立即開始

在腳本中搜尋"机械革命无界15+时不时闪屏"

Fractal Resonance BarLazyBear's WaveTrend port has been praised for highlighting trend reversals with precision and punctuality (minimal lag). But strong "3rd Wave" trends can "embed" or saturate any oscillator flashing several premature crosses while stuck overbought/oversold. This happens when the trend stretches over a longer timescale than the oscillator's averaging window or filter time constant. Our solution: monitor many timescales. With Fractal Resonance Bar's rich color codings, strong wavefronts form across timescales and jump out like an approaching line of thunderclouds! Fractal Resonance Bar color-codes the status of eight underlying stochastic oscillators, with each row averaging over twice the time of the row above. Fractal Resonance Bar shifts its timescales along with your choice of main chart timescale: 1 minute chart: 1 minute through 128 minute (~2 hour) oscillators. 15 minute chart: 15 minute through 1920 minute (~32 hour) oscillators. 1 hour chart: 1 hour through 128 hour (~2 week) oscillators. Daily chart: 1 day through 128 day (~4 month) oscillators. The color map is configured as follows: Hot Pink: Extreme Overbought (> 100%) rolled over to sell, but oscillators probably embedded with more upside (revert to Dark Green) possible after a pause. Deep Red: Overbought (> 75%) crossover ripe for selling (validated when red spreads to timescales below). Brown: Minor (< 75%) crossover sell from which could bounce back green or start a plunge toward gray/black. Gray/Black: Mature (< -75%) sells turning full black in a plunge before the dawn. Lime Green: Extreme Oversold (< -100%) and bouncing, though may yet bottom even lower. Green: Oversold (< -75%) crossover ripe for buy. Green spreading to all timescales below will validate bottom is in. Dark Green/Teal: Mature buy in overbought (> 75%) range, waiting for sell crossover to Hot Pink for a pause or correction. White Stripes are Impulsive Trend Warning Fractal Resonance Bar warns of oscillator embedding by showing white stripes when it detects strong, early surges in the timescale rows below.The white stripes usually accompany Hot Pink warning it's too early to go short, or Lime Green warning it's too early to go long. Heeding these warnings will probably miss the exact top or bottom, but you're less likely to get overrun in a momentum move. Usually the market gives us a second opportunity to short very close to the top or buy very close to the bottom after the warning white stripes have subsided. NOTE: Recently rolled over Futures contracts may not have enough history for all oscillator calculations, in which case no bar colors will appear. Tweakable Attributes The default Channel Length, Stochastic Ratio Length and Lag Length work reasonably well on all timescales in our experience. Minor tweaks don't hurt but this may just overfit to a particular chart history. We don't recommend changing the 75% Overbought and 100% Extreme Overbought default levels as these are ideal numbers relative to the underlying oscillator statistic calculations. But these settings can shift the color transition levels. Embedded attribute controls the sensitivity/conservativeness of the white strip embedding detectors. Closer to 75 increases the warning sensitivity while closer to 100 decreases the aggressiveness of blocking white stripes. Embed Separation also affects the white stripe sensitivity. Row width increases each row's thickness to fill the available screen height you've afforded the bar.
Pine Script®指標
由pythagoras提供
12
extended session - Regular Opening-Range- JayyOpening Range and some other scripts updated to plot correctly (see comments below.) There are three variations of the fibonacci expansion beyond the opening range and retracements within the opening range of the US Market session - I have not put in the script for the other markets yet. The three scripts have different uses and strengths: The extended session script (with the script here below) will plot the opening range whether you are using the extended session or the regular session. (that is to say whether "ext" in the lower right hand corner is highlighted or not.). While in the extended session the opening range has some plotting issues with periods like 13 minutes or any period that is not divisible into 330 mins with a round number outcome (eg 330/60 =5.5. Therefore an hour long opening range has problems in the extended session. The pre session script is only for the premarket. You can select any opening range period you like. I have set the opening range to be the full premarket session. If you select a different session you will have to unselect "pre open to 9:30 EST for Opening Range?" in the format section. The script defaults to 15 minutes in the "period Of Pre Opening Range?". To go back to the 4 am to 9:30 pre opening range select "pre open to 9:30 EST for Opening Range?" there is no automatic 330 minute selection. The past days offset script only works in 5 min or 15 minute period. It will show the opening range from up to 20 days past over the current days price action. Use this for the regular session only. 0 shows the current day's opening range. Use the positive integers for number of days back ie 1, 2, 3 etc not -1, -2, -3 etc. The script is preprogrammed to use the current day (0). Scripts updated to plot correctly: One thing they all have in common is a way of they deal with a somewhat random problem that shifts the plots 4 hours in one direction or the other ie the plot started at 9:30 EST or 1:30PM EST. This issue started to occur approximately June 22, 2015 and impacts any script that tried to use "session" times to manage a plot in my scripts. The issue now seems to have been resolved during this past week. Just in case the problem reoccurs I have added a "Switch session plot?" to each script. If the plot looks funny check or uncheck the "Switch session plot?" and see the difference. Of course if a new issue crops up it will likely require a different fix. I have updated all of the scripts shown on this chart. If you are using a script of mine that suffers from the compiler issue then you will find an update on this chart. You can get any and all of the scripts by clicking on the small sideways wishbone on the left middle of the chart. You will see a dialogue box. Then click "make it mine". This will import all of the scripts to your computer and you can play around with them all to decide what you want and what you don't want. This is the easiest way to get all of the scripts in one fell swoop. It is also the easiest way for me to make all of the scripts available. I do not have all of the plots visible since it is too messy and one of the scripts (pre OR) is only for the regular session. To view the scripts click on the blue eye to the right of the script title to show it on this script. If you can only use the regular session. The scripts will all (with the exception of the pre OR) work fine. If for any reason this script seems flakey refresh the page r try a slightly different period. I have noticed that sometimes randomly the script loves to return to the 5 min OR. This is a very new issue transient issue. As always if you see an issue please let me know. Cheers Jayy
Pine Script®指標
由jayy提供
1
BB 100 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 25 with Barcolors".
Pine Script®指標
由rmwaddelljr提供
BB 25 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 100 with Barcolors".
