LANZ Strategy 7.0🔷 LANZ Strategy 7.0 — Multi-Session Breakout Logic with Midnight-Cross Support, Dynamic SL/TP, Multi-Account Lot Sizing & Real-Time Visual Tracking
LANZ Strategy 7.0 is a robust, visually-driven trading indicator designed to capture high-probability breakouts from a customizable market session.
It includes full support for sessions that cross midnight, dynamic calculation of Entry Price (EP), Stop Loss (SL) and Take Profit (TP) levels, and a multi-account lot sizing panel for precise risk management.
The system is built to only trigger one trade per day and manages the full trade lifecycle with automated visual cleanup and detailed alerts.
📌 This is an indicator, not a strategy — it does not place trades automatically, but provides exact entry setups, SL/TP levels, risk-based lot size guidance, and real-time alerts for execution.
🧠 Core Logic & Features
🚀 Entry Signal (BUY/SELL)
The trading day begins with a Decision Session (yellow box) where the high/low range is recorded.
Once the Operative Session starts (blue zone), the first touch of the session’s high triggers a BUY setup, and the first touch of the session’s low triggers a SELL setup.
Only one valid trade can be triggered per day — the system locks after the first signal.
⚙️ Dynamic Stop Loss & Take Profit
SL levels are derived from the Decision Session high/low using customizable Fibonacci multipliers (independent for BUY and SELL).
TP is dynamically calculated from the EP–SL distance using a user-defined Risk:Reward ratio (R:R).
All EP, SL, and TP levels are drawn as independent lines with customizable colors, label text size, and style.
⏳ Session & Midnight-Cross Support
Works with any custom Decision/Operative session hours, including sessions that start one day and end the next.
Properly tracks time zones using New York session time for consistency.
Includes Cutoff Time: after this limit, no new entries are allowed, and all visuals are auto-cleared if no trade was triggered.
💰 Multi-Account Risk-Based Lot Sizing
Supports up to 5 independent accounts.
Each account can have:
Own capital
Own risk percentage per trade
Lot size is auto-calculated based on:
SL distance (in pips or points)
Pip value (auto-detected for Forex or manually set for indices/commodities)
Results are displayed in a clean lot size info panel.
🖼️ Real-Time Visual Tracking
Dynamic updates to all levels during the Decision Session.
EP, SL, TP lines update if the session high/low changes before the Operative Session starts.
Trade result labels:
SL hit → “–1.00%” in red
TP hit → “+X.XX%” in green
Manual close at Operative End → shows actual % result in blue or purple.
🔔 Alerts for Every Key Event
Session start notification
EP entry triggered
SL or TP hit
Manual close at session end
Missed entry due to cutoff
🧭 Execution Flow
Decision Session (Yellow) — Capture high/low range.
Operative Session (Blue) — First touch of high = BUY setup; first touch of low = SELL setup.
Plot EP, SL, TP lines + calculate lot sizes for all active accounts.
Track trade until SL, TP, or Operative End.
If no entry triggered by Cutoff Time → clean all visuals and notify.
💡 Ideal For:
Traders who operate breakout logic on specific sessions (NY, London, Asian, or custom).
Those managing multiple accounts with strict risk per trade.
Anyone trading assets with sessions crossing midnight.
👨💻 Credits:
Developer: LANZ
Logic Design: LANZ
Built For: Multi-timeframe session breakouts with high precision.
Purpose: One-shot trade per day, risk consistency, and total visual clarity.
圖表形態
Regime KaleidoscopeWhat is Regime Kaleidoscope?
Regime Kaleidoscope is an advanced market regime visualizer and adaptive signal generator.
It helps traders instantly understand whether current market conditions are best for mean-reversion (fading price back to the mean) or breakout/trend-following (riding strong moves), using a data-driven, non-repainting approach.
How It Works
1. Regime Detection & Background Colors
The indicator analyzes both volatility (ATR) and the shape of each candle (body size vs. range) over a rolling window.
Each bar is classified into one of three regimes, and the chart’s background color changes accordingly:
Regime Background Color What It Means How to Use
Low Vol Balanced Green background Market is calm, compressed. More likely to revert back to mean. Look for mean-reversion signals only (fade moves).
High Vol Directional Red background Market is in a high-volatility, trending, or “breakout” state.
Red does NOT mean bearish. It simply means conditions are ripe for strong directional moves—either up or down. Look for breakout signals only (ride strong moves after structure break).
