EulerMethod: DeltaEN
Shows the Integral Volume Delta (IVD)
It is a detailed OBV. Each bar sums up the volume for bars of a shorter timeframe.
For example, inside a 1M bar, every 12h bar is added up, and inside a 1h bar, every 1min bar is added. Thus, a conditional volume delta inside the bar is obtained.
The indicator for each bar shows the volume of purchases (positive), sales (negative) and the difference — IVD
The delta histogram is thicker than the volume histograms
Settings detalisation
M — 6 hours, 12 hours and 1 day for the M timeframe (720 by default)
W — 4 hours, 6 hours and 12 hours for the W timeframe (240 by default)
D — 30 minutes, 1 hour and 2 hours for the D timeframe (60 by default)
H — 1 minute, 5 minutes and 15 minutes for timeframes [1h, D) (default is 1)
For timeframes of 15m and less, the calculation is carried out by minute bars
VSA mode
The classic OBV adds volume to the cumulative sum under the condition Сlose (n) > Close (n-1) and subtracts it under the condition Close (n) < Close (n-1)
When VSA mode is disabled, all volumes are summed up under these conditions.
When the VSA approximation is turned on, the volume per bar of detail is divided by the factor (Close - Low) / (High - Low)
That is, it takes into account the spread per bar and closing relative to the spread. VSA is enabled by default
A/D mode
Shows the cumulative Accumulation / Distribution Index
The delta of the detail bar is multiplied by (High + Low + Close) / 3 bars, the result is added to the cumulative sum
No additional price conversions required due to integral summation
Index line view is customizable
EM Delta does not receive intermediate values in real time.
To see the result, wait until the bar closes or switch to a smaller timeframe
RU
Показывает Интегральную Дельту Объёма (ИДО)
Представляет собой детализированный OBV. В каждом баре суммируется объём за бары меньшего таймфрейма.
Например, внутри 1М-бара суммируется каждый 12h-бар, а внутри 1h — каждый 1m-бар. Таким образом получается условная дельта объёма внутри бара
Индикатор на каждый бар показывает объём покупок (положительный), объём продаж (отрицательный) и разницу — ИДО
Гистограмма дельты толще гистограмм объёмов
Настройки детализации внутри бара
M — 6 часов, 12 часов и 1 день для таймфрейма M (по-умолчанию 720)
W — 4 часа, 6 часов и 12 часов для таймфрейма W (по-умолчанию 240)
D — 30 минут, 1 час и 2 часа для таймфрейма D (по-умолчанию 60)
H — 1 минута, 5 минут и 15 минут для таймфреймов [1h, D) (по-умолчанию 1)
Для таймфреймов 15m и меньше расчёт ведётся по минутным барам
Режим VSA
Классический OBV прибавляет объём к кумулятивной сумме при условии Сlose(n) > Close(n-1) и отнимает при условии Close(n) < Close(n-1)
При отключении режима VSA все объёмы суммируются по этим условиям
При включённой VSA-аппроксимации объём за бар детализации делится по фактору (Close - Low) / (High - Low)
То есть учитывает спред за бар и закрытие относительно спреда. По-умолчанию режим VSA включен
Режим A/D
Показывает кумулятивный индекс Накопления/Распределения
Дельта бара детализации умножается на (High + Low + Close) / 3 бара, результат прибавляется к кумулятивной сумме
Дополнительные преобразования цены не требуются ввиду интегрального суммирования
Вид линии индекса настраивается
EM Delta не получает промежуточные значения в реальном времени.
Чтобы увидеть результат, дождитесь закрытия бара или перейдите на меньший таймфрейм
在腳本中搜尋"市值60亿的股票"
ICHIMOKU MTFMultiple Time Frame Version of Ichimoku Kinko Hyo Indicator.
Created in 1940's by Goichi Hosoda withe the help of University students in Japan.
Ichimoku is one of the best trend following indicators that works nearly perfect in all markets and time frames.
Ichimoku is originally an built in indicator in Tradingview but there are some problems like:
the indicator hast 5 lines but you can change only 4 parameters in the settings menu of Tradingview Charts which you could only control 3 of the lines effectively. A second problem is that Tradingview preferred to use English titles for the ICHIMOKU lines instead of giving them the most common original Japanese ones. (So I rewrite the indicator)
Kijun Sen (blue line): Also called standard line or base line, this is calculated by averaging the highest high and the lowest low for the past 26 periods.
Tenkan Sen (red line): This is also known as the turning line and is derived by averaging the highest high and the lowest low for the past nine periods.
Chikou Span (Plum line): This is called the lagging line. It is today’s closing price plotted 26 periods behind.
Senkou SpanA (green line): The first Senkou line is calculated by averaging the Tenkan Sen and the Kijun Sen and plotted 26 periods ahead.
Senkou SpanB (purple line):
The second Senkou line is determined by averaging the highest high and the lowest low for the past 52 periods and plotted 26 periods ahead.
PERSONALLY I ADVISE YOU TO USE ICHIMOKU WITH DEAFULT LENGTHS (9,26,26,52,26) IN ORDER FOR STOCK MARKETS AND FOREX MARKETS
FOR CRYPTO YOU'D BETTER USE:
10,30,30,60,30 OR 20,60,60,120,60
THE TRICKY THING IS THAT KEEPING THE 1-3-3-6-3 RATIO CONSTANT IS NECESSARY
Here's a link of my Youtube video explaining ICHIMOKU but unfortunately only in TURKISH:
www.youtube.com
Developed by: Goichi Hosoda
Here's the link to a complete list of all my indicators:
tr.tradingview.com
Ichimoku kullanımı anlattığım detaylı video serisini linkten izleyebilirsiniz:
www.youtube.com
İndikatörü geliştiren: Goichi Hosoda
ICHIMOKU Kinko Hyo by KIVANC fr3762Created in 1940's by Goichi Hosoda withe the help of University students in Japan.
Ichimoku is one of the best trend following indicators that works nearly perfect in all markets and time frames.
Ichimoku is originally an built in indicator in Tradingview but there are some problems like:
the indicator hast 5 lines but you can change only 4 parameters in the settings menu of Tradingview Charts which you could only control 3 of the lines effectively. A second problem is that Tradingview preferred to use English titles for the ICHIMOKU lines instead of giving them the most common original Japanese ones. (So I rewrite the indicator)
Kijun Sen (blue line): Also called standard line or base line, this is calculated by averaging the highest high and the lowest low for the past 26 periods.
Tenkan Sen (red line): This is also known as the turning line and is derived by averaging the highest high and the lowest low for the past nine periods.
Chikou Span (Plum line): This is called the lagging line. It is today’s closing price plotted 26 periods behind.
Senkou SpanA (green line): The first Senkou line is calculated by averaging the Tenkan Sen and the Kijun Sen and plotted 26 periods ahead.
Senkou SpanB (purple line):
The second Senkou line is determined by averaging the highest high and the lowest low for the past 52 periods and plotted 26 periods ahead.
