立即開始

在腳本中搜尋"scalp"

The Vostro Indicator by KIVANÇ fr3762The VOSTRO indicator is a trend indicator that automatically provides buying and selling signals. The indicator marks in a window the potential turning points. The indicator is recommended for scalping. The Vostro indicator determines the overbought zones (value greater than +80) and the oversold zones (less than the -80 level) BUY signal: The Vostro curve moves below the -80 level and forms a trough – Turnaround of the upward trend SELL signal: The Vostro curve moves above the +80 level and forms a peak – Downward trend further info: www.prorealcode.com Here's the link to a complete list of all my indicators: t.co Yazar: KıvanÇ @fr3762 twitter Şimdiye kadar paylaştığım indikatörlerin tam listesi için: t.co
Pine Script®指標
由KivancOzbilgic提供
7
Relative Vigor IndexHere we are looking at a trend strength indicator based on the Relative Vigor Index(RVI). The RVI measures trend strength by comparing the open-close and high-low ranges for the current and three most recent periods. As a zero-centered oscillator, the RVI oscillates above and below zero to signal the strength of the trend. As there are different ways to interpret the RVI, we have included 3 different modes for traders to choose from in the input option menu: 1. Zero-Crossing: The RVI Histogram will turn green when it crosses above zero and red when it crosses below. Therefore, a green RVI means the trend is bullish and red means bearish. This mode is better for longer-term swing trading in comparison to the other 2 modes. 2. Increasing / Decreasing: The RVI histogram will turn green when it is increasing(rvi >= rvi ) and red when it is decreasing. A green RVI is viewed as a bullish signal and red means bearish. This mode is a good middle-ground between the Zero-Crossing and Signal Comparison modes. 3. Signal Comparison: Here, the RVI is compared to its signal line. If the RVI is greater than its signal line, the histogram is green, indicating a bullish trend, while red means bearish. This mode is preferred for scalping. Hope everyone finds this one useful! You can check out our other invite only studies/strategies at our website: profitprogrammers.com
Pine Script®指標
由ProfitProgrammers提供
3
Key Levels [@treypeng]Draws horizontal lines for Daily, Hourly (1) and Weekly levels. Really handy to switch on quickly when scalping. Light blue: Previous hour OHLC Thick light blue: Previous hour Close / current hour Open Dark blue: Yesterday OHLC Thick dark blue: Yesterday Close / today Open Purple: Weekly Open It's a bit ugly, I'd prefer horizontal rays instead of lines stretching back across the chart but I couldn't figure out how to do this in PineScript. If I get it sorted, I'll publish an update.
Pine Script®指標
由trespeng提供
2
MP ZeroLag EMANew script based on zlema. Hopefully responds better tot ake advantage of margin trading. As usual, commands for both spot trading and margin trading are included, just need to comment or uncomment (using // ) which you prefer. They are just labels so both work in the same way (long/buy, short/sell). Also added some flair to pretty it up a bit, and yes, those divergences are in fact functional, but not really part of the script (disclosure- the divergences are taken from DonovanWall's ideas, full credit here). There is a "new stuff" section, which you CAN use, but right now it was for art and introduced way too many functions at once to be of any use, but feel free to explore as an Easter Egg :) Autoview friendly in design :) As usual, all proceeds go to the betterment of these scripts as well as my upcoming surgery (Carpel Tunnel Syndrome, yuck) 1Dsg49Zt2FQ9BnUHrmXQwvhL5dd3teqa7g ltc addy- LYUpgsHSHnKeYdNaj9bu9prK4QsnJXEQtP pinkcoin addy- 2PoeXyAk3rF9FmMC8azme2mGzMYsEiZ5eS
Pine Script®策略
由pocketlint提供
3
Two Bar Break Line Alerts R1.0 by JustUncleLThis indicator with default settings is designed for BINARY OPTIONS trading. The indicator can also be used for Forex trading with some setting changes. The script shows Two Bar Pullback Break lines and alerts when those Break lines are Touched (broken) creating a short term momentum entry condition. For a Bullish Break (Green Up Arrow) to occur: first must have two (or three) consecutive bear (red) candles which is followed by a bull (green) candle creating a pivot point. The breakout occurs then the High of the current Bull (green) exceeds the highest point of the previous two (or three) pivotal bear candles. The green channel Line shows where the current Bullish BreakOut occurs. For a Bearish Break (Red Down Arrow) to occur: first must have two (or three) consecutive bull (green) candles which is followed by a bear (red) candle creating a pivot point. The breakout occurs when the Low of the current Bear (red) drops below the lowest point of the previous two (or three) pivotal Bull candles. The red channel Line shows where the current Bearish BreakOut occurs. The break Line Arrows can optionally be filtered by the Coloured MA (enabled by default), a longer term directional MA (disabled by default) and/or a MACD condition (enabled by default) as a momentum filter. You can optionally select three Bar break lines instead of two. The three bar break lines are actually equivalent to Guppy's Three Bar Count Back Line method for trade entries (see Guppy's video reference below). Included in this indicator is an ability to display some basic Binary Option statistics, when enabled (enabled by default) it shows Successful Bars in Yellow and failed Bars in Black and the last Nine numbers on the script title line represent the Binary option Statistics in order: %ITM rate Total orders Successful Orders Failed Orders Total candles tested Candles per Day Trades per Day Max Consecutive Wins Max Consecutive Losses You can start the Binary Option statistics from a specific Date, which is handy for checking more recent history. HINTS: BINARY OPTIONS trading: use 5min, 15m, 1hr or even Daily charts. Trade after the price touches one of the Breakout lines and the Arrow first appears. Wait for the price to come back from Break Line by 1 or 2 pips, the alert arrow must stay on and candle change to black, then take Binary trade expiry End of Candle. If price pull back and arrow turns off, don't trade this candle, move on you probably don't have momentum, there will be plenty of other trigger events. The backtesting results are good with ITM rates 65% to 72% on many currency pairs, commodities and indices. Realtime trading has confirmed the backtesting results and they could even be bettered, provided you are selective on which signals to trade (strong MACD support etc), that you are patient and disciplined to this trading method. FOREX trading: the default settings should work with scalping. For longer term trades try with settings change to a more standard MACD filter or slower to catch the longer term momentum swings and the idea would be to trade the first Break Line alert that occurs after a decent Pullback in the direction of the trend. Setting the SL to just above/below the Pivot High/Low and set target to two or three times SL. References: "Fundamentals of Price Action Trading for Forex, Stocks, Options and Futures" video: www.youtube.com Other videos by "basecamptrading" on Naked Trading. "Taking Profits in Today's Market by Daryl Guppy" video: www.youtube.com
Pine Script®指標
由JustUncleL提供
23
Pivot Boss 4 EMA Summary: Creates one indicator with four exponential moving averages based off the central pivot point which assists you in trading pure price action using floor pivots. This also helps you to avoid getting chopped up during price confluence. How to use: When T-Line cross Green Short EMA it can be used for scalping. When Short EMA pulls back to Medium EMA you can buy more or sell more without having to exit your position prematurely before trend direction changes. This can also be used as position entry points to make sure you are getting the best possible price. When T-Line, Short EMA and Medium EMA cross over Long EMA you go long or short.
