立即開始

Forecasting

DX Fibonacci LevelsDX Fibonacci Levels Indicator This Pine Script code implements a custom Fibonacci levels indicator that displays key Fibonacci retracement and extension levels on a price chart. The indicator helps traders identify potential support, resistance, and breakout areas by plotting significant Fibonacci levels based on the most recent high and low price range. How to Use the Indicator: Interpretation of Fibonacci Levels: The indicator plots the following Fibonacci levels: 23.6% Retracement (Gray Line): This level represents a shallow retracement and is often considered a potential minor support or resistance area. It can signal a short-term price correction. 38.2% Retracement (Blue Line): One of the most widely used retracement levels. A price reversal at this level is seen as a potential indication of a strong move in the original direction. 50.0% Retracement (Gray Line): Although not a Fibonacci ratio itself, this level is a psychological midpoint. A 50% retracement often represents a neutral point where price could either reverse or continue in the original direction. 61.8% Retracement (Yellow Line): A key level for traders, as it is considered the "golden ratio" of Fibonacci. It is a critical area for determining the continuation of the trend or a potential reversal. 78.6% Retracement (Red Line): This level is closer to the 100% retracement and indicates a deeper pullback. It can represent an area of strong support or resistance. 100.0% (Purple Line): This level is equivalent to the recent low. It represents the full retracement or the lowest price point within the selected range. 127.2% Extension (Green Line): A Fibonacci extension level, indicating a potential area where price could extend beyond the previous high. This level often marks the beginning of a new trend or significant price movement. 161.8% Extension (Green Line): Another Fibonacci extension, marking an even further price projection. Traders use this level to forecast a continuation of the price movement in the direction of the prevailing trend. Using the Indicator in Trading: Identifying Support and Resistance: When the price approaches one of the key retracement levels (such as 38.2%, 50%, or 61.8%), traders often watch for signs of a reversal, like candlestick patterns or volume spikes, as these could indicate a potential entry or exit point. Trend Continuation: If the price retraces to one of these levels and then continues in the direction of the trend, it can confirm that the trend is still intact. The extension levels (127.2% and 161.8%) help identify where the price may head next if the trend continues. Breakout Zones: The extension levels can also act as breakout points. A price that surpasses the 100% level could indicate that the trend is gaining momentum, with potential for further movement beyond the 127.2% and 161.8% levels. Chart Customization: Color-Coded Fibonacci Levels: Each Fibonacci level is color-coded for easy identification: Gray: 23.6% and 50.0% retracement levels Blue: 38.2% retracement level Yellow: 61.8% retracement level Red: 78.6% retracement level Purple: 100.0% level (the low of the range) Green: 127.2% and 161.8% extension levels The use of different colors allows for quick visual analysis, helping traders to distinguish between retracement and extension levels while identifying critical price zones on the chart. Tips for Effective Use: Monitor Price Action: Watch for price action signals like candlestick patterns, reversals, or trend-following indicators around these Fibonacci levels. Combine with Other Indicators: To improve the reliability of the Fibonacci levels, combine them with other technical analysis tools such as moving averages, RSI, or MACD for confirmation of potential reversals or breakouts. Adjust the Lookback Period: The lookback period can be adjusted to fit the time frame and asset being traded. A shorter lookback period may provide more sensitive levels, while a longer one may offer more reliable, long-term reference points. This indicator is most useful when combined with your trading strategy to spot potential price points for reversals or continued movements.
Pine Script®指標
由talaldx提供
Seasonal Pattern DecoderSeasonal Pattern Decoder The Seasonal Pattern Decoder is a powerful tool designed for traders and analysts who want to uncover and leverage seasonal tendencies in financial markets. Instead of cluttering your chart with complex visuals, this indicator presents a clean, intuitive table that summarizes historical monthly performance, allowing you to spot recurring patterns at a glance. How It Works The indicator fetches historical monthly data for any symbol and calculates the percentage return for each month over a specified number of years. It then organizes this data into a comprehensive table, providing a clear, year-by-year and month-by-month breakdown of performance. Key Features Historical Performance Table: Displays monthly returns for up to a user-defined number of years, making it easy to compare performance across different periods. Color-Coded Heatmap: Each cell is colored based on the performance of the month. Strong positive returns are shaded in green, while strong negative returns are shaded in red, allowing for immediate visual analysis of monthly strength or weakness. Annual Summary: A "Σ" column shows the total percentage return for each full calendar year. AVG Row: Calculates and displays the average return for each month across all the years shown in the table. WR Row: Shows the "Win Rate" for each month, which is the percentage of time that month had a positive return. This is crucial for identifying high-probability seasonal trends. How to Use Add the "Seasonal Pattern Decoder" indicator to your chart. Note that it works best on Daily, Weekly, or Monthly timeframes. A warning message will be displayed on intraday charts. In the indicator settings, adjust the "Lookback Period" to control how many years of historical data you want to analyze. Use the "Show Years Descending" option to sort the table from the most recent year to the oldest. The "Heat Range" setting allows you to adjust the sensitivity of the color-coding to fit the volatility of the asset you are analyzing. This tool is ideal for confirming trading biases, developing seasonal strategies, or simply gaining a deeper understanding of an asset's typical behavior throughout the year. ## Disclaimer This indicator is designed as a technical analysis tool and should be used in conjunction with other forms of analysis and proper risk management. Past performance does not guarantee future results, and traders should thoroughly test any strategy before implementing it with real capital.
