立即開始

Sweep

StO Price Action - Buy | Sell Side LiquidityShort Summary - Visualizes Buy-Side and Sell-Side Liquidity levels - Highlights resting liquidity above highs and below lows - Designed for price-action and liquidity-based trading Full Description Overview - Detects liquidity pools using pivot-based price structure - Buy-Side Liquidity (BSL) forms above relative highs - Sell-Side Liquidity (SSL) forms below relative lows - Liquidity levels represent areas where stop orders are likely resting - Levels are extended forward to visualize potential draw-on-liquidity zones - Optional historical liquidity tracking for contextual analysis Handling - Focuses on price-driven liquidity rather than indicators - Supports BSL only, SSL only or combined visualization - Uses configurable pivot lookback to define significant swings - Distinguishes active liquidity from historical liquidity - Clean, minimal chart overlay with customizable styles Usage - Select which liquidity side to display (BSL, SSL or both) - Adjust pivot lookback to control sensitivity - Configure line length and extension behavior - Enable history mode to keep older liquidity levels visible - Use liquidity levels as targets, reaction zones or confluence areas Notes - Liquidity levels do not predict direction, only attraction - Once plotted, levels remain static and do not repaint - Higher lookback values produce fewer but stronger levels - Best combined with market structure, entries, or rejection logic - Particularly effective around session highs and lows
Pine Script®指標
由sto_svc提供
GeorgeFX - CRT 4H Hunter ProThe GeorgeFX - CRT 4H Hunter Pro is a professional liquidity-tracking indicator designed for the 15-minute timeframe. It identifies high-probability reversals by monitoring 4-Hour (HTF) liquidity sweeps and confirming entries via local market structure shifts. Core Logic: 1.HTF Liquidity Detection: The script tracks the Previous 4H High and Low. 2.The Sweep (Liquidity Grab): It identifies when the 15m price pierces these 4H levels and closes back inside, signaling a potential "trap." 3.Volume Filter: Only sweeps with volume higher than the 20-period average ($1.1x$ multiplier) are considered valid. 4.Multi-Sweep Memory: The script tracks consecutive sweeps (C1, C2, C3) within the same 4H candle, resetting only when the price re-enters the 4H range. 5.Precision Entry (The Dot): A signal (●) is generated only when the 15m price closes beyond the trigger candle's body, confirming momentum. Visual Elements: 1.Stepline Levels: Red (4H High) and Green (4H Low) lines showing the HTF boundaries. 2.Sweep Boxes: Shaded regions showing the depth of the liquidity grab. 3.Confirmation Dot (●): High-visibility Lime (Buy) or Red (Sell) dots marking the exact entry candle. 4.Trigger Lines: Horizontal lines connecting the sweep to the entry point. 5.Visibility Limit: Display is optimized to show only the last 200 bars to keep the chart clean. Professional Alert System: 1.The script uses a standardized "Pro-Signal" format designed for instant readability on mobile devices or smartwatches. 2.Alert Trigger: Fires exactly at the close of the 15m confirmation candle. How to Set Up Alerts: 1.Apply the script to your 15-minute chart. 2.Click the Alerts icon (Clock) in the right sidebar. 3.Set Condition to GeorgeFX - CRT 4H Hunter Pro. 4.Select Any alert() function call. 5.Set Expiration to "Open-ended" and click Create.
Pine Script®指標
由GeorgeFutures提供
GeorgeFutures: ELITE Dashboard & Global Alert (C1,C2,C3)George FX : ELITE Dashboard & Global Alert This indicator acts as your "Market Compass," providing 1-Hour (HTF) context while you execute trades on the 5-Minute (LTF) timeframe. 1. The "Master Filter" Logic (1H Calculation) Regardless of the chart you are viewing, the script calculates three layers of data from the 1-hour timeframe in the background: Primary Trend (EMA 200): Establishes the permitted direction. If the price is above the EMA 200, it only looks for Longs; if below, only Shorts. Order Flow (FVG): Scans for institutional momentum. When a valid Fair Value Gap (imbalance) appears in the direction of the trend, it confirms market "strength." Liquidity (Sweep c1, c2, c3): Identifies traps. It checks if the price has "swept" the liquidity (Low/High) of the last 3 candles on the 1H chart. 2. Visual Indicator Meaning (Status Dots & Colors)The table communicates the market state using a simplified professional color code:ElementStatusMeaningORDER FLOWBULLISH/BEARISH1H momentum is confirmed by an FVG in the direction of the EMA 200 trend.LIQUIDITYLIQUIDITY GRABA "Sweep" has occurred (liquidity was taken) within the last 3 hours.STRATEGYREADY TO TRADE All conditions are aligned. It is time to look for an entry on the 5-minute chart. 3. Unified Global Alert System The alert is the "guardian" of your strategy: Operation: Monitors both directions (Long and Short) with a single setup. Trigger: You receive a notification only when the Strategy row turns READY TO TRADE. Message: The notification clearly states the ticker (e.g., BTCUSDT) and the direction (BULLISH or BEARISH) so you don't waste time. How to use it: Set the Alert: While on the 5-minute chart, create an alert for George FX: ELITE Global Signal. Wait: When the notification hits your phone, open the 5-minute chart. Execute: Since the 1H context is perfect, you only need to find a local entry (like a Market Structure Break) on the 5m chart.
Pine Script®指標
由GeorgeFutures提供
Session Liquidity Sweep + Trend ConfirmationThis strategy aims to capture high-probability intraday trades by combining liquidity sweeps with a trend confirmation filter. It is designed for traders who want a systematic approach to trade breakouts during specific market sessions while controlling risk with ATR-based stops. How it Works: Session Filter: Trades are only considered during a defined session (default 9:30 - 11:00). This helps avoid low-volume periods that can lead to false signals. Trend Confirmation: The strategy uses a 50-period EMA to identify the market trend. Long trades are only taken in an uptrend, and short trades in a downtrend. Liquidity Sweep Detection: A long entry occurs when price dips below the prior N-bar low but closes back above it, indicating a potential liquidity sweep that stops being triggered before the trend continues upward. A short entry occurs when price spikes above the prior N-bar high but closes below it, signaling a potential sweep of stops before the downward trend resumes. ATR-Based Risk Management: Stop loss is calculated using the Average True Range (ATR) multiplied by a configurable factor (default 1.5). Take profit is set based on a risk-reward ratio (default 2.5x). Position Sizing: Default position size is 5% of equity per trade, making it suitable for risk-conscious trading. Inputs: Session Start/End (HHMM) Liquidity Lookback Period (number of bars to define prior high/low) ATR Length for stop calculation ATR Stop Multiplier Risk-Reward Ratio EMA Trend Filter Length Visuals: Prior Liquidity High (red) Prior Liquidity Low (green) EMA Trend (blue) Why Use This Strategy: Captures stop-hunt moves often triggered by larger market participants. Only trades with trend confirmation, reducing false signals. Provides automatic ATR-based stop loss and take profit for consistent risk management. Easy to adjust session time, ATR, EMA length, and risk-reward to suit your trading style. Important Notes: Assumes 0.05% commission and 1-pip slippage. Adjust according to your broker. Not financial advice; intended for educational, backtesting, or paper trading purposes. Always test strategies thoroughly before applying to live accounts.
