立即開始

在腳本中搜尋"文华财经tick价格"

Portfolio SummaryThe stocks in my portfolio has very poor performance since the FED hiked the rate. since the covid-19, i came to the stock market and buy a stock that i ever heard the name which i don't even know its fundamental. Some stock, i bought them at the hilltop (and sell at the bottom, hehe). Everyone is a genius in a bull market ; and now i realized i am gonna loss money. I have to do something, so i looked for an indicator that allow me to manage my portfolio. unfortunately, i cannot find one that fit me. so i make this indicator. How you can get the benefit from this indicator This indicator will summarize the gain/loss since you bought the stock. it also include the dividend. So that you can see how much you gain and loss, and make a decision as you wish. How to use it 1. Input some neccessary data like ticker/stock (up to 20 tickers, yeah i know, it is too much), share, average price which you can input manually or depend on your entry date. 2. The indicator will calculate gain/loss, dividend, % of your portfolio. 3. You can select how to display based on "Index" or "Market Value". 4. You can toggle on/off both label and table. Disclaimer This indicator may display inaccurate and need a lot of improvement. pls use carefully. if you have any suggestion, pls dont hersitate to comment below. Enjoy.
Pine Script®指標
由morzor61提供
8
Percentage Levels by TimeframePlots the positive and negative percentage levels from a selection of timeframes and sources for any ticker. You can use this within a pullback trading system. For example, if you historically look at the average pullback of large cap stocks and ETF's, you can use this indicator to plot the levels it could pullback to for an entry to go long. It can be used as potential targets when trading a ticker short. Another use for this is to backtest the set percentage targets using TradingView's bar replay feature to see how ETF's and large cap stocks have reacted at these levels. Note: This is intended to be used at timeframes equal to higher than the chart's as it may cause re-painting issues. Currently percentage levels are statically set to 1, 3, 5, 10, 15, 20, 25, and 30% levels above and below the chosen source (open, high, low, close). You can also display the data based on timeframes from Daily (1D) all the way up to Yearly (12M) *Not financial advice but in my opinion the current percentage levels set (see above) are best used for ETF's and Large Cap Stocks. Jan 2 Release Notes: Added the ability to select the historical bars to look back when plotting levels Jan 2 Release Notes: To get a better display or proper resolution on your charts, change the view settings to "Scale Price Chart Only" Jan 2 Release Notes: To add % labels for this indicator on the price axis, change your chart settings to include "Indicator Name Label" & "Indicator Last Value". You can find this under the Label section after hitting the gear icon in the bottom right of your chart. Jan 2 Release Notes: Added: Custom Line Plot Extension Settings. Ideally both values should be equal to display optimal extended lines. To return to a base setting: '1' = Historical Lookback & '0' = Offset Lines. Also note this is dependent on the timeframe you are viewing on the chart. Jan 2 Release Notes: Removed indicator from example chart that was not needed. Jan 2 Release Notes: Updated some comments in the Pine Script Jan 2 Release Notes: Update: Added commentary and instructions in the indicator settings to address recommended line plot settings for Stocks/ETF's vs Futures Jan 2 Release Notes: Changed title from "Calculation Method" to "Calculation Source" Jan 4 2021 Normal use of security() dictates that it only be used at timeframes equal to or higher than the chart's as it may cause re-painting
Pine Script®指標
由thacoolbreeze提供
4
