min, 1H, 4H, Daily, Weekly, or Monthly timeframes. • Non-Repainting Logic: Historical lines remain static and never recalculate. • Customizable Styles: Adjust colors, line widths (1px-4px), and transparency for high/low/open/close lines. • Candle Display: Toggle candlestick boxes with bull/bear colors and adjustable borders. • Past Lines Limit: Control how many historical lines are displayed (1-500 bars). User Inputs • Timeframe: Select the OHLC timeframe (e.g., "D" for daily). • # Past Lines: Limit historical lines to avoid overcrowding (default: 10). • H/L Mode: Draw high/low lines from the current or previous period. • O/C Mode: Anchor open/close lines to today’s open or yesterday’s close. • Line Styles: Customize colors, transparency, and styles (solid/dotted/dashed). • Candle Display: Toggle boxes/wicks and adjust bull/bear colors. Important Notes ⚠️ Alignment: • Monthly/weekly timeframes use fixed approximations (30d/7d). • For accuracy, ensure your chart’s timeframe ≤ the selected OHLC timeframe (e.g., use 1H chart for daily lines). ⚠️ Performance: • Reduce # Past Lines on low-end devices for smoother performance. Risk Disclaimer Trading involves risk. OHLC lines reflect historical price levels and do not predict future behavior. Use with other tools and risk management. Open-Source Notice This script is open-source under the Mozilla Public License 2.0. Modify or improve it freely, but republishing must follow TradingView’s House Rules. 📈 Happy trading!
Pine Script®指標
由TrDrBAKS提供
11
Vortex Candle MarkerVortex Candle Marker The Vortex Candle Marker is a specialized TradingView indicator designed to identify and highlight **Vortex Candles**—candles that momentarily form without wicks on either the high or low. This unique price behavior can signal potential price retracements or reversals, aligning with the **Power of Three (PO3)** concept in price action theory. Indicator Logic: A candle is classified as a **Vortex Candle** if either of these conditions is met during its formation: 1. **Vortex Top:** The **high** equals either the **open** or **close**, indicating no upper wick. 2. **Vortex Bottom:** The **low** equals either the **open** or **close**, indicating no lower wick. When a Vortex Candle is detected, the indicator changes the **candle border color** to **aqua**, making it easy to identify these significant price moments. Market Insight & PO3 Interpretation: In typical price behavior, most candles exhibit both upper and lower wicks, representing price exploration before settling at a closing value. A candle forming without a wick suggests **strong directional intent** at that moment. However, by the **Power of Three (PO3)** concept—Accumulation, Manipulation, and Distribution—such wickless formations often imply: - **Price Reversion Likelihood:** When a candle temporarily forms without a wick, it suggests the market may **revisit the opening price** to establish a wick before the candle closes. - **Liquidity Manipulation:** The absence of a wick may indicate a **stop-hunt** or liquidity grab, where the price manipulates one side before reversing. - **Entry Triggers:** Identifying these moments can help traders anticipate potential **retracements** or **continuations** within the PO3 framework. Practical Application - **Early Reversal Detection:** Spot potential price reversals by observing wickless candles forming at key levels. - **Breakout Validation:** Use Vortex Candles to confirm **true breakouts** or **false moves** before the price returns. - **Liquidity Zones:** Identify areas where the market is likely to revisit to create a wick, signaling entry/exit points. This indicator is a powerful tool for traders applying **Po3** methodologies and seeking to capture price manipulation patterns.
