立即開始

圖表形態

Buy on Blue, Sell on Red (EMA + optional RSI) TyusEThis indicator is a trend-following system that helps traders identify potential buy and sell opportunities using a combination of EMA crossovers and an optional RSI filter for confirmation. It plots: 🔵 Blue dots (BUY signals) when the fast EMA crosses above the slow EMA — signaling bullish momentum. 🔴 Red dots (SELL signals) when the fast EMA crosses below the slow EMA — signaling bearish momentum. You can optionally filter these signals using the RSI (Relative Strength Index) to avoid false breakouts — for example, only taking BUY signals when RSI is above 55 (showing strength) and SELL signals when RSI is below 45 (showing weakness). ⚙️ Features Adjustable Fast EMA and Slow EMA lengths Optional RSI confirmation filter Customizable RSI thresholds for entries “Confirm on bar close” setting to reduce repainting Built-in alert conditions for real-time notifications 💡 How to Use Use blue dots as potential long entries and red dots as potential short entries. Confirm direction with overall trend, structure, or higher timeframe alignment. Combine with support/resistance, volume, or price action for best results. ⚠️ Note This is a technical tool, not financial advice. Always backtest and use proper risk management before trading live markets. T.E
Pine Script®指標
由Tyusearly1995提供
OpenVWAP Stop-Hunt Short – v6 (failsafe) ZorzOpenVWAP Stop-Hunt Short (Micro/Nano Caps) Intraday short framework for low-float gappers (NASDAQ/NYSE), optimized for 1m (optional 15s). The script anchors VWAP to Premarket and Regular sessions, tracks PM High (PM HOD) and Open VWAP, and flags liquidity grabs. Signal logic SHORT when a stop-hunt above PM HOD or an Open VWAP fakeout occurs and the bar closes below Open VWAP (optional confirmation: crossunder VWMA*0.985 “long50”). CLOSE when price reclaims Open VWAP or crosses above long50. Inputs Min wick%, volume spike vs SMA20, range vs ATR(1) No-trade bars after the open (filters first noisy minutes) Toggle ACW confirmation (VWMA*0.985) Notes Turn Extended Hours ON; session times are ET. Best on micro/nano-cap gappers with high PM volume; supports alerts (“Open Short”, “Close Short”). For research/education only; not financial advice.
Pine Script®指標
由StevenCharles7提供
Aibuyzone Elliott Wave SuiteOverview This study approximates Elliott-style wave structure using swing pivots. It labels primary waves (1–5), tracks subwaves (1–5) inside them, and plots future projection bands derived from the size of a recent primary leg. A small floating dashboard summarizes the current wave number, bias (bullish/bearish) based on the last leg, and a projection price range. Note: This tool is educational. Wave detection is algorithmic and approximate; it does not identify textbook Elliott patterns or validate rule sets. Manage risk independently. What it draws Primary wave labels (1–5): Based on higher swing length pivots (major turns). Subwave labels (1–5): Based on shorter swing length pivots (minor turns). Zigzag connectors: Simple lines between the latest primary pivots for structure visualization. Projection bands: Three dotted horizontal levels forward from the last primary pivot, using user-defined extension multipliers. Floating dashboard: Current Wave: Latest primary wave count (1–5). Bias: “Bullish Leg” (last pivot was a low) or “Bearish Leg” (last pivot was a high), or “Unknown” if insufficient data. Proj Range: Min–max of the three projection levels. Key Inputs Swing Structure Primary Swing Length: Pivot left/right bars for major swings. Larger values = fewer, cleaner waves. Subwave Swing Length: Pivot left/right bars for minor swings. Smaller values = more frequent subwave labels. Max Saved Swing Points: Memory limit to prevent clutter. Future Projections Show Projection Levels: Toggle projection lines on/off. Use Last Nth Leg For Size: Which recent primary leg to use for measuring projection distance (1 = most recent). Extension 1 / 2 / 3: Multipliers applied to the measured leg (e.g., 1.0, 1.618, 2.0). Style Colors and text sizes for primary and subwave labels, and projection lines. Dashboard Show Dashboard: Toggle table on/off. Dashboard Position: Top-Left / Top-Right / Bottom-Left / Bottom-Right. How projections are computed The script measures the price distance of a recent primary leg (from pivot A to pivot B). If the last pivot is a low, projections extend upward; if the last pivot is a high, projections extend downward. The three extension inputs (e.g., 1.0 / 1.618 / 2.0) are applied to that leg distance to create dotted forward levels. The dashboard’s Proj Range displays the min–max of those three levels. Using the study (suggested workflow) Choose timeframe appropriate for your style (e.g., higher timeframes for cleaner structure; lower timeframes for detail). Tune swing lengths: Increase Primary Swing