Pine Script®指標
由rmwaddelljr提供
1
KK_Intraday MAsHey guys, today I was browsing through intraday Charts looking at some moving averages. Basically what I wanted to see was whether the currency pair was trading below or above the moving average of the day/week/month. For a better understanding: The daily MA on a 15 minute Forex Chart would be the 96 MA. I encountered the problem that i always had to change the settings for my MAs when changing the Time Interval, so I coded this here up. It is pretty simple but maybe somebody else has the same problem and can put it to use. The script has some settings as listed below: Choice which MAs to plot, (Daily, Weekly, Monthly) Choice which type of MA to use (Simple, Exponential, Weighted) Neccesary Settings for the correct calculation (e.g. Number of trading hours per day). These settings depend on the instrument you are using and should always be checked before using this script. There are a few things to Note when using this script: This script works for intraday charts only. The monthly MA doesn't work on any Time Interval smaller than 15 minutes. Can't do anything about it unfortunately. This is my first published Script, use it with caution and let me know what you think about it!
Pine Script®指標
由Kurbelklaus提供
2
Opening Range Breakout with 2 Profit Targets.Opening Range Breakout with 2 Profit Targets. Updated Indicator now works on all Symbols with Many Different Session Options. ***Known PineScript Issue…While the Opening Range is being Formed the lines only adjust for that individual bar. Just reset Indicator after Opening Range Completes. ***All Times are Based on New York Time Session Options Forex U.S. Banks Open (8:00), Gold U.S. Open (8:20), Oil U.S. Open (9:00), U.S. Cash Session - Stocks (9:30), NY Forex Open (17:00) , Europe Open (02:00), or if you choose Setting 0 the Session Runs from 00:00 to 00:00 (Midnight to Midnight). ***Ability to use 60 minute Opening Range, 30 minute, 15 minute, and many other options. ***However you can manually change the times in the Inputs Tab to adjust for any session you prefer. This is useful for Day Light Savings Adjustments. Also the default times work if your charts are set to EST Time. If you use A different time zone in your settings you need to Adjust the times in the inputs tab. Initially Opening Range High and Low plot as Yellow Lines. If Price Goes Above Opening Range then Line Turns Green. If Price Goes Below Opening Range Line Turns Red. By default the First Profit Target is 1/2 the Width of the Opening Range and the 2nd Profit Target is 1 Times the Opening Range. However these are Adjustable in the Inputs Tab. By Default the Opening Range Length is 1 Hour. However, you can Change the Opening Range Length to 15 min, 30 min, 2 hours etc. in the Inputs Tab. Plots a 1 Above or Below Candle when 1st Profit Target is Achieved, and a 2 when 2nd Profit Target is Achieved.
Pine Script®指標
由ChrisMoody提供
91
Indicator: Trend Trigger FactorIntroduced by M.H.Pee, Trend Trigger Factor is designed to keep the trader trading with the trend. System rules according to the developer: * If the 15-day TTF is above 100 (indicating an uptrend), you will want to be in long positions. * If the 15-day TTF is below -100, you will want to be short. * If it is between -100 and 100, you should remain with the current position. More info: Original Article by Mr.Pee: drive.google.com
Pine Script®指標
由LazyBear提供
15
EMA(9) / SMMA(14) Crossover Alert with time blocksThis Pine Script v6 code is a Moving Average Crossover Alert Indicator that generates trading signals and alerts only within a specified time window. It uses a faster Exponential Moving Average (EMA) and a slower Smoothed Moving Average (SMMA) to identify potential shifts in market momentum. Key Features and Logic 1. Moving Average Calculations The indicator plots two moving averages (MAs) on the chart: Fast MA (EMA 9): An Exponential Moving Average (EMA) with a default length of 9 periods. The EMA reacts more quickly to price changes. Slow MA (SMMA 14): A Smoothed Moving Average (SMMA) with a default length of 14 periods. The SMMA (calculated using ta.rma in Pine v6) smooths price data more than a standard Simple Moving Average. The user can customize both the EMA Length and SMMA Length via the indicator settings. 2. Time Window Restriction ⏰ The script incorporates a critical time filter to restrict all signals and alerts to a specific daily trading session. Time Session: The alerts are restricted to the time between 6:30 AM CST and 2:30 PM CST. Implementation: This is achieved by converting the Central Time (CST) range to 7:30-15:30 (EST) and applying the time() function with the "GMT-5" timezone (which covers EST/EDT). The boolean variable time_in_range is only true when the current bar falls within this time window. 3. Crossover Signals The code defines two primary crossover events, which represent the trading signals: Bullish Cross (Cross Up): The EMA 9 (blue line) crosses above the SMMA 14 (red line), indicating bullish momentum. Bearish Cross (Cross Down): The EMA 9 (blue line) crosses below the SMMA 14 (red line), indicating bearish momentum. 4. Visuals and Alerts Plots: Both the EMA 9 (blue) and SMMA 14 (red) lines are plotted directly on the price chart (overlay=true). Visual Highlights: Small plotshapes are drawn on the chart only when a crossover occurs and the time is within the specified time_in_range window: Green Triangle Up: for a Bullish Cross. Red Triangle Down: for a Bearish Cross. Alerts: Two separate alertcondition calls are configured to trigger external notifications. Crucially, the alerts will only fire if both the crossover condition AND the time_in_range condition are met. The alerts include dynamic placeholders for the ticker, interval, and closing price.