Pine Script®指標
由whaleinsider提供
1
Twitter Model ICT [TradingFinder] MMXM ERL D + FVG + M15 MSS/SMT🔵 Introduction The Twitter Model ICT is a trading approach based on ICT (Inner Circle Trader) models, focusing on price movement between external and internal liquidity in lower timeframes. This model integrates key concepts such as Market Structure Shift (MSS), Smart Money Technique (SMT) divergence, and CISD level break to identify precise entry points in the market. The primary goal of this model is to determine key liquidity levels, such as the previous day’s high and low (PDH/PDL) and align them with the Fair Value Gap (FVG) in the 1-hour timeframe. The overall strategy involves framing trades around the 1H FVG and using the M15 Market Structure Shift (MSS) for entry confirmation. The Twitter Model ICT is designed to utilize external liquidity levels, such as PDH/PDL, as key entry zones. The model identifies FVG in the 1-hour timeframe, which acts as a magnet for price movement. Additionally, traders confirm entries using M15 Market Structure Shift (MSS) and SMT divergence. Bullish Twitter Model : In a bullish setup, the price sweeps the previous day’s low (PDL), and after confirming reversal signals, buys are executed in internal liquidity zones. Conversely, in a bearish setup, the price sweeps the previous day’s high (PDH), and after confirming weakness signals, sells are executed. Bearish Twitter Model : In short setups, entries are only executed above the Midnight Open, while in long setups, entries are taken below the Midnight Open. Adhering to these principles allows traders to define precise entry and exit points and analyze price movement with greater accuracy based on liquidity and market structure. 🔵 How to Use The Twitter Model ICT is a liquidity-based trading strategy that analyzes price movements relative to the previous day’s high and low (PDH/PDL) and Fair Value Gap (FVG). This model is applicable in both bullish and bearish directions and utilizes the 1-hour (1H) and 15-minute (M15) timeframes for entry confirmation. The price first sweeps an external liquidity level (PDH or PDL) and then provides an entry opportunity based on Market Structure Shift (MSS) and SMT divergence. Additionally, the entry should be positioned relative to the Midnight Open, meaning long entries should occur below the Midnight Open and short entries above it. 🟣 Bullish Twitter Model In a bullish setup, the price first sweeps the previous day’s low (PDL) and reaches an external liquidity level. Then, in the 1-hour timeframe (1H), a bullish Fair Value Gap (FVG) forms, which serves as the price target. To confirm the entry, a Market Structure Shift (MSS) in the 15-minute timeframe (M15) should be observed, signaling a trend reversal to the upside. Additionally, SMT divergence with correlated assets can indicate weakness in selling pressure. Under these conditions, a long position is taken below the Midnight Open, with a stop-loss placed at the lowest point of the recent bearish move. The price target for this trade is the FVG in the 1-hour timeframe. 🟣 Bearish Twitter Model In a bearish setup, the price first sweeps the previous day’s high (PDH) and reaches an external liquidity level. Then, in the 1-hour timeframe (1H), a bearish Fair Value Gap (FVG) is identified, serving as the trade target. To confirm entry, a Market Structure Shift (MSS) in the 15-minute timeframe (M15) should form, signaling a trend shift to the downside. If an SMT divergence is present, it can provide additional confirmation for the trade. Once these conditions are met, a short position is taken above the Midnight Open, with a stop-loss placed at the highest level of the recent bullish move. The trade's price target is the FVG in the 1-hour timeframe. 🔵 Settings Bar Back Check : Determining the return of candles to identify the CISD level. CISD Level Validity : CISD level validity period based on the number of candles. Daily Position : Determines whether only the first signal of the day is considered or if signals are evaluated throughout the entire day. Session : Specifies in which trading sessions the indicator will be active. Second Symbol : This setting allows you to select another asset for comparison with the primary asset. By default, "XAUUSD" (Gold) is set as the second symbol, but you can change it to any currency pair, stock, or cryptocurrency. For example, you can choose currency pairs like EUR/USD or GBP/USD to identify divergences between these two assets. Divergence Fractal Periods : This parameter defines the number of past candles to consider when identifying divergences. The default value is 2, but you can change it to suit your preferences. This setting allows you to detect divergences more accurately by selecting a greater number of candles. The indicator allows displaying sessions based on various time zones. The user can select one of the following options : UTC (Coordinated Universal Time) Local Time of the Session User’s Local Time Show Open Price : Displays the New York market opening price. Show PDH / PDL : Displays the previous day’s high and low to identify potential entry points. Show SMT Divergence : Displays lines and labels for bullish ("+SMT") and bearish ("-SMT") divergences. 🔵 Conclusion The Twitter Model ICT is an effective approach for analyzing and executing trades in financial markets, utilizing a combination of liquidity principles, market structure, and SMT confirmations to identify optimal entry and exit points. By analyzing the previous day’s high and low (PDH/PDL), Fair Value Gaps (FVG), and Market Structure Shift (MSS) in the 1H and M15 timeframes, traders can pinpoint liquidity-driven trade opportunities. Additionally, considering the Midnight Open level helps traders avoid random entries and ensures better trade placement. By applying this model, traders can interpret market movements based on liquidity flow and structural changes, allowing them to fine-tune their trading decisions with higher precision. Ultimately, the Twitter Model ICT provides a structured and logical approach for traders who seek to trade based on liquidity behavior and trend shifts in the market.