Pine Script®指標
由DavidR.提供
14
BTC Event Contract Signal Indicator# BTC Event Contract Signal Indicator **Version**: V1.0 **Last Updated**: December 21, 2024 **Author**: OxJohannWu **Type**: Pine Script v6 Indicator (Overlay) **Timeframes**: Optimized for 1-minute BTC data, supports all timeframes ## 📋 Overview The BTC Event Contract Signal Indicator is a sophisticated technical analysis tool designed specifically for Bitcoin event contracts (binary options). This indicator provides real-time buy/sell signals with comprehensive contract tracking, performance statistics, and settlement monitoring - all displayed in Beijing time (UTC+8). ### Key Features - **Smart Signal Generation**: Multi-layered technical analysis with adaptive filtering - **Real-time Contract Tracking**: Monitor active contracts with automatic settlement detection - **Performance Analytics**: Detailed win/loss statistics with daily breakdowns - **Multi-timeframe Optimization**: Auto-adjusts parameters based on chart timeframe - **Beijing Time Display**: All timestamps converted to Beijing timezone - **Alert System**: TradingView alerts for all signal types ## 🎯 Trading Philosophy This indicator combines correlation analysis, MACD momentum, and StochRSI oscillator signals to identify high-probability entry points for Bitcoin event contracts. The system prioritizes quality over quantity, using intelligent filtering to minimize false signals and maximize win rates. ## ⚙️ Parameter Configuration ### 📊 Technical Indicator Settings - **Auto Timeframe Optimization**: Automatically selects optimal parameters based on current timeframe - **MACD Settings**: Fast (8), Slow (21), Signal (5) - optimized for 1-minute BTC data - **RSI Period**: 6 periods for responsive momentum detection - **Stochastic Settings**: K smoothing (2), Period (6) for precise overbought/oversold levels ### 🔗 Correlation Analysis - **Short-term Correlation**: 3-period correlation for immediate trend changes - **Long-term Correlation**: 25-period correlation for broader market context - **Correlation Slope**: Tracks momentum changes in price correlation ### 🎯 Smart Signal Optimization Three intelligent modes to suit different trading styles: #### Smart Balance Mode (Default) - **Target Win Rate**: 80%+ - **Expected Signals**: 8-15 per day - **Filtering**: 6-7 technical conditions - **Best For**: Balanced trading with consistent profits #### High Frequency Mode - **Target Win Rate**: 75%+ - **Expected Signals**: 15-25 per day - **Filtering**: 4 core technical conditions - **Best For**: Active traders seeking more opportunities #### Premium Quality Mode - **Target Win Rate**: 85%+ - **Expected Signals**: 5-10 per day - **Filtering**: 8 strict technical conditions - **Best For**: Conservative traders prioritizing accuracy ### ⏰ Event Contract Settings - **Contract Duration Options**: 10 Minutes, 30 Minutes, 1 Hour, 24 Hours - **Single Contract Rule**: Only one active contract at a time - **Auto Settlement**: Automatic win/loss detection at expiry ## 📈 Signal Generation Logic ### Core Technical Conditions 1. **Correlation Breakout**: Short-term correlation slope changes direction 2. **MACD Momentum**: MACD line above/below signal line with positive/negative slope 3. **StochRSI Position**: K-line slope changes indicating momentum shift ### Smart Filtering System The indicator applies progressive filtering based on selected mode: #### Basic Filters (All Modes) - Volume above 1.4x average - Correlation momentum confirmation - MACD direction alignment #### Advanced Filters (Smart Balance & Premium) - Price action quality (body-to-wick ratio > 0.4) - Momentum strength validation - RSI safe zone (25-75 range) - Optional trend filter with EMA confirmation - Optional multi-timeframe confirmation #### Premium Filters (Premium Quality Only) - Enhanced volume threshold (1.8x average) - Stricter correlation momentum (>1.0) - Multi-timeframe EMA alignment - Advanced momentum validation ### Signal Strength Classification - **Normal Signals**: Basic technical alignment (small arrows) - **Strong Signals**: Enhanced momentum + volume confirmation (large arrows) ## 🎨 Visual Display System ### Signal Arrows - **🔼 Green Triangle Up**: Call signal (buy/long) - **🔽 Red Triangle Down**: Put signal (sell/short) - **💪 Enhanced Arrows**: Strong signals with special emoji indicators ### Settlement Results - **🎉 WIN**: Profitable contracts (green) - **💸 LOSS**: Losing contracts (red) - **Automatic Display**: Shows results immediately upon contract expiry ### Information Labels Each signal displays: - Signal type (Call/Put, Normal/Strong) - Selected mode and timeframe - Contract duration - Settlement results with win/loss indication ## 📊 Statistics Dashboard ### Real-time Performance Table Located in the top-right corner, displaying: #### Summary Statistics - **Total Contracts**: Overall contract count - **Overall Win Rate**: Percentage with color coding (Green: 80%+, Orange: 60-79%, Red: <60%) - **Today's Performance**: Daily statistics with separate tracking - **Win/Loss Breakdown**: Detailed count of profitable vs losing trades #### Directional Analysis - **Call Performance**: Success rate for bullish contracts - **Put Performance**: Success rate for bearish contracts - **Balanced Tracking**: Identifies directional bias in performance #### System Status - **Filter Mode**: Current smart filter status (Smart✓/Basic✗) - **Contract Duration**: Selected timeframe - **Beijing Time**: Real-time timestamp display - **Current Price**: Live BTC/USDT price - **Contract Status**: Active contract indicator (🔄 Active/✅ Ready) ## 💡 Usage Guidelines ### Optimal Setup 1. **Recommended Timeframe**: 1-minute for maximum signal frequency 2. **Symbol**: BTCUSDT or BTCUSD perpetual futures 3. **Mode Selection**: Start with "Smart Balance" for consistent performance 4. **Contract Duration**: Begin with 10-minute contracts for faster feedback ### Best Practices - **Pre-market Analysis**: Check overall market conditions before trading - **Risk Management**: Never risk more than 2-3% of capital per contract - **Session Timing**: Best performance during high-volume trading sessions - **Signal Confirmation**: Wait for arrow + label confirmation before entry - **Performance Monitoring**: Regularly review win rate statistics ### Trading Sessions - **Asian Session**: 00:00-08:00 Beijing Time (moderate volatility) - **European Session**: 15:00-23:00 Beijing Time (high volatility) - **US Session**: 21:00-05:00 Beijing Time (peak volatility) ## 🚨 Alert Configuration ### Available Alerts 1. **BTC Call Signal**: Basic bullish signal alerts 2. **BTC Put Signal**: Basic bearish signal alerts 3. **BTC Strong Call Signal**: High-quality bullish signals 4. **BTC Strong Put Signal**: High-quality bearish signals ### Alert Setup ``` Alert Condition: Select from dropdown Frequency: Once Per Bar Close Expiration: No expiration (for continuous monitoring) Webhook: Optional for automated trading systems ``` ### Alert Message Format ``` 🚀 BTC Event Contract Call Signal ⏰ Time: 💰 Price: $ ``` ## 🔧 Advanced Configuration ### Parameter Optimization - **Auto-Optimization Enabled**: Uses predefined optimized parameters - **Manual Override**: Disable auto-optimization for custom parameter testing - **Timeframe Adaptation**: Parameters automatically adjust for 1-min, 3-min, and higher timeframes ### Filter Customization - **Volume Filter**: Adjustable multiplier (1.1-2.5x) - **Trend Filter**: Optional EMA trend confirmation - **Advanced Confirmation**: Multi-timeframe validation - **Smart Filter**: Toggle for intelligent filtering system ## 📈 Performance Expectations ### Historical Backtesting Results Based on extensive BTCUSDT 1-minute data testing: #### Smart Balance Mode - **Average Win Rate**: 78-82% - **Daily Signals**: 10-15 - **Best Sessions**: European/US overlap - **Recommended For**: Most traders #### High Frequency Mode - **Average Win Rate**: 73-77% - **Daily Signals**: 18-25 - **Best Sessions**: High volatility periods - **Recommended For**: Active scalpers #### Premium Quality Mode - **Average Win Rate**: 83-87% - **Daily Signals**: 6-10 - **Best Sessions**: Trending market conditions - **Recommended For**: Conservative traders ## ⚠️ Risk Warnings ### Important Disclaimers - **High-Risk Trading**: Event contracts involve significant risk of loss - **Market Volatility**: Cryptocurrency markets are highly volatile and unpredictable - **No Guarantee**: Past performance does not guarantee future results - **Capital Risk**: Only trade with funds you can afford to lose completely ### Risk Management Guidelines - **Position Sizing**: Never risk more than 1-2% per trade - **Daily Limits**: Set maximum daily loss limits - **Emotional Control**: Avoid revenge trading after losses - **Market Conditions**: Adjust exposure based on volatility - **Continuous Monitoring**: Regularly assess indicator performance ## 🔄 Version History ### V1.0 (December 21, 2024) - Initial English release - Complete translation from Chinese version - Optimized for international users - Enhanced documentation with detailed explanations - Maintained all original functionality and performance characteristics ## 🛠️ Technical Specifications ### Pine Script Details - **Version**: Pine Script v6 - **Type**: Indicator with overlay=true - **Max Objects**: 500 boxes, 500 labels - **Memory Optimization**: Efficient array and map usage - **Performance**: Optimized for real-time execution ### System Requirements - **Platform**: TradingView Pro, Pro+, or Premium - **Browser**: Modern browser with JavaScript enabled - **Connection**: Stable internet for real-time data - **Display**: Minimum 1080p resolution recommended ## 📞 Support & Updates ### Getting Help - **Documentation**: Refer to this comprehensive guide - **Common Issues**: Check parameter settings and timeframe compatibility - **Performance**: Verify market conditions and volatility levels ### Update Policy - **Regular Updates**: Continuous optimization based on market conditions - **Version Tracking**: All changes documented with version numbers - **Backward Compatibility**: Settings preserved across updates --- **Disclaimer**: This indicator is for educational and analysis purposes only. Trading cryptocurrencies and event contracts involves substantial risk. Always conduct your own research and consider your risk tolerance before trading. The authors are not responsible for any trading losses incurred through the use of this indicator.
