PINE LIBRARY
已更新 eHarmonicpatternsExtended

Library "eHarmonicpatternsExtended"
Library provides an alternative method to scan harmonic patterns. This is helpful in reducing iterations. Republishing as new library instead of existing eHarmonicpatterns because I need that copy for existing scripts.
scan_xab(bcdRatio, err_min, err_max, patternArray) Checks if bcd ratio is in range of any harmonic pattern
Parameters:
bcdRatio: AB/XA ratio
err_min: minimum error threshold
err_max: maximum error threshold
patternArray: Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten.
scan_abc_axc(abcRatio, axcRatio, err_min, err_max, patternArray) Checks if abc or axc ratio is in range of any harmonic pattern
Parameters:
abcRatio: BC/AB ratio
axcRatio: XC/AX ratio
err_min: minimum error threshold
err_max: maximum error threshold
patternArray: Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten.
scan_bcd(bcdRatio, err_min, err_max, patternArray) Checks if bcd ratio is in range of any harmonic pattern
Parameters:
bcdRatio: CD/BC ratio
err_min: minimum error threshold
err_max: maximum error threshold
patternArray: Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten.
scan_xad_xcd(xadRatio, xcdRatio, err_min, err_max, patternArray) Checks if xad or xcd ratio is in range of any harmonic pattern
Parameters:
xadRatio: AD/XA ratio
xcdRatio: CD/XC ratio
err_min: minimum error threshold
err_max: maximum error threshold
patternArray: Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten.
isHarmonicPattern(x, a, b, c, d, flags, errorPercent) Checks for harmonic patterns
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
d: D coordinate value
flags: flags to check patterns. Send empty array to enable all
errorPercent: Error threshold
Returns: [patternArray, patternLabelArray] Array of boolean values which says whether valid pattern exist and array of corresponding pattern names
isHarmonicProjection(x, a, b, c, flags, errorPercent) Checks for harmonic pattern projection
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
flags: flags to check patterns. Send empty array to enable all
errorPercent: Error threshold
Returns: [patternArray, patternLabelArray] Array of boolean values which says whether valid pattern exist and array of corresponding pattern names.
get_prz_range(x, a, b, c, patternArray, errorPercent, start_adj, end_adj) Provides PRZ range based on BCD and XAD ranges
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
patternArray: Pattern flags for which PRZ range needs to be calculated
errorPercent: Error threshold
start_adj: - Adjustments for entry levels
end_adj: - Adjustments for stop levels
Returns: [dStart, dEnd] Start and end of consolidated PRZ range
get_prz_range_xad(x, a, b, c, patternArray, errorPercent, start_adj, end_adj) Provides PRZ range based on XAD range only
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
patternArray: Pattern flags for which PRZ range needs to be calculated
errorPercent: Error threshold
start_adj: - Adjustments for entry levels
end_adj: - Adjustments for stop levels
Returns: [dStart, dEnd] Start and end of consolidated PRZ range
Library provides an alternative method to scan harmonic patterns. This is helpful in reducing iterations. Republishing as new library instead of existing eHarmonicpatterns because I need that copy for existing scripts.
scan_xab(bcdRatio, err_min, err_max, patternArray) Checks if bcd ratio is in range of any harmonic pattern
Parameters:
bcdRatio: AB/XA ratio
err_min: minimum error threshold
err_max: maximum error threshold
patternArray: Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten.
scan_abc_axc(abcRatio, axcRatio, err_min, err_max, patternArray) Checks if abc or axc ratio is in range of any harmonic pattern
Parameters:
abcRatio: BC/AB ratio
axcRatio: XC/AX ratio
err_min: minimum error threshold
err_max: maximum error threshold
patternArray: Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten.
scan_bcd(bcdRatio, err_min, err_max, patternArray) Checks if bcd ratio is in range of any harmonic pattern
Parameters:
bcdRatio: CD/BC ratio
err_min: minimum error threshold
err_max: maximum error threshold
patternArray: Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten.
scan_xad_xcd(xadRatio, xcdRatio, err_min, err_max, patternArray) Checks if xad or xcd ratio is in range of any harmonic pattern
Parameters:
xadRatio: AD/XA ratio
xcdRatio: CD/XC ratio
err_min: minimum error threshold
err_max: maximum error threshold
patternArray: Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten.