PERSONALLY I ADVISE YOU TO USE ICHIMOKU WITH DEAFULT LENGTHS (9,26,26,52,26) IN ORDER FOR STOCK MARKETS AND FOREX MARKETS
FOR CRYPTO YOU'D BETTER USE:
10,30,30,60,30 OR 20,60,60,120,60
THE TRICKY THING IS THAT KEEPING THE 1-3-3-6-3 RATIO CONSTANT IS NECESSARY
Here's a link of my Youtube video explaining ICHIMOKU but unfortunately only in TURKISH:
www.youtube.com
Developed by: Goichi Hosoda
Money Flow Index + AlertsThis study is based on the work of TV user Beasley Savage ( ) and all credit goes to them.
Changes I've made:
1. Added a visual symbol of an overbought/oversold threshold cross in the form of a red/green circle, respectively. Sometimes it can be hard to see when a cross actually occurs, and if your scaling isn't set up properly you can get misleading visuals. This way removes all doubt. Bear in mind they aren't meant as trading signals, so DO NOT use them as such. Research the MFI if you're unsure, but I use them as an early warning and that particular market/stock is added to my watchlist.
2. Added 60/40 lines as the MFI respects these incredibly well in trends. E.g. in a solid uptrend the MFI won't go below 40, and vice versa. Use the idea of support and resistance levels on the indicator and it'll be a great help. I've coloured the zones. Strong uptrends should stay above 60, strong downtrends should stay below 40. The zone in between 40-60 I've called the transition zone. MFI often stays here in consolidation periods, and in the last leg of a cycle/trend the MFI will often drop into this zone after being above 60 or below 40. This is a great sign that you should get out and start looking to reverse your position. Hopefully it helps to spot divergences as well.
3. Added alerts based on an overbought/oversold cross. Also added an alert for when either condition is triggered, so hopefully that's useful for those struggling with low alert limits. Feel free to change the overbought/oversold levels, the alerts + crossover visual are set to adapt.
Like any indicator, don't use this one alone. It works best paired with indicators/techniques that contradict it. You'll often see a OB/OS cross, and price will continue on it's way for many weeks more. But MFI is a great tool for identifying upcoming trend changes.
Any queries please comment or PM me.
Cheers,
RJR
PT Magic - BTC/ETH Trigger Trend ChangesThis Script shows you how BTC/ETH Percentage change in trends affect coins you trade.
- For ETH market please change BTC in Setting for ETH
What you need it PT Magic:
{
"Name": "BTC1h", // UNIQUE market trend name (to be referenced by your triggers below)
"Platform": "CoinMarketCap", // Platform to grab prices from (Allowed values are: CoinMarketCap, Exchange)
"MaxMarkets": 1, // Number of markets/pairs to analyze sorted by 24h volume
"TrendMinutes": 60 // Number of minutes to build a trend (1440 = 24h, 720 = 12h, 60 = 1h)
},
{
"Name": "ETH1h", // UNIQUE market trend name (to be referenced by your triggers below)
"Platform": "CoinMarketCap", // Platform to grab prices from (Allowed values are: CoinMarketCap, Exchange)
"MaxMarkets": 2, // Number of markets/pairs to analyze sorted by 24h volume
"IgnoredMarkets": "BTC",
"TrendMinutes": 60 // Number of minutes to build a trend (1440 = 24h, 720 = 12h, 60 = 1h)
},
VWAP forex Yesterday Hi/Low update fix This script is an updte fix of an earlier script that stopped functioning when TradingView updated Pine script. This script plots Forex (24 hour session) VWAP, yesterday's high, low, open and close (HLOC),
the day before's HLOC -
Also plots higher timeframe 20 emas
1 minute 5, 15, 60 period 20 ema
5 minute 15, 60 period 20 ema
15 minute 60, 120 , 240 period 20 ema
60 minute 120, 240 period 20 ema
120 minute 240, D period 20 ema
240 minute D period 20 ema
Also signals inside bars (high is less than or equal to the previous bar's high and the low is greater than or equal to the previous low) the : true inside bars have a maroon triangle below the bar as well as a ">" above the bar.
If subsequest bars are inside the last bar before the last true inside bar they also are marked with an ">"
This is probably a slight variation from the way Leaf_West plots the inside bars.
It appears that he marks all bars that are inside the original bar until one a bar has a high or low
outside the original bar. But I would need to see an example on his charts.
The Time Session Glitch and the Fix FX_IDC, COINBASE and BITSTAMP:
The script will correctly default to 1700 hrs to 1700hrs EDT/EST session for FXCM.
Strangely some securities appear to erroneously start their session at 1200 hrs ie. My guess is that they are somehow tied to GMT+0 instead of New York time (GMT+5). See this for yourself by selecting EURUSD using the FXCM exchange (FX:EURUSD) and then EURUSD from the IDC exchange (FX_IDC:EURUSD). The FX-IDC session opening range starts 5 hours before it actually should at 1700 hrs EDT/EST. To correct for this I have implemented an automatic fix (default) and a user selected "5 hour time shift adjust. ment needed on some securities".
There is also a 4 hour time shift button which might be necessary when New York reverts from Eastern Standard Time to Eastern Daylight Time (1 hour difference) in March (and then back again in November). In the default auto adjust mode you will need to select the 1 hour time shift. That is if this glitch still exists at that time.
I have looked at other scripts, other than my own and where the script is available, that need to use information about the opening bar and all have the same time shift issue
COINBASE and BITSTAMP open at 0000 hours GMT. Since I use lines instead of circles or crosses I had to make a small adjustment to plot the lines correctly.
If it needs work let me know.
Jayy
VWAP forex Yesterday Hi/Low switchThis script plots VWAP, yesterday's high, low, open and close (HLOC), the day before's HLOC -
Also plots higher timeframe 20 emas including:
1 minute 5, 15, 60 period 20 ema
5 minute 15, 60 period 20 ema
15 minute 60, 120 , 240 period 20 ema
60 minute 120, 240 period 20 ema
120 minute 240, D period 20 ema
240 minute D period 20 ema
Also signals inside bars (high is less than or equal to the previous
bar's high and the low is greater than or equal to the previous low) the : true inside bars have a maroon triangle below the bar as well as a ">" above the bar.
If subsequent bars are inside the last bar before the last true inside bar they also are marked with an ">"
If you have suggestions let me know.
Jayy
HeikenAshi[1]This is the alert script so you can automate this strategy using AutoView:
Make sure to use
crossing down value 0.9 once per bar (on condition) for this.
For the alert Message if you're using AutoView:
Long GBPUSD
c=order b=short
c=position b=short l=200 t=market
b=long q=0.01 l=200 t=market tp=60 sl=60
Short GBPUSD
c=order b=long
c=position b=long l=200 t=market
b=short q=0.01 l=200 t=market tp=60 sl=60
HSM KILLZONE//@version=5
indicator('HSM KILLZONE', 'HSM KILLZONE', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('New York AM', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0700-1100', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('New York PM', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('1300-1600', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('Asian Sesh', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('2000-0000', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string('London', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('0200-0500', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
HSM MACROS//@version=5
indicator('HSM MACROS', 'HSM MACROS', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('MC1', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0820-0830', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('MC2', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('0920-0930', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('MC3', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('0950-1010', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string('MC4', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('1050-1110', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
HSM BULLET//@version=5
indicator('HSM BULLET', 'HSM BULLET', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('London Silver', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0300-0400', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('NY AM Bullet', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('1000-1100', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('NY PM Bullet', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('1400-1500', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string(' ', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('1000-1000', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
MTF RSI + ADX + ATR SL/TP vivekDescription:
This strategy combines the power of multi-timeframe RSI filtering with ADX trend confirmation and ATR-based risk management to capture strong directional moves.
