立即開始

頻帶和通道

SmartMind2The MACD (Moving Average Convergence Divergence) is a popular technical indicator in trading, primarily used to detect trends and possible reversal points. How is the MACD structured? The MACD indicator consists of three components: MACD Line: Calculated as the difference between two exponential moving averages (EMAs), commonly 12 and 26 periods. Formula: MACD Line = 𝐸 𝑀 𝐴 12 ( Price ) − 𝐸 𝑀 𝐴 26 ( Price ) MACD Line=EMA 12 ​ (Price)−EMA 26 ​ (Price) Signal Line: An exponential moving average (usually 9 periods) of the MACD line. Formula: Signal Line = 𝐸 𝑀 𝐴 9 ( MACD Line ) Signal Line=EMA 9 ​ (MACD Line) Histogram: Graphically represents the difference between the MACD line and the Signal line. Formula: Histogram = MACD Line − Signal Line Histogram=MACD Line−Signal Line Interpretation of MACD: Buy Signal: Occurs when the MACD line crosses above the signal line (bullish signal). Sell Signal: Occurs when the MACD line crosses below the signal line (bearish signal). Trend Reversal: A divergence between price movements and the MACD indicates a potential reversal (e.g., rising prices with a falling MACD).
Pine Script®指標
由Lauraruhland提供
Official USD Staggered Bands - ArgentinaOfficial USD Staggered Bands - Argentina The Central Bank, under the administration of Javier Milei (La Libertad Avanza), announced on Friday, April 11, 2025, a series of measures to eliminate the so-called "exchange rate restriction." In this new phase, the dollar's exchange rate on the Free Exchange Market (MLC) will be able to fluctuate within a band between $1,000 and $1,400 , the limits of which will be expanded at a rate of 1% monthly. The lines evolve daily, increasing as the public administration predicts. This way, you can know the likelihood of a Central Bank intervention to correct the variation and return the peso to a price within the band. The script runs under the ticker USDARS
Pine Script®指標
由arielm00提供
Dual Session ORB S/R Lines Pro by Yendor_BShort description: Clean opening-range breakout support/resistance lines for London and US sessions with confirmed breakout labels and alert-ready signals. UTC-based, adjustable start point, customizable styling, minimal clutter. Detailed description: What it does: Captures the Opening Range (default first 15 minutes) for London and New York (US) sessions in UTC, plots the high and low as support/resistance lines, and marks confirmed breakouts when price closes beyond those levels. Lines can begin at either the range end or session start and persist for the configured session length. Key Features: ORB defined over the first N minutes after session open (configurable, default 15). Two sessions: London and US (New York) with separate start times. High/low support & resistance lines per session: Selectable start point: Range End or Session Start. Independently customizable color, width, and style (solid/dashed/dotted) for each high and low. Confirmed breakout labels: only on the first candle that closes beyond the ORB high or low after the range completes (prior close must be inside). Alerts and alertconditions for breakout long/short per session, usable in TradingView’s alert dialog. Fully UTC-based. Works on any timeframe; 1-minute or 5-minute recommended for precision. Minimal visual clutter; no persistent shaded boxes in this version. Inputs explained: ORB Duration (minutes): Length of the opening range used to calculate session high and low. Session Length (hours): How long the S/R lines remain active (typically full session). London / US Start (UTC): Session open times in UTC. Line Start Point: Choose whether the lines begin at the range end or at the session start. High/Low Styling: Independent color, thickness, and style for each session’s high and low. Breakout Labels: Toggle one-time confirmed breakout annotations. Alerts: Enable breakout alert messages. Example workflows: Monitor the first 15 minutes of the London session. After the range, wait for a candle to close beyond the high or low for a confirmed breakout. Use the label or alert to trigger entry logic (retest, continuation, etc.). Repeat for the US session; compare overlaps for higher conviction. Alert setup: Open the Alerts panel. Choose one of the built-in alertconditions: London Breakout Long, London Breakout Short, US Breakout Long, US Breakout Short. Set frequency to Once Per Bar Close. Customize notification/webhook payload if automating. Preset suggestions: Standard London ORB: 15 minute range, lines from range