Pine Script®指標
由dchunt-stack提供
Cycle Indicator CS7This indicator visualizes cyclical structures (including inverse cycles) for financial instruments. It is highly customizable and comes with a default configuration optimized for cryptocurrencies on a 45-minute timeframe, highlighting the following cycles: • T-3: Daily cycles • T-2: Approximately 2-day cycles • T+1: Bi-weekly cycles • T-1: Approximately 4-day cycles • T: Weekly cycles The same setup can also be applied effectively on a 24-hour timeframe, highlighting the following longer-term cycles: • T+2: Monthly cycles • T+3: Quarterly cycles • T+4: Semi-annual cycles • T+5: Annual cycles • T+6: Bi-annual cycles Users can customize the configurations to suit the specific characteristics of any financial instrument. Additionally, the indicator includes a prediction system that approximates future cycles, marking them with a “?”.
Pine Script®指標
由CS7_提供
MACD Forecast [Titans_Invest]MACD Forecast — The Future of MACD in Trading The MACD has always been one of the most powerful tools in technical analysis. But what if you could see where it’s going, instead of just reacting to what has already happened? Introducing MACD Forecast — the natural evolution of the MACD Full , now taken to the next level. It’s the world’s first MACD designed not only to analyze the present but also to predict the future behavior of momentum. By combining the classic MACD structure with projections powered by Linear Regression, this indicator gives traders an anticipatory, predictive view, redefining what’s possible in technical analysis. Forget lagging indicators. This is the smartest, most advanced, and most accurate MACD ever created. 🍟 WHY MACD FORECAST IS REVOLUTIONARY Unlike the traditional MACD, which only reflects current and past price dynamics, the MACD Forecast uses regression-based projection models to anticipate where the MACD line, signal line, and histogram are heading. This means traders can: • See MACD crossovers before they happen. • Spot trend reversals earlier than most. • Gain an unprecedented timing advantage in both discretionary and automated trading. In other words: this indicator lets you trade ahead of time. 🔮 FORECAST ENGINE — POWERED BY LINEAR REGRESSION At its core, the MACD Forecast integrates Linear Regression (ta.linreg) to project the MACD’s future behavior with exceptional accuracy. Projection Modes: • Flat Projection: Assumes trend continuity at the current level. • LinReg Projection: Applies linear regression across N periods to mathematically forecast momentum shifts. This dual system offers both a conservative and adaptive view of market direction. 📐 ACCURACY WITH FULL CUSTOMIZATION Just like the MACD Full, this new version comes with 20 customizable buy-entry conditions and 20 sell-entry conditions — now enhanced with forecast-based rules that anticipate crossovers and trend reversals. You’re not just reacting — you’re strategizing ahead of time. ⯁ HOW TO USE MACD FORECAST❓ The MACD Forecast is built on the same foundation as the classic MACD, but with predictive capabilities. Step 1 — Spot Predicted Crossovers: Watch for forecasted bullish or bearish crossovers. These signals anticipate when the MACD line will cross the signal line in the future, letting you prepare trades before the move. Step 2 — Confirm with Histogram Projection: Use the projected histogram to validate momentum direction. A rising histogram signals strengthening bullish momentum, while a falling projection points to weakening or bearish conditions. Step 3 — Combine with Multi-Timeframe Analysis: Use forecasts across multiple timeframes to confirm signal strength (e.g., a 1h forecast aligned with a 4h forecast). Step 4 — Set Entry Conditions & Automation: Customize your buy/sell rules with the 20 forecast-based conditions and enable automation for bots or alerts. Step 5 — Trade Ahead of the Market: By preparing for future momentum shifts instead of reacting to the past, you’ll always stay one step ahead of lagging traders. 🤖 BUILT FOR AUTOMATION AND BOTS 🤖 Whether for manual trading, quantitative strategies, or advanced algorithms, the MACD Forecast was designed to integrate seamlessly with automated systems. With predictive logic at its core, your strategies can finally react to what’s coming, not just what already happened. 🥇 WHY THIS INDICATOR IS UNIQUE 🥇 • World’s first MACD with Linear Regression Forecasting • Predictive Crossovers (before they appear on the chart) • Maximum flexibility with Long & Short combinations — 20+ fully configurable conditions for tailor-made strategies • Fully automatable for quantitative systems and advanced bots This isn’t just an update. It’s the final evolution of the MACD. ______________________________________________________ 🔹 CONDITIONS TO BUY 📈 ______________________________________________________  •   Signal Validity: The signal will remain valid for X bars .  •   Signal Sequence: Configurable as AND or OR . 🔹 MACD > Signal Smoothing 🔹 MACD < Signal Smoothing 🔹 Histogram > 0 🔹 Histogram < 0 🔹 Histogram Positive 🔹 Histogram Negative 🔹 MACD > 0 🔹 MACD < 0 🔹 Signal > 0 🔹 Signal < 0 🔹 MACD > Histogram 🔹 MACD < Histogram 🔹 Signal > Histogram 🔹 Signal < Histogram 🔹 MACD (Crossover) Signal 🔹 MACD (Crossunder) Signal 🔹 MACD (Crossover) 0 🔹 MACD (Crossunder) 0 🔹 Signal (Crossover) 0 🔹 Signal (Crossunder) 0 🔮 MACD (Crossover) Signal Forecast 🔮 MACD (Crossunder) Signal Forecast ______________________________________________________ ______________________________________________________ 🔸 CONDITIONS TO SELL 📉 ______________________________________________________  •   Signal Validity: The signal will remain valid for X bars .  •   Signal Sequence: Configurable as AND or OR . 