Pine Script®指標
由TFlab提供
5
MMXM ICT [TradingFinder] Market Maker Model PO3 CHoCH/CSID + FVG🔵 Introduction The MMXM Smart Money Reversal leverages key metrics such as SMT Divergence, Liquidity Sweep, HTF PD Array, Market Structure Shift (MSS) or (ChoCh), CISD, and Fair Value Gap (FVG) to identify critical turning points in the market. Designed for traders aiming to analyze the behavior of major market participants, this setup pinpoints strategic areas for making informed trading decisions. The document introduces the MMXM model, a trading strategy that identifies market maker activity to predict price movements. The model operates across five distinct stages: original consolidation, price run, smart money reversal, accumulation/distribution, and completion. This systematic approach allows traders to differentiate between buyside and sellside curves, offering a structured framework for interpreting price action. Market makers play a pivotal role in facilitating these movements by bridging liquidity gaps. They continuously quote bid (buy) and ask (sell) prices for assets, ensuring smooth trading conditions. By maintaining liquidity, market makers prevent scenarios where buyers are left without sellers and vice versa, making their activity a cornerstone of the MMXM strategy. SMT Divergence serves as the first signal of a potential trend reversal, arising from discrepancies between the movements of related assets or indices. This divergence is detected when two or more highly correlated assets or indices move in opposite directions, signaling a likely shift in market trends. Liquidity Sweep occurs when the market targets liquidity in specific zones through false price movements. This process allows major market participants to execute their orders efficiently by collecting the necessary liquidity to enter or exit positions. The HTF PD Array refers to premium and discount zones on higher timeframes. These zones highlight price levels where the market is in a premium (ideal for selling) or discount (ideal for buying). These areas are identified based on higher timeframe market behavior and guide traders toward lucrative opportunities. Market Structure Shift (MSS), also referred to as ChoCh, indicates a change in market structure, often marked by breaking key support or resistance levels. This shift confirms the directional movement of the market, signaling the start of a new trend. CISD (Change in State of Delivery) reflects a transition in price delivery mechanisms. Typically occurring after MSS, CISD confirms the continuation of price movement in the new direction. Fair Value Gap (FVG) represents zones where price imbalance exists between buyers and sellers. These gaps often act as price targets for filling, offering traders opportunities for entry or exit. By combining all these metrics, the Smart Money Reversal provides a comprehensive tool for analyzing market behavior and identifying key trading opportunities. It enables traders to anticipate the actions of major players and align their strategies accordingly. MMBM : MMSM : 🔵 How to Use The Smart Money Reversal operates in two primary states: MMBM (Market Maker Buy Model) and MMSM (Market Maker Sell Model). Each state highlights critical structural changes in market trends, focusing on liquidity behavior and price reactions at key levels to offer precise and effective trading opportunities. The MMXM model expands on this by identifying five distinct stages of market behavior: original consolidation, price run, smart money reversal, accumulation/distribution, and completion. These stages provide traders with a detailed roadmap for interpreting price action and anticipating market maker activity. 🟣 Market Maker Buy Model In the MMBM state, the market transitions from a bearish trend to a bullish trend. Initially, SMT Divergence between related assets or indices reveals weaknesses in the bearish trend. Subsequently, a Liquidity Sweep collects liquidity from lower levels through false breakouts. After this, the price reacts to discount zones identified in the HTF PD Array, where major market participants often execute buy orders. The market confirms the bullish trend with a Market Structure Shift (MSS) and a change in price delivery state (CISD). During this phase, an FVG emerges as a key trading opportunity. Traders can open long positions upon a pullback to this FVG zone, capitalizing on the bullish continuation. 