3 Linear Regression CurveFast 3LRC - 15/30/60 standard settings - 15/30 give a lot of noise, but give you a some time to prepare for the 60 to flip
在腳本中搜尋"股票开盘前15分钟交易规则"
Noro's OverCloud v1.2 MTFAdded big timeframe
MN = 1 month
W = 1 week
D = 1 day
240 = 4 hours
180 = 3 hours
120 = 2 hours
60 = 1 hours
30 = 30 min
15 = 15 min
etc...
Fractal Resonance BarLazyBear's WaveTrend port has been praised for highlighting trend reversals with precision and punctuality (minimal lag). But strong "3rd Wave" trends can "embed" or saturate any oscillator flashing several premature crosses while stuck overbought/oversold. This happens when the trend stretches over a longer timescale than the oscillator's averaging window or filter time constant. Our solution: monitor many timescales. With Fractal Resonance Bar's rich color codings, strong wavefronts form across timescales and jump out like an approaching line of thunderclouds!
Fractal Resonance Bar color-codes the status of eight underlying stochastic oscillators, with each row averaging over twice the time of the row above.
Fractal Resonance Bar shifts its timescales along with your choice of main chart timescale:
1 minute chart: 1 minute through 128 minute (~2 hour) oscillators.
15 minute chart: 15 minute through 1920 minute (~32 hour) oscillators.
1 hour chart: 1 hour through 128 hour (~2 week) oscillators.
Daily chart: 1 day through 128 day (~4 month) oscillators.
The color map is configured as follows:
Hot Pink: Extreme Overbought (> 100%) rolled over to sell, but oscillators probably embedded with more upside (revert to Dark Green) possible after a pause.
Deep Red: Overbought (> 75%) crossover ripe for selling (validated when red spreads to timescales below).
Brown: Minor (< 75%) crossover sell from which could bounce back green or start a plunge toward gray/black.
Gray/Black: Mature (< -75%) sells turning full black in a plunge before the dawn.
Lime Green: Extreme Oversold (< -100%) and bouncing, though may yet bottom even lower.
Green: Oversold (< -75%) crossover ripe for buy. Green spreading to all timescales below will validate bottom is in.
Dark Green/Teal: Mature buy in overbought (> 75%) range, waiting for sell crossover to Hot Pink for a pause or correction.
White Stripes are Impulsive Trend Warning
Fractal Resonance Bar warns of oscillator embedding by showing white stripes when it detects strong, early surges in the timescale rows below.The white stripes usually accompany Hot Pink warning it's too early to go short, or Lime Green warning it's too early to go long.
Heeding these warnings will probably miss the exact top or bottom, but you're less likely to get overrun in a momentum move.
Usually the market gives us a second opportunity to short very close to the top or buy very close to the bottom after the warning white stripes have subsided.
NOTE: Recently rolled over Futures contracts may not have enough history for all oscillator calculations, in which case no bar colors will appear.
Tweakable Attributes
The default Channel Length, Stochastic Ratio Length and Lag Length work reasonably well on all timescales in our experience. Minor tweaks don't hurt but this may just overfit to a particular chart history.
We don't recommend changing the 75% Overbought and 100% Extreme Overbought default levels as these are ideal numbers relative to the underlying oscillator statistic calculations. But these settings can shift the color transition levels.
Embedded attribute controls the sensitivity/conservativeness of the white strip embedding detectors. Closer to 75 increases the warning sensitivity while closer to 100 decreases the aggressiveness of blocking white stripes.
Embed Separation also affects the white stripe sensitivity.
Row width increases each row's thickness to fill the available screen height you've afforded the bar.
Trend and Entry CCI ST15This is a T3 CCI with a fast and slow line as well as extreme lines, a -15,15 filter to make zero line rejections and crosses more mechanical and help weed out whipsaw. I will probably update description in the future and get into more detail about how the indicator is used but for now if you want more info look up woodie CCI patterns :) Good Luck!!
extended session - Regular Opening-Range- JayyOpening Range and some other scripts updated to plot correctly (see comments below.) There are three variations of the fibonacci expansion beyond the opening range and retracements within the opening range of the US Market session - I have not put in the script for the other markets yet.
The three scripts have different uses and strengths:
The extended session script (with the script here below) will plot the opening range whether you are using the extended session or the regular session. (that is to say whether "ext" in the lower right hand corner is highlighted or not.). While in the extended session the opening range has some plotting issues with periods like 13 minutes or any period that is not divisible into 330 mins with a round number outcome (eg 330/60 =5.5. Therefore an hour long opening range has problems in the extended session.
The pre session script is only for the premarket. You can select any opening range period you like. I have set the opening range to be the full premarket session. If you select a different session you will have to unselect "pre open to 9:30 EST for Opening Range?" in the format section. The script defaults to 15 minutes in the "period Of Pre Opening Range?". To go back to the 4 am to 9:30 pre opening range select "pre open to 9:30 EST for Opening Range?" there is no automatic 330 minute selection.