🔸 MACD > Signal Smoothing 🔸 MACD < Signal Smoothing 🔸 Histogram > 0 🔸 Histogram < 0 🔸 Histogram Positive 🔸 Histogram Negative 🔸 MACD > 0 🔸 MACD < 0 🔸 Signal > 0 🔸 Signal < 0 🔸 MACD > Histogram 🔸 MACD < Histogram 🔸 Signal > Histogram 🔸 Signal < Histogram 🔸 MACD (Crossover) Signal 🔸 MACD (Crossunder) Signal 🔸 MACD (Crossover) 0 🔸 MACD (Crossunder) 0 🔸 Signal (Crossover) 0 🔸 Signal (Crossunder) 0 🔮 MACD (Crossover) Signal Forecast 🔮 MACD (Crossunder) Signal Forecast ______________________________________________________ ______________________________________________________ 🔮 Linear Regression Function 🔮 ______________________________________________________ • Our indicator includes MACD forecasts powered by linear regression. Forecast Types: • Flat: Assumes prices will stay the same. • Linreg: Makes a 'Linear Regression' forecast for n periods. Technical Information: • Function: ta.linreg() Parameters: • source: Source price series. • length: Number of bars (period). • offset : Offset. • return: Linear regression curve. ______________________________________________________ ______________________________________________________ ⯁ UNIQUE FEATURES ______________________________________________________ Linear Regression: (Forecast) Signal Validity: The signal will remain valid for X bars Signal Sequence: Configurable as AND/OR Table of Conditions: BUY/SELL Conditions Label: BUY/SELL Plot Labels in the graph above: BUY/SELL Automate & Monitor Signals/Alerts: BUY/SELL Linear Regression (Forecast) Signal Validity: The signal will remain valid for X bars Signal Sequence: Configurable as AND/OR Table of Conditions: BUY/SELL Conditions Label: BUY/SELL Plot Labels in the graph above: BUY/SELL Automate & Monitor Signals/Alerts: BUY/SELL ______________________________________________________ 📜 SCRIPT : MACD Forecast 🎴 Art by  : @Titans_Invest & @DiFlip 👨‍💻 Dev by : @Titans_Invest & @DiFlip 🎑 Titans Invest — The Wizards Without Gloves 🧤 ✨ Enjoy! ______________________________________________________ o Mission 🗺 • Inspire Traders to manifest Magic in the Market. o Vision 𐓏 • To elevate collective Energy 𐓷𐓏 🎗️ In memory of João Guilherme — your light will live on forever.
Pine Script®指標
由Titans_Invest提供
Gamma Exposure Levels by OMG (Oh My Gamma)OMG (Oh My Gamma) - Daily GEX Levels An operational framework for Gamma analysis with daily data. Indicator's Purpose & Demo Data This indicator plots key strategic levels derived from Gamma Exposure (GEX) analysis. It showcases the operational logic of OhMyGamma analytical engine. IMPORTANT: The levels plotted by this public script are based on a past date's snapshot for demonstration purposes. They are not valid for live trading and will not update automatically. The real edge comes from using the fresh data structure provided daily. How to Read the Levels This indicator is designed to provide actionable intelligence, not just data. Here's how to read it: The Levels: Each line represents a key strategic zone (Zero Gamma, Call/Put Walls, etc.) where a market reaction is statistically probable due to dealer hedging flows. Line Thickness = Strategic Importance: The thickness of each line directly corresponds to its strategic rating. Thicker, solid lines represent higher-conviction zones. Labels & Tooltips: Hover over a level's label on your chart to see its full description, confluences, and strategic rating. Pro Tip: The Power of Confluence This indicator is not a standalone "system". It's an institutional-grade intelligence layer. Its predictive power increases exponentially when used to find confluence with your own analysis. The highest-probability trades occur when a key Gamma level aligns with: Price Action: Key support/resistance zones, order blocks, or liquidity pools. Volumetric Indicators: High/Low Volume Nodes (HVN/LVN) from Volume Profile, VWAP, and Anchored VWAP. Use these levels to confirm your setups and gain the conviction to act. How to Get the Daily Updated Script This indicator requires a new Pine Script code each day to load the current session's data. To get the daily updated code feel free to visit www.ohmygamma.com Feedback & Suggestions This tool is built for the community. Suggestions for improvements and new features are highly welcome and help the project evolve. Feel free to get in touch via the contact form on the website. Disclaimer: This tool is for informational and educational purposes only. Trading involves significant risk. The authors assume no responsibility for any trading decisions.
Pine Script®指標
由StefanoRaviola提供
FVG - Fair Value GapsFair Value Gap (FVG) Boxes – Pine Script v6 This indicator highlights bullish and bearish Fair Value Gaps on any market and timeframe—without placing trades. Perfect if you only want to see and react to clean price gaps. GET THE CODE (Official DTC Telegram Channel): t.me Features • Detects classic 3-candle bullish & bearish FVGs automatically • Draws neat, semi-transparent boxes with adjustable border width & colors • Lets you set up to 7 fully custom sessions (London, NY, Asia etc.) • Forward-box length control (extend each FVG a set number of bars) • No strategy code, no backtest clutter—pure visual clarity Usage Tips 1. Add to any chart and timeframe. 2. Turn on only the sessions you trade. 3. Use with your own alerts or strategies to create confluence. ✅ Works on Forex, crypto, indices, stocks. ⚠️ For educational/analysis purposes only—does not generate trades or orders.
Pine Script®指標
由TheDTCEduOfficial提供
MAs+Engulfing O caminho das Criptos This indicator overlays multiple moving averages (EMAs 20/50/100/200 and SMA 200) and highlights bullish/bearish engulfing candles by dynamically coloring the candle body. When a bullish engulfing is detected, the candle appears as a strong dark green; for bearish engulfing, a more vivid red. Normal candles keep classic lime/red colors. Visual alerts and bar coloring make price-action patterns instantly visible. Includes built-in alert conditions for both patterns, supporting both trading automation and education. The tool upgrades trend-following setups by combining structure with automatic price action insights. Este indicador combina médias móveis (EMAs de 20/50/100/200 e SMA 200) com detecção de engolfo de alta/baixa, colorindo o candle automaticamente: engolfo de alta com verde escuro, engolfo de baixa com vermelho destacado. Inclui alertas automáticos para ambos os padrões, perfeito para análise visual, estratégia, ou ensino.
