立即開始

在腳本中搜尋"股价站上60月线"

RSI / Stoch / SRSI / MFI / Aroon Overlay [SigmaDraconis]Combines 4 popular indicators (RSI, Stoch, SRSI, MFI) and 1 peculiar one (Aroon) in 1 for those who want to save indicators but not only. This is an evolution of my (simpler) "RSI / Stoch / Stoch RSI (SRSI) Overlay " that you can find on my scripts. Added bands for oversold/overbought areas (70/30 common for RSI and 80/20 for SRSI and MFI), as well as a middle 50 horizontal line. Neutral bands around 55-45 added as well that can be hidden for less clutter. I also recommend a more transparent coloring for these since Pine script doesn't allow default transparency for horizontal lines. By default only RSI and Stoch are activated, you can activate Aroon, MFI and SRSI on the inputs window. Some extra notes: * RSI, Stoch and MFI can help to strengthen one's decision as well as Aroon to predict a possible trend reversal, SRSI can show when RSI has high probability of being topped or bottomed when oversold/overbought but don't forget to look at volume and how the trend progresses that can keep SRSI above 80 or below 20 while RSI and price continues to trend, divergences are most helpful here to find possible reversal areas. * This chart depicts some interesting divergences, as well as Stoch tops and bottoms and confluences between RSI/MFI and Stoch on some over-extended tops and bottoms that shown being good reversal zones. RSI resistances are shown as well, failing to break above 60 or the neutral zone (this is a bearish BTC trend chart after all) or failing to gain support to break up certain levels (RSI notes a more bullish trend when consistently above 60 and more bearish below 40). If you like it and use it to profit, please tip me below :) Tip jars: BTC: 15nMBiEGVrdGcu9C1h6QRcTNRvugHkqrMQ ETH: 0xC33845946c48B61fBCbEA0367ec2238CaF2b73bc BTS: sigma-draconis
Pine Script®指標
由SigmaDraconis提供
37
Chop and explodeThe purpose of this script is to decipher chop zones from runs/movement/explosion The chop is RSI movement between 40 and 60 tight chop is RSI movement between 45 and 55. There should be an explosion after RSI breaks through 60 (long) or 40 (short). Tight chop bars are colored black, a series of black bars is tight consolidation and should explode imminently. The longer the chop the longer the explosion will go for. tighter the better. Loose chop (whip saw/yellow bars) will range between 40 and 60. the move begins with blue bars for long and purple bars for short. Couple it with your trading system to help stay out of chop and enter when there is movement. Use with "Simple Trender." Best of luck in all you do. Get money.
Pine Script®指標
由NYBKLYN提供
61
Build A BotThis is the Robot we built during the 60 Minute Build-A-Bot webinar on September 12, 2018. We had a great time, and a lot of participation and the best part was that we finished up this robot and even ran a backtest in exactly 60 minutes! We built this robot based on recommendations and suggestions from those who were attending live. Lots of pieces in this robot, but you can always tinker with it, remove stuff, add things, whatever you want! This version uses the CCI as a trigger for trade entry. The other version uses the Hull Moving Average as a trigger for trade entry.
Pine Script®策略
由wesandsara08提供
Volume Zone Oscillator and Price Zone (VZO/PZO) [NeoButane]" Volume Precedes Price is the conceptual idea for the oscillator." "The main idea of the VZO was to try to change the OBV to look like an oscillator rather than an indicator, also to include time; primarily to identify which zone the volume is located in during a specific period " How to read this indicator: Positive reading -> bullish Negative reading -> bearish -60 or 60 is seen as the limit of the oscillator range, and a pullback should be expected from there. Plus and minus signs have been added to the top and bottom for VZO and PZO, with an adjustable threshold to trigger. Alert conditions have been added to this indicator for ease of use. Volume Zone Oscillator, write-up by the author (recommended reading) http:capitalsynergy.com/resources/IFTA09VZO.pdf Volume Zone Oscillator, uses and formula https:www.investopedia.com/articles/active-trading/072815/how-interpret-volume-zone-oscillator.asp Price Zone Oscillator, uses and formula https:www.investopedia.com/terms/p/price-zone-oscillator.asp
Pine Script®指標
由NeoButane提供
13
Fib,Guppy Multiple MA(FGMMA)(A/D & Volume Weight,SMA,EMA)[cI8DH]Features: - 3 + 12 MAs (12 is chosen because Guppy has 12 MAs) - MA types can be set to Simple, Exponential, Weighted, and Smoothed - Volume weight can be applied to all available MAs (the built-in VWMA uses Simple MA) - It is possible to count in only effective portions of the volume in the equation by using Accum/Dist Volume Weight - Secondary smoothing (useful when volume weight is enabled) - Predefined MA sets based on Fibonacci sequence (2,3,5,8,.., 377), Guppy (3,5,8,10,12,15 &30,35,40,45,50,60), and cI8DH (2,3,5,8,12,17 & 30,34,39,45,52,60) Recommended settings: - hlc3 as input source captures all the essential information encapsulated in a candle. I'd use hlc3 as the default option. In uptrend, "low" and in downtrend, "high" might give more relevant results when using MAs for structural analysis of a market. For commonly used MAs (EMA20, SMA50,100,200), "close" should be used due to their self-fulfilling prophecy effect. - When you have volume weight above 0, you may want to use secondary smoothing. - Try not to use Simple MA for smaller lengths (below 20). Sharp changes in the past (right before the period specified by the length) will affect the current value of MA dramatically leading to confusion. - I am using the first 3 MAs for SMA 50,100,200. You can disable them from the MA type selector all at once when using Fib or Guppy ribbons. MA-based analysis: There are different ways of structuring a market. Geometrical (trend lines, channels, fans, patterns, etc) and Fib retracement-based structuring is very common among traders. MAs give an alternative way of analyzing markets. MA ribbons such as Guppy (6 slow and 6 fast-moving MAs) are popular for analyzing market flow. IMO default Guppy sets are a bit random as the numbers do not have an elegant sequence. So I proposed my sets based on increasing sequene spacing (+1). These two MA ribbons are good for market flow analysis but the spacing of the MAs are not ideal for structuring a market. Ribbons based on the Fib sequence is a better choice for structuring a market. This is the equivalent of Fib channels but in a more dynamic form. Among other things, MA Fib ribbon can be used to assess market momentum and to compare different stages of a market. Here are two "educational-only" examples: Notes: - Smoothed MA with length L = Exponential MA with length 2*L-1 - Read the background section in my ADP indicator to understand how A/D Volume is calculated
Pine Script®指標
由cI8DH提供
11
Better RSI with bullish / bearish market cycle indicator This script improves the default RSI. First. it identifies regions of the RSI which are oversold and overbought by changing the color of RSI from white to red. Second, it adds additional reference lines at 20,40,50,60, and 80 to better gauge the RSI value. Finally, the coolest feature, the middle 50 line is used to indicate which cycle the price is currently at. A green color at the 50 line indicates a bullish cycle, a red color indicators a bearish cycle, and a white color indicates a neutral cycle. The cycles are determined using the RSI as follows: if RSI is overbought, cycle switches to bullish until RSI falls below 40, at which point it becomes neutral if RSI is oversold, cycle switches bearish until RSI rises above 60, at which point it becomes neutral a neutral cycle is exited at either overbought or oversold conditions Very useful, please give it a try and let me know what you think
Pine Script®指標
由TradeCalmly提供
19
MG - Multiple time frame Stochastic RSIAllows user to view stochastic RSI from two different time frames. Each stochastic RSI indicator is fully customizable, offering the following options: - Timeframe - RSI source - RSI length - Stochastic length - Stochastic average length - Stochastic smoothing length Usage: Comparing stochastic RSI across two different time frames can sharpen trades. For example, if you configure a 60 min and 5/15 min stochastic RSI pair, you might enter a long trade when the 60 min stoch RSI crosses up and exit / take profit when the 5 min stock RSI crosses down.