The past days offset script only works in 5 min or 15 minute period. It will show the opening range from up to 20 days past over the current days price action. Use this for the regular session only. 0 shows the current day's opening range. Use the positive integers for number of days back ie 1, 2, 3 etc not -1, -2, -3 etc. The script is preprogrammed to use the current day (0).
Scripts updated to plot correctly: One thing they all have in common is a way of they deal with a somewhat random problem that shifts the plots 4 hours in one direction or the other ie the plot started at 9:30 EST or 1:30PM EST. This issue started to occur approximately June 22, 2015 and impacts any script that tried to use "session" times to manage a plot in my scripts. The issue now seems to have been resolved during this past week.
Just in case the problem reoccurs I have added a "Switch session plot?" to each script. If the plot looks funny check or uncheck the "Switch session plot?" and see the difference. Of course if a new issue crops up it will likely require a different fix.
I have updated all of the scripts shown on this chart. If you are using a script of mine that suffers from the compiler issue then you will find an update on this chart. You can get any and all of the scripts by clicking on the small sideways wishbone on the left middle of the chart. You will see a dialogue box. Then click "make it mine". This will import all of the scripts to your computer and you can play around with them all to decide what you want and what you don't want. This is the easiest way to get all of the scripts in one fell swoop. It is also the easiest way for me to make all of the scripts available. I do not have all of the plots visible since it is too messy and one of the scripts (pre OR) is only for the regular session. To view the scripts click on the blue eye to the right of the script title to show it on this script. If you can only use the regular session. The scripts will all (with the exception of the pre OR) work fine.
If for any reason this script seems flakey refresh the page r try a slightly different period. I have noticed that sometimes randomly the script loves to return to the 5 min OR. This is a very new issue transient issue. As always if you see an issue please let me know.
Cheers Jayy
BB 100 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 25 with Barcolors".
BB 25 with Barcolors6/19/15 I added confirmation highlight bars to the code. In other words, if a candle bounced off the lower Bollinger band, it needed one more close above the previous candle to confirm a higher probability that a change in investor sentiment has reversed. Same is true for upper Bollinger band bounces. I also added confirmation highlight bars to the 100 sma (the basis). The idea is that lower and upper bands are potential points of support and resistance. The same is true of the basis if a trend is to continue. 6/28/15 I added a plotshape to identify closes above/below TLine. One thing this system points out is it operates best in a trend reversal. Consolidations will whipsaw the indicator too much. I have found that when this happens, if using daily candles, switch to hourly, 30 min, etc., to catch a better signal. Nothing moves in a straight line. As with any indicator, it is a tool to be used in conjunction with the art AND science of trading. As always, try the indicator for a time so that you are comfortable enough to use real money. This is designed to be used with "BB 100 with Barcolors".
KK_Intraday MAsHey guys,
today I was browsing through intraday Charts looking at some moving averages. Basically what I wanted to see was whether the currency pair was trading below or above the moving average of the day/week/month. For a better understanding: The daily MA on a 15 minute Forex Chart would be the 96 MA.
I encountered the problem that i always had to change the settings for my MAs when changing the Time Interval, so I coded this here up. It is pretty simple but maybe somebody else has the same problem and can put it to use.
The script has some settings as listed below:
Choice which MAs to plot, (Daily, Weekly, Monthly)
Choice which type of MA to use (Simple, Exponential, Weighted)
Neccesary Settings for the correct calculation (e.g. Number of trading hours per day). These settings depend on the instrument you are using and should always be checked before using this script.
There are a few things to Note when using this script:
This script works for intraday charts only.
The monthly MA doesn't work on any Time Interval smaller than 15 minutes. Can't do anything about it unfortunately.
This is my first published Script, use it with caution and let me know what you think about it!
Opening Range Breakout with 2 Profit Targets.Opening Range Breakout with 2 Profit Targets.
Updated Indicator now works on all Symbols with Many Different Session Options.
***Known PineScript Issue…While the Opening Range is being Formed the lines only adjust for that individual bar. Just reset Indicator after Opening Range Completes.
***All Times are Based on New York Time
Session Options Forex U.S. Banks Open (8:00), Gold U.S. Open (8:20), Oil U.S. Open (9:00), U.S. Cash Session - Stocks (9:30), NY Forex Open (17:00) , Europe Open (02:00), or if you choose Setting 0 the Session Runs from 00:00 to 00:00 (Midnight to Midnight).
***Ability to use 60 minute Opening Range, 30 minute, 15 minute, and many other options.
***However you can manually change the times in the Inputs Tab to adjust for any session you prefer. This is useful for Day Light Savings Adjustments. Also the default times work if your charts are set to EST Time. If you use A different time zone in your settings you need to Adjust the times in the inputs tab.
