立即開始

在腳本中搜尋"a股开盘前15分钟交易规则"

GoTiT|Simple Auto Fib v1.0Simple Auto Fib! Notes: 1. Always set the trend manually! Don't rely on the auto trend detection. 2. The first parameter Length sets the number of candles back (left) to search for highs and lows from the current candle. 3. The High Offset parameter sets the number of candles back (left) to ignore/skip before searching for highs. 4. The Low Offset parameter sets the number of candles back (left) to ignore/skip before searching for lows. 5. The offset parameters change the behavior of the Length parameter. Example 1: Length = 100 High Offset = 0 Low Offset = 0 This is the default behavior, and the search for highs and lows occurs on the last 100 candles. Example 2: Length = 50 High Offset = 20 (Ignore the last 20 candles, and search for highs starting at candle 21 to 71 (or 50 candles back) Low Offset = 15 (Ignore the last 15 candles, and search for lows starting at candle 16 to 66 (or 50 candles back) In example 2, search starts on candle 21 for highs, and candle 16 for lows and extends 50 candles further back from there. 6. The Trend Detection parameter sets the number of candles back (left) to use in the trend calculations. Larger values give better "marco trend" detection. Smaller values give better "micro trend" detection. See note #1. 7. The white fib line is fib0. Assuming you correctly set the trend manually (or the trend is auto detected correctly), in a downtrend fib0 should be bellow the red fib line, and in an uptrend fib0 should be above the red fib line.
Pine Script®指標
由gotit提供
Fractal Resonance BarLazyBear's WaveTrend port has been praised for highlighting trend reversals with precision and punctuality (minimal lag). But strong "3rd Wave" trends can "embed" or saturate any oscillator flashing several premature crosses while stuck overbought/oversold. This happens when the trend stretches over a longer timescale than the oscillator's averaging window or filter time constant. Our solution: monitor many timescales. With Fractal Resonance Bar's rich color codings, strong wavefronts form across timescales and jump out like an approaching line of thunderclouds! Fractal Resonance Bar color-codes the status of eight underlying stochastic oscillators, with each row averaging over twice the time of the row above. Fractal Resonance Bar shifts its timescales along with your choice of main chart timescale: 1 minute chart: 1 minute through 128 minute (~2 hour) oscillators. 15 minute chart: 15 minute through 1920 minute (~32 hour) oscillators. 1 hour chart: 1 hour through 128 hour (~2 week) oscillators. Daily chart: 1 day through 128 day (~4 month) oscillators. The color map is configured as follows: Hot Pink: Extreme Overbought (> 100%) rolled over to sell, but oscillators probably embedded with more upside (revert to Dark Green) possible after a pause. Deep Red: Overbought (> 75%) crossover ripe for selling (validated when red spreads to timescales below). Brown: Minor (< 75%) crossover sell from which could bounce back green or start a plunge toward gray/black. Gray/Black: Mature (< -75%) sells turning full black in a plunge before the dawn. Lime Green: Extreme Oversold (< -100%) and bouncing, though may yet bottom even lower. Green: Oversold (< -75%) crossover ripe for buy. Green spreading to all timescales below will validate bottom is in. Dark Green/Teal: Mature buy in overbought (> 75%) range, waiting for sell crossover to Hot Pink for a pause or correction. White Stripes are Impulsive Trend Warning Fractal Resonance Bar warns of oscillator embedding by showing white stripes when it detects strong, early surges in the timescale rows below.The white stripes usually accompany Hot Pink warning it's too early to go short, or Lime Green warning it's too early to go long. Heeding these warnings will probably miss the exact top or bottom, but you're less likely to get overrun in a momentum move. Usually the market gives us a second opportunity to short very close to the top or buy very close to the bottom after the warning white stripes have subsided. NOTE: Recently rolled over Futures contracts may not have enough history for all oscillator calculations, in which case no bar colors will appear. Tweakable Attributes The default Channel Length, Stochastic Ratio Length and Lag Length work reasonably well on all timescales in our experience. Minor tweaks don't hurt but this may just overfit to a particular chart history. We don't recommend changing the 75% Overbought and 100% Extreme Overbought default levels as these are ideal numbers relative to the underlying oscillator statistic calculations. But these settings can shift the color transition levels. Embedded attribute controls the sensitivity/conservativeness of the white strip embedding detectors. Closer to 75 increases the warning sensitivity while closer to 100 decreases the aggressiveness of blocking white stripes. Embed Separation also affects the white stripe sensitivity. Row width increases each row's thickness to fill the available screen height you've afforded the bar.