Pine Script®策略
由AIScripts提供
Liquidity Buy SignalLiquidity Buy Signal is an indicator designed to detect BUY entries based on liquidity (swing lows) combined with a bullish reversal candle pattern. It automatically marks recent swing-low zones/levels, tracks the transition from solid → dashed when a level gets broken, and then confirms a signal when price sweeps/cuts the correct level and a bullish candle pattern appears. OANDA:EURUSD BUY signal (green triangle) triggers when: A bullish reversal candle pattern (based on a set of rules) is detected, and The Liquidity chain conditions are satisfied using the most recent swing lows: Price crosses the level with the lower wick, or The level is within the lower 30% range of the previous candle (n-1), and The level does not pass through the bodies of older candles (filtered by lookback). Key settings: Pivot Lookback: controls swing-low detection sensitivity. Swing Area: Wick Extremity / Full Range for zone definition. Filter lookback older bodies: filters out levels that intersect older candle bodies (skips n-2). Style: toggle Swing Low display + zone/line colors. Alerts: Includes a built-in alertcondition for BUY signals (useful for notifications/webhooks). This indicator is especially well-suited for identifying potential bottoms in a downtrend. Note: This tool provides trading signals and should be combined with context (trend/HTF/volume/risk management) before entering trades. Not financial advice.
Pine Script®指標
由StrategyLAB_提供
1
Quantura - Liquidity Sweep & Run LevelsIntroduction “Quantura – Liquidity Sweep & Run Levels” is a structural price-action indicator designed to automatically detect swing-based liquidity zones and visualize potential sweep and run events. It helps traders identify areas where liquidity has likely been taken (sweep) or released (run), improving precision in market structure analysis and timing of entries or exits. Originality & Value This tool translates institutional liquidity concepts into an automated visual framework. Instead of simply marking highs and lows, it dynamically monitors swing points, tracks their breaches, and identifies subsequent reactions. The indicator is built to highlight the liquidity dynamics that often precede reversals or continuations. Its originality lies in: Automatic identification and tracking of swing highs and lows. Real-time detection of broken levels and liquidity sweeps. Distinction between “Run” and “Sweep” modes for different market behaviors. Persistent historical visualization of liquidity levels using clean line structures. Configurable signal markers for bullish and bearish sweep confirmations. Functionality & Core Logic Detects swing highs and lows using a user-defined Swing Length parameter. Stores and updates all swing levels dynamically with arrays for efficient memory handling. Draws horizontal lines from each detected swing point to visualize potential liquidity zones. Monitors when price breaks a swing level and marks that event as “broken.” Generates signals when the market either sweeps above/below or runs away from those levels, depending on the chosen mode. Provides optional visual signal markers (“▲” for bullish sweeps, “▼” for bearish sweeps). Parameters & Customization Mode: Choose between “Sweep” (detects liquidity grabs) or “Run” (detects breakout continuations). Swing Length: Sets the sensitivity for detecting swing highs/lows. A higher value focuses on larger structures, while smaller values detect micro liquidity points. Bullish Color / Bearish Color: Customize color themes for sweep/run lines and signal markers. Signals: Enables or disables visual up/down markers for confirmed events. Visualization & Display Horizontal lines represent potential liquidity levels (unbroken swing highs/lows). Once broken, lines automatically stop extending, marking the moment liquidity is taken. Depending on the selected mode: “Sweep” mode identifies false breaks or stop-hunt behavior. “Run” mode highlights breakouts that continue the trend. Colored arrows indicate the direction and type of liquidity reaction. Clean, non-intrusive visualization suitable for overlaying on price charts. Use Cases Detect liquidity sweeps before major reversals. Identify breakout continuations after liquidity runs. Combine with Supply/Demand or FVG indicators for multi-layered confirmation. Validate liquidity bias in algorithmic or discretionary strategies. Analyze market manipulation patterns and institutional stop-hunting behavior. Limitations & Recommendations This indicator identifies structural behavior but does not guarantee trade direction or profitability. Works best on liquid markets with clear swing structures (e.g., crypto, forex, indices). Signal interpretation should be combined with confluence tools such as volume, order flow, or structure-based filters. Excessively small swing settings may cause over-signaling in volatile markets. Markets & Timeframes Optimized for all major asset classes — including crypto, Forex, indices, and equities — and for intraday to higher-timeframe structural analysis (5-minute up to daily charts). Author & Access Developed 100% by Quantura. Published as a Open-source script indicator. Access is free. Compliance Note This description fully complies with TradingView’s Script Publishing Rules and House Rules . It avoids performance claims, provides transparency on methodology, and clearly describes indicator behavior and limitations.
Pine Script®指標
由Quantura提供
$ - HTF Sweeps & PO3HTF Sweeps & PO3 Indicator The HTF Sweeps & PO3 indicator is a powerful tool designed for traders to visualise higher timeframe (HTF) candles, identify liquidity sweeps, and track key price levels on a lower timeframe (LTF) chart. Built for TradingView using Pine Script v6, it overlays HTF candle data and highlights significant price movements, such as sweeps of previous highs or lows, to help traders identify potential liquidity sweep and reversal points. The indicator is highly customisable, offering a range of visual and alert options to suit various trading strategies. Features Higher Timeframe (HTF) Candle Visualisation: - Displays up to three user-defined HTF candles (e.g., 15m, 1H, 4H) overlaid on the LTF chart. - Customisable candle appearance with adjustable size (Tiny to Huge), offset, spacing, and colours for bullish/bearish candles and wicks. - Option to show timeframe labels above or below HTF candles with configurable size and position. Liquidity Sweep Detection: - Identifies bullish and bearish sweeps when price moves beyond the high or low of a previous HTF candle and meets specific conditions. - Displays sweeps on both LTF and HTF with customisable line styles (Solid, Dashed, Dotted), widths, and colours. - Option to show only the most recent sweep per candle to reduce chart clutter. Invalidated Sweep Tracking: - Detects and visualises invalidated sweeps (when price moves past a sweep level in the opposite direction). - Configurable display for invalidated sweeps on LTF and HTF with distinct line styles and colours. Previous High/Low Lines: - Plots horizontal lines at the high and low of the previous HTF candle, extending on both LTF and HTF. - Customisable line style, width, and color for easy identification of key levels. - Real-Time Sweep Detection: -Optional real-time sweep visualisation for active candles, enabling traders to monitor developing price action. Alert System: - Triggers alerts for sweep formation (when a new sweep is detected). - Triggers alerts for sweep invalidation (when a sweep is no longer valid). - Alerts include details such as timeframe, ticker, and price level for precise notifications. Performance Optimisation: - Efficiently manages resources with configurable limits for lines, labels, boxes, and bars (up to 500 each). - Cleans up outdated visual elements to maintain chart clarity. Flexible Configuration: - Supports multiple timeframes for HTF candles with user-defined settings for visibility and number of candles displayed (1–60). - Toggle visibility for HTF candles, sweeps, invalidated sweeps, and high/low lines independently for LTF and HTF. This indicator is ideal for traders focusing on liquidity hunting, order block analysis, or price action strategies, providing clear visual cues and alerts to enhance decision-making.