Pine Script®指標
由igorfreitasnf提供
AstraAlgo IndicatorOVERVIEW The AstraAlgo Indicator delivers precise, actionable trade signals on TradingView. With configurable signal modes, dynamic support and resistance, and a fully adjustable alerts system, it helps traders make informed decisions and manage risk effectively. SIGNAL MODES Signal Modes are the core of the AstraAlgo Indicator, providing users with proprietary trade signals tailored to their preferred complexity and style. BAR COLORING Bar Coloring provides a clear visual distinction between bullish and bearish candlesticks, allowing traders to interpret price action at a glance. This feature helps identify momentum and trend direction without analyzing raw price data. ASTRA CLOUD Astra Cloud is a dynamic support and resistance overlay that visually highlights key price zones on your TradingView charts. These zones adjust in real time to reflect market movements, helping traders identify areas of potential price reaction. ALERTS Alerts in the AstraAlgo Indicator are designed to keep traders informed of key market movements in real time. They notify you whenever a significant trading signal appears on your chart, ensuring you can act promptly even when you’re away from TradingView.
Pine Script®指標
由AstraAlgo提供
2
Breakout Levels Checklist# Description (EN) ## Breakout Levels Checklist — ATR (Classic shown, Active = 5-Day Median or Manual), D1-Fixed, Risk Position Sizing This script is an on-chart checklist for breakout trades with a daily-fixed ATR core and a simple risk calculator. ATR values are latched on **D1**, so SL/TP remain stable when you switch timeframes. The UI (inputs and panel) is in Russian. ### What it does - **Checklist**: three groups (Prerequisites, Negatives, Waiting). You tick items; the panel shows a clean list with counters. - **Breakout calculations**: Entry, Stop-Loss, Take-Profit from your level price, **k × ATR** stop, and an RR preset. A built-in entry offset ≈ **12.5%** of the stop distance is applied. - **ATR engine (D1)**: - **Classic ATR** (period selectable; HL or True Range) — **always computed and displayed** for reference and daily progress. - **Active ATR** = either **5-day median ATR** with optional *paranormal bar* filter (filters both too-big and too-small D1 ranges by percentage thresholds vs a blended reference), **or Manual ATR** if enabled. - **Risk calculator**: given **Deposit** and **Risk %**, the script outputs the **entry notional (USD)** so an SL hit is approximately equal to your dollar risk; the panel also shows potential PnL to take-profit. - **Stable visuals**: level / entry / SL / TP lines with automatic cleanup on a new day; panel can be placed in any corner (RU labels). ### How to use 1. Set **Direction** (Long/Short) and the **Level Price**. 2. Tick checklist items as the setup forms. 3. In **ATR**, leave Classic as reference (period + HL/TR), and choose the **Active ATR mode**: *5-day median* (with optional paranormal filter) **or** *Manual* (manual value overrides). 4. Pick **k** for **Stop = k × ATR**; TP is placed by the **RR** preset relative to stop size. 5. In **Calculator**, set **Deposit** and **Risk %** — the panel returns the **entry notional** aligned with your risk. 6. Show/hide panel sections (calculations / ATR / calculator) as needed. ### Quick notes - Classic ATR is not selectable; it is always calculated and shown for context and D1 progress. - Active ATR drives stop sizing: *5-day median (with filter)* or *Manual*. - All ATR computations use **closed D1 bars**; values are cached per day. --- # Описание (RU) ## Чек-лист уровней (Пробой) — ATR (классический показывается, Активный = медианный 5-дневный или Ручной), фиксация D1, расчёт позиции от риска Скрипт для работы с пробойными сетапами: чек-лист на графике, фиксированный дневной ATR, расчёт ТВХ/SL/TP и простой калькулятор позиции от риска. Значения ATR фиксируются на **D1**, поэтому SL/TP не «плавают» при смене таймфреймов. Интерфейс (входы и панель) — на русском. ### Что делает - **Чек-лист**: три группы (Предпосылки, Минусы, Ожидаю). Отмечаете галочки — панель выводит список и счётчики. - **Расчёты пробоя**: ТВХ, Стоп-лосс, Тейк-профит от цены уровня; стоп как **k × ATR**; тейк задаётся пресетом **RR**; встроен люфт входа ≈ **12.5%** от дистанции стопа. - **ATR (D1)**: - **Классический ATR** (период, HL или True Range) — **всегда считается и показывается** как справочное значение и для прогресса дня. - **Активный ATR** = **медианный за 5 дней** с опциональным фильтром *паранормальных* баров (одной галочкой отсекаются одновременно слишком большие и слишком маленькие дневные диапазоны по процентным порогам к смешанному референсу) **или** **Ручной ATR** (ручное значение имеет приоритет). - **Калькулятор риска**: по **Депозиту** и **Риску %** отдаёт **сумму входа (USD)** так, чтобы убыток по стопу был близок к заданному риску; дополнительно показывает потенциальный PnL по тейку. - **Стабильная отрисовка**: линии Уровень / ТВХ / SL / TP, авто-очистка на новый день; позиция панели выбирается (русские подписи углов). ### Как работать 1. Задайте **Направление** (Long/Short) и **Цену уровня**. 2. Отметьте пункты чек-листа под текущий контекст. 3. В **ATR** используйте **Классический** как справочный (период + HL/TR), а **Активный ATR** выберите как *медианный 5-дневный* (с фильтром при необходимости) **или** *Ручной* (ручное значение замещает активный). 4. Укажите **k** для **Стоп = k × ATR**; тейк выставляется пресетом **RR** относительно размера стопа. 5. В **Калькуляторе** задайте **Депозит** и **Риск %** — получите **сумму входа**, согласованную с риском. 6. В панели можно скрывать/показывать секции (расчёты / ATR / калькулятор). ### Важные примечания - Классический ATR не выбирается пользователем — он всегда считается и отображается для контекста и прогресса по дню. - Активный ATR используется для расчёта стопа: медианный 5D (с фильтром) или ручной. - Все расчёты ATR делаются по **закрытым барам D1**; значения кэшируются на день.
