WR% VARIATIONThis indicator plot the change of the William R%.
We have 3 hlines, 50, 0, -50
You can use this as a confirmation indicator for different entries:
ENTRIES
When change is higher than 50 we have a strong LONG signal
When change is lower than -50 we have a strong SHORT signal
CONTINUATION TRADES
When we are in a Bull Market, candle is red and change crossover the 0 line, we have a LONG continuation trade
When we are in a Bear Market, candle is green and change crossunder the 0 line, we have a SHORT continuation trade
EXITS
When we are in a Bull Market, candle is green and change crossunder the 0 line, we have an Exit, or a Reversal
When we are in a Bear Market, candle is read and change crossover the 0 line, we have an Exit, or a Reversal
在腳本中搜尋"科创50指数资金流向如何"
RISK-OFF.RISK.ON-ppxdf.v3======================================= RISK-OFF & RISK ON INDEX ================================================
1. Stock Price Momentum: Measuring the Standard & Poor's 500 Index ( S&P 500 ) versus its 125-day moving average (MA)
2. Stock Price Strength: Calculating the number of stocks hitting 52-week highs versus those hitting 52-week lows on the New York Stock Exchange (NYSE)
3. Stock Price Breadth: Analyzing trading volumes in rising stocks against declining stocks
4. Put and Call Options: How much do put options lag behind call options, signifying greed, or surpass them, indicating fear
5. Junk Bond Demand: Gauging appetite for higher risk strategies by measuring the spread between yields on investment-grade bonds and junk bonds
6. Market Volatility: CNN measures the Chicago Board Options Exchange Volatility Index ( VIX ), concentrating on a 50-day MA
7. Safe Haven Demand: The difference in returns for stocks versus treasuries
Each of these seven indicators is measured on a scale from 0 to 100, with the index being computed by taking an equal-weighted average of each of them.
A reading of 50 is deemed NEUTRAL.
Above 50 signals the market with RISK-ON. (GREED)
Below 50, Signals the market with RISK-OFF (FEAR)
8
Ultimate Moving Average Package (17 MA's)Included is the:
VWAP
Current time frame 10 EMA
Current time frame 20 EMA
Current time frame 50 EMA
Current time frame 10 SMA
Current time frame 20 SMA
Current time frame 50 SMA
Daily 10 EMA
Daily 20 EMA
Daily 50 EMA
Daily 50 SMA
Daily 100 SMA
Daily 200 SMA
Weekly 100 SMA
Weekly 200 SMA
Monthly 100 SMA
Monthly 200 SMA
All Daily/Weekly/Monthly MA's can be seen on intraday charts. Current time frame MA's change depending on your time frame. Obviously you dont need all 17 on your chart but you can pick the ones you like and disable the rest.
OVL_Kikoocycle Beta_Pine3This script use :
- A custom Chande Kroll Stop for generate the channel
- Some custom Parabolic S.A.R for generate cycles
This script can be separated into 3 categories:
- Channel Kroll generator : one layer for the actual interval and a layer for a Large Timeframe .(with ratio)
- "Range" generator : one layer for actual Interval and a layer for a Large Timeframe.(with automique ratio)
-Targets generator : one layer for actual interval with different trend.
"Channel Kroll" :
- I "hijack" the Chande Kroll Stop formula with custom parameters for generate this channel. Overall, it works like other types of channels like BB, etc... A midline and two borders. The thickness of the borders are relatively important here. A thick border shows some resistance of the area. And so the probability of seeing the market return to its first contact is stronger. While a very thin and vertical border would rather play the role of a breach, a bit like the idea of gaps. Often the market seems to want to go after several cycles.
You can activate its Large TimeFrame version, its midline is strong and fine borders helps to judge the risk.
SARget + "SAR Limited" :
- (S.A.R + targets) The philosophy of this function is simple... When a small cycle is broken, it creates a mark on a higher cycle. So on until the SAR called "SAR Limited". For simplicity, imagine a fractal image but inverted ... Break the small figure, it will mark the larger figure at this time but to get there you still have to make the way to the small figure.
Targets are : cross ("+") for fast targets(hidden by default because, theire work only on lower interval), squares (for medium trend), Xcross(for large trend) and red cross(they try to find a large contexte). When a target proc, it is for later (market need some cycles for going to, but it is relative to your interval). This gives you speculative goals.
Why 2 targets for a same type and a triangle with a 90deg angle : This give a potential area for management.The triangle help to visualize the SAR and to juge the market reaction. You need to adapte your trade with that...
Targets may be slightly too far because I am a bad coder... Currently the targets appear at the moment of rupture but it would be necessary to wait for the end of the breaking movement. Which can bring a positional error if the break is violent.
RnG and LTF RnG :
- Attempt to generate a Fibo range for each cycle and see interressing areas to enter or exit. This is played with the same philosophy as the Fibo extensions and retracement.
When a new RnG is generated, do not rush. It appears showing 50/50 for both sides. When a new RnG is generated, do not rush. It appears showing 50/50 for both sides. As long as the market is out of the middle zone (the 3 lines) keep in mind the past RnG.
When the market is out of range, you can use the FibRetracement tool for have extensions. One point at each end, as on the presentation graph. (Values 1.14, 1.272, 1.414, 1.618, 1.786, 2, 2.4 and 4 work well.) If too extrem you can active the LTF version.
Never fomo a break, market like to pull a level... Observe and be patient.
It's easier to use than to explain xD
NB : Do not use the LTF as context. For this, it is better to look at a higher interval.
I invite you to look in the style tab of the script and deselect the plots named UNCHECKEME, this will ease your browser.
Amazing Crossover System - 100+ pips per day!I got the main concept for this system on another site. While I have made one important change, I must stress that the heart of this system was created by someone else! We must give credit where credit is due!
Y'all know baby pips. @ForexPhantom published about this system and did both back and forward test around 10 years ago.