Initially Opening Range High and Low plot as Yellow Lines. If Price Goes Above Opening Range then Line Turns Green. If Price Goes Below Opening Range Line Turns Red.
By default the First Profit Target is 1/2 the Width of the Opening Range and the 2nd Profit Target is 1 Times the Opening Range. However these are Adjustable in the Inputs Tab.
By Default the Opening Range Length is 1 Hour. However, you can Change the Opening Range Length to 15 min, 30 min, 2 hours etc. in the Inputs Tab.
Plots a 1 Above or Below Candle when 1st Profit Target is Achieved, and a 2 when 2nd Profit Target is Achieved.
Indicator: Trend Trigger FactorIntroduced by M.H.Pee, Trend Trigger Factor is designed to keep the trader trading with the trend.
System rules according to the developer:
* If the 15-day TTF is above 100 (indicating an uptrend), you will want to be in long positions.
* If the 15-day TTF is below -100, you will want to be short.
* If it is between -100 and 100, you should remain with the current position.
More info:
Original Article by Mr.Pee: drive.google.com
Smart Multi-Confirm Reversal DetectorHow the Smart Multi-Confirm Reversal Detector Works
The indicator works by analyzing candlestick patterns, trend, and technical confirmations and then scoring each bar to determine the strength of a potential reversal. Here’s the step-by-step logic:
Step 1: Analyze Candlestick Patterns
For each new candle, the indicator checks if any of the selected patterns occur:
Wick Reversal (Long Lower Wick):
Looks for candles with a small body and a long lower shadow.
Indicates buying pressure (potential bullish reversal).
Inverted Wick (Long Upper Wick):
Looks for candles with a small body and a long upper shadow.
Indicates selling pressure (potential bearish reversal).
Body Engulf:
The current candle completely “engulfs” the previous candle.
Signals a strong change in momentum.
Tweezer Patterns:
Two consecutive candles with almost identical highs or lows.
Suggests a potential reversal zone.
3-Bar Pattern:
Three consecutive bullish or bearish candles in a row.
Shows strong momentum continuation or exhaustion, used to confirm reversal.
Each pattern can be turned on/off by the user. If a pattern is detected, it contributes points to the overall signal score.
Step 2: Confirm Trend Direction
The indicator checks EMA trend alignment:
Fast EMA vs Slow EMA:
Fast EMA above Slow EMA → bullish trend.
Fast EMA below Slow EMA → bearish trend.
Optional Higher Timeframe EMA (HTF) Alignment:
Checks if the trend on a higher timeframe matches the current trend.
Adds extra weight to the signal if alignment is true.
This ensures the signal goes in the direction of the prevailing trend, reducing false signals.
Step 3: Check Technical Confirmations
Optional filters increase reliability:
ADX (Average Directional Index):
Measures the strength of the current trend.
Only strong trends contribute to the score.
RSI (Relative Strength Index):
Bullish confirmation: RSI is oversold.
Bearish confirmation: RSI is overbought.
Volume Spike:
Compares current volume to the average volume.
High volume validates the signal’s momentum.
Body Momentum:
Compares current candle’s body size to its average.
Larger than average body indicates stronger momentum.
Each of these confirmations can be enabled/disabled and has a weight in the scoring system.
Step 4: Calculate Score
Each pattern and confirmation has a user-defined weight (0–100).
The indicator sums the active weights that pass conditions and normalizes to 100.
Example:
Wick Reversal detected → 30 points
Trend EMA confirmed → 15 points
ADX confirmed → 10 points
Score = 55/100 → may or may not trigger a signal depending on threshold.
Score Threshold:
Only bars above the user-defined threshold are considered a confirmed signal.
Bars above a lower “label threshold” still show a label, even if not strong enough for alerts.
Step 5: Visualize Signals
Bullish Signals: Green triangle below the candle.
Bearish Signals: Red triangle above the candle.
Labels: Show the type of pattern and the score.
Purpose: Quickly identify potential reversals and assess their strength visually.
Step 6: Optional Alerts
Fixed alert messages can be enabled for confirmed bullish or bearish signals.
Alerts do not recommend trades; they just notify you of pattern confirmations.
Complies with TradingView’s policy for safe alert use.
Step 7: Weighted Decision
The final decision is not binary.
Instead, the indicator combines multiple signals into a score, so stronger signals are more reliable.
This reduces false positives and gives traders a professional, multi-confirmation approach to detect potential reversals.
Gamma Blast StrategyGamma Blast Strategy used for quick 2-5 ticks on Buys, but on a sideways market can get up to 15-20 ticks.