Pine Script®指標
由wintonbanks提供
24
cd_indiCATor_CxGeneral: This indicator is the redesigned, simplified, and feature-enhanced version of the previously shared indicators: cd_cisd_market_Cx, cd_HTF_Bias_Cx, cd_sweep&cisd_Cx, cd_SMT_Sweep_CISD_Cx, and cd_RSI_divergence_Cx. Within the holistic setup, the indicator tracks: • HTF bias • Market structure (trend) in the current timeframe • Divergence between selected pairs (SMT) • Divergence between price and RSI values • Whether the price is in an important area (FVG, iFVG, and Volume Imbalance) • Whether the price is at a key level • Whether the price is within a user-defined special timeframe The main condition and trigger of the setup is an HTF sweep with CISD confirmation on the aligned timeframe. When the main condition occurs, the indicator provides the user with a real-time market status summary, enriched with other data. ________________________________________ What’s new? -In the SMT module: • Triad SMT analysis (e.g.: NQ1!, ES1!, and YM1!) • Dyad SMT analysis (e.g.: EURUSD, GBPUSD) • Alternative pair definition and divergence analysis for non-correlated assets o For crypto assets (xxxUSDT <--> xxxUSDT.P) (e.g.: SOLUSDT.P, SOLUSDT) o For stocks, divergence analysis by comparing the asset with its value in another currency (BIST:xxx <--> BIST:xxx / EURTRY), (BAT:xxx <--> BAT:xxx / EURUSD) -Special timeframe definition -Configurable multi-option alarm center -Alternative summary presentation (check list / status table / stickers) ________________________________________ Details and usage: The user needs to configure four main sections: • Pair and correlated pairs • Timeframes (Auto / Manual) • Alarm center • Visual arrangement and selections Pair Selections: The user should adjust trading pairs according to their trade preferences. Examples: • Triad: NQ1!-ES1!-YM1!, BTC-ETH-Total3 • Dyad: NAS100-US500, XAUUSD-XAGUSD, XRPUSDT-XLMUSDT Single pairs: -Crypto Assets: If crypto assets are not in the triad or dyad list, they are automatically matched as: Perpetual <--> Spot (e.g.: DOGEUSDT.P <--> DOGEUSDT) If the asset is already defined in a dyad list (e.g., DOGE – SHIB), the dyad definition takes priority. ________________________________________ -Stocks: If stocks are defined in the dyad list (e.g.: BIST:THYAO <--> BIST:PGSUS), the dyad definition takes priority. If not defined, the stock is compared with its value in the selected currency. For example, in the Turkish Stock Exchange: BIST:FENER stock, if EUR is chosen from the menu, is compared as BIST:FENER / OANDA:EURTRY. Here, “OANDA” and the stock market currency (TRY) are automatically applied for the exchange rate. For NYSE:XOM, its pair will be NYSE:XOM / EURUSD. ________________________________________ Timeframes: By default, the menu is set to “Auto.” In this mode, aligned timeframes are automatically selected. Aligned timeframes (LTF-HTF): 1m-15m, 3m-30m, 5m-1h, 15m-4h, 1h-D, 4h-W, D-M Example: if monitoring the chart on 5m: • 1h sweep + 5m CISD confirmation • D sweep + 1h CISD confirmation (bias) • 5m market structure • 1h SMT and 1h RSI divergence analysis For manual selections, the user must define the timeframes for Sweep and HTF bias. FVG, iFVG, and Volume Imbalance timeframes must be manually set in both modes. ________________________________________ Alarm Center: The user can choose according to preferred criteria. Each row has options. “Yes” → included in alarm condition. “No” → not included in alarm condition. If special timeframe criteria are added to the alarm, the hour range must also be entered in the same row, and the “Special Zone” tab (default: -4) should be checked. Key level timeframes and plot options must be set manually. Example alarm setup: Alongside the main Sweep + CISD condition, if we also want HTF bias + Trend alignment + key level (W, D) and special timeframe (09:00–11:00), we should set up the menu as follows: ________________________________________ Visual Arrangement and Selections: Users can control visibility with checkboxes according to their preferences. In the Table & Sticker tab, table options and labels can be controlled. • Summary Table has two options: Check list and Status Table • From the HTF bias section, real-time bias and HTF sweep zone (optional) are displayed • The RSI divergence section only shows divergence analysis results • The SMT 2 sub-section only functions when triad is selected Labels are shown on the bar where the sweep + CISD condition occurs, displaying the current situation. With the Check box option, all criteria’s real-time status is shown (True/False). Status Table provides a real-time summary table. Although the menu may look crowded, most settings only need to be adjusted once during initial use. ________________________________________ What’s next? • Suggestions from users • Standard deviation projection • Mitigation/order blocks (cd special mtg) • PSP /TPD ________________________________________ Final note: Every additional criterion in the alarm settings will affect alarm frequency. Multiple conditions occurring at the same time is not, by itself, sufficient to enter a trade—you should always apply your own judgment. Looking forward to your feedback and suggestions. Happy trading! 🎉
Pine Script®指標
由cdikici71提供
111
B A N K $ - Breaks & SweepsThis indicator automatically maps on Breaks of Structure & Liquidity Sweeps. It works by calculating pivot points based on how many candles are above/below either side of a pivot. The user can manually set how many candles need to be above/below either side of a pivot if they would prefer to change it. The indicator will dynamically adjust the lines as the user changes timeframe to allow for seamless analysis. Features Break of Structure lines Liquidity Sweep lines Dealing Range - this allows the user to visualise the current dealing range Explanation A sweep is determined by whether a candle closes through a pivot point with a body closure or not. If the candle wicks this level but fails to close through it, the line will turn red to indicate a liquidity sweep. If the following 3 candles go on to close through the break line, this will then update it from a red sweep line to the normal break line again. (sometimes the initial candle that touches a level will not close through it but price will continue to break that level in the next few candles).
