Fibonacci + RSI - StrategyOverview
This is an intraday mean-reversion strategy designed for short timeframes (1–30 minutes).
It combines volatility-based Fibonacci bands with RSI momentum signals to identify temporary price extremes and trade pullbacks back toward fair value.
The strategy trades both long and short, uses limit entries, a manual exit logic, and a hard stop-loss as risk protection.
Market Context
The strategy assumes that, on intraday timeframes:
price frequently deviates from its short-term fair value,
extreme deviations tend to revert,
momentum (RSI) can confirm exhaustion.
It is not a trend-following system.
Trades are taken against short-term extremes, not in the direction of breakouts.
Indicators Used
1. Fibonacci Volatility Bands
The bands are calculated using:
VWMA (Volume Weighted Moving Average) as the central price,
Standard Deviation as a volatility measure,
a multiplier to create upper and lower bands.
Key levels:
Upper Band (fu1) – overextended price zone
Lower Band (fd1) – oversold price zone
Intermediate targets (fu764 / fd764) – mean-reversion profit targets
These bands behave similarly to dynamic volatility channels.
2. RSI (Relative Strength Index)
RSI length: typically 14
Oversold level: 30
Overbought level: 70
The strategy uses RSI crossovers to confirm momentum reversal:
crossing up from oversold → potential long
crossing down from overbought → potential short
Entry Rules
Long Entry
A long position is considered when:
Price trades below the lower Fibonacci band (fd1)
RSI crosses upward from the oversold level
Price is still below the predefined upside target
The trade is entered using a limit order at the candle close.
Short Entry
A short position is considered when:
Price trades above the upper Fibonacci band (fu1)
RSI crosses downward from the overbought level
Price is still above the predefined downside target
The trade is entered using a limit order at the candle close.
Exit Rules
Manual Exit (Primary Exit)
Positions are closed manually when price reaches predefined Fibonacci target levels:
Long: price moves back up into the target zone
Short: price moves back down into the target zone
This exit represents the mean-reversion objective of the strategy.
Stop-Loss (Risk Protection)
A hard stop-loss is always active to protect against adverse moves.
Long stop: below entry price
Short stop: above entry price
The stop is calculated as a fixed percentage (or ATR-based in later versions) from the entry price.
The stop-loss is not the primary exit, but a safety mechanism.
Order Management Philosophy
Limit entries are used to avoid market slippage.
Manual exits control trade logic.
Stop-loss exits control risk only.
Only one position per direction is managed at a time.
Alerts are generated at signal or entry time for automation or monitoring.
Risk & Characteristics
Designed for frequent, small trades
Low average drawdown per trade
Performance depends heavily on:
volatility regime
correct stop sizing
disciplined risk management
Without proper position sizing, the strategy must not be traded live.
Suitable Markets
Forex pairs
Indices
Liquid crypto pairs
Best performance is expected in ranging or mildly trending markets.
Summary
This strategy attempts to exploit short-term price overextensions by combining volatility bands with momentum confirmation.
It relies on mean reversion, controlled risk, and disciplined execution rather than large directional moves.
在腳本中搜尋"pullback"
Volatility Trend Score [BackQuant]Volatility Trend Score
Overview
Volatility Trend Score is a trend-strength and regime-evaluation indicator built to measure directional persistence, not just direction. Most trend tools answer “up or down” using slope, crossovers, or a single condition. This indicator answers a more useful question for real trading: “How consistently is trend structure holding up once volatility is accounted for?”
It does this by building a volatility-scaled trailing structure (ATR-based) and then scoring how that structure evolves over a configurable lookback range. The output is a continuous score that rises when trend is persistent and decays when price action becomes noisy, mean-reverting, or unstable.
What it is measuring (the real goal)
This indicator is not trying to predict reversals. It is trying to quantify whether the market is behaving like a trend market or a chop market. It focuses on:
Persistence: does structure keep pushing in one direction bar after bar?
Stability: are pullbacks being absorbed without breaking the trailing structure?
Regime: is the market trending strongly enough to justify directional bias?
If you already have entries from other systems, this becomes a high-quality trend filter and trade management layer.
Core idea
At its foundation, the indicator combines two parts:
A volatility-adjusted trailing level derived from ATR and a user-defined factor.
A rolling persistence score that compares the current trail to prior trail values over a configurable loop window.
The trailing structure adapts to volatility and enforces one-sided movement, while the scoring logic converts that behavior into a numeric measure of trend quality.
Inputs and what they actually control
Average True Range Period (calc_p)
Defines the ATR window used to estimate volatility. A higher value smooths the volatility estimate and makes the trailing structure less reactive.
Factor (atr_factor)
Scales the ATR band size. Higher values widen the trailing band, filtering more noise, reducing flip frequency, and generally producing slower but more stable regimes.
For Loop Start/End (start/end)
Defines the comparison window used to build the score. It effectively sets how many historical trail values the current trail is compared against.
Shorter ranges produce a faster, more responsive score.
Longer ranges produce a slower, more “confidence-based” score that only climbs when trend persistence is sustained.
Long/Short Thresholds (thresL/thresS)
Convert a continuous score into regime thresholds.
Long threshold is a “trend quality requirement” for bullish bias.
Short threshold is used as a deterioration / breakdown trigger via crossunder logic.
Volatility-adjusted trailing structure
The trailing line is built from ATR bands around price:
up = close + ATR * factor
dn = close - ATR * factor
Then a trailing value is maintained with one-sided ratcheting behavior:
If dn rises above the previous trail, the trail steps up (ratchets upward).
If up drops below the previous trail, the trail steps down (ratchets downward).
This “ratchet” behavior is important. It prevents the trail from oscillating with small countertrend moves, forcing the trail to represent meaningful structure rather than micro-noise. On-chart, this trail often behaves like dynamic support/resistance in trends.
Why the trail is a better base than raw price
Price itself is noisy, and volatility changes the meaning of “big move” vs “small move.” By anchoring structure to ATR:
A move is interpreted relative to current volatility, not in absolute points.
High-volatility chop is less likely to be misread as a trend.
Trend structure is normalized across assets and timeframes more reliably.
This is why the score remains usable even when switching from low-vol assets to high-vol crypto pairs.
Trend scoring logic
The score is built by repeatedly comparing the current trailing value to trailing values from prior bars across a loop window:
If current trail > trail , add +1
If current trail < trail , add -1
This is a persistence test, not a momentum calculation. In a strong trend, the trail should generally keep stepping in the trend direction, so current values will be greater than many past values (bullish) or lower than many past values (bearish). In chop, the trail fails to progress meaningfully, so the score compresses, oscillates, or bleeds out.
How to interpret the score
Think of the score as a “trend conviction meter”:
High positive values: bullish persistence, structure is advancing consistently.
Low positive values: bullish bias may exist, but trend quality is weak or unstable.
Near zero: indecision, range behavior, or frequent structure challenges.
Negative values: bearish dominance or sustained deterioration in structure.
The speed of score change matters too:
Fast expansion suggests a fresh regime gaining traction.
Slow grind suggests mature trend continuation.
Rapid compression often signals consolidation, exhaustion, or a transition phase.
Signals and regime transitions
This script uses two different styles of conditions (important detail):
Long condition: score > long threshold (state-based, persistent while true).
Short condition: crossunder(score, short threshold) (event-based trigger).
That means:
Long bias can remain active as long as score stays above the long threshold.
Short regime flips are triggered at the moment the score breaks down through the short threshold.
On the chart, long/short shapes are only plotted when the regime flips (first bar of the change), not on every bar, using:
Long shape when signal becomes 1 and previous signal was -1
Short shape when signal becomes -1 and previous signal was 1
This keeps signals clean and avoids spam, making it usable for alerts and regime tagging.
Visual presentation
The indicator is designed to work both as a panel oscillator and as an on-chart overlay:
Score plot (oscillator): color reflects active regime state.
Optional trail on price: volatility-scaled structure line on chart.
Optional threshold reference lines: clear regime boundaries.
Optional candle coloring: makes regime obvious without reading the panel.
Optional background shading: useful for quick scanning and backtesting visually.
You can use only the score, only the trail, or both together depending on your workflow.
Practical use cases
1) Trend filter for systems
Use the score as a regime gate:
Allow long entries only when score is above the long threshold.
Avoid longs when score compresses toward zero or loses the threshold.
Treat the short threshold break as “trend is no longer healthy.”
This often improves system expectancy by reducing exposure during low-conviction conditions.
2) Trend quality grading
Instead of treating all uptrends as equal:
Higher score = higher persistence, better continuation odds.
