Amazing Crossover System - 100+ pips per day!I got the main concept for this system on another site. While I have made one important change, I must stress that the heart of this system was created by someone else! We must give credit where credit is due!
Y'all know baby pips. @ForexPhantom published about this system and did both back and forward test around 10 years ago.
I found it on the sit and now I put it to code to see how it performs. I assume 10 points spread for every trade. I use Renesource or AxiTrader to get the low spreads.
There are 2 mods, the single trades and constant trading on the direction.
Main concept
Indicators
5 EMA -- YELLOW
10 EMA -- RED
RSI (10 - Apply to Median Price: HL/2) -- One level at 50.
TIME FRAME
1 Hour Only (very important!)
PAIRS
Virtually any pair seems to work as this is strictly technical analysis.
I recommend sticking to the main currencies and avoiding cross currencies (just his preference).
WHEN TO ENTER A TRADE
Enter LONG when the Yellow EMA crosses the Red EMA from underneath.
RSI must be approaching 50 from the BOTTOM and cross 50 to warrant entry.
Enter SHORT when the Yellow EMA crosses the Red EMA from the top.
RSI must be approaching 50 from the TOP and cross 50 to warrant entry.
I've attached a picture which demonstrates all these conditions.
That's it!
f.bpcdn.co
在腳本中搜尋"富时中国50期指"
MFIww MFI/RSI_v2[wozdux]A new version of the indicator Mfi_v2. Added new control parameters.
tt - the averaging period of the volume.
Len - the period for calculating the MPI.
nn-averaging period MFI (blue line). level-critical levels from below and above (black horizontal lines).
Level 0 or 50 - switch between different histogram views with the middle at either level 50 or level 0.
key level-key to remove black critical levels.
key ema (MFI, nn) - key to remove mfi averaging (blue line).
key color-key to remove histogram coloring.
key colomns a-line - key switching modes represent the mfi histrogram or line.
---------------------------
Новая версия индикатора MFIww_v2. Добавлены новые управляющие параметры.
tt- период усреднения объема.
Len - период вычисления MFI.
nn- период усреднения MFI (голубая линия).
level- критические уровни снизу и сверху (черные горизонтальные линии).
Level 0 or 50 - переключение между разными представлениями гистрограммы с серединой либо на уровне 50 , либо на уровне 0.
key level- ключ убрать черные критические уровни.
key ema(mfi,nn) - ключ убрать усреднение mfi (голубая линия).
key color- ключ убрать расцветку гистрограммы.
key colomns-line - ключ переключения режимов представления mfi гистрограммой или линией.
GoTiT|Simple Auto Fib v1.0Simple Auto Fib!
Notes:
1. Always set the trend manually! Don't rely on the auto trend detection.
2. The first parameter Length sets the number of candles back (left) to search for highs and lows from the current candle.
3. The High Offset parameter sets the number of candles back (left) to ignore/skip before searching for highs.
4. The Low Offset parameter sets the number of candles back (left) to ignore/skip before searching for lows.
5. The offset parameters change the behavior of the Length parameter.
Example 1:
Length = 100
High Offset = 0
Low Offset = 0
This is the default behavior, and the search for highs and lows occurs on the last 100 candles.
Example 2:
Length = 50
High Offset = 20 (Ignore the last 20 candles, and search for highs starting at candle 21 to 71 (or 50 candles back)
Low Offset = 15 (Ignore the last 15 candles, and search for lows starting at candle 16 to 66 (or 50 candles back)
In example 2, search starts on candle 21 for highs, and candle 16 for lows and extends 50 candles further back from there.
6. The Trend Detection parameter sets the number of candles back (left) to use in the trend calculations. Larger values give better "marco trend" detection. Smaller values give better "micro trend" detection. See note #1.
7. The white fib line is fib0. Assuming you correctly set the trend manually (or the trend is auto detected correctly), in a downtrend fib0 should be bellow the red fib line, and in an uptrend fib0 should be above the red fib line.
MACD + Stochastic + RSI (Long + Short)My strategy uses a combination of three indicators MACD Stochastic RSI .
The Idea is to GO LONG when ( MACD > Signal and RSI > 50 and Stochastic > 50) occures at the same time
and GO SHORT when ( MACD < Signal and RSI < 50 and Stochastic < 50)
This strategy works well on futures and stocks especially during market breaking up after consolidation
The best results are on Daily charts , so its NOT a scalping strategy. But it can work also on 1H charts.
The strategy does not have any stops and profit targets, so we can take all the market can give us at the moment.
The exit point only when MACD goes under/over Signal line
Its Preformance is quite stable.
So, use it, trade it.
If it will help you to imprive your trading results, please donate me
BTC: 12kd1F8buWisUBdq27BBwRkUvzW7Ey3og5
Trend Lines and MoreMulti-Indicator consisting of several useful indicators in a single package.
TREND LINES
-By default the 20 SMA and 50 SMA are shown.
-Use "MOVING AVERAGE TYPE" to select SMA, EMA, Double-EMA, Triple-EMA, or Hull.
-Use "50 MA TREND COLOR" to have the 50 turn green/red for uptrend/downtrend.
-Use "DAILY SOURCE ONLY" to always show daily averages regardless of timeframe.
-Use "SHOW LONG MA" to also include 100, 150, and 200 moving averages.
-Use "SHOW MARKERS" to show a small colored marker identifying which line is which.
OTHER INDICATORS
-You can show Bollinger Bands and Parabolic SAR.
-You can highlight key reversal times (9:50-10:10 and 14:40-15:00).
-You can show price offset markers, where was the price "n" periods ago.
That last one is useful to show the level of prices which are about to "fall off" the moving average
and be replaced with current price. So for example, if current price is significantly below the
200-days-ago price, you can gauge the difficulty for the 200 MA to start climbing again.
Multi SMA EMA WMA HMA BB (4x3 MAs Bollinger Bands) Pro MTF - RRBMulti SMA EMA WMA HMA 4x3 Moving Averages with Bollinger Bands Pro MTF by RagingRocketBull 2018
Version 1.0
This indicator shows multiple MAs of any type SMA EMA WMA HMA etc with BB and MTF support, can show MAs as dynamically moving levels.
There are 4 MA groups + 1 BB group. You can assign any type/timeframe combo to a group, for example:
- EMAs 50,100,200 x H1, H4, D1, W1 (4 TFs x 3 MAs x 1 type)
- EMAs 8,13,21,55,100,200 x M15, H1 (2 TFs x 6 MAs x 1 type)
- D1 EMAs and SMAs 12,26,50,100,200,400 (1 TF x 6 MAs x 2 types)
- H1 WMAs 7,77,231; H4 HMAs 50,100,200; D1 EMAs 144,169,233; W1 SMAs 50,100,200 (4 TFs x 3 MAs x 4 types)
- +1 extra MA type/timeframe for BB
compile time: 25-30 sec
full redraw time after parameter change in UI: 3 sec
There are several versions: Simple, MTF, Pro MTF, Advanced MTF and Ultimate MTF. This is the Pro MTF version. The Differences are listed below. All versions have BB
- Simple: you have 2 groups of MAs that can be assigned any type (5+5)
- MTF: +2 custom Timeframes for each group (2x5 MTF)
- Pro MTF: +4 custom Timeframes for each group (4x3 MTF), MA levels and show max bars back options
- Advanced MTF: +2 extra MAs/group (4x5 MTF), custom Ticker/Symbol, backreferences for type, TF and MA lengths in UI
- Ultimate MTF: +individual settings for each MA, custom Ticker/Symbols
Features:
- 4x3 = 12 MAs of any type including Hull Moving Average (HMA)
- 4x MTF groups with step line smoothing
- BB +1 extra TF/type for BB MAs
- 12 MA levels with adjustable group offsets, indents and shift
- show max bars back
- you can show/hide both groups of MAs/levels and individual MAs
Notes:
1. based on 3EmaBB, uses plot*, barssince and security functions
2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private version
3. Levels = trackprice implementation
4. Show Max Bars Back = show_last implementation
5. uses timeframe textbox instead of input resolution to allow for 120 240 and other custom TFs. Also supports TFs in hours: 2H or H2
6. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params
7. Smoothing is applied by default for visual aesthetics on MTF. To use exact ma mtf values (lines with stair stepping) - disable it
MTF Notes:
- uses simple timeframe textbox instead of input resolution dropdown to allow for 120, 240 and other custom TFs, also supports timeframes in H: 2H, H2
- Groups that are not assigned a Custom TF will use Current Timeframe (0).
- MTF will work for any MA type assigned to the group
- MTF works both ways: you can display a higher TF MA/BB on a lower TF or a lower TF MA/BB on a higher TF.
- MTF MA values are normally aligned at the boundary of their native timeframe. This produces stair stepping when a higher TF MA is viewed on a lower TF.