Pine Script®指標
由mgibson91提供
1
NG [Simple Harmonic Oscillator]The SHO is a bounded oscillator for the simple harmonic index that calculates the period of the market’s cycle. The oscillator is used for short and intermediate terms and moves within a range of -100 to 100 percent. The SHO has overbought and oversold levels at +40 and -40, respectively. At extreme periods, the oscillator may reach the levels of +60 and -60. The zero level demonstrates an equilibrium between the periods of bulls and bears. The SHO oscillates between +40 and -40. The crossover at those levels creates buy and sell signals. In an uptrend, the SHO fluctuates between 0 and +40 where the bulls are controlling the market. On the contrary, the SHO fluctuates between 0 and -40 during downtrends where the bears controlthe market. Reaching the extreme level -60 in an uptrend is a sign of weakness.
Pine Script®指標
由NGBaltic提供
2
DEMA Double Exponential Moving Average Strategy@Moneros 2017 Based on The DEMA is a fast-acting moving average that is more responsive to market changes than a traditional moving average en.wikipedia.org !!!! IN ORDER TO AVOID REPAITING ISSUES !!!! !!!! DO NOT VIEW IN LOWER RESOLUTIONS THAN res/2 PARAMETER !!!! for example res = 120 view >= 60m res = 60 view >= 30m the length of the DEMA sampling shouldn't be longer than a candle Best profits tested on BTCUSD res = 105 slowPeriod = 2 fastPeriod = 32 res = 125 slowPeriod = 3 fastPeriod = 21 res = 120 slowPeriod = 2 fastPeriod = 32 res = 130 slowPeriod = 1 fastPeriod = 24 res = 40 slowPeriod = 4 fastPeriod = 93 res = 60 slowPeriod = 1 fastPeriod = 67 BTCUSD
Pine Script®策略
由moneros提供
29
Hersheys CoCo VolumeCoCo Volume shows you volume movement of your symbol after subtracting the movement from another symbol, preferrably the sector or market the stock belongs to. My latest update to my CoCoVolume Indicator. It calculates today's volume percent over the 60 period average for both your symbol and index, and displays that difference. If the percent is over the max it highlights the color, showing BIG action for that stock. The last version was calculating the percent volume difference from yesterday to today for the stock and index and displaying the difference. The prior method had large swings on low volume stocks... this one shows the independent volume action much better. The default values will suit most stocks. You can set three variables... - the index symbol, default is SPY - the period for averaging, default is 60 - the max volume percent, default is 500 Good trading! Brian Hershey
Pine Script®指標
由bnh提供
1
close-hl2 Price actionStill not tested, but looks very good ; it is the difference between EMA median price and EMA close in different time frame, I used 240, 60, and the current Time frame ,plus one more customed period ; can forcast the price movement , but it s not in scale, so it can not show how much higher or lower the price can goes but just the next direction. I think intraday on 5 ,15 ,60 better then high frame.If you need to try on Daily frame have to change the period to higher then Daily
Pine Script®指標
由MarcoValente提供
3
Everyday 0002 _ MAC 1st Trading Hour WalkoverThis is the second strategy for my Everyday project. Like I wrote the last time - my goal is to create a new strategy everyday for the rest of 2016 and post it here on TradingView. I'm a complete beginner so this is my way of learning about coding strategies. I'll give myself between 15 minutes and 2 hours to complete each creation. This is basically a repetition of the first strategy I wrote - a Moving Average Crossover, but I added a tiny thing. I read that "Statistics have proven that the daily high or low is established within the first hour of trading on more than 70% of the time." (source: ) My first Moving Average Crossover strategy, tested on VOLVB daily, got stoped out by the volatility and because of this missed one nice bull run and a very nice bear run. So I added this single line: if time("60", "1000-1600") regarding when to take exits: if time("60", "1000-1600") strategy.exit("Close Long", "Long", profit=2000, loss=500) strategy.exit("Close Short", "Short", profit=2000, loss=500) Sweden is UTC+2 so I guess UTC 1000 equals 12.00 in Stockholm. Not sure if this is correct, actually. Anyway, I hope this means the strategy will only take exits based on price action which occur in the afternoon, when there is a higher probability of a lower volatility. When I ran the new modified strategy on the same VOLVB daily it didn't get stoped out so easily. On the other hand I'll have to test this on various stocks . Reading and learning about how to properly test strategies is on my todo list - all tips on youtube videos or blogs to read on this topic is very welcome! Like I said the last time, I'm posting these strategies hoping to learn from the community - so any feedback, advice, or corrections is very much welcome and appreciated! /pbergden
Pine Script®策略
由pbergden提供
