立即開始

在腳本中搜尋"bollingerband"

Uber Dank CCI + Captain Beefheart Bollinger Bands ExtraordinareIntroducing, the Uber Dank CCI + Captain Beefheart Bollinger Bands Extraordinaire Its bollinger bands, CCI and CCI Bollinger Bands all in one. The color of the CCI shows the condition of the bollinger band on chart. Close > upper band = red Close > basis = yellow Close < basis = blue Close < lower band = green Then a bollinger band is printed on the CCI itself, The background color displays the condition of the CCI bollinger band by the same logic as the CCI color. CCI > upper band = red CCI > basis = yellow CCI < basis = blue CCI < lower band = green The exclamation marks tell you when the conditions are coming to an end. They check the last two bars to see if both the CCI and the closing price are under their bollinger bands at the same time for at least one of those bars, and they check the current bar that at least one of those conditions has ended. That is why they will most often print two exclamation marks in a row.
Pine Script®指標
由burgercrisis提供
2
Tradingview ToolkitA new trader's biggest barrier to entry is lack of understanding where they are in terms of time and price and with tradingview free they are often limited to just 1 or 2 extra indicators as many new traders slap on RSI and MACD as 2/3 free ones. While these indicators are fine for trend analysis, its important to know where the price is in relation to time. Thus, this all-in-one script is meant to have a lot of customizable utility to save on indicator spots and act as a hotspot for many common needs. -2 Sets of VWAP line w/ standard deviation bands with customizable timeframes. -1 more customizable timeframe VWAP line (no std dev bands) to use as a long time frame reference -Ability to plot previous VWAP close prices over current timeframe on all VWAP lines w/ basic color changing if price closes above/below -2 Sets of Bollinger Bands with customizable source length and MA type -3 customizable moving averages with custom timeframe/resolutions -Inside candle barcolor repainter to easily notice if a candle was inside the range of the previous candle (price contraction) Not meant to have everything on at once, but simply a place to enable and disable different things and save spots for more important things
Pine Script®指標
由imbes提供
2
[EURUSD60] BB Expansion StrategyOverview This is a strategy that can be used in the EURUSD 60 time frame. It is a trend-following method that uses Bollinger Bands Expansions. The idea of using Bollinger Bands expansion is well known to the general public, but I don’t know any strategy that this idea has been PINE coded. The three main components of this strategy are as follows. ・Long term BB and Short term BB : When the short term BB expands more than the long term BB, it suggests the occurrence of a trend. ・14EMA of 240 t/f : The direction of 14EMA of the upper time frame is used as the trend direction. ・ATR lines : As a stop-loss line and a take-profit line. Description Fig. Long entry pattern Fig. Short entry pattern ・Description of lines Gray : Large BB (=Long term BB) White : Small BB (=Short term BB) Blue or Red line : Upper t/f EMA(default: 14EMA), blue is up-trend, red is down-trend Yellow : Stop loss line by ATR(the term is 14) Purple : Take profit line by ATR(the term is 14) ・Description of strategy First of all, when the small BB expands more than the large BB, this strategy detects the occurrence of a trend. Second, When the price crosses over or crosses under small BB basis, this strategy entries long or short to trend direction (by upper time frame 14EMA). The default stop-loss range is three times ATR value, and the default take-profit target is 1.5 times the stop-loss range (=risk reward ratio is 1.5).
Pine Script®策略
由kasaism提供
Advance AMA with Sylvain BandsMany traders believe that the moving averages are favorite tools and analysts have spent decades trying to improve moving averages partiularly the simple moving average. One way to address the disadvantages of moving averages is to multiply the weighting factor by a volatility ratio which is called Adaptive moving averages. This indicator uses an special adaptive moving averages which is developed by John Ehlers. The model adapts to price movement “based on the rate change of phase as measured by the Hilbert Transform Discriminator”. This method of adaptation features a fast and a slow moving average so that the composite moving average swiftly responds to price changes and holds the average value until the next bars close. In addition, the smoothed Volatility Bands were created by Sylvain Vervoort is included.