Score plateau = trend losing pressure, continuation becomes less reliable.
Score decay while price rises = trend is getting weaker under the hood.
This is useful for position sizing or deciding whether to add to winners.
3) Trade management and exits
Two complementary tools exist here:
Trail line can act as a dynamic stop reference or structure invalidation level.
Score behavior can be used to scale out when persistence fades (before a full flip).
Many traders use the trail for “hard structure” and the score for “soft deterioration.”
4) Breakout confirmation vs fakeouts
A breakout that immediately fails to build score is often low quality.
Healthy breakouts usually come with score expansion as structure advances.
Fakeouts often revert quickly, score fails to climb, and regime stays unstable.
Tuning guidelines
These are general behaviors you can expect when adjusting settings:
Higher ATR period and factor: slower regimes, fewer flips, cleaner structure.
Lower ATR period and factor: faster reaction, more sensitivity, more noise risk.
Longer loop range: score becomes more “confidence-based,” slower to change.
Shorter loop range: score becomes more “tactical,” faster but more jittery.
A good way to tune is to pick the trail behavior first (ATR period and factor), then tune the score window (loop) to match how quickly you want “trend conviction” to build.
Market behavior focus
Volatility Trend Score is most valuable in markets where volatility shifts frequently and fake trends are common, especially crypto. It is designed to:
Stay out of low-quality chop where most indicators whipsaw.
Quantify when volatility is being expressed directionally (constructive trend).
Provide a clean regime framework for filtering, alignment, and management.
Summary
Volatility Trend Score converts volatility-adjusted structure into a quantified measure of trend persistence. By combining an ATR-based trailing mechanism with a rolling comparison score, it provides a more reliable read on trend quality than single-condition indicators. It is best used as a regime filter, a trend strength gauge, and a trade management layer, helping you stay aligned with strong directional phases while avoiding low-conviction envir
Long Only - Double EMA + SessionOverview
This is a high-probability Long-Only trend-following strategy designed primarily for the 65-minute and 4-hour timeframes. It utilizes a dual-layered filter system to align trades with both macro and mid-term market momentum, ensuring entries only occur during healthy uptrends. The strategy is optimized for volatile, high-growth assets like TSLA and MSFT.
How It Works
The strategy relies on three primary pillars of technical analysis to confirm an "A+" setup:
Macro Trend Filter (200 EMA): We only look for long opportunities when the price is above the 200-period Exponential Moving Average. This keeps the strategy on the right side of the long-term trend and avoids "buying the dip" during major bear markets.
Momentum Filter (50 EMA): The 50 EMA acts as a local trend filter. By requiring price to be above both EMAs, we ensure the medium-term momentum is also bullish.
The Trigger (Stochastic RSI): We enter when the Stochastic RSI K-line crosses above the 20 level (Oversold). This identifies local "oversold" pullbacks within a larger uptrend.
Risk Management & Exit Plan
This strategy is built with professional-grade capital preservation in mind:
Trailing Stop-Loss: A 5% trailing stop follows the price as it moves in our favor. This protects unrealized profits and helps mitigate the drawdown during sudden reversals.
Dynamic Profit Target: The strategy exits automatically if the Stochastic RSI K-line reaches the 97 level, capturing gains at the peak of momentum.
Session Filter: To avoid the "noise" of pre-market and low-volume afternoon trading, the strategy is restricted to the Market Open (9:30 AM EST) window where institutional volume is highest.
Backtesting Notes
Realistic Simulation: This strategy includes a 0.05% commission and 2 ticks of slippage to reflect real-world execution costs.
Recommended Assets: Optimized for Nasdaq-100 components and high-volume growth stocks.
Timeframe: Best performance found on 65m or 4h intervals.
Dynamic ATR-based Renko Overlay - Non repaintingDaily ATR-Based Renko Overlay
Overview
This Pine Script v5 indicator creates a dynamic Renko overlay on your time-based charts (optimized for 1-minute timeframes), using the previous period's ATR from a user-specified higher timeframe (default: 1-hour) to determine brick sizes. Unlike traditional Renko charts, this is an overlay that draws Renko bricks directly on top of your existing candles, allowing you to combine the noise-filtering power of Renko with the full features of time-based charts.
It's designed for traders who want Renko's trend-clarity benefits without switching chart types, especially useful for intraday trading in volatile markets like forex, stocks, or crypto.
Key Features
- Adaptive Brick Sizing: Brick size is calculated as a percentage (default 40%) of the previous period's ATR (Average True Range, default length 14) from the selected higher timeframe (default: 1-hour). This makes bricks volatility-adjusted—larger in high-vol periods to reduce noise, smaller in low-vol for more detail.
- Periodic Recalculation: Resets brick size at the start of each new period based on the user-specified reset timeframe (default: daily), using the prior period's ATR from the chosen timeframe. This ensures relevance without unwanted disruptions.
- Traditional Renko Logic: Uses 1-box reversal (a full brick against the trend to reverse). Bricks form based on closing prices, ignoring time and minor fluctuations.
- Visual Style: Stepped lines with green (up) and red (down) fills for a box-like appearance. Semi-transparent for easy overlay on candles.
- Customizable Inputs:
- ATR Length: Adjust the ATR period (default: 14).
- Percentage of ATR: Fine-tune brick sensitivity (default: 0.4 or 40%; range 0-1).
- ATR Timeframe: Specify the timeframe for ATR calculation (default: "60" for 1-hour; enter as a string like "240" for 4-hour, "D" for daily, etc.).
- Reset Timeframe: Specify the period for recalculating the brick size (default: "D" for daily; enter as a string like "W" for weekly, "M" for monthly, etc.).
How It Works
1. Fetches ATR from the user-specified timeframe via `request.security` for higher-timeframe volatility data.
2. On new periods based on the reset timeframe (or first load), sets brick size to `percent * ATR_HTF`.
3. Tracks Renko "close" and "previous close" to calculate bricks:
- Upward moves add green bricks in multiples of the size.
- Downward moves add red bricks.
- Reversals require a full brick against the direction.
4. Plots and fills create the overlay, updating on each 1-min bar close.
Add it to a 1-minute chart for best results—bricks will adapt periodically while you retain full candle visibility.
Why This Indicator is Helpful
TradingView's native Renko charts are powerful but come with limitations that can frustrate serious traders:
- No Bar Replay: Native Renko doesn't support TradingView's bar replay feature, making it hard to simulate historical trading sessions.
- Inaccurate/Repainting Strategy Testing: Strategies on native Renko can repaint or lack precision due to the non-time-based nature, leading to unreliable backtests.
- Limited Data History: Fast Renko timeframes (e.g., small bricks) often load very little historical data, restricting long-term analysis.
This overlay solves these by building Renko on a time-based chart:
- Full Bar Replay Support: Replay sessions as usual on your 1-min chart—the Renko follows along.
- Accurate, Non-Repainting Testing: Test strategies on the underlying time chart without repainting issues, as Renko is derived from closes.
- Unlimited Data Depth: Access TradingView's full historical data for 1-min charts (up to years of bars), not limited by Renko's data constraints.
- Hybrid Analysis: Overlay Renko on candles to spot trends while using volume, indicators (e.g., RSI, MAs), or drawing tools that don't work well on native Renko.
It's a game-changer for trend-following, breakout strategies, or filtering noise in short-term trades. No more switching charts—get the best of both worlds!
Usage Tips
- Best on 1-min charts for intraday precision, but experiment with others.
- Tune the percentage lower (e.g., 0.3) for more bricks/sensitivity, higher (e.g., 0.5) for fewer/false-signal reduction.
- Adjust the ATR timeframe to match your strategy—e.g., "240" for longer-term volatility or "15" for shorter.
- Customize the reset timeframe for different recalculation frequencies—e.g., "W" for weekly resets to capture broader market shifts, or "240" for every 4 hours.
- Combine with alerts: right now I am experimenting with 90 period EMA and the Renko brick pullbacks to find some EDGE
If you find this useful, give it a thumbs up or share your tweaks in the comments. Feedback welcome—happy trading! 🚀
[CT] Highest/Lowest Close Midline Candle ColorThis indicator looks back a user defined number of bars, the default is 14, and finds the highest closing price and the lowest closing price in that lookback window. Those two values form a rolling closing range. The script then calculates a midpoint of that range by averaging the highest close and the lowest close. That midpoint is plotted as “o”, and it acts like a simple, adaptive balance line for where the market is trading within its recent closing range.
