Sunmool's Silver Bullet Model Finder

昨天

ICT Silver Bullet Model Indicator - Complete Guide
📈 Overview
The ICT Silver Bullet Model indicator is a supplementary tool for utilizing ICT's (Inner Circle Trader) market structure analysis techniques. This indicator detects institutional liquidity hunting patterns and automatically identifies structural levels, helping traders analyze market structure more effectively.
🎯 Core Features
1. Structural Level Identification

STL (Short Term Low): Recent support levels formed in the short term
STH (Short Term High): Recent resistance levels formed in the short term
ITL (Intermediate Term Low): Stronger support levels with more significance
ITH (Intermediate Term High): Stronger resistance levels with more significance

2. Kill Zone Time Display

London Kill Zone: 02:00-05:00 (default)
New York Kill Zone: 08:30-11:00 (default)
These are the most active trading hours for institutional players where significant price movements occur

3. Smart Sweep Detection

Bear Sweep (🔻): Pattern where price sweeps below lows then recovers - Simply indicates sweep occurrence
Bull Sweep (🔺): Pattern where price sweeps above highs then declines - Simply indicates sweep occurrence

Important: Sweep labels only mark liquidity hunting locations, not directional bias.
🔧 Configuration Parameters
Basic Settings

Sweep Detection Lookback: Number of candles for sweep detection (default: 20)
Structure Point Lookback: Number of candles for structural point detection (default: 10)
Sweep Threshold: Percentage threshold for sweep validation (default: 0.1%)

Time Settings

London Kill Zone: Active hours for London session
New York Kill Zone: Active hours for New York session

Visualization Settings

Customizable colors for each level type
Enable/disable alert notifications

📊 How to Use
1. Chart Setup

Most effective on 1-minute to 1-hour timeframes
Recommended for major currency pairs (EUR/USD, GBP/USD, etc.)
Also applicable to cryptocurrencies and indices

2. Signal Interpretation
🔻 Bear Sweep / 🔺 Bull Sweep Labels

Simply indicate liquidity hunting occurrence points
Not directional bias indicators
Reference for understanding overall context on HTF

🟢 Silver Bullet Long (Huge Green Triangle)

After Bear Sweep occurrence
Within Kill Zone timeframe
Current price positioned above swept level
→ Actual BUY entry signal

🔴 Silver Bullet Short (Huge Red Triangle)

After Bull Sweep occurrence
Within Kill Zone timeframe
Current price positioned below swept level
→ Actual SELL entry signal

3. Risk Management

Use swept levels as stop-loss reference points
Approach signals outside Kill Zone hours with caution
Recommended to use alongside other technical analysis tools

💡 Trading Strategies
Silver Bullet Strategy

Preparation Phase: Monitor charts 30 minutes before Kill Zone
Sweep Observation: Identify liquidity hunting points with 🔻🔺 labels (reference only)
Entry: Enter ONLY when huge triangle Silver Bullet signal appears within Kill Zone
Take Profit: Target opposite structural level or 1:2 reward ratio
Stop Loss: Beyond the swept level

Important: Small sweep labels are NOT trading signals!
Multi-Timeframe Approach
Step 1: HTF (Higher Time Frame) Sweep Reference

Observe 🔻🔺 sweep labels on 4-hour and daily charts
Reference only sweeps occurring at major structural levels
HTF sweeps are used to identify liquidity hunting points
Reference only, not for directional bias

Step 2: Transition to LTF (Lower Time Frame)

Move to 15-minute, 5-minute, and 1-minute charts
Analyze LTF with reference to HTF sweep information
Use STL, STH, ITL, ITH for precise entry point identification
Structural levels on LTF are the core of actual trading decisions
Only huge triangle (Silver Bullet) signals are actual entry signals

Recommended Usage

Identify overall sweep occurrence points on HTF (🔻🔺 labels)
Use this indicator on LTF to identify structural levels
Reference only huge triangle signals for actual trading during Kill Zone
Small sweep labels (🔻🔺) are for reference only, not entry signals

📋 Information Table Interpretation
Real-time information in the top-right table:

Kill Zone Status: Current active session status
Level Counts: Number of each structural level type

⚠️ Important Disclaimers

Backtesting results do not guarantee future performance
Exercise caution during high market volatility periods
Always apply proper risk management
Recommend comprehensive analysis with other analytical tools

🎓 Learning Resources

Study original ICT concepts through free YouTube educational content
Research Market Structure analysis techniques
Optimize through backtesting for personal use