Pine Script®指標
由OxJohannWu提供
Multi MA 10 Lines PRO (Custom Label + Crossover Icon)Multi MA 10 Lines PRO – 10 Custom MAs, Dynamic Labels & Persistent Crossover Symbols The ultimate professional Moving Average indicator — plot up to 10 fully customizable MAs (type, timeframe, color, width, style), display live price labels (value, % distance, or custom text), plus advanced ATR cross markers on every crossover (MA1/MA2). NEW: All MA crossovers are marked with persistent symbols (choose icon, color, size) — instantly spot every golden/death cross in your backtest! Complete flexibility for scalpers, swing traders, and serious strategists.
Pine Script®指標
由MILO888提供
VWAP Supply & Demand Zones PRO**Overview:** This script represents a major evolution of the original "VWAP Supply and Demand Zones" indicator. Initially created to explore price interaction with VWAP, it has now matured into a robust and feature-rich tool for identifying high-probability zones of institutional buying and selling pressure. The update introduces volume and momentum validation, dynamic zone management, alert logic, and a visual dashboard (HUD) — all designed for improved precision and clarity. The structural improvements, anti-repainting logic, and significant added utility warranted releasing this as a new script rather than a minor update. --- ### What It Does: This indicator dynamically detects **supply and demand zones** using VWAP-based logic combined with **volume** and **momentum confirmation**. When price crosses VWAP with strength, it identifies the potential zone of excess demand (below VWAP) or supply (above VWAP), marking it visually with colored regions on the chart. Each zone is extended for a user-defined duration, monitored for touch interactions (tests), and tracked for possible breaks. The script helps traders interpret price behavior around these institutional zones as either **reversal** opportunities or **continuation** confirmation depending on context and strategy preference. --- ### How It Works: * **VWAP Basis**: Zones are anchored at VWAP at the time of a significant cross. * **Volume & Momentum Filters**: Crosses are only considered valid if backed by above-average volume and notable price momentum. * **Zone Drawing**: Validated supply and demand zones are drawn as boxes on the chart. Each is extended forward for a customizable number of bars. * **Touch Counting**: Zones track the number of price touches. Alerts are issued after a user-defined number of tests. * **Break Detection**: If price closes significantly beyond a zone boundary, the zone is marked as broken and visually dimmed. * **Visual Dashboard (HUD)**: A compact real-time HUD displays VWAP value, active zone counts, and current market bias. --- ### How to Use It: **Reversal Trading:** * Look for price **rejecting** a zone after touching it. * Use rejection candles or secondary indicators (e.g., RSI divergence) to confirm. * These setups may offer low-risk entries when price respects the zone. **Continuation Trading:** * A **break of a zone** suggests strong directional bias. * Use confirmed zone breaks to enter in the direction of momentum. * Ideal in trending environments, especially with high volume and ATR movement. --- ### Key Inputs: * **VWAP Length**: Moving VWAP period (default: 20) * **Zone Width %**: Percentage size of zone buffer (default: 0.5%) * **Min Touches**: How many times price must test a zone before alerts trigger * **Zone Extension**: How far into the future zones are projected * **Volume & ATR Filters**: Ensure only strong, valid crossovers create zones --- ### Alerts: You can enable alerts for: * **New zone creation** * **Zone tests (after minimum touch count)** * **Zone breaks** * **VWAP crosses** * **Active presence inside a zone (entry conditions)** These alerts help automate market monitoring, making it suitable for discretionary or systematic workflows. --- ### Why It's a New Script: This is not a cosmetic update. The internal logic, signal generation, filtering methodology, visual engine, and UX framework have been entirely rebuilt from the ground up. The result is a highly adaptive, precision-oriented tool — appropriate for intraday scalpers and swing traders alike. It goes far beyond the original in terms of functionality and reliability, justifying a fresh release. --- ### Suitable Markets and Timeframes: * Works across all liquid markets (crypto, equities, futures, forex) * Best used on timeframes where volume data is stable (5m and above recommended) * Recalibrate inputs for optimal detection across instruments
Pine Script®指標
由Finntech1提供
3
Market Zone Analyzer[BullByte]Understanding the Market Zone Analyzer --- 1. Purpose of the Indicator The Market Zone Analyzer is a Pine Script™ (version 6) indicator designed to streamline market analysis on TradingView. Rather than scanning multiple separate tools, it unifies four core dimensions—trend strength, momentum, price action, and market activity—into a single, consolidated view. By doing so, it helps traders: • Save time by avoiding manual cross-referencing of disparate signals. • Reduce decision-making errors that can arise from juggling multiple indicators. • Gain a clear, reliable read on whether the market is in a bullish, bearish, or sideways phase, so they can more confidently decide to enter, exit, or hold a position. --- 2. Why a Trader Should Use It • Unified View: Combines all essential market dimensions into one easy-to-read score and dashboard, eliminating the need to piece together signals manually. • Adaptability: Automatically adjusts its internal weighting for trend, momentum, and price action based on current volatility. Whether markets are choppy or calm, the indicator remains relevant. • Ease of Interpretation: Outputs a simple “BULLISH,” “BEARISH,” or “SIDEWAYS” label, supplemented by an intuitive on-chart dashboard and an oscillator plot that visually highlights market direction. • Reliability Features: Built-in smoothing of the net score and hysteresis logic (requiring consecutive confirmations before flips) minimize false signals during noisy or range-bound phases. --- 3. Why These Specific Indicators? This script relies on a curated set of well-established technical tools, each chosen for its particular strength in measuring one of the four core dimensions: 1. Trend Strength: • ADX/DMI (Average Directional Index / Directional Movement Index): Measures how strong a trend is, and whether the +DI line is above the –DI line (bullish) or vice versa (bearish). • Moving Average Slope (Fast MA vs. Slow MA): Compares a shorter-period SMA to a longer-period SMA; if the fast MA sits above the slow MA, it confirms an uptrend, and vice versa for a downtrend. • Ichimoku Cloud Differential (Senkou A vs. Senkou B): Provides a forward-looking view of trend direction; Senkou A above Senkou B signals bullishness, and the opposite signals bearishness. 2. Momentum: • Relative Strength Index (RSI): Identifies overbought (above its dynamically calculated upper bound) or oversold (below its lower bound) conditions; changes in RSI often precede price reversals. • Stochastic %K: Highlights shifts in short-term momentum by comparing closing price to the recent high/low range; values above its upper band signal bullish momentum, below its lower band signal bearish momentum. • MACD Histogram: Measures the difference between the MACD line and its signal line; a positive histogram indicates upward momentum, a negative histogram indicates downward momentum. 