end, green high / lime low. Standard US ORB: 15 minute range, lines from range end, blue high / aqua low. Overlap Bias: Both sessions active, lines start from session start, differentiated styles. Tips & best practices: Combine with external volume or volatility filters to reduce false breakouts. Use on correlated pairs to observe consistent session structure. Treat broken ORB levels as flipped support/resistance on revisit. Prefer confirmed closes beyond lines rather than wick touches. Limitations / disclaimer: Provides structural visualization and breakout signaling; does not guarantee profitability. Always apply proper risk management and confirm with additional context. Backtest settings before live use. Tags: #ORB #OpeningRangeBreakout #SessionTrading #LondonSession #NewYorkSession #SupportResistance #Breakout #Intraday #Pinev6 #TradingView #Forex #TrendStructure #Alerts #USD #EURUSD #TradingSignals #UTCBased #PriceAction #MarketStructure #IntradayBreakouts
Pine Script®指標
由Yendor_B提供
GCM Volatility-Adaptive Trend ChannelScript Description Name: GCM Volatility-Adaptive Trend Channel (GCM VATC) Overview The GCM Volatility-Adaptive Trend Channel (VATC) is a comprehensive trading tool that merges the low-lag, smooth-trending capabilities of the Jurik Moving Average (JMA) with the classic volatility analysis of Bollinger Bands (BB). By displaying both trend and volatility in a single, intuitive interface, this indicator aims to help traders see when a trend is stable versus when it's becoming volatile and might be poised for a change. Core Components: JMA Trend System: At its core are three dynamically colored JMA lines (Baseline, Fast, and Slow) that provide a clear view of trend direction. The lines change color based on their slope, offering immediate visual feedback on momentum. A colored ribbon between the Baseline and Fast JMA visualizes shorter-term momentum shifts. Standard Bollinger Bands: Layered on top are standard Bollinger Bands. Calculated from the price, these bands serve as a classic measure of market volatility. They help identify periods where the market is expanding (high volatility) or contracting (low volatility). How to Use It By combining these two powerful concepts, this indicator provides a unified view of both trend and volatility. It can help traders to: Identify the primary trend direction using the smooth JMA lines. Gauge the strength and stability of that trend. See when the market is becoming volatile (bands widening) or consolidating (bands contracting), which can often precede a significant price move or a change in trend. A Note on Originality & House Rules Compliance This indicator does not introduce a new mathematical formula. Instead, its strength lies in the thoughtful combination of two well-respected, publicly available concepts: the Jurik Moving Average and Bollinger Bands. The JMA implementation is a standard public version. The goal was to create a practical, all-in-one tool for trend and volatility analysis. This script is published as fully open-source in compliance with TradingView's House Rules. It utilizes standard, publicly available algorithms and does not contain any protected or hidden code. Settings All lengths, sources, and colors for the JMA lines and Bollinger Bands are fully customizable in the settings menu, allowing you to tailor the indicator to your specific trading style and asset. I hope with this indicator Traders even Beginner can can control their emotions which increase the probabilities of the winning rates and cutting the losing strength Purposely I Didn't plant the High low or Buy Sell signals in the chart. Because everything is in the chart where volatility Signal with the Bollinger Band and Buy Sell Signal in the JMA Dynamic colors. and that's enough to decide when to take trade and when not to. Thank You and Happy Trading
Pine Script®指標
由uniGram提供
5