MAROC Fast/SlowNot sure if a similar indicator already exist, so I created my own. After creating this indicator, I realize it looks very similar to MACD. However, it strictly uses Hull moving average in its calculation for the lines. MAROC is simply Moving Average Rate of Change. This is a trend-following indicator that calculates the rate of change on two Hull moving averages. By default it calculates the ROC on 60-period HMA (green and red) and 180-period HMA (blue and orange). The zero line represents the confirmation of change in trend. Above zero is up trend and below zero is down trend. Note the difference between the "trend reversal" and the "confirmation of a trend". I like to define trend reversal by the change in direction The colored squares on the zero line has 4 colors that represents the overall trend. Here I include the slowdown of MAROC as the start of a trend. - bright green = when both the slow and fast MA are trending up - faded green = when slow MA trending up, but fast MA trending down - faded red = when slow MA trending down, but fast MA trending up - bright red = when both the slow MA and fast MA are trending down Trend changes triangles are shown to signal the change in trend direction (trend reversal). Green and blue triangles are trend reversal to the upside. Red and orange triangles are trend reversal to the downside. This indicator includes the option of displaying buy(long) and sell(short) signals that follows these rules. Use at your own discretion, as it may not apply well with your market or ticker. - Long = Bright green square and either fast or slow MAROC changes trend direction to the upside - Short = Bright red square and either fast or slow MAROC changes trend direction to the downside Enjoy~! Please let me know if you find this useful and which market / ticker and timeframe you are using it on~ :)
Pine Script®指標
由PtGambler提供
12
All-Time High with Percentage Drops for ETF's and Large CapsPlots the percentage drop levels from the All-Time High of any ticker. You can use this within a pullback trading system. For example, if you historically look at the average pullback of large cap stocks and ETF's, you can use this indicator to plot the levels it could pullback to for an entry to go long. It can be used as potential targets when trading a ticker short. Another use for this is to backtest the set percentage targets using TradingView's bar replay feature to see how ETF's and large cap stocks have reacted at these levels. Currently percentage levels are statically set to 1, 2, 3, 5, 7, 10, & 20% levels below the All-Time High. *Not financial advice but in my opinion the current percentage levels set (see above) are best used for ETF's and Large Cap Stocks.
Pine Script®指標
由thacoolbreeze提供
2
MY:Aggregated Volume BTC:DERIVATIVES█ MY Aggregated Volume BTC DERIVATIVES This indicator shows a panel to display the Bitcoin Trading Volume of different exchanges. A lot of traders follow the default volume indicator provided by tradingview. This default indicator shows the volume for the current ticker (example BTCUSD:BITSTAMP), but each exchange has its own volume. In a matter of visibility and accessibility, I've decided to aggregate the volume of almost all the Bitcoin exchanges (tickers) in tradingview. This indicator helps identifying decreasing volume, where the volume comes from (spot or derivatives). A decreasing DERIVATIVES volume isn't a good sign as it shows a decrease in the buying pressure. The panel has 1 main configuration : Display mode, showing Aggregated (all exchanges in one bar) or Difference (Stacked bar) The other configuration Legend Item Gap and Legend X Gap is for when the difference mode is selected. It affects the position of the legend. Some might have smaller screens, bigger screens, viewport zoomed in etc. Due to the number of exchanges, and pinescript limitations, I had to split the volume in 2 indicators, the SPOT volume, and the DERIVATIVES volume. The script in this page is specific to the DERIVATIVES volume. For the SPOT, please refer to my other available script. Exchange list : // OKEX:BTCUSDPERP // OKEX:BTCUSDTPERP // FTX:BTCPERP // BTSE:BTCPFC // KRAKEN:XBTUSDPERP // BITMEX:XBTUSD // HUOBI:BTCPERP // DERIBIT:BTCPERP // BINANCE:BTCPERP // BINANCE:BTCUSDTPERP // PHEMEX:BTCUSD // BITGET:BTCUSDPERP // BITGET:BTCUSDTPERP
Pine Script®指標
由Thlem提供
1
MY:Aggregated Volume BTC:SPOT█ MY Aggregated Volume BTC SPOT This indicator shows a panel to display the Bitcoin Trading Volume of different exchanges. A lot of traders follow the default volume indicator provided by tradingview. This default indicator shows the volume for the current ticker (example BTCUSD:BITSTAMP), but each exchange has its own volume. In a matter of visibility and accessibility, I've decided to aggregate the volume of almost all the Bitcoin exchanges (tickers) in tradingview. Some have been commented out (Kucoin, FTX) due to high volume data which was hiding the other ones. This indicator helps identifying decreasing volume, where the volume comes from (spot or derivatives). A decreasing SPOT volume isn't a good sign as it shows a decrease in the buying