Pine Script®指標
由Trader_Journal提供
Effort vs Result TRFxThe Effort vs Result (EVR) indicator is designed to identify high-probability reversal signals based on volume and price action dynamics. It highlights points where the market “effort” (high volume) does not correspond to an immediate “result” (price continuation), providing actionable trade setups for both bullish and bearish scenarios. Features: Detects bullish EVR signals when a previous high-volume sell candle is followed by a strong bullish candle that sweeps the previous low. Detects bearish EVR signals when a previous high-volume buy candle is followed by a strong bearish candle that sweeps the previous high. Sticky arrows plot automatically above or below the candle, ensuring the signal moves with the price bar. Considers inside bars, wick size, and relative volume to filter low-quality setups. Fully compatible with multiple timeframes. Inputs: Volume Multiplier: Sets how much higher the current candle’s volume should be compared to the previous candle to count as high volume. Min Wick % of Candle: Minimum wick size relative to the candle body to filter insignificant bars. Max Inside Bars to Ignore: Number of inside bars between the previous candle and the EVR candle to ignore minor consolidations. Usage: (Green Arrow): Enter long when a green arrow appears below the candle. Place stop-loss slightly below the previous swing low. (Red Arrow): Enter short when a red arrow appears above the candle. Place stop-loss slightly above the previous swing high. Can be combined with support/resistance levels, trendlines, or other technical indicators for higher accuracy. Benefits: Simple and clean visual signals with tiny arrows that move with candles. Helps traders identify high-probability reversal points based on volume and price action. Ideal for intraday and swing trading strategies.
Pine Script®指標
由MALIK897提供
Order Block TraderThe Order Block (HTF) indicator automatically detects and plots higher timeframe order blocks directly onto your chart. Order blocks represent zones of institutional buying or selling pressure that often act as powerful support or resistance levels when revisited. This tool is designed for traders who want to align their lower timeframe entries with higher timeframe structure, helping to filter noise and focus on the most meaningful price levels. What This Indicator Does Scans a higher timeframe of your choice to identify potential bullish and bearish order blocks. Draws the blocks on your current chart, extending them forward in time as reference zones. Highlights trade signals when price returns to and reacts at these order blocks. Optionally triggers alerts so that you never miss a potential opportunity. How It Can Be Used Successfully Bullish Setup: A bullish order block may serve as a demand zone. When price revisits it, look for bullish confirmation such as a bounce from the block low and a close back above it. This can be used as a long entry point, with stops placed just below the block. Bearish Setup: A bearish order block may serve as a supply zone. When price revisits it, watch for rejection at the block high followed by a close back below it. This can be used as a short entry point, with stops placed just above the block. Multi-Timeframe Trading: Use order blocks from larger timeframes (e.g., 4H or Daily) as key zones, then drill down to shorter timeframes (e.g., 5m, 15m) to refine entries. Confluence with Other Tools: Combine order block signals with your existing strategy—trend indicators, Fibonacci levels, moving averages, or candlestick patterns—for stronger confirmation and improved win probability. Trade Management: Treat order blocks as zones rather than single price levels. Position sizing, stop placement, and risk-to-reward management remain essential for long-term success. This indicator is not a standalone trading system but a framework for identifying high-probability supply and demand zones. Traders who apply it consistently—alongside proper risk management and confirmation methods—can improve their ability to catch trend continuations and reversals at structurally important levels.
Pine Script®指標
由abedmahmood提供
KAMENICZKI PROSCAPLERPROSCAPLER is an advanced trading indicator that combines a dynamic channel with a prediction line for maximum accuracy and trading success. The indicator is designed for professional traders who need reliable signals with high success rates. Adaptive Intelligence Automatic optimal period detection - the indicator adapts to various market conditions Intelligent timeframe settings - automatically optimizes periods based on TF Dynamic adaptation - the channel changes according to volatility and trend. High Signal Accuracy Pearson R correlation - filters only strong trends with high reliability Multi-timeframe confirmation - confirms signals on higher timeframe Volatility and volume filters - eliminates false signals RSI extreme values - captures only the best entry points Prediction Line Future price direction - shows where the price will move Adaptive length - adapts to timeframe Strong signals - when the entire prediction line is in the center of the channel Quality Filters Minimum Pearson R 0.5+ - only strong trends Volume filter 1.2x - only signals with sufficient volume ATR volatility filter - eliminates low volatility RSI extreme levels - only at oversold/overbought values Anomalies Anomaly detection - captures exceptional opportunities Bright yellow/pink color - immediately visible Fast Reaction Minimum trend bars = 1 - fast turning Adaptive detection - immediate reaction to changes Automatic optimizations - without manual settings News & Volatility Filters News filter - disables channel during high impact news Volatility filter - protects against high volatility Gap detection - filters dangerous gaps Combined Filters All filters must be met - maximum reliability Multi-timeframe confirmation - double check Pearson R validation - mathematical accuracy Volume confirmation - institutional interest Reaction Speed Instant signals - without delay Adaptive settings - automatic optimization Fast turning - minimum 1 bar trend Signal Accuracy Quality filters increase success rate to 70-80% Anomalies have 80-90% success rate STRONG signals (prediction line in center) 85-95% HAVE FUN :)
Pine Script®指標
由kameniczkifx提供
Opening Range BoxThis indicator, called the "Opening Range Box," is a visual tool that helps you track the start of key trading sessions like London and New York (or whatever session you set). It does three main things: Finds the Daily 'First Move': It automatically calculates the High and Low reached during the first 30 minutes (or whatever time you set) of each defined session. Draws a Box: It immediately draws a colored, transparent box on your chart from the moment the session starts. The top of the box is the OR High, and the bottom is the OR Low. This box acts as a clear reference for the session's initial boundaries. Extends the Levels: After the initial 30 minutes are over, the box stops growing vertically (it locks in the OR High/Low) but continues to stretch out horizontally for the rest of the trading session. This allows you to easily see how the price reacts to the opening levels throughout the day. In short: It visually highlights the most important price levels established at the very beginning of the major market sessions.