On every bar, the candle color is driven by where the current close finishes relative to that midpoint. When price closes above the midpoint, the script colors the candle green, which tells you that the close is occurring in the upper half of the most recent closing range. When price closes below the midpoint, the candle is colored red, which tells you the close is occurring in the lower half of the most recent closing range. If the close lands exactly on the midpoint, the script leaves the bar uncolored, which is a quick way to spot “neutral” closes that are sitting right at the balance point.
On the chart you will see three plots. The “hi” line is the highest close over the lookback period, so it behaves like a dynamic ceiling for closes. The “lo” line is the lowest close over the lookback period, so it behaves like a dynamic floor for closes. The “o” line is the midpoint between those two, and it will move up when the rolling highest and lowest closes lift, and it will move down when they fall. Because all three are based on closing prices instead of highs and lows, they reflect where the market is actually accepting value at the end of each bar rather than momentary wicks.
In practical use, the midpoint line is your decision line and the candle colors are your bias filter. A sequence of green candles means closes are consistently happening above the midpoint, which implies bullish control of the recent closing range and can be used as a confirmation to favor long setups, trend continuation trades, or pullbacks that hold above the midpoint. A sequence of red candles means closes are consistently happening below the midpoint, which implies bearish control of the recent closing range and can be used to favor short setups or bearish continuation until price can reclaim the midpoint. When candles flip color around the midpoint repeatedly, that is a visual cue that the market is rotating and the midpoint is acting like a balance area rather than support or resistance, which often aligns with consolidation or choppier conditions.
The “hi” and “lo” lines can be treated as context levels. If price is closing above the midpoint and pressing toward the “hi” line, you are seeing strength within the closing range and the prior highest close becomes the next level where continuation may stall or break. If price is closing below the midpoint and pressing toward the “lo” line, you are seeing weakness within the closing range and the prior lowest close becomes the next level where continuation may pause or accelerate through. Breaks beyond the “hi” or “lo” line indicate that the rolling closing range is expanding, which can coincide with trend continuation or a breakout from a prior range.
This tool is simple by design and is best used as a directional filter and a structure guide rather than a standalone entry system. It does not repaint past bars because it only uses completed historical closes within the selected lookback window, and it updates normally as each new bar closes. You can increase the period to smooth it for higher time frames or more stable trends, and decrease it to make it more sensitive for faster markets or scalping, with the tradeoff that shorter periods will flip colors more often in chop.
Structural Trend Integrity Score (STIS)The Structural Trend Integrity Score (STIS) is a market regime and trend-quality indicator designed to evaluate the health and durability of a price trend, rather than its direction or momentum. Instead of focusing on overbought or oversold conditions, STIS measures whether a trend is structurally supported by consistent organization, persistence above trend, controlled pullbacks, and smooth progression.
STIS outputs a normalized score from 0 to 100, where higher values indicate stronger and more reliable trend structure, and lower values signal increasing fragility or structural breakdown. This makes it especially well suited for index funds and highly liquid markets, where trends tend to persist or fail based on internal structure rather than short-term price acceleration.
The indicator is intended to be used as a risk and confidence framework, not as a direct buy or sell signal. STIS helps traders and investors determine when it is efficient to maintain or increase exposure and when caution is warranted. It works best when paired with separate timing or entry tools and is particularly effective for long-only or trend-following strategies.
VWAP Bias (STRONG ONLY) + Alerts (Time Window)VWAP Bias + NO TRADE Discipline Label
Clean, execution-focused indicator that removes decision noise.
Shows LONG / SHORT bias based on price vs VWAP, upgraded to STRONG or WEAK using VWAP slope and EMA(9/20) alignment.
A separate NO TRADE label appears when conditions are weak or neutral, enforcing discipline and preventing low-quality entries.
Designed for day trading VWAP pullbacks and momentum, especially on 1m–5m charts.
No oscillators, no clutter — just directional clarity and risk control.
Volume Cluster Profile [VCP] (Zeiierman)█ Overview
Volume Cluster Profile (Zeiierman) is a volume profile tool that builds cluster-enhanced volume-by-price maps for both the current market window and prior swing segments.
Instead of treating the profile as a raw histogram only, VCP detects the dominant volume peaks (clusters) inside the profile, then uses a Gaussian spread model to “radiate” those peaks into surrounding price bins. This produces a smoother, more context-aware profile that highlights where volume is most meaningfully concentrated, not just where it happened to print.
On top of the live profile, VCP automatically records historical swing profiles between pivots, wraps each segment for clarity, and can project the most recent segment’s High/Low Value extensions (VA/LV) forward to the current bar to keep key structure visible as price evolves.
█ How It Works
⚪ 1) Profile Construction (Volume-by-Price)
VCP builds a volume profile histogram over a chosen window (current lookback, or a swing segment):
Range Scan
The script finds the full min → max price range inside the window.
Bin the Range
That range is divided into a user-defined number of Price Bins (rows). More bins = finer detail, but heavier computation.
Accumulate Volume into Bins
For each bar inside the window, the script takes the bar’s close price, determines which price bin it belongs to, and adds the bar’s volume to that bin.
float step = (maxPrice - minPrice) / binsCount
for i = 0 to barsToUse - 1
int b = f_clamp(int(math.floor((close - minPrice) / step)), 0, binsCount - 1)
volBins += volume
Result: volBins becomes a standard volume-by-price histogram (close-based binning).
⚪ 2) Cluster Detection (Finding Dominant Peaks)
Once the raw histogram is built, VCP identifies cluster centers as the most meaningful volume “hills”:
Local Peak Test
A bin becomes a cluster candidate if its volume is greater than or equal to its immediate neighbors (left/right).
Filter Weak Peaks
Peaks must also be above a basic activity threshold (relative to the average bin volume) to avoid noise.
bool isPeak = v >= left and v >= right
if isPeak and v > avgVol
array.push(clusterIdxs, b)
Keep the Best Peaks Only
If too many peaks exist, the script keeps only the strongest ones, capped by: Max Cluster Centers
Result: clusterIdxs = the set of dominant profile peaks (cluster centers).
⚪ 3) Cluster Enhancement (Gaussian Spread Model)
This is what makes VCP different from a raw profile.
Instead of using volBins directly, the script builds an enhanced profile where each cluster center influences nearby price bins using a Gaussian curve:
Distance from each bin to each cluster center is computed in “bin units”
A Gaussian weight is applied so that bins near the center receive stronger influence, while bins farther away decay smoothly.
Cluster Spread (sigma) controls how wide this influence reaches: low sigma produces tight, sharp clusters, while high sigma results in wider, smoother structure zones.
enhanced += centerV * math.exp(-(dist*dist) / (2.0 * clusterSigma * clusterSigma))
volBinsAI := enhanced / szClFinal
Result: volBinsAI = the cluster-enhanced volume value for each bin.
In practice, VCP turns the profile into a structure map of dominant volume concentrations, rather than a simple “where volume printed” histogram.
⚪ 4) POC from the Enhanced Profile
After enhancement:
The bin with the highest volBinsAI becomes the POC (Point of Control)
POC is plotted at the midpoint price of that bin
if volBinsAI > maxVol
maxVol := volBinsAI , pocBin := b
So the POC reflects the cluster-enhanced profile rather than the raw histogram.
█ How to Use
⚪ Read Cluster Structure (Default = 2 Clusters)
By default, the Volume Cluster Profile (VCP) is configured to detect up to 2 dominant volume clusters within the profile. These clusters represent price zones where the market accepted trading activity, not just where volume printed randomly.
⚪ When TWO Clusters Appear
When VCP detects two distinct clusters, it usually indicates:
Two competing areas of value
Ongoing auction between higher and lower acceptance zones
Treat each cluster as an acceptance zone
Expect slower price action and rotation inside clusters
Expect faster movement in the low-volume space between clusters
Use cluster-to-cluster movement as:
rotation targets
range boundaries
acceptance vs rejection tests
Typical behavior:
Price enters a cluster → stalls, consolidates, rotates
Price rejects at cluster edge → moves toward the opposite cluster
⚪ When ONLY ONE Cluster Appears
If VCP detects only one cluster, or if two clusters visually merge into one:
Volume is no longer split
The market has formed a single dominant value area
Price consensus is strong
Treat the cluster as the primary value anchor
Expect pullbacks and reactions around this zone
Bias becomes directional:
Above the cluster → bullish context
Below the cluster → bearish context
Inside the cluster → balance/chop
This structure often appears during clean trends or stable equilibria.