Therefore X Y Point Density/Smoothing is applied by default on MA MTF for visual aesthetics. Set both to 0 to disable and see exact ma mtf values (lines with stair stepping and original mtf alignment).
- Smoothing is disabled for BB MTF bands because fill doesn't work with smoothed MAs after duplicate values are replaced with na.
- MTF MA Value fluctuation is possible on the current bar due to default security lookahead
Smoothing:
- X,Y == 0 - X,Y smoothing disabled (stair stepping on high TFs)
- X == 0, Y > 0 - X,Y smoothing applied to all TFs
- Y == 0, X > 0 - X smoothing applied to all TFs < deltaX_max_tf, Y smoothing disabled
- X > 0, Y > 0 - Y smoothing applied to all TFs, then X smoothing applied to all TFs < deltaX_max_tf
X Smoothing with Y == 0 - shows only every deltaX-th point starting from the first bar.
X Smoothing with Y > 0 - shows only every deltaX-th point starting from the last shown Y point, essentially filling huge gaps remaining after Y Smoothing with points and preserving the curve's general shape
X Smoothing on high TFs with already scarce points produces weird curve shapes, it works best only on high density lower TFs
Y Smoothing reduces points on all TFs, removes adjacent points with prices within deltaY, while preserving the smaller curve details.
A combination of X,Y produces the most accurate smoothing. Higher delta value - larger range, more points removed.
Show Max Bars Back:
- can't set plot show_last from input -> implemented using a timenow based range check
- you can't delete/modify history once plotted, so essentially it just sets a start point for plotting (from num_bars bars back) that works only in realtime mode (not in replay)
Levels:
You can plot current MA value using plot trackprice=true or by checking Show Price Line in Style. Problem is:
- you can only change color (not the dashed line style, width), have both ma + price line (not just the line), and it's full screen wide
- you can't set plot trackprice from input => implemented using plotshape/plotchar with fixed text labels serving as levels
- there's no other way of creating a dynamic level: hline, plot, offset - nothing else works.
- you can't plot a text var - all text strings must be constants, so you can't change the style, width and text labels without recompiling.
- from input you can only adjust offset, indent and shift for each level group, and change color
- the dot below each level line is the exact MA value. If you want just the line swap plotshape with plotchar, recompile and save as your private version, adjust Y shift.
To speed up redraw times: reduce last_bars to ~2000, recompile and use as your own private version
Pinescript is a rudimentary language (should be called Painscript instead) that can basically only plot data. You can't do much else. Please see the code for tips and hints.
Certain things just can't be done or require shady workarounds and weeks of testing trying to resolve weird node.js compiler errors.
Feel free to learn from/reuse/change the code as needed and use as your own private version. See comments in code. Good Luck!
Simple_longshort_signalsLong Entry
Criteria:
1) Green candle close above 50MA
2) Green candle close above 20MA
3) MA of RSI(14) is cross upward 50
Result: displays green up arrow
Long Exit
Criteria:
1) Three red candles in a row
2) Any candle close bellow 20MA
3) MA of RSI(14) cross downward 50
Result: displays green diamond
Short Entry
1) Red candle close bellow 50MA
2) Red candle close bellow 20MA
3) MA of RSI(14) is cross downward 50
Result: displays red down arrow
Short Exit
Criteria
1) Three green candles in a row
2) Any candle close above 20MA
3) MA of RSI(14) is cross upward 50
Result: displays red diamond
Noro's Double RSI Strategy 1.0Strategy uses only 2 RSI indicators. Slow and fast.
If slow RSI > 50 and fast RSI < 50 - to open a long-position
If slow RSI < 50 and fast RSI > 50 - to open a short-position
If the long-position is open and a candle green - to close a long-position
if the short-position is open and a candle red - to close a short-position
GoldenCross by PuffyThis is a simple trading strategy that seeks the Golden Cross and Death Cross on the 4HR chart. The fast moving indicator in this strategy is the EMA 50 and the slow moving indicator is the EMA 200. When the EMA 50 crosses over the EMA 200 the strategy indicates a buy. When the EMA 50 crosses below the EMA 200 the strategy indicates a sell. This strategy averages trades in the 40 - 50 day range and as such should not be used with heavy leverage.
Exponential Moving Average (Set of 3) [Krypt] + 13/34 EMAsI took Krypt's script and essentially added on to it.
the 20/50/100/200 EMAs should be used together as support and resistance as normal.
Wait for price to break 200 EMA
Wait for 50 EMA to cross 200 EMA
Wait for pullback to 50 EMA to open position
20 and 100 EMAs are for extra information about moving support and resistance
and 13/34 EMAs should be used in conjunction
When 13 EMA crosses 34 EMA, open position
When price gets far from 13/34, close position (because price will attempt to revert back to mean)
This is better for scalping and swing trades than the 20/50/100/200 setup.
Twitter: @AzorAhai06
MTF EMAExponential Moving Average indicator that can be configured to display different timeframe EMA's.
Timeframe is set in minutes. Max timeframe currently is the daily (1440 minutes). Any value higher than 1440 will result in no plot.
Examples:
Daily 50 EMA plotted on 4H chart
4H 50 EMA and Daily 50 EMA plotted on 1H chart
Can also work in reverse if needed.
Example, Daily 50 EMA plotted on Weekly Chart
Price vs VolImproved version of OBV/price (this one actually works)
Both lines show where price is going relative to volume metrics (one line uses OBV, the other uses accumulation/distribution).
Green and above 50 means price is rising faster then buying volume
Red and below 50 means price is falling faster then selling volume
you can add smoothing in the controls and color will go according to raw (even if smoothing goes above/below 50)
under the hood: changes price, OBV and AD to RSI for comparability, calculates the difference between price and the others, then an RSI on the result to create an <50< style indicator.
this script replaces the previouse from:
JW Clean Adaptive Channel//@version=5
indicator("JW Clean Adaptive Channel", overlay=true)
// Inputs
emaFast = input.int(20, "EMA Fast")
emaMid = input.int(50, "EMA Mid")
emaSlow = input.int(200, "EMA Slow")
atrLen = input.int(14, "ATR Length")
regLen = input.int(100, "Regression Window")
multATR = input.float(2.0, "Channel Width x ATR", step=0.1)
baseATR = input.int(50, "ATR Baseline")
volCap = input.float(2.5, "Max Vol Mult", step=0.1)
// EMAs
ema20 = ta.ema(close, emaFast)
ema50 = ta.ema(close, emaMid)
ema200 = ta.ema(close, emaSlow)
plot(ema20, "EMA 20", color=color.lime)
plot(ema50, "EMA 50", color=color.yellow)
plot(ema200, "EMA 200", color=color.orange, linewidth=2)
// Adaptive regression channel
atr = ta.atr(atrLen)
bAtr = ta.sma(atr, baseATR)
vRat = bAtr == 0.0 ? 1.0 : math.min(atr / bAtr, volCap)
width = atr * multATR * vRat
basis = ta.linreg(close, regLen, 0)
upper = basis + width
lower = basis - width
slope = basis - basis
chanColor = slope > 0 ? color.lime : slope < 0 ? color.red : color.gray
pU = plot(upper, "Upper", color=chanColor)
pL = plot(lower, "Lower", color=chanColor)
pB = plot(basis, "Basis", color=color.gray)
fill(pU, pL, color=color.new(chanColor, 85))
// Candle and background color
ribbonBull = ema20 > ema50 and ema50 > ema200
ribbonBear = ema20 < ema50 and ema50 < ema200
barcolor(ribbonBull ? color.lime : ribbonBear ? color.red : na)
bgcolor(slope > 0 ? color.new(color.green, 85) : slope < 0 ? color.new(color.red, 85) : na)
// MACD buy/sell markers
= ta.macd(close, 12, 26, 9)
buySig = ta.crossover(macdLine, sigLine) and slope > 0
sellSig = ta.crossunder(macdLine, sigLine) and slope < 0
plotshape(buySig, title="Buy", style=shape.triangleup, color=color.lime, location=location.belowbar, size=size.tiny)
plotshape(sellSig, title="Sell", style=shape.triangledown, color=color.red, location=location.abovebar, size=size.tiny)
// Trend strength label (single-line calls; no dangling commas)
strength = slope * vRat * 1000.0
string tText = "Sideways"
color tCol = color.gray
if strength > 2
tText := "Strong Uptrend"
tCol := color.lime
else if strength > 0.5
tText := "Weak Uptrend"
tCol := color.new(color.lime, 40)
else if strength < -2
tText := "Strong Downtrend"
tCol := color.red
else if strength < -0.5
tText := "Weak Downtrend"
tCol := color.new(color.red, 40)
var label tLbl = na
if barstate.islast
if not na(tLbl)
label.delete(tLbl)
tLbl := label.new(x=bar_index, y=high, text=tText, style=label.style_label_right, textcolor=color.white, color=tCol, size=size.normal, yloc=yloc.price)
// 10-day breakout alerts
hi10 = ta.highest(high, 10)
lo10 = ta.lowest(low, 10)
alertcondition(close > hi10, title="10-Day High Break", message="{{ticker}} 10D HIGH @ {{close}}")
alertcondition(close < lo10, title="10-Day Low Break", message="{{ticker}} 10D LOW @ {{close}}")
alertcondition(buySig, title="Buy Alert", message="BUY {{ticker}} @ {{close}}")
alertcondition(sellSig, title="Sell Alert", message="SELL {{ticker}} @ {{close}}")
15-Min RSI Scalper [SwissAlgo]15-Min RSI Scalper
Tracks RSI Momentum Loss and Gain to Generate Signals
-------------------------------------------------------
WHAT THIS INDICATOR CALCULATES
This indicator attempts to identify RSI directional changes (RSI momentum) using a step-by-step "ladder" method. It reads RSI(14) from the next higher timeframe relative to your chart. On a 15-minute chart, it uses 1-hour RSI. On a 5-minute chart, it uses 15-minute RSI, and so on.