Chop Gray background Market is indecisive or transitioning between states. Signals are minimized or blocked. Best to wait or trade with extra caution.
→ Red background means high volatility/trending regime, not a signal direction!
Green means “mean-revert environment,” not always bullish!
Gray means “chop/transition”—usually best avoided.
2. Signals — How to Read and Trade Them
Mean-Reversion Signals (Green Regime Only):
Appear when price is stretched away from a rolling mean (SMA) by a configurable ATR-based threshold.
Optional: Only allowed in the direction of the higher-timeframe trend, if enabled.
Long signals: Fade extreme dips (look for triangle-up shapes & green labels).
Short signals: Fade extreme spikes (triangle-down shapes & red labels).
Labels show signal strength (distance from mean in ATR units).
Breakout Signals (Red Regime Only):
Only triggered when price breaks above or below a confirmed swing high or low (pivot), with a strong candle and optional trend confirmation.
Long signals: Breakout above last swing high (regardless of background color).
Short signals: Breakout below last swing low.
Labels show signal strength (distance from pivot in ATR units).
Red background does NOT mean sell— it means “trend environment”—so both long and short signals are possible, depending on which direction price is breaking out.
Signal Controls & Filtering:
Signals only fire at bar close (non-repainting), never intrabar or on future data.
ATR “floor” blocks signals when volatility is too low for meaningful moves.
Cooldown: Signals are limited to one per regime per direction for a minimum number of bars (user input).
Optional confirmation candles: Only strong reversals or breakouts count, reducing noise and whipsaws.
All signals are visible as triangle shapes below/above bars, and labeled with strength.
3. Visual Guide
Background color: Maps the regime, not buy/sell direction.
Transition label: Appears only when the regime changes, so you can see state shifts at a glance.
Triangle shapes & labels: Mark entry points; label gives strength.
Info table (optional): Shows regime and ATR at transitions.
Why is Regime Kaleidoscope Unique?
Uses rolling statistical percentiles of ATR and candle body shape for dynamic market state detection—not just a moving average or volatility band.
Separates regime from signal direction, so you always know “what mode the market is in” and when signals actually have a higher probability.
No repainting. All logic is strictly bar-close, confirmed pivots, and non-future-leaking.
Highly customizable—all thresholds, filters, trend confirmation, and cooldown are user inputs.
How To Use
Add to any chart.
Use the background color to identify if you’re in a mean-revert, breakout, or chop regime.
Take only the signals that match the regime:
Green = fade extremes, Red = ride breakouts, Gray = wait.
Tune settings for your asset and timeframe.
All signals are educational—always test before live use!
Past performance is not necessarily indicative of future results.
Test the indicator on your assets and timeframes. All signals are for educational use only.
RSI + MACD + EMA Buy/Sell ComboRSI + MACD + EMA Buy/Sell Combo with signals if all 2 lines up it will create buy and cell signals
WERTradersThis custom indicator is designed for traders who prefer a clean chart with clear Buy and Sell signals — without any distracting moving average lines.
It uses a simple and effective Moving Average Crossover strategy in the backend:
Buy Signal: When the short-term (fast) moving average crosses above the long-term (slow) moving average.
Sell Signal: When the fast moving average crosses below the slow moving average.
✔️ Ideal for price-action traders
✔️ Clean chart with only actionable signals
✔️ Suitable for intraday and swing trading
✔️ Includes alert support for automation
BTC/USD Confluence Breakout Pro – IST EditionBTC/USD Confluence Breakout Pro – IST Edition is a multi-factor breakout trading system designed for intraday and swing traders.
It combines trend, momentum, price action, volume, and candlestick analysis with time-based volatility windows to deliver high-probability Buy/Sell signals.
Key Features:
Trend Filters: EMA 9/21 crossover + optional EMA 200 bias filter.
Price Action Breakouts: Detects closes above/below the last N bars’ range.
Candlestick Patterns: Bullish/Bearish engulfing, hammer, and shooting star.
Momentum Indicators: RSI (14) with configurable thresholds, MACD (12/26/9).
Volume Confirmation: Volume spike vs 20-period SMA.
IST Breakout Windows: Highlights Early London, London–US Overlap, and US Open momentum periods (Hyderabad/IST time). Optionally restricts signals to these windows.
Risk Management: ATR-based stop-loss + auto-plotted 1R, 2R, and 3R take-profit levels.
Visual Aids: EMA plots, bar coloring, shaded volatility windows, and clear entry/exit labels.
Alerts: Configurable alerts for both Buy and Sell signals.