Length on noisy charts to stabilize wave counts. Adjust Subwave Swing Length to reveal or simplify internal moves. Read the dashboard: Current Wave shows where the latest primary count sits (1–5). Bias summarizes the direction of the last measured leg only; it is not a trend system. Proj Range offers a coarse price band derived from your extensions. Context check: Combine wave labeling with your own market context (trend, structure, volatility) before making decisions. Risk management: Use your own stop/target methods. The projection lines are not signals. Practical tips Clutter control: If labels overlap on volatile symbols, try larger swing lengths or reduce label text sizes in Style. Scaling: On very small tick sizes, increasing the internal label price offset can improve label readability. Projection sensitivity: Changing Use Last Nth Leg can materially alter levels; confirm they match your intent. Non-determinism across timeframes: Different timeframes and symbols will produce different pivot sequences and counts. Limitations & important notes Approximation: This does not enforce all Elliott rules (e.g., alternation, wave 4 overlap constraints, channeling). It only labels swings numerically. Repainting of labels: Pivot-based waves confirm after enough bars have printed to the right of a high/low. Labels are placed when pivots confirm; they don’t predict pivots. Not a signal generator: No entries/exits/alerts are included; add your own trade plan and risk controls. Data sufficiency: Early bars or sparse data may show “Unknown” bias or “N/A” projections until adequate pivots exist. Clean-chart publishing guidance (to stay compliant) Use a chart that clearly shows this script’s outputs without unrelated indicators. Keep the description educational. Avoid performance claims, guarantees, or language implying certainty. Do not include links, promotions, prices, giveaways, contact details, or solicitations. Disclose that labels and projections are algorithmic approximations and for educational use. Risk disclosure This script is for educational purposes only. It does not provide financial, investment, or trading advice and does not guarantee outcomes. Markets involve risk, including the potential loss of capital. Always do your own research and use independent judgment.
Pine Script®指標
由aibuyzone提供
Aibuyzone Spot & Swing ZonesAibuyzone Spot & Swing Zones is a technical tool that helps identify potential buy zones during established bullish trends. It is designed for spot and swing traders who prefer to buy pullbacks within broader uptrends. This indicator does not place trades or make predictions — it only highlights contextual market areas for study. How It Works Trend Alignment Filter A higher-timeframe EMA and two local EMAs determine trend direction. Only when both the local and higher-timeframe trends agree as bullish will a potential buy zone be considered valid. Dynamic Buy Zone (Value Area) The indicator measures a rolling price range over a user-selected number of bars (e.g., last 50). The lower fraction of this range (configurable percentage) becomes the buy zone band. When price revisits this lower section during a bullish trend, it is interpreted as a potential value or discount area. Liquidity Sweep Filter (Optional) Detects bars that make a new low relative to recent candles and then close back up with a strong lower wick. This condition can indicate a possible liquidity grab or stop-hunt event that precedes reversals. RSI Pullback Filter (Optional) Confirms that price momentum has cooled during the pullback phase. Signals occur when RSI falls within a defined “pullback” zone (default 30–55), helping avoid chasing overextended moves. Confluence Scoring Each of the three criteria — buy zone presence, liquidity sweep, RSI pullback — adds one point to a confluence score. A signal only appears when the score meets or exceeds the chosen threshold (for example, 2 of 3). Visual Elements Fast and Slow EMAs for short-term trend visualization. A shaded area marking the dynamic buy zone. Optional background tint when the overall trend is bullish. Optional labels below bars when confluence criteria are met. Alert condition available for custom user alerts. Suggested Use Select a higher timeframe that fits your trading horizon (e.g., 4h for swing, 1d for position trading). Use the shaded band as a visual guide for where price may offer “discounts” within an uptrend. Combine with support/resistance, volume, or other confluence methods for confirmation. Adjust the confluence requirement for stricter or looser signals. Disclaimer This script is provided for educational and analytical purposes only. It does not constitute financial advice or a recommendation to buy or sell any asset. All trading involves risk — always perform your own analysis and manage risk according to your own judgment.