How the ladder logic works:
The indicator doesn't track RSI all the time. It only starts tracking when RSI crosses into potentially extreme territory (these are called "events" in the code):
For sell signals : when RSI crosses above a dynamic upper threshold (typically between 60-80, calculated as the 90th percentile of recent RSI)
For buy signals : when RSI crosses below a dynamic lower threshold (typically between 20-40, calculated as the 10th percentile of recent RSI)
Once tracking begins, RSI movement is divided into 2-point steps (boxes). The indicator counts how many boxes RSI climbs or falls.
A signal generates only when:
RSI reverses direction by at least 2 boxes (4 RSI points) from its extreme
RSI holds that reversal for 3 consecutive confirmed bars
Example: Dynamic threshold is at 68. RSI crosses above 68 → tracking starts. RSI climbs to 76 (4 boxes up). Then it drops back to 72 and stays below that level for 3 bars → sell signal prints. The buy signal works the same way in reverse.
-------------------------------------------------------
SIGNAL GENERATION METHODOLOGY
Sell Signal (Red Triangle)
RSI crosses above a dynamic start level (calculated as the 90th percentile of the last 1000 bars, constrained between 60-80)
Indicator tracks upward progression in 2-point boxes
RSI reverses and drops below a boundary 2 boxes below the highest box reached
RSI remains below that boundary for 3 confirmed bars
Red triangle plots above price
Reset condition: RSI returns below 50
Buy Signal (Green Triangle)
RSI crosses below a dynamic start level (10th percentile of last 1000 bars, constrained between 20-40)
Indicator tracks downward progression in 2-point boxes
RSI reverses and rises above a boundary 2 boxes above the lowest box reached
RSI remains above that boundary for 3 confirmed bars
Green triangle plots below price
Reset condition: RSI returns above 50
-------------------------------------------------------
TECHNICAL PARAMETERS
All parameters are hardcoded:
RSI Period: 14
Box Size: 2 RSI points
Reversal Threshold: 2 boxes (4 RSI points)
Confirmation Period: 3 bars
Reset Level: RSI 50
Sell Start Range: 60-80 (dynamic)
Buy Start Range: 20-40 (dynamic)
Lookback for Percentile: 1000 bars
Note: Since the code is open source, users can modify these hardcoded values directly in the script to adjust sensitivity. For example, increasing the confirmation period from 3 to 5 bars will produce fewer but more conservative signals. Decreasing the box size from 2 to 1 will make the indicator more responsive to smaller RSI movements.
-------------------------------------------------------
KEY FEATURES
Automatic Higher Timeframe RSI
When applied to a 15-minute chart, the indicator automatically reads 1-hour RSI data. This is the next standard timeframe above 15 minutes in the indicator's logic.
Dynamic Adaptive Start Levels
Sell signals use the 90th percentile of RSI over the last 1000 bars, constrained between 60-80. Buy signals use the 10th percentile, constrained between 20-40. These thresholds recalculate on each bar based on recent data.
Ladder Box System
RSI movements are tracked in 2-point boxes. The indicator requires a 2-box reversal followed by 3 consecutive bars maintaining that reversal before generating a signal.
Dual Signal Output
Red down-triangles plot above price when the sell signal conditions are met. Green up-triangles plot below the price when buy signal conditions are met.
-------------------------------------------------------
REPAINTING
This indicator does not repaint. All calculations use "barstate.isconfirmed" to ensure signals appear only on closed bars. The request.security() call uses lookahead=barmerge.lookahead_off to prevent forward-looking bias.
-------------------------------------------------------
INTENDED CHART TIMEFRAME
This indicator is designed for use on 15-minute charts. The visual reminder table at the top of the chart indicates this requirement.
On a 15-minute chart:
RSI data comes from the 1-hour timeframe
Signals reflect 1-hour momentum shifts
3-bar confirmation equals 45 minutes of price action
Using it on other timeframes will change the higher timeframe RSI source and may produce different behavior.
-------------------------------------------------------
WHAT THIS INDICATOR DOES NOT DO
Does not predict future price movements
Does not provide entry or exit advice
Does not guarantee profitable trades
Does not replace comprehensive technical analysis
Does not account for fundamental factors, news events, or market structure
Does not adapt to all market conditions equally
-------------------------------------------------------
EDUCATIONAL USE
This indicator demonstrates one approach to momentum reversal detection using:
Multi-timeframe analysis
Adaptive thresholds via percentile calculation
Step-wise momentum tracking
Multi-bar confirmation logic
It is designed as a technical study, not a trading system. Signals represent calculated conditions based on RSI behavior, not trade recommendations. Always do your own analysis before taking market positions.
-------------------------------------------------------
RISK DISCLOSURE
Trading involves substantial risk of loss. This indicator:
Is for educational and informational purposes only
Does not constitute financial, investment, or trading advice
Should not be used as the sole basis for trading decisions
Has not been tested across all market conditions
May produce false signals, late signals, or no signals in certain conditions
Past performance of any indicator does not predict future results. Users must conduct their own analysis and risk assessment before making trading decisions. Always use proper risk management, including stop losses and position sizing appropriate to your account and risk tolerance.
MIT LICENSE
This code is open source and provided as-is without warranties of any kind. You may use, modify, and distribute it freely under the MIT License.
BTC 5-MA Multi Cross Strategy By Hardik Prajapati Ai TradelabThis strategy is built around the five most powerful and commonly used moving averages in crypto trading — 5, 20, 50, 100, and 200-period SMAs (Simple Moving Averages) — applied on a 1-hour Bitcoin chart.
Core Idea:
The strategy aims to identify strong bullish trends by confirming when the price action crosses above all key moving averages. This alignment of multiple MAs indicates momentum shift and helps filter out false breakouts.
⸻
⚙️ How It Works:
1. Calculates 5 Moving Averages:
• 5 MA → Short-term momentum (fastest signal)
• 20 MA → Near-term trend confirmation
• 50 MA → Mid-term trend filter
• 100 MA → Long-term trend foundation
• 200 MA → Macro-trend direction (strongest support/resistance)
2. Buy Condition (Entry):
• A Buy is triggered when:
• The price crosses above the 5 MA, and
• The closing price remains above all other MAs (20, 50, 100, 200)
This signals that momentum is aligned across all time horizons — a strong uptrend confirmation.
3. Sell Condition (Exit):
• The position is closed when price crosses below the 20 MA, showing weakness in short-term momentum.
4. Visual Signals:
• 🟢 BUY triangle below candles → Entry signal
• 🔴 SELL triangle above candles → Exit signal
• Colored MAs plotted for trend clarity.
⸻
📈 Recommended Usage:
• Chart: BTC/USDT
• Timeframe: 1 Hour
• Type: Trend-following crossover strategy
• Ideal for: Identifying major breakout moves and confirming trend reversals.
⸻
⚠️ Notes:
• This script is meant for educational and backtesting purposes only.
• Always apply additional confirmation tools (like RSI, Volume, or VIX-style filters) before live trading.
• Works best during trending markets; may produce whipsaws in sideways zones.
Total Info Indicator (Public)# Total Info Indicator (TII)
A one-stop TradingView dashboard that overlays key market info on your chart and (optionally) prints **breakout warnings/confirmations** and **Smart SELL** signals. It shows MAs, ATR & stop-loss, RSI/CCI, earnings countdown, and a volume block that compares **today’s volume (so far)** vs a **20-day daily average (excluding today)**.