🔑 Entry Rules:
• Daily RSI > 60
• 4H RSI > 60
• 1H RSI > 60
• 10m RSI > 40
• ADX (current timeframe) > 20
When all conditions align, a long entry is triggered.
🛡 Risk Management:
• ATR-based Stop-Loss (customizable multiplier)
• Take-Profit defined as a Risk-Reward multiple of the ATR stop
🎯 Why this Strategy?
• Ensures alignment across higher timeframes before entering a trade
• Uses ADX to avoid choppy/range-bound markets
• Built-in ATR stop-loss & take-profit for disciplined risk control
• Fully customizable parameters
This strategy is designed for trend-following swing entries. It works best on liquid instruments such as indices, forex pairs, and large-cap stocks. Always optimize the parameters based on your preferred asset and timeframe.
MTF RSI + ADX + ATR SL/TPThis strategy combines the power of multi-timeframe RSI filtering with ADX trend confirmation and ATR-based risk management to capture strong directional moves.
🔑 Entry Rules:
• Daily RSI > 60
• 4H RSI > 60
• 1H RSI > 60
• 10m RSI > 40
• ADX (current timeframe) > 20
When all conditions align, a long entry is triggered.
🛡 Risk Management:
• ATR-based Stop-Loss (customizable multiplier)
• Take-Profit defined as a Risk-Reward multiple of the ATR stop
🎯 Why this Strategy?
• Ensures alignment across higher timeframes before entering a trade
• Uses ADX to avoid choppy/range-bound markets
• Built-in ATR stop-loss & take-profit for disciplined risk control
• Fully customizable parameters
This strategy is designed for trend-following swing entries. It works best on liquid instruments such as indices, forex pairs, and large-cap stocks. Always optimize the parameters based on your preferred asset and timeframe.
Dual Volume Profiles: Session + Rolling (Range Delineation)Dual Volume Profiles: Session + Rolling (Range Delineation)
INTRO
This is a probability-centric take on volume profile. I treat the volume histogram as an empirical PDF over price, updated in real time, which makes multi-modality (multiple acceptance basins) explicit rather than assumed away. The immediate benefit is operational: if we can read the shape of the distribution, we can infer likely reversion levels (POC), acceptance boundaries (VAH/VAL), and low-friction corridors (LVNs).
My working hypothesis is that what traders often label “fat tails” or “power-law behavior” at short horizons is frequently a tail-conditioned view of a higher-level Gaussian regime. In other words, child distributions (shorter periodicities) sit within parent distributions (longer periodicities); when price operates in the parent’s tail, the child regime looks heavy-tailed without being fundamentally non-Gaussian. This is consistent with a hierarchical/mixture view and with the spirit of the central limit theorem—Gaussian structure emerges at aggregate scales, while local scales can look non-Gaussian due to nesting and conditioning.
This indicator operationalizes that view by plotting two nested empirical PDFs: a rolling (local) profile and a session-anchored profile. Their confluence makes ranges explicit and turns “regime” into something you can see. For additional nesting, run multiple instances with different lookbacks. When using the default settings combined with a separate daily VP, you effectively get three nested distributions (local → session → daily) on the chart.
This indicator plots two nested distributions side-by-side:
Rolling (Local) Profile — short-window, prorated histogram that “breathes” with price and maps the immediate auction.
Session Anchored Profile — cumulative distribution since the current session start (Premkt → RTH → AH anchoring), revealing the parent regime.
Use their confluence to identify range floors/ceilings, mean-reversion magnets, and low-volume “air pockets” for fast traverses.
What it shows
POC (dashed): central tendency / “magnet” (highest-volume bin).
VAH & VAL (solid): acceptance boundaries enclosing an exact Value Area % around each profile’s POC.
Volume histograms:
Rolling can auto-color by buy/sell dominance over the lookback (green = buying ≥ selling, red = selling > buying).
Session uses a fixed style (blue by default).
Session anchoring (exchange timezone):
Premarket → anchors at 00:00 (midnight).
RTH → anchors at 09:30.
After-hours → anchors at 16:00.
Session display span:
Session Max Span (bars) = 0 → draw from session start → now (anchored).
> 0 → draw a rolling window N bars back → now, while still measuring all volume since session start.
Why it’s useful
Think in terms of nested probability distributions: the rolling node is your local Gaussian; the session node is its parent.
VA↔VA overlap ≈ strong range boundary.
POC↔POC alignment ≈ reliable mean-reversion target.
LVNs (gaps) ≈ low-friction corridors—expect quick moves to the next node.
Quick start
Add to chart (great on 5–10s, 15–60s, 1–5m).
Start with: bins = 240, vaPct = 0.68, barsBack = 60.
Watch for:
First test & rejection at overlapping VALs/VAHs → fade back toward POC.
Acceptance beyond VA (several closes + growing outer-bin mass) → traverse to the next node.
Inputs (detailed)
General
Lookback Bars (Rolling)
Count of most-recent bars for the rolling/local histogram. Larger = smoother node that shifts slower; smaller = more reactive, “breathing” profile.
• Typical: 40–80 on 5–10s charts; 60–120 on 1–5m.
• If you increase this but keep Number of Bins fixed, each bin aggregates more volume (coarser bins).
Number of Bins
Vertical resolution (price buckets) for both rolling and session histograms. Higher = finer detail and crisper LVNs, but more line objects (closer to platform limits).
• Typical: 120–240 on 5–10s; 80–160 on 1–5m.
• If you hit performance or object limits, reduce this first.
Value Area %
Exact central coverage for VAH/VAL around POC. Computed empirically from the histogram (no Gaussian assumption): the algorithm expands from POC outward until the chosen % is enclosed.
• Common: 0.68 (≈“1σ-like”), 0.70 for slightly wider core.
• Smaller = tighter VA (more breakout flags). Larger = wider VA (more reversion bias).
Max Local Profile Width (px)
Horizontal length (in pixels) of the rolling bars/lines and its VA/POC overlays. Visual only (does not affect calculations).
Session Settings
RTH Start/End (exchange tz)
Defines the current session anchor (Premkt=00:00, RTH=your start, AH=your end). The session histogram always measures from the most recent session start and resets at each boundary.
Session Max Span (bars, 0 = full session)
Display window for session drawings (POC/VA/Histogram).
• 0 → draw from session start → now (anchored).
• > 0 → draw N bars back → now (rolling look), while still measuring all volume since session start.
This keeps the “parent” distribution measurable while letting the display track current action.
Local (Rolling) — Visibility
Show Local Profile Bars / POC / VAH & VAL
Toggle each overlay independently. If you approach object limits, disable bars first (POC/VA lines are lighter).
Local (Rolling) — Colors & Widths
Color by Buy/Sell Dominance
Fast uptick/downtick proxy over the rolling window (close vs open):
• Buying ≥ Selling → Bullish Color (default lime).
• Selling > Buying → Bearish Color (default red).