pressure. The panel has 1 main configuration : Display mode, showing Aggregated (all exchanges in one bar) or Difference (Stacked bar) The other configuration Legend Item Gap and Legend X Gap is for when the difference mode is selected. It affects the position of the legend. Some might have smaller screens, bigger screens, viewport zoomed in etc. Due to the number of exchanges, and pinescript limitations, I had to split the volume in 2 indicators, the SPOT volume, and the DERIVATIVES volume. The script in this page is specific to the SPOT volume. For the DERIVATIVES, please refer to my other available script. Exchange list : // BINANCE:BTCUSD // BINANCE:BTCUSDT // BINANCE:BTCEUR // COINBASE:BTCUSD // COINBASE:BTCUSDT // COINBASE:BTCEUR // KRAKEN:XBTUSD // KRAKEN:XBTUSDT // KRAKEN:XBTEUR // BITFINEX:BTCUSD // BITFINEX:BTCEUR // HUOBI:BTCUSDT // HUOBI:BTCUSDC // OKEX:BTCUSDT // FTX:BTCUSD DISABLED FOR NOW, TO MUCH VOLUME // FTX:BTCUSDT DISABLED FOR NOW, TO MUCH VOLUME // KUCOIN:BTCUSDT DISABLED FOR NOW, TO MUCH VOLUME // KUCOIN:BTCUSDC DISABLED FOR NOW, TO MUCH VOLUME // GEMINI:BTCUSD // GEMINI:BTCEUR // PHEMEX:BTCUSDT // BITTREX:BTCUSD // BITTREX:BTCUSDT // BITTREX:BTCEUR
Pine Script®指標
由Thlem提供
12
Rainbow Strategy BacktestingRainbow Strategy Backtesting base on "Rainbow Moving Average" Strategy as below: 1.Rainbow Moving Average setup - Source: source of 1st MA - Type: SMA/EMA - Period: period of 1st MA - Displacement: period of 2nd MA to 7th MA with source is previous MA 2.Trend Define - Up Trend: Main MA moving at the top of Rainbow - Down Trend: Main MA moving at the bottom of Rainbow - Sideway: Main MA moving between the top and the bottom of Rainbow 3.Signal - Buy Signal: When Rainbow change to Up Trend. - Sell Signal: When Rainbow change to Down Trend. - Exit: When Rainbow change to Sideway. 4.RSI Filter - "Enable": Only signals have 1st RSI moving between Overbought and Oversold and 2nd RSI moving outside Middle Channel are accepted. - The filter may help trader avoid bull trap, bear trap and choppy market. 5.Backtesting Infomation - Ticker: BTCUSDT - Timeframe: H1 - Rainbow parameter: + Source: hlc3 + Type: SMA + Period: 12 + Displacement: 3 - RSI Filter parameter: + Enable + 1st RSI filter: period 12, overbought 65, oversold 35 + 2nd RSI filter: period 9, upper middle 56, lower middle 44
Pine Script®策略
由inno14提供
8
VT R Cloudsettings for the VT R Indicator VT R TIme (Minues) = 10 Session Time = 09:25 - 09:35 Show VT R Ticked Show VWMA Ticked VWMA Period = 10 Long Trade Rules 1. Close ABove buy above 2. trade above ma 3. volume > ma (volume Settings Given Below) 4. sl below sell below Short Trade Rules 1. close below sell below 2. trade below ma 3. volume > ma (volume Settings Given Below) 4. sl above buy above Volume Indicator has to be added manually i suggest to use the default Volume Indicator Settings for the Volume Indicator Lookback = 10 ShowMA Ticked LengthMA = 10
Pine Script®指標
由ravishanthi提供
1
Random Synthetic Asset GenerationThis script generates pseudo-random asset data . Due to the nature of the random generator, it is impossible to use this indicator as input for other indicators because the instance of the script that the indicator is applied to will automatically be different from the instance that is plotted on the chart. Therefore, the idea is to use this script in other scripts (to make it possible to backtest on random data, for example). The script has four main input parameters. Random Number Generator Method: It supports two methods for generating the pseudo-random numbers (one by Ricardo Santos and one by Wichmann-Hill). Seed: You can specify the seed to use. Each unique seed will generate a unique set of pseudo-random data. Intrabar Volatility: This basically sets how volatile the generated wicks will be (0 = no wicks). Price Multiplier: This is just a multiplier for the generated price data, so that you can scale up or down the generated price data. You can also change the colors of the bars. In addition to this, the indicator also generates random volume. In order to make it possible to show both volume and price, you need to have two identical instances of the indicator. One on the chart, and one in its own panel. Then, go into the Style tab in the indicator settings on the instance in the panel. Untick Up-Candles and Down-Candles boxes, and tick the Volume box. In a similar manner, you can also plot the true range data and the candle change data as well, by ticking one of those boxes instead.