Pine Script®指標
由aibuyzone提供
MTF Supertrend + MA [TCMaster]Overview: The MTF Supertrend + MA indicator combines two powerful multi-timeframe tools — the Supertrend and Moving Averages (MA) — into one unified and customizable framework. It allows traders to analyze market trends and dynamic support/resistance levels from multiple higher timeframes directly on a single chart. ⚙️ Features 🟩 Supertrend Section Up to 4 configurable Supertrends, each from a different timeframe. Adjustable ATR Length and Multiplier (Factor). Independent visibility, colors, and timeframes for each layer. Built-in alert conditions for trend reversals (Uptrend ↔ Downtrend). Clean visual overlay on price chart. 🟦 Moving Average (MA) Section Up to 4 multi-timeframe MAs displayed simultaneously. Supports multiple MA types: SMA, EMA, WMA, RMA, HMA, VWMA, DEMA, TEMA. Independent control for each MA: color, line width, and timeframe. Dynamic Info Label displaying distance between price and each MA in real-time. Smooth, accurate MTF synchronization (no repainting from lookahead). 💡 How to Use Identify higher-timeframe trend direction using Supertrend signals. Use MAs as dynamic support/resistance or mean reversion zones. Combine both for multi-timeframe confluence trading: e.g., look for long entries when lower TF Supertrend turns bullish and price is above higher TF MAs. Set alerts to get notified when any Supertrend flips its direction. 🧩 Customization All parameters are grouped into two sections for clarity: Supertrend Settings MA Settings Fully compatible with all chart types and timeframes. ⚠️ Notes This indicator is designed for visual multi-timeframe analysis, not for automation. Alerts only trigger when the corresponding timeframe bar closes. Ensure replay mode or real-time conditions to verify alert behavior.
Pine Script®指標
由TCMaster提供
Session Dominator — Asia • London • New York Precision ZonesRule the global market sessions. Session Dominator is a precision-engineered indicator built for traders who want total clarity across Asia, London, and New York sessions. It automatically plots: 🔷 Dynamic Session Boxes — visually map institutional killzones in real time ⚙️ Session Mean Line — track equilibrium and liquidity shifts 📊 EMA-50 Confluence — align directional bias and intraday trend 🎯 BSL / SSL Levels — reveal active liquidity sweeps and reversals 💡 Bias Engine — evaluates structure and locks the session bias automatically Toggle between Asia / London / New York / Overlap / Custom modes to dominate any timezone. Designed with minimalist visuals, high precision, and ICT-based logic — this tool helps you anticipate where liquidity will be taken before it happens. ✳️ For XAUUSD traders, scalpers, and ICT-style analysts seeking sniper-level clarity.
Pine Script®指標
由daisukeburn提供
1
Short-Timeframe Volume Spike DetectorShort-Timeframe Volume Spike Detector Description: The Short-Timeframe Volume Spike Detector is an advanced multi-timeframe (MTF) indicator that automatically detects sudden volume surges and price expansion events on a lower timeframe and displays them on a higher (base) timeframe chart — helping traders identify hidden intraday accumulation or breakout pressure within broader candles. ⚙️ How It Works Select a Base Timeframe (e.g., Daily, 4H, 1H). The script automatically fetches data from a Lower Timeframe (e.g., Daily → 1H, 1H → 15m). Within each base bar, it scans all the lower timeframe candles to find: Volume Spikes: Volume exceeds average × multiplier or a custom threshold. Price Strength: Candle shows upward movement beyond a minimum % change. When both conditions are met, a spike signal is plotted on the higher timeframe chart. 🔍 Features ✅ Automatic Lower Timeframe Mapping — Dynamically selects the most relevant lower timeframe. ✅ Two Detection Modes: Multiplier Mode: Volume spikes defined as multiple of average lower timeframe volume. Manual Mode: Custom absolute volume threshold. ✅ Trend Filter Option: Show only signals during uptrends (configurable). ✅ Visual Markers: Purple “X” = Volume Spike Detected Dotted red & green lines = Candle range extension ✅ Custom Label Placement: Above High / Below Low / At Spike Price ✅ Debug Mode: Displays full diagnostic info including detected volume, threshold, and % change. 📊 Use Cases Detect early accumulation in daily candles using hourly or 15-min data. Identify institutional buying interest before visible breakouts. Confirm strong continuation patterns after price compression. Spot hidden intraday activity on swing or positional charts. 🧩 Inputs Overview Input Description Base Timeframe Main chart timeframe for analysis Lookback Bars Number of recent candles to scan Volume Mode “Multiplier” or “Manual Benchmark” Volume Multiplier Multiplier applied to average lower timeframe volume Manual Volume Threshold Fixed volume benchmark Min Price Change % Minimum lower timeframe candle % move to qualify Use Trend Filter Only show in uptrend (close > close ) Extend Bars Number of bars to extend dotted lines Label Position Choose Above High / Below Low / At Spike Price Debug Mode Show live internal values for calibration 🧠 Tips Ideal for swing traders and multi-timeframe analysts. Works best when base = Daily and lower = Hourly or 15m. Combine with Volume Profile, VWAP, or RRG-style analysis for stronger confluence. Use Multiplier 1.5–2.5 to fine-tune for your asset’s volatility. ⚠️ Notes Works only when applied to the base timeframe selected in inputs. May not display signals on non-standard intraday timeframes (like 3H). Labels limited to max_labels_count for performance stability.