⚪ VA/LV Extensions
VCP projects two zones from the end of the most recent swing segment:
VA extension = the segment’s highest enhanced-volume bin (dominant zone)
LV extension = the segment’s lowest enhanced-volume bin (thin/weak zone)
A breakout of the VA extension signals acceptance and potential continuation. A retest of the VA or LV extension is used to confirm acceptance or rejection, while rejection from either zone often leads to rotation back toward value.
█ Settings
Cluster Volume Profile
Lookback Bars – how many recent bars build the current profile
Price Bins – profile resolution (more bins = more detail, heavier CPU)
Cluster Spread – Gaussian sigma; higher values widen/smooth cluster influence
Max Cluster Centers – cap on detected peaks used in enhancement
Historical Swing Cluster Volume Profile
Pivot Length – swing sensitivity (larger = fewer, broader segments)
Max Profiles – how many historical segments to retain
Profile Width – thickness of each historical profile
High & Low Value Area
Profile VA/LV – extend the last segment’s top-bin and low-bin zones forward
-----------------
Disclaimer
The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Direction Bias [ Scalping-Algo ]======================================================================
// 📊 Direction Bias
// ======================================================================
//
// 🎯 What this indicator does:
// This indicator colors your candles based on the current market bias.
// 🟢 Green bars = bullish momentum
// 🔴 Red bars = bearish momentum
// ⚪ Gray bars = choppy or undecided market
//
// ⚙️ How it works:
// It uses a range filter that adapts to volatility. When price pushes
// above the filter and keeps moving up, you get green bars. When price
// drops below and continues down, you get red bars. The filter smooths
// out the noise so you don't get whipsawed on every little move.
//
// 📈 How to trade with it:
//
// 1️⃣ Follow the color
// 🟢 Green bars = look for longs only
// 🔴 Red bars = look for shorts only
// ⚪ Gray bars = stay out or reduce size
//
// 2️⃣ Entry timing
// ✅ Wait for color change from gray to green/red
// ✅ Enter on pullbacks while color stays the same
// ❌ Don't chase if you're late to the move
//
// 3️⃣ Exit signals
// 💡 When bars turn gray, tighten your stop or take profits
// 🔄 Color flip to opposite = close the trade
//
// 4️⃣ Best practices
// ⏱️ Works best on 1m to 15m charts for scalping
// 📍 Use with support/resistance levels for better entries
// 🚫 Don't trade against the color, even if you "feel" a reversal
// 📊 Combine with volume for confirmation
//
// 🔧 Settings:
// • Period: Higher = smoother but slower reaction (default 10)
// • Multiplier: Higher = less sensitive to small moves (default 4.0)
// • Adjust based on the asset you're trading
//
// 🔔 Alerts:
// Set alerts for "Bull" and "Bear" to get notified when bias changes.
[CT] Trend Pulse Oscillator Trend Pulse Oscillator is a clean, responsive trend and momentum oscillator that measures directional pressure by comparing a fast EMA to a slow EMA, then normalizing that spread by ATR so the reading stays consistent across different symbols and volatility regimes. Instead of relying on percentile bands or fixed overbought, oversold logic from legacy oscillators, this indicator converts the EMA spread into a smooth 0–100 signal that behaves like a “trend intensity meter,” where 50 acts as the neutral midpoint, values above 50 reflect bullish dominance, and values below 50 reflect bearish dominance. Because the core input is the distance between two EMAs, it naturally tracks trend alignment, and because it is volatility-normalized, it avoids becoming overly sensitive during high volatility or too sluggish during quiet conditions.
The engine begins by calculating a fast EMA and a slow EMA on your selected source, then computing the spread between them. That spread alone can be misleading across markets because the same raw distance means different things in low volatility versus high volatility environments, so the script divides the spread by ATR to create a normalized value that represents how meaningful the trend separation is relative to typical movement. Once the spread is normalized, the indicator applies a bounded mapping using an arctangent transform, which is a stable way to compress extreme values while preserving sensitivity near the midpoint. This produces a smooth oscillator that stays in a predictable 0–100 range without hard clamping, and it keeps the transitions realistic even when price accelerates strongly. The Speed setting is the main sensitivity control, where higher values make the oscillator respond faster and flip states more quickly, and lower values slow the response, reduce noise, and produce fewer regime changes.
A signal line is then applied to the oscillator using an EMA, creating a two-line framework that is easy to trade. The oscillator line represents the current trend pressure state, while the signal line represents the smoothed baseline of that pressure. The primary decision point is the relationship between the oscillator and the signal, where oscillator above signal indicates improving bullish pressure and oscillator below signal indicates improving bearish pressure. This relationship is also used to drive the visual state of the indicator so the chart feedback matches the current bias. The indicator additionally computes a Pulse histogram as the difference between the oscillator and the signal line, which helps you quickly see when momentum is expanding or contracting. When the histogram grows in the bullish direction, pressure is strengthening above the baseline, and when it contracts toward zero, pressure is fading and conditions are becoming more balanced.
The visual layer is built to make bias and transitions obvious without clutter. You can enable a fill between the oscillator and the signal line that changes color based on whether the oscillator is above or below the signal, so the “state” is visible even at a glance. The Pulse histogram can be shown to highlight the size of the separation between the oscillator and the signal, which is useful for spotting early momentum shifts, confirming continuation, or identifying when a move is losing energy. The indicator includes standard level guides with a midpoint at 50 and optional overbought and oversold thresholds, which can help you contextualize stronger pushes away from neutral. These levels are best treated as context rather than automatic reversal triggers, because this tool is designed to track trend pressure first, and it can remain elevated or depressed for extended periods during strong directional moves.
For traders who like a unified view, there is an optional setting to color price bars based on the oscillator state relative to the signal line. When enabled, candles will reflect bullish bias when the oscillator is above the signal and bearish bias when below, aligning your chart’s candle colors with the same logic driving the oscillator’s state. This makes it easy to stay consistent with your bias filter without constantly checking the panel. The indicator also includes alert conditions focused on the core events traders care about, including oscillator crosses of the signal line, crosses of the 50 midpoint, and crosses of the overbought and oversold levels, so you can automate notifications for regime shifts, momentum changes, and stronger pressure conditions.
In practical use, Trend Pulse Oscillator is most effective as a bias and timing tool. When the oscillator holds above 50 and repeatedly stays above its signal line, it reflects persistent bullish pressure where pullbacks are more likely to be continuation opportunities. When the oscillator holds below 50 and stays below its signal line, it reflects persistent bearish pressure where rallies are more likely to be corrective. The most valuable information often comes from how cleanly the oscillator can stay on the correct side of its signal and whether the Pulse histogram expands during breaks and contractions, because that combination helps separate real trend continuation from choppy rotation.
RSI Bollinger Band and Trend Confidence Gauge█ RSI BB Trend Confidence Gauge (ADX/DMI)
Cross-checks Trend + Momentum + Strength in real time so you focus on VERIFIED conditions.
Most of us have been there: you see a move starting, you jump in, and the market immediately turns into a sideways chop-fest that eats your stop. This is a simple dashboard that forces the market to “prove itself” before you put capital at risk.
█ WHAT MAKES THIS DIFFERENT?
Most indicators are “Yes/No” machines — they fire signals anytime two lines cross, even when the market is weak, noisy, or range-bound. This script is a Quality Filter .
Instead of asking “Is price moving?”, it asks: “Is the move backed by alignment, momentum, and strength?”
VERIFIED only appears when all three agree, helping you avoid low-probability chop and “no-trade” consolidation zones.
█ QUICK START
• UP + VERIFIED + High ➔ “A-Tier” state; favor pullbacks or continuation.
• DOWN + VERIFIED + High ➔ bearish control is real; avoid dip-buying.
• Conflict (gray) ➔ indicators disagree; step aside and wait for alignment.
• R or B markers ➔ overextension warnings; don’t chase into extremes.
█ THE "ANTI-CHOP" ENGINE
Trading is probability, not guessing. This script uses a 3-stage logic gate to verify conditions:
• 1) The Trend (HMA 13/34): Hull Moving Averages provide a fast, smooth regime filter. If fast vs. slow isn’t clean, the regime isn’t ready.
• 2) The Fuel (RSI 50): A trend without momentum is a trap. UP/DOWN only prints when RSI confirms.
• 3) The Proof (ADX/DMI): Final gate. VERIFIED only appears when ADX ≥ 22 and DI+/DI- agrees . If strength isn’t there, stay sidelined.
█ VISUALS YOU'LL ACTUALLY USE
• Live Dashboard: Bottom-center snapshot of RSI, Direction (UP/DOWN/Conflict), VERIFIED status, and Confidence tier (Low/Med/High).