Pine Script®指標
由mattkelly914提供
Multi-Timeframe EMA (5 Configurable)Here's a comprehensive description you can use for your indicator: Multi-Timeframe EMA Indicator (5 Configurable Slots) Description This indicator displays up to 5 Exponential Moving Averages (EMAs) from different timeframes simultaneously on a single chart. Perfect for multi-timeframe analysis, it allows traders to visualize key EMAs from intraday to higher timeframes without switching charts. Key Features 5 Independent EMA Slots: Each slot can be configured with its own timeframe, EMA length, and color Flexible Configuration: Mix any timeframes and EMA lengths (e.g., 1m EMA 50, 15m EMA 200, 4h EMA 100) Smart Label Formatting: Automatically displays timeframes in readable format (minutes, hours, or days) Optional Data Table: Toggle a compact table showing EMA values and price distance percentages Individual Toggle Controls: Enable/disable each EMA independently without losing settings Customizable Styling: Adjust colors and line width to match your chart theme Default Configuration EMA 1: 1-minute timeframe, EMA 200 (Red) EMA 2: 5-minute timeframe, EMA 200 (Purple) EMA 3: 15-minute timeframe, EMA 200 (Yellow) EMA 4: 1-hour timeframe, EMA 200 (Blue) EMA 5: 4-hour timeframe, EMA 200 (Orange) How to Use Add the indicator to any chart Configure each EMA slot in the settings: Timeframe: Choose from 1m, 5m, 15m, 1h, 4h, D, W, M, or custom Length: Set the EMA period (default 200) Color: Select a color for easy identification Enable "Show Line Labels" to see EMA identifiers on the right side Enable "Show Values Table" for a detailed view of current values and distances Use Cases Trend Analysis: Identify alignment across multiple timeframes Support/Resistance: Use higher timeframe EMAs as dynamic S/R levels Entry/Exit Timing: Enter on lower timeframe signals near higher timeframe EMAs Multi-Timeframe Confirmation: Validate setups when price is above/below key EMAs Scalping: Monitor 1m/5m EMAs while respecting 1h/4h trend direction Tips All EMAs update in real-time and move with the chart Use contrasting colors for easier visual distinction Disable unused slots to declutter your chart The table shows percentage distance from current price to each EMA Works on any symbol and any chart timeframe
Pine Script®指標
由gbelenguer提供
Smart MACD Volume Trader# Smart MACD Volume Trader ## Overview Smart MACD Volume Trader is an enhanced momentum indicator that combines the classic MACD (Moving Average Convergence Divergence) oscillator with an intelligent high-volume filter. This combination significantly reduces false signals by ensuring that trading signals are only generated when price momentum is confirmed by substantial volume activity. The indicator supports over 24 different instruments including major and exotic forex pairs, precious metals (gold and silver), energy commodities (crude oil, natural gas), and industrial metals (copper). For forex and commodity traders, the indicator automatically maps to CME and COMEX futures contracts to provide accurate institutional-grade volume data. ## Originality and Core Concept Traditional MACD indicators generate signals based solely on price momentum, which can result in numerous false signals during low-activity periods or ranging markets. This indicator addresses this critical weakness by introducing a volume confirmation layer with automatic institutional volume integration. **What makes this approach original:** - Signals are triggered only when MACD crossovers coincide with elevated volume activity - Implements a lookback mechanism to detect volume spikes within recent bars - Automatically detects and maps 24+ forex pairs and commodities to their corresponding CME and COMEX futures contracts - Provides real institutional volume data for forex pairs where spot volume is unreliable - Combines two independent market dimensions (price momentum and volume) into a single, actionable signal - Includes intelligent asset detection that works across multiple exchanges and ticker formats **The underlying principle:** Volume validates price movement. When institutional money enters the market, it creates volume signatures. By requiring high volume confirmation and using actual institutional volume data from futures markets, this indicator filters out weak price movements and focuses on trades backed by genuine market participation. The automatic futures mapping ensures that forex and commodity traders always have access to the most accurate volume data available, without manual configuration. ## How It Works ### MACD Component The indicator calculates MACD using standard methodology: 1. **Fast EMA (default: 12 periods)** - Tracks short-term price momentum 2. **Slow EMA (default: 26 periods)** - Tracks longer-term price momentum 3. **MACD Line** - Difference between Fast EMA and Slow EMA 4. **Signal Line (default: 9-period SMA)** - Smoothed average of MACD line **Crossover signals:** - **Bullish:** MACD line crosses above Signal line (momentum turning positive) - **Bearish:** MACD line crosses below Signal line (momentum turning negative) ### Volume Filter Component The volume filter adds an essential confirmation layer: 1. **Volume Moving Average** - Calculates exponential MA of volume (default: 20 periods) 2. **High Volume Threshold** - Multiplies MA by ratio (default: 2.0x or 200%) 3. **Volume Detection** - Identifies bars where current volume exceeds threshold 4. **Lookback Period** - Checks if high volume occurred in recent bars (default: 5 bars) **Signal logic:** - Buy/Sell signals only trigger when BOTH conditions are met: - MACD crossover/crossunder occurs - High volume detected within lookback period ### Automatic CME Futures Integration For forex traders, spot FX volume data can be unreliable or non-existent. This indicator solves this problem by automatically detecting forex pairs and mapping them to corresponding CME futures contracts with real institutional volume data. **Supported Major Forex Pairs (7):** - EURUSD → CME:6E1! (Euro FX Futures) - GBPUSD → CME:6B1! (British Pound Futures) - AUDUSD → CME:6A1! (Australian Dollar Futures) - USDJPY → CME:6J1! (Japanese Yen Futures) - USDCAD → CME:6C1! (Canadian Dollar Futures) - USDCHF → CME:6S1! (Swiss Franc Futures) - NZDUSD → CME:6N1! (New Zealand Dollar Futures) **Supported Exotic Forex Pairs (4):** - USDMXN → CME:6M1! (Mexican Peso Futures) - USDRUB → CME:6R1! (Russian Ruble Futures) - USDBRL → CME:6L1! (Brazilian Real Futures) - USDZAR → CME:6Z1! (South African Rand Futures) **Supported Cross Pairs (6):** - EURJPY → CME:6E1! (Uses Euro Futures) - GBPJPY → CME:6B1! (Uses British Pound Futures) - EURGBP → CME:6E1! (Uses