立即開始

蔡金震盪指標(CHO)

Vorse4**Vorse4 Indicator** The Vorse4 Indicator is a technical analysis tool that combines Chaikin Oscillator, Intraday Momentum Index (IMI), MACD, and Parabolic SAR indicators. This indicator generates trading signals when all four indicators simultaneously provide buy or sell signals and visually presents these signals on the chart. **How to Use:** 1. Buy signal: A buy signal is generated when there is a positive crossover in the Chaikin Oscillator, the IMI is above 50, the MACD line crosses the signal line upwards, and the price is above the Parabolic SAR. It is marked with a green arrow below the chart. 2. Sell signal: A sell signal is generated when there is a negative crossover in the Chaikin Oscillator, the IMI is below 50, the MACD line crosses the signal line downwards, and the price is below the Parabolic SAR. It is marked with a red arrow above the chart. 3. Turning zones: Areas with a high probability of transitioning from buy to sell or sell to buy are marked in yellow. These zones are determined by monitoring turning points in the Chaikin Oscillator, MACD, and Intraday Momentum Index. **How to Apply:** 1. In your TradingView chart, go to the indicators menu and search for the "Vorse4" indicator. 2. Add the indicator to your chart. You will see green and red arrows indicating buy and sell signals, as well as yellow-colored areas representing turning zones on your chart. 3. Observe the buy and sell signals and trade according to your strategy. Analyze the performance of the indicator on historical data to evaluate the reliability of the signals. **Note:** You can adjust the indicator parameters to balance the frequency and accuracy of buy and sell signals. Each strategy has a different risk-reward balance, so you can try different values to find the one that works best for you.
Pine Script™指標
由krmdstn提供
Adaptive Fisherized CMFIntroduction Heyo, here I made a normalized Chaikin Money Flow (CMF) indicator with Inverse Fisher Transform (IFT) and some smoothing techniques. I had to normalize the indicator in order to fit it to the IFT range (-1 -> 1). Moreover, the good old adaptive mode is also included in this indicator. It uses Ehlers superb dominant cycle techniques. It also has divergence detection, several options for individualisation and doesn't repaint. Usage www.investopedia.com Signals CMF above 0 => bullish market CMF below 0 => bearish market (You can also use the inner bands instead of the zero line, to make these signals more precise) Bullish regular/hidden divergence => long Bearish regular/hidden divergence => short Enjoy guys! PS: I really would like to hear some feedback of you.
Pine Script™指標
由simwai提供
Standardized Chaikin OscillatorThis strategy is mainly designed based on Chaikin Oscillator. The problems with the Chaikin Oscillator is that it's value varies greatly depending on the symbol. Even for the same symbol, it will vary greatly depending on the volume changed. To solve the problem, this strategy keeps the values of the indicators consistent in a standardized way, so that entry and exit signals can be generated. Since this strategy refers to the trading volume, it is more suitable for exchanges with large trading volume. The default parameters are recommended to use BTCUSDT on Binance in 1hour timeframe, but you also can try the suitable parameters on your own symbol and timeframe. Enjoy it!