🔬 Technical Implementation
Algorithm Logic

Pivot Point Detection: Uses TradingView's built-in pivot functions to identify swing highs and lows
Classification System: Automatically categorizes levels based on recent price action frequency
Sweep Validation: Confirms legitimate sweeps through price action analysis
Time-Based Filtering: Prioritizes signals during institutional active hours

Performance Optimization

Efficient array management prevents memory overflow
Dynamic level cleanup maintains chart clarity
Real-time calculation ensures minimal lag

🛠️ Customization Tips

Adjust lookback periods based on market volatility
Modify kill zone times for different market sessions
Experiment with sweep threshold for different instruments
Color-code levels according to personal preference

📈 Expected Outcomes
When properly implemented, this indicator can help traders:

Identify high-probability reversal points
Time entries with institutional flow
Reduce false signals through kill zone filtering
Improve risk-to-reward ratios

This indicator automates ICT's concepts into a user-friendly tool that can be enhanced through continuous learning and practical application. Success depends on understanding the underlying market structure principles and combining them with proper risk management techniques.

昨天

發行說明

Overview
This indicator automatically detects Silver Bullet models based on ICT (Inner Circle Trader) methodology. It analyzes market liquidity sweeps and structural points to identify high-probability entry opportunities.
Key Components
1. Structural Points

STL (Short Term Low) - Displayed in blue
STH (Short Term High) - Displayed in orange
ITL (Intermediate Term Low) - Displayed in purple
ITH (Intermediate Term High) - Displayed in green

⚠️ Important: Always check STL, STH, ITL, ITH on LTF (Lower Time Frame)!
2. Sweep Signals

BEAR Sweep: Triggered when Lower Low occurs (red label)
BULL Sweep: Triggered when Higher High occurs (red label)

⚠️ Important: Sweep signals should be observed on HTF (Higher Time Frame)!
3. Kill Zones

London Kill Zone: 02:00-05:00 (yellow background)
New York Kill Zone: 08:30-11:00 (yellow background)

4. Silver Bullet Signals

🔺 Long Signal: BEAR Sweep + Kill Zone + Price returns above swept level
🔻 Short Signal: BULL Sweep + Kill Zone + Price returns below swept level

How to Use

Check Sweep Signals on HTF: First, look for BEAR/BULL Sweep signals on 4H, 1D charts
Analyze Structural Points on LTF: After sweep confirmation, analyze related STL/STH/ITL/ITH levels on 15M, 5M charts
Wait for Kill Zone: Wait for London or New York Kill Zone timing
Enter on Silver Bullet: Take entries when Sweep + Structure + Kill Zone conditions all align

Parameter Settings

Sweep Detection Lookback: Number of candles for sweep detection (default: 20)
Structure Point Lookback: Number of candles for structural point detection (default: 10)
Sweep Threshold: Sweep threshold percentage (default: 0.1%)

⚠️ Important Disclaimer
This indicator is only an auxiliary tool. Complex market context and overall trend analysis must be judged directly by the trader. Do not trade mechanically based on signals alone - always perform additional confirmation and risk management.

📊 Multi-Timeframe Analysis Recommendation
Analysis TypeRecommended TimeframePurposePrioritySweep DetectionHTF (4H, 1D, 1W)Identify major liquidity sweeps1stStructural PointsLTF (5M, 15M, 1H)Analyze related structural levels2ndKill Zone TimingEntry TF (5M, 15M)Execute trades during optimal times3rdOverall BiasHTF (1D, 1W)Confirm market direction alignmentSupporting
🎯 Trading Strategy Framework

Sweep: First identify liquidity sweep signals on HTF
Structure: Analyze related structural points on LTF after sweep confirmation
Bias: Confirm overall market direction aligns with the setup
Timing: Enter during Kill Zone on entry timeframe
Management: Use proper risk management and position sizing

昨天

發行說明

Overview
This indicator automatically detects Silver Bullet models based on ICT (Inner Circle Trader) methodology. It analyzes structural points to identify high-probability entry opportunities, but traders must manually identify sweeps on HTF themselves.
Key Components
1. Structural Points - Check on LTF

STL (Short Term Low) - Blue label with price display
STH (Short Term High) - Orange label with price display
ITL (Intermediate Term Low) - Purple label with price display
ITH (Intermediate Term High) - Green label with price display

📍 Each label displays the exact level price (e.g., "STL\n1.2345")
2. Kill Zones

London Kill Zone: 02:00-05:00 (yellow background)
New York Kill Zone: 08:30-11:00 (yellow background)

3. Silver Bullet Signals (Automatic Detection)

🔺 Long Signal: Green triangle below chart when conditions met
🔻 Short Signal: Red triangle above chart when conditions met

Proper Usage Method (Critical!)
Step 1: Manual Sweep Identification on HTF ⚠️
This step is NOT automated by the indicator. Traders must do this manually.