Moon Scalper v3 + VSAMoon Scalper v3 is a high-precision scalping indicator optimized for the 15-minute chart. It delivers clean buy/sell signals with TP1 (1:1 risk-reward) exits using layered confirmations:
• **Volatility Bands** — SMA + multiplier detect expansion zones
• **EMA Filter (200)** — ensures trades align with trend
• **RSI Range Filter** — avoids extreme overbought/oversold traps (buy: 52–62, sell: 38–48)
• **Volume Spike Filter** — filters for institutional activity (vol > 1.4×SMA)
• **VSA Confirmation** — requires wide-spread, high-volume bars with reclaim (volume × 1.4, spread × 1.5, reclaim 50%)
**Usage Notes:**
Best used on 15m timeframe for liquid pairs (e.g., BTCUSDT, ETHUSDT). Signals appear as “BUY” / “SELL” labels on chart. Defaults yield high TP1 hit rate; use only during active sessions (e.g., London/NY) for best accuracy.
**Disclaimer:**
This indicator is for educational purposes only. Past performance is not a guarantee of future results. Always backtest before live trading and manage risk responsibly.
J12Matic Builder by galgoomA flexible Renko/tick strategy that lets you choose between two entry engines (Multi-Source 3-way or QBand+Moneyball), with a unified trailing/TP exit engine, NY-time trading windows with auto-flatten, daily profit/loss and trade-count limits (HALT mode), and clean webhook routing using {{strategy.order.alert_message}}.
Highlights
Two entry engines
Multi-Source (3): up to three long/short sources with Single / Dual / Triple logic and optional lookback.
QBand + Moneyball: Gate → Trigger workflow with timing windows, OR/AND trigger modes, per-window caps, optional same-bar fire.
Unified exit engine: Trailing by Bricks or Ticks, plus optional static TP/SL.
Session control (NY time): Evening / Overnight / NY Session windows; auto-flatten at end of any enabled window.
Day controls: Profit/Loss (USD) and Trade-count limits. When hit, strategy HALTS new entries, shows an on-chart label/background.
Alert routing designed for webhooks: Every order sets alert_message= so you can run alerts with:
Condition: this strategy
Notify on: Order fills only
Message: {{strategy.order.alert_message}}
Default JSONs or Custom payloads: If a Custom field is blank, a sensible default JSON is sent. Fill a field to override.
How to set up alerts (the 15-second version)
Create a TradingView alert with this strategy as Condition.
Notify on: Order fills only.
Message: {{strategy.order.alert_message}} (exactly).
If you want your own payloads, paste them into Inputs → 08) Custom Alert Payloads.
Leave blank → the strategy sends a default JSON.
Fill in → your text is sent as-is.
Note: Anything you type into the alert dialog’s Message box is ignored except the {{strategy.order.alert_message}} token, which forwards the payload supplied by the strategy at order time.
Publishing notes / best practices
Renko users: Make sure “Renko Brick Size” in Inputs matches your chart’s brick size exactly.
Ticks vs Bricks: Exit distances switch instantly when you toggle Exit Units.
Same-bar flips: If enabled, a new opposite signal will first close the open trade (with its exit payload), then enter the new side.
HALT mode: When day profit/loss limit or trade-count limit triggers, new entries are blocked for the rest of the session day. You’ll see a label and a soft background tint.
Session end flatten: Auto-closes positions at window ends; these exits use the “End of Session Window Exit” payload.
Bar magnifier: Strategy is configured for on-close execution; you can enable Bar Magnifier in Properties if needed.
Default JSONs (used when a Custom field is empty)
Open: {"event":"open","side":"long|short","symbol":""}
Close: {"event":"close","side":"long|short|flat","reason":"tp|sl|flip|session|limit_profit|limit_loss","symbol":""}
You can paste any text/JSON into the Custom fields; it will be forwarded as-is when that event occurs.
Input sections — user guide
01) Entries & Signals
Entry Logic: Choose Multi-Source (3) or QBand + Moneyball (pick one).
Enable Long/Short Signals: Master on/off switches for entering long/short.
Flip on opposite signal: If enabled, a new opposite signal will close the current position first, then open the other side.
Signal Logic (Multi-Source):
Single: any 1 of the 3 sources > 0
Dual: Source1 AND Source2 > 0
Triple (default): 1 AND 2 AND 3 > 0
Long/Short Signal Sources 1–3: Provide up to three series (often indicators). A positive value (> 0) is treated as a “pulse”.
Use Lookback: Keeps a source “true” for N bars after it pulses (helps catch late triggers).
Long/Short Lookback (bars): How many bars to remember that pulse.
01b) QBands + Moneyball (Gate -> Trigger)
Allow same-bar Gate->Trigger: If ON, a trigger can fire on the same bar as the gate pulse.
Trigger must fire within N bars after Gate: Size of the gate window (in bars).
Max signals per window (0 = unlimited): Cap the number of entries allowed while a gate window is open.
Buy/Sell Source 1 – Gate: Gate pulse sources that open the buy/sell window (often a regime/zone, e.g., QBands bull/bear).