3. Price Action: • Highest High / Lowest Low (HH/LL) Range: Over a defined lookback period, this captures breakout or breakdown levels. A closing price near the recent highs (with a positive MA slope) yields a bullish score, and near the lows (with a negative MA slope) yields a bearish score. • Heikin-Ashi Doji Detection: Uses Heikin-Ashi candles to identify indecision or continuation patterns. A small Heikin-Ashi body (doji) relative to recent volatility is scored as neutral; a larger body in the direction of the MA slope is scored bullish or bearish. • Candle Range Measurement: Compares each candle’s high-low range against its own dynamic band (average range ± standard deviation). Large candles aligning with the prevailing trend score bullish or bearish accordingly; unusually small candles can indicate exhaustion or consolidation. 4. Market Activity: • Bollinger Bands Width (BBW): Measures the distance between BB upper and lower bands; wide bands indicate high volatility, narrow bands indicate low volatility. • Average True Range (ATR): Quantifies average price movement (volatility). A sudden spike in ATR suggests a volatile environment, while a contraction suggests calm. • Keltner Channels Width (KCW): Similar to BBW but uses ATR around an EMA. Provides a second layer of volatility context, confirming or contrasting BBW readings. • Volume (with Moving Average): Compares current volume to its moving average ± standard deviation. High volume validates strong moves; low volume signals potential lack of conviction. By combining these tools, the indicator captures trend direction, momentum strength, price-action nuances, and overall market energy, yielding a more balanced and comprehensive assessment than any single tool alone. --- 4. What Makes This Indicator Stand Out • Multi-Dimensional Analysis: Rather than relying on a lone oscillator or moving average crossover, it simultaneously evaluates trend, momentum, price action, and activity. • Dynamic Weighting: The relative importance of trend, momentum, and price action adjusts automatically based on real-time volatility (Market Activity State). For example, in highly volatile conditions, trend and momentum signals carry more weight; in calm markets, price action signals are prioritized. • Stability Mechanisms: • Smoothing: The net score is passed through a short moving average, filtering out noise, especially on lower timeframes. • Hysteresis: Both Market Activity State and the final bullish/bearish/sideways zone require two consecutive confirmations before flipping, reducing whipsaw. • Visual Interpretation: A fully customizable on-chart dashboard displays each sub-indicator’s value, regime, score, and comment, all color-coded. The oscillator plot changes color to reflect the current market zone (green for bullish, red for bearish, gray for sideways) and shows horizontal threshold lines at +2, 0, and –2. --- 5. Recommended Timeframes • Short-Term (5 min, 15 min): Day traders and scalpers can benefit from rapid signals, but should enable smoothing (and possibly disable hysteresis) to reduce false whipsaws. • Medium-Term (1 h, 4 h): Swing traders find a balance between responsiveness and reliability. Less smoothing is required here, and the default parameters (e.g., ADX length = 14, RSI length = 14) perform well. • Long-Term (Daily, Weekly): Position traders tracking major trends can disable smoothing for immediate raw readings, since higher-timeframe noise is minimal. Adjust lookback lengths (e.g., increase adxLength, rsiLength) if desired for slower signals. Tip: If you keep smoothing off, stick to timeframes of 1 h or higher to avoid excessive signal “chatter.” --- 6. How Scoring Works A. Individual Indicator Scores Each sub-indicator is assigned one of three discrete scores: • +1 if it indicates a bullish condition (e.g., RSI above its dynamically calculated upper bound). • 0 if it is neutral (e.g., RSI between upper and lower bounds). • –1 if it indicates a bearish condition (e.g., RSI below its dynamically calculated lower bound). Examples of individual score assignments: • ADX/DMI: • +1 if ADX ≥ adxThreshold and +DI > –DI (strong bullish trend) • –1 if ADX ≥ adxThreshold and –DI > +DI (strong bearish trend) • 0 if ADX < adxThreshold (trend strength below threshold) • RSI: • +1 if RSI > RSI_upperBound • –1 if RSI < RSI_lowerBound • 0 otherwise • ATR (as part of Market Activity): • +1 if ATR > (ATR_MA + stdev(ATR)) • –1 if ATR < (ATR_MA – stdev(ATR)) • 0 otherwise Each of the four main categories shares this same +1/0/–1 logic across their sub-components. B. Category Scores Once each sub-indicator reports +1, 0, or –1, these are summed within their categories as follows: • Trend Score = (ADX score) + (MA slope score) + (Ichimoku differential score) • Momentum Score = (RSI score) + (Stochastic %K score) + (MACD histogram score) • Price Action Score = (Highest-High/Lowest-Low score) + (Heikin-Ashi doji score) + (Candle range score) • Market Activity Raw Score = (BBW score) + (ATR score) + (KC width score) + (Volume score) Each category’s summed value can range between –3 and +3 (for Trend, Momentum, and Price Action), and between –4 and +4 for Market Activity raw. C. Market Activity State and Dynamic Weight Adjustments Rather than contributing directly to the netScore like the other three categories, Market Activity determines how much weight to assign to Trend, Momentum, and Price Action: 1. Compute Market Activity Raw Score by summing BBW, ATR, KCW, and Volume individual scores (each +1/0/–1). 2. Bucket into High, Medium, or Low Activity: • High if raw Score ≥ 2 (volatile market). • Low if raw Score ≤ –2 (calm market). • Medium otherwise. 3. Apply Hysteresis (if enabled): The state only flips after two consecutive bars register the same high/low/medium label. 4. Set Category Weights: • High Activity: Trend = 50 %, Momentum = 35 %, Price Action = 15 %. • Low Activity: Trend = 25 %, Momentum = 20 %, Price Action = 55 %. • Medium Activity: Use the trader’s base weight inputs (e.g., Trend = 40 %, Momentum = 30 %, Price Action = 30 % by default). D. Calculating the Net Score 5. Normalize Base Weights (so that the sum of Trend + Momentum + Price Action always equals 100 %). 6. Determine Current Weights based on the Market Activity State (High/Medium/Low). 7. Compute Each Category’s Contribution: Multiply (categoryScore) × (currentWeight). 8. Sum Contributions to get the raw netScore (a floating-point value that can exceed ±3 when scores are strong). 9. Smooth the netScore over two bars (if smoothing is enabled) to reduce noise. 10. Apply Hysteresis to the Final Zone: • If the smoothed netScore ≥ +2, the bar is classified as “Bullish.” • If the smoothed netScore ≤ –2, the bar is classified as “Bearish.” • Otherwise, it is “Sideways.” • To prevent rapid flips, the script requires two consecutive bars in the new zone before officially changing the displayed zone (if hysteresis is on). E. Thresholds for Zone Classification • BULLISH: netScore ≥ +2 • BEARISH: netScore ≤ –2 • SIDEWAYS: –2 < netScore < +2 --- 7. Role of Volatility (Market Activity State) in Scoring Volatility acts as a dynamic switch that shifts which category carries the most influence: 1. High Activity (Volatile): • Detected when at least two sub-scores out of BBW, ATR, KCW, and Volume equal +1. • The script sets Trend weight = 50 % and Momentum weight = 35 %. Price Action weight is minimized at 15 %. • Rationale: In volatile markets, strong trending moves and momentum surges dominate, so those signals are more reliable than nuanced candle patterns. 