Pine Script®指標
由nithinshenoy7提供
3
MTF Support & Resistance (Optimized)🧠 Smart Multi-Timeframe Support & Resistance (4H / 1H) This advanced indicator automatically detects, clusters, and visualizes high-probability support and resistance levels across multiple timeframes — giving traders a clean and intelligent market map that adapts to price action in real time. 🔍 How It Works The script scans historical 4-hour and 1-hour charts to identify swing highs and lows using pivot logic. It then applies ATR-based clustering to merge nearby levels, filters weak or irrelevant zones, and highlights the most significant price reaction areas based on the number of touches and proximity to the current price. Each level’s thickness and transparency are dynamically adjusted by strength: Thicker lines = more confirmations (stronger level) Fainter lines = weaker, less-tested level ⚙️ Main Features ✅ Multi-Timeframe Analysis (4H + 1H) ✅ Automatic pivot detection and level clustering ✅ Smart filtering based on ATR, proximity, and touch count ✅ Dynamic line width and opacity that scale with level strength ✅ Minimal clutter — only the most relevant nearby levels are displayed ✅ Color-coded visualization for quick interpretation 🔴 Red = 4H Resistance 🟢 Lime = 4H Support 🟠 Orange = 1H Resistance 🟦 Aqua = 1H Support 🎯 Ideal For Scalpers, swing traders, and intraday analysts who want: A clear visual map of major reaction zones Automatic detection of high-confluence levels A smart, adaptive system that works across assets and timeframes 📈 Usage Tips Combine with volume, order-flow, or market-structure tools for confluence. Use higher-strength levels (thicker lines) as bias zones for entries and exits. Enable or disable 4H/1H visibility to match your trading style. Built with precision and performance in mind — this Smart S&R system transforms raw swing data into a readable, multi-layered price map for confident trading decisions.
Pine Script®指標
由Prospecttrades提供
KRX RS OverlayKRX RS Overlay (Manual, Pine v6) (한국어 설명 아래에) What it does Plots a Relative Strength (RS) line of the current symbol versus a selected Korean market index on the price chart (overlay). RS is computed as Close(symbol) / Close(benchmark) and rebased to 100 N bars ago for easy comparison. An SMA of RS is included for signal smoothing. Benchmarks (manual selection only) • KOSPI (KRX:KOSPI) — default • KOSDAQ (KRX:KOSDAQ) • KOSPI200 (KRX:KOSPI200) • KOSDAQ150 (KRX:KOSDAQ150) Inputs • Benchmark: choose one of the four indices above (default: KOSPI) • Rebase N bars ago to 100: sets the normalization point (e.g., 252 ≈ 1 trading year on daily) • RS SMA length: smoothing period for the RS line • Show 100 base line: toggle the reference line at 100 How to read • RS rising → the symbol is outperforming the selected index. • RS above RS-SMA and sloping up → strengthening leadership vs. the benchmark. • RS crossing above RS-SMA → momentum-style confirmation (an alert is provided). Tips • Works on any timeframe; the benchmark is requested on the same timeframe. • If the RS line scale conflicts with price, place the indicator on the Left scale (Chart Settings → Scales) or set the series to use the left axis. Notes • This script is manual only (no auto index detection). • Educational use; not financial advice. ⸻ KRX RS 오버레이 (수동, Pine v6) 기능 현재 종목을 선택한 한국 지수와 비교한 상대강도(RS) 라인을 가격 차트 위(오버레이)에 표시합니다. RS는 종목 종가 / 지수 종가로 계산하며, 비교를 쉽게 하기 위해 N봉 전 = 100으로 리베이스합니다. 신호 완화를 위해 RS의 SMA도 함께 제공합니다. 벤치마크(수동 선택만 지원) • KOSPI (KRX:KOSPI) — 기본값 • KOSDAQ (KRX:KOSDAQ) • KOSPI200 (KRX:KOSPI200) • KOSDAQ150 (KRX:KOSDAQ150) 입력값 • Benchmark: 위 4개 지수 중 선택(기본: KOSPI) • Rebase N bars ago to 100: 리베이스 기준(일봉 252 ≈ 1년) • RS SMA length: RS 스무딩 기간 • Show 100 base line: 100 기준선 표시 여부 해석 가이드 • RS 상승 → 선택 지수 대비 초과성과. • RS가 RS-SMA 위 & 우상향 → 벤치마크 대비 리더십 강화. • RS가 RS-SMA 상향 돌파 → 모멘텀 확인(알림 제공). 팁 • 모든 타임프레임에서 동작하며, 지수도 동일 타임프레임으로 요청됩니다. • 가격 축과 스케일이 겹치면 왼쪽 스케일로 표시하도록 설정하세요(차트 설정 → Scales). 유의사항 • 자동 지수 판별 기능은 포함하지 않았습니다(수동 전용).