Pine Script®指標
由andrejsemjonovs提供
Pro Momentum Table + Trade Alerts📊 Indicator Name: Pro Momentum Table – ADX + DI + ATR + Astro Timing 🧠 Concept: This indicator is designed for professional scalpers and intraday traders who want to capture only strong momentum waves — not noise. It combines trend strength, volatility, directional movement, momentum oscillation, vega divergence, and astrological timing into a single compact table on your chart. ⚙️ Components Explained: Metric Description ADX (Average Directional Index) Measures the strength of the trend. Values above 20 indicate that a meaningful move is starting. +DI / -DI (Directional Indicators) Show whether buyers (+DI) or sellers (-DI) are dominating. Increasing +DI with ADX rising = bullish momentum. Increasing -DI with ADX rising = bearish momentum. ATR (Average True Range) Shows volatility and expected range. Used for setting realistic stop-loss and multi-level targets (1×, 1.5×, 2×, 2.5× ATR). Price Displays the current price level for quick reference. CMO (Chande Momentum Oscillator) Measures short-term momentum direction and strength. Helps identify overbought/oversold conditions in trend continuation. Vega Divergence Shows a synthetic reading of volatility pressure — "Bullish" when volatility expansion supports upward moves, "Bearish" for downward pressure, and "Neutral" otherwise. Astro Remark Suggests ideal time windows based on planetary cycles for scalping entries. “Bullish Window” often aligns with high-probability long trades; “Bearish Window” favors shorts. Trade Signal The core momentum condition: “Bullish Momentum” if ADX > 20 and +DI rising, “Bearish Momentum” if ADX > 20 and -DI rising, else “No Clear Momentum.” 📈 How to Use: Wait for ADX > 20 – This confirms that the market is entering a strong momentum phase. Check DI direction: ✅ +DI rising: Buyers gaining strength → look for long setups. ✅ -DI rising: Sellers gaining strength → look for short setups. Use ATR to plan exits: 🎯 TP1 = Entry ± 1 × ATR 🎯 TP2 = Entry ± 1.5 × ATR 🎯 TP3 = Entry ± 2 × ATR 🎯 TP4 = Entry ± 2.5 × ATR CMO & Vega Divergence: Confirm momentum direction and volatility expansion before committing. Astro Remark: Align your scalping activity with the planetary support window for higher probability trades. 🪙 Pro Tips for Scalpers: Only trade when ADX > 20 and DI is consistently rising. Ignore signals in choppy or sideways phases. Avoid trades if Vega is neutral and CMO is flat – these usually indicate fake breakouts. If targets aren’t hit within expected ATR-based time, treat the move as false and exit early. Combine with 9 EMA and 20 EMA (hidden) for wave structure confirmation without cluttering the chart. 💡 Summary: This indicator acts as a real-time trade decision dashboard. It removes clutter from the chart and delivers everything a professional scalper needs — strength, direction, volatility, momentum, timing, and actionable trade bias — all in one elegant table.
Pine Script®指標
由maheshdevne提供
Pattern Match & Forward Projection – Weekly (EN) Overview This indicator searches for recurring price patterns in weekly data and projects their average forward performance. The logic is based on historical pattern repetition: it scans past price sequences similar to the most recent one, then aggregates their forward returns to estimate potential outcomes. ⚠️ Important: The indicator is designed for weekly timeframe only. Using it on daily or intraday charts will trigger an error message. Settings (Inputs) Pattern Settings Pattern length (weeks): Number of weeks used to define the reference pattern. Forward length (weeks): Number of weeks into the future to evaluate after each pattern match. Lookback (weeks): Historical window to scan for past pattern matches. Normalize by shape (z-score): If enabled, patterns are normalized by z-score, focusing on shape similarity rather than absolute values. Distance threshold (Euclidean): Maximum allowed Euclidean distance between the reference pattern and historical candidates. Smaller values = stricter matching. Min. required matches: Minimum number of valid matches needed for analysis. Quality Filters Min required Hit%: Minimum percentage of positive outcomes (upside forward returns) required for the pattern to be considered valid. Return filter mode: Either: absolute average return ≥ threshold Long only: average return ≥ threshold Short only: average return ≤ -threshold Min avg return (%): Minimum average forward return threshold for validation. Visual Options Highlight historical matches (labels): Marks where in history similar patterns occurred. Max match labels to draw: Caps the number of match markers shown to avoid clutter. Draw average projection: Displays the average projected forward curve if conditions are met. Show summary panel: Enables/disables the information panel. Show weekly avg curve in panel: Adds a breakdown of average returns week by week. Projection color: Choose the color of the projected forward curve. What the Screen Shows Summary Panel (top-left by default) Total matches found in history Matches with valid forward data Average, minimum, and maximum distance (similarity measure) Average forward return and Hit% Distance threshold and normalization setting Weekly average forward curve (if enabled) Quality filter results (pass/fail) Projection Curve (dotted line on price chart) Drawn only if enough valid matches are found and filters are satisfied Represents the average forward performance of historical matches, anchored at the current bar Historical Match Labels (▲ markers) Small arrows below past bars where similar patterns occurred Tooltip: “Historical match” Forecast Logic The indicator does not predict the future in a deterministic way. Instead, it relies on a pattern-matching algorithm: The most recent N weeks (defined by Pattern length) are taken as the reference. The algorithm scans the last Lookback (weeks) for segments with similar shape and magnitude. Similarity is measured using Euclidean distance (optionally z-score normalized). For each valid match, the subsequent Forward length weeks are collected. These forward paths are averaged to generate a composite forward projection. The summary panel reports whether the current setup passes the quality filters (Hit% and minimum average return). Usage Notes Best used as a contextual tool, not a standalone trading system. Works only on weekly timeframe. Quality filters help distinguish between noisy and statistically meaningful patterns. A higher number of matches usually improves reliability, but very strict thresholds may reduce sample size. 📊 This tool is useful for traders who want to evaluate how similar historical setups have behaved and to visualize potential forward paths in a statistically aggregated way.