Best Use:
Apply on 1m–15m charts for intraday trading or 1H–4H for swings.
Works best during high-volatility IST windows (London–US overlap & US open).
Ideal for BTC/USD but adaptable to other crypto or forex pairs.
BTC/USD Breakout Hours – IST (Hyderabad)This indicator highlights the most volatile BTC/USD trading hours based on Hyderabad (IST) time.
It marks three key breakout windows:
London–US Overlap (17:30–20:30 IST) – Highest liquidity & volatility
US Market Open Momentum (19:00–23:30 IST) – Strong trend moves
Early London Session (12:30–15:30 IST) – Pre-US setup moves
The script automatically converts chart time to IST, shades each breakout window, and includes optional alerts for:
Window start
15 minutes before start
Ideal for traders who want to align entries with high-probability market moves while avoiding low-volume hours.
Reversal Scalp TradesThis indicator is for scalp trades only. It is based on RSI and divergence. This works well when market is not volatile. You can input signal names you want in the Confirm Call/Put Text entry box.
EMA + Channel Strategy prefect buy / sell signalN45 EMA + Channel Strategy prefect buy / sell signal
TRAMA - Law of AttractionUses multiple Trend Regularity Adaptive Moving Averages to determine price points candles will eventually touch.
Double Inside Bar Scanner [Daily]Double Inside Bar Scanner . Captures Double Inside based on last 2 daily Bars
4H CRT High/Low (5AM–8:59AM CT) - With HistoryAuto draw a High an Low of 4H candle range
start from 5am to 8:59 am Central time .
chung ta su dung cong cu nay , no se tu ve ra, chung ta khong can phai di tim cho mat thoi gian.
- huong dan su dung
1. neu chart di len, thi canh reject va short xuong,
2. neu chart di xuong thi canh reject danh len
uu diem: stop loss ngan, winrate cao. se khong bi revenge trade
T1KR – PreMarket High BreakTracks and alerts when price breaks above the pre-market high (04:00–09:30 ET). This level often acts as a key trigger for momentum runs, attracting algorithmic buying, stop orders, and breakout traders. Useful for identifying strong continuation moves at or after the market open.
T1KR – VWAP Reclaim ↑ VWAP Reclaim (cross up)
Identifies when price crosses up through VWAP, signaling a potential shift in intraday control from sellers to buyers. Commonly used by momentum and institutional traders to catch breakouts, VWAP reclaims often mark the start of high-probability moves, especially on catalysts or strong volume.
Dr. Fib - FGBAB - Open Range Breakout for Indexes v2.0 *** EXCLUSIVELY FOR INDEXES ***
This Open Range Breakout Indicator (ORB) helps your discretionary trading when looking for breakouts on the 15 mins range; and you can use it on small time frames to time your entries with more precision.
This indicator helps your discretionary trading by allowing visual settings that helps discretionary trades to make faster decisions.
It will provide you will the following on-screen information:
- ORB HIGH and LOW: The Open Range Breakout set by the input parameters, for example the first 15 mins RTH Open from 9:30 to 6:45.-
- ORB MID: The ORB mid point for reference, generally the price tends to return and bounce from the 50% ORB.
Reward to Risk posible targets for LONG and SHORT trades: This will provide target value references, it is based on the ORB Risk from high to low, you have 1:1, 2:1, 3:1 and 4:1 possible targets in both directions.
Reference table:
The reference table is a visual setting for you to have at first sight important information before considering getting into the trade:
- ORB HIGH and LOW.
- Risk in points.
- Risk in USD.
- Amount of contracts considering the MaxRisk input parameter you select.
- The current LIVE R:R based on the entry, if price is abobe ORB High it will simulate a LONG position is price is below the ORB Low it will simulate a SHORT position,
- The LIVE profit simulation based on the above.
- MaxRunUP, the highest equity the trade simulation has produced.
Direction: The current trade direction simulation based on the ORB HIGH or ORB LOW.
This new version (2.0) will provide historical ORB's and Target in the chart so you can use for future references and past performance analysis.
Keep in mind this indicator is a "gauge" a visual help for discretionary traders that like to trade Open Range Breakout strategy.
It will reset the ORB at RTH Close and build a new ORB at next RTH calendar day based in the ORB time you have selected by the input parameters.
Please feel free to use in your own trading at your own discretion.