---
## Features
- **Overlay Dashboard (watermark table)**
- **Name & Market Cap**, **Ticker & Timeframe**, **Sector/Industry**
- **ATR (14)** and **ATR%** with traffic-light emoji
- **MA status** (Above/Below for 20/50/150/200)
- **Stop-loss** value + risk emoji
- **Earnings**: days remaining (if data available)
- **RSI (14)** + trend arrow; **CCI (14)** with interpretation
- **Volume** block:
- `Volume Avg (N)` = **daily** SMA(N) **excluding today**
- `Current Volume` = **today-so-far** (intraday cumulative)
- `Volume change %` vs avg + emoji
- `Volume speed` = today’s **pace** vs the average daily pace
- **On-Chart Visuals**
- **MAs**: 20 / 50 / 150 / 200 (toggle individually)
- **Stop-loss label** at `close − ATR × multiplier` (or Auto from last 3 bars)
- **Pivot price labels** at confirmed swing highs/lows
- **Signals (optional)**
- **Predictive Breakout Warnings** (yellow ⚡) — early hints near S/R
- **Confirmed Breakouts** — green “BUY”/red “SELL”; 🔥 marks very high volume
- **Smart SELL** set — small triangles for:
- RSI **overbought** fade
- **Bearish RSI divergence**
- **EMA-cross** with volume filter
- Thin **EMA** line when Smart SELL is enabled (reference for the cross)
---
## Installation
1. Open **TradingView** → **Pine Editor**.
2. Paste your TII script.
3. Click **Save** → **Add to chart**.
4. If the table doesn’t show, ensure `overlay = true` (already set) and you’re on a symbol with data.
---
## Quick Start (2 minutes)
1. Open **Inputs**.
2. **Volume session alignment**:
- If your chart shows **Extended Hours**, turn **Include Extended Hours** **ON**.
- If not, leave it **OFF** (uses the symbol’s regular session).
3. Pick the **MAs** you want and set **ATR thresholds** & **Stop-loss** style (**Auto** or anchored day).
4. (Optional) Enable **Breakout Detection** and/or **Smart SELLs**.
5. Use the table to read:
- Volatility (ATR row), Position (MA row), Risk (Stop row), Momentum (RSI/CCI),
- Volume vs average & pace,
- **Trend summary** at the bottom.
---
## Volume Logic (important)
- **Today’s volume (intraday)** = **sum of intraday bars since session start**.
Reset uses:
- `syminfo.session` when **Include Extended Hours = OFF** (regular trading hours), or
- **00:00–23:59** when **ON** (includes pre/post).
- **Average volume** = **daily SMA(N)** with **today excluded** (prevents intraday skew).
- **Volume speed** assumes **US RTH 09:30–16:00 (America/New_York)**.
Adjust in code if you trade other sessions.
> **Tip:** To match the built-in Volume pane, mirror your chart’s **Extended Hours** setting with the indicator’s **Include Extended Hours** toggle.
---
## Inputs Overview
### Table Visualization
- **Location** (Top/Middle/Bottom × Left/Center/Right)
- **Text color & size**
### General Information
- **Symbol & TF**, **Company Name**, **Industry & Sector**, **Market Cap**
- **Show Days Until Earnings**, **Show Earnings Info**
### Moving Average Position
- Toggle **MA 20 / 50 / 150 / 200** (on-chart lines + table status)
### ATR Indication
- Show **ATR (14)** & percent
- **Red/Yellow thresholds** → 🟢/🟡/🔴 ATR emoji
### Stop-Loss
- **Source**: Today / Yesterday / 2 Days Ago / **Auto** (tightest of last 3 ATR anchors)
- **ATR Multiplier**: widen/tighten stops
### Volume
- **Include Extended Hours**: defines day reset & matching with chart
- **Lookback (days)**: N for daily average (today excluded)
### Trend Calculation
- Weights for **MA**, **RSI**, **Volume** (default 0.6 / 0.3 / 0.1)
- Total ≥ **0.6** ⇒ **📈 Uptrend 🟢**; otherwise **Downtrend 🔴**
### Pivot High/Low Labels
- **pivotStrength**: larger = stronger swings; confirms later
### Breakout Detection (optional)
- **S/R Length** (window), **Volume Multiplier** vs vol SMA20
- Filters: **Use Volume**, **Use RSI**, **Use Trend**, **Use Retest**
- **Min Breakout %**, **Min Candle Body %**
### Smart SELL Signals (optional)
- **RSI Overbought** level
- **RSI Divergence** lookback
- **EMA Cross** length (with volume > avg filter)
---
## Reading Emojis at a Glance
- **ATR**: 🟢 calm • 🟡 medium • 🔴 high volatility
- **MA status**: “Above … 🟢 / Below … 🔴”
- **Stop-loss** row: 🟢 safer distance • 🟡 moderate • 🔴 tight/at risk
- **Volume**: 🔴 below avg • 🟡 ≈ avg • 🟢 above avg
- **Trend**: “📈 Uptrend 🟢” or “Downtrend 🔴”
Trend-Fib-Pivot Sweep [JopAlgo]Trend-Fib-Pivot Sweep — trend rails + Fib touch rules + sweep logic
Core idea
This tool blends two trend MAs, a rolling Fibonacci grid, and pivot sweep tags so you can do three things quickly:
Trend → MA1 vs MA2 stack and slope
Location → Fib touch/bounce/reject rules
Triggers → sweep → reclaim or trend pullback → continuation
Use the MAs for bias, the Fib levels for where price should react, and the sweeps to spot traps and entries after liquidity grabs.
What you’ll see
MA 1 (default 21, purple) and MA 2 (default 50, gray)
Fib lines from the highest/lowest of your lookback: 0.236 (light blue), 0.382 (green), 0.5 (white), 0.618 (orange), 0.786 (red)
Sweep markers: triangle above = high sweep; triangle below = low sweep
Background: soft green when MA1 > MA2, soft red when MA1 < MA2
Read it fast → Trend (background + MA stack)? Which Fib are we near? Any sweep and reclaim?
How the Fib levels work (and what to do at each)
0.236 → shallow pullback in a strong trend
→ Expect quick bounce continuation.
→ If price closes through 0.236 and stalls, momentum may be cooling; look to 0.382.
0.382 → standard trend pullback
→ In a bullish trend, tests here often bounce and continue.
→ Entry idea: touch/bounce at 0.382 with MA1 above MA2 and rising, then a higher-low and push back above 0.382 → enter.
0.5 → midline / fair value
→ Often the “decision” level.
→ Clean continuation if 0.5 holds; deeper rotation if we accept below (for longs).
0.618 (“golden”) → deep pullback / last line for trend
→ Best risk-defined continuation entries come from rejects/reclaims here.
→ For longs: wick below 0.618, then reclaim 0.618 → long with stop under the sweep low.
0.786 → exhaustive pullback / trap zone
→ If trend is truly alive, 0.786 rejects and snaps back.
→ If we accept beyond 0.786 (closes), expect a full range rotation or trend change.
Touch/bounce rule of thumb
You want to see price interact: touch → reject (wick) → reclaim the level.
A close back above the Fib after a downside probe (or below after an upside probe) is a stronger confirmation than intrabar wicks.
What the MAs do (and how to use them)
MA1 (fast) vs MA2 (slow) define bias and momentum.
MA1 above MA2 and both rising (↗) → bullish regime.
MA1 below MA2 and both falling (↘) → bearish regime.
Flat / crossing often → balance; lean on sweeps and the deeper Fibs (0.5/0.618/0.786).
Interaction with Fibs
Highest quality: Fib level + MA confluence (e.g., 0.382 near MA1).
When MA1 = dynamic trigger: reclaim MA1 at a Fib → continuation signal.
When MA2 = last defense: lose MA2 at 0.5/0.618 → expect deeper rotation.
Sweep logic (why it matters and how to execute)
High sweep = current bar’s high takes out the recent high then fails → liquidity grab above.
Low sweep = current bar’s low takes the recent low then fails → liquidity grab below.
Execution idea
Longs: low sweep into 0.5/0.618/0.786, then reclaim the Fib and, ideally, MA1 → enter; stop under sweep low.
Shorts: high sweep into 0.5/0.382/0.236, then reclaim below the Fib and MA1 → enter; stop above sweep high.
Repaint note
If you enable Lag-Confirmed Pivot Mode, sweep labels are stricter and may “finalize” later (can appear as repaint).
For signals/alerts, prefer non-repaint mode; for review/training, lag-confirmed is fine.
How to trade it (simple playbook)
Direction filter (use MAs first)
Bullish bias → MA1 > MA2 and not flat → look for longs at 0.236/0.382/0.5.
Bearish bias → MA1 < MA2 → look for shorts at 0.236/0.382/0.5 from above.
Entries (two clean templates)
Trend pullback → continuation
→ In bull regime: price pulls to 0.382 or 0.5, shows rejection wick, then reclaims level and MA1 → enter long.
→ In bear regime: mirror with short from above.
Sweep → reclaim
→ Downside sweep through 0.618/0.786, then close back above the Fib and through MA1 → enter long.