Pine Script®指標
由wintonbanks提供
cd_SMT_Sweep_CISD_CxGeneral This indicator is designed to show trading opportunities after sweeps of higher timeframe (HTF) highs/lows and, if available, Smart Money Technique (SMT) divergence with a correlated asset, followed by confirmation from a lower timeframe change in state delivery (CISD). Users can track SMT, Sweep, and CISD levels across nine different timeframes. ________________________________________ Usage and Details Commonly correlated timeframes are available in the menu by default. Users can also enter other compatible timeframes manually if necessary. The indicator output is presented as: • A summary table • Display on HTF candles • CISD levels shown as lines Users can disable any of these from the menu. Presentations of selected timeframes are displayed only if they are greater than or equal to the active chart timeframe. From the Show/Hide section, you can control the display of: • SMT table • Sweep table • HTF candles • CISD levels • HTF boxes aligned with the active timeframe ________________________________________ SMT Analysis To receive analysis, users must enter correlated assets in the menu (or adjust them as needed). If asset X is paired with correlated asset Y, then a separate entry for Y correlated with X is not required. Four correlation pairs are included by default. Users should check them according to their broker/exchange or define new ones. Checkboxes at the beginning of each row allow activation/deactivation of pairs. SMT analysis is performed on the last three candles of each selected HTF. If one asset makes a new high while the correlated one does not (or one makes a new low while the other does not), this is considered SMT and will be displayed both in the table and on the chart. Charts without defined correlated assets will not display an SMT table. ________________________________________ Sweep Analysis For the selected timeframes, the current candle is compared with the previous one. If price violates the previous level and then pulls back behind it, this is considered a sweep. It is displayed in both the table and on the chart. Within correlated pairs, the analysis is done separately and shown only in the table. Example with correlated and non-correlated pairs: • In the table, X = false, ✓ = true. • The Sweep Table has two columns for Bullish and Bearish results. • For correlated pairs, both values appear side by side. • For undefined pairs, only the active asset is shown. Example 1: EURUSD and GBPUSD pair • If both sweep → ✓ ✓ • If one sweeps, the other does not → ✓ X • If neither sweeps → X X Example 2: AUDUSD with no correlated pair defined • If sweep → ✓ • If no sweep → X ________________________________________ HTF Candles For every HTF enabled by the user, the last three candles (including the current one) are shown on the chart. SMT and sweep signals are marked where applicable. ________________________________________ CISD Levels For the selected timeframes, bullish and bearish CISD levels are plotted on the chart. ________________________________________ HTF Boxes HTF boxes aligned with the active timeframe are displayed on the chart. Box border colors change according to whether the active HTF candle is bullish or bearish. ________________________________________ How to Read the Chart? Let’s break down the example below: • Active asset: Nasdaq • Correlated asset: US500 (defined in the menu, confirmed in the table bottom row) • Active timeframe: H1 → therefore, the HTF box is shown for Daily • Since a correlated pair is defined, the indicator runs both SMT and Sweep analysis for the selected timeframes. Without correlation, only Sweep analysis would be shown. Table is prepared for H1 and higher timeframes (as per user selection and active TF). Observations: • SMT side → H1 timeframe shows a bearish warning • Sweep side → Bearish column shows X and ✓ o X → no sweep on Nasdaq o ✓ → sweep on US500 Meaning: US500 made a new high (+ sweep) while Nasdaq did not → SMT formed. The last column of the table shows the compatible LTF for confirmation. For H1, it suggests checking the 5m timeframe. On the chart: • CISD levels for selected timeframes are drawn • SMT line is marked on H1 candles • Next step: move to 5m chart for CISD confirmation before trading (with other confluences). Similarly, the Daily row in the table shows a Bullish Sweep on US500. ________________________________________ Alerts Two alert options are available: 1. Activate Alert (SMT + Sweep): Triggers if both SMT and Sweep occur in the selected timeframes. (Classic option) 2. Activate Alert (Sweep + Sweep): Triggers if sweeps occur in both assets of a correlated pair at the same timeframe. Interpretation: If SMT + Sweep are already present on higher timeframes, and simultaneous sweeps appear on lower timeframes, this may indicate a strong directional move. Of course, this must be validated with CISD and other confluences. ________________________________________ HTF CISD Levels Although CISD levels act as confirmation levels in their own timeframe, observing how price reacts to HTF CISD levels can provide valuable insights for intraday analysis. POIs overlapping with these levels may be higher priority. ________________________________________ What’s Next in Future Versions? • Completed CISD confirmations • Additional alert options • Plus your feedback and suggestions ________________________________________ Final Note I’ll be happy to hear your opinions and feedback. Happy trading!
Pine Script®指標
由cdikici71提供
25
Liquidity Swing Points [BackQuant]Liquidity Swing Points This tool marks recent swing highs and swing lows and turns them into persistent horizontal “liquidity” levels. These are places where resting orders often accumulate, such as stop losses above prior highs and below prior lows. The script detects confirmed pivots, records their prices, draws lines and labels, and manages their lifecycle on the chart so you can monitor potential sweep or breakout zones without manual redrawing. What it plots LQ-H at confirmed swing highs LQ-L at confirmed swing lows Horizontal levels that can optionally extend into the future Timed removal of old levels to keep the chart clean Each level stores its price, the bar where it was created, its type (high or low), plus a label and a line reference for efficient updates. How it works Pivot detection A swing high is confirmed when the highest high has swing_length bars on both sides that are lower. A swing low is confirmed when the lowest low has swing_length bars on both sides that are higher. Pivots are only marked after they are confirmed, so they do not repaint. Level creation When a pivot confirms, the script records the price and the creation bar (offset by the right lookback). A new line is plotted at that price, labeled LQ-H or LQ-L. Rendering and extension Levels can be drawn to the most recent bar only or extended to the right for forward reference. Label size and line color/transparency are configurable. Lifecycle management On each confirmed bar, the script checks level age. Levels older than a chosen bar count are removed automatically to reduce clutter. How it can be used Liquidity sweeps: Watch for price to probe beyond a level then close back inside. That behavior often signals a potential fade back into the prior range. Breakout validation: If price pushes through a level and holds on closes, traders may treat that as continuation. Retests of the level from the other side can serve as structure checks. Context for entries and exits: Use nearby LQ-H or LQ-L as reference for stop placement or partial-take zones, especially when other tools agree. Multi-timeframe mapping: Plot swing points on higher timeframes, then drill down to time entries on lower timeframes as price interacts with those levels. Why liquidity levels matter Prior swing points are focal areas where many strategies set stops or pending orders. Price often revisits these zones, either to “sweep” resting liquidity before reversing, or to absorb it and trend. Marking these areas objectively helps frame scenarios like failed breaks, successful breakouts, and retests, and it reduces the subjectivity of eyeballing structure. Settings to know Swing Detection Length (swing_length), Controls sensitivity. Lower values find more local swings. Higher values find more significant ones. Bars until removal (removeafter), Deletes levels after a fixed number of bars to prevent buildup. Extend Levels Right (extend_levels), Keeps levels projected into the future for easier planning. Label Size (label_size), Choose tiny to large for chart readability. One color input controls both high and low levels with transparency for context. Strengths Objective marking of recent structure without hand drawing No repaint after confirmation since pivots are locked once the right lookback completes Lightweight and fast with simple lifecycle management Clear visuals that integrate well with any price-action workflow Practical tips For scalping: use smaller swing_length to capture more granular liquidity. Keep removeafter short to avoid clutter. For swing trading: increase swing_length so only more meaningful levels remain. Consider extending levels to the right for planning. Combine with time-of-day filters, ATR for stop sizing, or a separate trend filter to bias trades taken at the levels. Keep screenshots focused: one image showing a sweep and reversal, another showing a clean breakout and retest. Limitations and notes Levels appear after confirmation, so they are delayed by swing_length bars. This is by design to avoid repainting. On very noisy or illiquid symbols, you may see many nearby levels. Increasing swing_length and shortening removeafter helps. The script does not assess volume or session context. Consider pairing with volume or session tools if that is part of your process.