isHarmonicPattern(x, a, b, c, d, flags, errorPercent) Checks for harmonic patterns
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
d: D coordinate value
flags: flags to check patterns. Send empty array to enable all
errorPercent: Error threshold
Returns: [patternArray, patternLabelArray] Array of boolean values which says whether valid pattern exist and array of corresponding pattern names
isHarmonicProjection(x, a, b, c, flags, errorPercent) Checks for harmonic pattern projection
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
flags: flags to check patterns. Send empty array to enable all
errorPercent: Error threshold
Returns: [patternArray, patternLabelArray] Array of boolean values which says whether valid pattern exist and array of corresponding pattern names.
get_prz_range(x, a, b, c, patternArray, errorPercent, start_adj, end_adj) Provides PRZ range based on BCD and XAD ranges
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
patternArray: Pattern flags for which PRZ range needs to be calculated
errorPercent: Error threshold
start_adj: - Adjustments for entry levels
end_adj: - Adjustments for stop levels
Returns: [dStart, dEnd] Start and end of consolidated PRZ range
get_prz_range_xad(x, a, b, c, patternArray, errorPercent, start_adj, end_adj) Provides PRZ range based on XAD range only
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
patternArray: Pattern flags for which PRZ range needs to be calculated
errorPercent: Error threshold
start_adj: - Adjustments for entry levels
end_adj: - Adjustments for stop levels
Returns: [dStart, dEnd] Start and end of consolidated PRZ range
發行說明
v2Minor correction :(
發行說明
v3Added:
getSupportedPatterns(patternLabelArray) Returns the list of supported patterns in order
Parameters:
patternLabelArray: Supported Patterns
get_projection_range(x, a, b, c, patternArray, errorPercent, start_adj, end_adj) Provides Projection range based on BCD and XAD ranges
Parameters:
x: X coordinate value
a: A coordinate value
b: B coordinate value
c: C coordinate value
patternArray: Pattern flags for which PRZ range needs to be calculated
errorPercent: Error threshold
start_adj: - Adjustments for entry levels
end_adj: - Adjustments for stop levels
Returns: [startRange, endRange] Array containing start and end ranges
發行說明
v4發行說明
v5Removed:
scan_xab(bcdRatio, err_min, err_max, patternArray)
Checks if bcd ratio is in range of any harmonic pattern
scan_abc_axc(abcRatio, axcRatio, err_min, err_max, patternArray)
Checks if abc or axc ratio is in range of any harmonic pattern
scan_bcd(bcdRatio, err_min, err_max, patternArray)
Checks if bcd ratio is in range of any harmonic pattern
scan_xad_xcd(xadRatio, xcdRatio, err_min, err_max, patternArray)
Checks if xad or xcd ratio is in range of any harmonic pattern
發行說明
v6Minor logical updates
Pine腳本庫
秉持 TradingView 一貫的共享精神,作者將此 Pine 程式碼發佈為開源庫,讓社群中的其他 Pine 程式設計師能夠重複使用。向作者致敬!您可以在私人專案或其他開源發佈中使用此庫,但在公開發佈中重複使用該程式碼需遵守社群規範。
Trial - trendoscope.io/trial
Subscribe - trendoscope.io/pricing
Blog - docs.trendoscope.io
Subscribe - trendoscope.io/pricing
Blog - docs.trendoscope.io
免責聲明
這些資訊和出版物並不意味著也不構成TradingView提供或認可的金融、投資、交易或其他類型的意見或建議。請在使用條款閱讀更多資訊。
Pine腳本庫
秉持 TradingView 一貫的共享精神,作者將此 Pine 程式碼發佈為開源庫,讓社群中的其他 Pine 程式設計師能夠重複使用。向作者致敬!您可以在私人專案或其他開源發佈中使用此庫,但在公開發佈中重複使用該程式碼需遵守社群規範。
Trial - trendoscope.io/trial
Subscribe - trendoscope.io/pricing
Blog - docs.trendoscope.io
Subscribe - trendoscope.io/pricing
Blog - docs.trendoscope.io
免責聲明
這些資訊和出版物並不意味著也不構成TradingView提供或認可的金融、投資、交易或其他類型的意見或建議。請在使用條款閱讀更多資訊。