Pine Script®指標
由master-in-chart提供
7
HARSI - HeikinAshi RSI (with Bollinger Bands)This is my first published script. I hope it might be useful! This is a modified RSI that attempts to give smoother values. It takes 4 different input lengths and plots them in a similar way as Heikin-Ashi candles does. It can be used in the same way as a regular RSI. It also includes Bollinger Bands that might help identify overbought/oversold situations. The script uses a slightly modified Allanster's 'Heikin Ashi source function' (many thanks for that very useful script!).
Pine Script®指標
由javabgar提供
25
Easy Entry/Exit Trend Colors (With Alerts)This is an updated version of user Algokid's script called 'AK MACD BB INDICATOR V 1.00'. You can find that original script here: I added many alerts along with the Bullish and Bearish alerts when the MACD crosses over the Upperband or crosses down on the Lowerband. I personally use this indicator with Crypto charts (Bitcoin on a 15min, 1hour, and 4 hour timeframe) as one of many confirmations that it's a good time to enter a trade. This script was made to be easy to follow with the colors of GREEN triangles being a good uptrend or entry confirmation, and RED being a confirmation to sell/short or exit your trade. It's important to use this indicator in combination with other indicators that can give you more confirmations to enter or exit a trade, and make sure you are on normal candles and not HA or any other candles as you can get wildly inaccurate results. This script also has the Death & Golden crosses, which is the slow and fast moving averages crossing over each other. I don't use this as an additional confirmation, it's just nice to know where the cross happens.
Pine Script®指標
由countseven12提供
46
Bollinger Band + RSI + ADX + MACD + HeikinashiThis script takes into picture Bollinger Bands, RSI with a comparator value, ADX with a comparator value, and MACD with Heikinashi Direction THIS IS A LONG-ONLY STRATEGY. SHORT TRADES ARE NOT INCLUDED Strategy: The Strategy takes a trade only after ALL the following conditions are met. Candle low is lower than the Bollinger Lower band RSI is higher than the comparator value ADX is higher than the comparator value MACD value is higher than the Signal value Stop Loss : Max of (Low of the candle - 0.22% and Close of the candle - 0.32%) - FYI, because its max, it's lower of the 2 and your risk is lesser Target : Max of (Bollinger Band Upper band and 0.75% of the value of underlying) - FYI, it takes the maximum available
Pine Script®策略
由TradeUsingPivots提供
3
Smoothed Volatility Bands [CC]The Smoothed Volatility Bands were created by Sylvain Vervoort (Stocks and Commodities Sep 2020 pg 19) and this is a heavily customized version of regular Bollinger Bands that take volatility into account. Feel free to change the moving average since Vervoort recommended trying that out. Buy when the indicator line turns green and sell when it turns red. Let me know if there are any other indicators you want me to publish!
Pine Script®指標
由cheatcountry提供
1
2 Multi-Timeframe Bollinger BandsThis is two separate Bollinger bands in one study. Customizable middle BB line type ( SMA , EMA , VWMA ), legnth, colors, and deviations provided at .5 increments. Someone else has a very similar Bollinger Band study but the code was hidden, so I figured I would remake as a learning challenge since I'm new to pinescript and this is the best way to learn it imo. There will be updates to this script in the future but for now it serves its purpose lol. Publishing this version early as I wanted to give some friends access to it In terms of usage, I like 4h 50 SMA alot . Having two sets of Bollinger bands is nice so you can turn one off or swap between time frames and such. In terms of techniques using both bbands, I haven't really played with it too much yet but simple things like 1h 50sma bbands expanding past the 4h 50sma bbands probably indicate an exaggerated move in that specific time frame, etc etc. Hope this helps!
Pine Script®指標
由imbes提供
1
Bollinger Bands Bar ColoringThis is a simple script that colors bars/candles based on where price is relative to the basis, and the upper and lower bands of the Bollinger Bands. If price is above the basis, candles will be colored green, and if price is below the basis, candles will be colored red. If price is outside of the bands on either side, the candles will be colored a darker shade of either color depending on if it is above or below. I created this indicator because I like that at a glance I can have an idea of the bullishness or bearishness of price action based on the Bollinger Bands, without actually having the Bands overlayed on my charts. It's also quite nice because I find that the areas where there is a shift in candle color (especially from green to red and vice versa) aid in identifying levels of support and resistance, and shifts in market structure. I have another indicator that is a huge modification of the Bollinger Bands %B, which includes the candle coloring (and MAs), but this frees up space on my chart while still providing me with the primary information I'm looking for.