This color drives local bars, local POC, and local VA lines.
• Disable to use fixed Bars Color / POC Color / VA Lines Color.
Bars Transparency (0–100) — alpha for the local histogram (higher = lighter).
Bars Line Width (thickness) — draw thin-line profiles or chunky blocks.
POC Line Width / VA Lines Width — overlay thickness. POC is dashed, VAH/VAL solid by design.
Session — Visibility
Show Session Profile Bars / POC / VAH & VAL
Independent toggles for the session layer.
Session — Colors & Widths
Bars/POC/VA Colors & Line Widths
Fixed palette by design (default blue). These do not change with buy/sell dominance.
• Use transparency and width to make the parent profile prominent or subtle.
• Prefer minimal? Hide session bars; keep only session VA/POC.
Reading the signals (detailed playbook)
Core definitions
POC — highest-volume bin (fair price “magnet”).
VAH/VAL — upper/lower bounds enclosing your Value Area % around POC.
Node — contiguous block of high-volume bins (acceptance).
LVN — low-volume gap between nodes (low friction path).
Rejection vs Acceptance (practical rule)
Rejection at VA edge: 0–1 closes beyond VA and no persistent growth in outer bins.
Acceptance beyond VA: ≥3 closes beyond VA and outer-bin mass grows (e.g., added volume beyond the VA edge ≥ 5–10% of node volume over the last N bars). Treat acceptance as regime change.
Confluence scores (make boundary/target quality objective)
VA overlap strength (range boundary):
C_VA = 1 − |VA_edge_local − VA_edge_session| / ATR(n)
Values near 1.0 = tight overlap (stronger boundary).
Use: if C_VA ≥ 0.6–0.8, treat as high-quality fade zone.
POC alignment (magnet quality):
C_POC = 1 − |POC_local − POC_session| / ATR(n)
Higher C_POC = greater chance a rotation completes to that fair price.
(You can estimate these by eye.)
Setups
1) Range Fade at VA Confluence (mean reversion)
Context: Local VAL/VAH near Session VAL/VAH (tight overlap), clear node, local color not screaming trend (or flips to your side).
Entry: First test & rejection at the overlapped band (wick through ok; prefer close back inside).
Stop: A tick/pip beyond the wider of the two VA edges or beyond the nearest LVN, a small buffer zone can be used to judge whether price is truly rejecting a VAL/VAH or simply probing.
Targets: T1 node mid; T2 POC (size up when C_POC is high).
Flip: If acceptance (rule above) prints, flip bias or stand down.
2) LVN Traverse (continuation)
Context: Price exits VA and enters an LVN with acceptance and growing outer-bin volume.
Entry: Aggressive—first close into LVN; Conservative—retest of the VA edge from the far side (“kiss goodbye”).
Stop: Back inside the prior VA.
Targets: Next node’s VA edge or POC (edge = faster exits; POC = fuller rotations).
Note: Flatter VA edge (shallower curvature) tends to breach more easily.
3) POC→POC Magnet Trade (rotation completion)
Context: Local POC ≈ Session POC (high C_POC).
Entry: Fade a VA touch or pullback inside node, aiming toward the shared POC.
Stop: Past the opposite VA edge or LVN beyond.
Target: The shared POC; optional runner to opposite VA if the node is broad and time-of-day is supportive.
4) Failed Break (Reversion Snap-back)
Context: Push beyond VA fails acceptance (re-enters VA, outer-bin growth stalls/shrinks).
Entry: On the re-entry close, back toward POC.
Stop/Target: Stop just beyond the failed VA; target POC, then opposite VA if momentum persists.
How to read color & shape
Local color = most recent sentiment:
Green = buying ≥ selling; Red = selling > buying (over the rolling window). Treat as context, not a standalone signal. A green local node under a blue session VAH can still be a fade if the parent says “over-valued.”
Shape tells friction:
Fat nodes → rotation-friendly (fade edges).
Sharp LVN gaps → traversal-friendly (momentum continuation).
Time-of-day intuition
Right after session anchor (e.g., RTH 09:30): Session profile is young and moves quickly—treat confluence cautiously.
Mid-session: Cleanest behavior for rotations.
Close / news: Expect more traverses and POC migrations; tighten risk or switch playbooks.
Risk & execution guidance
Use tight, mechanical stops at/just beyond VA or LVN. If you need wide stops to survive noise, your entry is late or the node is unstable.
On micro-timeframes, account for fees & slippage—aim for targets paying ≥2–3× average cost.
If acceptance prints, don’t fight it—flip, reduce size, or stand aside.
Suggested presets
Scalp (5–10s): bins 120–240, barsBack 40–80, vaPct 0.68–0.70, local bars thin (small bar width).
Intraday (1–5m): bins 80–160, barsBack 60–120, vaPct 0.68–0.75, session bars more visible for parent context.
Performance & limits
Reuses line objects to stay under TradingView’s max_lines_count.
Very large bins × multiple overlays can still hit limits—use visibility toggles (hide bars first).
Session drawings use time-based coordinates to avoid “bar index too far” errors.
Known nuances
Rolling buy/sell dominance uses a simple uptick/downtick proxy (close vs open). It’s fast and practical, but it’s not a full tape classifier.
VA boundaries are computed from the empirical histogram—no Gaussian assumption.
This script does not calculate the full daily volume profile. Several other tools already provide that, including TradingView’s built-in Volume Profile indicators. Instead, this indicator focuses on pairing a rolling, short-term volume distribution with a session-wide distribution to make ranges more explicit. It is designed to supplement your use of standard or periodic volume profiles, not replace them. Think of it as a magnifying lens that helps you see where local structure aligns with the broader session.
How to trade it (TL;DR)
Fade overlapping VA bands on first rejection → target POC.
Continue through LVN on acceptance beyond VA → target next node’s VA/POC.
Respect acceptance: ≥3 closes beyond VA + growing outer-bin volume = regime change.
FAQ
Q: Why 68% Value Area?
A: It mirrors the “~1σ” idea, but we compute it exactly from empirical volume, not by assuming a normal distribution.
Q: Why are my profiles thin lines?
A: Increase Bars Line Width for chunkier blocks; reduce for fine, thin-line profiles.
Q: Session bars don’t reach session start—why?
A: Set Session Max Span (bars) = 0 for full anchoring; any positive value draws a rolling window while still measuring from session start.
Changelog (v1.0)
Dual profiles: Rolling + Session with independent POC/VA lines.
Session anchoring (Premkt/RTH/AH) with optional rolling display span.
Dynamic coloring for the rolling profile (buying vs selling).
Fully modular toggles + per-feature colors/widths.
Thin-line rendering via bar line width.
Signal Stack MeterWhat it is
A lightweight “go or no‑go” meter that combines your manual read of Structure, Location, and Momentum with automatic context from volatility and macro timing. It surfaces a single, tradeable answer on the chart: OK to engage or Standby.
Why traders like it
You keep your discretion and nuance, and the meter adds guardrails. It prevents good trade ideas from being executed in the wrong conditions.
What it measures
Manual buckets you set each day: Structure, Location, Momentum from 0 to 2
Volatility from VIX, term structure, ATR 5 over 60, and session gaps
Time windows for CPI, NFP, and FOMC with ET inputs and an exchange‑offset
Total score and a simple gate: threshold plus a “strong bucket” rule you choose
How to use in 30 seconds
Pick a preset for your market.