• Exhaustion Markers: Orange icons when price is extended: "R" for RSI extremes and "B" for Bollinger Band hits. These flag caution zones.
• Trend Ribbon: Zero-line bias bar: Lime (bullish), Red (bearish), Gray (conflict/chop risk).
█ SETTINGS
• Action ADX Minimum (default 22): Want stricter verification? Try 25. Want earlier signals? Try 20 (higher noise/risk).
Disclaimer: Educational tool only. Not financial advice. Past performance does not guarantee future results. Always use strict risk management.
0DTE SPY/QQQ Precision Scalper [3m Enhanced V2 - FIXED LINES]0DTE SPY/QQQ scalper built for the **3-minute chart** with **15m trend bias** and **1m confirmation**.
Targets **1 strike OTM** entries using VWAP/EMA pullbacks, OR breakout, MACD momentum, and RVOL filters.
Uses ATR-based **stop/target**, optional **breakeven + trailing stop**, and **time stop ~30 min** for 0DTE.
Includes strict risk controls: trade limits, cooldown, skip chop windows, and consecutive-loss lockout.
Nexus Momentum Flow [JOAT]
Nexus Momentum Flow - ADX-Based Trend Strength Analysis
Introduction and Purpose
Nexus Momentum Flow is an open-source oscillator indicator that combines the ADX (Average Directional Index) with directional movement indicators (+DI/-DI) to create a comprehensive trend strength and direction analysis tool. The core problem this indicator solves is that ADX alone tells you trend strength but not direction, while +DI/-DI alone tells you direction but not strength. Traders need both pieces of information together.
This indicator addresses that by combining ADX strength classification with directional bias into a single confluence score, making it easy to identify when strong trends exist and which direction they favor.
Why These Components Work Together
1. ADX (Average Directional Index) - Measures trend strength regardless of direction. Values above 25 indicate trending; below 20 indicate ranging.
2. +DI (Positive Directional Indicator) - Measures upward price movement strength.
3. -DI (Negative Directional Indicator) - Measures downward price movement strength.
4. Confluence Score - Combines ADX strength with DI bias to create a single actionable metric.
The combination works because:
ADX filters out ranging markets where DI crossovers produce whipsaws
DI relationship provides direction when ADX confirms trend
Confluence score simplifies the analysis into one number
How the Calculation Works
float directionBias = diPlus - diMinus
float confluenceScore = (adx / 100) * directionBias
The confluence score is positive when +DI > -DI (bullish) and negative when -DI > +DI (bearish), with magnitude scaled by ADX strength.
Trend State Classification
EXTREME - ADX > 50 (very strong trend)
STRONG - ADX 35-50 (strong trend)
TRENDING - ADX 25-35 (moderate trend)
RANGING - ADX < 25 (no clear trend)
Dashboard Information
Status - Current trend state (EXTREME/STRONG/TRENDING/RANGING)
Direction - BULLISH or BEARISH based on DI relationship
ADX - Current ADX value
DI Bias - Difference between +DI and -DI
Confluence - Combined score with directional context
How to Use This Indicator
For Trend Following:
1. Wait for ADX to show TRENDING or higher
2. Check direction matches your trade bias
3. Enter on pullbacks when confluence remains positive/negative
4. Exit when ADX drops to RANGING
For Avoiding Whipsaws:
1. Do not trade DI crossovers when ADX shows RANGING
2. Only trust directional signals when ADX confirms trend
3. Use RANGING periods for mean-reversion strategies instead
For Trend Exhaustion:
1. Watch for EXTREME ADX readings
2. Extreme trends often precede reversals
3. Consider taking profits when ADX reaches extreme levels
Input Parameters
ADX Length (14) - Period for ADX calculation
DI Length (14) - Period for directional indicators
ADX Smoothing (14) - Smoothing period for ADX
Trend Threshold (25) - ADX level for trend confirmation
Strong Threshold (35) - ADX level for strong trend
Extreme Threshold (50) - ADX level for extreme trend
Timeframe Recommendations
Daily/4H: Best for swing trading trend analysis
1H: Good for intraday trend following
15m: More signals but requires faster reaction
Limitations
ADX is a lagging indicator - trends are confirmed after they start
DI crossovers can whipsaw even with ADX filter
Works best in markets that trend clearly
May miss early trend entries due to confirmation requirement
Open-Source and Disclaimer
This script is published as open-source under the Mozilla Public License 2.0 for educational purposes.
This indicator does not constitute financial advice. Trend analysis does not guarantee profitable trades. Always use proper risk management.
- Made with passion by officialjackofalltrades
PAE - Price Action Essential**PAE - Price Action Essential** indicator.
This system is engineered to provide high-fidelity market structure readings, blending moving average harmony with algorithmic volume analysis at critical turning points.
---
## 1. Indicator Philosophy
**PAE** operates under the **"Signal over Noise"** principle. Its goal is to declutter the chart of visual distractions, highlighting only the areas where true confluence exists between price action and institutional effort (volume).
---
## 2. Moving Average Dynamics & Action Zone
The system utilizes a hierarchy of four moving averages to segment market flow:
### A. The Action Zone (Short-Term)
This is generated via a dynamic shading between the **Fast MA (9)** and the **Base MA (20)**.
* **Configuration:** Allows the user to select the calculation type (EMA, SMA, WMA, HMA) for both averages simultaneously.
* **Fast MA Colors:**
* `#a5d6a7` (Soft Green) during ascending values.
* `#faa1a4` (Soft Red) during descending values.
* **Purpose:** The shaded area acts as a "value band." Pullbacks into this zone during defined trends often offer the highest probability entry opportunities.
### B. Structural MAs (Mid & Long-Term)
These averages are fixed to **SMA** type to maintain stability in trend analysis:
* **Medium SMA (40):** Uses vibrant colors (**#3179f5** Blue / **#ffee58** Yellow) to clearly mark the primary direction of the current swing.
* **Slow SMA (200):** Uses pastel tones (**#90bff9** / **#fff9c4**) and a dotted style to define the long-term institutional bias.
---
## 3. Pivot Analysis with Smart Volume
**PAE** identifies fractals (Highs and Lows) and automatically classifies them based on their **Relative Volume** compared to the previous 20 candles.
### Visual Classification by Color
To ensure rapid interpretation, labels are set to **Tiny** size, with color serving as the primary data indicator:
| Pivot Type | Color | Volume Condition | Interpretation |
| --- | --- | --- | --- |
| **Strength (MAX)** | `#ff001e` (Bright Red) | `> 160%` of Avg | High-conviction resistance. |
| **Strength (MIN)** | `#0fa600` (Bright Green) | `> 160%` of Avg | High-conviction support. |
| **Base (MAX)** | `#f1adad` (Soft Rose) | Between `30%` - `160%` | Standard market structure. |
| **Base (MIN)** | `#bee7c0` (Soft Mint) | Between `30%` - `160%` | Standard market structure. |
| **Noise** | `#ffffff` (White 67% Transp.) | `< 30%` of Avg | Weak pivots or lack of interest. |
---
## 4. Contextual Information (Tooltips)
Every Pivot label is interactive. By hovering the cursor over the triangles, the trader obtains precise data:
* **Price:** Indicates the exact **Closing** value of the candle that triggered the pivot (MAX or Min).
* **Vol:** Displays the exact percentage of relative volume. For example, a value of **200%** confirms that the candle had double the average volume, validating the strength of that support or resistance level.
---
## 5. Recommended Configuration Parameters
* **Left/Right Bars (3):** The ideal balance between early detection and swing confirmation.
* **Strength Factor (1.60):** Filters for movements backed by professional intent.
* **Noise Factor (0.30):** Identifies exhaustion or lack of participation.
---
### Operational Summary
The **PAE** helps traders stop guessing. If the price reaches the **Action Zone** (shading) and coincides with a **Strength Pivot** (bright color), the probability of a reaction in favor of the trend is significantly high. It is a precision tool designed for traders seeking absolute clarity in their decision-making process.
Tetris V1 traderglobaltopTetris Indicator is a visual trading tool that displays blocks or zones on the chart to identify market structures, such as impulses, pullbacks, and key price areas. Its purpose is to simplify market analysis, helping traders clearly identify entries, exits, and potential trend continuations.
Trading involves risk. All risk is assumed solely by the operator; the indicator developer is not responsible for any trading losses..
Indicador Tetris es una herramienta de trading visual que muestra bloques o zonas en el gráfico para identificar estructuras del mercado, como impulsos, retrocesos y áreas clave de precio. Su objetivo es simplificar la lectura del mercado, ayudando a detectar entradas, salidas y posibles continuaciones de tendencia de forma clara, con una ema de 120.