Pine Script®指標
由ClassicScott提供
2
VWMACDV2 w/Intraday Intensity Index Histogram & VBCB Hello traders! In this script i tried to combine Kıvanç Özbilgiç's Volume Based Coloured Bars, Volume Weighted Macd V2 and Intraday Intensity Index developed by Dave Bostian and added to Tradingview by Kıvanç Özbilgiç. Let's see what we got here; VBCB, Paints candlestick bars according to the volume of that bar. Period is 30 by default. If you're trading stocks, 21 should be better. Volume Weighted Macd V2, "Here in this version; Exponential Moving Averages used and Weighted by Volume instead of using only vwma (Volume Weighted Moving Averages)." Says, Kıvanç Özbilgiç. III, "A technical indicator that approximates the volume of trading for a specified security in a given day. It is designed to help track the activity of institutional block traders and is calculated by subtracting the day's high and low from double the closing price, divided by the volume and multiplied by the difference between the high and the low." *Histogram of vwmacd changes color according to the value of III. (Green if positive, yellow if negative value)* VWMACD also comes with the values of 21,13,3... Which are fibonacci numbers and that's how i use it. You can always go back to the good old 26,12,9. Other options according to the fibonacci numbers might be= 21,13,5-13,8,3-13,8,5... (For shorter terms of trading) Trading combined with the bollinger bands is strongly advised for both VWMACD and III. VBCB is just the candy on top :) Enjoy!
Pine Script®指標
由lucidreamer15提供
5
Squeeze Momentum [Plus]The "Momentum" in this indicator is smoothed out using linear regression. The Momentum is what is displayed on the indicator as a histogram, its purpose is obvious (to show momentum). What is a Squeeze? A squeeze occurs when Bollinger Bands tighten up enough to slip inside of Keltner Channels . This is interpreted as price is compressing and building up energy before releasing it and making a big move. Traditionally, John Carter's version uses 20 period SMAs as the basis lines on both the BB and the KC. In this version, I've given the freedom to change this and try out different types of moving averages. The original squeeze indicator had only one Squeeze setting, though this new one has three. The gray dot Squeeze, call it a "low squeeze" or an "early squeeze" - this is the easiest Squeeze to form based on its settings. The orange dot Squeeze is the original from the first Squeeze indicator. And finally, the yellow dot squeeze, call it a "high squeeze" or "power squeeze" - is the most difficult to form and suggests price is under extreme levels of compression. Now to explain the parameters: Squeeze Input - This is just the source for the Squeeze to use, default value is closing price. Length - This is the length of time used to calculate the Bollinger Bands and Keltner Channels . Bollinger Bands Calculation Type - Selects the type of moving average used to create the Bollinger Bands . Keltner Channel Calculation Type - Selects the type of moving average used to create the Keltner Channel. Color Format - you to choose one of 5 different color schemes. Draw Divergence - Self explanatory here, this will auto-draw divergence on the indicator. Gray Background for Dark Mode - to make them more visually appealing. Added ADX (Average Directional Index) that measure a trend’s strength. The higher the ADX value, the stronger the trend. The ADX line is white when it has a positive slope, otherwise it is gray. When the ADX has a very large dispersion with respect to the momentum histogram, increase the scale number. Added "H (Hull Moving Average) Signal". Hull is a extremely responsive and smooth moving average created by Alan Hull in 2005. Have option to chose between 3 Hull variations. Added "Williams Vix Fix" signal. The Vix is one of the most reliable indicators in history for finding market bottoms. The Williams Vix Fix is simply a code from Larry Williams creating almost identical results for creating the same ability the Vix has to all assets. The VIX has always been much better at signaling bottoms than tops. Simple reason is when market falls retail traders panic and increase volatility, and professionals come in and capitalize on the situation. At market tops there is no one panicking... just liquidity drying up. The FE green triangles are "Filtered Entries" The AE green triangles are "Aggressive Filtered Entries"
Pine Script®指標
由OskarGallard提供
57