Set Structure, Location, Momentum to 0, 1, or 2.
Leave defaults for the auto metrics while you get a feel.
Read the header. When it says OK to engage, you have both your read and the context.
Defaults we recommend
OK threshold: 5
Strong bucket rule: Either Structure or Location equals 2
VIX triggers: 22 and 1.25× the 20‑SMA
Term mode: Diff at 0.00 tolerance. Ratio mode at 1.00+ is available
ATR 5/60 defense: 1.25. Offense cue: 0.85 or lower
ATR smoothing: 1
Gap mode: RTH with 0.60× ATR5 wild gap. ON wild range at 0.80× ATR5
CPI window 08:25 to 08:40 ET. FOMC window 13:50 to 14:30 ET
ET to exchange offset: −60 for CME index futures. Set to 0 for NYSE symbols like SPY
Alert cadence: Once per RTH session. Snooze first 30 minutes optional
New since the last description
Parity with Defense Mode for presets, sessions, ratio vs diff term mode, ATR smoothing, RTH‑key cadence, and snooze options
Event windows in ET with a simple offset to your exchange time
Alternate row backgrounds and full color control for readability
Exposed series for automation: EngageOK(1=yes) plus TotalScore
Debug toggle to see ATR ratio, term, and gap measurements directly
Notes
Dynamic alerts require “Any alert() function call”.
The meter is designed to sit opposite Defense Mode on the chart. Use the position input to avoid overlap.
Defense Mode Dashboard ProWhat it is
A one‑look market regime dashboard for ES, NQ, YM, RTY, and SPY that tells you when to play defense, when you might have an offense cue, and when to chill. It blends VIX, VIX term structure, ATR 5 over 60, and session gap signals with clean alerts and a compact table you can park anywhere.
Why traders like it
Because it filters out the noise. Regime first, tactics second. You avoid trading size into landmines and lean in when volatility cooperates.
What it measures
Volatility stress with VIX level and VIX vs 20‑SMA
Term structure using VX1 vs VX2 with two modes
Diff mode: VX1 minus VX2
Ratio mode: VX1 divided by VX2
Realized volatility using ATR5 over ATR60 with optional smoothing
Session risk from RTH opening gaps and overnight range, normalized by ATR
How to use in 30 seconds
Pick a preset in the inputs. ES, NQ, YM, RTY, SPY are ready.
Leave thresholds at defaults to start.
Add one TradingView alert using “Any alert() function call”.
Trade smaller or stand aside when the header reads DEFENSE ON. Consider leaning in only when you see OFFENSE CUE and your playbook agrees.
Defaults we recommend
VIX triggers: 22 and 1.25× the 20‑SMA
Term mode: Diff with tolerance 0.00. Use Ratio at 1.00+ for choppier markets
ATR 5/60 defense: 1.25. Offense cue: 0.85 or lower
ATR smoothing: 1. Try 2 to 3 if you want fewer flips
Gap mode: RTH. Turn Both on if you want ON range to count too
RTH wild gap: 0.60× ATR5. ON wild range: 0.80× ATR5
Alert cadence: Once per RTH session
Snooze: Quick snooze first 30 minutes on. Fire on snooze exit off, unless you really want the catch‑up ping
New since the last description
Multi‑asset presets set symbols and RTH windows for ES, NQ, YM, RTY, SPY
Term ratio mode with near‑flat warning when ratio is between 1.00 and your trigger
ATR smoothing for the 5 over 60 ratio
RTH keying for cadence, so “Once per RTH session” behaves like a trader expects
Snooze upgrades with quick snooze tied to the first N minutes of RTH and an optional fire‑on‑snooze‑exit
Compact title merge and user color controls for labels, values, borders, and background
Exposed series for integrations: DefenseOn(1=yes) and OffenseCue(1=yes)
Debug toggle to visualize gap points, ON range, and term readings
Stronger NA handling with a clear “No core data” row when feeds are missing
Notes
Dynamic alerts require “Any alert() function call”.
Works on any chart timeframe. Daily reads and 1‑minute anchors handle the regime logic.
BUY in HASH RibbonsHash Ribbons Indicator (BUY Signal)
A TradingView Pine Script v6 implementation for identifying Bitcoin miner capitulation (“Springs”) and recovery phases based on hash rate data. It marks potential low-risk buying opportunities by tracking short- and long-term moving averages of the network hash rate.
⸻
Key Features
• Hash Rate SMAs
• Short-term SMA (default: 30 days)
• Long-term SMA (default: 60 days)
• Phase Markers
• Gray circle: Short SMA crosses below long SMA (start of capitulation)
• White circles: Ongoing capitulation, with brighter white when the short SMA turns upward
• Yellow circle: Short SMA crosses back above long SMA (end of capitulation)
• Orange circle: Buy signal once hash rate recovery aligns with bullish price momentum (10-day price SMA crosses above 20-day price SMA)
• Display Modes
• Ribbons: Plots the two SMAs as colored bands—red for capitulation, green for recovery
• Oscillator: Shows the percentage difference between SMAs as a histogram (red for negative, blue for positive)
• Optional Overlays
• Bitcoin halving dates (2012, 2016, 2020, 2024) with dashed lines and labels
• Raw hash rate data in EH/s
• Alerts
• Configurable alerts for capitulation start, recovery, and buy signals
⸻
How It Works
1. Data Source: Fetches daily hash rate values from a selected provider (e.g., IntoTheBlock, Quandl).
2. Capitulation Detection: When the 30-day SMA falls below the 60-day SMA, miners are likely capitulating.
3. Recovery Identification: A rising 30-day SMA during capitulation signals miner recovery.
4. Buy Signal: Confirmed when the hash rate recovery coincides with a bullish shift in price momentum (10-day price SMA > 20-day price SMA).
⸻
Inputs
Hash Rate Short SMA: 30 days
Hash Rate Long SMA: 60 days
Plot Signals: On
Plot Halvings: Off
Plot Raw Hash Rate: Off
⸻
Considerations
• Timeframe: Best applied on daily charts to capture meaningful miner behavior.
• Data Reliability: Ensure the chosen hash rate source provides consistent, gap-free data.
• Risk Management: Use alongside other technical indicators (e.g., RSI, MACD) and fundamental analysis.
• Backtesting: Evaluate performance over different market cycles before live deployment.
WaveTrend with CrossesWaveTrend with Crosses — Spot Golden & Dead Crosses with Precision!
WaveTrend with Crosses is a customized version of the classic WaveTrend oscillator, enhanced with clean visual signals to help you pinpoint momentum shifts through golden and dead crosses.
✅ Key Features
Momentum analysis based on WaveTrend (WT1 & WT2)
Detects Golden Cross (WT1 crosses above WT2) and
Dead Cross (WT1 crosses below WT2)
Customizable Overbought/Oversold zones (defaults: ±60, ±53)
Visual circle markers on valid crossovers for easy recognition
Built-in alert system to notify you of real-time cross signals
📊 How to Use
Add the indicator to your chart and choose your desired symbol & timeframe.