I found it on the sit and now I put it to code to see how it performs. I assume 10 points spread for every trade. I use Renesource or AxiTrader to get the low spreads.
There are 2 mods, the single trades and constant trading on the direction.
Main concept
Indicators
5 EMA -- YELLOW
10 EMA -- RED
RSI (10 - Apply to Median Price: HL/2) -- One level at 50.
TIME FRAME
1 Hour Only (very important!)
PAIRS
Virtually any pair seems to work as this is strictly technical analysis.
I recommend sticking to the main currencies and avoiding cross currencies (just his preference).
WHEN TO ENTER A TRADE
Enter LONG when the Yellow EMA crosses the Red EMA from underneath.
RSI must be approaching 50 from the BOTTOM and cross 50 to warrant entry.
Enter SHORT when the Yellow EMA crosses the Red EMA from the top.
RSI must be approaching 50 from the TOP and cross 50 to warrant entry.
I've attached a picture which demonstrates all these conditions.
That's it!
f.bpcdn.co
MFIww MFI/RSI_v2[wozdux]A new version of the indicator Mfi_v2. Added new control parameters.
tt - the averaging period of the volume.
Len - the period for calculating the MPI.
nn-averaging period MFI (blue line). level-critical levels from below and above (black horizontal lines).
Level 0 or 50 - switch between different histogram views with the middle at either level 50 or level 0.
key level-key to remove black critical levels.
key ema (MFI, nn) - key to remove mfi averaging (blue line).
key color-key to remove histogram coloring.
key colomns a-line - key switching modes represent the mfi histrogram or line.
---------------------------
Новая версия индикатора MFIww_v2. Добавлены новые управляющие параметры.
tt- период усреднения объема.
Len - период вычисления MFI.
nn- период усреднения MFI (голубая линия).
level- критические уровни снизу и сверху (черные горизонтальные линии).
Level 0 or 50 - переключение между разными представлениями гистрограммы с серединой либо на уровне 50 , либо на уровне 0.
key level- ключ убрать черные критические уровни.
key ema(mfi,nn) - ключ убрать усреднение mfi (голубая линия).
key color- ключ убрать расцветку гистрограммы.
key colomns-line - ключ переключения режимов представления mfi гистрограммой или линией.
GoTiT|Simple Auto Fib v1.0Simple Auto Fib!
Notes:
1. Always set the trend manually! Don't rely on the auto trend detection.
2. The first parameter Length sets the number of candles back (left) to search for highs and lows from the current candle.
3. The High Offset parameter sets the number of candles back (left) to ignore/skip before searching for highs.
4. The Low Offset parameter sets the number of candles back (left) to ignore/skip before searching for lows.
5. The offset parameters change the behavior of the Length parameter.
Example 1:
Length = 100
High Offset = 0
Low Offset = 0
This is the default behavior, and the search for highs and lows occurs on the last 100 candles.
Example 2:
Length = 50
High Offset = 20 (Ignore the last 20 candles, and search for highs starting at candle 21 to 71 (or 50 candles back)
Low Offset = 15 (Ignore the last 15 candles, and search for lows starting at candle 16 to 66 (or 50 candles back)
In example 2, search starts on candle 21 for highs, and candle 16 for lows and extends 50 candles further back from there.
6. The Trend Detection parameter sets the number of candles back (left) to use in the trend calculations. Larger values give better "marco trend" detection. Smaller values give better "micro trend" detection. See note #1.
7. The white fib line is fib0. Assuming you correctly set the trend manually (or the trend is auto detected correctly), in a downtrend fib0 should be bellow the red fib line, and in an uptrend fib0 should be above the red fib line.
MACD + Stochastic + RSI (Long + Short)My strategy uses a combination of three indicators MACD Stochastic RSI .
The Idea is to GO LONG when ( MACD > Signal and RSI > 50 and Stochastic > 50) occures at the same time
and GO SHORT when ( MACD < Signal and RSI < 50 and Stochastic < 50)
This strategy works well on futures and stocks especially during market breaking up after consolidation
The best results are on Daily charts , so its NOT a scalping strategy. But it can work also on 1H charts.
The strategy does not have any stops and profit targets, so we can take all the market can give us at the moment.
The exit point only when MACD goes under/over Signal line
Its Preformance is quite stable.
So, use it, trade it.
If it will help you to imprive your trading results, please donate me
BTC: 12kd1F8buWisUBdq27BBwRkUvzW7Ey3og5
Trend Lines and MoreMulti-Indicator consisting of several useful indicators in a single package.
TREND LINES
-By default the 20 SMA and 50 SMA are shown.
-Use "MOVING AVERAGE TYPE" to select SMA, EMA, Double-EMA, Triple-EMA, or Hull.
-Use "50 MA TREND COLOR" to have the 50 turn green/red for uptrend/downtrend.
-Use "DAILY SOURCE ONLY" to always show daily averages regardless of timeframe.
-Use "SHOW LONG MA" to also include 100, 150, and 200 moving averages.
-Use "SHOW MARKERS" to show a small colored marker identifying which line is which.
OTHER INDICATORS
-You can show Bollinger Bands and Parabolic SAR.
-You can highlight key reversal times (9:50-10:10 and 14:40-15:00).
-You can show price offset markers, where was the price "n" periods ago.
That last one is useful to show the level of prices which are about to "fall off" the moving average
and be replaced with current price. So for example, if current price is significantly below the
200-days-ago price, you can gauge the difficulty for the 200 MA to start climbing again.
Multi SMA EMA WMA HMA BB (4x3 MAs Bollinger Bands) Pro MTF - RRBMulti SMA EMA WMA HMA 4x3 Moving Averages with Bollinger Bands Pro MTF by RagingRocketBull 2018
Version 1.0
This indicator shows multiple MAs of any type SMA EMA WMA HMA etc with BB and MTF support, can show MAs as dynamically moving levels.