Euro Futures) - AUDJPY → CME:6A1! (Uses Australian Dollar Futures) - EURAUD → CME:6E1! (Uses Euro Futures) - GBPAUD → CME:6B1! (Uses British Pound Futures) **Supported Precious Metals (2):** - Gold (XAUUSD, GOLD) → COMEX:GC1! (Gold Futures) - Silver (XAGUSD, SILVER) → COMEX:SI1! (Silver Futures) **Supported Energy Commodities (3):** - WTI Crude Oil (USOIL, WTIUSD) → NYMEX:CL1! (Crude Oil Futures) - Brent Oil (UKOIL) → NYMEX:BZ1! (Brent Crude Futures) - Natural Gas (NATGAS) → NYMEX:NG1! (Natural Gas Futures) **Supported Industrial Metals (1):** - Copper (COPPER) → COMEX:HG1! (Copper Futures) **How the automatic detection works:** The indicator intelligently identifies the asset type by analyzing: 1. Exchange name (FX, OANDA, TVC, COMEX, NYMEX, etc.) 2. Currency pair pattern (6-letter codes like EURUSD, GBPUSD) 3. Commodity identifiers (XAU for gold, XAG for silver, OIL for crude) When a supported instrument is detected, the indicator automatically switches to the corresponding futures contract for volume analysis. For stocks, cryptocurrencies, and other assets, the indicator uses the native volume data from the current chart. **Visual feedback:** An information table appears in the top-right corner of the MACD pane showing: - Current chart symbol - Exchange name - Currency pair or asset name - Volume source being used (highlighted in orange for futures, yellow for native volume) - Current high volume status This provides complete transparency about which data source the indicator is using for its volume analysis. ## How to Use ### Basic Setup 1. Add the indicator to your chart 2. The indicator displays in a separate pane (MACD) and overlay (signals/volume bars) 3. Default settings work well for most assets, but can be customized ### Signal Interpretation ### Visual Signals **Visual Signals:** - **Green "BUY" label** - Bullish MACD crossover confirmed by high volume - **Red "SELL" label** - Bearish MACD crossunder confirmed by high volume - **Green/Red candles** - Highlight bars with volume exceeding the threshold - **Light green/red background** - Emphasizes signal bars on the chart **Information Table:** A detailed information table appears in the top-right corner of the MACD pane, providing real-time transparency about the indicator's operation: - **Chart:** Current symbol being analyzed - **Exchange:** The exchange or data feed being used - **Pair:** The currency pair or asset name extracted from the ticker - **Volume From:** The actual symbol used for volume analysis - Orange color indicates CME or COMEX futures are being used (automatic institutional volume) - Yellow color indicates native volume from the chart symbol is being used - Hover tooltip shows whether automatic futures mapping is active - **High Volume:** Current status showing YES (green) when volume exceeds threshold, NO (gray) otherwise This table ensures complete transparency and allows you to verify that the correct volume source is being used for your analysis. **Volume Analysis:** - Gray histogram bars = Normal volume - Red histogram bars = High volume (exceeds threshold) - Green line = Volume moving average baseline **MACD Analysis:** - Blue line = MACD line (momentum indicator) - Orange line = Signal line (trend confirmation) - Gray dotted line = Zero line (bullish above, bearish below) ### Parameter Customization **MACD Parameters:** - Adjust Fast/Slow EMA lengths for different sensitivities - Shorter periods = More signals, faster response - Longer periods = Fewer signals, less noise **Volume Parameters:** - **Volume MA Period:** Higher values smooth volume analysis - **High Volume Ratio:** Lower values (1.5x) = More signals; Higher values (3.0x) = Fewer, stronger signals - **Volume Lookback Bars:** Controls how recent the volume spike must be **Direction Filters:** - **Only Buy Signals:** Enables long-only strategy mode - **Only Sell Signals:** Enables short-only strategy mode ### Alert Configuration The indicator includes three alert types: 1. **Buy Signal Alert** - Triggers when bullish signal appears 2. **Sell Signal Alert** - Triggers when bearish signal appears 3. **High Volume Alert** - Triggers when volume exceeds threshold To set up alerts: 1. Click the indicator name → "Add alert on Smart MACD Volume Trader" 2. Select desired alert condition 3. Configure notification method (popup, email, webhook, etc.) ## Trading Strategy Guidelines ### Best Practices **Recommended markets:** - Liquid stocks (large-cap, high daily volume) - Major forex pairs (EURUSD, GBPUSD, USDJPY, AUDUSD, USDCAD, USDCHF, NZDUSD) - Exotic forex pairs (USDMXN, USDRUB, USDBRL, USDZAR) - Cross pairs (EURJPY, GBPJPY, EURGBP, AUDJPY, EURAUD, GBPAUD) - Precious metals (Gold, Silver with automatic COMEX futures mapping) - Energy commodities (Crude Oil, Natural Gas with automatic NYMEX futures mapping) - Industrial metals (Copper with automatic COMEX futures mapping) - Major cryptocurrency pairs - Index futures and ETFs **Timeframe recommendations:** - **Day trading:** 5-minute to 15-minute charts - **Swing trading:** 1-hour to 4-hour charts - **Position trading:** Daily charts **Risk management:** - Use signals as entry confirmation, not standalone strategy - Combine with support/resistance levels - Consider overall market trend direction - Always use stop-loss orders ### Strategy Examples **Trend Following Strategy:** 1. Identify overall trend using higher timeframe (e.g., daily chart) 2. Trade only in trend direction 3. Use "Only Buy" filter in uptrends, "Only Sell" in downtrends 4. Enter on signal, exit on opposite signal or at resistance/support **Volume Breakout Strategy:** 1. Wait for consolidation period (low volume, tight MACD range) 2. Enter when signal appears with high volume (confirms breakout) 3. Target previous swing highs/lows 4. Stop loss below/above recent consolidation **Forex Scalping Strategy (with automatic CME futures):** 1. The indicator automatically detects forex pairs and uses CME futures volume 2. Trade during active sessions only (use session filter) 3. Focus on quick profits (10-20 pips) 4. Exit at opposite signal or profit target **Commodities Trading Strategy (Gold, Silver, Oil):** 1. The indicator automatically maps to COMEX and NYMEX futures contracts 2. Trade during high-liquidity sessions (overlap of major markets) 3. Use the high volume confirmation to identify institutional entry points 4. Combine with key support and resistance levels for entries 5. Monitor the information table to confirm futures volume is being used (orange color) 6. Exit on opposite MACD signal or at predefined profit targets ## Why This Combination Works ### The Volume Advantage Studies consistently