🟣 Market Maker Sell Model In the MMSM state, the market shifts from a bullish trend to a bearish trend. Here, SMT Divergence highlights weaknesses in the bullish trend. A Liquidity Sweep then gathers liquidity from higher levels. The price reacts to premium zones identified in the HTF PD Array, where major sellers enter the market and reverse the price direction. A Market Structure Shift (MSS) and a change in delivery state (CISD) confirm the bearish trend. The FVG then acts as a target for the price. Traders can initiate short positions upon a pullback to this FVG zone, profiting from the bearish continuation. Market makers actively bridge liquidity gaps throughout these stages, quoting continuous bid and ask prices for assets. This ensures that trades are executed seamlessly, even during periods of low market participation, and supports the structured progression of the MMXM model. The price’s reaction to FVG zones in both states provides traders with opportunities to reduce risk and enhance precision. These pullbacks to FVG zones not only represent optimal entry points but also create avenues for maximizing returns with minimal risk. 🔵 Settings Higher TimeFrame PD Array : Selects the timeframe for identifying premium/discount arrays on higher timeframes. PD Array Period : Specifies the number of candles for identifying key swing points. ATR Coefficient Threshold : Defines the threshold for acceptable volatility based on ATR. Max Swing Back Method : Choose between analyzing all swings ("All") or a fixed number ("Custom"). Max Swing Back : Sets the maximum number of candles to consider for swing analysis (if "Custom" is selected). Second Symbol for SMT : Specifies the second asset or index for detecting SMT divergence. SMT Fractal Periods : Sets the number of candles required to identify SMT fractals. FVG Validity Period : Defines the validity duration for FVG zones. MSS Validity Period : Sets the validity duration for MSS zones. FVG Filter : Activates filtering for FVG zones based on width. FVG Filter Type : Selects the filtering level from "Very Aggressive" to "Very Defensive." Mitigation Level FVG : Determines the level within the FVG zone (proximal, 50%, or distal) that price reacts to. Demand FVG : Enables the display of demand FVG zones. Supply FVG : Enables the display of supply FVG zones. Zone Colors : Allows customization of colors for demand and supply FVG zones. Bottom Line & Label : Enables or disables the SMT divergence line and label from the bottom. Top Line & Label : Enables or disables the SMT divergence line and label from the top. Show All HTF Levels : Displays all premium/discount levels on higher timeframes. High/Low Levels : Activates the display of high/low levels. Color Options : Customizes the colors for high/low lines and labels. Show All MSS Levels : Enables display of all MSS zones. High/Low MSS Levels : Activates the display of high/low MSS levels. Color Options : Customizes the colors for MSS lines and labels. 🔵 Conclusion The Smart Money Reversal model represents one of the most advanced tools for technical analysis, enabling traders to identify critical market turning points. By leveraging metrics such as SMT Divergence, Liquidity Sweep, HTF PD Array, MSS, CISD, and FVG, traders can predict future price movements with precision. The price’s interaction with key zones such as PD Array and FVG, combined with pullbacks to imbalance areas, offers exceptional opportunities with favorable risk-to-reward ratios. This approach empowers traders to analyze the behavior of major market participants and adopt professional strategies for entry and exit. By employing this analytical framework, traders can reduce errors, make more informed decisions, and capitalize on profitable opportunities. The Smart Money Reversal focuses on liquidity behavior and structural changes, making it an indispensable tool for financial market success.