Thiru Zeussy TimeCycles IndicesThiru Zeussy TimeCycles Indices
Overview:
This indicator is designed for indices traders, highlighting key trading sessions (killzones) and granular Zeussy Time Cycles to identify high-probability price action periods. It plots session boxes, pivots, and ranges, with customizable settings for flexibility across various timeframes and markets.
Features:
- Displays six major killzone sessions with customizable colors and transparency.
- Includes eight Zeussy Time Cycles for finer intraday analysis within killzones.
- Tracks high/low pivots for each session with optional labels and alerts.
- Shows day, week, and month open/high/low lines with separators.
- Provides a range table to display current and average session ranges.
- Supports customizable time zones and drawing limits to optimize performance.
Time Cycles (All times in GMT-4, adjustable via Timezone setting):
Killzones:
// - Asia: 20:00–00:05 – Captures Asian session volatility.
// - London: 02:00–05:05 – Highlights London market open and early moves.
// - NY AM: 08:30–11:05 – Covers New York morning session, key for indices.
// - NY Lunch: 12:00–13:05 – Identifies quieter midday consolidation.
// - NY PM: 13:30–16:05 – Tracks New York afternoon volatility.
// - Power Hour: 15:00–16:05 – Focuses on high-activity period before market close.
Zeussy Time Cycles (Sub-sessions within killzones):
// - London AMD: 02:30–04:05 – Early London momentum phase.
// - London M2: 04:03–04:30 – Late London consolidation window.
// - NY A: 07:00–08:35 – Pre-NY open volatility for indices.
// - NY M: 08:30–10:05 – Early NY momentum phase.
// - NY D: 10:00–11:35 – Mid-morning NY directional moves.
// - Lunch A: 11:30–13:05 – Extended lunch consolidation period.
// - PM M: 13:00–14:35 – Early afternoon momentum.
// - PM D: 14:30–16:05 – Late afternoon directional phase.
Settings:
// - Session Drawing Limit: Controls how many sessions are drawn (default: 1 day) to manage chart clutter.
// - Timeframe Limit: Restricts drawings on timeframes ≥ 240 minutes (4 hours).
// - Timezone: Set to GMT-4 by default; adjust to match your broker’s server time.
// - Killzone Settings: Enable/disable individual killzones, customize colors, and adjust transparency (default: 95 for boxes, 75 for text).
// - Zeussy Time Cycles: Enable/disable sub-sessions, set box color, and adjust transparency (default: 95 for boxes, 75 for text).
// - Killzone Pivots: Show high/low lines, midpoints, and labels; configure alerts for pivot breaks.
// - Day-Week-Month: Display daily, weekly, or monthly open/high/low lines and separators.
// - Range Table: Shows current and average ranges for enabled sessions; position and size customizable.
Usage Notes:
// - Best suited for indices (e.g., S&P 500, NASDAQ) on intraday timeframes (1–60 minutes).
// - Adjust Timezone setting if your broker’s server time differs from GMT-4.
// - Enable only necessary killzones/Zeussy cycles to avoid chart clutter, especially on lower timeframes.
// - Test alerts for pivot breaks to ensure they align with your trading strategy.
// - For performance, limit drawings (max_days) or disable unlimited lines if lag occurs.
VWAP + MACD Estrategia MilloVWAP + MACD Strategy
This indicator combines the VWAP (Volume Weighted Average Price) with MACD (Moving Average Convergence Divergence) to create buy and sell signals. It helps traders identify potential market entry and exit points based on price action and momentum.
Conditions for Buy:
The price must be above the VWAP.
The MACD line crosses above the signal line (bullish crossover).
The MACD line is below the zero line.
Conditions for Sell:
The price must be below the VWAP.
The MACD line crosses below the signal line (bearish crossover).
The MACD line is above the zero line.
Features:
The VWAP line is plotted to represent the average price, weighted by volume, over a specified period.
Buy signals appear when all conditions are met for an upward price movement.
Sell signals appear when all conditions are met for a downward price movement.
MACD and Signal Line: The MACD helps to confirm momentum, while the signal line indicates possible trend reversals.
Customizable: You can modify the VWAP and MACD parameters to suit different trading strategies.
This strategy is designed for intraday traders and scalpers, aiming to catch quick movements while being aware of market momentum.
Feel free to share this description along with the code! Let me know if you need any adjustments or further explanations.