→ Upside sweep through 0.382/0.236, then close back below and under MA1 → enter short.
Risk & targets
Stops → beyond the sweep extreme or below/above the reclaimed Fib (structure-based).
Targets → next Fib ladder (e.g., long from 0.5 → target 0.382 → 0.236), or obvious POC/HVNs if you use Volume Profile.
Settings that matter (and how to tune)
MA Types/Lengths
EMA (default fast) = responsive trend read.
SMA/HMA = smoother backbone.
21/50 is a solid default; swing traders can run 34/89.
Fib Lookback
Shorter lookback = tighter range, more sensitive levels;
Longer = broader swing map, fewer interactions but stronger signals.
Sweeps
Sweep Detection Range controls how “recent” the pivot must be (default 10).
Lag-Confirmed mode reduces false sweeps but can finalize later.
Starter presets
Intraday (15m–1H) → MA1 21 EMA, MA2 50 SMA, Fib lookback 100–150, Sweeps 10
Swing (4H) → MA1 34 EMA, MA2 89 SMA, Fib lookback 150–250, Sweeps 10–14
Pattern cheat sheet
0.382 kiss & go (trend day) → quick tag and bounce in bull regime → continuation.
0.5 decision → hold = trend resumes; failure = rotate to 0.618.
0.618 sweep + reclaim → high-quality continuation with tight risk.
0.786 trap → deep flush then snapback; if acceptance persists, expect full rotation.
MA pinch → break → MA1 and MA2 compress, then price breaks and holds a Fib → expansion leg.
Best combos (kept simple)
Volume Profile v3.2 → use VAH/VAL/POC/LVNs as concrete targets; look for Fib + VP confluence.
Anchored VWAP → reclaims/rejections at anchored lines with Fib reaction and MA agreement improve timing.
Common mistakes this helps you avoid
Buying into 0.618/0.786 without a reclaim (catching falling knives).
Fading a 0.236 pullback when MAs are strongly ↗ (fighting trend).
Taking sweeps without a reclaim/confirmation.
Ignoring the MA stack when choosing direction.
Disclaimer
This indicator and write-up are for education only, not financial advice. Trading involves risk; results vary by market, venue, and settings. Test first, act at defined levels, and manage risk. No guarantees or warranties are provided.
Triple VWAP [JopAlgo]Triple VWAP — three volume-weighted rails for trend, pullback, and reversion
Core idea
This is three rolling VWAPs (VWMA-style) with user-set lengths. Together they show:
Trend structure → stack & slope of the three lines
Pullback zones → dynamic VWAP supports/resistances
Reversion risk → distance from the fastest VWAP
Use the stack (fast/medium/slow) for bias, slope for momentum, and distance to avoid chasing.
What you’ll see
VWAP 1 (fast), VWAP 2 (medium), VWAP 3 (slow)
Colors match inputs; each line can be toggled on/off
No bands or extras—just three clean volume-weighted rails
Read it fast → Which line is on top? Are they fanning out or braiding? How far is price from the fast VWAP?
How to use it (simple playbook)
Direction filter
Bullish bias → fast above medium above slow and slopes ↗
Bearish bias → fast below medium below slow and slopes ↘
Entry timing
Trend pullback (with level): In a bullish stack, wait for price to retest fast/medium VWAP at a real level → look for the first higher-low and continuation.
Reclaim / reject: Long when price reclaims fast → medium with holds (mirror for shorts on rejects).
Don’t chase: If price is far above the fast VWAP, wait for a revert toward fast before engaging.
Location first (always)
Act at real references → Volume Profile v3.2 (VAH/VAL/POC/LVNs) and Anchored VWAP
No level → no trade
Quality check (optional)
CVDv1 → prefer Alignment OK, avoid entries when Absorption reads against your side
Entries, exits, risk
Continuation long: Bullish stack ↗, pullback into fast/medium at VAL / AVWAP / LVN, hold → enter
Stop → below structure/last swing • Targets → POC/HVNs or prior swing
Break + retest: Price crosses medium and holds above it, lines begin to fan out ↗ → enter on the retest
Fade to value (advanced): Extended move into VAH with price stretched far from fast VWAP → look for reject and revert toward POC/fast
Trim/Avoid: Into HVNs with lines flattening or braiding → take profits / stand down
Settings that matter (and how to tune)
VWAP Length 1 / 2 / 3 → choose a fast / medium / slow ladder
Shorter = more reactive, more noise
Longer = steadier bias, more lag
Visibility toggles → hide one line if cluttered; many traders keep fast & slow only
Starter presets
Scalp (1–5m) → 20 / 50 / 100
Intraday (15m–1H) → 50 / 100 / 200
Swing (2H–4H) → 50 / 150 / 300
High-vol pairs → 30 / 60 / 120
Pattern cheat sheet
Stack flip: Fast crosses medium, then slow, and all slopes turn ↗ / ↘ → regime change
Triple pinch → expansion: Lines braid tight, then fan out with price holding a level → expansion leg
Kiss & go: Pullback tags fast VWAP in trend and bounces → add/enter with structure
Mean-revert tag: Stretch away from fast into VP edge → revert toward fast/POC
Best combos (kept simple)
Volume Profile v3.2 → entries at VAH/VAL/LVNs, targets at POC/HVNs
Anchored VWAP → session/weekly/event anchors for major reclaims/rejections; use Triple VWAP for day-to-day timing
CVDv1 (optional) → take VWAP-aligned setups with flow; skip when Absorption is against you
Common mistakes this helps you avoid
Trading against the VWAP stack
Chasing far from the fast VWAP
Acting mid-range while lines braid (do less; wait for expansion or edges)
Disclaimer
This indicator and write-up are for education only, not financial advice. Trading involves risk; results vary by market, venue, and settings. Test first, trade at defined levels, and manage risk. No guarantees or warranties are provided.
Multi-Timeframe MACD with Color Mix (Nikko)Multi-Timeframe MACD with Color Mix (Nikko) Indicator
This documentation explains the benefits of the "Multi-Timeframe MACD with Color Mix (Nikko)" indicator for traders and provides easy-to-follow steps on how to use it. Written as of 05:06 AM +07 on Saturday, October 04, 2025, this guide focuses on helping you, as a trader, get the most out of this tool with clear, practical advice before diving into the technical details.
Benefits for Traders
1. Multi-Timeframe Insight
This indicator lets you see momentum trends across 15-minute, 1-hour, 1-day, and 1-week timeframes all on one chart. This big-picture view helps you catch both quick market moves and long-term trends without flipping between charts, saving you time and giving you a fuller understanding of the market.
2. Visual Momentum Representation
The background changes from red to green based on short-term (15m) momentum, giving you a quick, easy-to-see signal—red means bearish (prices might drop), and green means bullish (prices might rise). The histogram uses a mix of red, green, and blue colors to show the combined strength of the 1-hour, 1-day, and 1-week timeframes, helping you spot strong trends at a glance (e.g., a bright mix for strong momentum, darker for weaker).
3. Enhanced Decision-Making
The background and histogram colors work together to confirm trends across different timeframes, making it less likely you’ll act on a false signal. This helps you feel more confident when deciding when to buy, sell, or hold.
4. Proactive Alert System
You can set alerts to notify you when the percentage of bullish timeframes hits your chosen levels (e.g., below 10% for bearish, above 90% for bullish). This keeps you in the loop on big momentum shifts without needing to watch the chart all day—perfect for when you’re busy.
5. Flexibility and Efficiency
You can turn timeframes on or off, adjust settings like speed of the moving averages, and tweak transparency to fit your trading style—whether you’re a fast scalper or a patient swing trader. Everything is shown on one chart, saving you effort, and the colors make it simple to read, even if you’re new to trading.
How to Use It
Getting Started
Add the Indicator: Load the "Multi-Timeframe MACD with Color Mix (Nikko)" onto your TradingView chart using the Pine Script editor or indicator library.
Pick Your Timeframes: Turn on the timeframes that match your trading—use 15m and 1h for quick trades, or 1d and 1w for longer holds—using the enable_15m, enable_1h, enable_1d, enable_1w, and enable_background options.
Reading the Colors
Background Gradient: Watch for red to signal bearish 15m momentum and green for bullish momentum. Adjust the Background_transparency (default 75%, or 25% opacity) if the chart feels too busy—try lowering it to 50 for clearer candlesticks in fast markets.
Histogram and EMA Colors:
The histogram and its Exponential Moving Average (EMA) line show a mix of red (1-week), green (1-day), and blue (1-hour) based on how strong the momentum is in each timeframe.
Brighter colors mean stronger momentum—white (all bright) shows all timeframes are pushing up hard, while darker shades (like gray or black) mean weaker or mixed momentum.
Turn off a timeframe (e.g., enable_1h = false) to see how it changes the color mix and focus on what matters to you.