Pine Script®指標
由MarcoPernice提供
BayesCore Golden Bars BOVESPA Index-MiniIt is recommended to use this indicator for the Bovespa Index-Mini Futures. This indicator uses golden candles and dots that appear directly on the chart to draw the trader’s attention to potential entry opportunities (buy/sell). Usage: When the lines are in an uptrend, if the second golden candle is above the lines and moving upward, there is a buying opportunity. When the lines are in a downtrend, if the second golden candle is below the lines and moving downward, there is a selling opportunity. In a sideways market, do not execute trades. If you wish to trade in a sideways market, you can use the blue line as a guide: when the price is below the line, you buy; when it is above, you sell — this way, you can perform scalping. These golden signals are designed to highlight candles that align more closely with the moving averages (blue and green lines), increasing the likelihood of capturing trades in line with the prevailing trend. By concentrating on these highlighted points, traders can more easily identify high-probability setups while avoiding unnecessary distractions. The main purpose is to support longer trades on the Bovespa Index-Mini Futures, without adding new positions along the way. This approach helps traders maintain a safer and more consistent trading style. Always confirm whether the golden signals converge with the overall market trend.
Pine Script®指標
由ricciardi提供
BayesCore AI Golden BarsThis indicator analyzes the market candle by candle, using the overall trend as a reference to highlight entry opportunities (buy or sell) by coloring candles in gold. These golden bars signal probabilistic opportunities for entries and re-entries throughout the trade. We’ve added three classic moving averages so traders can have a visual reference of zones and trends to decide whether to act on the opportunities suggested by the indicator. Tip: The best entries usually occur near the regions of the moving averages (blue and green lines). That’s why we included these classic moving averages, to give traders a clear trend reference. Additionally, the indicator provides alerts such as “Only Buy,” “Only Sell,” or “No Action” to help traders maintain psychological discipline during the trading process and seek the best entries aligned with the market trend. Giant candles, which can signal the ignition force of a market trend, are also colored gold and marked with an elephant icon, symbolizing the “leader of the herd,” suggesting that the movement may be worth following. On the chart, the indicator plots two lines above and two lines below the candles near the active candle. These lines suggest possible stop-loss placements based on previous swing highs and lows, ensuring they are not overly costly stops. They serve only as indicative stop-loss positions, leaving it up to the trader to assess—based on their risk management—whether the suggested placement is appropriate. Always consider whether the golden candle coloring aligns with the overall market trend. Past results do not guarantee future returns.
Pine Script®指標
由ricciardi提供
WASDE DatesOverview WASDE Dates — a small, focused event indicator that displays confirmed USDA WASDE release dates for 2025 on the chart and marks each release day. The indicator is designed to be a lightweight timing tool for traders who want clean visual reminders and optional alerts around USDA WASDE publications. Features • Shows official WASDE release dates for 2025 in a compact chart table. • Draws on-chart markers and a dotted vertical line on WASDE release days. • Two alert conditions you can enable in TradingView: "WASDE Day Alert" and "WASDE 24h Reminder". • Simple table position control (Top/Bottom, Left/Right) in the indicator settings. • Minimal, self-contained code — no external data feeds or permissions required. How to use 1. Apply the indicator to any chart and timeframe. 2. Use the indicator settings to choose table position. 3. Enable Alerts (if desired) via TradingView Alerts → choose “WASDE Day Alert” or “WASDE 24h Reminder”. 4. This version contains 2025 confirmed dates only — verify dates for live trading and enable alerts as needed. Design & rationale This indicator is intentionally not a technical trading signal. It is an event scheduler focused on clarity and low overhead: combine it with your existing setup to avoid being surprised by WASDE publications and to quickly inspect price action around these event dates. Limitations & disclaimer • This script shows **confirmed 2025** WASDE dates only. It does not provide trading advice or entry/exit signals. Use at your own risk. • Double-check official USDA publishing times before executing trades. • No external links or contact information are included in this description to comply with TradingView publishing rules. Feature outlook (V2) Planned V2 (future release): enhanced countdown (days → hours/minutes), optional inclusion of estimated 2026 dates marked as (TBC), and an invite-only/protected advanced version with reaction overlays (T+1/T+3) and extended alert options. V2 will be announced on this script page when ready. Changelog v1 — public release: 2025 confirmed dates, release markers, alerts, table position control.