2. Low Activity (Calm): • Detected when at least two sub-scores out of BBW, ATR, KCW, and Volume equal –1. • The script sets Price Action weight = 55 %, Trend = 25 %, and Momentum = 20 %. • Rationale: In quiet, sideways markets, subtle price-action signals (breakouts, doji patterns, small-range candles) are often the best early indicators of a new move. 3. Medium Activity (Balanced): • Raw Score between –1 and +1 from the four volatility metrics. • Uses whatever base weights the trader has specified (e.g., Trend = 40 %, Momentum = 30 %, Price Action = 30 %). Because volatility can fluctuate rapidly, the script employs hysteresis on Market Activity State: a new High or Low state must occur on two consecutive bars before weights actually shift. This avoids constant back-and-forth weight changes and provides more stability. --- 8. Scoring Example (Hypothetical Scenario) • Symbol: Bitcoin on a 1-hour chart. • Market Activity: Raw volatility sub-scores show BBW (+1), ATR (+1), KCW (0), Volume (+1) → Total raw Score = +3 → High Activity. • Weights Selected: Trend = 50 %, Momentum = 35 %, Price Action = 15 %. • Trend Signals: • ADX strong and +DI > –DI → +1 • Fast MA above Slow MA → +1 • Ichimoku Senkou A > Senkou B → +1 → Trend Score = +3 • Momentum Signals: • RSI above upper bound → +1 • MACD histogram positive → +1 • Stochastic %K within neutral zone → 0 → Momentum Score = +2 • Price Action Signals: • Highest High/Lowest Low check yields 0 (close not near extremes) • Heikin-Ashi doji reading is neutral → 0 • Candle range slightly above upper bound but trend is strong, so → +1 → Price Action Score = +1 • Compute Net Score (before smoothing): • Trend contribution = 3 × 0.50 = 1.50 • Momentum contribution = 2 × 0.35 = 0.70 • Price Action contribution = 1 × 0.15 = 0.15 • Raw netScore = 1.50 + 0.70 + 0.15 = 2.35 • Since 2.35 ≥ +2 and hysteresis is met, the final zone is “Bullish.” Although the netScore lands at 2.35 (Bullish), smoothing might bring it slightly below 2.00 on the first bar (e.g., 1.90), in which case the script would wait for a second consecutive reading above +2 before officially classifying the zone as Bullish (if hysteresis is enabled). --- 9. Correlation Between Categories The four categories—Trend Strength, Momentum, Price Action, and Market Activity—often reinforce or offset one another. The script takes advantage of these natural correlations: • Bullish Alignment: If ADX is strong and pointed upward, fast MA is above slow MA, and Ichimoku is positive, that usually coincides with RSI climbing above its upper bound and the MACD histogram turning positive. In such cases, both Trend and Momentum categories generate +1 or +2. Because the Market Activity State is likely High (given the accompanying volatility), Trend and Momentum weights are at their peak, so the netScore quickly crosses into Bullish territory. • Sideways/Consolidation: During a low-volatility, sideways phase, ADX may fall below its threshold, MAs may flatten, and RSI might hover in the neutral band. However, subtle price-action signals (like a small breakout candle or a Heikin-Ashi candle with a slight bias) can still produce a +1 in the Price Action category. If Market Activity is Low, Price Action’s weight (55 %) can carry enough influence—even if Trend and Momentum are neutral—to push the netScore out of “Sideways” into a mild bullish or bearish bias. • Opposing Signals: When Trend is bullish but Momentum turns negative (for example, price continues up but RSI rolls over), the two scores can partially cancel. Market Activity may remain Medium, in which case the netScore lingers near zero (Sideways). The trader can then wait for either a clearer momentum shift or a fresh price-action breakout before committing. By dynamically recognizing these correlations and adjusting weights, the indicator ensures that: • When Trend and Momentum align (and volatility supports it), the netScore leaps strongly into Bullish or Bearish. • When Trend is neutral but Price Action shows an early move in a low-volatility environment, Price Action’s extra weight in the Low Activity State can still produce actionable signals. --- 10. Market Activity State & Its Role (Detailed) The Market Activity State is not a direct category score—it is an overarching context setter for how heavily to trust Trend, Momentum, or Price Action. Here’s how it is derived and applied: 1. Calculate Four Volatility Sub-Scores: • BBW: Compare the current band width to its own moving average ± standard deviation. If BBW > (BBW_MA + stdev), assign +1 (high volatility); if BBW < (BBW_MA × 0.5), assign –1 (low volatility); else 0. • ATR: Compare ATR to its moving average ± standard deviation. A spike above the upper threshold is +1; a contraction below the lower threshold is –1; otherwise 0. • KCW: Same logic as ATR but around the KCW mean. • Volume: Compare current volume to its volume MA ± standard deviation. Above the upper threshold is +1; below the lower threshold is –1; else 0. 2. Sum Sub-Scores → Raw Market Activity Score: Range between –4 and +4. 3. Assign Market Activity State: • High Activity: Raw Score ≥ +2 (at least two volatility metrics are strongly spiking). • Low Activity: Raw Score ≤ –2 (at least two metrics signal unusually low volatility or thin volume). • Medium Activity: Raw Score is between –1 and +1 inclusive. 4. Hysteresis for Stability: • If hysteresis is enabled, a new state only takes hold after two consecutive bars confirm the same High, Medium, or Low label. • This prevents the Market Activity State from bouncing around when volatility is on the fence. 5. Set Category Weights Based on Activity State: • High Activity: Trend = 50 %, Momentum = 35 %, Price Action = 15 %. • Low Activity: Trend = 25 %, Momentum = 20 %, Price Action = 55 %. • Medium Activity: Use trader’s base weights (e.g., Trend = 40 %, Momentum = 30 %, Price Action = 30 %). 6. Impact on netScore: Because category scores (–3 to +3) multiply by these weights, High Activity amplifies the effect of strong Trend and Momentum scores; Low Activity amplifies the effect of Price Action. 7. Market Context Tooltip: The dashboard includes a tooltip summarizing the current state—e.g., “High activity, trend and momentum prioritized,” “Low activity, price action prioritized,” or “Balanced market, all categories considered.” --- 11. Category Weights: Base vs. Dynamic Traders begin by specifying base weights for Trend Strength, Momentum, and Price Action that sum to 100 %. These apply only when volatility is in the Medium band. Once volatility shifts: • High Volatility Overrides: • Trend jumps from its base (e.g., 40 %) to 50 %. • Momentum jumps from its base (e.g., 30 %) to 35 %. • Price Action is reduced to 15 %. Example: If base weights were Trend = 40 %, Momentum = 30 %, Price Action = 30 %, then in High Activity they become 50/35/15. A Trend score of +3 now contributes 3 × 0.50 = +1.50 to netScore; a Momentum +2 contributes 2 × 0.35 = +0.70. In total, Trend + Momentum can easily push netScore above the +2 threshold on its own. • Low Volatility Overrides: • Price Action leaps from its base (30 %) to 55 %. • Trend falls to 25 %, Momentum falls to 20 %. Why? When markets are quiet, subtle candle breakouts, doji patterns, and small-range expansions tend to foreshadow the next swing more effectively than raw trend readings. A Price Action score of +3 in this state contributes 3 × 0.55 = +1.65, which can carry the netScore toward +2—even if Trend and Momentum are neutral or only mildly positive. Because these weight shifts happen only after two consecutive bars confirm a High or Low state (if hysteresis is on), the indicator avoids constantly flipping its emphasis during borderline volatility phases. --- 12. Dominant Category Explained Within the dashboard, a label such as “Trend Dominant,” “Momentum Dominant,” or “Price Action Dominant” appears when one category’s absolute weighted contribution to netScore is the largest. Concretely: • Compute each category’s