Multi-Signal Entry V1Multi‑Signal Entry v1 – (clean, versioned for tracking changes)
SQQQ Entry Scanner – (specific to your use case)
TQQQ/SQQQ Buy Alert – (clear that it’s for both sides if you add short logic later)
VWAP RSI ATR Vol Spike – (great if you want a technical name showing what’s used)
Fast Entry Signal Bot – (if you want a simple, trading-friendly name)
SeparatorsSession - H1 and below Time Frame
Day - H4 and below Time Frame
Month - D Time Frame
Quarter - W Time Frame
Advanced Market Predictor + News Sentiment + NY Stop-Huntgives you a brief analysis on FRD and 3 days long New York session
Market Structure Origin MoveMarket Structure Origin Move Tool
The Market Structure Origin Move Tool is a sophisticated trading tool designed to identify key market structures, including internal and external swings, Break of Structure (BOS), and Change of Character (CHOCH). This tool allows traders to gain insights into market movements and potential entry points based on institutional trading activities.
Key Features:
1. Identification of Swings:
The tool identifies internal swings (short-term price movements) and external swings (longer-term price movements) in the market. This helps traders understand the overall market structure and significant turning points.
2. Break of Structure (BOS):
BOS represents a breakout from the latest swing high or low on the chart. This occurrence indicates a significant change in market momentum and potential new trends.
The tool will mark these breakouts visually, helping traders recognize key points where price action changes direction.
3. Change of Character (CHOCH):
CHOCH occurs when a new bullish breakout follows a previous bearish breakout, indicating a shift in market dynamics. Conversely, a bearish CHOCH appears when a bearish breakout follows a prior bullish breakout.
This identification highlights a potential reversal in market trends, allowing traders to adjust their strategies accordingly.
4. Institutional Position Entry:
A significant aspect of this tool is its ability to identify where institutional traders may have entered their long or short positions before BOS or CHOCH events.
Green Boxes are used to indicate bullish BOS origin points, representing where institutional interest in buying may have started.
Red Boxes denote bearish BOS origin points, highlighting where institutional selling interests began.
This feature provides traders with valuable insights into potential support and resistance areas based on institutional trading behavior.
Conclusion:
The Market Structure Origin Move Tool equips traders with a deeper understanding of market movements by identifying critical swings, breakouts, and origins of institutional positions. By highlighting these key points, traders can make informed decisions about their entries and exits, ultimately enhancing their trading strategies.
ShadowBlocks SMC indicator💼 SMC Indicator – Trade Like Smart Money
The SMC Indicator is a precision-engineered tool built around Smart Money Concepts, revealing how institutional players truly move the markets. Forget retail noise — SMC cuts through the fog to show the real structure, liquidity zones, and key manipulation points that big money uses to trap uninformed traders.
Key Features:
🔹 Market Structure Mapping: Real-time detection of Breaks of Structure (BOS) and Change of Character (CHoCH) for trend identification.
🔹 Liquidity Zones: Highlights internal and external liquidity pools where stop hunts are most likely to occur.
🔹 Order Blocks & Imbalances: Automatic marking of bullish/bearish order blocks, Fair Value Gaps (FVGs), and mitigation zones.
🔹 Premium/Discount Zones: Smart price equilibrium tracking using internal range Fibonacci logic.
🔹 Entry & Exit Clarity: Clearly defined high-probability entry zones, TP/SL levels, and confirmation-based signals.
Whether you're a price action purist or a strategic SMC trader, this indicator brings the invisible hand of institutions into full view — so you can follow smart money, not fight it.
⚠️ Disclaimer:
ShadowBlocks SMC Indicator is an educational and informational tool. It does not provide financial advice. Always do your own research and consult a licensed financial advisor before making trading decisions.
Harmonic AIHarmonica is a high-precision trading indicator that visualizes the ebb and flow of market structure in real-time. Built for traders who decode trends through structure, Harmonica identifies Breaks of Structure (BOS) and Change of Character (CHoCH) lines, providing crystal-clear signals for Buy and Sell opportunities.
With every movement, the market sings a pattern — Harmonica captures that pattern and translates it into an actionable visual language:
Structural Levels: Instant display of BOS and CHoCH zones for spotting trend shifts.
Buy & Sell Signals: Timely alerts based on structural reversals and momentum.
Dynamic Zones: Auto-generated support, resistance, and equilibrium levels.
Flow Mapping: Track the market’s direction across timeframes with clarity and harmony
By harmonizing structure with signal clarity, Harmonica reveals the rhythm behind volatility, giving you a strategic edge in both ranging and trending conditions.
⚠️ Disclaimer:
Harmonica is an educational and informational tool. It does not provide financial advice. Always do your own research and consult a licensed financial advisor before making trading decisions.