Previous candle - D-T.R.A.D.I.N.G//@version=6 indicator("Previous candle - byDen (Body % line & Wick size) ", overlay=true, max_boxes_count=200, max_lines_count=200, max_labels_count=200) // ---------------- Inputs ---------------- showHighLow = input.bool(true, "Show High/Low lines") showHLBox = input.bool(true, "Show High-Low Box (full range)") showMidLine = input.bool(true, "Show Middle Line") showCloseLine = input.bool(true, "Show Close Line") showBodyPct = input.bool(true, "Show Body % Line") enableWickBox = input.bool(true, "Show Wick-Body Box (previous candle)") keepLastWick = input.bool(false, "Keep last Wick-Box when disabled") bodyPct = input.float(25.0, "Body % Level", step=0.1, minval=0.0, maxval=100.0) // colors / styles cHighLow = input.color(color.white, "H/L Line Color") hlStyleStr = input.string("solid", "H/L Style", options= ) hlWidth = input.int(1, "H/L Width", minval=1, maxval=5) cMid = input.color(color.yellow, "Mid Line Color") midStyleStr = input.string("dashed", "Mid Style", options= ) midWidth = input.int(1, "Mid Width", minval=1, maxval=5) cClose = input.color(color.yellow, "Close Line Color") closeStyleStr = input.string("dotted", "Close Style", options= ) closeWidth = input.int(1, "Close Width", minval=1, maxval=5) cBoxBorder = input.color(color.red, "HL Box Border") cBoxFill = color.new(input.color(color.gray, "HL Box Fill"), 85) cBullBox = color.new(input.color(color.green, "Bull WickBox"), 80) cBearBox = color.new(input.color(color.red, "Bear WickBox"), 80) cWboxBorder = input.color(color.white, "WickBox Border") cBodyPct = input.color(color.blue, "Body % Line Color") bodyPctStyle = input.string("dashed", "Body % Line Style", options= ) bodyPctWidth = input.int(1, "Body % Line Width", minval=1, maxval=5) // table colors / pip size cPipBox = input.color(color.new(color.blue, 80), "Table Background Color") cPipText = input.color(color.white, "Table Text Color") pipSize = input.float(0.1, "Pip size (XAUUSD=0.1)", step=0.01) wickLabelText = input.string("Wick", "Opis za wick") bodyLabelText = input.string("H/L-Body%", "Opis za H/L-Body%") descFontSizeStr = input.string("small", "Table Description Font Size", options= ) valFontSizeStr = input.string("normal", "Table Value Font Size", options= ) // custom texts for line labels txtHigh = input.string("High", "Label Text - High") txtLow = input.string("Low", "Label Text - Low") txtMid = input.string("Mid", "Label Text - Mid") txtClose = input.string("Close", "Label Text - Close") txtBody = input.string("Body%", "Label Text - Body %") lineFontSizeStr = input.string("small", "Line Label Font Size", options= ) lineLabelPos = input.string("above", "Line Label Position", options= ) lineLabelAlign = input.string("center", "Line Label Align", options= ) // ---------------- Candle Display Options ---------------- highDisplay = input.string("Both", "High Line Display", options= ) lowDisplay = input.string("Both", "Low Line Display", options= ) midDisplay = input.string("Both", "Mid Line Display", options= ) closeDisplay = input.string("Both", "Close Line Display", options= ) bodyDisplay = input.string("Both", "Body % Line Display", options= ) hlBoxDisplay = input.string("Both", "HL Box Display", options= ) wickBoxDisplay = input.string("Both", "Wick Box Display", options= ) // timeframe filter enabledTFs = input.string("1,5,15,30,60,240,D", "Enable on timeframes") // ---------------- Helpers ---------------- is_tf_enabled(tfStr) => str.contains("," + enabledTFs + ",", "," + tfStr + ",") line_style_from_str(s) => s == "dotted" ? line.style_dotted : s == "dashed" ? line.style_dashed : line.style_solid get_font_size(fs) => fs == "tiny" ? size.tiny : fs == "small" ? size.small : fs == "large" ? size.large : fs == "huge" ? size.huge : size.normal get_label_style(a) => a == "left" ? label.style_label_left : a == "right" ? label.style_label_right : label.style_label_center get_y_pos(basePrice, pos) => pos == "above" ? basePrice + (syminfo.mintick * 10) : basePrice - (syminfo.mintick * 10) // ---------------- Data ---------------- tf = timeframe.period = request.security(syminfo.tickerid, tf, , lookahead=barmerge.lookahead_off) midLevel = (prevH + prevL) / 2 isBull = prevC > prevO // ---------------- Persistent ---------------- var line lHigh = na var line lLow = na var line lMid = na var line lClose = na var line lBodyPct = na var box bHL = na var box wickBox = na var table wickTable = na var label labHigh = na var label labLow = na var label labMid = na var label labClose = na var label labBodyPct = na offsetBars = input.int(20, "Bars right", minval=1, maxval=500) leftX_base = bar_index rightX_base = bar_index + offsetBars if na(wickTable) wickTable := table.new(position.bottom_right, 2, 2, border_width=1, frame_color=color.white) // ---------------- DRAW ---------------- if barstate.isconfirmed and is_tf_enabled(tf) // delete previous labels if not na(labHigh) label.delete(labHigh) labHigh := na if not na(labLow) label.delete(labLow) labLow := na if not na(labMid) label.delete(labMid) labMid := na if not na(labClose) label.delete(labClose) labClose := na if not na(labBodyPct) label.delete(labBodyPct) labBodyPct := na // --- DRAW HIGH --- drawHigh = (highDisplay=="Both") or (highDisplay=="Bullish" and isBull) or (highDisplay=="Bearish" and not isBull) if showHighLow and drawHigh if not na(lHigh) line.delete(lHigh) lHigh := line.new(leftX_base, prevH, rightX_base, prevH, xloc=xloc.bar_index, color=cHighLow, width=hlWidth, style=line_style_from_str(hlStyleStr)) labHigh := label.new(rightX_base, get_y_pos(prevH,lineLabelPos), txtHigh, xloc=xloc.bar_index, yloc=yloc.price, style=get_label_style(lineLabelAlign), textcolor=cHighLow, size=get_font_size(lineFontSizeStr)) // --- DRAW LOW --- drawLow = (lowDisplay=="Both") or (lowDisplay=="Bullish" and isBull) or (lowDisplay=="Bearish" and not isBull) if showHighLow and drawLow if not na(lLow) line.delete(lLow) lLow := line.new(leftX_base, prevL, rightX_base, prevL, xloc=xloc.bar_index, color=cHighLow, width=hlWidth, style=line_style_from_str(hlStyleStr)) labLow := label.new(rightX_base, get_y_pos(prevL,lineLabelPos), txtLow, xloc=xloc.bar_index, yloc=yloc.price, style=get_label_style(lineLabelAlign), textcolor=cHighLow, size=get_font_size(lineFontSizeStr)) // --- DRAW MID --- drawMid = (midDisplay=="Both") or (midDisplay=="Bullish" and isBull) or (midDisplay=="Bearish" and not isBull) if showMidLine and drawMid if not na(lMid) line.delete(lMid) lMid := line.new(leftX_base, midLevel, rightX_base, midLevel, xloc=xloc.bar_index, color=cMid, width=midWidth, style=line_style_from_str(midStyleStr)) labMid := label.new(rightX_base, get_y_pos(midLevel,lineLabelPos), txtMid, xloc=xloc.bar_index, yloc=yloc.price, style=get_label_style(lineLabelAlign), textcolor=cMid, size=get_font_size(lineFontSizeStr)) // --- DRAW CLOSE --- drawClose = (closeDisplay=="Both") or (closeDisplay=="Bullish" and isBull) or (closeDisplay=="Bearish" and not isBull) if showCloseLine and drawClose if not na(lClose) line.delete(lClose) lClose := line.new(leftX_base, prevC, rightX_base, prevC, xloc=xloc.bar_index, color=cClose, width=closeWidth, style=line_style_from_str(closeStyleStr)) labClose := label.new(rightX_base, get_y_pos(prevC,lineLabelPos), txtClose, xloc=xloc.bar_index, yloc=yloc.price, style=get_label_style(lineLabelAlign), textcolor=cClose, size=get_font_size(lineFontSizeStr)) // --- DRAW BODY% --- float bodySize = math.abs(prevC-prevO) float levelPct = na drawBody = (bodyDisplay=="Both") or (bodyDisplay=="Bullish" and isBull) or (bodyDisplay=="Bearish" and not isBull) if showBodyPct and bodySize>0 and drawBody if not na(lBodyPct) line.delete(lBodyPct) levelPct := isBull ? (prevC - (bodyPct/100)*bodySize) : (prevC + (bodyPct/100)*bodySize) lBodyPct := line.new(leftX_base, levelPct, rightX_base, levelPct, xloc=xloc.bar_index, color=cBodyPct, width=bodyPctWidth, style=line_style_from_str(bodyPctStyle)) labBodyPct := label.new(rightX_base, get_y_pos(levelPct,lineLabelPos), txtBody, xloc=xloc.bar_index, yloc=yloc.price, style=get_label_style(lineLabelAlign), textcolor=cBodyPct, size=get_font_size(lineFontSizeStr)) // --- BOXES --- drawHLBox = (hlBoxDisplay=="Both") or (hlBoxDisplay=="Bullish" and isBull) or (hlBoxDisplay=="Bearish" and not isBull) if showHLBox and drawHLBox if not na(bHL) box.delete(bHL) bHL := box.new(leftX_base, prevH, rightX_base, prevL, xloc=xloc.bar_index, border_color=cBoxBorder, bgcolor=cBoxFill) drawWickBox = (wickBoxDisplay=="Both") or (wickBoxDisplay=="Bullish" and isBull) or (wickBoxDisplay=="Bearish" and not isBull) if enableWickBox and drawWickBox float topP = isBull ? prevH : prevC float botP = isBull ? prevC : prevL if not na(topP) and not na(botP) if not na(wickBox) box.delete(wickBox) wickBox := box.new(leftX_base, topP, rightX_base, botP, xloc=xloc.bar_index, border_color=cWboxBorder, bgcolor=(isBull?cBullBox:cBearBox)) else if not enableWickBox and not keepLastWick and not na(wickBox) box.delete(wickBox) wickBox := na // --- TABLE (vedno na obeh) --- float wickPips = isBull ? prevH-prevC : prevC-prevL float bodyPips = na if not na(levelPct) bodyPips := isBull ? math.round((prevH-levelPct)/pipSize) : math.round((levelPct-prevL)/pipSize) table.cell(wickTable, 0, 0, wickLabelText, text_color=cPipText, bgcolor=cPipBox, text_size=get_font_size(descFontSizeStr)) table.cell(wickTable, 1, 0, str.tostring(wickPips/pipSize), text_color=cPipText, bgcolor=cPipBox, text_size=get_font_size(valFontSizeStr)) if not na(bodyPips) table.cell(wickTable, 0, 1, bodyLabelText, text_color=cPipText, bgcolor=cPipBox, text_size=get_font_size(descFontSizeStr)) table.cell(wickTable, 1, 1, str.tostring(bodyPips), text_color=cPipText, bgcolor=cPipBox, text_size=get_font_size(valFontSizeStr))
Pine Script®指標
由denko93提供
Previous candle - byDen (Body % line & Wick size) //@version=6 indicator("Previous candle - byDen (Body % line & Wick size) ", overlay=true, max_boxes_count=200, max_lines_count=200, max_labels_count=200) // ---------------- Inputs ---------------- showHighLow = input.bool(true, "Show High/Low lines") showHLBox = input.bool(true, "Show High-Low Box (full range)") showMidLine = input.bool(true, "Show Middle Line") showCloseLine = input.bool(true, "Show Close Line") showBodyPct = input.bool(true, "Show Body % Line") enableWickBox = input.bool(true, "Show Wick-Body Box (previous candle)") keepLastWick = input.bool(false, "Keep last Wick-Box when disabled") bodyPct = input.float(25.0, "Body % Level", step=0.1, minval=0.0, maxval=100.0) // colors / styles cHighLow = input.color(color.white, "H/L Line Color") hlStyleStr = input.string("solid", "H/L Style", options= ) hlWidth = input.int(1, "H/L Width", minval=1, maxval=5) cMid = input.color(color.yellow, "Mid Line Color") midStyleStr = input.string("dashed", "Mid Style", options= ) midWidth = input.int(1, "Mid Width", minval=1, maxval=5) cClose = input.color(color.yellow, "Close Line Color") closeStyleStr = input.string("dotted", "Close Style", options= ) closeWidth = input.int(1, "Close Width", minval=1, maxval=5) cBoxBorder = input.color(color.red, "HL Box Border") cBoxFill = color.new(input.color(color.gray, "HL Box Fill"), 85) cBullBox = color.new(input.color(color.green, "Bull WickBox"), 80) cBearBox = color.new(input.color(color.red, "Bear WickBox"), 80) cWboxBorder = input.color(color.white, "WickBox Border") cBodyPct = input.color(color.blue, "Body % Line Color") bodyPctStyle = input.string("dashed", "Body % Line Style", options= ) bodyPctWidth = input.int(1, "Body % Line Width", minval=1, maxval=5) // wick label cPipBox = input.color(color.new(color.blue, 80), "Wick Box Color") cPipText = input.color(color.white, "Wick Text Color") pipSize = input.float(0.1, "Pip size (XAUUSD=0.1)", step=0.01) // Label settings showLabels = input.bool(true, "Show Line Labels") labelAbove = input.bool(true, "Labels Above Line?") fontSizeStr = input.string("normal", "Label Font Size", options= ) labelAlignX = input.string("center", "Label Alignment", options= ) // custom texts for labels txtHigh = input.string("High", "Label Text - High") txtLow = input.string("Low", "Label Text - Low") txtMid = input.string("Mid", "Label Text - Mid") txtClose = input.string("Close", "Label Text - Close") txtBody = input.string("Body %", "Label Text - Body %") // Wick pips font size (same options) wickFontSizeStr = input.string("normal", "Wick Pips Font Size", options= ) // timeframe filter enabledTFs = input.string("1,5,15,30,60,240,D", "Enable on