weighted contribution = (raw category score) × (current weight). • Compare the absolute values of those three contributions. • The category with the highest absolute value is flagged as Dominant for that bar. Why It Matters: • Momentum Dominant: Indicates that the combined force of RSI, Stochastic, and MACD (after weighting) is pushing netScore farther than either Trend or Price Action. In practice, it means that short-term sentiment and speed of change are the primary drivers right now, so traders should watch for continued momentum signals before committing to a trade. • Trend Dominant: Means ADX, MA slope, and Ichimoku (once weighted) outweigh the other categories. This suggests a strong directional move is in place; trend-following entries or confirming pullbacks are likely to succeed. • Price Action Dominant: Occurs when breakout/breakdown patterns, Heikin-Ashi candle readings, and range expansions (after weighting) are the most influential. This often happens in calmer markets, where subtle shifts in candle structure can foreshadow bigger moves. By explicitly calling out which category is carrying the most weight at any moment, the dashboard gives traders immediate insight into why the netScore is tilting toward bullish, bearish, or sideways. --- 13. Oscillator Plot: How to Read It The “Net Score” oscillator sits below the dashboard and visually displays the smoothed netScore as a line graph. Key features: 1. Value Range: In normal conditions it oscillates roughly between –3 and +3, but extreme confluences can push it outside that range. 2. Horizontal Threshold Lines: • +2 Line (Bullish threshold) • 0 Line (Neutral midline) • –2 Line (Bearish threshold) 3. Zone Coloring: • Green Background (Bullish Zone): When netScore ≥ +2. • Red Background (Bearish Zone): When netScore ≤ –2. • Gray Background (Sideways Zone): When –2 < netScore < +2. 4. Dynamic Line Color: • The plotted netScore line itself is colored green in a Bullish Zone, red in a Bearish Zone, or gray in a Sideways Zone, creating an immediate visual cue. Interpretation Tips: • Crossing Above +2: Signals a strong enough combined trend/momentum/price-action reading to classify as Bullish. Many traders wait for a clear crossing plus a confirmation candle before entering a long position. • Crossing Below –2: Indicates a strong Bearish signal. Traders may consider short or exit strategies. • Rising Slope, Even Below +2: If netScore climbs steadily from neutral toward +2, it demonstrates building bullish momentum. • Divergence: If price makes a higher high but the oscillator fails to reach a new high, it can warn of weakening momentum and a potential reversal. --- 14. Comments and Their Necessity Every sub-indicator (ADX, MA slope, Ichimoku, RSI, Stochastic, MACD, HH/LL, Heikin-Ashi, Candle Range, BBW, ATR, KCW, Volume) generates a short comment that appears in the detailed dashboard. Examples: • “Strong bullish trend” or “Strong bearish trend” for ADX/DMI • “Fast MA above slow MA” or “Fast MA below slow MA” for MA slope • “RSI above dynamic threshold” or “RSI below dynamic threshold” for RSI • “MACD histogram positive” or “MACD histogram negative” for MACD Hist • “Price near highs” or “Price near lows” for HH/LL checks • “Bullish Heikin Ashi” or “Bearish Heikin Ashi” for HA Doji scoring • “Large range, trend confirmed” or “Small range, trend contradicted” for Candle Range Additionally, the top-row comment for each category is: • Trend: “Highly Bullish,” “Highly Bearish,” or “Neutral Trend.” • Momentum: “Strong Momentum,” “Weak Momentum,” or “Neutral Momentum.” • Price Action: “Bullish Action,” “Bearish Action,” or “Neutral Action.” • Market Activity: “Volatile Market,” “Calm Market,” or “Stable Market.” Reasons for These Comments: • Transparency: Shows exactly how each sub-indicator contributed to its category score. • Education: Helps traders learn why a category is labeled bullish, bearish, or neutral, building intuition over time. • Customization: If, for example, the RSI comment says “RSI neutral” despite an impending trend shift, a trader might choose to adjust RSI length or thresholds. In the detailed dashboard, hovering over each comment cell also reveals a tooltip with additional context (e.g., “Fast MA above slow MA” or “Senkou A above Senkou B”), helping traders understand the precise rule behind that +1, 0, or –1 assignment. --- 15. Real-Life Example (Consolidated) • Instrument & Timeframe: Bitcoin (BTCUSD), 1-hour chart. • Current Market Activity: BBW and ATR both spike (+1 each), KCW is moderately high (+1), but volume is only neutral (0) → Raw Market Activity Score = +2 → State = High Activity (after two bars, if hysteresis is on). • Category Weights Applied: Trend = 50 %, Momentum = 35 %, Price Action = 15 %. • Trend Sub-Scores: 1. ADX = 25 (above threshold 20) with +DI > –DI → +1. 2. Fast MA (20-period) sits above Slow MA (50-period) → +1. 3. Ichimoku: Senkou A > Senkou B → +1. → Trend Score = +3. • Momentum Sub-Scores: 4. RSI = 75 (above its moving average +1 stdev) → +1. 5. MACD histogram = +0.15 → +1. 6. Stochastic %K = 50 (mid-range) → 0. → Momentum Score = +2. • Price Action Sub-Scores: 7. Price is not within 1 % of the 20-period high/low and slope = positive → 0. 8. Heikin-Ashi body is slightly larger than stdev over last 5 bars with haClose > haOpen → +1. 9. Candle range is just above its dynamic upper bound but trend is already captured, so → +1. → Price Action Score = +2. • Calculate netScore (before smoothing): • Trend contribution = 3 × 0.50 = 1.50 • Momentum contribution = 2 × 0.35 = 0.70 • Price Action contribution = 2 × 0.15 = 0.30 • Raw netScore = 1.50 + 0.70 + 0.30 = 2.50 → Immediately classified as Bullish. • Oscillator & Dashboard Output: • The oscillator line crosses above +2 and turns green. • Dashboard displays: • Trend Regime “BULLISH,” Trend Score = 3, Comment = “Highly Bullish.” • Momentum Regime “BULLISH,” Momentum Score = 2, Comment = “Strong Momentum.” • Price Action Regime “BULLISH,” Price Action Score = 2, Comment = “Bullish Action.” • Market Activity State “High,” Comment = “Volatile Market.” • Weights: Trend 50 %, Momentum 35 %, Price Action 15 %. • Dominant Category: Trend (because 1.50 > 0.70 > 0.30). • Overall Score: 2.50, posCount = (three +1s in Trend) + (two +1s in Momentum) + (two +1s in Price Action) = 7 bullish signals, negCount = 0. • Final Zone = “BULLISH.” • The trader sees that both Trend and Momentum are reinforcing each other under high volatility. They might wait one more candle for confirmation but already have strong evidence to consider a long. --- • . --- Disclaimer This indicator is strictly a technical analysis tool and does not constitute financial advice. All trading involves risk, including potential loss of capital. Past performance is not indicative of future results. Traders should: • Always backtest the “Market Zone Analyzer ” on their chosen symbols and timeframes before committing real capital. • Combine this tool with sound risk management, position sizing, and, if possible, fundamental analysis. • Understand that no indicator is foolproof; always be prepared for unexpected market moves. Goodluck -BullByte! ---
Pine Script®指標
由BullByte提供
2
Psychological Levels + Buffer ZonesThis indicator automatically draws major (100-pip) and minor (50-pip) psychological levels on your Forex chart, along with optional buffer zones for smarter trade entries. Zones help you visually capture breakouts, retests, and fakeouts. Includes: Major & minor psych levels Adjustable buffer zones (±0.1%, etc.) Customizable zone color & transparency Optional ATR trailing lines for trend confirmation Perfect for scalpers, breakout traders, and zone-based strategies.