There are 4 MA groups + 1 BB group. You can assign any type/timeframe combo to a group, for example:
- EMAs 50,100,200 x H1, H4, D1, W1 (4 TFs x 3 MAs x 1 type)
- EMAs 8,13,21,55,100,200 x M15, H1 (2 TFs x 6 MAs x 1 type)
- D1 EMAs and SMAs 12,26,50,100,200,400 (1 TF x 6 MAs x 2 types)
- H1 WMAs 7,77,231; H4 HMAs 50,100,200; D1 EMAs 144,169,233; W1 SMAs 50,100,200 (4 TFs x 3 MAs x 4 types)
- +1 extra MA type/timeframe for BB
compile time: 25-30 sec
full redraw time after parameter change in UI: 3 sec
There are several versions: Simple, MTF, Pro MTF, Advanced MTF and Ultimate MTF. This is the Pro MTF version. The Differences are listed below. All versions have BB
- Simple: you have 2 groups of MAs that can be assigned any type (5+5)
- MTF: +2 custom Timeframes for each group (2x5 MTF)
- Pro MTF: +4 custom Timeframes for each group (4x3 MTF), MA levels and show max bars back options
- Advanced MTF: +2 extra MAs/group (4x5 MTF), custom Ticker/Symbol, backreferences for type, TF and MA lengths in UI
- Ultimate MTF: +individual settings for each MA, custom Ticker/Symbols
Features:
- 4x3 = 12 MAs of any type including Hull Moving Average (HMA)
- 4x MTF groups with step line smoothing
- BB +1 extra TF/type for BB MAs
- 12 MA levels with adjustable group offsets, indents and shift
- show max bars back
- you can show/hide both groups of MAs/levels and individual MAs
Notes:
1. based on 3EmaBB, uses plot*, barssince and security functions
2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private version
3. Levels = trackprice implementation
4. Show Max Bars Back = show_last implementation
5. uses timeframe textbox instead of input resolution to allow for 120 240 and other custom TFs. Also supports TFs in hours: 2H or H2
6. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params
7. Smoothing is applied by default for visual aesthetics on MTF. To use exact ma mtf values (lines with stair stepping) - disable it
MTF Notes:
- uses simple timeframe textbox instead of input resolution dropdown to allow for 120, 240 and other custom TFs, also supports timeframes in H: 2H, H2
- Groups that are not assigned a Custom TF will use Current Timeframe (0).
- MTF will work for any MA type assigned to the group
- MTF works both ways: you can display a higher TF MA/BB on a lower TF or a lower TF MA/BB on a higher TF.
- MTF MA values are normally aligned at the boundary of their native timeframe. This produces stair stepping when a higher TF MA is viewed on a lower TF.
Therefore X Y Point Density/Smoothing is applied by default on MA MTF for visual aesthetics. Set both to 0 to disable and see exact ma mtf values (lines with stair stepping and original mtf alignment).
- Smoothing is disabled for BB MTF bands because fill doesn't work with smoothed MAs after duplicate values are replaced with na.
- MTF MA Value fluctuation is possible on the current bar due to default security lookahead
Smoothing:
- X,Y == 0 - X,Y smoothing disabled (stair stepping on high TFs)
- X == 0, Y > 0 - X,Y smoothing applied to all TFs
- Y == 0, X > 0 - X smoothing applied to all TFs < deltaX_max_tf, Y smoothing disabled
- X > 0, Y > 0 - Y smoothing applied to all TFs, then X smoothing applied to all TFs < deltaX_max_tf
X Smoothing with Y == 0 - shows only every deltaX-th point starting from the first bar.
X Smoothing with Y > 0 - shows only every deltaX-th point starting from the last shown Y point, essentially filling huge gaps remaining after Y Smoothing with points and preserving the curve's general shape
X Smoothing on high TFs with already scarce points produces weird curve shapes, it works best only on high density lower TFs
Y Smoothing reduces points on all TFs, removes adjacent points with prices within deltaY, while preserving the smaller curve details.
A combination of X,Y produces the most accurate smoothing. Higher delta value - larger range, more points removed.
Show Max Bars Back:
- can't set plot show_last from input -> implemented using a timenow based range check
- you can't delete/modify history once plotted, so essentially it just sets a start point for plotting (from num_bars bars back) that works only in realtime mode (not in replay)
Levels:
You can plot current MA value using plot trackprice=true or by checking Show Price Line in Style. Problem is:
- you can only change color (not the dashed line style, width), have both ma + price line (not just the line), and it's full screen wide
- you can't set plot trackprice from input => implemented using plotshape/plotchar with fixed text labels serving as levels
- there's no other way of creating a dynamic level: hline, plot, offset - nothing else works.
- you can't plot a text var - all text strings must be constants, so you can't change the style, width and text labels without recompiling.
- from input you can only adjust offset, indent and shift for each level group, and change color
- the dot below each level line is the exact MA value. If you want just the line swap plotshape with plotchar, recompile and save as your private version, adjust Y shift.
To speed up redraw times: reduce last_bars to ~2000, recompile and use as your own private version
Pinescript is a rudimentary language (should be called Painscript instead) that can basically only plot data. You can't do much else. Please see the code for tips and hints.
Certain things just can't be done or require shady workarounds and weeks of testing trying to resolve weird node.js compiler errors.
Feel free to learn from/reuse/change the code as needed and use as your own private version. See comments in code. Good Luck!
Simple_longshort_signalsLong Entry
Criteria:
1) Green candle close above 50MA
2) Green candle close above 20MA
3) MA of RSI(14) is cross upward 50
Result: displays green up arrow
Long Exit
Criteria:
1) Three red candles in a row
2) Any candle close bellow 20MA
3) MA of RSI(14) cross downward 50
Result: displays green diamond
Short Entry
1) Red candle close bellow 50MA
2) Red candle close bellow 20MA
3) MA of RSI(14) is cross downward 50
Result: displays red down arrow
Short Exit
Criteria
1) Three green candles in a row
2) Any candle close above 20MA
3) MA of RSI(14) is cross upward 50
Result: displays red diamond
Noro's Double RSI Strategy 1.0Strategy uses only 2 RSI indicators. Slow and fast.