Setting Alerts
Set Your Levels: Choose a threshold_low (default 10%) and threshold_high (default 90%) based on your comfort zone or past market patterns to catch big turns.
Get Notifications: Use TradingView alerts to get pings when the market hits your set levels, so you can act without staring at the screen.
Practical Tips
Pair with Other Tools: Use it with support/resistance lines or the RSI to double-check your moves and build a solid plan.
Tweak Settings: Adjust fast_length, slow_length, and signal_smoothing to match your asset’s speed, and bump up the lookback (default 50) for steadier trends in wild markets.
Practice First: Test different timeframe combos on a demo account to find what works best for you.
Understanding the Colors (Simple Explanation)
How Colors Work
The histogram and its EMA line use a color mix based on a simple idea from color theory, like mixing paints with red, green, and blue (RGB):
Red comes from the 1-week timeframe, green from 1-day, and blue from 1-hour.
When all three timeframes show strong upward momentum, they blend into bright white—the brightest color, like a super-bright light telling you the market’s roaring up.
If some timeframes are weak or pulling down, the mix gets darker (like gray or black), warning you the momentum might not be solid.
Brighter is Better
Bright Colors = Strong Opportunity: The brighter the histogram and EMA (closer to white), the more all your chosen timeframes are in agreement that prices are rising. This is your signal to think about buying or holding, as it points to a powerful trend you can ride.
Dark Colors = Caution: A darker mix (toward black) means some timeframes are lagging or bearish, suggesting you might wait or consider selling. It’s like a dim light saying, “Hold on, check again.”
Benefit in Practice: Watching the brightness helps you jump on the best trades fast. For example, a bright white histogram on a green background is like a green traffic light—go for it! A dark gray on red is like a red light—pause and rethink. This quick color check can save you from bad moves and boost your profits when the trend is strong.
Why It Helps
These colors are your fast friend in trading. A bright histogram means all your timeframes are cheering for an uptrend, giving you the confidence to act. A dull one tells you to be careful, helping you avoid traps. It’s like having a color-coded guide to pick the hottest market moments!
Technical Details
Input Parameters
Fast Length (default: 12): Short-term moving average speed.
Slow Length (default: 26): Long-term moving average speed.
Source (default: close): Price data used.
Signal Smoothing (default: 9): Smooths the signal line.
MA Type (default: EMA): Choose EMA or SMA.
Timeframe and Scaling
Timeframes: 15m, 1h, 1d, 1w, with on/off switches.
Lookback Period (default: 50): Sets the data window for trends.
Background Transparency (default: 75%): Controls background see-through level.
MACD Calculation
Per Timeframe: Uses request.security():
MACD Line: ta.ema(src, fast_length) - ta.ema(src, slow_length).
Signal Line: ta.ema(MACD, signal_length).
Histogram: (macd - signal) / 3.0.
Background Gradient
15m Normalization: norm_value = (hist_15m - hist_15m_min) / max(hist_15m_range, 1e-10), limited to 0-1.
RGB Mix: Red drops from 255 to 0, green rises from 0 to 255, blue stays 0.
Apply: color.new(color.rgb(r_val, g_val, b_val), Background_transparency).
Histogram and EMA Colors
Color Assignment:
1h: Blue (#0000FF) if hist_1h >= 0, else black.
1d: Green (#00FF00) if hist_1d >= 0, else black.
1w: Red (#FF0000) if hist_1w >= 0, else black.
Final Color: final_color = color.rgb(min(r, 255), min(g, 255), min(b, 255)).
Plotting: Histogram and EMA use final_color; MACD (#2962FF), signal (#FF6D00).
Alerts
Bullish Percentage: bullish_pct = (bullish_count / bullish_total) * 100, counting hist >= 0.
Triggers: Below threshold_low or above threshold_high.
--------------------------------------------------------------------
Conclusion
The "Multi-Timeframe MACD with Color Mix (Nikko)" is your all-in-one tool to spot trends, confirm moves, and trade smarter with its bright, easy-to-read colors. By using it wisely, you can sharpen your market edge and trade with more confidence.
This README is tailored for traders and reflects the indicator's practical value as of 05:06 AM +07 on October 04, 2025.
Multiple Moving Averages [JopAlgo]Multiple Moving Averages — read trend, timing, and strength at a glance
What it does:
Mark up to 5 moving averages (you pick type + length + color). Watch how they stack, slope, braid, and fan out to judge trend direction, pullback timing, and breakout quality on any timeframe.
Read it in 5 seconds
Stack order:
Bullish: fast MAs on top of slow MAs.
Bearish: fast MAs below slow MAs.
Slope: up = trend has a tailwind; down = headwind.
Spacing: wide = strong trend; tight/braided = balance/chop.
If you remember only one rule: trade with the stack and slope, enter at levels.
High-probability plays (simple and repeatable)
Trend pullback (with level)
Stack is bullish, slopes up.
Price pulls back to the MA cluster (or AVWAP/VAL), holds, fast MAs curl back up.
Long. Stop: below structure/slowest MA. Target: POC/HVNs or next swing.
(Mirror for shorts in a bearish stack.)
Reclaim + recurl
After a down phase, price closes above fast MAs (MA1–MA2), they turn up, and you’re at a real level (AVWAP/VA edge).
Take the first higher-low with the stack starting to flip.
Squeeze → expansion
MAs braid tight = energy building.
Break at a level, then the lines fan out in your direction.
Enter on the first retest that holds.
Skip trades when the lines are braided mid-range and you’re not at a level.
Timeframe guide (what usually works)
1–5m (scalps): EMA heavy (e.g., 5/9/21/34/55). Expect more signals; filter with levels + CVD.
15m–1H (intraday): 9/21/34/50/200 (mix EMA for fast, SMA for slow).
2H–4H (swing): 10/20/50/100/200 or 8/21/34/55/89 (smoother read).
1D+ (position): 20/50/100/200 (bias) and enter on lower TF.
Tip: Don’t set all five to the same length—stagger them so the stack tells a story.
Settings that matter (and what they mean)
MA types (pick the feel you like):
EMA – fastest response (great for timing).
SMA – smoother backbone (great for bias).
WMA / LWMA – responsive but less twitchy than EMA.
VWMA – weights price by volume (good on assets with uneven volume).
SMMA – very smooth (reduces whips).
DEMA – extra fast (can be noisy).
HEMA – in this script behaves like a double-EMA style response (fast).
RVIMA – not implemented here (will plot nothing if chosen).
Length:
Shorter = earlier turns, more noise.
Longer = slower, cleaner bias.
Keep a sensible spread (e.g., 1:2:3… or Fib-style 9/21/34/55/89).
Colors:
Use consistent colors (e.g., warm = fast, cool = slow) so you can read the stack instantly.
Best combos with other tools
Volume Profile v3.2: take signals at VAH/VAL/LVNs; use POC/HVNs for targets.
Anchored VWAP: reclaims/rejections + MA recurl = clean timing.
CVDv1: execute with flow (Alignment OK, strong Imbalance, no Absorption against you).
Common mistakes this prevents
Shorting into a bullish stack (or buying into a bearish one).
Chasing far from the fast MAs; better to wait for a pullback.
Trading every wiggle in chop—braids tell you to do less.
Quick FAQs
Cluttered chart? Hide 1–2 lines (keep fast, middle, slow) or thin the linewidth.
Which one is “right”? None. Pick a set that fits your tempo and stick to it.
RVIMA option? Not implemented in this version—choose another type.
Starter presets (copy these, then adjust)
Intraday: MA1 EMA9, MA2 EMA21, MA3 SMA34, MA4 SMA50, MA5 SMA200
Swing: MA1 EMA10, MA2 SMA20, MA3 SMA50, MA4 SMA100, MA5 SMA200
Scalp: MA1 EMA5, MA2 EMA9, MA3 EMA21, MA4 EMA34, MA5 EMA55
Mini-disclaimer
Educational tool, not financial advice. Always anchor trades to levels, flow, and risk—this indicator keeps your bias and timing honest; the plan is still yours.
Multi MA Cross [JopAlgo]Multi MA Cross — simple, flexible trend + timing
What it does:
Plots two moving averages (you pick the types and lengths) and marks their crossovers. Use it to read trend direction and time pullbacks/breakouts. Works on any timeframe.
What you’ll see
Short MA (orange)
Long MA (lime)
Cross mark (aqua ✚) when they cross
Green/lime above orange = bullish bias (short MA above long).
Orange above lime = bearish bias.
How to use it (simple playbook)
Trade with the bias
Longs only when short MA > long MA.
Shorts only when short MA < long MA.
Enter at a real level
Use Volume Profile v3.2 (VAH/VAL/POC/LVNs) or Anchored VWAP .
Crosses at or just after a level hold are higher quality.
Quality check (optional, strong)
CVDv1 : take trades when Alignment = OK, Imbalance strong, Absorption ≠ red.