Pine Script®指標
由TFlab提供
14
[TTM] ICT Key Levels🌟 Overview 🌟 This tool highlights key price levels, such as highs, lows, and session opens, that can influence market moves. Based on ICT concepts, these levels help traders spot potential areas for market reversals or trend continuations. 🌟 Key Levels 🌟 🔹 Week Open (00:00 EST) Marks the start of the trading week. This level helps track price direction and is useful for framing the Weekly candle formation using ICT’s Power of 3. 🔹 Midnight Open (00:00 EST) The Midnight Open (MNOP) marks the start of the new trading day. Price often retraces to this level for liquidity grabs, setting up larger moves in the daily trend. It's also key for framing the Daily Power of 3 and spotting possible market manipulation. 🔹 New York Stock Exchange Open (09:30 EST) The NYSE Open is a major liquidity event, where price seeks liquidity from earlier in the day, like stop hunts or retracements to the London or Midnight Open. This time often brings reversals or trend continuations as volatility increases. 🔹 Previous Day High/Low These levels show where liquidity rests, often serving as targets for price revisits, ideal for reversals or continuation trades. 🔹 Previous Week High/Low Similar to daily levels but on a larger scale. They help identify swing trades and track broader market trends. 🔹 Previous Month High/Low These monthly levels are important for long-term traders, as price often aims to clear them before setting new trends or market cycles. Happy Trading! TheTickMagnet
Pine Script®指標
由TheTickMagnet提供
20
Custom Opening Price Levels (PO3)This indicator is designed to assist the trader in identifying the Power of Three through the opens of the candles. ------------------------- The PO3 is a concept introduced by ICT. First, you need to have a directional bias for the month or the specific candle in question. It should be of high time frame (HTF BIAS). At the open of the specific candle, the market will generate interest in the direction opposite to the HTF BIAS, accumulating positions. It will then manipulate the positions of less informed traders to generate the necessary liquidity to fill informed operators positions. Finally, positions are distributed in favor of the bias. ------------------------- The PO3 is a phenomenon that repeats across all timeframes. This indicator is highly customizable and allows the user to choose from a range of timeframes: 3 months, 1 month, 1 week, 1 day, and 3 hours. The indicator displays the last 3 opens for the selected period. ------------------------- The script is open-source, so feel free to add more timeframes or open levels if you have coding skills.
Pine Script®指標
由NarcotikT提供
3
ICT Power Of Three | Flux Charts💎 GENERAL OVERVIEW Introducing our new ICT Power Of Three Indicator! This indicator is built around the ICT's "Power Of Three" strategy. This strategy makes use of these 3 key smart money concepts : Accumulation, Manipulation and Distribution. Each step is explained in detail within this write-up. For more information about the process, check the "HOW DOES IT WORK" section. Features of the new ICT Power Of Three Indicator : Implementation of ICT's Power Of Three Strategy Different Algorithm Modes Customizable Execution Settings Customizable Backtesting Dashboard Alerts for Buy, Sell, TP & SL Signals 📌 HOW DOES IT WORK ? The "Power Of Three" comes from these three keywords "Accumulation, Manipulation and Distribution". Here is a brief explanation of each keyword : Accumulation -> Accumulation phase is when the smart money accumulate their positions in a fixed range. This phase indicates price stability, generally meaning that the price constantly switches between up & down trend between a low and a high pivot point. When the indicator detects an accumulation zone, the Power Of Three strategy begins. Manipulation -> When the smart money needs to increase their position sizes, they need retail traders' positions for liquidity. So, they manipulate the market into the opposite direction of their intended direction. This will result in retail traders opening positions the way that the smart money intended them to do, creating liquidity. After this step, the real move that the smart money intended begins. Distribution -> This is when