Pine Script®指標
由lejmer提供
13
String Manipulation Framework [PineCoders FAQ]█  OVERVIEW This script provides string manipulation functions to help Pine coders.                                                                 █  FUNCTIONS PROVIDED f_strLeft(_str, _n) Function returning the leftmost `_n` characters in `_str`. f_strRight(_str, _n) Function returning the rightmost `_n` characters in `_str`. f_strMid(_str, _from, _to) Function returning the substring of `_str` from character position `_from` to `_to` inclusively. f_strLeftOf(_str, _of) Function returning the sub-string of `_str` to the left of the `_of` separating character. f_strRightOf(_str, _of) Function returning the sub-string of `_str` to the right of the `_of` separating character. f_strCharPos(_str, _chr) Function returning the position of the first occurrence of `_chr` in `_str`, where the first character position is 0. Returns -1 if the character is not found. f_strReplace(_src, _pos, _str) Function that replaces a character at position `_pos` in the `_src` string with the `_str` character or string. f_tickFormat() Function returning a format string usable with `tostring()` to round a value to the symbol's tick precision. f_tostringPad(_val, _fmt) Function returning a string representation of a numeric `_val` using a special `_fmt` string allowing all strings to be of the same width, to help align columns of values. `f_tostringPad()` Using the functions should be straightforward, but `f_tostringPad()` requires more explanations. Its purpose is to help coders produce columns of fixed-width string representations of numbers which can be used to produce columns of numbers that vertically align neatly in labels, something that comes in handy when, for example, you need to center columns, yet still produce numbers of various lengths that nonetheless align. While the formatting string used with this function resembles the one used in tostring() , it has a few additional characteristics:  • The question mark (" ? ") is used to indicate that padding is needed.  • If negative numbers must be handled by the function, the first character of the formatting string must be a minus sign ("-"),   otherwise the unary minus sign of negative numbers will be stripped out.  • You will produce more predictable results by using "0" rather than "#" in the formatting string. You can experiment with `f_tostringPad()` formatting strings by changing the one used in the script's inputs and see the results on the chart. These are some valid examples of formatting strings that can be used with `f_tostringPad()`: "???0": forces strings to be four units wide, in all-positive "int" format. "-???0": forces strings to be four units wide, plus room for a unary minus sign in the first position, in "int" format. "???0.0": forces strings to be four units wide to the left of the point, all-positive, with a decimal point and then a mantissa rounded to a single digit. "-???0.0?": same as above, but adds a unary minus sign for negative values, and adds a space after the single-digit mantissa. "?????????0.0": forces the left part of the float to occupy the space of 10 digits, with a decimal point and then a mantissa rounded to a single digit. █  CHART The information displayed by this indicator uses the values in the script's Inputs, so you can use them to play around. The chart shows the following information:  • Column 0 : The numeric input values in a centered column, converted to strings using tostring() without a formatting argument.  • Column 1 : Shows the values formatted using `f_tostringPad()` with the formatting string from the inputs.  • Column 2 : Shows the values formatted using `f_tostringPad()` but with only the part of the formatting string left of the decimal point, if it contains one.  • Column 3 : Shows the values formatted using `f_tostringPad()` but with the part of the formatting string left of the decimal point,   to which is added the right part of the `f_tostringPad()` formatting string, to obtain the precision in ticks of the symbol the chart is on.  • Column 4 : Shows the result of using the other string manipulation functions in the script on the source string supplied in the inputs.   It also demonstrates how to split up a label in two distinct parts so that you can vertically align columns when the leftmost part contains strings with varying lengths.   