Bollinger Band Calculation ToolIntroducing the Bollinger Band Calculation Tool What are Bollinger Bands ? According to Investopedia .... "In the 1980s, John Bollinger, a long-time technician of the markets, developed the technique of using a moving average with two trading bands above and below it. Unlike a percentage calculation from a normal moving average, Bollinger Bands® simply add and subtract a standard deviation calculation. Standard deviation is a mathematical formula that measures volatility, showing how the stock price can vary from its true value. By measuring price volatility, Bollinger Bands® adjust themselves to market conditions. This is what makes them so handy for traders; they can find almost all of the price data needed between the two bands." Classic interpretations of Bollinger bands from Fidelity Investments.... "When the bands tighten during a period of low volatility, it raises the likelihood of a sharp price move in either direction. This may begin a trending move. Watch out for a false move in opposite direction which reverses before the proper trend begins. When the bands separate by an unusual large amount, volatility increases and any existing trend may be ending. Prices have a tendency to bounce within the bands' envelope, touching one band then moving to the other band. You can use these swings to help identify potential profit targets. For example, if a price bounces off the lower band and then crosses above the moving average, the upper band then becomes the profit target. Price can exceed or hug a band envelope for prolonged periods during strong trends. On divergence with a momentum oscillator, you may want to do additional research to determine if taking additional profits is appropriate for you. A strong trend continuation can be expected when the price moves out of the bands. However, if prices move immediately back inside the band, then the suggested strength is negated." This indicator contains a standard set of Bollinger Bands with the addition of a Test Closing Price calculation function. It displays a standard set of Bollinger Bands by default. How do I use the Test Closing Price function ? Enter a test price in the Test Closing Price box in the settings, and then click the "Use Test Price" button. The indicator will then replace the current Bollinger upper, lower and basis-lines with plots showing the resultant lines if price were to close at the Test Closing Price. An information panel will appear which displays the test closing price and the resulting Bollinger-upper, Bollinger-lower and basis-line prices. Can display up to 10 decimal places and has adjustable label offset. It will also plot lines outlining the resultant closed candle body for clarity. To return to "Standard Bollingers" just click off the "Use Test Price" button. Knowing exactly what the Bollinger bands and Basis will do if a particular closing price is met can be useful in a variety of ways to traders who use Bollinger Bands® in their trading. It is possible to work out exactly what closing price is required to get above or below a Bollinger band which is normally difficult as Bollingers react to the change in price. Users can also experiment with different Test Closing Prices [/i to see exactly what effect this would have on the Basis moving average and on the Bollinger bands themselves.
Pine Script®指標
由The_Caretaker提供
4
Angle of Bollinger Bands AlertThis script is used to calculate angle of Bollinger Bands and also setup alerts. The angle is based on the rules: - if the previous 2 is 1.1, previous 1 is 1, and the current is 1.1, then the angle should be 90 degrees. - if the previous 2 is 0.9, previous 1 is 1, and the current is 0.9, then the angle should be 270 degrees If upper angle is below 90 degrees and close is above the average, it is long signal. If lower angle is above 270 degrees and close is below the average, it is short signal. - It is good for catch trend trading. - Not good for swing trading as the BB changes are very tiny but angles for upper may hit below 90 degrees or angle of lower may be above 270 degrees.
Pine Script®指標
由Jesse.Lau提供
3
Bollinger on Bollinger OscillatorThis study is a user-friendly workaround to the BBOE+ (attached at the bottom). I applied Bollinger Bands on BB Oscillator which spend his time bouncing between +100 -100 levels both representing extremes market conditions. You can use it to spot reliable entries/exits opportunities. During an uptrend when the oscillator tends to -100 and the lower BB turn up you should consider a BUY. Do the same thing when the oscillator pushes under the lower BB nearby the Zero Line. Make the opposite during a downtrend. Also look for divergencies that occurs nearby the borders and BB squeezes too. You can vary both the lenght for the Oscillator and BB. Use “Upper Multiplier” and “Lower Multiplier” to set two different StDev from the basis (if you need). You may also consider to apply an offset to the BB. Is up to you to match the configuration that better-fits your market and time frame. Default settings could well fits this IXIC 4H Chart. So that this is basically a price-based indicator you would better consider to pair it with a volume-based or an absolute-momentum-based one. SHARING IS INTENDED FOR EDUCATIONAL PURPOSE ONLY. NOT FOR PROFESSIONAL USE. WILL APPRECIATE ANY FEEDBACK, QUESTION, SUGGESTION. (*) (*) Please don’t ask me for “magic-setting” that do not exit, nor for “kaleidoscopic effects” cause I’m a big fan of such a minimalistic yet profession layouts. FOLLOW UP TO CHECK UPDATES!