If slow RSI > 50 and fast RSI < 50 - to open a long-position
If slow RSI < 50 and fast RSI > 50 - to open a short-position
If the long-position is open and a candle green - to close a long-position
if the short-position is open and a candle red - to close a short-position
GoldenCross by PuffyThis is a simple trading strategy that seeks the Golden Cross and Death Cross on the 4HR chart. The fast moving indicator in this strategy is the EMA 50 and the slow moving indicator is the EMA 200. When the EMA 50 crosses over the EMA 200 the strategy indicates a buy. When the EMA 50 crosses below the EMA 200 the strategy indicates a sell. This strategy averages trades in the 40 - 50 day range and as such should not be used with heavy leverage.
Exponential Moving Average (Set of 3) [Krypt] + 13/34 EMAsI took Krypt's script and essentially added on to it.
the 20/50/100/200 EMAs should be used together as support and resistance as normal.
Wait for price to break 200 EMA
Wait for 50 EMA to cross 200 EMA
Wait for pullback to 50 EMA to open position
20 and 100 EMAs are for extra information about moving support and resistance
and 13/34 EMAs should be used in conjunction
When 13 EMA crosses 34 EMA, open position
When price gets far from 13/34, close position (because price will attempt to revert back to mean)
This is better for scalping and swing trades than the 20/50/100/200 setup.
Twitter: @AzorAhai06
MTF EMAExponential Moving Average indicator that can be configured to display different timeframe EMA's.
Timeframe is set in minutes. Max timeframe currently is the daily (1440 minutes). Any value higher than 1440 will result in no plot.
Examples:
Daily 50 EMA plotted on 4H chart
4H 50 EMA and Daily 50 EMA plotted on 1H chart
Can also work in reverse if needed.
Example, Daily 50 EMA plotted on Weekly Chart
Price vs VolImproved version of OBV/price (this one actually works)
Both lines show where price is going relative to volume metrics (one line uses OBV, the other uses accumulation/distribution).
Green and above 50 means price is rising faster then buying volume
Red and below 50 means price is falling faster then selling volume
you can add smoothing in the controls and color will go according to raw (even if smoothing goes above/below 50)
under the hood: changes price, OBV and AD to RSI for comparability, calculates the difference between price and the others, then an RSI on the result to create an <50< style indicator.
this script replaces the previouse from:
Fat Tony's Composite Momentum Histogram (v01)Fat Tony's Composite Momentum Histogram (v01)
Overview
Fat Tony's Composite Momentum Histogram (v01) is a sophisticated momentum oscillator that combines four powerful technical analysis components into a single, unified signal. Unlike traditional single-indicator approaches, this tool synthesizes Williams %R, Stochastic, MACD Histogram, and Rate of Change to provide a comprehensive view of momentum across multiple timeframes and calculation methods.
The indicator displays as a histogram that oscillates between -150 and +150, with overbought/oversold zones clearly marked at +100/-100. When momentum crosses above the oversold level with sufficient volume, a green triangle appears below the histogram signaling a potential long entry. Conversely, when momentum crosses below the overbought level, a red triangle appears above signaling a potential short entry.
What Makes This Different
Multi-Component Synthesis: Rather than relying on a single momentum calculation, this indicator averages four complementary momentum measures, each capturing different aspects of price action:
Williams %R captures overbought/oversold conditions
Stochastic tracks momentum relative to recent price range
MACD Histogram shows trend strength and potential reversals
Rate of Change measures velocity of price movement, normalized by volatility
Intelligent Volume Weighting: The indicator amplifies signals when volume confirms the move. Recent volume is compared to a 20-bar average using a logarithmic scale, preventing extreme spikes from distorting the signal while still rewarding genuine volume-backed momentum.
Adaptive Normalization: The MACD component uses a 200-bar standard deviation to adaptively scale itself, ensuring the indicator remains responsive across different market conditions and volatility regimes.
Volume Filtering: Optional minimum volume threshold (5-bar average) prevents false signals during low-liquidity periods when price moves may not be meaningful.