timeframes") // ---------------- Helpers ---------------- is_tf_enabled(tfStr) => str.contains("," + enabledTFs + ",", "," + tfStr + ",") line_style_from_str(s) => s == "dotted" ? line.style_dotted : s == "dashed" ? line.style_dashed : line.style_solid get_label_style(_align) => _align == "left" ? label.style_label_left : _align == "right" ? label.style_label_right : label.style_label_center get_font_size(fs) => if fs == "tiny" size.tiny else if fs == "small" size.small else if fs == "large" size.large else if fs == "huge" size.huge else size.normal // ---------------- Data ---------------- tf = timeframe.period = request.security(syminfo.tickerid, tf, , lookahead=barmerge.lookahead_off) midLevel = (prevH + prevL) / 2 isBull = prevC > prevO // ---------------- Persistent ---------------- var line lHigh = na var line lLow = na var line lMid = na var line lClose = na var line lBodyPct = na var box bHL = na var box wickBox = na var table wickTable = na // labels var label labHigh = na var label labLow = na var label labMid = na var label labClose = na var label labBody = na offsetBars = input.int(20, "Bars right", minval=1, maxval=500) leftX_base = bar_index rightX_base = bar_index + offsetBars if na(wickTable) wickTable := table.new(position.bottom_right, 1, 1, border_width=1, frame_color=color.white) // ---------------- DRAW ---------------- if barstate.isconfirmed and is_tf_enabled(tf) // clean old labels if not na(labHigh) label.delete(labHigh) if not na(labLow) label.delete(labLow) if not na(labMid) label.delete(labMid) if not na(labClose) label.delete(labClose) if not na(labBody) label.delete(labBody) // style for labels labStyle = get_label_style(labelAlignX) labSize = get_font_size(fontSizeStr) wickSize = get_font_size(wickFontSizeStr) yOffset = labelAbove ? 1 : -1 if showHighLow if not na(lHigh) line.delete(lHigh) if not na(lLow) line.delete(lLow) lHigh := line.new(leftX_base, prevH, rightX_base, prevH, xloc=xloc.bar_index, color=cHighLow, width=hlWidth, style=line_style_from_str(hlStyleStr)) lLow := line.new(leftX_base, prevL, rightX_base, prevL, xloc=xloc.bar_index, color=cHighLow, width=hlWidth, style=line_style_from_str(hlStyleStr)) if showLabels labHigh := label.new(rightX_base, prevH + yOffset*syminfo.mintick, txtHigh, xloc=xloc.bar_index, yloc=yloc.price, style=labStyle, textcolor=cHighLow, size=labSize) labLow := label.new(rightX_base, prevL + yOffset*syminfo.mintick, txtLow, xloc=xloc.bar_index, yloc=yloc.price, style=labStyle, textcolor=cHighLow, size=labSize) if showMidLine if not na(lMid) line.delete(lMid) lMid := line.new(leftX_base, midLevel, rightX_base, midLevel, xloc=xloc.bar_index, color=cMid, width=midWidth, style=line_style_from_str(midStyleStr)) if showLabels labMid := label.new(rightX_base, midLevel + yOffset*syminfo.mintick, txtMid, xloc=xloc.bar_index, yloc=yloc.price, style=labStyle, textcolor=cMid, size=labSize) if showCloseLine if not na(lClose) line.delete(lClose) lClose := line.new(leftX_base, prevC, rightX_base, prevC, xloc=xloc.bar_index, color=cClose, width=closeWidth, style=line_style_from_str(closeStyleStr)) if showLabels labClose := label.new(rightX_base, prevC + yOffset*syminfo.mintick, txtClose, xloc=xloc.bar_index, yloc=yloc.price, style=labStyle, textcolor=cClose, size=labSize) if showBodyPct if not na(lBodyPct) line.delete(lBodyPct) float bodySize = math.abs(prevC - prevO) if bodySize > 0 float levelPct = isBull ? (prevC - (bodyPct/100.0) * bodySize) : (prevC + (bodyPct/100.0) * bodySize) lBodyPct := line.new(leftX_base, levelPct, rightX_base, levelPct, xloc=xloc.bar_index, color=cBodyPct, width=bodyPctWidth, style=line_style_from_str(bodyPctStyle)) if showLabels labBody := label.new(rightX_base, levelPct + yOffset*syminfo.mintick, txtBody + " " + str.tostring(bodyPct), xloc=xloc.bar_index, yloc=yloc.price, style=labStyle, textcolor=cBodyPct, size=labSize) if showHLBox if not na(bHL) box.delete(bHL) bHL := box.new(leftX_base, prevH, rightX_base, prevL, xloc=xloc.bar_index, border_color=cBoxBorder, bgcolor=cBoxFill) if not enableWickBox if not na(wickBox) and not keepLastWick box.delete(wickBox) wickBox := na else float topP = isBull ? prevH : prevC float botP = isBull ? prevC : prevL if not na(topP) and not na(botP) if not na(wickBox) box.delete(wickBox) wickBox := box.new(leftX_base, topP, rightX_base, botP, xloc=xloc.bar_index, border_color=cWboxBorder, bgcolor=(isBull ? cBullBox : cBearBox)) // wick izračun (v pipih) float wickPips = isBull ? prevH - prevC : prevC - prevL float wickInPips = math.round(wickPips / pipSize) // prikaži samo številko v desnem spodnjem kotu (z nastavljivo velikostjo) table.cell(wickTable, 0, 0, str.tostring(wickInPips), text_color=cPipText, bgcolor=cPipBox, text_size=wickSize)
Pine Script®指標
由denko93提供
Bộ lọc Stoch RSI + MACD + Volume + MFI//@version=6 indicator("Bộ lọc Stoch RSI + MACD + Volume + MFI", overlay=false) // Input lenStoch = input.int(14, "Stoch RSI Length") lenMACD = input.int(12, "MACD Fast Length") lenSignal = input.int(9, "MACD Signal Length") lenMFI = input.int(14, "MFI Length") minVol = input.int(1000000, "Khối lượng tối thiểu") // Stochastic RSI k = ta.stoch(close, high, low, lenStoch) d = ta.sma(k, 3) // MACD macd = ta.ema(close, lenMACD) - ta.ema(close, 26) signal = ta.ema(macd, lenSignal) // ✅ MFI (chỉ cần volume và length) mfi = ta.mfi(volume, lenMFI) // Điều kiện lọc buyCond = (k < 20 and macd > signal and volume > minVol and mfi > 60) sellCond = (k > 80 and macd < signal and mfi < 40) // Xuất tín hiệu plotchar(buyCond, "BUY", "▲", location=location.bottom, color=color.green, size=size.large) plotchar(sellCond, "SELL", "▼", location=location.top, color=color.red, size=size.large)
Pine Script®指標
由Chinhdt提供