show that price movements accompanied by high volume are more likely to continue, while low-volume movements often reverse. This indicator leverages this principle by requiring volume confirmation. **Key benefits:** 1. **Reduced False Signals:** Eliminates MACD whipsaws during low-volume consolidation 2. **Confirmation Bias:** Two independent indicators (price momentum + volume) agreeing 3. **Institutional Alignment:** High volume often indicates institutional participation 4. **Trend Validation:** Volume confirms that price momentum has "conviction" ### Statistical Edge By combining two uncorrelated signals (MACD crossovers and volume spikes), the indicator creates a higher-probability setup than either signal alone. The lookback mechanism ensures signals aren't missed if volume spike slightly precedes the MACD cross. ## Supported Exchanges and Automatic Detection The indicator includes intelligent asset detection that works across multiple exchanges and ticker formats: **Forex Exchanges (Automatic CME Mapping):** - FX (TradingView forex feed) - OANDA - FXCM - SAXO - FOREXCOM - PEPPERSTONE - EASYMARKETS - FX_IDC **Commodity Exchanges (Automatic COMEX/NYMEX Mapping):** - TVC (TradingView commodity feed) - COMEX (directly) - NYMEX (directly) - ICEUS **Other Asset Classes (Native Volume):** - Stock exchanges (NASDAQ, NYSE, AMEX, etc.) - Cryptocurrency exchanges (BINANCE, COINBASE, KRAKEN, etc.) - Index providers (SP, DJ, etc.) The detection algorithm analyzes three factors: 1. Exchange prefix in the ticker symbol 2. Pattern matching for currency pairs (6-letter codes) 3. Commodity identifiers in the symbol name This ensures accurate automatic detection regardless of which data feed or exchange you use for charting. The information table in the top-right corner always displays which volume source is being used, providing complete transparency. ## Technical Details **Calculations:** - MACD Fast MA: EMA(close, fastLength) - MACD Slow MA: EMA(close, slowLength) - MACD Line: Fast MA - Slow MA - Signal Line: SMA(MACD Line, signalLength) - Volume MA: Exponential MA of volume - High Volume: Current volume >= Volume MA × Ratio **Signal logic:** ``` Buy Signal = (MACD crosses above Signal) AND (High volume in last N bars) Sell Signal = (MACD crosses below Signal) AND (High volume in last N bars) ``` ## Parameters Reference | Parameter | Default | Description | |-----------|---------|-------------| | Volume Symbol | Blank | Manual override for volume source (leave blank for automatic detection) | | Use CME Futures | False | Legacy option (automatic detection is now built-in) | | Alert Session | 1530-2200 | Active session time range for alerts | | Timezone | UTC+1 | Timezone for alert sessions | | Volume MA Period | 20 | Number of periods for volume moving average | | High Volume Ratio | 2.0 | Volume threshold multiplier (2.0 = 200% of average) | | Volume Lookback | 5 | Number of bars to check for high volume confirmation | | MACD Fast Length | 12 | Fast EMA period for MACD calculation | | MACD Slow Length | 26 | Slow EMA period for MACD calculation | | MACD Signal Length | 9 | Signal line SMA period | | Only Buy | False | Filter to show only bullish signals | | Only Sell | False | Filter to show only bearish signals | | Show Signals | True | Display buy and sell labels on chart | ## Optimization Tips **For volatile markets (crypto, small caps):** - Increase High Volume Ratio to 2.5-3.0 - Reduce Volume Lookback to 3-4 bars - Consider faster MACD settings (8, 17, 9) **For stable markets (large-cap stocks, bonds):** - Decrease High Volume Ratio to 1.5-1.8 - Increase Volume MA Period to 30-50 - Use standard MACD settings **For forex (with automatic CME futures):** - The indicator automatically uses CME futures when forex pairs are detected - Set appropriate trading session based on your timezone - Use Volume Lookback of 5-7 bars - Consider session-based alerts only - Monitor the information table to verify correct futures mapping **For commodities (Gold, Silver, Oil, Copper):** - The indicator automatically maps to COMEX and NYMEX futures - Increase High Volume Ratio to 2.0-2.5 for metals - Use slightly higher Volume MA Period (25-30) for smoother analysis - Trade during active market hours for best volume data - The information table will show the futures contract being used (orange highlight) ## Limitations and Considerations **What this indicator does NOT do:** - Does not predict future price direction - Does not guarantee profitable trades - Does not replace proper risk management - Does not work well in extremely low-volume conditions **Market conditions to avoid:** - Pre-market and after-hours sessions (low volume) - Major news events (volatile, unpredictable volume) - Holidays and low-liquidity periods - Extremely low float stocks ## Conclusion Smart MACD Volume Trader represents a significant evolution of the traditional MACD indicator by combining volume confirmation with automatic institutional volume integration. This dual-confirmation approach significantly improves signal quality by filtering out low-conviction price movements and ensuring traders work with accurate volume data. The indicator's automatic detection and mapping system supports over 24 instruments across forex, commodities, and metals markets. By intelligently switching to CME and COMEX futures contracts when appropriate, the indicator provides forex and commodity traders with the same quality of volume data that stock traders naturally have access to. This indicator is particularly valuable for traders who want to: - Align their entries with institutional money flow - Avoid getting trapped in false breakouts - Trade forex pairs with reliable volume data - Access accurate volume information for gold, silver, and energy commodities - Combine momentum and volume analysis in a single, streamlined tool Whether you are day trading stocks, swing trading forex pairs, or positioning in commodities markets, this indicator provides a robust framework for identifying high-probability momentum trades backed by genuine institutional participation. The automatic futures mapping works seamlessly across all supported instruments, requiring no manual configuration or expertise in futures markets. --- ## Support and Updates This indicator is actively maintained and updated based on user feedback and market conditions. For questions about implementation or custom modifications, please use the comments section below. **Disclaimer:** This indicator is for educational and informational purposes only. Past performance does not guarantee future results. Always conduct your own analysis and risk management before trading.