Key Features
Composite Signal: Combines four momentum indicators into one cohesive oscillator
Volume Confirmation: Optional volume weighting amplifies signals backed by strong participation
Trend Filter: Optional EMA-200 filter to trade only with the dominant trend
Visual Clarity: Color-coded histogram (blue for positive, orange for negative, red/green at extremes)
Automatic Alerts: Built-in alerts for entry and exit signals
Customizable Thresholds: Adjust overbought/oversold levels to match your trading style
ROC Toggle: Enable/disable the Rate of Change component based on your preference
Debug Mode: View individual component plots for fine-tuning and validation
Settings & Customization
Momentum Settings
Length (default: 14): Primary calculation period for Williams %R and Stochastic
MACD Fast (default: 12): Fast EMA period for MACD calculation
MACD Slow (default: 26): Slow EMA period for MACD calculation
MACD Signal (default: 9): Signal line period for MACD
ROC Length (default: 10): Lookback period for Rate of Change calculation
MACD StDev Length (default: 200): Period for adaptive MACD normalization
Levels
Overbought Level (default: 100): Threshold for short signals
Oversold Level (default: -100): Threshold for long signals
Volume Settings
Enable Volume Weighting (default: ON): Amplifies signals when volume confirms
Volume Sensitivity (default: 1.5): Controls strength of volume impact (0.5-3.0)
Min Avg Volume (default: 50,000): Minimum 5-bar average volume to trigger signals
Components
Include ROC Component (default: ON): Adds Rate of Change to the composite
Enable Trend Filter (default: OFF): Only signals aligned with EMA-200 trend
Show Component Plots (default: OFF): Display individual components for analysis
How to Use
Basic Signal Interpretation:
Green triangle below histogram = Long signal (momentum crossing up through oversold)
Red triangle above histogram = Short signal (momentum crossing down through overbought)
Histogram color indicates momentum direction and strength
Background shading highlights extreme overbought/oversold zones
Entry Strategy:
Wait for the histogram to enter oversold territory (below -100) for longs, or overbought (above +100) for shorts
Look for the entry signal (triangle) when momentum crosses back through the threshold
Confirm the signal occurs with adequate volume (if volume filter is enabled)
Consider the trend filter if trading with the dominant direction only
Exit Strategy:
Optional exit signals appear when momentum crosses the zero line against your position
Consider taking profits at extreme opposite readings (e.g., long exit when reaching +100)
Use price action, support/resistance, or your own risk management for final exits
Fine-Tuning:
Shorter Length settings (8-10): More responsive, more signals, potentially more noise
Longer Length settings (18-21): Smoother signals, fewer false positives, slower response
Higher Volume Sensitivity: Requires stronger volume confirmation
Lower Overbought/Oversold Levels (±80): More frequent signals
Enable Trend Filter: Reduces signals but improves win rate by trading with trend
Best Practices
Combine with Price Action: Use this indicator to confirm what you're seeing on the price chart, not as a standalone system
Respect the Volume Filter: Low-volume signals are often false moves; the volume confirmation is there for a reason
Don't Chase: Wait for signals at extreme levels; entries in the middle zone tend to whipsaw
Use Multiple Timeframes: Check that momentum aligns across your trading timeframe and a higher timeframe
Backtest Your Settings: Default parameters work well on many instruments, but optimization for your specific market and timeframe can improve results
Technical Details
The indicator normalizes each component to a -50 to +50 range before averaging, ensuring equal weighting regardless of the raw scale differences between Williams %R, Stochastic, MACD, and ROC. The MACD component uses a hyperbolic tangent function for smooth, bounded normalization. Volume weighting applies a logarithmic scale to prevent extreme outliers from dominating the calculation while still capturing genuine volume surges.
[FS] Pivot Measurements# Pivot Measurements
An advanced TradingView indicator that combines LuxAlgo's pivot point detection algorithm with automatic measurement calculations between consecutive pivots.
## Features
### Pivot Detection
- **Regular Pivots**: Detects standard pivot highs and lows using configurable pivot length
- **Missed Pivots**: Identifies missed reversal levels that occurred between regular pivots
- **Visual Indicators**:
- Regular pivot highs: Red downward triangle (▼)
- Regular pivot lows: Teal upward triangle (▲)
- Missed pivots: Ghost emoji (👻)
- **Zigzag Lines**: Connects pivots with colored lines (solid for regular, dashed for missed)
- **Ghost Levels**: Horizontal lines indicating missed pivot levels
### Measurement System
- **Automatic Measurements**: Calculates price movements between consecutive pivots
- **Visual Display**:
- Transparent colored boxes (blue for upward, red for downward movements)
- Measurement labels showing:
- Price change (absolute and percentage)
- Duration (bars, days, hours, minutes)
- Volume approximation
- **Smart Positioning**: Labels positioned outside boxes (above for upward, below for downward)
- **Color Coding**: Blue for positive movements, red for negative movements
## Parameters
### Pivot Detection
- **Pivot Length** (default: 50): Number of bars on each side to identify a pivot point
- **Regular Pivots**: Toggle and colors for regular pivot highs and lows
- **Missed Pivots**: Toggle and colors for missed pivot detection
### Measurements
- **Number of Measurements** (1-10, default: 10): Maximum number of measurements to display
- **Show Measurement Boxes**: Toggle to show/hide measurement boxes and labels
- **Box Transparency** (0-100, default: 90): Transparency level for measurement boxes
- **Border Transparency** (0-100, default: 50): Transparency level for box borders
- **Label Background Transparency** (0-100, default: 30): Transparency level for label backgrounds
- **Label Size**: Size of measurement labels (tiny, small, normal, large)
## Usage
1. Add the indicator to your chart
2. Configure the **Pivot Length** based on your timeframe:
- Lower values for shorter timeframes (e.g., 10-20 for 1-5 min)
- Higher values for longer timeframes (e.g., 50-100 for daily)
3. Adjust pivot colors and visibility as needed
4. Customize measurement display settings:
- Set the number of measurements to display
- Adjust transparency levels for boxes, borders, and labels
- Choose label size
## Technical Details
- **Pine Script Version**: v6
- **Pivot Detection**: Based on () algorithm for detecting regular and missed pivots
- **Measurement Calculation**:
- Measures between consecutive pivots (from most recent to older)
- Calculates price change, percentage change, duration, and approximate volume
- Automatically sorts pivots chronologically
- **Performance**: Optimized with helper functions to reduce code duplication
## Notes
- The indicator automatically limits the number of stored pivots to optimize performance
- Measurements are only created when there are at least 2 pivots detected
- All measurements are recalculated on each bar update
- The indicator uses `max_bars_back=5000` to ensure sufficient historical data
## License
This indicator uses LuxAlgo's pivot detection algorithm from (). Please refer to the original LuxAlgo license for pivot detection components.