Pine Script™策略
由QooCCL提供
1
+ Breadth & Volumenote* If you've used my "+ Rate of Change Indicator", I am updating that without the OBV, which has been moved here. Just an FYI. This "indicator" is basically a variety of indicators that measure volume, or accumulation/distribution. There's a bit of a story about how this came about but it's not that interesting, so I'll spare you. Indicators from which you may choose here are On Balance Volume (OBV), Money Flow Index (MFI), Chaikin Money Flow (CMF), Chaikin Oscillator, and Positive & Negative Net Volume. I'll give a brief overview of these below, and if you want to educate yourself further on them you may. There are many web resources for that. Most people are probably familiar with OBV. It's one of the more commonly used volume indicators, especially in the crypto crowd (at least amongst those traders I follow). It's basically a cumulative (doesn't oscillate around a midpoint) momentum indicator that measures volume of the current period versus volume of the previous period and adds it if price closed higher, but subtracts it if price closes lower. It's another way of using volume to confirm trend. The MFI is a momentum indicator that measures the flow of money into and out of an asset over some period of time (user input). It's calculated using the RSI, so it can be used similarly to RSI (divergences, overbought, oversold, etc.), but of course unlike the RSI it's calculated primarily using volume and comparing the most recent candle close to the previous one (similar to OBV). CMF is a volume-weighted average of accumulation and distribution over a some period of time (typically 21). It's a way of measuring accumulation versus distribution in an asset, and oscillates around a zero line. You would use it similarly to any other oscillator, in that you can look for divergences, and general positive or negative momentum. Chaikin Oscillator is basically a MACD (without signal line) of the accumulation and distribution index (or line--which is somehow different than simply accumulation and distribution). I haven't looked into these differences deeply, but if you look below at the calculations, and substituted 'ad' for 'accdist' you get very different readings. I actually did that, and what it looks like it would do is turn the actual Oscillator into a MACD signal line. So, by substituting 'ad' for 'accdist' (or the accumulation/distribution index) you produce a signal line of the Chaikin Oscillator. Anyway, all that confusion out of the way, as I said, it's a MACD on the accumulation and distribution index, therefore it is another zero line oscillator, and similarly to CMF, it's a way of measuring price movements in the chart versus a/d. The zero line isn't just any old zero line, however, it is actually the accumulation distribution line. I've made an OBV version of this by substituting the OBV for AD, so if you prefer OBV maybe you will like that. Pos. & Neg Net Volume is actually an indicator I had seen made by RafaelZioni. It basically takes net volume, calculates a cumulative of that, then subtracts a moving average of some period from the cumulative net volume in order to create a volume oscillator. Use it like the other oscillators! Added Donchian Channels, moving averages, Bollinger Bands, colored everything, and alerts. Enjoy! Below I will post images with the different indicators, everything on default settings (except for lookback period, which I have adjusted to my personal preferences). Above is an image with the MFI being compared to the RSI since they are very similar (MFI being basically a volume derivative of the RSI). Chaikin Money Flow set to lookback of 13. You could probably extend that a bit if you wanted to smooth the line more. Chaikin Oscillator and Chaikin Oscillator of OBV, with a zoomed in look below, to see the differences more clearly. CO and COBV closer look. Positive & Negative Net Volume.
Pine Script™指標
由ClassicScott提供
11
Chaikin Volume Accumulation Oscillator (VAO)The Volume Accumulation Oscillator is a volume momentum indicator developed by Mark Chaikin (177E, 77th Street, New York, NY 10021). Their simplest form is a sliding sum of daily volumes divided by the difference between the daily closing price and the midpoint of the daily price range. It is a sensitive short term oscillator, the values ​​of which are obtained by subtracting the value of the previous day of its own ESS from the cumulative sum of the cumulative volume length of 2 days (for the purpose of normalization, the result is then divided by the value 2-day ESS for the previous day) Analysis of historical data shows that volume accumulation indicator can be an effective tool, especially on Long positions.
Pine Script™指標
由GrannyCola提供
1
Modified Chaikin OscillatorThis is a modified version of the Chaikin Oscillator. The idea is to find accumulation and distribution phases in the market to identify when institutions are building their positions. It uses acc/dist but as an oscillator, just like the Chaikin Oscillator, but not to find overbought or oversold areas, but to find trends. It functions like a MACD. It takes a fast moving average of the acc/dist and a slow moving average of the acc/dist, and plots the differense to create the oscillator, and uses a signal line to use for entries. A strong signal is when the oscillator crosses the signal line while the signal line is on he right side of 0. So a crossover (long) when the signal line is below 0 woul be a weak signal, while a crossover (long) when the signal line is above 0 would be a strong signal. By default, tick volume is discarded in the calculation, which makes this version behave a bit differently than the standard Chaikin Oscillator. This is because the indicator is mostly used to trade CFD's. If used to trade stocks for example, it is better to include the volume by unchecking that checkbox in the indicator settings. BRIGHT GREEN = Strong signal LONG (signal line is above 0) DARK GREEN = Weak signal LONG (signal line is below 0) BRIGHT RED = Strong signal SHORT (signal line is below 0) DARK RED = Weak signal SHORT (signal line is above 0)
Pine Script™指標
由lejmer提供