Swing Dashboard - Pro Trader Metrics with MTF & Enhanced VolumeDESCRIPTION: A comprehensive real-time dashboard designed for swing traders and active investors trading US equities. Displays all critical metrics in one customizable panel overlay - no need to clutter your chart with multiple indicators. KEY FEATURES: 📊 Relative Strength Analysis: Stock vs Market (SPY/QQQ/IWM/DIA) Stock vs Sector (automatic sector ETF detection) Sector vs Market comparison Customizable lookback period (5-60 days) 📈 Price & Range Metrics: Daily range, change, and gap percentages Distance from SMA20, SMA50, VWAP 52-week position percentage ATR% and ADR% for volatility assessment Range/ADR ratio for breakout detection 💪 Advanced Volume Analysis: RVOL (full day volume vs 20-day average) Volume Strength (bar-by-bar analysis) Volume Trend (5-day vs 20-day momentum) Customizable RVOL alert thresholds Non-repainting volume calculations ⚙️ Multi-Timeframe (MTF) Mode: View daily charts with 5-min or 15-min metric updates Perfect for monitoring positions without switching timeframes All calculations remain accurate across timeframes 🎨 Fully Customizable: Choose which metrics to display 9 position options for the dashboard Adjustable text size and colors Toggle individual metrics on/off Sector-specific ETF mapping for accurate RS calculations TECHNICAL SPECIFICATIONS: ✅ Non-repainting - all calculations use confirmed bar data ✅ No lookahead bias or future data ✅ Optimized for US stocks with proper sector mapping ✅ Works on any timeframe (best on 5m-Daily) ✅ Pine Script v6 with best practices ✅ Handles edge cases and missing data gracefully IDEAL FOR: Swing traders monitoring multiple positions Day traders needing quick metric overview Investors tracking relative strength and momentum Anyone who wants institutional-grade metrics in one place SECTOR ETF MAPPING: Automatically maps to correct sector ETFs: XLK, XLF, XLV, XLY, XLP, XLE, XLB, XLI, XLRE, XLC, XLU HOW TO USE: Green = Positive/Strong | Red = Negative/Weak | White = Neutral RS > 0 = Outperforming benchmark/sector RVOL > 1.5x = High volume day VWAP% negative = Price below VWAP (mean reversion opportunity) R/ADR > 100% = Extended range (potential exhaustion) Perfect for traders who need professional-grade analysis without chart clutter. TAGS: dashboard, swing, relativestrengrh, sectoranalysis, volume, rvol, multitimeframe, mtf, tradingdashboard, metrics, daytrading, swingtrading, momentum, vwap, atr, volatility, volumeanalysis
Pine Script®指標
由nippe678提供
MGG_FX//@version=5 indicator('MGG_FX', overlay=true, max_bars_back=1000, max_labels_count=500, max_lines_count=500, max_boxes_count=500) var GRP1 = "ASIAN RANGE" showLines = input(title='Show Lines', defval=true, group=GRP1) showBackground = input(title='Show Background', defval=true, group=GRP1) showMiddleLine = input(title='Show Middle Line', defval=true, group=GRP1) extendLines = input(title='Extend Line', defval=true, group=GRP1) rangeTime = input.session(title='Session Time', defval='1700-0100', group=GRP1) extendTime = input.session(title='Extend Until', defval='0100-0500', group=GRP1) linesWidth = input.int(1, 'Box And Lines Width', minval=1, maxval=4, group=GRP1) boxLineColor = input(color.new(#434651,50), 'Box Line Color', group=GRP1) middleLineColor = input(color.new(#434651,50), 'Middle Line Color', group=GRP1) backgroundColor = input(color.new(#9598a1,90), 'Box Background Color', group=GRP1) var GRP5 = "LONDON" showLines4 = input(title='Show Lines', defval=true, group=GRP5) showBackground4 = input(title='Show Background', defval=true, group=GRP5) rangeTime4 = input.session(title='Session Time', defval='0300-0400', group=GRP5) linesWidth4 = input.int(1, 'Box And Lines Width', minval=1, maxval=4, group=GRP5) boxLineColor4 = input(color.new(#b2b5be, 95), 'Box Line Color', group=GRP5) backgroundColor4 = input(color.new(#b2b5be, 90), 'Box Background Color', group=GRP5) var GRP6 = "NEWYORK" showLines5 = input(title='Show Lines', defval=true, group=GRP6) showBackground5 = input(title='Show Background', defval=true, group=GRP6) rangeTime5 = input.session(title='Session Time', defval='0900-1000', group=GRP6) linesWidth5 = input.int(1, 'Box And Lines Width', minval=1, maxval=4, group=GRP6) boxLineColor5 = input(color.new(#b2b5be, 95), 'Box Line Color', group=GRP6) backgroundColor5 = input(color.new(#b2b5be, 90), 'Box Background Color', group=GRP6) //////////////////////////////////////////// inSession = not na(time(timeframe.period, rangeTime)) inExtend = not na(time(timeframe.period, extendTime)) startTime = 0 startTime := inSession and not inSession ? time : startTime //Box lines var line lowHLine = na var line topHLine = na var line leftVLine = na var line rightVLine = na var line middleHLine = na var box bgBox = na var low_val = 0.0 var high_val = 0.0 if inSession and not inSession low_val := low high_val := high high_val // Plot lines if inSession and timeframe.isintraday if inSession line.delete(lowHLine) line.delete(topHLine) line.delete(leftVLine) line.delete(rightVLine) line.delete(middleHLine) box.delete(bgBox) if low < low_val low_val := low low_val if high > high_val high_val := high high_val //Create Box //x1, y1, x2, y2 if showBackground bgBox := box.new(startTime, high_val, time, low_val, xloc=xloc.bar_time, bgcolor=backgroundColor, border_width=0) if showLines lowHLine := line.new(startTime, low_val, time, low_val, xloc=xloc.bar_time, color=boxLineColor, style=line.style_solid, width=linesWidth) topHLine := line.new(startTime, high_val, time, high_val, xloc=xloc.bar_time, color=boxLineColor, style=line.style_solid, width=linesWidth) leftVLine := line.new(startTime, high_val, startTime, low_val, xloc=xloc.bar_time, color=boxLineColor, style=line.style_solid, width=linesWidth) rightVLine := line.new(time, high_val, time, low_val, xloc=xloc.bar_time, color=boxLineColor, style=line.style_solid, width=linesWidth) //Create Middle line if