BAY Technical Indicators//@version=5
indicator("BAY Technical Indicators", overlay=true)
// Price source
price = close
// VWAP
vwap = ta.vwap
plot(vwap, title="VWAP", color=color.blue, linewidth=2)
// SMMA (RMA) 20 and 50
smma20 = ta.rma(price, 20)
smma50 = ta.rma(price, 50)
plot(smma20, title="SMMA 20", color=color.lime)
plot(smma50, title="SMMA 50", color=color.purple)
// EMA 9 and 21
ema9 = ta.ema(price, 9)
ema21 = ta.ema(price, 21)
plot(ema9, title="EMA 9", color=color.white)
plot(ema21, title="EMA 21", color=color.red)
// MA 200
ma200 = ta.sma(price, 200)
plot(ma200, title="MA 200", color=color.orange, linewidth=2)
// SMA 325 (Dark Green)
sma325 = ta.sma(price, 325)
plot(sma325, title="SMA 325", color=color.new(color.green, 0)) // Dark green
// Volume SMA 9 (plotted in data window only)
volume_sma9 = ta.sma(volume, 9)
plot(volume_sma9, title="Volume SMA 9", color=color.fuchsia, linewidth=1, display=display.data_window)
AG Pro Crypto Screener & Signal Dashboard🚀 OVERVIEW
Welcome to the AG Pro Crypto Screener & Signal Dashboard, an institutional-grade scanner designed to find high-probability buy opportunities in the chaotic crypto market. This powerful tool is being offered completely free as an introduction to the precision and performance of the exclusive AG Pro series.
Tired of manually flipping through dozens of charts? This dashboard is your new command center. It simultaneously scans up to 40 crypto assets against a robust, multi-filter strategy. It filters out the noise and delivers a clean, actionable list of symbols that are showing combined signs of strength, momentum, and a confirmed uptrend.
🧠 THE CORE STRATEGY: A Multi-Filter Confluence
This screener doesn't rely on a single, weak indicator. A symbol only appears on the "Buy List" if it passes a strict, user-configurable set of confluence filters:
Bullish EMA Crossover: Confirms a new, bullish shift in short-term momentum by looking for a recent crossover of a Fast EMA over a Slow EMA (e.g., 20/50). The "Freshness" feature ensures the signal is recent.
RSI Momentum Filter: Ensures the asset has strong buying momentum. The signal is only valid if the RSI is above a specified level (e.g., > 50).
Long-Term Trend Filter: This is the most critical filter. It keeps you on the right side of the market by confirming the price is above a key long-term Moving Average (e.g., SMA 50, 100, 200). You trade with the trend, not against it.
MACD Crossover (Optional): For traders who want an extra layer of confirmation, you can enable a filter to check for a bullish MACD crossover.
Only when all selected conditions are met does the asset appear on your dashboard. This multi-layered approach is designed to find quality over quantity.
✨ KEY FEATURES
Dynamic 40-Symbol Scanner: Monitor your entire watchlist (up to 40 symbols) from a single chart.
Professional Signal Dashboard: A clean, sortable table displaying all active signals, last price, RSI value, and volume.
"Freshness" & "Trend" Icons: Instantly gauge signal quality.
Freshness: See how many bars ago the signal appeared (🔥 Hot / ❇️ Fresh / ⏳ Old).
Trend: A clear visual icon shows if the asset is in a long-term uptrend (🔼) or downtrend (🔽).
NEW Signal Alerts: Don't miss an opportunity. Set an alert to be notified only when a new symbol appears on the list. This non-intrusive system avoids constant, repetitive alerts.
Fully Customizable Strategy: You are in control.
Toggle any of the four main filters (EMA, RSI, Trend, MACD) on or off.
Adjust all indicator lengths (EMAs, RSI, MACD, and Trend MA) to fit your trading style.
Reliable "On-Close" Signaling: Includes an option to generate signals only on bar close, ensuring high-quality, non-repainting signals.
Clean UI: Adjustable table text size ("Tiny", "Small", "Normal", "Large") for perfect visibility on any setup.
💎 THE AG PRO DIFFERENCE
This free screener is just the beginning. It's a demonstration of the stable, high-performance, and results-driven philosophy that defines the AG Pro brand.
We believe in empowering traders with tools that provide a clear, statistical edge. While this screener is powerful, our private, premium AG Pro scripts (such as the AG Pro Trading Suite) offer a complete, institutional-grade solution for serious traders. These advanced tools feature predictive models, proprietary signal algorithms, and comprehensive risk management modules that are the result of years of professional development.
If you find value in this free tool, imagine what our full suite can do for your trading. We invite you to experience the next level of trading precision.
🛠️ HOW TO USE
Add the "🏆 AG Pro Crypto Screener & Signal Dashboard V3" to your chart.
Open the indicator's Settings.
Under the "Symbol List to Scan" tab, replace the default symbols with your own 40 preferred assets (e.g., "BINANCE:BTCUSDT", "BINANCE:ETHUSDT", "COINBASE:SOLUSD").
Under the "Filter Settings" tab, configure your desired strategy. You can start with the defaults or customize them.
(Recommended) Right-click the table and select "Create Alert". Choose the "NEW BUY" condition and "Once Per Bar Close" to be notified of new signals.
⚠️ DISCLAIMER
This script is provided for informational and educational purposes only. It does not constitute financial or investment advice. All trading involves significant risk, and past performance is not indicative of future results. Please conduct your own research and implement your own risk management strategy before making any trading decisions.
0DTE Options - Iron Condor & ButterflyTo help options traders:
Plan and structure Iron Condor or Butterfly spreads in “Setup Mode.”
Track live trades, including P&L, breach risk, and strike distances, in “Live Mode.”
Visualize the trade on the price chart with profit zones, breakeven lines, strike markers, and alerts.
Evaluate market conditions using IV Rank, ATR-based range modeling, and modeled Delta approximation.
Essentially, it turns your TradingView chart into an options risk graph + planning terminal.
⚙️ Core Modes of Operation
🧱 1. Setup Mode
Used for planning new trades. It automatically suggests strikes based on:
ATR (volatility proxy)
IV Rank
Target Delta
Chosen risk tier (High / Mid / Low / Delta)
You can:
Preview recommended short and long strikes.
See estimated credit, width, and risk/reward ratios in a setup table.
Auto-feed these calculated strikes into the Live Mode to track them later.