Pine Script®指標
由Smart-Day-Trader提供
Tape (Time and Sales) with CVD📊 Tape (Time and Sales) with CVD & Velocity Overview A professional Time and Sales (Tape) indicator that displays real-time order flow data using Cumulative Volume Delta (CVD) to accurately identify buy and sell trades. Features a unique CVD-based Velocity metric to measure order flow intensity. Key Features 🎯 CVD-Based Trade Detection - Uses Cumulative Volume Delta to determine true buy/sell trades - Positive CVD change = Buy orders (hitting the ask) - Negative CVD change = Sell orders (hitting the bid) - More accurate than traditional bid/ask comparison methods ⚡ Directional Velocity Metric - Calculates CVD change rate over a customizable time window (default: 60 seconds) - Displays the speed of order flow (lots per second) - Color-coded based on direction: - Blue: Bullish velocity (buyers in control) - Red: Bearish velocity (sellers in control) - Highlights when velocity exceeds your threshold 📋 Real-Time Tape Display Each row shows: - Price: Color-coded by tick direction (uptick/downtick) - Size: Volume with buy/sell background colors - Time: Customizable format and timezone - CVD: Running cumulative volume delta value 🎨 Visual Features - Large print highlighting: Automatically highlights significant orders - Price tick coloring: See upticks and downticks at a glance - Configurable colors: Fully customizable color scheme - Flexible positioning: Place the tape anywhere on your chart - Invertible display: Choose whether new prints scroll up or down Settings CVD Configuration - Custom timeframe: Choose the resolution for CVD calculation (1S recommended for precision) - Anchor period: Set the CVD reset period (Daily, Weekly, etc.) Velocity Settings - Enable/Disable: Toggle velocity metric on/off - Period: Time window for velocity calculation (1-60 seconds) - Precision: Decimal places to display - Threshold: Set alert level for significant velocity Tape Customization - Tape length: Number of rows to display (1-100) - Min print size: Filter out small trades - Large size threshold: Define what qualifies as a "large" order - Size precision: Control decimal places for volume display Display Options - Text size: Auto, tiny, small, normal, large, huge - Position: Top/Middle/Bottom × Left/Center/Right - Time format: Customize timestamp display (ISO 8601) - Timezone: Use exchange time or specify custom IANA timezone - Column visibility: Show/hide Price, Time, or CVD columns - Invert direction: Reverse tape scroll direction How to Use For Scalpers & Day Traders 1. Watch the Velocity metric for sudden spikes in order flow intensity 2. Look for large prints highlighted in yellow - these often indicate institutional activity 3. Monitor the CVD column to see if buyers or sellers are dominating 4. Use price tick colors to spot momentum shifts in real-time For Order Flow Analysis - High velocity + large buy orders = Strong bullish pressure - High velocity + large sell orders = Strong bearish pressure - Velocity divergence from price = Potential reversal signal - Consistent buy/sell flow = Trend confirmation Best Practices - Use 1S timeframe for most accurate CVD calculations on liquid markets - Adjust Large Size Min based on the instrument's average volume - Set Velocity Threshold to filter noise and highlight significant order flow - Consider using smaller tape length (10-15 rows) for cleaner display Technical Details - Uses `ta.requestVolumeDelta()` for precise CVD calculation - Leverages `request.security_lower_tf()` for sub-bar data access - Real-time only (no historical replay to ensure data accuracy) - Optimized performance with single-loop iteration Requirements - TradingView Premium, Pro, or Pro+ (required for lower timeframe data access) - Works best on liquid markets with frequent trades Notes - The indicator displays real-time data only and will show "Waiting for real-time data..." until live trades occur - CVD accuracy depends on the exchange's volume data quality - Velocity is calculated as absolute value but color-coded by direction --- *Perfect for order flow traders, tape readers, and anyone who wants to see what's happening beneath the price action in real-time.* Credits Original concept modified to use CVD-based buy/sell detection with added directional velocity metric. --- License: Mozilla Public License 2.0
Pine Script®指標
由daniel_abzakh提供
Dynamic S/R# Complete Parameter Guide ## 1. Lookback Bars (Default: 500) - **Function**: Number of historical bars the script analyzes to identify levels - **Example**: If set to 500, the script examines the last 500 candles - **Increase when**: Trading long-term, searching for old historical levels - **Decrease when**: Day trading or short-term trading, viewing only recent levels - **Recommendation**: 200-300 for day trading, 500-1000 for swing trading ## 2. Min Touches (Default: 3) - **Function**: Minimum number of touches required for a level to be considered valid - **Example**: If set to 3, a level with only 2 touches will not be displayed - **Increase (4-5) when**: You want only very strong and confirmed levels - **Decrease (2) when**: You want to identify potential levels early - **Recommendation**: 3 is a balanced value - not too loose, not too strict ## 3. Extrema Type (Default: both) - **Function**: Which type of extrema to identify - **Options**: - **min**: Support levels only (pivot lows) - **max**: Resistance levels only (pivot highs) - **both**: Both types - **When to change**: - In uptrend looking for support only: select "min" - In downtrend looking for resistance only: select "max" ## 4. Pivot Window (Default: 5) - **Function**: How many bars on each side are required to confirm a pivot - **Technical explanation**: pivot low = price lower than 5 bars before it and 5 bars after it - **Increase (7-10) when**: - More significant extrema needed - Less noise, fewer levels - Good for higher timeframes - **Decrease (3-4) when**: - More sensitivity needed - More levels wanted - Good for scalping - **Important**: Higher value = quality over quantity ## 5. Clustering Sensitivity % (Default: 0.5%) - **Function**: Percentage deviation allowed to group touches into the same level - **Example**: If level at $100 and sensitivity 0.5%, touches between $99.5-$100.5 count as same level - **Increase (1-2%) when**: - Volatile assets (crypto, small stocks) - More consolidation of nearby levels - Fewer levels on chart - **Decrease (0.2-0.3%) when**: - Stable assets (indices, forex majors) - Higher precision needed - Separation between close levels - **Recommendation**: Start at 0.5% and adjust per instrument ## 6. Max Levels to Show (Default: 10) - **Function**: Maximum number of support/resistance lines displayed on chart - **Selection criteria**: Script prioritizes levels by: 1. Number of touches (more = stronger) 2. Price spread (tighter = more accurate) 3. Recency (most recent touch closer to present) - **Low value (5-10)**: Clean chart with only strongest levels - **High value (20-50)**: More options, including weaker levels ## 7. Min Bar Separation (Default: 5) - **Function**: Minimum distance in bars between two touches of the same type (min or max) - **Why important**: Prevents double-counting the same extremum - **Example**: If pivot low at bar 100 and another at bar 103, only one counts - **Increase (10-20) when**: - Lower timeframes with much noise - Avoiding false consolidation - **Decrease (2-3) when**: - Higher timeframes - Identifying quick movements ## 8. Alert Proximity % (Default: 1%) - **Function**: Distance from level at which to trigger alert - **Example**: Level at $100, proximity 1% = alert between $99-$101 - **Increase (2-3%) when**: - Earlier alerts wanted - More preparation time needed - May create false alerts - **Decrease (0.5%) when**: - More precise alerts wanted - Stronger confirmation needed - Less reaction time - **Recommendation**: 1% works well for most cases ## 9. Show Price Bands (Default: true) - **Function**: Displays zone around level instead of just a line - **Zone size**: Plus/minus Clustering Sensitivity % - **Why useful**: - Levels are never exact lines - Zone better represents reality - Helps identify entries and exits within zone - **Off**: Cleaner chart with only lines ## 10. Show Info Table (Default: true) - **Function**: Displays information table in chart corner - **Table contents**: - Type: S (Support) / R (Resistance) / N (Neutral) - Price: Level price - Touches: Number of touches - Bars Ago: How many bars since last touch - **Off**: If you know the levels and want a clean chart ## Recommended Settings by Trading Style: ### Day Trading (Intraday) ``` Lookback Bars: 200-300 Min Touches: 2-3 Pivot Window: 3-5 Sensitivity: 0.3-0.5% Max Levels: 5-8 ``` ### Swing Trading (Days-Weeks) ``` Lookback Bars: 500-800 Min Touches: 3-4 Pivot Window: 5-7 Sensitivity: 0.5-1% Max Levels: 10-15 ``` ### Position Trading (Months) ``` Lookback Bars: 1000-2000 Min Touches: 4-5 Pivot Window: 7-10 Sensitivity: 1-2% Max Levels: 8-12 ``` **Important tip**: Start with default values and adjust gradually based on the asset and results.