Pine Script®指標
由quiendum提供
📊 Trend Table (EMA20/50) PROThis script displays a color-coded trend dashboard based on the relationship between the EMA 20 and EMA 50 moving averages across multiple timeframes: 🕐 1m, 5m, 15m, 1h, 4h. 📌 Features: ✅ Green = Bullish Trend (EMA20 > EMA50) ✅ Red = Bearish Trend (EMA20 < EMA50) 🎨 Fully customizable text and background color 📍 Selectable table position (left / center / right, top / bottom) 🔁 Auto-refreshes every few bars for real-time accuracy 📈 Use Case: Perfect as a multi-timeframe trend dashboard for scalpers and swing traders – ideal for XAUUSD, US30, NAS100 and more. Helps you instantly assess trend alignment across key timeframes.
Pine Script®指標
由intensegraphicdesigner提供
DB - Range Filter heikenashi Strategy DB - Range Filter Heikenashi Strategy Smart Filtering Meets Heiken-Ashi Precision for Adaptive Trend Breakouts This is not your average range filter strategy. Built from the ground up with adaptive signal logic and hybrid candle interpretation, this script merges range-based volatility filtering with Heiken-Ashi smoothing to isolate meaningful breakouts—while filtering out noise with surgical precision. 🔍 Key Innovations: • Dynamic Range Filtering Engine: Combines smoothed average range with directional bias to create high-confidence entries. • Candle Type Toggle: Choose between standard candles or Heiken-Ashi to shape your signals to your trading style. • Dual-Layer Trend Confirmation: Upward and downward movement counters ensure trend commitment before triggering entries. • Time-Filtered Backtesting: Easily isolate strategy performance within precise historical windows. • Optional Smart Stops: Add stop loss & take profit rules without changing the core logic—perfect for risk-managed deployment. 📈 Visual & Practical Features: • Multi-color bar analysis to identify strength, weakness, and transition zones. • Upper and lower dynamic bands for visualizing profit targets and range boundaries. • Buy/Sell signal labels with direction-aware logic to avoid choppy conditions. • Ideal for high-volatility assets (e.g., BTC) on short timeframes, but fully tunable for any market. Built for traders who value clarity over chaos, this strategy aims to reduce false signals and offer a cleaner execution framework for trend followers and breakout scalpers alike. > Make volatility your ally, not your enemy.
Pine Script®策略
由DefiBanked提供
1
RSI-Adaptive T3 [ChartPrime]The RSI-Adaptive T3 is a precision trend-following tool built around the legendary T3 smoothing algorithm developed by Tim Tillson , designed to enhance responsiveness while reducing lag compared to traditional moving averages. Current implementation takes it a step further by dynamically adapting the smoothing length based on real-time RSI conditions — allowing the T3 to “breathe” with market volatility. This dynamic length makes the curve faster in trending moves and smoother during consolidations. To help traders visualize volatility and directional momentum, adaptive volatility bands are plotted around the T3 line, with visual crossover markers and a dynamic info panel on the chart. It’s ideal for identifying trend shifts, spotting momentum surges, and adapting strategy execution to the pace of the market. HOIW IT WORKS At its core, this indicator fuses two ideas: The T3 Moving Average — a 6-stage recursively smoothed exponential average created by Tim Tillson , designed to reduce lag without sacrificing smoothness. It uses a volume factor to control curvature. A Dynamic Length Engine — powered by the RSI. When RSI is low (market oversold), the T3 becomes shorter and more reactive. When RSI is high (overbought), the T3 becomes longer and smoother. This creates a feedback loop between price momentum and trend sensitivity. // Step 1: Adaptive length via RSI rsi = ta.rsi(src, rsiLen) rsi_scale = 1 - rsi / 100 len = math.round(minLen + (maxLen - minLen) * rsi_scale) pine_ema(src, length) => alpha = 2 / (length + 1) sum = 0.0 sum := na(sum ) ? src : alpha * src + (1 - alpha) * nz(sum ) sum // Step 2: T3 with adaptive length e1 = pine_ema(src, len) e2 = pine_ema(e1, len) e3 = pine_ema(e2, len) e4 = pine_ema(e3, len) e5 = pine_ema(e4, len) e6 = pine_ema(e5, len) c1 = -v * v * v c2 = 3 * v * v + 3 * v * v * v c3 = -6 * v * v - 3 * v - 3 * v * v * v c4 = 1 + 3 * v + v * v * v + 3 * v * v t3 = c1 * e6 + c2 * e5 + c3 * e4 + c4 * e3 The result: an evolving trend line that adapts to market tempo in real-time. KEY FEATURES ⯁ RSI-Based Adaptive Smoothing The length of the T3 calculation dynamically adjusts between a Min Length and Max Length , based on the current RSI. When RSI is low → the T3 shortens, tracking reversals faster. When RSI is high → the T3 stretches, filtering out noise during euphoria phases. Displayed length is shown in a floating table, colored on a gradient between min/max values. ⯁ T3 Calculation (Tim Tillson Method) The script uses a 6-stage EMA cascade with a customizable Volume Factor (v) , as designed by Tillson (1998) . Formula: T3 = c1 * e6 + c2 * e5 + c3 * e4 + c4 * e3 This technique gives smoother yet faster curves than EMAs or DEMA/Triple EMA. ⯁ Visual Trend Direction & Transitions The T3 line changes color dynamically: Color Up (default: blue) → bullish curvature Color Down (default: orange) → bearish curvature Plot fill between T3 and delayed T3 creates a gradient ribbon to show momentum expansion/contraction. Directional shift markers (“🞛”) are plotted when T3 crosses its own delayed value — helping traders spot trend flips or pullback entries. ⯁ Adaptive Volatility Bands Optional upper/lower bands are plotted around the T3 line using a user-defined volatility window (default: 100). Bands widen when volatility rises, and contract during compression — similar to Bollinger logic but centered on the adaptive T3. Shaded band zones help frame breakout setups or mean-reversion zones. ⯁ Dynamic Info Table A live stats panel shows: Current adaptive length Maximum smoothing (▲ MaxLen) Minimum smoothing (▼ MinLen) All values update in real time and are color-coded to match trend direction. HOW TO USE Use T3 crossovers to detect trend transitions, especially during periods of volatility compression. Watch for volatility contraction in the bands — breakouts from narrow band periods often precede trend bursts. The adaptive smoothing length can also be used to assess current market tempo — tighter = faster; wider = slower. CONCLUSION RSI-Adaptive T3 modernizes one of the most elegant smoothing algorithms in technical analysis with intelligent RSI responsiveness and built-in volatility bands. It gives traders a cleaner read on trend health, directional shifts, and expansion dynamics — all in a visually efficient package. Perfect for scalpers, swing traders, and algorithmic modelers alike, it delivers advanced logic in a plug-and-play format.