Momentum Clarity Engine📘 Description - Momentum Clarity Engine
Momentum Clarity Engine (MC-Engine) is a visual momentum-context indicator designed to help traders clearly identify trend direction, momentum strength, and low-quality market conditions using a disciplined combination of MACD and RSI.
Rather than generating buy or sell signals, MC-Engine focuses on clarity and risk control by visually classifying price action into intuitive momentum states and highlighting periods where trading conditions are unfavorable.
🔍 How it works
The indicator combines:
MACD Histogram → momentum direction and strength
RSI → bullish vs bearish pressure balance
Based on this confluence, price candles are colored to reflect market state:
Strong Bullish Momentum → Dark Green (solid)
Weak Bullish Momentum → Light Green (transparent)
Strong Bearish Momentum → Dark Red (solid)
Weak Bearish Momentum → Light Red (transparent)
No-Trade Zone → Muted Orange (high transparency)
Candle opacity dynamically adapts to MACD histogram strength, allowing traders to visually sense when momentum is expanding, weakening, or lacking conviction.
🟠 No-Trade Zone (Key Feature)
The No-Trade zone highlights periods of:
Low momentum
RSI balance / indecision
Choppy or transitional price action
These conditions often result in poor risk-reward.
The muted orange color is intentionally designed to encourage patience and discipline.
✅ How to use MC-Engine
MC-Engine is best used as a trade filter and context tool, not as a standalone strategy.
Common use cases:
Confirming trend strength before entries
Avoiding trades during low-momentum chop
Filtering breakouts and pullbacks
Intraday trading on 1-minute to 15-minute charts
Futures, indices, equities, and crypto markets
Recommended to pair with:
Market structure
Trendlines
VWAP
Support & resistance
Higher-timeframe context
⚠️ Important Notes
This indicator does not provide buy or sell signals
No repainting or future-looking logic
Designed for educational and analytical purposes only
Always apply proper risk management
🧠 Philosophy
The goal is not to trade more —
the goal is to trade when conditions are clear.
Momentum Clarity Engine helps traders participate during strong momentum and stand aside during uncertainty.
BTC - CII: Drawdown DNA | RMBTC - CII: Drawdown DNA | Rob_Maths
The "Broken Cycle" Series: Pt 1
Welcome to the debut of the Cycle Integrity Index (CII) . This quantitative diagnostic suite was engineered for a singular mission: to determine if Bitcoin’s historical 4-year cycle is still the primary track rhythm, or if the market has shifted into a high-downforce Institutional Regime.
As of January 2026 , the Bitcoin market is at a historical crossroads. According to the classical 4-year model, we have passed the "Theoretical Peak" and are now on the long descent toward a projected cycle low in late 2026 . However, a massive debate is raging: Is the cycle broken?
While legacy models expect a total engine failure (an -80% wipeout) by the end of this year, the ETF-era market structure suggests we may have "re-engineered" the asset's DNA. Pt 1: Drawdown DNA acts as our first telemetry check, auditing the "Structural Fatigue" of every correction to see if we are taking a tactical pit stop or heading for a catastrophic crash.
How to Read the Telemetry
Think of the Bitcoin market as a Formula 1 engine. This indicator audits the "Wear and Tear" (drawdowns) to see if the chassis can sustain its pace or if the structural integrity is failing as we approach the legacy "finish line."
• Vibrant Green (Institutional Sync): Optimal Performance. The engine is healthy. Pullbacks are shallow (-20% to -35% range), representing professional re-fueling stops by smart money. This suggests the "Supercycle" narrative is overriding the 4-year clock.
• Red/Dark Blue (Regime Decay): Loss of Traction. The "Institutional" heartbeat is weakening. Volatility is rising as the engine stalls, drifting back toward the chaotic, un-buffered "Drift" patterns of the retail era.
• Blue Shaded Zones (Legacy DNA): SYSTEMIC CRASH. The price has breached the -50% "G-Force Threshold." At this depth, the correction carries the genetic makeup of a Legacy Bear Market (historically bottoming near -80%). The 4-year cycle is still very much alive—and it's painful.
Behind the Math: ECU Tuning
This script is an original quantitative work utilizing Gaussian Probability Density logic to categorize market drawdowns into distinct historical regimes.
Instead of simple binary "on/off" logic, the code acts like an ECU (Electronic Control Unit) , calculating the mathematical "fit" of the current drawdown against a specific Institutional Mean (-25%) . Why 25%? I chose -25% as the Institutional DNA anchor based on the structural shift observed between 2023 and 2025. While legacy retail cycles were defined by violent 30-40% "shakeouts" during bull phases, the introduction of spot ETFs and corporate treasury adoption has significantly compressed volatility. A -25% correction now represents the maximum "healthy" absorption of sell-side liquidity by institutional "bids." Staying near this level maintains high aerodynamic sync; dropping further suggests the chassis is failing.
How it Audits the Regime
The closer the price stays to this -25% target, the higher the Integrity Score (10/10). By providing unique "DNA Match" calculations and background shading based on specific threshold crossings, this indicator provides utility beyond standard price-change indicators. It allows you to mathematically distinguish between an "Institutional Rebalancing" and the start of a "Legacy Cycle-Ending Termination."
User Inputs & Navigation
• Rolling High Lookback: Default 52 Weeks . Defines our diagnostic lap. It ensures the audit focuses on the current race, not the entire history of the track.
• Inst. Drawdown Target: Default -25% . The "Perfect Pit Stop." Corrections near this level maintain the highest aerodynamic sync.
• Legacy Threshold: Default -50% . The "Point of No Return" where the engine enters total failure and the Blue Legacy Shading triggers.
• Legacy Crash Target: Default -80% . The historical baseline for previous 4-year cycle bear market floors (Expected mid-to-late 2026 in legacy models).
Instructions & Performance
• Preferred Timeframe: This is a macro-telemetry tool. It performs best on Weekly (1W) or Daily (1D) charts.
• The Dashboard: Monitor the INST. DNA MATCH in the table. A score of 8.0+ / 10 provides the "Green Light" that the Supercycle is still the primary driver, effectively breaking the 4-year "Crash" script.
Disclaimer
Trading and investing in digital assets involve significant risk. The Cycle Integrity Index (CII) is a quantitative tool for informational and educational purposes only. Past performance does not guarantee future results. This is not financial advice. Your capital is at risk.
Tags
robmaths, Rob Maths, Bitcoin, CycleTheory, Institutional, Drawdown, Quant, RegimeShift, CII
Check out my published scripts here: de.tradingview.com
AMT VWAP [hardi]█ OVERVIEW
AMT VWAP is a clean, minimalist VWAP indicator with Standard Deviation bands, designed to complement the Auction Market Theory (AMT) trading methodology by Fabio Valentino.
This indicator focuses on one thing and does it well: displaying VWAP and its deviation bands clearly on your chart.
█ FEATURES
- Daily VWAP with automatic reset
- ±1 Standard Deviation bands (cyan)
- ±2 Standard Deviation bands (orange) - extreme zones
- Clean labels that don't clutter your chart
- Info table showing current bias and zone
- Compact Mode for mobile/smartphone users
- Fully customizable colors and settings
- Built-in alerts for all levels
█ HOW TO USE
VWAP (Volume Weighted Average Price) represents the "fair value" where most volume has transacted. In AMT methodology:
BIAS DETERMINATION:
- Price ABOVE VWAP = Bullish bias (buyers in control)
- Price BELOW VWAP = Bearish bias (sellers in control)
TRADING ZONES:
- ±1 SD: Normal deviation zone - potential mean reversion area
- ±2 SD: Extreme zone - high probability reversal area (95%+ reversion rate)
ENTRY STRATEGIES:
1. Trend Following: Buy pullbacks to VWAP in uptrend, sell rallies to VWAP in downtrend
2. Mean Reversion: Fade moves at ±2 SD bands with confirmation
█ RECOMMENDED SETUP
Use this indicator together with:
- TradingView's built-in "SVP HD" (Session Volume Profile) for POC/VAH/VAL levels
- AMT CVD indicator (companion indicator) for order flow analysis
This combination gives you the complete AMT toolkit:
- SVP HD → Key levels (POC, VAH, VAL)
- AMT VWAP → Dynamic support/resistance & bias
- AMT CVD → Aggression, Absorption, Exhaustion signals
█ SETTINGS
Display Settings:
- Compact Mode - Enable for cleaner mobile view
- Show Labels - Toggle level labels
- Label Size - Adjust for your screen
VWAP Settings:
- Band Multipliers - Adjust SD band distance (default: 1.0 and 2.0)
- Colors - Fully customizable
- Line widths - Adjust visibility
Alerts:
- Near VWAP
- Near ±1 SD
- Near ±2 SD (extreme zones)
█ METHODOLOGY
This indicator is based on Auction Market Theory as taught by Fabio Valentino:
"The market is a continuous auction seeking fair value. VWAP represents this fair value dynamically throughout the session. Deviations from VWAP create trading opportunities as price tends to revert to the mean."