Trigger Pulse Mode (Buy/Sell): How to detect a trigger pulse from the trigger sources (Change / Appear / Rise>0 / Fall<0).
Trigger A/B sources + Extend Bars: Primary/secondary triggers plus optional extension to persist their pulse for N bars.
Trigger Mode: Pick S2 only, S3 only, S2 OR S3, or S2 AND S3. AND mode remembers both pulses inside the window before firing.
02) Exit Units (Trailing/TP)
Exit Units: Choose Bricks (Renko) or Ticks. All distances below switch accordingly.
03) Tick-based Trailing / Stops (active when Exit Units = Ticks)
Initial SL (ticks): Starting stop distance from entry.
Start Trailing After (ticks): Start trailing once price moves this far in your favor.
Trailing Distance (ticks): Offset of the trailing stop from peak/trough once trailing begins.
Take Profit (ticks): Optional static TP distance.
Stop Loss (ticks): Optional static SL distance (overrides trailing if enabled).
04) Brick-based Trailing / Stops (active when Exit Units = Bricks)
Renko Brick Size: Must match your chart’s brick size.
Initial SL / Start Trailing After / Trailing Distance (bricks): Same definitions as tick mode, measured in bricks.
Take Profit / Stop Loss (bricks): Optional static distances.
05) TP / SL Switch
Enable Static Take Profit: If ON, closes the trade at the fixed TP distance.
Enable Static Stop Loss (Overrides Trailing): If ON, trailing is disabled and a fixed SL is used.
06) Trading Windows (NY time)
Use Trading Windows: Master toggle for all windows.
Evening / Overnight / NY Session: Define each session in NY time.
Flatten at End of : Auto-close any open position when a window ends (sends the Session Exit payload).
07) Day Controls & Limits
Enable Profit Limits / Profit Limit (Dollars): When daily net PnL ≥ limit → auto-flatten and HALT.
Enable Loss Limits / Loss Limit (Dollars): When daily net PnL ≤ −limit → auto-flatten and HALT.
Enable Trade Count Limits / Number of Trades Allowed: After N entries, HALT new entries (does not auto-flatten).
On-chart HUD: A label and soft background tint appear when HALTED; a compact status table shows Day PnL, trade count, and mode.
08) Custom Alert Payloads (used as strategy.order.alert_message)
Long/Short Entry: Payload sent on entries (if blank, a default open JSON is sent).
Regular Long/Short Exit: Payload sent on closes from SL/TP/flip (if blank, a default close JSON is sent).
End of Session Window Exit: Payload sent when any enabled window ends and positions are flattened.
Profit/Loss/Trade Limit Close: Payload sent when daily profit/loss limit causes auto-flatten.
Tip: Any tokens you include here are forwarded “as is”. If your downstream expects variables, do the substitution on the receiver side.
Known limitations
No bracket orders from Pine: This strategy doesn’t create OCO/attached brackets on the broker; it simulates exits with strategy logic and forwards your payloads for external automation.
alert_message is per order only: Alerts fire on order events. General status pings aren’t sent unless you wire a separate indicator/alert.
Renko specifics: Backtests on synthetic Renko can differ from live execution. Always forward-test on your instrument and settings.
Quick checklist before you publish
✅ Brick size in Inputs matches your Renko chart
✅ Exit Units set to Bricks or Ticks as you intend
✅ Day limits/Windows toggled as you want
✅ Custom payloads filled (or leave blank to use defaults)
✅ Your alert uses Order fills only + {{strategy.order.alert_message}}
HSM KILLZONE//@version=5
indicator('HSM KILLZONE', 'HSM KILLZONE', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('New York AM', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0700-1100', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('New York PM', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('1300-1600', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('Asian Sesh', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('2000-0000', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string('London', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('0200-0500', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
HSM MACROS//@version=5
indicator('HSM MACROS', 'HSM MACROS', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('MC1', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0820-0830', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('MC2', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('0920-0930', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('MC3', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('0950-1010', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string('MC4', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('1050-1110', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
HSM BULLET//@version=5
indicator('HSM BULLET', 'HSM BULLET', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('London Silver', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0300-0400', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('NY AM Bullet', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('1000-1100', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('NY PM Bullet', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('1400-1500', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string(' ', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('1000-1000', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
Balanced Big Wicks (50/50) HighlighterThis open-source indicator highlights candles with balanced long wicks (50/50 style)—that is, candles where both upper and lower shadows are each at least 30–60% of the full range and within ~8% of each other, while retaining a substantial body. This specific structure often reflects indecision or liquidity sweeps and can precede strong breakout moves.
How It Works (Inputs and Logic)
Min wick % (each side): 30–60% of candle range
Max body %: up to 60% of range (preserves strong body presence)
Equality tolerance: wicks within 8% of each other
ATR filter (multiples of ATR14): ensures only significant-range candles are flagged
When a “50/50” candle forms, it’s visually colored and labeled; audibly alertable.