Pine Script®指標
由Federico_TSL提供
6
Baus BandsThe Baus Bands are a simplified version of another one of my trend following indicators, the Neapolitan Bands. This version only shows the trend trading zones in green and red. An additional 21 EMA with an ATR band was added as part of my own trend trading rules using these bands. How do I read this indicator? Is the blue band between and not touching the green or red clouds? The condition is ranging. Is the blue band touching the green cloud? The condition is a bullish trend. Is the blue band touching the red cloud? The condition is a bearish trend. The trend trading rules are exactly the same as the default Neapolitans, but include an extra condition. A trend has started once 2 conditions are met: Price has entered either trending cloud. The 21 EMA ATR band in blue is within the same cloud. With those conditions met, if you expect the trend to continue, trade pull-backs to the blue band in the direction of the trending cloud. Isn't this just a 21 EMA trading pull-backs strategy? No. The 21 EMA alone is not sufficient in my opinion to define a range or trend technically. Always buying the 21 EMA pull-back, especially in a range, is not a great strategy by itself unless you've already identified price as trending. Baus Bands adds that trend identification. Why make this? Baus Bands show the conditions I personally use for catching trends and identifying ranges with these indicators, and shows only the information I use. What's the purpose of the ATR band around the 21 EMA? Sometimes price will open and close below the 21 EMA and cause some technical analysts will say the trend is over. I added the ATR specifically to get a volatility based, upper and lower bound range around the 21 EMA. that way I have an acceptable price range where price could move past the 21 EMA and still keep a trend valid using similar rules. I then saw that so long this ATR band (not the 21 EMA itself) was touching those trending clouds, then the trend has a good chance of continuing as long as that was true.
Pine Script®指標
由joebaus提供
3
Reversal with Bollinger Bands + RSI + ADX + ATR (Upgraded)Hi, Welcome to my 4th script. Someone asked me some questions about the Bollinger Band strategy I previously published. When I went back to my published script I couldn't help myself but simply try and make it better. Which I did. Since I've published that script, I've gained much more knowledge about how Pinescript functions. As well as gaining more and more knowledge about how the markets are structered etc. In this reversal script we use 4 indicators to determine good entry signals, we determine whether the market is ranging or trending and we still only want to take trades in the direction of the "trend". Bollinger Bands are used for our entry signal. When price hits either side of the band, we wait for a reverse candlestick before we enter a position. RSI is used to determine if we're in a trending market or in a ranging market. You can adjust the values in the inputs. You can determine the minimum RSI value and the maximum RSI value. ADX is used the same way as RSI, you can adjust the value in the inputs. You can determine the minimum ADX value. Last but not least we use two EMA's, a 200 EMA and 100 EMA. Both are adjustable through the inputs. I used two EMA's because I noticed when using this strategy that we'd enter a new position often after having a bad trade. Using two EMA's might clean up some signals, in my case with EUR/USD on a 15m timeframe, it didn't clean up enough signals. All the default values are pretty decent but might require some finetuning on a certain instrument. Don't overfit the strategy though, that'll only give you bad signals in the future. Then we are off to our exit signals. Initially I wanted to incorporate my previous Bollinger Band exit signals as well, but it was too much of a hassle to make the script work as intended so I left it out. If you want to use those exit signals, just find my other script. When we're in a position and price crosses the opposite band, we wait for a reverse candlestick before we exit the position. Additionally we want our losses to be as small as possible, so we use RSI to signal us when the market is, or starts to, trend against us. This is where you use the minimum and maximum exit values. So when RSI crosses over or under that value, it'll exit the position. Furthermore, we use the ATR indicator to set our stop loss, which is pretty basic stuff. You can adjust the ATR multiplier in the inputs. Disabling "Use Trailing Stop?" is really inadvisable unless you know this script inside out as your only exit signals will be opposite Bollinger Band Cross and RSI overbought / oversold areas.