Check on 4H, 1D, 1W charts:

Buy-side Liquidity Sweep: Price breaks above previous high then reverses down
Sell-side Liquidity Sweep: Price breaks below previous low then reverses up
Higher High / Lower Low pattern confirmation
Record the swept level and timing



Step 2: Structural Point Confirmation on LTF

Check on 5M, 15M, 1H charts for STL/STH/ITL/ITH levels
Identify structural points related to HTF sweeps
Confirm labels and prices automatically displayed by indicator

Step 3: Execute During Kill Zone

Wait for London or New York Kill Zone timing
Monitor for indicator's Silver Bullet signals
Additional confirmation (candle patterns, volume, market context) before entry

Parameter Settings

Sweep Detection Lookback: Internal calculation use (default: 20)
Structure Point Lookback: Structural point sensitivity (default: 10)
Sweep Threshold: Internal threshold value (default: 0.1%)

⚠️ Critical Disclaimers

Manual Sweep Confirmation Required: This indicator does NOT automatically detect actual liquidity sweeps on HTF. Traders must manually analyze HTF charts for sweep patterns.
Auxiliary Tool Only: Structural points and Kill Zones are for reference only. Final entry decisions require comprehensive trader analysis.
Contextual Analysis Essential: Consider overall market trends, news, and broader market conditions in your analysis.


📊 Multi-Timeframe Analysis Framework
Analysis TypeTimeframeMethodResponsibilitySweep DetectionHTF (4H, 1D, 1W)Manual Analysis👤 TraderStructural PointsLTF (5M, 15M, 1H)Indicator Labels🤖 AutomatedKill Zone TimingEntry TF (5M, 15M)Background Color🤖 AutomatedEntry SignalsEntry TFTriangle Shapes🤖 Automated
🎯 Complete Trading Process

🔍 HTF Analysis (Manual): Identify liquidity sweeps on higher timeframes
📍 LTF Structure (Indicator): Use indicator labels for precise structural levels
⏰ Timing (Indicator): Wait for Kill Zone activation
🎯 Entry (Indicator + Manual): Combine signal with personal analysis
⚖️ Management: Apply proper risk management and position sizing

Remember: The indicator provides structural analysis and timing, but sweep identification and final trading decisions remain the trader's responsibility.

昨天

發行說明

Overview
This indicator automatically detects and displays structural points based on ICT (Inner Circle Trader) methodology. It focuses purely on structural level analysis, while actual trading decisions must be made by the trader.
Key Features
1. Automatic Structural Point Detection & Display 📍

STL (Short Term Low)

Blue label display
Label content: "STL\n1.2345" (includes actual price)


STH (Short Term High)

Orange label display
Label content: "STH\n1.2380" (includes actual price)


ITL (Intermediate Term Low)

Purple label display (larger than STL)
Label content: "ITL\n1.2320" (includes actual price)


ITH (Intermediate Term High)

Green label display (larger than STH)
Label content: "ITH\n1.2400" (includes actual price)



2. Kill Zone Visualization 🕐

London Kill Zone: 02:00-05:00 (yellow background)
New York Kill Zone: 08:30-11:00 (yellow background)
Visual indication of high-activity trading periods

3. Real-time Information Table 📊
Top-right display showing:

Kill Zone status (ACTIVE/INACTIVE)
Count of each structural point type (STL/STH/ITL/ITH Count)

Configuration Options
Core Settings

Structure Point Lookback: Structural point detection sensitivity (default: 10)

Higher values: Detect only major levels (fewer but stronger levels)
Lower values: Detect more levels (detailed analysis)


Sweep Threshold: Level classification threshold (default: 0.1%)

Adjusts accuracy of structural point classification



Visual Settings

Kill Zone Times: Adjustable London/New York session times
Color Settings: Customizable colors for each structural point type

Proper Usage Method
Step 1: HTF Analysis (Manual - Critical! ⚠️)
Tasks that traders must perform manually:

Check liquidity sweeps on 4H, 1D, 1W charts
Buy-side Sweep: Price breaks above previous high then reverses down
Sell-side Sweep: Price breaks below previous low then reverses up
Market bias and overall trend analysis

Step 2: LTF Structural Point Utilization (Indicator Support)

Use indicator on 15M, 5M, 1H charts
Set precise entry/exit levels in conjunction with HTF analysis
Focus trading timing around Kill Zone periods

Step 3: Comprehensive Analysis & Execution

HTF bias + LTF structural points + Kill Zone timing
Additional confirmation: Candlestick patterns, volume, market news
Risk management and position sizing