Pine Script®指標
由pythagoras提供
12
extended session - Regular Opening-Range- JayyOpening Range and some other scripts updated to plot correctly (see comments below.) There are three variations of the fibonacci expansion beyond the opening range and retracements within the opening range of the US Market session - I have not put in the script for the other markets yet. The three scripts have different uses and strengths: The extended session script (with the script here below) will plot the opening range whether you are using the extended session or the regular session. (that is to say whether "ext" in the lower right hand corner is highlighted or not.). While in the extended session the opening range has some plotting issues with periods like 13 minutes or any period that is not divisible into 330 mins with a round number outcome (eg 330/60 =5.5. Therefore an hour long opening range has problems in the extended session. The pre session script is only for the premarket. You can select any opening range period you like. I have set the opening range to be the full premarket session. If you select a different session you will have to unselect "pre open to 9:30 EST for Opening Range?" in the format section. The script defaults to 15 minutes in the "period Of Pre Opening Range?". To go back to the 4 am to 9:30 pre opening range select "pre open to 9:30 EST for Opening Range?" there is no automatic 330 minute selection. The past days offset script only works in 5 min or 15 minute period. It will show the opening range from up to 20 days past over the current days price action. Use this for the regular session only. 0 shows the current day's opening range. Use the positive integers for number of days back ie 1, 2, 3 etc not -1, -2, -3 etc. The script is preprogrammed to use the current day (0). Scripts updated to plot correctly: One thing they all have in common is a way of they deal with a somewhat random problem that shifts the plots 4 hours in one direction or the other ie the plot started at 9:30 EST or 1:30PM EST. This issue started to occur approximately June 22, 2015 and impacts any script that tried to use "session" times to manage a plot in my scripts. The issue now seems to have been resolved during this past week. Just in case the problem reoccurs I have added a "Switch session plot?" to each script. If the plot looks funny check or uncheck the "Switch session plot?" and see the difference. Of course if a new issue crops up it will likely require a different fix. I have updated all of the scripts shown on this chart. If you are using a script of mine that suffers from the compiler issue then you will find an update on this chart. You can get any and all of the scripts by clicking on the small sideways wishbone on the left middle of the chart. You will see a dialogue box. Then click "make it mine". This will import all of the scripts to your computer and you can play around with them all to decide what you want and what you don't want. This is the easiest way to get all of the scripts in one fell swoop. It is also the easiest way for me to make all of the scripts available. I do not have all of the plots visible since it is too messy and one of the scripts (pre OR) is only for the regular session. To view the scripts click on the blue eye to the right of the script title to show it on this script. If you can only use the regular session. The scripts will all (with the exception of the pre OR) work fine. If for any reason this script seems flakey refresh the page r try a slightly different period. I have noticed that sometimes randomly the script loves to return to the 5 min OR. This is a very new issue transient issue. As always if you see an issue please let me know. Cheers Jayy
Pine Script®指標
由jayy提供
1
BB 100 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 25 with Barcolors".
Pine Script®指標
由rmwaddelljr提供
BB 25 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 100 with Barcolors".
Pine Script®指標
由rmwaddelljr提供
1
KK_Intraday MAsHey guys, today I was browsing through intraday Charts looking at some moving averages. Basically what I wanted to see was whether the currency pair was trading below or above the moving average of the day/week/month. For a better understanding: The daily MA on a 15 minute Forex Chart would be the 96 MA. I encountered the problem that i always had to change the settings for my MAs when changing the Time Interval, so I coded this here up. It is pretty simple but maybe somebody else has the same problem and can put it to use. The script has some settings as listed below: Choice which MAs to plot, (Daily, Weekly, Monthly) Choice which type of MA to use (Simple, Exponential, Weighted) Neccesary Settings for the correct calculation (e.g. Number of trading hours per day). These settings depend on the instrument you are using and should always be checked before using this script. There are a few things to Note when using this script: This script works for intraday charts only. The monthly MA doesn't work on any Time Interval smaller than 15 minutes. Can't do anything about it unfortunately. This is my first published Script, use it with caution and let me know what you think about it!