How to Use It
Long setup: price closes above the wick-high → potential long entry (SL below wick-low, TP = 1:1).
Short setup: price closes below wick-low → potential short entry (SL above wick-high, TP = 1:1).
Especially effective on 5–15 minute scalping charts when aligned with high-volume sessions or HTF trend context.
Why This Indicator Is Unique
Unlike standard wick or doji voters, this script specifically filters for candles with a strong body and symmetrical wicks, paired with a range filter, reducing noise significantly.
Important Notes
No unrealistic claims: backtested setups indicate high occurrence of clean breakouts, though performance depends on market structure.
Script built responsibly: uses real-time calculations only, no future-data lookahead.
Visuals on the published chart reflect default input values exactly.
ADX with Custom Limit LineSimple ADX with Custom Threshold
A clean, educational ADX indicator that allows traders to set their own trend strength threshold.
Features:
- Customizable limit line for personalized trend analysis
- Color-coded ADX line based on trend strength
- Educational reference lines (15, 25, 40, 50)
- Background highlighting when above custom threshold
- Comprehensive alerts for trend changes
Perfect for traders who want a simple but effective tool to assess trend strength without complexity.
This indicator helps understand:
- When trends are strong enough to trade
- How to interpret ADX readings
- Optimal entry/exit timing based on trend strength
Educational and straightforward - ideal for both beginners and experienced traders.
⚠️ RISK DISCLAIMER:
This indicator is for educational purposes only and does not constitute financial advice.
Trading involves significant risk of loss. Always do your own research and consider
consulting with a qualified financial advisor before making trading decisions.
GMMA ABC Signal Goal (one-liner)
Detect trend-aligned entries using an 18-EMA GMMA stack, then filter out chop with momentum (ATR), trend strength (ADX/RSI), and a tight-range (“box”) mute. Auto-draw SL/TP and fire alerts.
1) Core inputs & idea
Three entry archetypes
Type A (Structure break in a tight bundle): GMMA is narrow → price breaks prior swing with correct bull/bear sequence.
Type B (Trend continuation): Price crosses many EMAs with body and short>mid (bull) or short midAvg, close > longAvg, candle pass.
Short: red body, crossBodyDown ≥ bodyThresh, shortAvg < midAvg, close < longAvg, candle pass.
Anti-chop add-ons:
Require GMMA spread ≥ minSpreadB (trend sufficiently expanded).
ADX/RSI gate (configurable AND/OR and individual enable flags):
ADX ≥ adxMin_B
RSI ≥ rsiMinLong_B (long) or RSI ≤ rsiMaxShort_B (short)
Type C — momentum pop
Needs many crosses (crossUp / crossDown ≥ crossThresh) and a strong candle.
Has its own ATR body threshold: body ≥ ATR * atrMultC (separate from global).
6) Global “Box” (tight-range) mute
Look back boxLookback bars; if (highest−lowest)/close ≤ boxMaxPct, then mute all signals.
Prevents trading inside cramped ranges.
7) Signal priority + confirmation + cooldown
Compute raw A/B/C booleans.
Pick first valid in order A → B → C per side (long/short).
Apply:
Bar confirmation (confirmClose)
Cooldown (no new signal within cooldownBars after last)
Global box mute
Record bar index to enforce cooldown.
8) SL/TP logic (simple R-based scaffolding)
SL: previous swing extreme within structLookback (long uses prevLow, short uses prevHigh).
Risk R: distance from entry close to SL (min-tick protected).
TPs: TP1/TP2/TP3 = close ± R × (tp1R, tp2R, tp3R) depending on side.
On a new signal, draw lines for SL/TP1/TP2/TP3; keep them for keepBars then auto-delete.
9) Visuals & alerts
Plot labels for raw Type A/B/C (so you can see which bucket fired).
Entry label on the chosen signal with SL/TP prices.
Alerts: "ABC LONG/SHORT Entry" with ticker & timeframe placeholders.
10) Info panel (top-right)
Shows spread%, box%, ADX, RSI on the last/confirmed bar for quick situational awareness.
11) How to tune (quick heuristics)
Too many signals? Increase minSpreadB, adxMin_B, bodyThresh, or enable confirmClose and a small cooldownBars.
Missing breakouts? Lower atrMultC (Type C) or crossThresh; relax minSpreadB.
Choppy pairs/timeframes? Raise boxMaxPct sensitivity (smaller value mutes more), or raise atrMult (global) to demand fatter candles.
Cleaner trends only? Turn on strictSeq for Type A; raise minSpreadB and adxMin_B.
12) Mental model (TL;DR)
A = “Tight coil + fresh structure break”
B = “Established trend, strong continuation” (spread + ADX/RSI keep you out of chop)
C = “Momentum burst through many EMAs” (independent ATR gate)
Then add box mute, close confirmation, cooldown, and auto SL/TP scaffolding.