Smart MTF Bias Detector v3 (Debug)Here's a breakdown of the "Smart MTF Bias Detector v3 (Debug)" indicator's five main filters: Main Trend (Multi-Timeframe Heikin Ashi) The green/red background indicates the trend from Heikin Ashi candles on the H1 timeframe (or your set timeframe). If the Heikin Ashi candle closes above its open, the background is green (indicating an upward bias). If the Heikin Ashi candle closes below its open, the background is red (indicating a downward bias). Short-Term Trend Filter (EMA50) The yellow line represents the EMA50. Buy only when the price closes above the EMA50. Sell only when the price closes below the EMA50. Abnormal Buy/Sell Pressure Detection (Volume Spike) Purple dots signify candles where the volume is greater than the SMA (Simple Moving Average) of volume over N previous candles, multiplied by a specified multiplier. This confirms there's "force" driving the price up or serious selling pressure. Momentum Filter (Stochastic RSI) Blue upward triangles and orange downward triangles indicate when %K crosses %D. It uses Oversold/Overbought targets (20/80) to avoid crosses in the middle ranges. Pivot Break (Fractal Breakout) Red "X" marks represent Fractal Highs, and green "X" marks represent Fractal Lows. Red/green up/down arrows indicate breakouts of these levels (e.g., a previous High being broken means an upward breakout, or a previous Low being broken means a downward breakout). BUY Signal Conditions A BUY signal will be generated when: The background is green (HTF Trend ↑). The Stoch RSI crosses up from below the Oversold zone (blue arrow). A Fractal Low breakout occurs (Fract UP arrow). The price is above the EMA50. There is a Volume Spike (purple dot). SELL Signal Conditions A SELL signal will be generated when: The background is red (HTF Trend ↓). The Stoch RSI crosses down from above the Overbought zone (orange arrow). A Fractal High breakout occurs (Fract DOWN arrow). The price is below the EMA50. There is a Volume Spike (purple dot).
Pine Script®指標
由tai239提供
1
AI's Opinion Trading System V21. Complete Summary of the Indicator Script AI’s Opinion Trading System V2 is an advanced, multi-factor trading tool designed for the TradingView platform. It combines several technical indicators (moving averages, RSI, MACD, ADX, ATR, and volume analysis) to generate buy, sell, and hold signals. The script features a customizable AI “consensus” engine that weighs multiple indicator signals, applies user-defined filters, and outputs actionable trade instructions with clear stop loss and take profit levels. The indicator also tracks sentiment, volume delta, and allows for advanced features like pyramiding (adding to positions), custom stop loss/take profit prices, and flexible signal confirmation logic. All key data and signals are displayed in a dynamic, color-coded table on the chart for easy review. 2. Full Explanation of the Table The table is a real-time dashboard summarizing the indicator’s logic and recommendations for the most recent bars. It is color-coded for clarity and designed to help traders quickly understand market conditions and AI-driven trade signals. Columns (from left to right): Column Name What it Shows Bar The time context: “Now” for the current bar, then “Bar -1”, “Bar -2”, etc. for previous bars. Raw Consensus The raw AI consensus for each bar: “Buy”, “Sell”, or “-” (neutral). Up Vol The amount of volume on up (rising) bars. Down Vol The amount of volume on down (falling) bars. Delta The difference between up and down volume. Green if positive, red if negative, gray if neutral. Close The closing price for each bar, color-coded by price change. Sentiment Diff The difference between the close and average sentiment price (a custom sentiment calculation). Lookback The number of bars used for sentiment calculation (if enabled). ADX The ADX value (trend strength). ATR The ATR value (volatility measure). Vol>Avg “Yes” (green) if volume is above average, “No” (red) otherwise. Confirm Whether the AI signal is confirmed over the required bars. Logic Output The AI’s interpreted signal after applying user-selected logic: “Buy”, “Sell”, or “-”. Final Action The final signal after all filters: “Buy”, “Sell”, or “-”. Trade Instruction A plain-English instruction: Buy/Sell/Add/Hold/No Action, with price, stop loss, and take profit. Color Coding: Green: Positive/bullish values or signals Red: Negative/bearish values or signals Gray: Neutral or inactive Blue background: For all table cells, for visual clarity White text: Default, except for color-coded cells 3. Full User Instructions for Every Input/Style Option Below are plain-language instructions for every user-adjustable option in the indicator’s input and style pages: Inputs Table Location What it does: Sets where the summary table appears on your chart. How to use: Choose from 9 positions (Top Left, Top Center, Top Right, etc.) to avoid overlapping with other chart elements. Decimal Places What it does: Controls how many decimal places prices and values are displayed with. How to use: Increase for assets with very small prices (e.g., SHIB), decrease