Manage risk
Stop goes beyond the level/structure, not on an MA wiggle.
Trim into POC/HVNs or next structure.
Good entries you’ll recognize
Pullback-to-long MA (trend):
Bias up, price pulls to long MA (or AVWAP/VAL), short MA curls back up → enter long.
Reclaim + cross:
Price reclaims AVWAP/VA edge, then short MA crosses over long → confirmation to join.
Squeeze → break:
MAs converge (tight), then expand after a level break. Enter on retest that holds.
Skip crosses in the middle of nowhere. Cross + location + flow beats cross alone.
Timeframe guidance
1–5m (scalps): EMA/EMA or EMA/WMA. Expect more crosses. Use VP/AVWAP and CVD filters.
15m–1H (intraday): EMA(9) vs SMA(21) is a solid default.
2H–4H (swing): SMA(20–34) vs SMA(50) or EMA(21) vs EMA(55).
1D+ (position): SMA(50) vs SMA(200) for broad bias; entries on lower TF.
Settings that matter (and what they mean)
Short/Long MA Type:
EMA = fast, good for timing.
SMA = smooth, good for bias.
WMA/LWMA = in-between (responsive).
VWMA = weights by volume.
SMMA = very smooth (reduces whips).
HEMA/DEMA = extra responsive.
VWAP = daily session VWAP (anchor), ignores length in practice.
Short/Long Length:
Short = timing sensitivity.
Long = trend backbone.
Keep a ratio ~ 1:2 to 1:3 (e.g., 9/21, 10/30, 20/50).
Note on VWAP option: The script fetches a daily VWAP anchor. It acts like a fair-value line, not a rolling MA. Your Length won’t affect VWAP.
Filters that boost win rate
Slope check: Only take longs when both MAs slope up; shorts when both slope down.
Distance check: Don’t chase if price is far from the short MA; wait for a pullback.
HTF agreement: On 15m, glance at 1H/4H bias; on 4H, glance at 1D. Trade with the higher-TF wind.
Combos that work
Volume Profile v3.2: Use VAH/VAL/POC/LVNs for entries/targets. Cross at those references is meaningful.
Anchored VWAP: Reclaims/rejections first, MA cross second = cleaner timing.
CVDv1: Only act when flow agrees (ALIGN OK, no Absorption against you).
Common mistakes this avoids
Shorting into an up-bias (or vice versa).
Chasing a cross far from value (wait for the pullback).
Trading every cross in chop (use levels + CVD to filter).
Defaults to start with
Short MA: EMA 9
Long MA: SMA 21
Timeframes: 15m–4H
Process: Bias → Level → Cross/Retest → CVD check → Execute
Quick disclaimer
Educational tool, not financial advice. Test first, size sensibly, and always anchor your trades to levels, flow, and risk.
Kairi Relative Index Upgrated v1Kairi Relative Index Upgraded v1 — how far from “fair” are we, right now?
Most oscillators mash together price and momentum in ways that are hard to explain to a new trader. KRI is refreshingly simple: it measures how far price is from its moving average, as a percent of that average.
KRI = 100 × (Price − SMA) / SMA
Above 0 → price is above its average (stretched up).
Below 0 → price is below its average (stretched down).
The farther from 0, the more stretched we are from the mean.
This upgraded version keeps the pane clean (zero line, colored KRI, optional guide rails at +Line Above / Line Below) so you can read extension, reversion pressure, and reclaims at a glance—on any timeframe.
(If you add screenshots: image #1 should label the zero line and ± threshold lines; image #2 should show a textbook “overshoot at VAH/VAL + KRI extreme → rotate back to POC.”)
What you’re seeing (and how to read it fast)
KRI line
Green when KRI ≥ 0 (price above SMA)
Red when KRI < 0 (price below SMA)
Zero line = the moving average itself (no stretch).
Guide lines (default +10/−10) = “This is pretty far for this setting.” Treat these as review-and-decide zones, not auto-trade signals.
Three quick reads:
Magnitude: how far from the mean (size of KRI).
Direction: above/below zero (which side of the mean).
Turn: KRI curling back toward zero (reversion starting) or accelerating away (trend impulse continuing).
What KRI really measures (plain-English)
The SMA(length) is your “fair value” line for this indicator.
KRI tells you the percentage deviation from that fair value—normalized, so you can compare across assets/timeframes with the same length.
Because it’s a pure distance metric, KRI excels at:
spotting over-extensions into VP edges (VAH/VAL) and AVWAP,
timing mean-reversion back to POC/AVWAP in balance,
confirming reclaims (KRI crossing back through zero at a level),
framing pullbacks in trend (healthy dips usually avoid deep negative KRI in strong uptrends).
Using KRI on any timeframe
The workflow is always Location → Flow → KRI:
Location: a real level (Volume Profile v3.2’s VAH/VAL/POC/LVNs or Anchored VWAP).
Flow quality: check CVDv1 (Alignment OK? Absorption not red?).
KRI: are we stretched into/away from the level, and is KRI turning?
Scalping (1–5m)
Fade the stretch (balance): At VAH/VAL or Session AVWAP, an extreme KRI that rolls back toward zero = quick rotation to the middle (POC/AVWAP).
Don’t fade if bands are expanding and flow is strong (CVDv1 says go) — big KRI can stay big in expansion.
Intraday (15m–1H)
Continuation after pullback: In uptrends, look for shallow negative KRI at support (VAL/AVWAP) that turns up → join trend.
Failed breakout tell: Price pokes above VAH but KRI barely increases or rolls over quickly → likely a reclaim back inside value.
Swing (2H–4H)
Edge-to-mean rotations: At composite VAH/VAL, KRI extremes are great context: fade back to POC/HVNs if flow doesn’t confirm a breakout.
Reclaim confirmation: After a flush below Weekly AVWAP, KRI crossing back up through zero on the reclaim bar is a clean green light.
Position (1D–1W)
Regime posture: Multi-day runs with sustained positive KRI (and shallow dips) = constructive; mirror for downtrends. Use KRI pullbacks to ~0 at Weekly AVWAP for adds.
Entries, exits, and risk (simple rules)
Mean-reversion entry: At VAH/VAL or AVWAP, wait for KRI extreme at/through your guide line and a turn back toward zero.
Stop: just beyond the level; Target: POC/HVN or the zero line on KRI.
Trend-continuation entry: In a trend, take pullbacks where KRI stays modest (doesn’t blow through your lower/upper guide) and turns back with the trend at the level.
Avoid: chasing breakouts where KRI is already extreme and still climbing unless CVDv1 says Alignment OK + no Absorption and you have a clean retest.
Settings that matter (and how to tune them)
Length (default 50): defines the moving average “fair value.”
Shorter (20–34): faster, more signals, more noise—good for intraday.
Longer (50–100): steadier, better for swings/position.
Source (default close): keep it simple; hlc3 or close both work.
Line Above / Below (defaults +10/−10): your review zones. Tune them to the asset/timeframe:
Scroll back 6–12 months and eyeball typical |KRI| spikes. Set your lines around the 80th–90th percentile of |KRI| for that market and length.
Majors often need smaller thresholds than thin alts on the same timeframe.
Tip: If your KRI is always beyond the lines, increase length or widen the thresholds. If it never touches them, shorten length or tighten thresholds.
What to look for (pattern cheat sheet)
Stretch into level → curl: KRI tags an extreme right at VAH/VAL/AVWAP, then turns back → classic rotation.
Shallow pullback in trend: KRI dips toward zero but doesn’t hit your lower guide, then turns up at support → continuation.
No-juice break: New price high with weaker KRI (smaller positive % vs prior leg) → breakout lacks extension; plan for retest or reclaim.
Zero-line reclaims: After a washout, KRI crosses zero as price reclaims AVWAP/VAL → clean confirmation.
Combining KRI with other tools
Cumulative Volume Delta v1 (CVDv1):
Use KRI for stretch/turn, CVDv1 for quality.
A KRI extreme at VAH with CVDv1 Absorption (red) is a do-not-chase; look for the fail/reclaim.
A KRI pullback toward zero at VAL with Alignment OK + strong Imbalance + no Absorption = high-quality continuation.
Volume Profile v3.2:
KRI’s best signals happen at VAH/VAL/POC/LVNs.
LVN traversals with rising KRI often run quickly to the next HVN—use VP for targets.
Anchored VWAP :
Treat AVWAP as fair-value rails. KRI zero cross on an AVWAP reclaim is your green flag; KRI extreme + failure to accept beyond AVWAP warns of a fake break.
Common pitfalls KRI helps you avoid
Buying high into a tired move: KRI already very positive at VAH and rolling over = likely rotation; wait.
Fading true expansion: In strong trends with confirmed flow, KRI can remain extreme; don’t automatically fade just because it’s “far.”
Wrong thresholds: Copy-pasting ±10 to every market/timeframe can mislead. Calibrate to the market you trade.