Pine Script®指標
由Kurbelklaus提供
2
Opening Range Breakout with 2 Profit Targets.Opening Range Breakout with 2 Profit Targets. Updated Indicator now works on all Symbols with Many Different Session Options. ***Known PineScript Issue…While the Opening Range is being Formed the lines only adjust for that individual bar. Just reset Indicator after Opening Range Completes. ***All Times are Based on New York Time Session Options Forex U.S. Banks Open (8:00), Gold U.S. Open (8:20), Oil U.S. Open (9:00), U.S. Cash Session - Stocks (9:30), NY Forex Open (17:00) , Europe Open (02:00), or if you choose Setting 0 the Session Runs from 00:00 to 00:00 (Midnight to Midnight). ***Ability to use 60 minute Opening Range, 30 minute, 15 minute, and many other options. ***However you can manually change the times in the Inputs Tab to adjust for any session you prefer. This is useful for Day Light Savings Adjustments. Also the default times work if your charts are set to EST Time. If you use A different time zone in your settings you need to Adjust the times in the inputs tab. Initially Opening Range High and Low plot as Yellow Lines. If Price Goes Above Opening Range then Line Turns Green. If Price Goes Below Opening Range Line Turns Red. By default the First Profit Target is 1/2 the Width of the Opening Range and the 2nd Profit Target is 1 Times the Opening Range. However these are Adjustable in the Inputs Tab. By Default the Opening Range Length is 1 Hour. However, you can Change the Opening Range Length to 15 min, 30 min, 2 hours etc. in the Inputs Tab. Plots a 1 Above or Below Candle when 1st Profit Target is Achieved, and a 2 when 2nd Profit Target is Achieved.
Pine Script®指標
由ChrisMoody提供
91
Indicator: Trend Trigger FactorIntroduced by M.H.Pee, Trend Trigger Factor is designed to keep the trader trading with the trend. System rules according to the developer: * If the 15-day TTF is above 100 (indicating an uptrend), you will want to be in long positions. * If the 15-day TTF is below -100, you will want to be short. * If it is between -100 and 100, you should remain with the current position. More info: Original Article by Mr.Pee: drive.google.com
Pine Script®指標
由LazyBear提供
15
Pivot Points mura visionWhat it is A clean, single-set pivot overlay that lets you choose the pivot type (Traditional/Fibonacci), the anchor timeframe (Daily/Weekly/Monthly/Quarterly, or Auto), and fully customize colors, line width/style , and labels . The script never draws duplicate sets—exactly one pivot pack is displayed for the chosen (or auto-detected) anchor. How it works Pivots are computed with ta.pivot_point_levels() for the selected anchor timeframe . The script supports the standard 7 levels: P, R1/S1, R2/S2, R3/S3 . Lines span exactly one anchor period forward from the current bar time. Label suffix shows the anchor source: D (Daily), W (Weekly), M (Monthly), Q (Quarterly). Auto-anchor logic Intraday ≤ 15 min → Daily pivots (D) Intraday 20–120 min → Weekly pivots (W) Intraday > 120 min (3–4 h) → Monthly pivots (M) Daily and above → Quarterly pivots (Q) This keeps the chart readable while matching the most common trader expectations across timeframes. Inputs Pivot Type — Traditional or Fibonacci. Pivots Timeframe — Auto, Daily (1D), Weekly (1W), Monthly (1M), Quarterly (3M). Line Width / Line Style — width 1–10; style Solid, Dashed, or Dotted. Show Labels / Show Prices — toggle level tags and price values. Colors — user-selectable colors for P, R*, S* . How to use Pick a symbol/timeframe. Leave Pivots Timeframe = Auto to let the script choose; or set a fixed anchor if you prefer. Toggle labels and prices to taste; adjust line style/width and colors for your theme. Read the market like a map: P often acts as a mean/rotation point. R1/S1 are common first reaction zones; R2/S2 and R3/S3 mark stronger extensions. Confluence with S/R, trendlines, session highs/lows, or volume nodes improves context. Good practices Use Daily pivots for intraday scalps (≤15m). Use Weekly/Monthly for swing bias on 1–4 h. Use Quarterly when analyzing on Daily and higher to frame larger cycles. Combine with trend filters (e.g., EMA/KAMA 233) or volatility tools for entries and risk. Notes & limitations The script shows one pivot pack at a time by design (prevents clutter and duplicates). Historical values follow TradingView’s standard pivot definitions; results can vary across assets/exchanges. No alerts are included (levels are static within the anchor period).