The blue shaded area shows the divergence between WT1 and WT2 — a visual cue for momentum buildup.
Circle markers:
Red circle: Dead cross — potential bearish momentum
Green circle: Golden cross — potential bullish reversal
Customize the settings to fit your personal trading strategy if needed.
🛠 User Inputs
n1, n2: Channel lengths (default: 10 and 21)
obLevel, osLevel: Overbought/Oversold thresholds (default: ±60 / ±53)
standardValue: Threshold used to validate significant crossovers (default: 60)
🔔 Alert System
Get notified with alerts like "Golden Cross" or "Dead Cross" when key crossovers occur,
helping you react quickly and confidently.
⚠️ Notes
Past performance is not indicative of future results — always backtest and use in conjunction with other tools.
Low timeframes may generate frequent signals; filtering or confirmation is recommended.
💡 Author's Note
Simple and effective — this tool is designed to focus solely on cross-based entries.
Ideal for momentum-based scalping or swing trading strategies.
Feel free to customize and tweak as needed! 😄
Simple Multi-Timeframe Trends with RSI (Realtime)Simple Multi-Timeframe Trends with RSI Realtime Updates
Overview
The Simple Multi-Timeframe Trends with RSI Realtime Updates indicator is a comprehensive dashboard designed to give you an at-a-glance understanding of market trends across nine key timeframes, from one minute (M1) to one month (M).
It moves beyond simple moving average crossovers by calculating a sophisticated Trend Score for each timeframe. This score is then intelligently combined into a single, weighted Confluence Signal , which adapts to your personal trading style. With integrated RSI and divergence detection, SMTT provides a powerful, all-in-one tool to confirm your trade ideas and stay on the right side of the market.
Key Features
Automatic Trading Presets: The most powerful feature of the script. Simply select your trading style, and the indicator will automatically adjust all internal parameters for you:
Intraday: Uses shorter moving averages and higher sensitivity, focusing on lower timeframe alignment for quick moves.
Swing Trading: A balanced preset using medium-term moving averages, ideal for capturing trends that last several days or weeks.
Investment: Uses long-term moving averages and lower sensitivity, prioritizing the major trends on high timeframes.
Advanced Trend Scoring: The trend for each timeframe isn't just "up" or "down". The score is calculated based on a combination of:
Price vs. Moving Average: Is the price above or below the MA?
MA Slope: Is the trend accelerating or decelerating? A steep slope indicates a strong trend.
Price Momentum: How quickly has the price moved recently?
Volatility Adjustment: The score's quality is adjusted based on current market volatility (using ATR) to filter out choppy conditions.
Weighted Confluence Score: The script synthesizes the trend scores from all nine timeframes into a single, actionable signal. The weights are dynamically adjusted based on your selected Trading Style , ensuring the most relevant timeframes have the most impact on the final result.
Integrated RSI & Divergence: Each timeframe includes a smoothed RSI value to help you spot overbought/oversold conditions. It also flags potential bullish (price lower, RSI higher) and bearish (price higher, RSI lower) divergences, which can be early warnings of a trend reversal.
Clean & Customizable Dashboard: The entire analysis is presented in a clean, easy-to-read table on your chart. You can choose its position and optionally display the raw numerical scores for a deeper analysis.
How to Use It
1. Add to Chart: Apply the "Simple Multi-Timeframe Trends" indicator to your chart.
2. Select Your Style: This is the most important step. Go to the indicator settings and choose the Trading Style that best fits your strategy (Intraday, Swing Trading, or Investment). All calculations will instantly adapt.
3. Analyze the Dashboard:
Look at the Trend row to see the direction and strength of the trend on individual timeframes. Strong alignment (e.g., all green or all red) indicates a powerful, market-wide move.
Check the RSI row. Is the trend overextended (RSI > 60) or is there room to run? Look for the fuchsia color, which signals a divergence and warrants caution.
Focus on the Signal row. This is your summary. A "STRONG SIGNAL" with high alignment suggests a high-probability setup. A "NEUTRAL" or "Weak" signal suggests waiting for a better opportunity.
4. Confirm Your Trades: Use the SMTT dashboard as a confirmation tool. For example, if you are looking for a long entry, wait for the dashboard to show a "BULLISH" or "STRONG SIGNAL" to confirm that the broader market structure supports your trade.
Dashboard Legend
Trend Row
This row shows the trend direction and strength for each timeframe.
⬆⬆ (Dark Green): Ultra Bullish - Very strong, established uptrend.
⬆ (Green): Strong Bullish - Confident uptrend.
▲ (Light Green): Bullish - The beginning of an uptrend or a weak uptrend.
━ (Orange): Neutral - Sideways or consolidating market.
▼ (Light Red): Bearish - The beginning of a downtrend or a weak downtrend.
⬇ (Red): Strong Bearish - Confident downtrend.
⬇⬇ (Dark Red): Ultra Bearish - Very strong, established downtrend.
RSI Row
This row displays the smoothed RSI value and its condition.
Green Text: Oversold (RSI < 40). Potential for a bounce or reversal upwards.
Red Text: Overbought (RSI > 60). Potential for a pullback or reversal downwards.
Fuchsia (Pink) Text: Divergence Detected! A potential reversal is forming.
White Text: Neutral (RSI between 40 and 60).
Signal Row
This is the final, weighted confluence of all timeframes.
Label:
🚀 STRONG SIGNAL / 💥 STRONG SIGNAL: High confluence and strong momentum.
🟢 BULLISH / 🔴 BEARISH: Clear directional bias across relevant timeframes.
🟡 Weak + / 🟠 Weak -: Minor directional bias, suggests caution.
⚪ NEUTRAL: No clear directional trend; market is likely choppy or undecided.
Numerical Score: The raw weighted confluence score. The further from zero, the stronger the signal.
Alignment %: The percentage of timeframes (out of 9) that are showing a clear bullish or bearish trend. Higher percentages indicate a more unified market.
Choppiness ZONE OverlayPurpose
This script overlays choppiness zones directly onto the price chart to help traders identify whether the market is trending or ranging. It is designed to filter out low-probability trades during high choppiness conditions.
How It Works
Calculates the Choppiness Index over a user-defined period using ATR and price range.
Divides choppiness into four zones:
30 to 40: Low choppiness, possible trend initiation, shown in yellow.
40 to 50: Moderate choppiness, transition zone, shown in orange.
50 to 60: High choppiness, weakening momentum, shown in red.
60 and above: Extreme choppiness, avoid trading, shown in purple.
Highlights each zone with customizable color fills between the high and low of the selected range.
Triggers a real-time alert when choppiness exceeds 60.
Features
Customizable choppiness zones and color settings.
Real-time alert when market becomes extremely choppy (choppiness ≥ 60).
Visual zone overlay on the price chart.
Compatible with all timeframes.
Lightweight and responsive for scalping, intraday, or swing trading.
Tip
Use this tool as a volatility or trend filter. Combine it with momentum or trend-following indicators to improve trade selection.
Kaufman Trend Strategy# ✅ Kaufman Trend Strategy – Full Description (Script Publishing Version)
**Kaufman Trend Strategy** is a dynamic trend-following strategy based on Kaufman Filter theory.
It detects real-time trend momentum, reduces noise, and aims to enhance entry accuracy while optimizing risk.