Pine Script®指標
由acehwang14提供
Pinbar MTF - No Repaint# Pinbar MTF - No Repaint Indicator ## Complete Technical Documentation --- ## 📊 Overview **Pinbar MTF (Multi-Timeframe) - No Repaint** is a professional-grade TradingView Pine Script indicator designed to detect high-probability pinbar reversal patterns with advanced filtering systems. The indicator is specifically engineered to be **100% non-repainting**, making it reliable for both live trading and backtesting. ### Key Features ✅ **Non-Repainting** - Signals only appear AFTER bar closes, never disappear ✅ **Three-Layer Filter System** - ATR, SWING, and RSI filters ✅ **Automatic SL/TP Calculation** - Based on risk:reward ratios ✅ **Real-time Alerts** - TradingView notifications for all signals ✅ **Visual Trade Management** - Lines, labels, and areas for entries, stops, and targets ✅ **Backtesting Ready** - Reliable historical data for strategy testing --- ## 🎯 What is a Pinbar? A **Pinbar (Pin Bar/Pinocchio Bar)** is a single candlestick pattern that indicates a potential price reversal: ### Bullish Pinbar (BUY Signal) - **Long lower wick** (rejection of lower prices) - **Small body at the top** of the candle - Shows buyers rejected sellers' attempt to push price down - Forms at support levels or swing lows - Entry signal for LONG positions ### Bearish Pinbar (SELL Signal) - **Long upper wick** (rejection of higher prices) - **Small body at the bottom** of the candle - Shows sellers rejected buyers' attempt to push price up - Forms at resistance levels or swing highs - Entry signal for SHORT positions --- ## 🔧 How the Indicator Works ### 1. **Pinbar Detection Logic** The indicator analyzes the **previous closed bar ** to identify pinbar patterns: ``` Bullish Pinbar Requirements: - Lower wick > 72% of total candle range (adjustable) - Upper wick < 28% of total candle range - Close > Open (bullish candle body) Bearish Pinbar Requirements: - Upper wick > 72% of total candle range (adjustable) - Lower wick < 28% of total candle range - Close < Open (bearish candle body) ``` **Why check ?** By analyzing the previous completed bar, we ensure the pattern is fully formed and won't change, preventing repainting. --- ### 2. **Three-Layer Filter System** #### 🔍 **Filter #1: ATR (Average True Range) Filter** - **Purpose**: Ensures the pinbar has significant size - **Function**: Only signals if pinbar range ≥ ATR value - **Benefit**: Filters out small, insignificant pinbars - **Settings**: - Enable/Disable toggle - ATR Period (default: 7) **Example**: If ATR = 50 pips, only pinbars with 50+ pip range will signal. --- #### 🔍 **Filter #2: SWING Filter** (Always Active) - **Purpose**: Confirms pinbar forms at swing highs/lows - **Function**: Validates the pinbar is an absolute high/low - **Benefit**: Identifies true reversal points - **Settings**: - Swing Candles (default: 3) **How it works**: - For bullish pinbar: Checks if low is lowest of past 3 bars - For bearish pinbar: Checks if high is highest of past 3 bars **Example**: With 3 swing candles, a bullish pinbar must have the lowest low among the last 3 bars. --- #### 🔍 **Filter #3: RSI (Relative Strength Index) Filter** - **Purpose**: Confirms momentum conditions - **Function**: Prevents signals in extreme momentum zones - **Benefit**: Avoids counter-trend trades - **Settings**: - Enable/Disable toggle - RSI Period (default: 7) - RSI Source (Close, Open, High, Low, HL2, HLC3, OHLC4) - Overbought Level (default: 70) - Oversold Level (default: 30) **Logic**: - Bullish Pinbar: Only signals if RSI < 70 (not overbought) - Bearish Pinbar: Only signals if RSI > 30 (not oversold) --- ### 3. **Stop Loss Calculation** Two methods available: #### Method A: ATR-Based Stop Loss (Recommended) ``` Bullish Pinbar: SL = Pinbar Low - (1 × ATR) Bearish Pinbar: SL = Pinbar High + (1 × ATR) ``` **Benefit**: Dynamic stops that adapt to market volatility #### Method B: Fixed Pips Stop Loss ``` Bullish Pinbar: SL = Pinbar Low - (Fixed Pips) Bearish Pinbar: SL = Pinbar High + (Fixed Pips) ``` **Settings**: - Calculate Stop with ATR (toggle) - Stop Pips without ATR (default: 5) --- ### 4. **Take Profit Calculation** Take Profit