You will see in our code how we construct this column in two steps. █  LIMITATIONS The Pine runtime is optimized for number crunching. Too many string manipulations will take a toll on the performance of your scripts, as can readily be seen with the running time of this script. To minimize the impact of using string manipulation functions in your scripts, consider limiting their calculation to the first or last bar of the dataset when possible. This can be achieved by using the var keyword when declaring variables containing the result of your string manipulations, or by enclosing blocks of code in if blocks using barstate.isfirst or barstate.islast . █  NOTES To understand the challenges we face when trying to align strings vertically, it is useful to know that:  • As is the case in many other places in the TadingView UI and other docs, the Pine runtime uses the MS Trebuchet font to display label text.  • Trebuchet uses proportionally-spaced letters (a "W" takes more horizontal space than an "I"), but fixed-space digits (a "1" takes the same horizontal space as a "3").   Digits all use a figure space width, and it is this property that allows us to align numbers vertically.   The fact that letters are proportionally spaced is the reason why we can't vertically align columns using a "legend" + ":" `+ value structure when the "legend" part varies in width.  • The unary minus sign is the width of a punctuation space . We use this property to pad the beginning of numbers   when you use a "-" as the first character of the `f_tostringPad()` formatting string. Our script was written using the PineCoders Coding Conventions for Pine . The description was formatted using the techniques explained in the How We Write and Format Script Descriptions PineCoders publication. █  THANKS Thanks to LonesomeTheBlue for the `f_strReplace()` function. Look first. Then leap.
Pine Script®指標
由PineCoders提供
38
Joseph Nemeth Heiken Ashi Renko MTF StrategyFor Educational Purposes. Results can differ on different markets and can fail at any time. Profit is not guaranteed. This only works in a few markets and in certain situations. Changing the settings can give better or worse results for other markets. Nemeth is a forex trader that came up with a multi-time frame heiken ashi based strategy that he showed to an older audience crowd on a speaking event video. He seems to boast about his strategy having high success results and makes an astonishing claim that looking at heiken ashi bars instead of regular candlestick bar charts can show the direction of the trend better and simpler than many other slower non-price based indicators. He says pretty much every indicator is about the same and the most important indicator is price itself. He is pessimistic about the markets and seems to think it is rigged and there is a sort of cabal that created rules to favor themselves, such as the inability of traders to hedge in one broker account, and that to win you have to take advantage of the statistics involved in the game. He believes fundamentals, chart patterns such as cup and handle and head and shoulders, and fibonacci numbers don't matter, only price matters. The foundation of his trading strategy is based around heiken ashi bars because they show a statistical pattern that can supposedly be taken advantage of by them repeating around seventy or so percent of the time, and then combines this idea with others based on the lower time frames involved. The first step he uses is to identify the trend direction in the higher time frame(daily or 4 hourly) using the color of the heiken ashi bar itself. If it is green then take only long position after the bar completes, if it is red then take only short position. Next, on a lower time frame(1 hour or 30 minutes) look for the slope of the 20 exponential moving average to be sloping upward if going long or the slope of the ema to be sloping downward if going short(the price being above the moving average can work too if it's too hard to visualize the slope). Then look for the last heiken ashi bar, similarly to the first step, if it is green take long position, if it is red take short position. Finally the entry indicator itself will decide the entry on the lowest time frame. Nemeth recommends using MACD or CCI or possibly combine the two indicators