Pine Script®指標
由trading_mura提供
DBG X WOLONG Overview DBG X Wolong is a feature-rich Pine Script v5 indicator/strategy designed to provide a systematic, configurable approach to detecting trade opportunities and managing positions. This free edition combines trend detection, momentum confirmation, volatility sizing and an adaptive grid/TP system into a single workflow that is intended to add practical value beyond a simple indicator mashup What makes this script original & useful Integrated workflow (not a mere mashup): indicators are assigned clear roles in a pipeline — trend → momentum → volatility → scaling/exit — so their outputs interact deterministically to form signals. Adaptive grid + ATR sizing: grid spacing and stop/TP levels adapt to market volatility via ATR, reducing arbitrary parameter dependence. MA cloud & Braid filter: the multi-MA cloud (supporting many MA types) is used as a structural trend/range detector; the Braid filter suppresses noise and confirms stronger trend regimes. Multi-timeframe dashboard: compact view of trend across many TFs to avoid single-TF false signals. Conceptual workflow (how it works, high level) Trend detection: SuperTrend + MA cloud determine the primary bias (bull/bear). Momentum confirmation: RSI and MACD histogram confirm momentum direction or reversals. Volatility sizing: ATR is used to calculate stop levels and to scale position sizing and grid spacing (higher ATR → wider stops & grid) Signal gating / filter: Braid filter and multi-TF confirmation reduce false entries and ensure higher-probability setups.. Grid / TP engine: when a signal triggers, the system can scale into positions across predefined grid steps and compute TP1/TP2/TP3 based on measured move (VWAP/regression or pivot logic), with labels on chart. Visual outputs: colorized candles, entry/stop/take labels, pullback marks and a configurable table/dashboards. Key components & role (concise) SuperTrend: primary trend filter and main signal trigger. MA Cloud / Ribbon (many MA types available): structure, support/resistance, trend validation Braid Filter: noise suppression and signal confirmation. FRAMA / JMA / advanced MA routines: adaptive smoothing options for different market regimes. ATR: volatility measure for dynamic stops and grid spacing. TP Engine / Regression-VWAP logic: adaptive take profit placement and multi-level exits. Dashboard / Multi-TF checks: present TF consensus to avoid contradictory signals. How signals are generated (conceptual) Primary buy: SuperTrend flips bullish + price above short SMA + braid filter confirms + multi-TF bias mostly bullish. Primary sell: SuperTrend flips bearish + price below short SMA + braid filter confirms + multi-TF bias mostly bearish. Reversal/pullback markers: RSI crossing thresholds with additional confirmations. (Exact thresholds and gating are configurable in inputs.). Inputs summary (important ones to show in the publish dialog) Sensitivity (SuperTrend tuning): 1–20 (default 6) MA cloud cycles & ribbon choices (8 cycle settings) Braid filter type & strength (percent) ATR length & ATR risk multiplier (for SL and sizing). Dashboard: enable/position/size, show/hide signals, pullback toggles. TP mode (pivot/regression), TP multiplier and lengths Recommended usage & presets Sensitivity (SuperTrend tuning): 1–20 (default 6) MA cloud cycles & ribbon choices (8 cycle settings) Braid filter type & strength (percent) ATR length & ATR risk multiplier (for SL and sizing). Dashboard: enable/position/size, show/hide signals, pullback toggles. TP mode (pivot/regression), TP multiplier and lengths Recommended usage & presets Scalping: TF 1–5 minutes; sensitivity higher (8–12); use only SuperTrend + Braid filters; TP1 only. Intraday: TF 15–60 minutes; sensitivity medium (6–8); use full grid with ATR-based stops. Swing: TF H1–D1; sensitivity lower (4–6); enable full indicators and multi-TF confirmations. Always backtest and demo-trade settings before using live. Limitations & safeguards Market conditions (thin liquidity, news) can still produce false signals; use multi-TF filter and turn off signals near major events. This free edition is intended for learning; advanced/premium variants may include additional proprietary optimizations. Not investment advice — use proper money management and test before trading real capital. Backtesting & validation Backtest over multiple symbols and regimes (trending vs ranging) to find robust settings.. Use the dashboard to visualize TF alignment and exclude signals when mismatch occurs. Keep trade frequency reasonable to avoid overfitting small sample sets. Publishing notes (for moderators/reviewers) This description explains how indicators combine in a defined workflow and why each component is used; it demonstrates originality (adaptive grid + ATR-based sizing + MA cloud + Braid filter as a cohesive strategy), not just a superficial mashup. The code exposes configurable inputs and visual outputs; the long description gives sufficient conceptual detail for users and moderators to evaluate the script without exposing proprietary implementation details.