the real intention of the smart money comes into action. With the new liquidity thanks to the manipulation phase, the smart money add their positions towards the opposite direction of the retail mindset. The purpose of this indicator is to detect the accumulation and manipulation phases, and help the trader move towards the same direction as the smart money for their trades. Detection Methods Of The Indicator : Accumulation -> The indicator detects accumulation zones as explained step-by-step : 1. Draw two lines from the lowest point and the highest point of the latest X bars. 2. If the (high line - low line) is lower than Average True Range (ATR) * accumulationConstant 3. After the condition is validated, an accumulation zone is detected. The accumulation zone will be invalidated and manipulation phase will begin when the range is broken. Manipulation -> If the accumulation range is broken, check if the current bar closes / wicks above the (high line + ATR * manipulationConstant) or below the (low line - ATR * manipulationConstant). If the condition is met, the indicator detects a manipulation zone. Distribution -> The purpose of this indicator is to try to foresee the distribution zone, so instead of a detection, after the manipulation zone is detected the indicator automatically create a "shadow" distribution zone towards the opposite direction of the freshly detected manipulation zone. This shadow distribution zone comes with a take-profit and stop-loss layout, customizable by the trader in the settings. The X bars, accumulationConstant and manipulationConstant are subject to change with the "Algorithm Mode" setting. Read the "Settings" section for more information. This indicator follows these steps and inform you step by step by plotting them in your chart. 🚩UNIQUENESS This indicator is an all-in-one suite for the ICT's Power Of Three concept. It's capable of plotting the strategy, giving signals, a backtesting dashboard and alerts feature. Different and customizable algorithm modes will help the trader fine-tune the indicator for the asset they are currently trading. The backtesting dashboard allows you to see how your settings perform in the current ticker. You can also set up alerts to get informed when the strategy is executable for different tickers. ⚙️SETTINGS 1. General Configuration Algorithm Mode -> The indicator offers 3 different detection algorithm modes according to your needs. Here is the explanation of each mode. a) Small Manipulation This mode has the default bar length for the accumulation detection, but a lower manipulation constant, meaning that slighter imbalances in the price action can be detected as manipulation. This setting can be useful on tickers that have lower liquidity, thus can be manipulated easier. b) Big Manipulation This mode has the default bar length for the accumulation detection, but a higher manipulation constant, meaning that heavier imbalances on the price action are required in order to detect manipulation zones. This setting can be useful on tickers that have higher liquidity, thus can be manipulated harder. c) Short Accumulation This mode has a ~70% lower bar length requirement for accumulation zone detection, and the default manipulation constant. This setting can be useful on tickers that are highly volatile and do not enter accumulation phases too often. Breakout Method -> If "Close" is selected, bar close price will be taken into calculation when Accumulation & Manipulation zone invalidation. If "Wick" is selected, a wick will be enough to validate the corresponding zone. 2. TP / SL TP / SL Method -> If "Fixed" is selected, you can adjust the TP / SL ratios from the settings below. If "Dynamic" is selected, the TP / SL zones will be auto-determined by the algorithm. Risk -> The risk you're willing to take if "Dynamic" TP / SL Method is selected. Higher risk usually means a better winrate at the cost of losing more if the strategy fails. This setting is has a crucial effect on the performance of the indicator, as different tickers may have different volatility so the indicator may have increased performance when this setting is correctly adjusted. 3. Visuals Show Zones -> Enables / Disables rendering of Accumulation (yellow) and Manipulation (red) zones.