showMiddleLine middleHLine := line.new(startTime, (high_val + low_val) / 2, time, (high_val + low_val) / 2, xloc=xloc.bar_time, color=middleLineColor, style=line.style_solid, width=linesWidth) else if inExtend and extendLines and not inSession and timeframe.isintraday time1 = line.get_x1(lowHLine) time2 = line.get_x2(lowHLine) price = line.get_y1(lowHLine) line.delete(lowHLine) lowHLine := line.new(time1, price, time, price, xloc=xloc.bar_time, color=boxLineColor, style=line.style_solid, width=linesWidth) time1 := line.get_x1(topHLine) time2 := line.get_x2(topHLine) price := line.get_y1(topHLine) line.delete(topHLine) topHLine := line.new(time1, price, time, price, xloc=xloc.bar_time, color=boxLineColor, style=line.style_solid, width=linesWidth) time1 := line.get_x1(middleHLine) time2 := line.get_x2(middleHLine) price := line.get_y1(middleHLine) line.delete(middleHLine) middleHLine := line.new(time1, price, time, price, xloc=xloc.bar_time, color=middleLineColor, style=line.style_solid, width=linesWidth) middleHLine //////////////////////////////////////////// inSession4 = not na(time(timeframe.period, rangeTime4)) startTime4 = 0 startTime4 := inSession4 and not inSession4 ? time : startTime4 //Box lines var line lowHLine4 = na var line topHLine4 = na var line leftVLine4 = na var line rightVLine4 = na var line middleHLine4 = na var box bgBox4 = na var low_val4 = 0.0 var high_val4 = 0.0 if inSession4 and not inSession4 low_val4 := low high_val4 := high high_val4 // Plot lines if inSession4 and timeframe.isintraday if inSession4 line.delete(lowHLine4) line.delete(topHLine4) line.delete(leftVLine4) line.delete(rightVLine4) line.delete(middleHLine4) box.delete(bgBox4) if low < low_val4 low_val4 := low low_val4 if high > high_val4 high_val4 := high high_val4 //Create Box //x1, y1, x2, y2 if showBackground4 bgBox4 := box.new(startTime4, high_val4, time, low_val4, xloc=xloc.bar_time, bgcolor=backgroundColor4, border_width=0) if showLines4 lowHLine4 := line.new(startTime4, low_val4, time, low_val4, xloc=xloc.bar_time, color=boxLineColor4, style=line.style_solid, width=linesWidth4) topHLine4 := line.new(startTime4, high_val4, time, high_val4, xloc=xloc.bar_time, color=boxLineColor4, style=line.style_solid, width=linesWidth4) leftVLine4 := line.new(startTime4, high_val4, startTime4, low_val4, xloc=xloc.bar_time, color=boxLineColor4, style=line.style_solid, width=linesWidth4) rightVLine4 := line.new(time, high_val4, time, low_val4, xloc=xloc.bar_time, color=boxLineColor4, style=line.style_solid, width=linesWidth4) //////////////////////////////////////////// inSession5 = not na(time(timeframe.period, rangeTime5)) startTime5 = 0 startTime5 := inSession5 and not inSession5 ? time : startTime5 //Box lines var line lowHLine5 = na var line topHLine5 = na var line leftVLine5 = na var line rightVLine5 = na var line middleHLine5 = na var box bgBox5 = na var low_val5 = 0.0 var high_val5 = 0.0 if inSession5 and not inSession5 low_val5 := low high_val5 := high high_val5 // Plot lines if inSession5 and timeframe.isintraday if inSession5 line.delete(lowHLine5) line.delete(topHLine5) line.delete(leftVLine5) line.delete(rightVLine5) line.delete(middleHLine5) box.delete(bgBox5) if low < low_val5 low_val5 := low low_val5 if high > high_val5 high_val5 := high high_val5 //Create Box //x1, y1, x2, y2 if showBackground5 bgBox5 := box.new(startTime5, high_val5, time, low_val5, xloc=xloc.bar_time, bgcolor=backgroundColor5, border_width=0) if showLines5 lowHLine5 := line.new(startTime5, low_val5, time, low_val5, xloc=xloc.bar_time, color=boxLineColor5, style=line.style_solid, width=linesWidth5) topHLine5 := line.new(startTime5, high_val5, time, high_val5, xloc=xloc.bar_time, color=boxLineColor5, style=line.style_solid, width=linesWidth5) leftVLine5 := line.new(startTime5, high_val5, startTime5, low_val5, xloc=xloc.bar_time, color=boxLineColor5, style=line.style_solid, width=linesWidth5) rightVLine5 := line.new(time, high_val5, time, low_val5, xloc=xloc.bar_time, color=boxLineColor5, style=line.style_solid, width=linesWidth5) /////////////////////////////////////////////// //INPUTS ffRange = input.session(title='Time: ', defval='0200-0201', inline='a', group='FF') ffcolor = input.color(color.new(#b2b5be,20),title="Color:",inline="s_1",group="FF") ffStyle = input.string(title="-", defval=line.style_solid, options= ,inline="s_1",group="FF") mmm1Range = input.session(title='Time: ', defval='0430-0431', inline='a', group='MMM1') mmm1color = input.color(color.new(#b2b5be,20),title="Color:",inline="s_1",group="MMM1") mmm1Style = input.string(title="-", defval=line.style_solid, options= ,inline="s_1",group="MMM1") mmm2Range = input.session(title='Time: ', defval='0630-0631', inline='a', group='MMM2') mmm2color = input.color(color.new(#b2b5be,20),title="Color:",inline="s_1",group="MMM2") mmm2Style = input.string(title="-", defval=line.style_solid, options= ,inline="s_1",group="MMM2") mmm3Range = input.session(title='Time: ', defval='0800-0801', inline='a', group='MMM3') mmm3color = input.color(color.new(#b2b5be,20),title="Color:",inline="s_1",group="mmm3") mmm3Style = input.string(title="-", defval=line.style_solid, options= ,inline="s_1",group="MMM3") lcRange = input.session(title='Time: ', defval='1100-1101', inline='a', group='LC') lccolor = input.color(color.new(#b2b5be,20),title="Color:",inline="s_1",group="LC") lcStyle = input.string(title="-", defval=line.style_solid, options= ,inline="s_1",group="LC") //Plot lines in_session_ff = time(timeframe.period, ffRange) sessionffActive = in_session_ff and timeframe.multiplier <= 240 var line ff = na if sessionffActive and sessionffActive == false ff := line.new(bar_index,high+0.001,bar_index,low-0.001,color=ffcolor, style=ffStyle) in_session_mmm1 = time(timeframe.period, mmm1Range) sessionmmm1Active = in_session_mmm1 