Pine Script®指標
由BackQuant提供
7
Sweep2Trade Pro [CHE]Sweep2Trade Pro \ — Liquidity Sweep → Trend → Confirmation Sweep2Trade Pro \ helps you catch high-probability reversals or continuations that start with a liquidity sweep, align with the T3 trend, and finalize with a structure confirmation (BOS). It’s designed to reduce noise, time your entries, and keep you out of weak, chop-driven signals. What’s a “sweep”? A liquidity sweep happens when price briefly breaks a prior swing high/low (where many stops sit), triggers those stops, and then snaps back. This “stop-hunt” creates liquidity for bigger players and often precedes a sharp move in the opposite direction if the break fails, or fuels continuation if structure actually shifts. What’s a BOS (Break of Structure)? A BOS is a price action event where the market takes out a recent swing level in the trend’s direction, signaling continuation and confirming that structure has shifted (bullish BOS through a recent swing high, bearish BOS through a recent swing low). How the indicator works (at a glance) 1. Regime Filter (T3 + R²) T3 Moving Average: A smoother, faster-responding moving average that aims to reduce lag while filtering noise, so trend direction changes are clearer. R² (Coefficient of Determination): Measures how “linear” the recent price path is (0→1). Higher values = stronger, cleaner trend; lower values = more chop. Used here to allow trades only when trend quality exceeds a user-set threshold. 2. Sweep Detection Bullish sweep: price pokes below a prior swing low and closes back above it. Bearish sweep: price pokes above a prior swing high and closes back below it. Lookback length is configurable. 3. Sequence Lock (built-in FSM) The script manages state in phases so you don’t jump the gun: Phase 1: Sweep detected → wait for T3 to turn in the corresponding direction. Phase 2: T3 direction confirmed → show “SWEEP OK” and wait for final confirmation. Trade Signal: Only fires if confirmation arrives before a timeout. 4. Confirmation Layer BOS via wick or close (you choose), Strong close toward the signal (top/bottom quartile of the candle), Optional “close above/below T3” condition. These checks help avoid weak sweeps that immediately fade. 5. Alerts & Visuals “SWEEP OK” markers show when the sweep + T3 direction align. Final BUY/SELL arrows appear only when the confirmation layer passes. Ready-made alert conditions for automation. What you can do with it Time reversals after sweeps: Enter when a stop-hunt fades and structure confirms. Ride continuations: Use BOS with the T3 trend to pyramid or re-enter with structure on your side. Filter chop: Let R² gate entries to periods with cleaner directional drift. Automate: Use the included alerts with your platform or webhook setup. Inputs (key settings) Regime Filter T3 Length / Volume Factor: Controls smoothness and responsiveness. Smaller length → faster, more sensitive; higher volume factor → smoother curve. R² Lookback & Threshold: Length of the linear fit window and the minimum “trend quality” required. Higher thresholds mean fewer, cleaner signals. Sweep / Sequence Swing Lookback: How far back to define the “reference” high/low for sweeps. Timeout: Maximum bars allowed between phases to keep signals fresh. Restart timeout on Phase 2: Optional safety so entries don’t go stale. Confirmation BOS Lookback: Micro-pivot window for structure breaks. Wick vs Close BOS: Conservative traders may prefer close. Require close above/below T3: Tightens confirmation with trend alignment. Practical guide (quick start) 1. Timeframe & markets: Works across majors, indices, and crypto. Start with 5m–1h intraday or 1h–4h swing; adjust R² threshold upward on noisier pairs. 2. Entry recipe (Long): Bullish sweep of a prior low → T3 turns up → BOS/strong close. Optional: enable “close above T3” for extra confirmation. 3. Entry recipe (Short): Mirror the above. 4. Stops: Common choices are just beyond the sweep wick (tighter) or past the BOS invalidation (safer). 5. Targets: Previous structural levels, measured move, or a T3 trail (exit when price closes back through T3). 6. Avoid low-quality contexts: If R² is very low, market is likely ranging erratically—skip or widen filters. Tips & best practices Context first: The same sweep means different things in a strong trend vs. flat regime; that’s why the T3+R² filter exists. BOS choice: Wick-based BOS is earlier but noisier; close-based BOS is slower but cleaner. Tune per market. Backtest -> Forward test: Validate settings per symbol/timeframe; then paper trade before going live. Risk: Fixed fractional risk with asymmetric R\:R (e.g., 1:1.5–1:3) generally performs better than “all-in” discretionary sizing. Behind the scenes (for the curious) T3 is a multi-stage EMA construction that produces a smooth curve with reduced lag versus simple/standard EMAs. R² is the square of correlation (0–1). Here it’s used as a moving gauge of how well price aligns to a linear path—our “trend quality” dial. Stop-hunts / sweeps are a recognized microstructure phenomenon where clustered stops provide the liquidity that fuels the next move. Disclaimer No indicator guarantees profits. Sweep2Trade Pro \ is a decision aid; always combine with solid risk management and your own judgment. Backtest, forward test, and size responsibly. The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Enhance your trading precision and confidence 🚀 Happy trading Chervolino
Pine Script®指標
由chervolino提供
3
cd_HTF_bias_CxOverview: No matter our trading style or model, to increase our success rate, we must move in the direction of the trend and align with the Higher Time Frame (HTF). Trading "gurus" call this the HTF bias. While we small fish tend to swim in all directions, the smart way is to flow with the big wave and the current. This indicator is designed to help us anticipate that major wave. ________________________________________ Details and Usage: This indicator observes HTF price action across preferably seven different pairs, following specific rules. It confirms potential directional moves using CISD levels on a Medium Time Frame (MTF). In short, it forecasts the likely direction (HTF bias). The user can then search for trade opportunities aligned with this bias on a Lower Time Frame (LTF), using their preferred pair, entry model, and style. ________________________________________ Timeframe Alignment: The commonly accepted LTF/MTF/HTF combinations include: • 1m – 15m – H4 • 3m – H1 – Daily / 3m – 30m – Daily • 5m – H1 – Daily • 15m – H4 – Weekly • H1 – Daily – Monthly • H4 – Weekly – Quarterly Example: If you're trading with a 3m model on a 30m/3m setup, you should seek trades in the direction of the H1/Daily bias. ________________________________________ How It Works: The indicator first looks for sweeps on the selected HTF — when any of the last four candles are swept, the first condition is met. The second step is confirmation with a CISD close on the MTF — once a candle closes above/below the CISD level, the second condition is fulfilled. This suggests the price has made its directional decision. Example: If a previous HTF candle is swept and we receive a bearish CISD confirmation on H1, the HTF bias becomes bearish. After this, you may switch to a more granular setup like HTF: 30m and MTF: 3m to look for trade entries aligned with the bias (e.g., 30m sweep + 3m CISD). ________________________________________ How Is Bias Determined? • HTF Sweep + MTF CISD = SC (Sweep & CISD) • Latest Bullish SC → Bias: Bullish • Latest Bearish SC → Bias: Bearish • Price closes above the last Bearish SC → Bias: Strong Bullish • Price closes below the last Bullish SC → Bias: Strong Bearish • Strong Bullish bias + Bearish CISD (without HTF sweep) → Bias: Bullish • Strong Bearish bias + Bullish CISD (without HTF sweep) → Bias: Bearish • Bearish price violates SC high, but Bullish SC is untouched → Bias: Bullish • Bullish price violates SC low, but Bearish SC is untouched → Bias: Bearish • If neither side generates SC → Bias: No Bias The logic is built on the idea that a price overcoming resistance is stronger, and encountering resistance is weaker. This model is based on the well-known “Daily Bias” structure, but with personal refinements. ________________________________________ What’s on the Screen? • Classic HTF zones (boxes) • Potential MTF CISD levels • Confirmed MTF lines • Sweep zones when HTF sweeps occur • Result table showing current bias status ________________________________________ Usage: • Select HTF and MTF timeframes aligned with your trading timeframe. • Adjust color and position settings as needed. • Enter up to seven pairs to track via the menu. • Use the checkbox next to each pair to enable/disable them. • If “Ignore these assets” is checked, all pairs will be disabled, and only the currently open chart pair will be tracked. ________________________________________ Alerts: You can choose alerts for Bullish, Bearish, Strong Bullish, or Strong Bearish conditions. There are two types of alert sources: 1. From the indicator’s internal list 2. From TradingView’s watchlist Visual example: ________________________________________ How I Use It: • For spot trades, I use HTF: Weekly and MTF: H4 and look for Bullish or Strong Bullish pairs. • For scalping, I follow bias from HTF: Daily and MTF: H1. Example: If the indicator shows a Bearish HTF Bias, I switch to HTF: 30m and MTF: 3m and enter trades once bearish conditions are met (timeframe alignment). ________________________________________ Important Notes: • The indicator defines CISD levels only at HTF high and low levels. • If your chart is on a higher timeframe than your selected HTF/MTF, no data will appear. Example: If HTF = H1 and MTF = 5m, opening a chart on H4 will result in a blank screen. • The drawn CISD level on screen is the MTF CISD level. • Not every alert should be traded. Always confirm with personal experience and visual validation. • Receiving multiple Strong Bullish/Bearish alerts is intentional. (Trick 😊) • Please share your feedback and suggestions! ________________________________________ And Most Importantly: Don't leave street animals without water and food! Happy trading!
Pine Script®指標
由cdikici71提供
17
cd_sweep&cisd_CxOverview: When the price is at a significant zone/level on a higher time frame (HTF), and it sweeps (breaks through and then closes back below/above) the high or low of the previous HTF candle, it is common to look for a Change in State of Delivery (CISD) on a lower time frame (LTF) to enter a trade. This model can be summarized as: HTF Sweep → LTF CISD (Optional: SMT / Divergences) ________________________________________ Working Principle & Details: 1. The indicator monitors price action on the selected HTF and tracks any sweep (violation) of the previous HTF candle's high or low. Simultaneously, it identifies CISD levels on the LTF. If SMT is enabled, it will appear as a label on the chart. When both HTF sweep and LTF CISD conditions are met, the indicator marks the chart at the open of the next candle and triggers an alert if set. CISD levels are tracked and updated whenever a new HTF high/low is formed. 2. The indicator monitors the formation of entry models on up to six selected pairs, displaying results in two separate tables: o HTF Sweep Query Table: Monitors live HTF candles and reports pairs that meet the sweep condition. o CISD Table: Displays the pairs where a valid entry model has formed. A "🔥" symbol indicates the condition has occurred. 3. Bias Visualization: Based on the selected HTF, a visual band is shown at the bottom of the chart using the chosen bullish/bearish colors. Bias is determined by: o Candle closing above/below the previous one suggesting continuation. o A failed close after a sweep implying potential reversal. 4. HTF Candles: Displays HTF candles based on the user-defined time frame. 5. Optional SMT (Smart Money Technique): Must be enabled in the menu and requires the correlated pair to be entered correctly for accurate results. Displayed only as a visual confirmation, not a requirement for model formation. If the currently open symbol sweeps the previous candle while the correlated symbol does not (or vice versa), an "SMT" label appears on the chart. 6. Color & Table Positioning: Controlled via the settings menu. ________________________________________ Warnings: • The indicator only marks CISDs that form at HTF high/low zones. • Entering every time the model forms does not guarantee profitability. • Waiting for the model to appear at significant HTF levels/zones increases the likelihood of success. • HTF and LTF selections should follow commonly accepted combinations or user-tested time frames. • If you want to trigger alerts only for symbols entered in the indicator, ensure the "Use indicator alerts" option is enabled. • To set alerts for the TradingView watchlist instead, disable the "Use indicator alerts" option. ________________________________________ Feel free to share your thoughts and suggestions. Happy trading! 💫
Pine Script®指標
由cdikici71提供
48
ICT Setup 04 [TradingFinder] SFP Sweep Liquidity Fake CHoCH/BOS🔵 Introduction In smart money and ICT based trading, liquidity is never random. Some of the most meaningful market moves begin with a liquidity sweep where price intentionally hunts a previous swing high or swing low to trigger stop loss orders and absorb volume. This manipulation is often followed by a sharp reversal from a reaction zone, creating ideal conditions for a high probability entry. This indicator is built to detect exactly that. It identifies a valid swing point and defines a reaction zone where price is likely to react. For short setups, the zone lies between the swing high and the maximum of the candle’s open or close. For long setups, it’s drawn from the swing low to the minimum of the open or close. When price returns to this zone and forms a qualified confirmation candle typically a doji or a small bodied candle that closes inside the zone while sweeping the liquidity this is a potential sign of reversal. The candle must show both the sweep and the inability to hold above or below the key level, signaling a fake breakout or failed move. By combining elements of liquidity hunt, reaction zone rejection, and candle based entry confirmation, this tool highlights sniper entry points used by smart money to trap retail traders and reverse the trend. It helps filter out noise and enhances timing, making it ideal for trading in alignment with institutional order flow. Long Position : Short Position : 🔵 How to Use This indicator is designed to highlight precise moments where price sweeps liquidity and reacts within a high probability reversal zone. By identifying clean swing highs and lows and defining a smart reaction zone around them, it filters out weak fakeouts and focuses only on setups with strong institutional footprints. The tool works best when combined with market structure analysis and is suitable for both scalping and intraday trading. Below is a breakdown of how to interpret the signals for long and short positions based on the visual setups provided. 