Practical defaults to start with
Length: 50
Lines: +10 / −10 as placeholders—calibrate later.
Timeframes: great out of the box on 15m–4H; for 1–5m try Length 34 and tighter lines; for daily swings try Length 100 and broader lines.
Process: Level → CVDv1 quality → KRI stretch/turn. If any of the three disagree, wait for the retest.
Disclaimer & Licensing
This indicator and its description are provided for educational purposes only and do not constitute financial or investment advice. Trading involves risk, including the possible loss of capital. makes no warranties and assumes no responsibility for any decisions or outcomes resulting from the use of this script. Past performance is not indicative of future results. Use at your own risk.
Licensing & Attribution:
Copyright (c) 2018–present, Alex Orekhov (everget). Modified and upgraded by .
The original “Kairi Relative Index” is released under the MIT License, and this derivative is distributed under the MIT License as well. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files to deal in the Software without restriction, subject to the conditions of the MIT License, including the above copyright notice and this permission notice. The Software is provided “AS IS,” without warranty of any kind, express or implied.
Cycle Momentum Filter [JopAlgo]Cycle Momentum Filter (CMF) — spot “when” to engage the market, on any timeframe
Markets breathe in cycles (expansion → contraction) while momentum and trend decide which moves actually travel. CMF is a compact filter that blends those ideas so you can answer two questions before you click:
Is this a good moment to take a trade? (cycle position)
If I take it, is there enough force behind the move to carry it? (momentum + trend)
CMF does not replace your levels—use it with your location tools (e.g., Volume Profile v3.2 and Anchored VWAP). It simply keeps you out of entries taken at the wrong part of the swing or against weak momentum.
(When you add screenshots: image #1 should label each sub-line and the green/yellow/red background; image #2 can show CMF turning green at VAL + AVWAP before a rotation back to POC.)
What you’re seeing (and how to read it at a glance)
CMF draws five sub-lines around a zero line, plus a background color:
Cycle Oscillator (blue): where you are in the swing. Above zero ≈ cycle crest side; below zero ≈ trough side.
ROC % (purple): short-term price acceleration. Above zero = positive momentum; below zero = negative.
MACD Histogram (orange): classic impulse measure (fast–slow EMA gap). Above zero = bullish impulse.
EWO (cyan): Elliott Wave Oscillator (EMA fast – EMA slow). Above zero = trend tilt up.
RSI-MA (gray, plotted as RSI−50): smoothed RSI relative to 50. Above zero = buyers have the relative strength.
Background color = the filter result:
Green → bullish window: cycle favors longs and momentum/trend/RS confirm.
Red → bearish window: mirror logic.
Yellow → neutral: at least one piece disagrees—do less, or wait for alignment.
For new traders: Every sub-line crossing above/below zero is a yes/no vote. Green happens only when all bullish checks are true; red when all bearish checks are true.
How CMF is built (plain-English version)
Cycle (DPO-style): CMF subtracts a displaced SMA from price to remove trend and expose the swing. Below 0 = you’re on the dip side of the cycle; above 0 = rally side.
Momentum (ROC): percent change over roc_length bars; tells you if price is actually accelerating.
Impulse (MACD hist): measures push from fast vs slow EMAs.
Trend tilt (EWO): broader drift via two EMAs (fast/slow).
Participation bias (RSI-MA): smoothed RSI relative to 50 (plotted as RSI−50 so its zero line matches the others).
The signal rules are strict AND conditions:
Bullish = cycle < 0 and ROC > 0 and MACD hist > 0 and EWO > 0 and RSI-MA > 0.
Bearish = cycle > 0 and ROC < 0 and MACD hist < 0 and EWO < 0 and RSI-MA < 0.
Otherwise Neutral.
This strictness is deliberate: it cuts a lot of low-quality entries.
Using CMF on any timeframe
The framework is the same—only your anchors/targets change as you zoom.
Scalping (1–5m)
Where: VP v3.2 VAL/VAH/LVNs or Session AVWAP.
When: take longs when CMF turns green on/after a dip to your level; shorts when it turns red on/after a pop into resistance.
Skip: yellow reads in the middle of the range; that’s chop.
Tip: on very fast pairs, require two consecutive green/red bars before entry.
Intraday (15m–1H)
Use CMF green to time pullbacks to AVWAP or VA edges in the trend direction.
In balance days, wait for CMF color + level alignment to fade back to POC.
If CMF flips yellow after entry, tighten risk; if it flips against you, consider exiting early.
Swing (2H–4H)
Treat first green after a higher-timeframe pullback to Weekly AVWAP or composite VAL as your A-setup.
If CMF stays green through the first pullback, consider adding; the opposite for red in downtrends.
Position (1D–1W)
Fewer, bigger decisions: CMF green at Monthly/Quarterly AVWAP or at composite VAL suggests rotation toward POC/HVNs; CMF red at VAH suggests mean-reversion lower.
If CMF can’t turn green/red at key retests, that’s valuable: the level likely won’t hold.
Entries, exits, and risk (simple rules)
Entry: trade at a level when CMF just flips to your side (green for longs / red for shorts).
Invalidation: if CMF reverts to yellow immediately, it’s a warning; if it flips to the opposite color, that’s your soft stop condition—tighten or exit unless higher-timeframe context argues otherwise.
Targets: use Volume Profile v3.2 (POC/HVNs) and AVWAP (mean) for logical destinations.
Don’t use CMF alone for stops; place them beyond the level or structure.
Settings that actually matter (and how to tune them)
Cycle Length (default 20): swing detection.
Shorter (10–14): quicker flips, better for scalps.
Longer (30–40): steadier cycle for swings/position.
ROC Length (default 10): momentum lookback.
Shorter: earlier yes/no, more noise.
Longer: slower, more selective.
MACD Fast/Slow (5/13) & EWO Fast/Slow (5/35): impulse and drift.
Increase slow values to calm false flips; decrease fast to react sooner.
RSI Length (14) & Smoothing (5): participation tilt.
Reduce smoothing for faster confirmation; increase to avoid whips.
Background on/off: keep it on while learning; once you’re comfortable, you can hide the background and read the lines against zero.
Tuning tip: If you trade only a few coins, optimize Cycle and ROC first; leave MACD/EWO defaults. Then decide how strict you want RSI (try RSI smoothing = 3 for faster reads).
What to look for (pattern cheatsheet)
Green at a dip-level (VAL/AVWAP) → rotate toward POC/HVN.
Red at a pop-level (VAH/AVWAP) → rotate down toward POC/HVN.
Color holds through the retest → continuation is more likely.
Color flips against the breakout → watch for failed break and reclaim.
Only one line disagrees (e.g., ROC < 0 while others > 0) → expect slower follow-through; consider waiting one bar.
Combining CMF with other tools
Volume Profile v3.2 :
Use VAH/VAL/POC/LVNs for where. CMF answers when.
Green at VAL → mean-reversion long to POC.
Red at VAH → fade to POC.
LVN breaks with green often travel quickly to the next HVN.
Anchored VWAP :
Reclaim of AVWAP + CMF turns green → higher-quality long; rejection + red → cleaner short.
Weekly AVWAP + CMF color is a reliable swing compass.
Cumulative Volume Delta v1 (CVDv1):
CMF says “now”, CVDv1 says “how good”.
Prefer CMF green when CVDv1 Alignment = OK, Imbalance strong, Absorption ≠ red.
If CMF flips green but CVDv1 shows Absorption (red), do not chase; look for a reclaim instead.
Common pitfalls CMF helps you avoid
Buying high in the cycle: CMF keeps longs to when the cycle is on the dip side and momentum/trend agree.
Forcing trades on yellow: yellow is your do-less mode—wait for alignment.
Ignoring flow at levels: CMF gives the window, but quality still matters; confirm with CVDv1.
Practical defaults to start with
Cycle 20 | ROC 10 | MACD 5/13 | EWO 5/35 | RSI 14 (smooth 5)
Works out of the box on 15m–4H.
For scalps, try Cycle 14 / ROC 7–9 / RSI smooth 3.
For daily swings, Cycle 30–34 / ROC 12–14.
Alerts (what they tell you)
Bullish Signal: CMF turned green (all bullish checks passed). Use it as a heads-up; still anchor the entry to VP/AVWAP.
Bearish Signal: CMF turned red. Same rule: wait for the level.
Open source & disclaimer
This indicator is published open source so traders can learn, tweak, and build rules they trust. Tools guide decisions; risk management decides outcomes.
Disclaimer — Not Financial Advice.
The “Cycle Momentum Filter ” indicator and this description are provided for educational purposes only and do not constitute financial or investment advice. Trading involves risk, including possible loss of capital. makes no warranties and assumes no responsibility for any trading decisions or outcomes resulting from the use of this script. Past performance is not indicative of future results.