Example Use:
Before market open, choose Setup Mode → Mid Risk Tier → see what strike widths and credits make sense for the day.
📈 2. Live Mode
Used to track real trades you’ve already opened.
You can:
Paste your real trade data (strikes, credits, etc.) into the 📋 paste field.
Or auto-feed from Setup Mode (if “Auto-Feed” is enabled).
The indicator then plots:
Short/long strikes
Breakevens
Profit/loss zone
Real-time breach detection and delta drift
Alerts when price nears your strikes or exits your safe zone.
Example Use:
After opening an Iron Condor on SPX, paste in 626,628,620,618,1.20,1, and the chart visually shows your safe range and warning zones.
🧮 Built-In Calculations
1. IV Rank (Volatility Environment)
Uses a 20-day log return volatility model to calculate IV Rank (percentile of volatility over the last 252 bars).
You can use this automatically or manually override it if you have data from your broker.
→ High IV Rank (>50) = better for selling Iron Condors (more premium).
2. ATR (Average True Range)
Measures short-term volatility to estimate expected daily price movement.
Used in Setup Mode to model distance between strikes.
3. Strike Calculations (Setup Mode)
Based on risk tier:
High Risk → wide wings, high credit, high potential drawdown
Mid Risk → balanced setup
Low Risk → narrow wings, safer but less credit
Delta Mode → based purely on target delta (e.g., 0.20)
Uses ATR × multiplier to determine how far short strikes should be from current price.
4. Credit Estimation
Based on strike width × IV Rank multiplier:
IV > 50 → 30% of width
IV 30–50 → 25%
IV < 30 → 20%
5. Profit & Loss Modeling
The indicator computes:
Max Profit:
Iron Condor → credit × 100 × contracts
Butterfly → (wing width − debit) × 100 × contracts
Max Loss:
Iron Condor → width − credit
Butterfly → debit × 100 × contracts
Breakevens:
Iron Condor → short strikes ± credit
Butterfly → body ± debit
Current P&L: Approximated by where the underlying is relative to the short/long strikes.
6. Delta Modeling
Estimates each short strike’s modeled delta based on how far it is from current price.
Displays total delta balance to show directional bias.
If Delta drifts too high → market imbalance → consider rolling or adjusting.
7. Breach Detection System
Automatically classifies your trade as:
🟢 In Range: Price between short strikes (safe zone).
🟠 Near Breach: Price close to short strike (risk zone).
🔴 Breached: Price outside long strike (stop or adjust zone).
This dynamically changes color in your profit box and info label.
🎨 Visual Components
Element Meaning Color
Red Line Put side strikes 🔻 Red
Green Line Call side strikes 🔺 Green
Yellow Dotted Lines Breakevens 🟡 Yellow
Green Box Profit zone 🟩 Light green
Orange Box Adjustment zone (near breach) 🟧 Orange
Red Box Breach zone 🟥 Red
White Line Current price ⚪ White
Optional labels display strike details and distances (e.g., “📉 Short Put: 620 – 5 pts away”).
📊 Setup Table (Setup Mode Only)
Displays a grid comparing all risk tiers:
Tier Short Call Short Put Width Est. Credit R:R
High 632 614 4.0 $1.20 0.43
Mid 630 616 3.0 $0.90 0.43
Low 628 618 2.0 $0.60 0.43
Highlighted row = selected risk tier.
This lets you compare how wide/narrow each setup is before committing to a trade.
🧾 Info Box (Live Mode)
Displays real-time stats such as:
🔶 IRON CONDOR | 1 Contract
📊 Calls: 626 / 628 | Puts: 620 / 618
💵 Credit: $1.20 | 💰 Profit: $120 | 🔴 Loss: $180
⬆️ BE: 627.2 | ⬇️ BE: 618.8
📍 Current: $623 | 💵 P&L: +$35.00 (+29.1%)
📏 To Short Call: 3 | To Short Put: 3
📊 Delta: 0.05 | IV Rank: 56% (FAVORABLE)
🔴 BREACH STATUS: In Range
🚨 Alerts
The indicator generates TradingView alerts for:
⚠️ Approaching Call Zone → nearing short call
⚠️ Approaching Put Zone → nearing short put
🛑 Stop Loss Triggered → current P&L exceeds loss threshold
🟠 Near Breach → price entering adjustment zone
🔴 Breached → price outside protection (long strikes)
These alerts can be used with TradingView notifications or webhooks.
🧠 How to Use It Step-by-Step
A. Planning (Setup Mode)
Set mode to “Setup.”
Adjust:
Risk Tier (High / Mid / Low / Delta)
Target Delta (0.15–0.30 recommended)
Strike Interval (e.g., 1.0 or 5.0)
Check Setup Table → see suggested strikes & credits.
Optionally toggle Auto-Feed → Live to send to live mode later.
B. Executing (Broker)
Confirm and enter your trade in your brokerage (use the strikes shown).
Record your strikes, net credit/debit, and number of contracts.
C. Tracking (Live Mode)
Switch to “Live” mode.
Paste your strikes in the 📋 Paste Data field:
Iron Condor Example: 626,628,620,618,1.20,1
Butterfly Example: 600,620,640,2.50,2
The chart updates:
Lines = your strikes
Boxes = profit/risk zones
Labels = strike info, distance to price
Info box = P&L, delta, IV rank, breach status
Set alerts for automatic notifications.
D. Managing the Trade
When the chart turns orange or red, you’re approaching or breaching a strike.
Use this signal to roll, hedge, or close your trade.
Monitor Gamma Risk: warning appears when price nears short strikes (explosive delta risk).
📌 Summary
Feature Description
Mode Switching Plan (Setup) or Track (Live)
IV Rank & ATR Modeling Estimates volatility environment
Auto Strike Planning Suggests strikes based on risk/delta
Visual Range Map Profit, breakeven, and adjustment zones
Real-Time Alerts Warns when nearing or breaching strikes
Trade Info Box Displays live risk, reward, delta, IV, and P&L
Setup Table Compares setups across risk tiers
Fully Configurable Works for Iron Condors or Butterflies
Iron Condor & Butterfly VisualizerIt helps you visualize and manage your option spread by:
Plotting strike prices and breakeven lines directly on the chart.