on a 5 min or 15 min or so time frame if one does not have access to renko or range bars. If renko bars are available, then he recommends a 5 or 10 tick bar for the size(although I'm not sure if it's really possible to remove the time frame from renko bars or if 5 or 10 ticks is universal enough for everything). The idea is that renko bars paint a bar when there is price movement and it's important to have movement in the market, plus it's a simple indicator to use visually. The exit strategy is when the renko or the lowest time frame indicator used gives off an exit signal or if the above conditions of the higher time frames are not being met(he was a bit vague on this). Enter trades with only one-fifth of your capital because the other fifths will be used in case the trades go against you by applying a hedging technique he calls "zero zone recovery". He is somewhat vague about the full workings(perhaps because he uses his own software to automate his strategy) but the idea is that the second fifth will be used to hedge a trade that isn't going well after following the above, and the other fifths will be used to enter on another entry condition or if the other hedges fail also. Supposedly this helps the trader always come out with a profit in a sort of bushido-like trading tactic of never accepting defeat. Some critics argue that this is simply a ploy by software automation to boost their trade wins or to sell their product. The other argument against this strategy is that trading while the heiken ashi bar has not completed yet can jack up the backtest results, but when it comes to trading in real time, the strategy can end up repainting, so who knows if Nemeth isn't involving repainting or not, however he does mention the trades are upon completion of the bar(it came from an audience member's question). Lastly, the 3 time frames in ascending or descending fashion seem to be spaced out by about factors of 4 if you want to trade other time frames other than 5/15min,30min/1hour, or 4hour/daily(he mentioned the higher time frame should be atleast a dozen times higher than the lower time frame). Personally I have not had luck getting the seventy+ percent accuracy that he talks about, whether in forex or other things. I made the default on renko bars to an ATR size 1 setting because it looks like the most universal option if the traditional mode box size is too hard to guess, and I made it so that you can switch between ATR and Traditional mode just in case. I don't think the strategy repaints because I think TV set a default on the multi-time frame aspects of their code to not re-paint, but I could be wrong so you might want to watch out for that. The zero zone recovery technique is included in the code but I commented it out and/or remove it because TV does not let you apply hedging properly, as far as I know. If you do use a proper hedging strategy with this, you'll find a very interesting bushido type of trading style involved with the Japanese bars that can boost profits and win rates of around possibly atleast seventy percent on every trade but unfortunately I was not able to test this part out properly because of the limitation on hedging here, and who knows if the hedging part isn't just a plot to sell his product. If his strategy does involve the repainting feature of the heiken ashi bars then it's possible he might have been preaching fools-gold but it's hard to say because he did mention it is upon completion of the bars. If you find out if this strategy works or doesn't work or find out a good setting that I somehow didn't catch, please feel free to let me know, will gladly appreciate it. We are all here to make some money!
Pine Script®策略
由SparkyFlary提供
13
sDEFI IndexThe Synthetix Exchange provides a DeFi index that has too many components to be used as a chart ticker. So here is an indicator to bypass the ticker limit. From the Synthetics docs : docs.synthetix.io DeFi Index (sDEFI) Contract: 0xe1aFe1Fd76Fd88f78cBf599ea1846231B8bA3B6B Token | Initial Weight --------------------------- Aave | 15% Synthetix Network Token | 15% yearn.finance | 15% Uniswap | 10% Compound | 7.50% Maker | 7.50% Balancer | 5% Curve DAO Token | 5% Kyber Network | 5% Ren | 5% UMA | 5% Wrapped Nexus Mutual | 5% The chart shows it in comparison to FTX's DeFi index, quite a difference as you can see!