is calculated based on Risk:Reward ratio: ``` Bullish Trade: TP = Entry + (Entry - SL) × Risk:Reward Ratio Bearish Trade: TP = Entry - (SL - Entry) × Risk:Reward Ratio ``` **Example**: - Entry: 1.2000 - SL: 1.1950 (50 pip risk) - RR: 2:1 - TP: 1.2100 (100 pip reward = 50 × 2) **Settings**: - Risk:Reward Ratio (default: 1.0, range: 0.1 to 10.0) --- ## 📈 Visual Elements ### On-Chart Displays 1. **Signal Markers** - 🟢 **Green Triangle Up** = Bullish Pinbar (BUY) - 🔴 **Red Triangle Down** = Bearish Pinbar (SELL) - Placed directly on the pinbar candle 2. **Entry Labels** - Green "BUY" label with entry price - Red "SELL" label with entry price - Shows exact entry level 3. **Stop Loss Lines** - 🔴 Red horizontal line - "SL" label - Extends 20 bars forward 4. **Take Profit Lines** - 🟢 Green horizontal line - "TP" label - Extends 20 bars forward 5. **Risk/Reward Areas** (Optional) - Red shaded box = Risk zone (Entry to SL) - Green shaded box = Reward zone (Entry to TP) - Visual risk:reward visualization 6. **Info Table** (Top Right) - Displays current settings - Shows filter status (ON/OFF) - Real-time RSI value - Quick reference panel --- ## 🔔 Alert System Three alert types available: ### 1. Combined Alert: "Pinbar Signal (Any Direction)" - Fires for BOTH bullish and bearish pinbars - **Best for**: General monitoring - **Message**: "Pinbar Signal Detected on {TICKER} at {PRICE}" ### 2. Bullish Alert: "Bullish Pinbar Alert" - Fires ONLY for BUY signals - **Best for**: Long-only strategies - **Message**: "BUY Signal on {TICKER} at {PRICE}" ### 3. Bearish Alert: "Bearish Pinbar Alert" - Fires ONLY for SELL signals - **Best for**: Short-only strategies - **Message**: "SELL Signal on {TICKER} at {PRICE}" --- ## ⚙️ Input Parameters Reference ### **Filters Group** | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | ATR Filter on Pinbar Range? | ✅ ON | Boolean | Enable/disable ATR filter | | ATR Period | 7 | 1+ | Lookback period for ATR calculation | | Swing Candles | 3 | 1+ | Bars to check for swing high/low | | RSI Filter on Pinbar? | ❌ OFF | Boolean | Enable/disable RSI filter | | RSI Period | 7 | 2+ | Lookback period for RSI calculation | | RSI Source | Close | Multiple | Price data for RSI (Close/Open/High/Low/etc) | | RSI Overbought Level | 70 | 50-100 | Upper threshold for RSI filter | | RSI Oversold Level | 30 | 0-50 | Lower threshold for RSI filter | ### **Pinbar Detection Group** | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | Shadow % vs Body | 72 | 50-95 | Minimum wick size as % of total range | ### **Visualization Group** | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | Show SL and TP Lines? | ✅ ON | Boolean | Display stop loss and take profit lines | | Show SL and TP Area? | ❌ OFF | Boolean | Show shaded risk/reward boxes | ### **Risk Management Group** | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | Risk:Reward Ratio | 1.0 | 0.1-10.0 | Target profit vs risk (1.0 = 1:1, 2.0 = 1:2) | | Calculate Stop with ATR? | ✅ ON | Boolean | Use ATR for stop calculation | | Stop Pips without ATR | 5 | 1+ | Fixed pip stop when ATR disabled | --- ## 🚫 Non-Repainting Architecture ### What is Repainting? **Repainting** occurs when an indicator's historical signals differ from what appeared in real-time. This makes backtesting unreliable and can lead to false confidence in a strategy. ### How This Indicator Prevents Repainting 1. **Closed Bar Analysis** - All calculations use ` ` offset (previous bar) - Only analyzes COMPLETED candles - Signals appear on the bar AFTER the pinbar closes 2. **Confirmed Swing Points** - Waits for sufficient bar history before signaling - Only checks historical bars that cannot change - Prevents premature swing detection 3. **Static Alert Timing** - Alerts fire only after bar completion - No conditional logic that changes historically - Same results in replay mode and live trading ### Verification Method To verify non-repainting behavior: 1. Apply indicator to chart 2. Note signal locations and prices 3. Refresh browser / reload chart 4. **Signals remain in exact same locations** --- ## 💼 Trading Strategy Guidelines ### Entry Rules **For Bullish Pinbar (LONG):** 1. Wait for green triangle to appear 2. Enter at close of pinbar (shown in label) 3. Alternative: Enter on break of pinbar high 4. Place stop loss at red SL line 5. Set target at green TP line **For Bearish Pinbar (SHORT):** 1. Wait for red triangle to appear 2. Enter at close of pinbar (shown in label) 3. Alternative: Enter on break of pinbar low 4. Place stop loss at red SL line 5. Set target at green TP line ### Risk Management - **Position Sizing**: Risk only 1-2% of account per trade - **Stop Loss**: Always use the calculated SL (never move it wider) - **Take Profit**: Use calculated TP or trail stop after 1:1 RR - **Multiple Timeframes**: Confirm signals on higher timeframe ### Best Practices ✅ **DO:** - Wait for bar to close before entering - Trade in direction of higher timeframe trend - Use on liquid markets with clear support/resistance - Combine with price action analysis - Keep a trading journal ❌ **DON'T:** - Enter before bar closes (prevents seeing full pattern) - Trade against strong trends - Ignore the filters (they improve win rate) - Risk more than 2% per trade - Trade every signal (be selective) --- ## 📊 Backtesting & Data Export ### Available Data Points The indicator exports these values for strategy development: | Output | Description | |--------|-------------| | Bullish Signal | 1 = BUY signal, 0 = No signal | | Bearish Signal | 1 = SELL signal, 0 = No signal | | Bull SL | Stop loss level for long trades | | Bull TP | Take profit level for long trades | | Bull Entry | Entry price for long trades | | Bear SL | Stop loss level for short trades | | Bear TP | Take profit level for short trades | | Bear Entry | Entry price for short trades | ### How to Use in Strategy These values can be accessed by Pine Script strategies using: ```pine indicator_values = request.security(syminfo.tickerid, timeframe.period, ) ``` --- ## 🎓 Understanding the Filters ### Why Use Multiple Filters? Single-indicator systems often generate too many false signals. This indicator uses a **confluence approach**: 1. **Pinbar Pattern** = Price rejection detected 2. **+ SWING Filter** = Rejection at key level 3. **+ ATR Filter** = Significant move 4. **+ RSI Filter** = Favorable momentum **Result**: Higher probability setups with better risk:reward ### Filter Optimization **Conservative Settings** (Fewer, Higher Quality Signals): - ATR Filter: ON - Swing Candles: 5 - RSI Filter: ON - Shadow %: 75% **Aggressive Settings** (More Signals, More Noise): - ATR Filter: OFF - Swing Candles: 2 - RSI Filter: OFF - Shadow %: 65% **Balanced Settings** (Recommended): - ATR Filter: ON - Swing Candles: 3 - RSI Filter: OFF (or ON for trending markets) - Shadow %: 72% --- ## 🔍 Troubleshooting ### "No Signals Appearing" **Possible Causes:** 1. Filters are too strict 2. No pinbars forming on chart 3. Insufficient bar history **Solutions:** - Reduce Shadow % to 65% - Reduce Swing Candles to 2 - Disable ATR or RSI filters temporarily - Check that chart has enough data loaded ### "Too Many Signals" **Solutions:** - Enable ATR filter - Increase Swing Candles to 4-5 - Enable RSI filter - Increase Shadow % to 75-80% ### "Signals Appearing Late" **This is normal behavior!** The indicator: - Analyzes previous closed bar - Signals appear on the bar AFTER the pinbar - This is what prevents repainting - Signal latency is 1 bar (by design) --- ## 📝 Technical Specifications **Indicator Type:** Overlay (displays on price chart) **Pine Script Version:** 5 **Max Labels:** 500 **Max Lines:** 500 **Repainting:** None (100% non-repainting) **Data Window Values:** 8 exported values **Alert Types:** 3 (Combined, Bullish, Bearish) **Performance:** - Lightweight script (fast execution) - Works on all timeframes - Compatible with all markets (Forex, Crypto, Stocks, Futures) - No data snooping bias --- ## 🎯 Use Cases ### 1. **Swing Trading** - Timeframe: Daily, 4H - Filter Settings: All enabled - Best for: Catching major reversals ### 2. **Day Trading** - Timeframe: 15m, 1H - Filter Settings: ATR + SWING only - Best for: Intraday reversals ### 3. **Scalping** - Timeframe: 5m, 15m - Filter Settings: SWING only (aggressive) - Best for: Quick