Pine Script®指標
由ionmarpie提供
Day Range Breakout Strategy + Trend Structure Filter🚀 Enhanced Strategy for Breaking Previous Day’s Extremes with Market Structure-Based Trend The strategy focuses on breakouts of previous day’s highs and lows, filtered by trend direction based on market structure. 🔑 Key Improvements 1️⃣ Solved the repainting issue. There are similar strategies in the community, but the historical results of those algorithms do not correspond to the results of real backtesting. 2️⃣ Added a trend filter. In most cases, this makes it possible to achieve higher profitability. It works as follows: The script determines market structure based on a defined number of previous candles. If there are higher highs and higher lows, this is considered an uptrend structure. If there are lower highs and lower lows, this is considered a downtrend structure. The trend filter is adjusted using the Lookback Period setting. 3️⃣ Choice of entry principle. Implemented the ability to choose whether trades are opened based on closing prices or by high/low breakout, which allows finding the optimal settings for a specific instrument. 4️⃣ Improved entry/exit logic. When an opposite signal appears, before entering a trade, the script first closes the previous position. ✅ This makes the strategy fully ready for algorithmic trading via webhook on any exchange that supports this function. 5️⃣ Better visualization. 🟥 Red and 🟩 green backgrounds indicate the trend direction. ⚙️ How It Works The principle of the strategy as follows: Wait for the breakout of the previous day’s high or low. Enter long on a breakout of the high, or short on a breakout of the low in the market structure trend direction. Exit occurs on the breakout of the opposite extreme. 📈 This allows capturing long trends. ⚠️ But, like all similar strategies, in a sideways market it produces losing trades. ⚙️ Default Settings Breakout Confirmation: The breakout is determined by the candle close. You can also choose high/low, but this often gives more false signals. However, on some assets, it may show higher profitability in backtesting. Trend Structure Period: The default value is 15. This means the script analyzes the last 15 candles on the selected timeframe to determine market structure as described above. Position Size: Fixed at $1,000, which is 1% of the initial capital of $100,000 to keep risks under control. Commission: Set to 0.1%, which is sufficient for most cryptocurrency exchanges. Slippage: Configured at 1 tick. Funding Note: Keep in mind that funding is not included in this strategy. It’s impossible to predict whether it will be positive or negative, and it can vary significantly across exchanges, so it is not part of the default settings. 🕒 Recommended Settings Timeframe: 1H and higher On lower timeframes → significant discrepancies may occur between historical and real backtesting data. On higher timeframes → minor differences are possible, related to slippage, sharp moves, and other unpredictable situations. ⚠️ Important Notes Always remember: Strategy results may not repeat in the future. The market constantly changes, so: ✅ Monitor the situation ✅ Backtest regularly ✅ Adjust settings for each asset Also remember about possible bugs in any algorithmic trading strategy. Even if a script is well-tested, no one knows what unpredictable events the market may bring tomorrow. ⚠️ Risk Management: Do not risk more than 1% of your deposit per trade, otherwise you may lose your account balance, since this strategy works without stop losses. ⚠️ Disclaimer The author of the strategy does not encourage anyone to use this algorithm and bears no responsibility for any possible financial losses resulting from its application! Any decision to use this strategy is made personally by the owners of TradingView accounts and cryptocurrency exchange accounts. 