Pine Script®指標
由ariel_kopi提供
Traffic Light MA — Trend IndicatorThis script displays a simple “traffic light” circle that reflects the market trend based on two moving averages (MA). -Green: Price > Fast MA > Slow MA → Uptrend confirmation -Yellow: Mixed conditions (transition zone) -Red: Slow MA > Fast MA > Price → Downtrend confirmation You can customize: -MA type (SMA or EMA) -Lengths of both MAs -Timeframe used for evaluation (e.g. Daily, 4H, Weekly) This tool is designed for traders who prefer a minimalistic chart, showing only a clean color signal instead of multiple lines. Recommendation: For small MAs (8,15,21) use EMA, for big MAs (50,100,200) use SMA
Pine Script®指標
由Luigui_Herrera提供
Reversal Zones// This indicator identifies likely reversal zones above and below current price by aggregating multiple technical signals: // • Prior Day High/Low // • Opening Range (9:30–10:00) // • VWAP ±2 standard deviations // • 60‑minute Bollinger Bands // It draws shaded boxes for each base level, then computes a single upper/lower reversal zone (closest level from combined signals), // with configurable zone width based on the expected move (EM). Within those reversal zones, it highlights an inner “strike zone” // (percentage of the box) to suggest optimal short-option strikes for credit spreads or iron condors. // Additional features: // • Optional Expected Move lines from the RTH open // • 15‑minute RSI/Mean‑Reversion and Trend‑Day confluence flags displayed in a dashboard // • Toggles to include/exclude each signal and adjust styling // How to use: // 1. Adjust inputs to select which levels to include and set the expected move parameters. // 2. Reversal boxes (red above, green below) show zones where price is most likely to reverse. // 3. Inner strike zones (darker shading) guide optimal short-strike placement. // 4. Dashboard confirms whether mean-reversion or trend-day conditions are active. // Customize colors and visibility in the settings panel. Enjoy disciplined, confluence-based trade entries!
Pine Script®指標
由shyTortoise84341提供
Alerts Killzones + PD/WL/ML Levels (No Labels)This indicator automatically highlights the London and New York killzones and triggers alerts at key price levels — without adding any labels or text clutter to the chart. Features: Highlights London (10:00–13:00) and New York (15:00–17:00) sessions (GMT+3, Romania). Draws and updates key levels automatically: PDH / PDL – Previous Day High & Low WH / WL – Previous Week High & Low MH / ML – Previous Month High & Low Alerts when price touches any of these levels. Alerts at session opens and closes for both London and New York. Clean interface – no labels or extra markers on chart. Ideal for: Traders who follow ICT concepts, session-based setups, or liquidity sweeps and want precise alerts without chart noise.