reversals (requires experience) ### 4. **Position Trading** - Timeframe: Weekly, Daily - Filter Settings: All enabled + high RR (2:1 or 3:1) - Best for: Long-term trend reversal catches --- ## 🏆 Advantages Over Other Pinbar Indicators ✅ **Guaranteed Non-Repainting** - Many pinbar indicators repaint; this one never does ✅ **Automatic SL/TP** - No manual calculation needed ✅ **Multi-Layer Filtering** - Reduces false signals significantly ✅ **Visual Trade Management** - Clear entry, stop, and target levels ✅ **Flexible Configuration** - Adaptable to any trading style ✅ **Alert System** - Never miss a setup ✅ **Backtesting Ready** - Reliable historical data ✅ **Professional Grade** - Suitable for live trading --- ## 📚 Educational Resources ### Recommended Reading on Pinbars - "The Pin Bar Trading Strategy" by Nial Fuller - "Price Action Trading" by Al Brooks - TradingView Education: Price Action Patterns ### Practice Recommendations 1. Paper trade signals for 20+ trades before live trading 2. Backtest on different timeframes and markets 3. Keep detailed records of all trades 4. Analyze winning vs losing setups 5. Refine filter settings based on results --- ## ⚖️ Disclaimer This indicator is a tool for technical analysis and does not guarantee profits. Trading involves substantial risk of loss. Past performance is not indicative of future results. - Always use proper risk management - Never risk more than you can afford to lose - Consider your trading experience and objectives - Seek independent financial advice if needed --- ## 📧 Version Information **Current Version:** 1.0 **Last Updated:** 2024 **Compatibility:** TradingView Pine Script v5 **Status:** Production Ready --- ## 🔄 Future Enhancements (Potential) Possible future additions: - Multi-timeframe confirmation option - Volume filter integration - Customizable color schemes - Win rate statistics display - Partial profit taking levels - Trailing stop functionality --- ## 📖 Quick Start Guide ### 5-Minute Setup 1. **Add to Chart** - Open TradingView - Go to Pine Editor - Paste the code - Click "Add to Chart" 2. **Configure Settings** - Open indicator settings (gear icon) - Start with default settings - Enable "Show SL and TP Lines" 3. **Set Alert** - Right-click indicator name - Click "Add Alert" - Select "Pinbar Signal (Any Direction)" - Configure notification method 4. **Test** - Scroll back on chart - Verify signals make sense - Check that signals don't repaint 5. **Trade** (After Practice!) - Wait for alert - Verify signal quality - Enter, place SL/TP - Manage trade --- ## 🎯 Final Thoughts The **Pinbar MTF - No Repaint** indicator is designed for serious traders who value: - **Reliability** over flashy signals - **Quality** over quantity - **Honesty** over false promises This indicator will NOT: - Make you rich overnight - Win every trade - Replace proper trading education This indicator WILL: - Identify high-probability reversal setups - Save you analysis time - Provide consistent, non-repainting signals - Help you develop a systematic trading approach **Success in trading comes from:** 1. Proper education (60%) 2. Risk management (30%) 3. Technical tools like this indicator (10%) Use this tool as part of a complete trading plan, not as a standalone solution.
Pine Script®指標
由Makshels提供
ICT Sweep + CHoCH + FVG Alerts ### 🔥 ICT Sweep + CHoCH + FVG Alerts Script designed to automate ICT entry confirmations using: • Liquidity Sweep (Buy/Sell Stops taken) • Change of Character (CHoCH) • Fair Value Gap (FVG) confirmation ### ✅ Conditions **Long signal when:** 1. Bearish liquidity sweep 2. Bullish CHoCH 3. Bullish FVG forms and gets respected **Short signal when:** 1. Bullish liquidity sweep 2. Bearish CHoCH 3. Bearish FVG forms and gets respected ### 🎯 Purpose This script helps traders detect smart-money setup entries based on ICT logic and receive alerts in real time. ### 📡 Alerts Supports webhook automation for bots, signal servers, or trading platforms. *This script does not place trades automatically, alerts only.* ### ⚠️ Disclaimer This tool is for educational purposes. Always backtest and use proper risk management.
Pine Script®指標
由salim-ali提供