📝 Final Notes This is not the final version. I already have ideas on how to improve it further, so follow me to not miss updates. 🐞 Bug Reports If you notice any bugs or inconsistencies in my algorithm, please let me know — I will try to fix them as quickly as possible. 💬 Feedback & Suggestions If you have any ideas on how this or any of my other strategies can be improved, feel free to write to me. I will try to implement your suggestions in the script. Wishing everyone good luck and stable profits! 🚀💰
Pine Script®策略
由Script_Algo提供
BTC Macro Composite Global liquidity Index -OffsetThis indicator is based on the thesis that Bitcoin price movements are heavily influenced by macro liquidity trends. It calculates a weighted composite index based on the following components: • Global Liquidity (41%): Sum of central bank balance sheets (Fed , ECB , BoJ , and PBoC ), adjusted to USD. • Investor Risk Appetite (22%): Derived from the Copper/Gold ratio, inverse VIX (as a risk-on signal), and the spread between High Yield and Investment Grade bonds (HY vs IG OAS). • Gold Sensitivity (15–20%): Combines the XAUUSD price with BTC/Gold ratio to reflect the historical influence of gold on Bitcoin pricing. Each component is normalized and then offset forward by 90 days to attempt predictive alignment with Bitcoin’s price. The goal is to identify macro inflection points with high predictive value for BTC. It is not a trading signal generator but rather a macro trend context indicator. ❗ Important: This script should be used with caution. It does not account for geopolitical shocks, regulatory events, or internal BTC market structure (e.g., miner behavior, on-chain metrics). 💡 How to use: • Use on the 1D timeframe. • Look for divergences between BTC price and the macro index. • Apply in confluence with other technical or fundamental frameworks. 🔍 Originality: While similar components exist in macro dashboards, this script combines them uniquely using time-forward offsets and custom weighting specifically tailored for BTC behavior.
Pine Script®指標
由electronicRhin4023提供
[quantish.io] ORB - Opening Range BreakoutsA streamlined opening range breakout indicator focused purely on identifying and signaling potential entry points. This simplified version removes complex profit-taking and risk management features to provide clear, actionable breakout signals. Key Features Multiple ORB Timeframes - 15 minutes to 4 hours opening range periods Clean Breakout Detection - Simple close-based signals above/below opening range Trade Window Control - Optional time limit for valid entries after ORB period Visual Clarity - Shaded opening range zones with optional trade windows Entry Signals - Clear "Bullish" and "Bearish" labels with dotted entry lines Customizable Display - Toggle opening range, trade window, and entry signal visibility Entry Alerts - Real-time notifications when breakout conditions are met Custom Sessions - Define your own market opening times if needed Best Used For Intraday trading on sub-60 minute timeframes. Ideal for traders who prefer to manage their own exits and risk management while getting clean entry signals based on opening range breakouts. Important Notes This indicator provides entry signals only - no exit or risk management guidance Works on all markets with defined opening sessions Always use proper position sizing and risk management Test thoroughly before live trading Simplified from the original FluxCharts ORB indicator with enhanced visuals and focused functionality.