for stocks or forex. Show Sentiment Lookback? What it does: Shows or hides the “Lookback” column in the table, which displays how many bars are used in the sentiment calculation. How to use: Turn off if you want a simpler table. AI View Mode What it does: Selects the logic for how the AI combines signals from different indicators. Majority: Follows the most common signal among all indicators. Weighted: Uses custom weights for each type of signal. Custom: Lets you define your own logic (see below). How to use: Pick the logic style that matches your trading philosophy. AI Consensus Weight / Vol Delta Weight / Sentiment Weight What they do: When using “Weighted” AI View Mode, these let you set how much influence each factor (indicator consensus, volume delta, sentiment) has on the final signal. How to use: Increase a weight to make that factor more important in the AI’s decision. Custom AI View Logic What it does: Lets advanced users write their own logic for when the AI should signal a trade (e.g., “ai==1 and delta>0 and sentiment>0”). How to use: Only use if you understand basic boolean logic. Use Custom Stop Loss/Take Profit Prices? What it does: If enabled, you can enter your own fixed stop loss and take profit prices for buys and sells. How to use: Turn on to override the auto-calculated SL/TP and enter your desired prices below. Custom Buy/Sell Stop Loss/Take Profit Price What they do: If custom SL/TP is enabled, these fields let you set exact prices for stop loss and take profit on both buy and sell trades. How to use: Enter your preferred price, or leave at 0 for auto-calculation. Sentiment Lookback What it does: Sets how many bars the sentiment calculation should look back. How to use: Increase to smooth out sentiment, decrease for faster reaction. Max Pyramid Adds What it does: Limits how many times you can add to an existing position (pyramiding). How to use: Set to 1 for no adds, higher for more aggressive scaling in trends. Signal Preset What it does: Quick-sets a group of signal parameters (see below) for “Robust”, “Standard”, “Freedom”, or “Custom”. How to use: Pick a preset, or select “Custom” to adjust everything manually. Min Bars for Signal Confirmation What it does: Sets how many bars a signal must persist before it’s considered valid. How to use: Increase for more robust, less frequent signals; decrease for faster, but possibly less reliable, signals. ADX Length What it does: Sets the period for the ADX (trend strength) calculation. How to use: Longer = smoother, shorter = more sensitive. ADX Trend Threshold What it does: Sets the minimum ADX value to consider a trend “strong.” How to use: Raise for stricter trend confirmation, lower for more trades. ATR Length What it does: Sets the period for the ATR (volatility) calculation. How to use: Longer = smoother volatility, shorter = more reactive. Volume Confirmation Lookback What it does: Sets how many bars are used to calculate the average volume. How to use: Longer = more stable volume baseline, shorter = more sensitive. Volume Confirmation Multiplier What it does: Sets how much current volume must exceed average volume to be considered “high.” How to use: Increase for stricter volume filter. RSI Flat Min / RSI Flat Max What they do: Define the RSI range considered “flat” (i.e., not trending). How to use: Widen to be stricter about requiring a trend, narrow for more trades. Style Page Most style settings (such as plot colors, label sizes, and shapes) are preset in the script for visual clarity. You can adjust plot visibility and colors (for signals, stop loss, take profit) in the TradingView “Style” tab as with any indicator. Buy Signal: Shows as a green triangle below the bar when a buy is triggered. Sell Signal: Shows as a red triangle above the bar when a sell is triggered. Stop Loss/Take Profit Lines: Red and green lines for SL/TP, visible when a trade is active. SL/TP Labels: Small colored markers at the SL/TP levels for each trade. How to use: Toggle visibility or change colors in the Style tab if you wish to match your chart theme or preferences. In Summary This indicator is highly customizable—you can tune every aspect of the AI logic, risk management, signal filtering, and table display to suit your trading style. The table gives you a real-time, comprehensive view of all relevant signals, filters, and trade instructions. All inputs are designed to be intuitive—hover over them in TradingView for tooltips, or refer to the explanations above for details.