⚠️ _For educational and research purposes only. Past performance does not guarantee future results._
---
## 🎯 Strategy Objective
- Smooth price noise using Kaufman Filter smoothing
- Detect the strength and direction of trends with a normalized oscillator
- Manage profits using multi-stage take-profits and adaptive ATR stop-loss logic
---
## ✨ Key Features
- **Kaufman Filter Trend Detection**
Extracts directional signal using a state space model.
- **Multi-Stage Profit-Taking**
Automatically takes partial profits based on color changes and zero-cross events.
- **ATR-Based Volatility Stops**
Stops adjust based on swing highs/lows and current market volatility.
---
## 📊 Entry & Exit Logic
**Long Entry**
- `trend_strength ≥ 60`
- Green trend signal
- Price above the Kaufman average
**Short Entry**
- `trend_strength ≤ -60`
- Red trend signal
- Price below the Kaufman average
**Exit (Long/Short)**
- Blue trend color → TP1 (50%)
- Oscillator crosses 0 → TP2 (25%)
- Trend weakens → Final exit (25%)
- ATR + swing-based stop loss
---
## 💰 Risk Management
- Initial capital: `$3,000`
- Order size: `$100` per trade (realistic, low-risk sizing)
- Commission: `0.002%`
- Slippage: `2 ticks`
- Pyramiding: `1` max position
- Estimated risk/trade: `~0.1–0.5%` of equity
> ⚠️ _No trade risks more than 5% of equity. This strategy follows TradingView script publishing rules._
---
## ⚙️ Default Parameters
- **1st Take Profit**: 50%
- **2nd Take Profit**: 25%
- **Final Exit**: 25%
- **ATR Period**: 14
- **Swing Lookback**: 10
- **Entry Threshold**: ±60
- **Exit Threshold**: ±40
---
## 📅 Backtest Summary
- **Symbol**: USD/JPY
- **Timeframe**: 1H
- **Date Range**: Jan 3, 2022 – Jun 4, 2025
- **Trades**: 924
- **Win Rate**: 41.67%
- **Profit Factor**: 1.108
- **Net Profit**: +$1,659.29 (+54.56%)
- **Max Drawdown**: -$1,419.73 (-31.87%)
---
## ✅ Summary
This strategy uses Kaufman filtering to detect market direction with reduced lag and increased smoothness.
It’s built with visual clarity and strong trade management, making it practical for both beginners and advanced users.
---
## 📌 Disclaimer
This script is for educational and informational purposes only and should not be considered financial advice.
Use with proper risk controls and always test in a demo environment before live trading.
Enhanced Cycle IndicatorEnhanced Cycle Indicator Guide
DISCLAIMER
"This PineScript indicator evolved from a foundational algorithm designed to visualize cycle-based center average differentials. The original concept has been significantly enhanced and optimized through collaborative refinement with AI, resulting in improved functionality, performance, and visualization capabilities while maintaining the core mathematical principles of the original design"
Overview
The Enhanced Cycle Indicator is designed to identify market cycles with minimal lag while ensuring the cycle lows and highs correspond closely with actual price bottoms and tops. This indicator transforms price data into observable cycles that help you identify when a market is likely to change direction.
Core Principles
Cycle Detection: Identifies natural market rhythms using multiple timeframes
Dynamic Adaptation: Adjusts to changing market conditions for consistent performance
Precise Signals: Provides clear entry and exit points aligned with actual market turns
Reduced Lag: Uses advanced calculations to minimize delay in cycle identification
How To Use
1. Main Cycle Interpretation
Green Histogram Bars: Bullish cycle phase (upward momentum)
Red Histogram Bars: Bearish cycle phase (downward momentum)
Cycle Extremes: When the histogram reaches extreme values (+80/-80), the market is likely approaching a turning point
Zero Line: Crossovers often indicate a shift in the underlying market direction
2. Trading Signals
Green Triangle Up (bottom of chart): Strong bullish signal - ideal for entries or covering shorts
Red Triangle Down (top of chart): Strong bearish signal - ideal for exits or short entries
Diamond Shapes: Indicate divergence between price and cycle - early warning of potential reversals
Small Circles: Minor cycle turning points - useful for fine-tuning entries/exits
3. Optimal Signal Conditions
Bullish Signals Work Best When:
The cycle is deeply oversold (below -60)
RSI is below 40 or turning up
Price is near a significant low
Multiple confirmation bars have occurred
Bearish Signals Work Best When:
The cycle is heavily overbought (above +60)
RSI is above 60 or turning down
Price is near a significant high
Multiple confirmation bars have occurred
4. Parameter Adjustments
For Shorter Timeframes: Reduce cycle periods and smoothing factor for faster response
For Daily/Weekly Charts: Increase cycle periods and smoothing for smoother signals
For Volatile Markets: Reduce cycle responsiveness to filter noise
For Trending Markets: Increase signal confirmation requirement to avoid false signals
Recommended Settings
Default (All-Purpose)
Main Cycle: 50
Half Cycle: 25
Quarter Cycle: 12
Smoothing Factor: 0.5
RSI Filter: Enabled
Signal Confirmation: 2 bars
Faster Response (Day Trading)
Main Cycle: 30
Half Cycle: 15
Quarter Cycle: 8
Smoothing Factor: 0.3
Cycle Responsiveness: 1.2
Signal Confirmation: 1 bar
Smoother Signals (Swing Trading)
Main Cycle: 80
Half Cycle: 40
Quarter Cycle: 20
Smoothing Factor: 0.7
Cycle Responsiveness: 0.8
Signal Confirmation: 3 bars
Advanced Features
Adaptive Period
When enabled, the indicator automatically adjusts cycle periods based on recent price volatility. This is particularly useful in markets that alternate between trending and ranging behaviors.
Momentum Filter
Enhances cycle signals by incorporating price momentum, making signals more responsive during strong trends and less prone to whipsaws during consolidations.
RSI Filter
Adds an additional confirmation layer using RSI, helping to filter out lower-quality signals and improve overall accuracy.
Divergence Detection
Identifies situations where price makes a new high/low but the cycle doesn't confirm, often preceding significant market reversals.
Best Practices
Use the indicator in conjunction with support/resistance levels
Look for signal clusters across multiple timeframes
Reduce position size when signals appear far from cycle extremes
Pay special attention to signals that coincide with divergences
Customize cycle periods to match the natural rhythm of your traded instrument
Troubleshooting
Too Many Signals: Increase signal confirmation bars or reduce cycle responsiveness
Missing Major Turns: Decrease smoothing factor or increase cycle responsiveness
Signals Too Late: Decrease cycle periods and smoothing factor
False Signals: Enable RSI filter and increase signal confirmation requirement
Time-Based Fair Value Gaps (FVG) with Inversions (iFVG)Overview
The Time-Based Fair Value Gaps (FVG) with Inversions (iFVG) (ICT/SMT) indicator is a specialized tool designed for traders using Inner Circle Trader (ICT) methodologies. Inspired by LuxAlgo's Fair Value Gap indicator, this script introduces significant enhancements by integrating ICT principles, focusing on precise time-based FVG detection, inversion tracking, and retest signals tailored for institutional trading strategies. Unlike LuxAlgo’s general FVG approach, this indicator filters FVGs within customizable 10-minute windows aligned with ICT’s macro timeframes and incorporates ICT-specific concepts like mitigation, liquidity grabs, and session-based gap prioritization.