Pine Script®指標
由danutz3llu提供
Arnaud Legoux Gaussian Flow | AlphaNattArnaud Legoux Gaussian Flow | AlphaNatt A sophisticated trend-following and mean-reversion indicator that combines the power of the Arnaud Legoux Moving Average (ALMA) with advanced Gaussian distribution analysis to identify high-probability trading opportunities. 🎯 What Makes This Indicator Unique? This indicator goes beyond traditional moving averages by incorporating Gaussian mathematics at multiple levels: ALMA uses Gaussian distribution for superior price smoothing with minimal lag Dynamic envelopes based on Gaussian probability zones Multi-layer gradient visualization showing probability density Adaptive envelope modes that respond to market conditions 📊 Core Components 1. Arnaud Legoux Moving Average (ALMA) The ALMA is a highly responsive moving average that uses Gaussian distribution to weight price data. Unlike simple moving averages, ALMA can be fine-tuned to balance responsiveness and smoothness through three key parameters: ALMA Period: Controls the lookback window (default: 21) Gaussian Offset: Shifts the Gaussian curve to adjust lag vs. responsiveness (default: 0.85) Gaussian Sigma: Controls the width of the Gaussian distribution (default: 6.0) 2. Gaussian Envelope System The indicator features three envelope calculation modes: Fixed Mode: Uses ATR-based fixed width for consistent envelope sizing Adaptive Mode: Dynamically adjusts based on price acceleration and volatility Hybrid Mode: Combines ATR and standard deviation for balanced adaptation The envelopes represent statistical probability zones. Price moving beyond these zones suggests potential mean reversion opportunities. 3. Momentum-Adjusted Envelopes The envelope width automatically expands during strong trends and contracts during consolidation, providing context-aware support and resistance levels. ⚡ Key Features Multi-Layer Gradient Visualization The indicator displays 10 gradient layers between the ALMA and envelope boundaries, creating a visual "heat map" of probability density. This helps traders quickly assess: Distance from the mean Potential support/resistance strength Overbought/oversold conditions in context Dynamic Color Coding Cyan gradient: Price below ALMA (bullish zone) Magenta gradient: Price above ALMA (bearish zone) The ALMA line itself changes color based on price position Trend Regime Detection The indicator automatically identifies market regimes: Strong Uptrend: Trend strength > 0.5% with price above ALMA Strong Downtrend: Trend strength < -0.5% with price below ALMA Weak trends and ranging conditions 📈 Trading Strategies Mean Reversion Strategy Look for price entering the extreme Gaussian zones (beyond 95% of envelope width) when trend strength is moderate. These represent statistical extremes where mean reversion is probable. Signals: Long: Price in lower Gaussian zone with trend strength > -0.5% Short: Price in upper Gaussian zone with trend strength < 0.5% Trend Continuation Strategy Enter when price crosses the ALMA during confirmed strong trend conditions, riding momentum while using the envelope as a trailing stop reference. Signals: Long: Price crosses above ALMA during strong uptrend Short: Price crosses below ALMA during strong downtrend 🎨 Visualization Guide The gradient layers create a "probability cloud" around the ALMA: Darker shades (near ALMA): High probability zone - price tends to stay here Lighter shades (near envelope edges): Lower probability - potential reversal zones Price at envelope extremes: Statistical outliers - strongest mean reversion setups ⚙️ Customization Options ALMA Parameters Adjust period for different timeframes (lower for day trading, higher for swing trading) Modify offset to tune responsiveness vs. smoothness Change sigma to control distribution width Envelope Configuration Choose envelope mode based on market characteristics Adjust multiplier to match instrument volatility Modify gradient depth for visual preference (5-15 layers) Signal Enhancement Momentum Length: Lookback for trend strength calculation Signal Smoothing: Additional EMA smoothing to reduce noise 🔔 Built-in Alerts The indicator includes six pre-configured alert conditions: ALMA Trend Long - Price crosses above ALMA in strong uptrend ALMA Trend Short - Price crosses below ALMA in strong downtrend Mean Reversion Long - Price enters lower Gaussian zone Mean Reversion Short - Price enters upper Gaussian zone Strong Uptrend Detected - Momentum confirms strong bullish regime Strong Downtrend Detected - Momentum confirms strong bearish regime 💡 Best Practices Use on clean, liquid markets with consistent volatility Combine with volume analysis for confirmation Adjust envelope multiplier based on backtesting for your specific instrument Higher timeframes (4H+) generally provide more reliable signals Use adaptive mode for trending markets, hybrid for mixed conditions ⚠️ Important Notes This indicator works best in markets with normal price distribution Extreme news events can invalidate Gaussian assumptions temporarily Always use proper risk management - no indicator is perfect Backtest parameters on your specific instrument and timeframe 🔬 Technical Background The Arnaud Legoux Moving Average was developed to solve the classic dilemma of moving averages: the trade-off between lag and noise. By applying Gaussian distribution weighting, ALMA achieves superior smoothing while maintaining responsiveness to price changes. The envelope system extends this concept by creating probability zones based on volatility and momentum, effectively mapping where price is "likely" vs "unlikely" to be found based on statistical principles. Created by AlphaNatt - For educational purposes. Always practice proper risk management. Not financial advice. Always DYOR.
Pine Script®指標
由AlphaNatt提供
1
Trendline MTF Optimized1️⃣ What the Script Does The script automatically draws trendlines connecting pivot highs and lows for multiple timeframes on your chart. Pivot highs → connect recent tops Pivot lows → connect recent bottoms It also shows a legend so you can see which line belongs to which timeframe. Why it’s useful: Helps spot trend direction across multiple timeframes at a glance. Highlights support and resistance levels automatically. Useful for scalpers, swing traders, and multi-timeframe analysis. 2️⃣ Inputs the User Can Adjust Input What it Means for the User Pivot Left Bars How many bars to the left the script checks to confirm a pivot. More bars → stronger pivot, slower reaction. Pivot Right Bars How many bars to the right it checks. Similar effect as left bars. Show Debug Pivot Labels Shows the exact pivot values on the chart. Good for learning or checking accuracy. Show Legend Shows the small table with line symbols and timeframes. Helps you quickly know which line belongs to which timeframe. 3️⃣ Timeframes The script automatically calculates pivot points for multiple timeframes: 1 min, 3 min, 5 min, 15 min, 30 min, 1 hour, 4 hours, 1 day Each timeframe gets its own color and line thickness. This helps distinguish them visually. 4️⃣ How Trendlines Are Drawn Pivot Highs (Red lines): Connects the previous top to the most recent top on that timeframe. Pivot Lows (Green lines): Connects the previous bottom to the most recent bottom. If there’s no previous pivot yet, it just starts the line at the first pivot detected. Optional debug labels show the price and timeframe of each pivot. User Benefit: You can instantly see short-term and long-term trendlines without manual drawing. 5️⃣ Legend Table Shows which line corresponds to which timeframe. Uses small bar symbols (▁▁▁▁▁, ▂▂▂▂▂, etc.) to match line thickness. Placed at the top-right corner by default. User Benefit: Even if the chart is cluttered, you always know which line represents which timeframe. 6️⃣ How a User Reads It on the Chart Red line going down → recent highs are decreasing → short-term downtrend. Green line going up → recent lows are increasing → short-term uptrend. Multiple lines of different thickness/colors → different timeframes. Crossovers of lines or areas where green and red lines converge → potential support/resistance zones. 7️⃣ User Actionable Tips Adjust left/right bars for sensitivity: Lower bars → trendlines react faster (good for scalping). Higher bars → trendlines smoother (good for swing trades). Use debug labels initially to see pivot points. Check legend to quickly identify which line belongs to which timeframe. Combine trendlines with other indicators (like RSI, ADX) for better signals. ✅ Summary for Users “This script automatically draws support/resistance trendlines across multiple timeframes, labels pivots optionally, and shows a legend so you know which line belongs to which timeframe. Adjust pivot sensitivity to match your trading style.”
Pine Script®指標
由Just-a-Trader提供