Pine Script®指標
由ChalkBoardAnalytics提供
ADR Plots + OverlayADR Plots + Overlay This tool calculates and displays Average Daily Range (ADR) levels on your chart, giving traders a quick visual reference for expected daily price movement. It plots guide levels above and below the daily open and shows how much of the day's typical range has already been covered—all in one interactive table and on-chart overlay. What It Does ADR Calculation: Uses daily high-low differences over a user-defined period (default 14 days), smoothed via RMA, SMA, EMA, or WMA to calculate the average daily range. Projected Levels: Plots four reference levels relative to the current day's open price: +100% ADR: Open + ADR +50% ADR: Open + 50% of ADR −50% ADR: Open − 50% of ADR −100% ADR: Open − ADR Coverage %: Tracks intraday high and low prices to calculate what percentage of the ADR has already been covered for the current session: Coverage % = (High − Low) ÷ ADR × 100 Interactive Table: Shows the ADR value and today's ADR coverage percentage in a customizable table overlay. The table position, colors, border, transparency, and an optional empty top row can all be adjusted via settings. Customization Options Table Settings: Position the table (top/bottom × left/right). Change background color, text color, border color and thickness. Toggle an empty top row for spacing. Line Settings: Choose color, line style (solid/dotted/dashed), and width. Lines automatically reposition each day based on that day's open price and ADR calculation. General Inputs: ADR length (number of days). Smoothing method (RMA, SMA, EMA, WMA). How to Use It for Trading Measure Daily Movement: Instantly know the expected daily price range based on historical volatility. Identify Overextension: Use the coverage % to see if the market has already moved close to or beyond its typical daily range. Plan Entries & Exits: Align trade targets and stops with ADR levels for more objective intraday planning. Visual Reference: Horizontal guide lines and table update automatically as new data comes in, helping traders stay informed without manual calculations. Ideal For Intraday traders tracking daily volatility limits. Swing traders wanting a quick reference for expected price movement per day. Anyone seeking a volatility-based framework for planning targets, stops, or identifying extended market conditions.
Pine Script®指標
由abbadon9提供
Adjustable Percentage Range Moving Average - Add'l LinesThe Adjustable Percentage Range Moving Average (APRMA), originally developed by @ReallyWendy, is a versatile PineScript indicator designed for traders and market analysts to analyze market volatility and identify trends dynamically. Building on the original concept, this updated version plots a central moving average (MA) with four customizable percentage-based range bands around it. Users can select the MA type (SMA, EMA, HMA, RMA, SWMA, TMA, WMA, VWMA), timeframe, and length, tailoring the indicator to their trading style. Each range band (upper and lower) is calculated as a percentage offset from the MA, with adjustable colors and transparency settings for enhanced visual clarity. Extension lines project the latest values forward, with customizable styles (solid, dashed, dotted). The indicator includes toggleable display options for the MA and each range pair, making it an effective tool for identifying price ranges, support/resistance levels, and trend dynamics. Credit to @ReallyWendy for the foundational concept.
Pine Script®指標
由northfieldwhale提供
Williams Alligator with Background ColoringThe Benefits of the Williams Alligator – Without the “Spaghetti” on Your Chart If you're one of those traders who prefer a clean, well-structured chart but don't want to miss out on the advantages of the Williams Alligator, this script is the perfect solution. It includes all the features of the original TradingView script plus a background color feature based on your custom parameters: Green when all candles are above the Alligator lines Red when all candles are below all lines Gray for everything in between Feel free to customize the colors and transparency to your liking. Happy Trading!
Pine Script®指標
由trdvak提供