Backtesting Support 📈

5000 Bar Range: Comprehensive historical data analysis
Timeframe Coverage:

15-minute: 2-3 months
1-hour: 6-8 months
4-hour: 2-3 years
Daily: 13-20 years



⚠️ Important Limitations & Disclaimers

No Automatic Sweep Detection: This indicator does NOT automatically detect liquidity sweeps on HTF. Traders must perform this analysis manually.
Structural Points Only: Does not provide entry/exit signals or directional bias. Displays level information only.
Auxiliary Tool Role: Final trading decisions must be based on trader's comprehensive analysis.
Market Context Consideration: News, economic indicators, and overall market sentiment must be analyzed separately.


📊 Technical Specifications
Data Management

Maximum Labels: 500 structural point labels
Array Capacity:

STL/STH: 300 levels each
ITL/ITH: 200 levels each


Display Range: 5000 bars from current position

Performance Characteristics

Lag: Structural points appear after lookback period completion
Accuracy: Based on pivot point calculations with configurable sensitivity
Resource Usage: Optimized for smooth real-time operation

Multi-Timeframe Recommendation
Analysis TypeTimeframeResponsibilityToolSweep AnalysisHTF (4H, 1D, 1W)👤 ManualTrader's EyesStructural LevelsLTF (5M, 15M, 1H)🤖 AutomatedThis IndicatorKill Zone TimingEntry TF🤖 AutomatedThis IndicatorFinal DecisionAll TFs👤 ManualTrader's Judgment
🎯 Best Practices

Start with HTF: Always begin analysis on higher timeframes
Use Multiple Confirmations: Don't rely on structural points alone
Respect Kill Zones: Focus activity during London/NY sessions
Practice Risk Management: Use appropriate position sizing
Keep Learning: ICT concepts require continuous study and practice

Remember: This indicator provides the foundation for structural analysis, but successful trading requires comprehensive market understanding and disciplined execution.

昨天

發行說明

Sunmool's Silver Bullet Model Finder
📊 Overview
This indicator is an advanced tool for automatically identifying and classifying structural points based on ICT (Inner Circle Trader) concepts. It tracks STL (Short Term Low), STH (Short Term High), ITL (Intermediate Term Low), and ITH (Intermediate Term High) in real-time, with dynamic reclassification as market structure evolves.
🎯 Key Features
1. Dynamic Structural Point Classification

STL/STH: Short-term structural lows/highs
ITL/ITH: Intermediate-term structural lows/highs
Automatic reclassification: When new extremes appear, existing ITL/ITH automatically become STL/STH

2. Kill Zone Time Display

London Kill Zone: 02:00 - 05:00
New York Kill Zone: 08:30 - 11:00
Visual background highlighting of major institutional trading hours

3. Backtest Optimization

Stores up to 2000 structural points
Displays historical data up to 10000 bars back
Performance optimized for extended backtesting periods

⚙️ Configuration Options

Structure Point Lookback: Detection period for structural points (Default: 10)
Sweep Threshold: Sweep threshold percentage (Default: 0.1%)
Kill Zone Times: Customizable London/New York session hours
Color Settings: Individual color customization for each structural point type

🔍 Usage Instructions
📈 HTF (Higher Time Frame) Analysis First
⚠️ IMPORTANT: This indicator alone is NOT sufficient!

Always start by manually analyzing structural points and sweep patterns on higher timeframes (Daily, 4H, 1H)
Personally verify meaningful structure formation and sweep occurrences on HTF
Only after HTF structure confirmation, move to lower timeframes for entry points

📊 Step-by-Step Approach for High-Probability Trading

HTF Structure Analysis → Identify major structural points on Daily/4H
Sweep Confirmation → Manually verify liquidity grab patterns on HTF
LTF Entry → Search for precise entry points on 15M/5M/1M
Use This Indicator → Reference structural points on LTF as a supplementary tool

📋 Information Table
Real-time display in the top-right corner shows:

Kill Zone activation status
Count of each structural point type
Current market structure summary

⚠️ Important Disclaimers

This indicator is a supplementary tool. Never use it standalone without HTF analysis
Always manually verify structure and sweeps on HTF before trading
Backtest results may differ from live trading performance
Implement strict risk management and position sizing

🔧 Technical Features

Built on Pine Script v6
Performance optimization through dynamic memory management
Real-time structural point reclassification algorithm
Support for large-scale backtest data processing


📌 Remember: The key to successful ICT trading is accurate structural analysis on higher timeframes. This indicator is merely a tool to assist in that process.