Pine Script®指標
由BilzerianCandle提供
CC - Consolidated Interval Display (CID)Ever wish you didn't have to rapidly flip between 6 different intervals to get the full picture? Yeah, me too. Do you also wish that you kind of understood how the shift / unshift function works for arrays? Yeah, I did too. Both of those birds are taken care of with one stone! The Consolidated Interval Display uses the new Array structure and security to display data for 5m, 15m, 45m, 1h, 4h and 1d intervals SIMUTANEOUSLY! Regardless of which interval you're looking at you can get the full picture of numerical data without flipping around to get it. This is my first script trying to use arrays. It basically shows the following for the given ticker: ATR14, RSI7, RSI14, SMA50, SMA200 and VWAP at the 5 minute level. ATR14, RSI7, RSI14, SMA50, SMA200 and VWAP at the 15 minute level. ATR14, RSI7, RSI14, SMA50, SMA200 and VWAP at the 45 minute level. ATR14, RSI7, RSI14, SMA50, SMA200 and VWAP at the 1 hour level. ATR14, RSI7, RSI14, SMA50, SMA200 and VWAP at the 4 hour level. ATR14, RSI7, RSI14, SMA50, SMA200 and VWAP at the 1 day level. To make it more or less busy, I've allowed you to toggle off any of the levels you wish. I've also chosen to leave this as open source, as it's nothing too experimental, and I hope that it can gain some traction as an Array example that the public can use! If you don't like the different values that are shown, use this source code example as a spring-board to put values that you do care about onto the labels. If this code has helped you at all please drop me a like or some constructive criticism if you do not think it's worth a like. Good luck and happy trading friends. If this gets traction, I will post something similar for a combination of SPY, VIX, GOLD, QQQ, IWM and TLT.
Pine Script®指標
由maigcaloctopus提供
1
Margin Zones 5 (MZE5)Extended version of MZE script. This indicator can be set up for 5 different tickers, so you can fill up your favourite tikers as fixed and switch between them without changing settings options of Tick Count, Margin and POC Using option "Show default Zones if not Matched" - you can set up default options, switching off "Show default Zones if not Matched" - will hide indicator for not matched tikers By default option is Off RUS: Расширенная версия индикатора MZE, которая позволяет сделать настройки одновременно для 5 разных тикеров, соответственно переключаясь между отслеживаемыми тикерами не нужно каждый раз менять настройки. Достаточно один раз настроить базовые настройки к любимым тикерам и только корректировать значение Маржи и Обеспечения. Используя Опцию "Show default Zones if not Matched" ("Показывать, когда нет совпадения") - индикатор будет отображаться для всех тикеров с настройками по умолчанию. И наоборот (по умолчанию): при снятой галочке - индикатор будет отображаться только на тех тикерах, к которым привязан, и не будет мешать на остальных
Pine Script®指標
由renat_a提供
6
Bitcoin Logarithmic Curves OscillatorThis a companion indicator for the Bitcoin Logarithmic Growth Curves indicator. This is an oscillator version of the above. When the indicator is at / near 1 then Bitcoin price is at / near the upper range of its long-term logarithmic growth trend. When at / near 0 then price is at / near the lower range of that trend. This indicator only works with the BLX Brave New Coin Index (ticker:BLX) and only on 1 day, 3 day, or 1 week timeframes.