Key principles:
- Read, don't predict
- Location over technique
- Evidence-based entries
█ ALERTS
Set alerts for:
- Price approaching VWAP (potential support/resistance)
- Price at ±1 SD (first deviation - watch for reaction)
- Price at ±2 SD (extreme - high probability reversal zone)
█ NOTES
- Works on all timeframes
- Best used on 15m for intraday entries
- VWAP resets daily at market open
- Combine with volume profile for best results
█ CREDITS
Based on Auction Market Theory methodology by Fabio Valentino.
Indicator developed for the trading community.
If you find this useful, please leave a like! 👍
vwap, volume-weighted-average-price, standard-deviation, bands, auction-market-theory, amt, fabio-valentino, mean-reversion, trend-following, intraday, day-trading, support-resistance, fair-value
Mod_Capital MA 50 & MA 200 🔥 WHY ARE MA 50 AND MA 200 SO IMPORTANT?
These two moving averages are the key reference levels used by institutions, banks, and hedge funds to analyze the market.
📌 MA 50
Represents the medium-term trend
Acts as an active trading zone
Often holds price during pullbacks and corrections
📌 MA 200
Represents the long-term trend
Shows the overall market “health”
A major reference level for investors
🟢 Golden Cross & 🔴 Death Cross
🟢 Golden Cross
When MA 50 crosses above MA 200
→ A long-term bullish signal
🔴 Death Cross
When MA 50 crosses below MA 200
→ A long-term bearish signal
Vdubus TrixStoch + HMA FilterThe Bottom Indicator: "Vdubus TrixStoch HMA"
Purpose: Precision timing. It shows you exactly when the pullbacks happen.
The Top Indicator: "Vdubus Momentum Lock (Overlay)"
The Trigger Zones (48 / 52):
Buy Zone (Below 48): When the Blue line dips into this zone, the market is "reloading" for a buy.
Sell Zone (Above 52): When the Blue line pops into this zone, the market is "reloading" for a sell.
The Confluence Circles:
Green Dot ("Dip"): Appears only if HMA is Green AND Trix is Rising. This filters out bad buy signals during downtrends.
Red Dot ("Rally"): Appears only if HMA is Red AND Trix is Falling. This filters out bad sell signals during uptrends.
3. The Strategy:
A. Entry Logic (The Sniper)
Trend Check: Is HMA 100 Green or Red?
Momentum Check: Is TRIX 34 agreeing with the HMA?
Trigger:
Buy: Stoch K crosses under 48.
Sell: Stoch K crosses over 52.
Pulse Re-Entry: If Trix momentum was lost briefly but snaps back into alignment, re-enter immediately (even without a Stoch signal).
B. Exit Logic (The Safety)
Momentum Exit: If the TRIX slope flips against you (e.g., you are Long, but Trix turns down), CLOSE IMMEDIATELY.
Hard Deck (HMA Flip): If the HMA line changes color, CLOSE EVERYTHING. This is the emergency brake.
Vdubus Momentum Lock (Overlay)The Top Indicator: "Vdubus Momentum Lock (Overlay)"
The Bottom Indicator: "Vdubus TrixStoch HMA"
Purpose: Precision timing. It shows you exactly when the pullbacks happen.
The Trigger Zones (48 / 52):
Buy Zone (Below 48): When the Blue line dips into this zone, the market is "reloading" for a buy.
Sell Zone (Above 52): When the Blue line pops into this zone, the market is "reloading" for a sell.
The Confluence Circles:
Green Dot ("Dip"): Appears only if HMA is Green AND Trix is Rising. This filters out bad buy signals during downtrends.
Red Dot ("Rally"): Appears only if HMA is Red AND Trix is Falling. This filters out bad sell signals during uptrends.
3. The Strategy:
A. Entry Logic (The Sniper)
Trend Check: Is HMA 100 Green or Red?
Momentum Check: Is TRIX 34 agreeing with the HMA?
Trigger:
Buy: Stoch K crosses under 48.
Sell: Stoch K crosses over 52.
Pulse Re-Entry: If Trix momentum was lost briefly but snaps back into alignment, re-enter immediately (even without a Stoch signal).
B. Exit Logic (The Safety)
Momentum Exit: If the TRIX slope flips against you (e.g., you are Long, but Trix turns down), CLOSE IMMEDIATELY.
Hard Deck (HMA Flip): If the HMA line changes color, CLOSE EVERYTHING. This is the emergency brake.
Ripster Clouds (EMA + MTF)v6 EnhancedThis is the most complete, modern, and user-friendly version of the classic Ripster EMA Clouds indicator yet — fully updated for Pine Script @version
=6 (January 2026 compliant).What It DoesPlots up to 5 local timeframe EMA clouds (8-9, 5-12, 34-50, 72-89, 180-200) with authentic Ripster coloring and transparency.
Adds 3 higher-timeframe (MTF) clouds pulled from a user-defined resolution (default Daily): 50-55, 20-21, and 34-50 — perfect for big-picture bias on intraday charts.
Clouds dynamically change color based on which EMA is on top (bullish green/blue/teal/purple → bearish red/orange/yellow).
Optional slope-colored lines for short/long EMAs.
Clean, grouped inputs with intuitive toggles.
Why This Version Is Better Than Prior OnesFeature
Older Versions (v4/v5 originals & early ports)
This v6 Enhanced Version
Pine Version
v4 or v5 (some no longer fully supported)
Fully v6 compliant – compiles cleanly today
MTF Clouds
Either none or only 2, often no color flip
3 MTF clouds with full color flipping for clear higher-TF bias
Usability
Limited toggles, cluttered defaults
"Show All Clouds & Lines" quick toggle + per-cloud on/off + sensible defaults (clouds 4/5 off)
Visual Clarity
Mixed transparency, sometimes too busy
Optimized transparency & modern color palette (works great in dark/light themes)
Flexibility
Fixed source (usually hl2)
Choice of source (close, hl2, hlc3, ohlc4, etc.)
Alerts
Usually none
Built-in alerts on tightest cloud (8-9) cross – great for momentum entries
Performance
No limits set
max_lines_count, max_labels_count, max_bars_back for smooth operation
Code Quality
Older syntax, scattered inputs
Clean, well-commented, grouped sections – easy to read/modify
Best Use CasesIntraday (10–30 min): Local clouds for entries/pullbacks, MTF for daily bias.
Swing trading (1H, 4H, Daily): Wider clouds + MTF weekly for multi-day holds.
Works beautifully on QQQ, SPY, TSLA, NVDA and any liquid stock/ETF/index.
This script combines the best of the original Ripster local clouds with powerful multi-timeframe context — all in one clean, publish-ready indicator.Copy-paste ready for TradingView public library. Enjoy the edge! Here are examples of how this enhanced version looks on charts (rich layered clouds with MTF overlay):
Bloomberg Mega Board [v2.5 Fixed]Transform your TradingView chart into a professional-grade command center. Designed for traders who need high-level market awareness without switching tabs, this dashboard provides deep, multi-timeframe analysis across US Sectors, Commodities, Currencies, and Crypto.
Key Features
1. Multi-Asset Paging System Pine Script has a limit of 40 security calls, which usually limits how much data you can see. This script bypasses that limitation using a smart Paging System:
Sectors Page: Tracks the top 10 US Sectors (SPY, XLK, XLF, etc.) & Indices.
Commodities Page: Gold, Silver, Oil, Gas, Copper, Corn, etc.
Currencies Page: Major Forex pairs including DXY, EURUSD, USDJPY.
Crypto Page: Top 10 Cryptocurrencies by volume.
Switch pages instantly via the Settings menu.
2. Smart "News" Headlines Since Pine Script cannot access the live internet for news, this script uses an Algorithmic Headline Generator. It analyzes price action and trend alignment to generate a "Market Status" summary:
Full Bull Trend: Intraday + Daily + Weekly trends are all positive.
Strong Rally: Asset is up significantly (>1.25%) on the day.
Heavy Sell-off: Asset is down significantly (<-1.25%) on the day.