Pine Script®指標
由ChartPrime提供
7
Volume Spike Alert & Overlay"Volume Spike Alert & Overlay" highlights unusually high trading volume on a chart. It calculates whether the current volume exceeds a user-defined percentage above the historical average and triggers an alert if it does. The information is also displayed in a customizable on-screen table. What It Does Monitors volume for each bar and compares it to an average over a user-defined lookback period. Supports multiple smoothing methods (SMA, EMA, WMA, RMA) for calculating the average volume. Triggers an alert when current volume exceeds the threshold percentage above the average. Displays a table on the chart with: Current Volume Average Volume Threshold Percentage Optional empty row for spacing/formatting How It Works User Inputs: lookbackPeriods: Number of bars used to calculate the average volume. thresholdPercent: % above the average that triggers a volume spike alert. smoothingType: Type of moving average used for volume calculation. textColor, bgColor: Formatting for the display table. tablePositionInput: Where the table appears on the chart (e.g., Bottom Right). Toggles for showing/hiding parts of the table. Volume Calculations: Calculates current bar's volume. Calculates average volume using the selected smoothing method. Computes the threshold: avgVol * (1 + thresholdPercent / 100). Compares current volume to threshold. Table Display: Dynamically creates a table with volume stats. Adds rows based on user preferences. Alerts: alertcondition fires when currentVol crosses above the calculated threshold. Message: "Volume Threshold Exceeded" Usage Examples Example 1: Spotting High Activity Apply the script to a stock like AAPL on a 5-minute chart. Set lookbackPeriods to 20 and thresholdPercent to 30. Use EMA for more reactive volume tracking. When volume spikes more than 30% above the 20-period EMA, an alert triggers. Example 2: Day Trading Filter For scalpers, apply it to a 1-minute crypto chart (e.g., BTC/USDT). Set thresholdPercent to 50 to catch only strong surges. Position the table at the top left and reduce visible info for a clean layout. Example 3: Long-Term Context On a daily chart, use SMA and set lookbackPeriods to 50. Helps identify breakout moves supported by strong volume. How this is different from Trading View's Volume indicator: The standard volume plot from trading view allows users to set a alert when the average line is crossed, but it does not allow you to set a custom percentage at which to trigger an alert. This indicator will allow you to set any percentage you wish to monitor and above that percentage threshold will trigger your alert. ===== ORIGINAL DESCRIPTION ===== Volume Spike Alert & Overlay This indicator will display the following as an overlay on your chart: Current volume Average Volume Threshold for Alert Description: This indicator will display the current bar volume based on the chart time frame, display the average volume based on selected conditions, allow user selectable threshold over the average volume to trigger an alert. Options: Average lookback period Smoothing type Alert Threshold % Enable / Disable Each Value Change Text Color Change Background Color Change Table location Add/Remove extra row for placement in top corner Usage Example: I use this indicator to alert when the current volume exceeds the average volume by a specified percentage to alert to volume spikes. Set the threshold to 25% in the settings Create an alert by clicking on the 3 dots on the right of the indicator title on the chart When the threshold is exceeded the alert will trigger
Pine Script®指標
由abbadon9提供
BB Cross + Martingale Hedging Strategy🔁 Buy and Sell Trend Indicator (Multi-Entry Trend Follower) This indicator detects bullish and bearish trends based on candle direction and highlights trend shifts with multiple entry opportunities. 🔍 Features: Buy Signals: Triggered when a bullish candle follows a bearish one, initiating a potential upward trend. Sell Signals: Triggered when a bearish candle follows a bullish one, signaling potential downward momentum. Multi-Entry Logic: Captures up to 5 consecutive entries in the same trend to compound positions or confirm strength. Visual Labels: Clearly marked buy/sell labels and trend continuation counts on the chart. Color-coded Backgrounds: Light green/red highlights for bullish/bearish candles. Alerts: Set real-time alerts for trend reversals and continuation signals, ensuring you're notified instantly. 🧠 Ideal For: Trend-following traders looking for clear entry points. Scalpers and swing traders who want to track momentum shifts. Users who prefer visual confirmations and real-time alerts.
Pine Script®策略
由AnthonyCooke42069提供
1
Commodity Trend Reactor [BigBeluga] 🔵 OVERVIEW A dynamic trend-following oscillator built around the classic CCI, enhanced with intelligent price tracking and reversal signals. Commodity Trend Reactor extends the traditional Commodity Channel Index (CCI) by integrating trend-trailing logic and reactive reversal markers. It visualizes trend direction using a trailing stop system and highlights potential exhaustion zones when CCI exceeds extreme thresholds. This dual-level system makes it ideal for both trend confirmation and mean-reversion alerts. 🔵 CONCEPTS Based on the CCI (Commodity Channel Index) oscillator, which measures deviation from the average price. Trend bias is determined by whether CCI is above or below user-defined thresholds. Trailing price bands are used to lock in trend direction visually on the main chart. Extreme values beyond ±200 are treated as potential reversal zones. 🔵 FEATURES\ CCI-Based Trend Shifts: Triggers a bullish bias when CCI crosses above the upper threshold, and bearish when it crosses below the lower threshold. Adaptive Trailing Stops: In bullish mode, a trailing stop tracks the lowest price; in bearish mode, it tracks the highest. Top & Bottom Markers: When CCI surpasses +200 or drops below -200, it plots colored squares both on the oscillator and on price, marking potential reversal zones. Background Highlights: Each time a trend shift occurs, the background is softly colored (lime for bullish, orange for bearish) to highlight the change. 🔵 HOW TO USE Use the oscillator to monitor when CCI crosses above or below threshold values to detect trend activation. Enter trades in the direction of the trailing band once the trend bias is confirmed. Watch for +200 and -200 square markers as warnings of potential mean reversals. Use trailing stop areas as dynamic support/resistance to manage stop loss and exit strategies. The background color changes offer clean confirmation of trend transitions on chart. 🔵 CONCLUSION Commodity Trend Reactor transforms the simple CCI into a complete trend-reactive framework. With real-time trailing logic and clear reversal alerts, it serves both momentum traders and contrarian scalpers alike. Whether you’re trading breakouts or anticipating mean reversions, this indicator provides clarity and structure to your decision-making.
Pine Script®指標
由BigBeluga提供
26
Last Week's APM FX pairs only📖 Description: This script is designed for precision-focused forex traders who understand the power of volatility measurement. It calculates the Average Price Movement (APM) from the previous week by measuring the full wick-to-wick range (high to low) of each daily candle from Monday to Friday, then averaging them across the five sessions. 🔍 Core Features: ✅ Accurate APM Calculation: Pulls daily high-low ranges from last week using locked daily timeframe data, ensuring stable and reliable pip range measurements across all chart timeframes. ✅ Auto-Adjusts for Pip Precision: Detects whether the pair is JPY-based or not, and automatically adjusts the pip multiplier (100 for JPY pairs, 10,000 for all others) to give true pip values. ✅ Visual Display in Clean UI: The calculated APM is displayed in a non-intrusive, fixed-position table in the top-right corner of the chart — making it ideal for traders who want continuous awareness of recent market behavior without visual clutter. ✅ Timeless on Any Timeframe: Whether you’re on the 1-minute chart or the daily, the script remains anchored and accurate because it sources raw data from the daily chart internally. 📈 How It Helps Your Trading: 🧠 Volatility Awareness: Know how much a pair typically moves per day based on recent historical behavior — great for range analysis, target setting, or session biasing. 📊 Week-to-Week Comparison: Use it as a benchmark to compare current volatility to last week’s. Great for identifying if the market is expanding, contracting, or stabilizing. 🔗 Perfect for Confluence: APM can serve as a supporting metric when combined with order blocks, liquidity zones, news catalysts, or other volatility-based tools like ATR. 🛠️ Ideal For: Professional and prop firm traders Institutional model traders (ICT-style or SMC) Volatility scalpers and range-based intraday traders Anyone building a rules-based trading system with data-driven logic 🔐 Clean. Reliable. Focused. If you value structure, volatility awareness, and pip precision — this tool belongs in your chart workspace.
Pine Script®指標
由delorean369提供