Pine Script®策略
由conflixx95493提供
2
[laoowai]BNB_USDT_3m_3Commas_Bollinger_MACD_RSI_StrategyBNB_USDT _3m Release Notes: Time: 3min Pair: BNB_USDT Use: {{strategy.order.alert_message}} What's the difference with 3Commas Bollinger Strategy by tedwardd: 1. Initial capital: 1210 USDT (10$ Base order / 400$*3 Safety order), if you will change, please change JUST safety order volume or number of safety orders 2-3 2. Using just 2(3) safety order (original script 4) 3. More high-performance strategy for BNB_USDT 4. Using MACD to sell order (original script take profit by scale), thanks Drun30 . 5. Using RSI to analyze the market conditions. Need to change: bot_id = input(title="3Commas Bot ID", defval=" YOUR DATA ") email_token = input(title="Bot Email Token", defval=" YOUR DATA ") --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- FAQ copy from tedwardd --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- This strategy is intended for use as a way of backtesting various parameters available on 3commas. The primary inputs for the strategy are: --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- // USER INPUTS Short MA Window - The length of the Short moving average Long MA Window - The length of the Long moving average Upper Band Offset - The offset to use for the upper bollinger offset Lower Band Offset - The offset to use for the lower bollinger offset Long Stop Loss % - The stop loss percentage to test Long Take Profit % - The Take profit percentage to test Initial SO Deviation % - The price deviation percentage required to place to first safety order Safety Order Vol Step % - The volume scale to test 3Commas Bot ID - (self-explanatory) Bot Email Token - Found in the deal start message for your bot (see link in the previous section for details) 3Commas Bot Trading Pair - The pair to include for composite bot start deals (should match the format of 3commas, not TradingView IE. USDT_BTC not BTCUSDT ) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Start Date, Month, Year and End Date, Month, and Year all apply to the backtesting window. By default, it will use as much data as it can give the current period select (there is less historical data available for periods below 1H) back as far as 2016 (there appears to be no historical data on Trading view much before this). If you would like to test a different period of time, just change these values accordingly. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Composite bot using a Bollinger band type trading strategy. While its primary intention is to provide users a way of backtesting bot parameters, it can also be used to trigger a deal start by either using the {{strategy.order.alert_message}} field in your alert and providing the bot details in the configuration screen for the strategy or by including the usual deal start message provided by 3commas. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Original script: 1. 3Commas Bollinger Strategy by tedwardd 2. Momentum Strategy ( BTC /USDT; 1h) - MACD (with source code) by Drun30
Pine Script®策略
由laoowai提供
32
[KL] Bollinger Bands Consolidation StrategyThis strategy will enter into long position based on the volatility of prices implied by indicators of (a) Bollinger bands, and (b) ATR. Application of Bollinger bands ("BOLL") Using plain vanilla settings for BOLL (i.e. 20 period moving average, and 2 standard deviations of closing prices), we are interested to know about the shape of the area that is bounded by the upper and lower bands. In theory, consolidation happens when volatility of price decreases. Visually speaking, this is represented by the narrowing of the upper/lower bands. This strategy considers the narrowing of BOLL bands as the primary indicator for long-entry. Application of ATRs (as confirmations) Firstly, to confirm that BOLL bands are narrowing (as mentioned above), the ATR at a potential point of entry is compared against the standard deviation of prices over BOLL's lookback periods. Once again, visualizing the shape of BOLL bands during consolidation, we assume the lines begin to squeeze when the distance between the center line and upper/lower band is less than two current ATRs. Secondly, this strategy looks into the moving average of ATRs to assure that prices are not too choppy when entering into market. If the moving average of ATR decreases at a point in time such that all the above conditions are met, then we can assert that the volatility of price is decreasing. Thirdly, ATR is used for determining the size of our trailing stop loss. We will keep the multiplier fixed at two.
Pine Script®策略
由DojiEmoji提供
4