🟣 Long Setup In a long setup, the indicator first detects a valid swing low where liquidity has likely accumulated below. A reaction zone is then drawn between the swing low and the minimum of the open or close of the swing candle. When price returns to this zone, it must sweep the previous low and form a precise confirmation candle, such as a doji or a small bodied candle, that closes inside the zone. This candle must also reject the lower level, showing failure to continue downward. As shown in the chart, once the liquidity grab is complete and the confirmation candle forms, a clean long signal is issued, indicating a potential bullish reversal backed by smart money behavior. 🟣 Short Setup In a short setup, the indicator identifies a swing high where buy-side liquidity is resting. It then constructs a reaction zone between the high and the maximum of the open or close of the swing candle. Price must return to this zone, sweep the swing high, and form a bearish confirmation candle inside the zone. A classic example is a doji or rejection candle that traps breakout buyers and fails to hold above the previous high. In the provided chart, the price aggressively hunts the liquidity above the swing high, but the close within the reaction zone signals exhaustion, prompting a short signal with high reversal probability. These setups represent moments where price action, liquidity behavior, and candle structure align to offer strong entries. By focusing on clean sweeps and reactive confirmations, the indicator helps traders stay on the side of smart money and avoid common breakout traps. 🔵 Settings 🟣 Logical settings Swing period : You can set the swing detection period. Max Swing Back Method : It is in two modes "All" and "Custom". If it is in "All" mode, it will check all swings, and if it is in "Custom" mode, it will check the swings to the extent you determine. Max Swing Back : You can set the number of swings that will go back for checking. Maximum Distance Between Swing and Signal :The maximum number of candles allowed between the swing point and the potential signal. The default value is 50, ensuring that only recent and relevant price reactions are considered valid. 🟣 Display settings Displaying or not displaying swings and setting the color of labels and lines. 🟣 Alert Settings Alert SFP : Enables alerts for Swing Failure Pattern. Message Frequency : Determines the frequency of alerts. Options include 'All' (every function call), 'Once Per Bar' (first call within the bar), and 'Once Per Bar Close' (final script execution of the real-time bar). Default is 'Once per Bar'. Show Alert Time by Time Zone : Configures the time zone for alert messages. Default is 'UTC'. 🔵 Conclusion This indicator is built for traders who rely on liquidity driven setups and smart money principles. By combining swing structure analysis with precision reaction zones and strict entry confirmation, it isolates the exact moments where price sweeps liquidity and fails to continue. These are high value points where institutional activity often reveals itself, and retail traps unfold. Unlike generic breakout tools, this script focuses on quality over quantity by requiring both a sweep of a swing high or low and a confirmed rejection candle that closes inside a predefined zone. With customizable swing depth, proximity filters, visual highlights, and alert functions, it offers a complete framework for identifying and acting on fake breakouts with confidence. Whether you trade forex, crypto, or indices, this tool enhances your ability to align with true order flow and take entries where liquidity is most likely to shift.
Pine Script®指標
由TFlab提供
16
Liquidity Sweep Candlestick Pattern with MA Filter📌 Liquidity Sweep Candlestick Pattern with MA Filter This custom indicator detects liquidity sweep candlestick patterns—price action events where the market briefly breaks a previous candle’s high or low to trap traders—paired with optional filters such as moving averages, color change candles, and strictness rules for better signal accuracy. 🔍 What is a Liquidity Sweep? A liquidity sweep occurs when the price briefly breaks the high or low of a previous candle and then reverses direction. These events often occur around key support/resistance zones and are used by institutional traders to trap retail positions before moving the price in the intended direction. 🟢 Bullish Liquidity Sweep Criteria The current candle is bullish (closes above its open). The low of the current candle breaks the low of the previous candle. The candle closes above the previous candle’s open. Optionally, in Strict mode, it must also close above the previous candle’s high. Optionally, it can be filtered to only show if the candle changed color from the previous one (e.g., red to green). Can be filtered to only show when the price is above or below a moving average (if MA filter is enabled). 🔴 Bearish Liquidity Sweep Criteria The current candle is bearish (closes below its open). The high of the current candle breaks the high of the previous candle. The candle closes below the previous candle’s open. Optionally, in Strict mode, it must also close below the previous candle’s low. Optionally, it can be filtered to only show if the candle changed color from the previous one (e.g., green to red). Can be filtered to only show when the price is above or below a moving average (if MA filter is enabled). ⚙️ Features & Customization ✅ Signal Strictness Choose between: Less Strict (default): Basic wick break and close conditions. Strict: Must close beyond the wick of the previous candle. ✅ Color Change Candles Only Enable this to only show patterns when the candle color changes (e.g., from red to green or green to red). Helps filter fake-outs. ✅ Moving Average Filter (optional) Supports several types of MAs: SMA, EMA, WMA, VWMA, RMA, HMA Choose whether signals should only appear above or below the selected moving average. ✅ Custom Visuals Show short (BS) or full (Bull Sweep / Bear Sweep) labels Plot triangles or arrows to represent bullish and bearish sweeps Customize label and shape colors Optionally show/hide the moving average line ✅ Alerts Includes alert options for: Bullish sweep Bearish sweep Any sweep 📈 How to Use Add the indicator to your chart. Configure the strictness, color change, or MA filters based on your strategy. Observe signals where price is likely to reverse after taking out liquidity. Use with key support/resistance levels, order blocks, or volume zones for confluence. ⚠️ Note This tool is for educational and strategy-building purposes. Always confirm signals with other indicators, context, and sound risk management.
Pine Script®指標
由OLLIE_MAC提供
Liquidity Sweep Detector - PDH/PDL LevelsPrevious Day High/Low Liquidity Sweep Detector (Intraday Accurate) This indicator tracks the previous day's high and low using intraday data, rather than the daily candle, ensuring precise sweep detection across lower timeframes (15m to 4H). It monitors for liquidity sweeps—moments when price briefly moves above the previous high or below the previous low—and visually marks these events on the chart. Key Features Intraday-accurate PDH/PDL tracking Real-time sweep detection On-chart labels marking sweep events Toggleable table showing sweep status Alert conditions for PDH/PDL sweep triggers Best For Traders who use Smart Money Concepts (SMC), liquidity-based strategies, or look for stop hunts and reversal zones tied to key prior-day levels. Works well across FX, crypto, and indices on 15m, 1H, and 4H charts.