Showing profit/loss zones, adjustment zones, and alerts when price nears critical levels.
Calculating risk/reward, probability of profit, theta decay, IV condition, and trade score.
🎯 2. Inputs & Configuration
You input your trade details as a comma-separated string:
For an Iron Condor
ShortCall, LongCall, ShortPut, LongPut, Credit, Contracts, Target%
Example: 626,628,620,618,1.20,1,30
For a Butterfly Spread
LowerWing, Body, UpperWing, Debit, Contracts, Target%
Example: 600,620,640,2.50,2,50
The indicator automatically parses this and knows which strategy type you selected.
You can also control:
Visuals (profit zones, breakevens, labels)
Risk (stop loss %, adjustment zones)
Account/risk sizing
Market conditions (IV Rank, current IV, DTE)
⚙️ 3. Data Parsing & Strategy Recognition
The code reads your pasted string, splits it by commas, and determines:
Which strikes are short vs long (or wings/body for Butterfly)
Whether the strategy is credit (Iron Condor) or debit (Butterfly)
Calculates net credit/debit, contract size, and profit target
📈 4. Profit/Loss Calculations
It dynamically calculates:
Max Profit
Iron Condor: net credit × 100 × contracts
Butterfly: (wing width − debit) × 100 × contracts
Max Loss
Iron Condor: difference between strikes minus credit
Butterfly: debit × 100 × contracts
Breakeven points
Iron Condor: short strikes ± net credit
Butterfly: body ± debit
Current P&L relative to the live price (close).
⚖️ 5. Risk & Position Sizing
It checks:
Stop-loss trigger (% of max loss)
Adjustment alert if price nears short strikes
Recommended contract size based on account size and % risk per trade
Actual % of account at risk
⏱️ 6. Time Decay & IV Analysis
If you input days to expiration, it shows:
Theta (approx daily time decay)
Decay progress bar (% of 30-day cycle)
IV condition:
Green: favorable (>50 IV Rank)
Yellow: neutral (30–50)
Red: poor (<30)
🧮 7. Trade Scoring
It gives a Trade Score (0–100) based on:
IV Rank (favorable market)
Risk/Reward ratio
Probability of profit
Default 20 baseline points
This helps gauge whether the setup is statistically attractive.
🧠 8. Visualizations
When the indicator runs, it draws on your chart:
Lines
Red = short strikes
Orange dashed = long strikes
Yellow dotted = breakeven levels
Boxes
Green = profit zone
Orange shaded = adjustment zones (approaching danger)
Labels (optional)
Strike labels (call/put prices)
Info box summarizing:
Profit, loss, risk/reward
Breakevens, theta, target, gamma risk flag
🚨 9. Alerts
The script triggers TradingView alerts when:
Price nears call or put adjustment zones
Profit target is hit
Stop loss is hit
These help you manage the trade without constant monitoring.
🧭 10. In Practice
You’d:
Copy the option strikes and trade details from your broker or analyzer.
Paste them into 📋 PASTE YOUR TRADE DATA HERE.
The indicator plots:
Profit/loss region
Adjustment warnings
Key metrics
Alerts if your trade is in danger or near target.
Is it Time for a Pullback? Check Bars Since MA TestAn old market adage declares that “prices never move in a straight line.” Dips occur even in bullish markets. But how can traders know when prices may be due for a pullback?
Today’s script tries to answer that question by asking how many bars have passed since a stock, index or other symbol has tested a given moving average. Long periods of time without touching a line such as the 50-day simple moving average, for example, could prompt traders to be more patient.
Bars Since MA Test counts how many bars have passed since prices touched or crossed the MA in question. The resulting value is plotted in a simple histogram. Users can set the MA length and type. By default, it uses the 50-day simple moving average (SMA).
The chart above applies Bars Since MA Test to the S&P 500. It shows that the index has gone 129 bars without testing its 50-day SMA. That’s the longest since a 146-bar stretch between July 2006 and February 2007.
Other longer runs include January-August 1995 (156 bars), November 1960-June 1961 (144 bars) and April-November 1958 (158 bars).
Given the small number of comparable readings, could traders suspect the current advance is getting long in the tooth?
TradeStation has, for decades, advanced the trading industry, providing access to stocks, options and futures. If you're born to trade, we could be for you. See our Overview for more.
Past performance, whether actual or indicated by historical tests of strategies, is no guarantee of future performance or success. There is a possibility that you may sustain a loss equal to or greater than your entire investment regardless of which asset class you trade (equities, options or futures); therefore, you should not invest or risk money that you cannot afford to lose. Online trading is not suitable for all investors. View the document titled Characteristics and Risks of Standardized Options at www.TradeStation.com . Before trading any asset class, customers must read the relevant risk disclosure statements on www.TradeStation.com . System access and trade placement and execution may be delayed or fail due to market volatility and volume, quote delays, system and software errors, Internet traffic, outages and other factors.
Securities and futures trading is offered to self-directed customers by TradeStation Securities, Inc., a broker-dealer registered with the Securities and Exchange Commission and a futures commission merchant licensed with the Commodity Futures Trading Commission). TradeStation Securities is a member of the Financial Industry Regulatory Authority, the National Futures Association, and a number of exchanges.
TradeStation Securities, Inc. and TradeStation Technologies, Inc. are each wholly owned subsidiaries of TradeStation Group, Inc., both operating, and providing products and services, under the TradeStation brand and trademark. When applying for, or purchasing, accounts, subscriptions, products and services, it is important that you know which company you will be dealing with. Visit www.TradeStation.com for further important information explaining what this means.