This tool is optimized for 1–5 minute charts, though probably best for 1 minute charts, identifying bullish and bearish FVGs, tracking their mitigation into inverted FVGs (iFVGs) as key support/resistance zones, and generating retest signals with customizable “Close” or “Wick” confirmation. Features like ATR-based filtering, optional FVG labels, mitigation removal, and session-specific FVG detection (e.g., first FVG in AM/PM sessions) make it a powerful tool for ICT traders.
Originality and Improvements
While inspired by LuxAlgo’s FVG indicator (credit to LuxAlgo for their foundational work), this script significantly extends the original concept by:
1. Time-Based FVG Detection: Unlike LuxAlgo’s continuous FVG identification, this script filters FVGs within user-defined 10-minute windows each hour (:00–:10, :10–:20, etc.), aligning with ICT’s emphasis on specific periods of institutional activity, such as hourly opens/closes or kill zones (e.g., New York 7:00–11:00 AM EST). This ensures FVGs are relevant to high-probability ICT setups.
2. Session-Specific First FVG Option: A unique feature allows traders to display only the first FVG in ICT-defined AM (9:30–10:00 AM EST) or PM (1:30–2:00 PM EST) sessions, reflecting ICT’s focus on initial market imbalances during key liquidity events.
3. ICT-Driven Mitigation and Inversion Logic: The script tracks FVG mitigation (when price closes through a gap) and converts mitigated FVGs into iFVGs, which serve as ICT-style support/resistance zones. This aligns with ICT’s view that mitigated gaps become critical reversal points, unlike LuxAlgo’s simpler gap display.
4. Customizable Retest Signals: Retest signals for iFVGs are configurable for “Close” (conservative, requiring candle body confirmation) or “Wick” (faster, using highs/lows), catering to ICT traders’ need for precise entry timing during liquidity grabs or Judas swings.
5. ATR Filtering and Mitigation Removal: An optional ATR filter ensures only significant FVGs are displayed, reducing noise, while mitigation removal declutters the chart by removing filled gaps, aligning with ICT’s principle that mitigated gaps lose relevance unless inverted.
6. Timezone and Timeframe Safeguards: A timezone offset setting aligns FVG detection with EST for ICT’s New York-centric strategies, and a timeframe warning alerts users to avoid ≥1-hour charts, ensuring accuracy in time-based filtering.
These enhancements make the script a distinct tool that builds on LuxAlgo’s foundation while offering ICT traders a tailored, high-precision solution.
How It Works
FVG Detection
FVGs are identified when a candle’s low is higher than the high of two candles prior (bullish FVG) or a candle’s high is lower than the low of two candles prior (bearish FVG). Detection is restricted to:
• User-selected 10-minute windows (e.g., :00–:10, :50–:60) to capture ICT-relevant periods like hourly transitions.
• AM/PM session first FVGs (if enabled), focusing on 9:30–10:00 AM or 1:30–2:00 PM EST for key market opens.
An optional ATR filter (default: 0.25× ATR) ensures only gaps larger than the threshold are displayed, prioritizing significant imbalances.
Mitigation and Inversion
When price closes through an FVG (e.g., below a bullish FVG’s bottom), the FVG is mitigated and becomes an iFVG, plotted as a support/resistance zone. iFVGs are critical in ICT for identifying reversal points where institutional orders accumulate.
Retest Signals
The script generates signals when price retests an iFVG:
• Close: Triggers when the candle body confirms the retest (conservative, lower noise).
• Wick: Triggers when the candle’s high/low touches the iFVG (faster, higher sensitivity). Signals are visualized with triangular markers (▲ for bullish, ▼ for bearish) and can trigger alerts.
Visualization
• FVGs: Displayed as colored boxes (green for bullish, red for bearish) with optional “Bull FVG”/“Bear FVG” labels.
• iFVGs: Shown as extended boxes with dashed midlines, limited to the user-defined number of recent zones (default: 5).
• Mitigation Removal: Mitigated FVGs/iFVGs are removed (if enabled) to keep the chart clean.
How to Use
Recommended Settings
• Timeframe: Use 1–5 minute charts for precision, avoiding ≥1-hour timeframes (a warning label appears if misconfigured).
• Time Windows: Enable :00–:10 and :50–:60 for hourly open/close FVGs, or use the “Show only 1st presented FVG” option for AM/PM session focus.
• ATR Filter: Keep enabled (multiplier 0.25–0.5) for significant gaps; disable on 1-minute charts for more FVGs during volatility.
• Signal Preference: Use “Close” for conservative entries, “Wick” for aggressive setups.
• Timezone Offset: Set to -5 for EST (or -4 for EDT) to align with ICT’s New York session.
Trading Strategy
1. Macro Timeframes: Focus on New York (7:00–11:00 AM EST) or London (2:00–5:00 AM EST) kill zones for high institutional activity.
2. FVG Entries: Trade bullish FVGs as support in uptrends or bearish FVGs as resistance in downtrends, especially in :00–:10 or :50–:60 windows.
3. iFVG Retests: Enter on retest signals (▲/▼) during liquidity grabs or Judas swings, using “Close” for confirmation or “Wick” for speed.
4. Session FVGs: Use the “Show only 1st presented FVG” option to target the first gap in AM/PM sessions, often tied to ICT’s market maker algorithms.
5. Risk Management: Combine with ICT concepts like order blocks or breaker blocks for confluence, and set stops beyond FVG/iFVG boundaries.
Alerts
Set alerts for:
• “Bullish FVG Detected”/“Bearish FVG Detected”: New FVGs in selected windows.
• “Bullish Signal”/“Bearish Signal”: iFVG retest confirmations.
Settings Description
• Show Last (1–100, default: 5): Number of recent iFVGs to display. Lower values reduce clutter.
• Show only 1st presented FVG : Limits FVGs to the first in 9:30–10:00 AM or 1:30–2:00 PM EST sessions (overrides time window checkboxes).
• Time Window Checkboxes: Enable/disable FVG detection in 10-minute windows (:00–:10, :10–:20, etc.). All enabled by default.
• Signal Preference: “Close” (default) or “Wick” for iFVG retest signals.
• Use ATR Filter: Enables ATR-based size filtering (default: true).
• ATR Multiplier (0–∞, default: 0.25): Sets FVG size threshold (higher values = larger gaps).
• Remove Mitigated FVGs: Removes filled FVGs/iFVGs (default: true).
• Show FVG Labels: Displays “Bull FVG”/“Bear FVG” labels (default: true).
• Timezone Offset (-12 to 12, default: -5): Aligns time windows with EST.
• Colors: Customize bullish (green), bearish (red), and midline (gray) colors.
Why Use This Indicator?
This indicator empowers ICT traders with a tool that goes beyond generic FVG detection, offering precise, time-filtered gaps and inversion tracking aligned with institutional trading principles. By focusing on ICT’s macro timeframes, session-specific imbalances, and customizable signal logic, it provides a clear edge for scalping, swing trading, or reversal setups in high-liquidity markets.