Pine Script®指標
由backtestbay提供
[TTM] ICT Sessions & Ranges🌟 Overview 🌟 The ICT Sessions & Ranges Indicator helps traders identify key intraday price levels by marking custom session highs/lows and opening ranges. It helps traders spot potential liquidity grabs, reversals, and breakout zones by tracking price behavior around these key areas 🌟 Session Highs & Lows – Liquidity Zones 🌟 Session highs and lows often attract price due to stop orders resting above or below them. These levels are frequently targeted during high-volatility moves. 🔹 Asia Session - Usually ranges in low volatility. - Highs/lows often get swept during early London. - Price may raid these levels, then reverse. 🔹 London Session - First major volatility of the day. - Highs/lows often tested or swept in New York. - Commonly forms the day’s true high or low. 🌟 Opening Range Concepts 🌟 The Opening Range is the first 15, 30, or 60 minutes of a session (e.g., New York). The high (ORH) and low (ORL) define the market’s initial balance and key reaction levels. 🔹 Breakout Trade - Price breaks ORH/ORL with momentum. - Signals directional intent. - Traders enter on the breakout, with stops inside the range. 🔹 Liquidity Raid - Price briefly breaks ORH/ORL to trigger stops. - Reverses after the sweep. - Look for structure shift and entry near FVG or OB. 🌟 Customizable Settings 🌟 The indicator includes 3 configurable ranges , each with: Start & End Time – Set any custom time window. Display Type – Choose Box (highlight range) or Lines (mark high/low). Color Settings – Set custom colors for boxes and lines. 🌟 Default Settings 🌟 Range 1 : 19:00–00:00 (Asia Session) Range 2 : 01:45–05:15 (London Session) Range 3 : 09:30–10:00 (NY Opening Range – 30m)
Pine Script®指標
由TheTickMagnet提供
12
Liquidity Sweep Filter Strategy [AlgoAlpha X PineIndicators]This strategy is based on the Liquidity Sweep Filter developed by AlgoAlpha. Full credit for the concept and original indicator goes to AlgoAlpha. The Liquidity Sweep Filter Strategy is a non-repainting trading system designed to identify liquidity sweeps, trend shifts, and high-impact price levels. It incorporates volume-based liquidation analysis, trend confirmation, and dynamic support/resistance detection to optimize trade entries and exits. This strategy helps traders: Detect liquidity sweeps where major market participants trigger stop losses and liquidations. Identify trend shifts using a volatility-based moving average system. Analyze volume distribution with a built-in volume profile visualization. Filter noise by differentiating between major and minor liquidity sweeps. How the Liquidity Sweep Filter Strategy Works 1. Trend Detection Using Volatility-Based Filtering The strategy applies a volatility-adjusted moving average system to determine trend direction: A central trend line is calculated using an EMA smoothed over a user-defined length. Upper and lower deviation bands are created based on the average price deviation over multiple periods. If price closes above the upper band, the strategy signals an uptrend. If price closes below the lower band, the strategy signals a downtrend. This approach ensures that trend shifts are confirmed only when price significantly moves beyond normal market fluctuations. 2. Liquidity Sweep Detection Liquidity sweeps occur when price temporarily breaks key levels, triggering stop-loss liquidations or margin call events. The strategy tracks swing highs and lows, marking potential liquidity grabs: Bearish Liquidity Sweeps – Price breaks a recent high, then reverses downward. Bullish Liquidity Sweeps – Price breaks a recent low, then reverses upward. Volume Integration – The strategy analyzes trading volume at each sweep to differentiate between major and minor sweeps. Key levels where liquidity sweeps occur are plotted as color-coded horizontal lines: Red lines indicate bearish liquidity sweeps. Green lines indicate bullish liquidity sweeps. Labels are displayed at each sweep, showing the volume of liquidated positions at that level. 3. Volume Profile Analysis The strategy includes an optional volume profile visualization, displaying how trading volume is distributed across different price levels. Features of the volume profile: Point of Control (POC) – The price level with the highest traded volume is marked as a key area of interest. Bounding Box – The profile is enclosed within a transparent box, helping traders visualize the price range of high trading activity. Customizable Resolution & Scale – Traders can adjust the granularity of the profile to match their preferred time frame. The volume profile helps identify zones of strong support and resistance, making it easier to anticipate price reactions at key levels. Trade Entry & Exit Conditions The strategy allows traders to configure trade direction: Long Only – Only takes long trades. Short Only – Only takes short trades. Long & Short – Trades in both directions. Entry Conditions Long Entry: A bullish trend shift is confirmed. A bullish liquidity sweep occurs (price sweeps below a key level and reverses). The trade direction setting allows long trades. Short Entry: A bearish trend shift is confirmed. A bearish liquidity sweep occurs (price sweeps above a key level and reverses). The trade direction setting allows short trades. Exit Conditions Closing a Long Position: A bearish trend shift occurs. The position is liquidated at a predefined liquidity sweep level. Closing a Short Position: A bullish trend shift occurs. The position is liquidated at a predefined liquidity sweep level. Customization Options The strategy offers multiple adjustable settings: Trade Mode: Choose between Long Only, Short Only, or Long & Short. Trend Calculation Length & Multiplier: Adjust how trend signals are calculated. Liquidity Sweep Sensitivity: Customize how aggressively the strategy identifies sweeps. Volume Profile Display: Enable or disable the volume profile visualization. Bounding Box & Scaling: Control the size and position of the volume profile. Color Customization: Adjust colors for bullish and bearish signals. Considerations & Limitations Liquidity sweeps do not always result in reversals. Some price sweeps may continue in the same direction. Works best in volatile markets. In low-volatility environments, liquidity sweeps may be less reliable. Trend confirmation adds a slight delay. The strategy ensures valid signals, but this may result in slightly later entries. Large volume imbalances may distort the volume profile. Adjusting the scale settings can help improve visualization. Conclusion The Liquidity Sweep Filter Strategy is a volume-integrated trading system that combines liquidity sweeps, trend analysis, and volume profile data to optimize trade execution. By identifying key price levels where liquidations occur, this strategy provides valuable insight into market behavior, helping traders make better-informed trading decisions. Key use cases for this strategy: Liquidity-Based Trading – Capturing moves triggered by stop hunts and liquidations. Volume Analysis – Using volume profile data to confirm high-activity price zones. Trend Following – Entering trades based on confirmed trend shifts. Support & Resistance Trading – Using liquidity sweep levels as dynamic price zones. This strategy is fully customizable, allowing traders to adapt it to different market conditions, timeframes, and risk preferences. Full credit for the original concept and indicator goes to AlgoAlpha.
Pine Script®策略
由PineIndicators提供
7