Pump/Dump Detector [Modular]//@version=5
indicator("Pump/Dump Detector ", overlay=true)
// ————— Inputs —————
risk_pct = input.float(1.0, "Risk %", minval=0.1)
capital = input.float(100000, "Capital")
stop_multiplier = input.float(1.5, "Stop Multiplier")
target_multiplier = input.float(2.0, "Target Multiplier")
volume_mult = input.float(2.0, "Volume Spike Multiplier")
rsi_low_thresh = input.int(15, "RSI Oversold Threshold")
rsi_high_thresh = input.int(85, "RSI Overbought Threshold")
rsi_len = input.int(2, "RSI Length")
bb_len = input.int(20, "BB Length")
bb_mult = input.float(2.0, "BB Multiplier")
atr_len = input.int(14, "ATR Length")
show_signals = input.bool(true, "Show Entry Signals")
use_orderflow = input.bool(true, "Use Order Flow Proxy")
use_ml_flag = input.bool(false, "Use ML Risk Flag")
use_session_filter = input.bool(true, "Use Volatility Sessions")
// ————— Symbol Filter (Optional) —————
symbol_nq = input.bool(true, "Enable NQ")
symbol_es = input.bool(true, "Enable ES")
symbol_gold = input.bool(true, "Enable Gold")
is_nq = str.contains(syminfo.ticker, "NQ")
is_es = str.contains(syminfo.ticker, "ES")
is_gold = str.contains(syminfo.ticker, "GC")
symbol_filter = (symbol_nq and is_nq) or (symbol_es and is_es) or (symbol_gold and is_gold)
// ————— Calculations —————
rsi = ta.rsi(close, rsi_len)
atr = ta.atr(atr_len)
basis = ta.sma(close, bb_len)
dev = bb_mult * ta.stdev(close, bb_len)
bb_upper = basis + dev
bb_lower = basis - dev
rolling_vol = ta.sma(volume, 20)
vol_spike = volume > volume_mult * rolling_vol
// ————— Session Filter (EST) —————
est_offset = -5
est_hour = (hour + est_offset + 24) % 24
session_filter = (est_hour >= 18 or est_hour < 6) or (est_hour >= 14 and est_hour < 17)
session_ok = not use_session_filter or session_filter
// ————— Order Flow Proxy —————
mfi = ta.mfi(close, 14)
buy_imbalance = ta.crossover(mfi, 50)
sell_imbalance = ta.crossunder(mfi, 50)
reversal_candle = close > open and close > ta.highest(close , 3)
// ————— ML Risk Flag (Placeholder) —————
ml_risk_flag = use_ml_flag and (ta.sma(close, 5) > ta.sma(close, 20))
// ————— Entry Conditions —————
long_cond = symbol_filter and session_ok and vol_spike and rsi < rsi_low_thresh and close < bb_lower and (not use_orderflow or (buy_imbalance and reversal_candle)) and (not use_ml_flag or ml_risk_flag)
short_cond = symbol_filter and session_ok and vol_spike and rsi > rsi_high_thresh and (not use_orderflow or sell_imbalance) and (not use_ml_flag or ml_risk_flag)
// ————— Position Sizing —————
risk_amt = capital * (risk_pct / 100)
position_size = risk_amt / atr
// ————— Plot Signals —————
plotshape(show_signals and long_cond, title="Long Signal", location=location.belowbar, color=color.green, style=shape.triangleup, size=size.small)
plotshape(show_signals and short_cond, title="Short Signal", location=location.abovebar, color=color.red, style=shape.triangledown, size=size.small)
// ————— Alerts —————
alertcondition(long_cond, title="Long Entry Alert", message="Pump fade detected: Long setup triggered")
alertcondition(short_cond, title="Short Entry Alert", message="Dump detected: Short setup triggered")
Intraday Scalping Trading System with AlertsThis is a unique script in the way it signals and alert on Volume Imbalances and VWAP based out on ATR. Many professional traders consider Volume Imbalance as a great indicator to identify stock movement.
I didn't find any indicator or all these option together so created one for us.
1. Fully controllable with toggle buttons.
2. Choose you best Trading directional signals with filters as per your sentiments -
2. EMA crossings
- EMA crossings + VWAP confirmation
- EMA crossings + SuperTrend Confirmation
3. Highest and Lowest volumes visually appeared
4. OHLCs Daily, Weekly and Monthly line options
5. First Candle Range - you can choose First candle range and it's time frame (default IST 9:15 but you can customize in pinescript as per your preferred Time Zone or just hide with toggle button.