Pine Script®指標
由fluxchart提供
36
AMDX/XAMD indicatorThe AMDX/XAMD indicator is designed to highlight specific trading sessions on the chart using distinct colors and optional vertical lines. Users can choose between two session types, AMDX or XAMD, and customize the visual appearance of the sessions. This tool is particularly useful for traders who want to analyze market behavior during different trading periods. Meaning of AMDX: A: Accumulation M: Manipulation D: Distribution X: Continuation Or Reversal Features: Session Highlighting: AMDX Sessions: Split into four segments - A, M, D, X. XAMD Sessions: Split into four segments - X, A, M, D. Customizable Colors: Choose individual colors for each session (A, M, D, X). Adjust the transparency of the session boxes for better visual integration with the chart. Drawing Styles: Box Style: Draws colored boxes around the session ranges. Line Style: Draws vertical lines at session start and end times. Vertical Lines: Option to enable or disable vertical lines at session boundaries. Customizable line style: Solid, Dotted, or Dashed. Session Labels: Automatically labels each session for easy identification. Customization Options: Session Type: Select between AMDX and XAMD session types. Colors: Set custom colors for each session and vertical lines. Border Width: Adjust the width of the session box borders. Transparency: Control the transparency level of the session boxes. Drawing Style: Choose between Box and Line styles for session representation. Vertical Lines: Enable or disable vertical lines and select the line style. How It Works: The indicator calculates the start and end times for each session based on the selected session type (AMDX or XAMD). It then draws either boxes or lines to highlight these sessions on the chart. The indicator also includes options to draw vertical lines at the session boundaries and labels each session with a corresponding letter (A, M, D, X). Use Cases: Market Session Analysis: Easily identify and analyze market behavior during different trading sessions. Intraday Trading: Helps intraday traders to focus on specific time segments of the trading day. Visual Segmentation: Provides a clear visual segmentation of the trading day, aiding in better decision-making. Times for AMDX/XAMD session: A Session: 18:00 (previous day) to 03:00 (current day) M Session: 03:00 to 09:00 D Session: 09:00 to 12:00 X Session: 12:00 to 18:00 Time for the XAMD session : X Session: 18:00 (previous day) to 00:00 (current day) A Session: 00:00 to 09:00 M Session: 09:00 to 12:00 D Session: 12:00 to 18:00
Pine Script®指標
由Noxthinmarket提供
3
HTF Candle ProjectionsThe HTF Candle Projections indicator shows a number of candles from a higher time frame (HTF) projected to the right of the candles in the current timeframe. This can be very useful if you want to analyze two different timeframes without the need to switching between the different timeframes. This indicator is highly inspired by the HTF Power of Three indicator by @toodegrees but is fully free and open source, it also have support for showing more than just one candle in the projection. It is also inspired by the HTF Candle Insights (Expo) indicator by @Zeiierman but differ in the way that it update the HTF candles in real time and also have support for showing Open/High/Low projections that also updates in real time. This indicator is released under TradingViews default license ( Mozilla Public License 2.0 )
Pine Script®指標
由modhelius提供
49
90 Minute Cycles + MTFCredit goes to LuxAlgo for the inspiration from 'Sessions' which allowed users to analyse specific price movements within a user defined period with tools such as trendline, mean and vwap. Settings Sessions Enable Session: Allows to enable or disable all associated elements with a specific user set session. Session Time: Opening and closing times of the user set session in the hh:mm format. Range: Highlights the associated session range on the chart. Ranges Settings Range Area colour: Set each range to a specific colour. Range Label: Shows the session label at the mid-point of the session interval. Usage By breaking 24hrs in quarters, starting with an Asian range of 18:00 NY time you can visualise the principles of Accumulation, Manipulation, Distribution and Rebalance. Know as AMD or PO3 (Power of Three), the principle is that the Manipulation phase will break above or below the Accumulation, before moving in an apposing direction and then rebalancing. This only works when there is a higher timeframe PD array or liquidity to support an apposing move. Further to the daily quarters, each one can then be broken down again into 90min cycles. Again, each represents AMD, allowing the user an opportunity to watch for reversals during the 90min manipulation phase. Note: Ensure the Asian Cycle always begins at 18:00 NY time. The example shows that the 90min cycle occurs, followed by an apposing move away in price action Here is the Daily cycle, highlighting the Manipulation phase. Enjoy!
Pine Script®指標
由HandlesHandled提供
33