Pine Script®指標
由quantadelic提供
4
ANN MACD : 25 IN 1 SCRIPTIn this script, I tried to fit deep learning series to 1 command system up to the maximum point. After selecting the ticker, select the instrument from the menu and the system will automatically turn on the appropriate ann system. Listed instruments with alternative tickers and error rates: WTI : West Texas Intermediate (WTICOUSD , USOIL , CL1! ) Average error : 0.007593 BRENT : Brent Crude Oil (BCOUSD , UKOIL , BB1! ) Average error : 0.006591 GOLD : XAUUSD , GOLD , GC1! Average error : 0.012767 SP500 : S&P 500 Index (SPX500USD , SP1!) Average error : 0.011650 EURUSD : Eurodollar (EURUSD , 6E1! , FCEU1!) Average error : 0.005500 ETHUSD : Ethereum (ETHUSD , ETHUSDT ) Average error : 0.009378 BTCUSD : Bitcoin (BTCUSD , BTCUSDT , XBTUSD , BTC1!) Average error : 0.01050 GBPUSD : British Pound (GBPUSD,6B1! , GBP1!) Average error : 0.009999 USDJPY : US Dollar / Japanese Yen (USDJPY , FCUY1!) Average error : 0.009198 USDCHF : US Dollar / Swiss Franc (USDCHF , FCUF1! ) Average error : 0.009999 USDCAD : Us Dollar / Canadian Dollar (USDCAD) Average error : 0.012162 SOYBNUSD : Soybean (SOYBNUSD , ZS1!) Average error : 0.010000 CORNUSD : Corn (ZC1! ) Average error : 0.007574 NATGASUSD : Natural Gas (NATGASUSD , NG1!) Average error : 0.010000 SUGARUSD : Sugar (SUGARUSD , SB1! ) Average error : 0.011081 WHEATUSD : Wheat (WHEATUSD , ZW1!) Average error : 0.009980 XPTUSD : Platinum (XPTUSD , PL1! ) Average error : 0.009964 XU030 : Borsa Istanbul 30 Futures ( XU030 , XU030D1! ) Average error : 0.010727 VIX : S & P 500 Volatility Index (VX1! , VIX ) Average error : 0.009999 YM : E - Mini Dow Futures (YM1! ) Average error : 0.010819 ES : S&P 500 E-Mini Futures (ES1! ) Average error : 0.010709 GAZP : Gazprom Futures (GAZP , GZ1! ) Average error : 0.008442 SSE : Shangai Stock Exchange Composite (Index ) ( 000001 ) Average error : 0.011287 XRPUSD : Ripple (XRPUSD , XRPUSDT ) Average error : 0.009803 Note 1 : Australian Dollar (AUDUSD , AUD1! , FCAU1! ) : Instrument has been removed because it has an average error rate of over 0.13. The average error rate is 0.1850. I didn't delete it from the menu just because there was so much request, You can use. Note 2 : Friends have too many requests, it took me a week in total and 1 other script that I'll share in 2 days. Reaching these error rates is a very difficult task, and when I keep at a low learning rate, they are trained for a very long time. If I don't see the error rate at an average low, I increase the layers and go back into a longer process. It takes me 45 minutes per instrument to command artificial neural networks, so I'll release one more open source, and then we'll be laying 70-80 percent of the world trade volume with artificial neural networks. Note 3 : I would like to thank wroclai for helping me with this script. This script is subject to MIT License on behalf of both of us. You can review my original idea scripts from my Github page. You can use it free but if you are going to modify it, just quote this script . I hope it will help everyone, after 1-2 days I will share another ann script that I think is of the same importance as this, stay tuned. Regards , Noldo .
Pine Script®指標
由Noldo提供
21
Premium/Discount (Input)Used to show Contango or Backwardation in futures contracts vs spot price. You can input your own tickers so can technically can be used to compare anything. * In this example I'm showing Okex Quarterly contract vs Okex spot index price because it showcases it better. * If you are using this after 2019 the default setting will not work because I set it to Bitmex which does not currently have a "current contract in front" ticker available. It should be fairly self explanatory, but just ask below if you have any questions.
Pine Script®指標
由Plumptoiletduck提供
8
ck - Crypto Correlation IndicatorA simple Correlation Indicator initially configured for Crypto Trader use (but other markets can use this too). It plots the correlation between the current chart (say BTCUSD ) versus 4 user-definable indices, currency pairs, stocks etc. By default, the indicator is preconfigured for: GOLD (Oz/$), Dow Jones Index (DJI), Standard & Poor 500 Index (SPX) , Dollar Index ( DXY ) You can set the period (currently 1D resolution) in the "Period" box in the settings, valid inputs are: minutes (number), days (1D, 2D, 3D etc), weeks (1W, 2W etc), months (1M, 2M etc) Length is the lagging period/smoothing applied - default is 14 When changing comparison instruments/tickers, you may find it useful to prefix the exchange with the instrument's ticker, for example: Binance:BTCUSDT, NYSE:GOOG etc *** Idea originally from the brilliant Backtest Rookies - backtest-rookies.com ***
Pine Script®指標
由ChrisKaye提供