Pine Script®指標
由kasinath提供
Liquidity Sweep ReversalOverview The Liquidity Sweep Reversal indicator is a sophisticated intraday trading tool designed to identify high-probability reversal opportunities after liquidity sweeps occur at key market levels. Based on Smart Money Concepts (SMC) and Institutional Order Flow analysis, this indicator helps traders catch market reversals when stop-loss clusters are hunted. Key Features 🎯 Multi-Level Liquidity Analysis Previous Day High/Low (PDH/PDL) detection Previous Week High/Low (PWH/PWL) tracking Session highs/lows for Asian, London, and New York markets Real-time level validation and usage tracking ⚡ Advanced Signal Generation CISD (Change In State of Delivery) detection algorithm Engulfing pattern recognition at key levels Liquidity sweep confirmation system Directional bias filtering to avoid false signals ⏰ Kill Zone Integration Pre-configured optimal trading windows Asian Kill Zone (20:00-00:00 EST) London Kill Zone (02:00-05:00 EST) New York AM/PM Kill Zones (08:30-11:00 & 13:30-16:00 EST) Optional kill zone-only trading mode 🛠 Customization Options Multiple timezone support (NY, London, Tokyo, Shanghai, UTC) Flexible HTF (Higher Time Frame) selection Adjustable signal sensitivity Visual customization for all levels and signals Hide historical signals option for cleaner charts How It Works The indicator continuously monitors price action around key liquidity levels When price sweeps liquidity (stop-loss hunting), it marks potential reversal zones Confirmation signals are generated through CISD or engulfing patterns Trade signals appear as arrows with color-coded candles for easy identification Best Suited For Intraday traders focusing on 1m to 15m timeframes Smart Money Concepts (SMC) practitioners Scalpers looking for high-probability reversal entries Traders who understand liquidity and market structure Usage Tips Works best on liquid forex pairs and major indices Combine with volume analysis for stronger confirmation Use proper risk management - not all signals will be winners Monitor higher timeframe bias for better accuracy ============================================== 日内流动性掠夺反向开单指标 指标简介 这是一款基于Smart Money概念（SMC）开发的高级日内交易指标，专门用于识别市场在关键价格水平扫除流动性后的反转机会。通过分析机构订单流和流动性分布，帮助交易者精准捕捉止损扫单后的市场反转点。 核心功能 多维度流动性分析 前日高低点（PDH/PDL）自动标记 前周高低点（PWH/PWL）动态跟踪 亚洲、伦敦、纽约三大交易时段高低点识别 关键位使用状态实时监控，避免重复信号 智能信号系统 CISD（Change In State of Delivery）算法检测 关键位吞没形态识别 流动性扫除确认机制 方向过滤系统，大幅降低虚假信号 黄金交易时段 内置Kill Zone时间窗口 支持亚洲、伦敦、纽约AM/PM四个黄金时段 可选择仅在Kill Zone内交易 时区智能切换，全球交易者适用 个性化设置 支持多时区切换（纽约/伦敦/东京/上海/UTC） HTF周期自动适配或手动选择 信号灵敏度可调 所有图表元素均可自定义样式 历史信号隐藏功能，保持图表整洁 适用人群 日内短线交易者（1分钟-15分钟） SMC交易体系践行者 追求高胜率反转入场的投机者 理解流动性和市场结构的专业交易者 使用建议 推荐用于主流加密货币、外汇对和股指期货 配合成交量分析效果更佳 严格止损，理性对待每个信号 关注更高时间框架的趋势方向 风险提示： 任何技术指标都不能保证100%准确，请结合自己的交易系统和风险管理使用。
Pine Script®指標
由fantuan6提供
Market Pulse Dip RadarThis indicator is designed to help traders spot meaningful dips in price and then evaluate whether those dips are worth trading or not. It doesn’t just mark a dip; it also helps with risk management, trade planning, and filtering out weak signals. Here’s how it works: First, it looks at the recent high price and checks how much the market has dropped from that high. If the drop is larger than the minimum percentage you set, it marks it as a potential dip. Next, it checks the trend structure by using two moving averages (a fast one and a slow one). If the fast average is below the slow average, it means the market is in a weaker structure, and that dip is considered more valid. On top of that, you can enable a multi-timeframe filter. For example, if you are trading on the 15-minute chart, you can ask the indicator to confirm that the 1-hour trend is also supportive before showing you a dip. This helps avoid trading against the bigger trend. Risk management is built in. The indicator automatically suggests a stop-loss by combining volatility (ATR) and recent swing lows. It then draws three profit target levels (1x risk, 2x risk, and 3x risk). This makes it easier to plan where to exit if the trade works. A key part of this tool is the confidence score. Each dip signal is rated from 0 to 100. The score depends on how deep the dip is, how far apart the moving averages are, how healthy volatility is, and whether the higher timeframe supports the trade. The score is then labeled as High, Medium, Low, or Wait. This helps traders focus only on the stronger setups. On the chart, dip signals are marked with a diamond shape under the bars. The color of the diamond tells you if it’s high, medium, or low quality. When a signal appears, the indicator also plots horizontal lines for the entry, stop, and targets. To make it easier to read, there is also a dashboard box that shows the current score, quality, dip percentage, and suggested stop-loss. This means you don’t have to calculate or check different things yourself – everything is visible in one place. Finally, it comes with alerts. You can set alerts for when a dip signal happens, or when it’s medium or high confidence. This way, you don’t need to stare at charts all day; TradingView can notify you. So in short, this tool: • Finds dips based on your rules. • Filters them using structure, volatility, and higher timeframe trend. • Suggests stop-loss and profit targets. • Rates each dip with a confidence score. • Shows all this info in a clean dashboard and alerts you when it happens. 👉 Do you want me to now explain how a trader would actually use it in practice (step by step, from signal to trade)?