Pine Script®指標
由DerAndi72提供
Smart Money Support/Resistance — LiteSmart Money Support/Resistance — Lite Overview & Methodology This indicator identifies support and resistance as zones derived from concentrated buying and selling pressure, rather than relying solely on traditional swing highs/lows. Its design focuses on transparency: how data is sourced, how zones are computed, and how the on‑chart display should be interpreted. Lower‑Timeframe (LTF) Data The script requests Up Volume, Down Volume, and Volume Delta from a lower timeframe to expose intrabar order‑flow structure that the chart’s native timeframe cannot show. In practical terms, this lets you see where buyers or sellers briefly dominated inside the body of a higher‑timeframe bar. bool use_custom_tf_input = input.bool(true, title="Use custom lower timeframe", tooltip="Override the automatically chosen lower timeframe for volume calculations.", group=grpVolume) string custom_tf_input = input. Timeframe("1", title="Lower timeframe", tooltip="Lower timeframe used for up/down volume calculations (default 5 seconds).", group=grpVolume) import TradingView/ta/10 as tvta resolve_lower_tf(useCustom, customTF) => useCustom ? customTF : timeframe.isseconds ? "1S" : timeframe.isintraday ? "1" : timeframe.isdaily ? "5" : "60" get_up_down_volume(lowerTf) => = tvta.requestUpAndDownVolume(lowerTf) var float upVolume = na var float downVolume = na var float deltaVolume = na string lower_tf = resolve_lower_tf(use_custom_tf_input, custom_tf_input) = get_up_down_volume(lower_tf) upVolume := u_tmp downVolume := d_tmp deltaVolume := dl_tmp • Data source: TradingView’s ta.requestUpAndDownVolume(lowerTf) via the official TA library. • Plan capabilities: higher‑tier subscriptions unlock seconds‑based charts and allow more historical bars per chart. This expands both the temporal depth of LTF data and the precision of short‑horizon analysis, while base tiers provide minute‑level data suitable for day/short‑swing studies. • Coverage clarity: a small on‑chart Coverage Panel reports the active lower timeframe, the number of bars covered, and the latest computed support/resistance ranges so you always know the bounds of valid LTF input. Core Method 1) Data acquisition (LTF) The script retrieves three series from the chosen lower timeframe: – Up Volume (buyers) – Down Volume (sellers) – Delta (Up – Down) 2) Rolling window & extrema Over a user‑defined lookback (Global Volume Period), the algorithm builds rolling arrays of completed bars and scans for extrema: – Buyers_max / Buyers_min from Up Volume – Sellers_max / Sellers_min from Down Volume Only completed bars are considered; the current bar is excluded for stability. 3) Price mapping The extrema are mapped back to their source candles to obtain price bounds: – For “maximum” roles the algorithm uses the relevant candle highs. – For “minimum” roles it uses the relevant candle lows. These pairs define candidate resistance (max‑based) and support (min‑based) zones or vice versa. 4) Zone construction & minimum width To ensure practicality on all symbols, zones enforce a minimum vertical thickness of two ticks. This prevents visually invisible or overly thin ranges on instruments with tight ticks. 5) Vertical role resolution When both max‑ and min‑based zones exist, the script compares their midpoints. If, due to local price structure, the min‑based zone sits above the max‑based zone, display roles are swapped so the higher zone is labeled Resistance and the lower zone Support. Colors/widths are updated accordingly to keep the visual legend consistent. 6) Rendering & panel Two horizontal lines and a filled box represent each active zone. The Coverage Panel (bottom‑right by default) prints: – Lower‑timeframe in use – Number of bars covered by LTF data – Current Support and Resistance ranges If the two zones overlap, an additional “Range Market” note is shown. Key Inputs • Global Volume Period: shared lookback window for the extrema search. • Lower timeframe: user‑selectable override of the automatically resolved lower timeframe. • Visualization toggles: independent show/hide controls and colors for maximum (resistance) and minimum (support) zones. • Coverage Panel: enable/disable the single‑cell table and its readout. Operational Notes • The algorithm aligns all lookups to completed bars (no peeking). Price references are shifted appropriately to avoid using the still‑forming bar in calculations. • Second‑based lower timeframes improve granularity for scalping and very short‑term entries. Minute‑based lower timeframes provide broader coverage for intraday and short‑swing contexts. • Use the Coverage Panel to confirm the true extent of available LTF history on your symbol/plan before drawing conclusions from very deep lookbacks. Visual Walkthrough A step‑by‑step image sequence accompanies this description. Each figure demonstrates how the indicator reads LTF volume, locates extrema, builds price‑mapped zones, and updates labels/colors when vertical order requires it. Chart Interpretation This chart illustrates two distinct perspectives of the Smart Money Support/Resistance — Lite indicator, each derived from different lookback horizons and lower-timeframe (LTF) resolutions. 1- Short-term view (43 bars, 10-second LTF) Using the most recent 43 completed bars with 10-second intrabar data, the algorithm detects that both maximum and minimum volume extrema fall within a narrow range. The result is a clearly identified range market: resistance between 178.15–184.55 and support between 175.02–179.38. The Coverage Panel (bottom-right) confirms the scope of valid input: the lower timeframe used, number of bars covered, and the resulting zones. This short-term scan highlights how the indicator adapts to limited data depth, flagging sideways structure where neither side dominates. 2 - Long-term view (120 bars, 30-second LTF) Over a wider 120-bar lookback with higher-granularity 30-second data, broader supply and demand zones emerge. – The long-term resistance zone captures the concentration of buyers and sellers at the upper boundary of recent price history. – The long-term support zone anchors to the opposite side of the distribution, derived from maxima and minima of both buying and selling pressure. These zones reflect deeper structural levels where market participants previously committed significant volume. Combined Perspective By aligning the short-term and long-term outputs, the chart shows how the indicator distinguishes immediate consolidation (range market) from more durable support and resistance levels derived from extended history. This dual resolution approach makes clear that support and resistance are not static lines but dynamic zones, dependent on both timeframe depth and the resolution of intrabar volume data.
Pine Script®指標
由ata_sabanci提供