KAMA Trend Flip with Snap & Follow - SightLing Labs🔭 OVERVIEW
KAMA Snap Follow is a customized adaptation of the Kaufman Adaptive Moving Average (KAMA) that overlays a trend-tracking line on the chart. It computes an adaptive smoothing constant from the efficiency ratio, then incorporates conditional enhancements: a "snap" mechanism to boost responsiveness on significant counter-trend bars surpassing an ATR-based threshold, and a temporary "follow" mode after trend flips to intensify adaptation for a user-defined number of bars. This allows the line to hug price more closely during early reversal phases before returning to standard smoothing for noise filtration. The line colors green for upward trends (rising KAMA), red for downward (falling KAMA), and gray for neutral, with optional alerts on trend changes. If the structure invalidates (e.g., via excessive lag or unconfirmed flips), no automatic cleanup occurs—users manage via settings tweaks and backtesting.
🔭 CONCEPTS
* Adaptive smoothing core: Builds on KAMA's efficiency ratio to dynamically adjust between fast and slow constants, gliding over minor volatility while aiming to react to directional shifts.
* Snap trigger: Detects potential reversals via large bar changes opposing the prior trend, exceeding a multiplier of ATR; this temporarily amplifies the smoothing constant (capped at 1.0) to pull KAMA toward price.
* Follow mode activation: Post-flip, engages a boosted adaptation phase for a fixed bar count, forcing tighter shadowing in the new direction to reduce lag on true turns, then reverts to absorber mode.
* Trend detection: Simple comparison of current vs. prior KAMA values defines up/down/neutral, with no embedded signals—purely for visual trend context.
* Risk-aware design: No guarantees; focuses on lag reduction in simulations (e.g., 38-54% trough lag cuts on synthetic volatile series), but real-market performance varies—backtest thoroughly.
🔭 FEATURES
* Custom KAMA calculation with manual efficiency ratio and smoothing powers for baseline adaptation.
* ATR-integrated snap for reversal sensitivity, with adjustable multiplier and boost.
* Post-flip follow mode with configurable period and boost to enhance new-trend hugging.
* Trend coloring and flip alerts: Green/red/gray line with conditions for up/down/neutral; alerts on changes.
* User controls:
Source (e.g., close).
Efficiency Ratio Length (pivot-like sensitivity).
Fast/Slow Powers (adaptation speed).
ATR Length (volatility measure).
Snap Multiplier/Boost (reversal threshold/amplification).
Follow Period/Boost (post-flip duration/intensity).
* Efficient execution: Lightweight, no heavy buffers—suitable for intraday charts via backtested tweaks.
🔭 HOW TO USE
* Tune sensitivity: Shorten Efficiency Ratio Length on lower timeframes for quicker reactions; lengthen on higher for smoother trends. Test ATR Length against asset volatility.
* Monitor flips: Use green/red shifts as trend context—combine with your strategy (e.g., crossovers, support/resistance) for potential entries; alerts notify changes.
* Leverage modes: Snap helps catch sharp turns; follow mode tightens tracking post-reversal—observe on historical data to gauge lag reduction (e.g., 30-57% miss cuts on 0.20 moves in tests).
* Apply MTF: Spot broader trends on 5m; refine on 30s/1m near flips. Backtest configurations to avoid over-optimization.
* Integrate confluence: Pair with volume, RSI, or your filters; never rely solely—markets evolve, so validate via simulations and live observation.
🔭 CONCLUSION
KAMA Snap Follow evolves standard KAMA by adding snap and follow mechanics to combat reversal lag while filtering bumps, offering a visual tool for trend analysis in volatile intraday setups. Developed to address traditional adaptive averages' delays without introducing excessive whipsaw (e.g., zero added in noisy flats per tests), it provides adjustable parameters for customization. No performance promises—results hinge on backtesting and market fit; use as a framework for scenario evaluation, not automated trading.
Example Configurations (derived from synthetic tests on SOFI-like intraday volatility; backtest and adjust):
- For 30s charts (high noise, rapid shifts): Efficiency Ratio Length=20, Fast Power=1, Slow Power=15, ATR Length=10, Snap Multiplier=1.2, Snap Boost=2.0, Follow Period=5, Follow Boost=2.5—yields ~40% lag reduction on turns, filtering 85% of <0.01 fluctuations.
- For 1m charts (moderate volatility): Efficiency Ratio Length=30, Fast Power=2, Slow Power=20, ATR Length=14, Snap Multiplier=1.5, Snap Boost=2.5, Follow Period=8, Follow Boost=3.0—achieves ~30% lower reversal misses (e.g., 0.08 vs. 0.12 on 0.20 swings), stable in 50-bar chops.
- For 5m charts (trendier flows): Efficiency Ratio Length=50, Fast Power=3, Slow Power=40, ATR Length=20, Snap Multiplier=1.8, Snap Boost=3.0, Follow Period=12, Follow Boost=3.5—boosts post-flip hug by 25%, ignoring 90% of ±0.05 noise across 100 bars.