Pine Script®指標
由SupertradeOfficial提供
Smart Multi-Confirm Reversal DetectorHow the Smart Multi-Confirm Reversal Detector Works The indicator works by analyzing candlestick patterns, trend, and technical confirmations and then scoring each bar to determine the strength of a potential reversal. Here’s the step-by-step logic: Step 1: Analyze Candlestick Patterns For each new candle, the indicator checks if any of the selected patterns occur: Wick Reversal (Long Lower Wick): Looks for candles with a small body and a long lower shadow. Indicates buying pressure (potential bullish reversal). Inverted Wick (Long Upper Wick): Looks for candles with a small body and a long upper shadow. Indicates selling pressure (potential bearish reversal). Body Engulf: The current candle completely “engulfs” the previous candle. Signals a strong change in momentum. Tweezer Patterns: Two consecutive candles with almost identical highs or lows. Suggests a potential reversal zone. 3-Bar Pattern: Three consecutive bullish or bearish candles in a row. Shows strong momentum continuation or exhaustion, used to confirm reversal. Each pattern can be turned on/off by the user. If a pattern is detected, it contributes points to the overall signal score. Step 2: Confirm Trend Direction The indicator checks EMA trend alignment: Fast EMA vs Slow EMA: Fast EMA above Slow EMA → bullish trend. Fast EMA below Slow EMA → bearish trend. Optional Higher Timeframe EMA (HTF) Alignment: Checks if the trend on a higher timeframe matches the current trend. Adds extra weight to the signal if alignment is true. This ensures the signal goes in the direction of the prevailing trend, reducing false signals. Step 3: Check Technical Confirmations Optional filters increase reliability: ADX (Average Directional Index): Measures the strength of the current trend. Only strong trends contribute to the score. RSI (Relative Strength Index): Bullish confirmation: RSI is oversold. Bearish confirmation: RSI is overbought. Volume Spike: Compares current volume to the average volume. High volume validates the signal’s momentum. Body Momentum: Compares current candle’s body size to its average. Larger than average body indicates stronger momentum. Each of these confirmations can be enabled/disabled and has a weight in the scoring system. Step 4: Calculate Score Each pattern and confirmation has a user-defined weight (0–100). The indicator sums the active weights that pass conditions and normalizes to 100. Example: Wick Reversal detected → 30 points Trend EMA confirmed → 15 points ADX confirmed → 10 points Score = 55/100 → may or may not trigger a signal depending on threshold. Score Threshold: Only bars above the user-defined threshold are considered a confirmed signal. Bars above a lower “label threshold” still show a label, even if not strong enough for alerts. Step 5: Visualize Signals Bullish Signals: Green triangle below the candle. Bearish Signals: Red triangle above the candle. Labels: Show the type of pattern and the score. Purpose: Quickly identify potential reversals and assess their strength visually. Step 6: Optional Alerts Fixed alert messages can be enabled for confirmed bullish or bearish signals. Alerts do not recommend trades; they just notify you of pattern confirmations. Complies with TradingView’s policy for safe alert use. Step 7: Weighted Decision The final decision is not binary. Instead, the indicator combines multiple signals into a score, so stronger signals are more reliable. This reduces false positives and gives traders a professional, multi-confirmation approach to detect potential reversals.
Pine Script®指標
由tradingbauhaus提供