Pullback (Buy?): Daily trend is UP, but Intraday is DOWN (potential entry).
Consolidating: Market is chopping sideways.
3. Timeframe Trend Matrix Monitor momentum across the curve with a single glance. The "Trend" columns are powered by the 5 EMA (Exponential Moving Average):
Intraday: Adapts to your current chart timeframe (e.g., switch your chart to 15m to see the 15m trend).
Daily / Weekly / Monthly: These are hard coded to always show the higher timeframe trend, regardless of what chart you are looking at. Trend is determined by price in relation to it's 5 EMA.
4. "Terminal" Aesthetic
Styled with a dark, high-contrast Bloomberg Terminal look.
Uses Amber tickers and Neon status blocks for rapid visual scanning.
Optimized for Full Screen Mode: Hide your main chart candles to turn your monitor into a dedicated data dashboard.
How to Use
Add the indicator to your chart and move it to "New Lower Indicator" Then repeat 4 times for each dashboard.
Open Settings (the gear icon) and find "Select Page".
Choose your desired market view (e.g., Sectors, Crypto, Currencies, Commodities)
Optional: To replicate the full dashboard look, go to your Chart Settings -> Symbol -> Uncheck "Body" and "Borders" to hide the candles behind the table.
2 hours ago
Release Notes
Transform your TradingView chart into a professional-grade command center. Designed for traders who need high-level market awareness without switching tabs, this dashboard provides deep, multi-timeframe analysis across US Sectors, Commodities, Currencies, and Crypto.
Key Features
1. Multi-Asset Paging System Pine Script has a limit of 40 security calls, which usually limits how much data you can see. This script bypasses that limitation using a smart Paging System:
Sectors Page: Tracks the top 10 US Sectors (SPY, XLK, XLF, etc.) & Indices.
Commodities Page: Gold, Silver, Oil, Gas, Copper, Corn, etc.
Currencies Page: Major Forex pairs including DXY, EURUSD, USDJPY.
Crypto Page: Top 10 Cryptocurrencies by volume.
Switch pages instantly via the Settings menu.
2. Smart "News" Headlines Since Pine Script cannot access the live internet for news, this script uses an Algorithmic Headline Generator. It analyzes price action and trend alignment to generate a "Market Status" summary:
Full Bull Trend: Intraday + Daily + Weekly trends are all positive.
Strong Rally: Asset is up significantly (>1.25%) on the day.
Heavy Sell-off: Asset is down significantly (<-1.25%) on the day.
Pullback (Buy?): Daily trend is UP, but Intraday is DOWN (potential entry).
Consolidating: Market is chopping sideways.
3. Timeframe Trend Matrix Monitor momentum across the curve with a single glance. The "Trend" columns are powered by the 5 EMA (Exponential Moving Average):
Intraday: Adapts to your current chart timeframe (e.g., switch your chart to 15m to see the 15m trend).
Daily / Weekly / Monthly: These are hard coded to always show the higher timeframe trend, regardless of what chart you are looking at. Trend is determined by price in relation to it's 5 EMA.
4. "Terminal" Aesthetic
Styled with a dark, high-contrast Bloomberg Terminal look.
Uses Amber tickers and Neon status blocks for rapid visual scanning.
Optimized for Full Screen Mode: Hide your main chart candles to turn your monitor into a dedicated data dashboard.
How to Use
Add the indicator to your chart and move it to "New Lower Indicator" Then repeat 4 times for each dashboard.
Open Settings (the gear icon) and find "Select Page".
Choose your desired market view (e.g., Sectors, Crypto, Currencies, Commodities)
Optional: To replicate the full dashboard look, go to your Chart Settings -> Symbol -> Uncheck "Body" and "Borders" to hide the candles behind the table.
2 hours ago
Release Notes
Transform your TradingView chart into a professional-grade command center. Designed for traders who need high-level market awareness without switching tabs, this dashboard provides deep, multi-timeframe analysis across US Sectors, Commodities, Currencies, and Crypto.
Key Features
1. Multi-Asset Paging System Pine Script has a limit of 40 security calls, which usually limits how much data you can see. This script bypasses that limitation using a smart Paging System:
Sectors Page: Tracks the top 10 US Sectors (SPY, XLK, XLF, etc.) & Indices.
Commodities Page: Gold, Silver, Oil, Gas, Copper, Corn, etc.
Currencies Page: Major Forex pairs including DXY, EURUSD, USDJPY.
Crypto Page: Top 10 Cryptocurrencies by volume.
Switch pages instantly via the Settings menu.
2. Smart "News" Headlines Since Pine Script cannot access the live internet for news, this script uses an Algorithmic Headline Generator. It analyzes price action and trend alignment to generate a "Market Status" summary:
Full Bull Trend: Intraday + Daily + Weekly trends are all positive.
Strong Rally: Asset is up significantly (>1.25%) on the day.
Heavy Sell-off: Asset is down significantly (<-1.25%) on the day.
Pullback (Buy?): Daily trend is UP, but Intraday is DOWN (potential entry).
Consolidating: Market is chopping sideways.
3. Timeframe Trend Matrix Monitor momentum across the curve with a single glance. The "Trend" columns are powered by the 5 EMA (Exponential Moving Average):
Intraday: Adapts to your current chart timeframe (e.g., switch your chart to 15m to see the 15m trend).
Daily / Weekly / Monthly: These are hard coded to always show the higher timeframe trend, regardless of what chart you are looking at. Trend is determined by price in relation to it's 5 EMA.
4. "Terminal" Aesthetic
Styled with a dark, high-contrast Bloomberg Terminal look.
Uses Amber tickers and Neon status blocks for rapid visual scanning.
Optimized for Full Screen Mode: Hide your main chart candles to turn your monitor into a dedicated data dashboard.
How to Use
Add the indicator to your chart and move it to "New Lower Indicator" Then repeat 4 times for each dashboard.
Open Settings (the gear icon) and find "Select Page".
Choose your desired market view (e.g., Sectors, Crypto, Currencies, Commodities)
Optional: To replicate the full dashboard look, go to your Chart Settings -> Symbol -> Uncheck "Body" and "Borders" to hide the candles behind the table.
2 hours ago
Release Notes
Transform your TradingView chart into a professional-grade command center. Designed for traders who need high-level market awareness without switching tabs, this dashboard provides deep, multi-timeframe analysis across US Sectors, Commodities, Currencies, and Crypto.
Key Features
1. Multi-Asset Paging System Pine Script has a limit of 40 security calls, which usually limits how much data you can see. This script bypasses that limitation using a smart Paging System:
Sectors Page: Tracks the top 10 US Sectors (SPY, XLK, XLF, etc.) & Indices.
Commodities Page: Gold, Silver, Oil, Gas, Copper, Corn, etc.
Currencies Page: Major Forex pairs including DXY, EURUSD, USDJPY.
Crypto Page: Top 10 Cryptocurrencies by volume.
Switch pages instantly via the Settings menu.
2. Smart "News" Headlines Since Pine Script cannot access the live internet for news, this script uses an Algorithmic Headline Generator. It analyzes price action and trend alignment to generate a "Market Status" summary:
Full Bull Trend: Intraday + Daily + Weekly trends are all positive.
Strong Rally: Asset is up significantly (>1.25%) on the day.
Heavy Sell-off: Asset is down significantly (<-1.25%) on the day.
Pullback (Buy?): Daily trend is UP, but Intraday is DOWN (potential entry).
Consolidating: Market is chopping sideways.
3. Timeframe Trend Matrix Monitor momentum across the curve with a single glance. The "Trend" columns are powered by the 5 EMA (Exponential Moving Average):
Intraday: Adapts to your current chart timeframe (e.g., switch your chart to 15m to see the 15m trend).
Daily / Weekly / Monthly: These are hard coded to always show the higher timeframe trend, regardless of what chart you are looking at. Trend is determined by price in relation to it's 5 EMA.
4. "Terminal" Aesthetic
Styled with a dark, high-contrast Bloomberg Terminal look.
Uses Amber tickers and Neon status blocks for rapid visual scanning.
Optimized for Full Screen Mode: Hide your main chart candles to turn your monitor into a dedicated data dashboard.
How to Use
Add the indicator to your chart and move it to "New Lower Indicator" Then repeat 4 times for each dashboard.
Open Settings (the gear icon) and find "Select Page".
Choose your desired market view (e.g., Sectors, Crypto, Currencies, Commodities)
Optional: To replicate the full dashboard look, go to your Chart Settings -> Symbol -> Uncheck "Body" and "Borders" to hide the candles behind the table.