and timeframe.multiplier <= 240 var line mmm1 = na if sessionmmm1Active and sessionmmm1Active == false mmm1 := line.new(bar_index,high+0.001,bar_index,low-0.001,color=mmm1color, style=mmm1Style) in_session_mmm2 = time(timeframe.period, mmm2Range) sessionmmm2Active = in_session_mmm2 and timeframe.multiplier <= 240 var line mmm2 = na if sessionmmm2Active and sessionmmm2Active == false mmm2 := line.new(bar_index,high+0.001,bar_index,low-0.001,color=mmm2color, style=mmm2Style) in_session_mmm3 = time(timeframe.period, mmm3Range) sessionmmm3Active = in_session_mmm3 and timeframe.multiplier <= 240 var line mmm3 = na if sessionmmm3Active and sessionmmm3Active == false mmm3 := line.new(bar_index,high+0.001,bar_index,low-0.001,color=mmm3color, style=mmm3Style) in_session_lc = time(timeframe.period, lcRange) sessionlcActive = in_session_lc and timeframe.multiplier <= 240 var line lc = na if sessionlcActive and sessionlcActive == false lc := line.new(bar_index,high+0.001,bar_index,low-0.001,color=lccolor, style=lcStyle) ////////////////////////////////////////////////////////////////////// // Inputs var GRP10 = "Daily Open" daily = input.string(title='View', defval='Daily Open', group=GRP10) _offset = input.int(0, title='Offset', minval=0, maxval=2) o_color = input.color(color.new(#000000, 0), "Open Color", inline="1", group = GRP10) // FUNCTIONS t = time isNewbar = not na(t) and (na(t ) or t > t ) tfInMinutes(simple string tf = "") => float chartTf = timeframe.multiplier * ( timeframe.isseconds ? 1. / 60 : timeframe.isminutes ? 1. : timeframe.isdaily ? 60. * 24 : timeframe.isweekly ? 60. * 24 * 7 : timeframe.ismonthly ? 60. * 24 * 30.4375 : na) float result = tf == "" ? chartTf : request.security(syminfo.tickerid, tf, chartTf) inTimeframe(_t) => tfInMinutes(_t) > tfInMinutes(timeframe.period) // Range reso(exp, res) => request.security(syminfo.tickerid, res, exp, lookahead=barmerge.lookahead_on) getData(_t, _var) => o = reso(open , _t) show = _var != "Off" and inTimeframe(_t) _time = time(_t) newbar = na(_time ) or _time > _time oc = _var == 'Daily Open' // ---------- Daily ---------- = getData("D", daily) if d_newbar if d_oc line.new(x1=time, y1=d_o, x2=time_close("D"), y2=d_o, xloc=xloc.bar_time, style=line.style_dotted, color=o_color) //-------------------- WATERMARK-------------------- //////////////////////////////////////////////////// //text inputs title = input.string("JDVID_FX", "Tittle", group = "NICK NAME") subtitle = input.string("𝗖𝗬𝗖𝗟𝗘 | 𝗧𝗜𝗠𝗜𝗡𝗚 | 𝗣𝗥𝗘𝗖𝗜𝗦𝗜𝗢𝗡", "Subtitle", group = "text") //symbol info symInfoCheck = input.bool(title="Show Symbol Info", defval=true, group = "watermark position") symInfo = syminfo.ticker + " | " + timeframe.period + (timeframe.isminutes ? "M" : na) date = str.format("{0}/{1}/{2}", dayofmonth(time_close), month(time_close), year(time_close)) //text positioning textVPosition = input.string("top", "Vertical Position", options = , group = "watermark position") textHPosition = input.string("center", "Horizontal Position", options = , group = "watermark position") //symbol info positioning symVPosition = input.string("bottom", "Vertical Position", options = , group = "symbol position") symHPosition = input.string("center", "Horizontal Position", options = , group = "symbol position") //cell size cellWidthPercent = input.float(0, "Cell Width (%)", minval = 0, maxval = 100, tooltip = "The width of the cell as a % of the indicator's visual space. Optional. By default, auto-adjusts the width based on the text inside the cell. Value 0 has the same effect.", group = "cell size") cellHeightPercent = input.float(0, "Cell Height (%)", minval = 0, maxval = 100, tooltip = "The height of the cell as a % of the indicator's visual space. Optional. By default, auto-adjusts the height based on the text inside of the cell. Value 0 has the same effect.", group = "cell size") //title settings c_title = input(color.new(color.black, 0), "Title Color", group = "title settings") s_title = input.string("large", "Title Size", options = , group = "title settings") a_title = input.string("center","Title Alignment", options = , group = "title settings") //subtitle settings c_subtitle = input(color.new(color.black, 30), "Subtitle Color", group = "subtitle settings") s_subtitle = input.string("small", "Subtitle Size", options = , group = "subtitle settings") a_subtitle = input.string("center","Subtitle Alignment", options = , group = "subtitle settings") //symbol settings c_symInfo = input(color.new(color.black, 30), "Subtitle Color", group = "symbol settings") s_symInfo = input.string("normal", "Subtitle Size", options = , group = "symbol settings") a_symInfo = input.string("center","Subtitle Alignment", options = , group = "symbol settings") c_bg = input(color.new(color.blue, 100), "Background", group = "background") //text watermark creation var table textWatermark = table.new(textVPosition + "_" + textHPosition, 1, 3) table.cell(textWatermark, 0, 0, title, width = cellWidthPercent, height = cellHeightPercent, text_color = c_title, text_halign = a_title, text_size = s_title, bgcolor = c_bg) table.cell(textWatermark, 0, 1, subtitle, width = cellWidthPercent, height = cellHeightPercent, text_color = c_subtitle, text_halign = a_subtitle, text_size= s_subtitle, bgcolor = c_bg) //symbol info watermark creation var table symWatermark = table.new(symVPosition + "_" + symHPosition, 5, 5) if symInfoCheck table.cell(symWatermark, 0, 1, symInfo, width = cellWidthPercent, height = cellHeightPercent, text_color = c_symInfo, text_halign = a_symInfo, text_size = s_symInfo, bgcolor = c_bg) table.cell(symWatermark, 0, 0, date, width = cellWidthPercent, height = cellHeightPercent, text_color = c_symInfo, text_halign = a_symInfo, text_size = s_symInfo, bgcolor = c_bg)
Pine Script®指標
由moygonzalez_7提供
Alpha - Multi-Asset Adaptive Trading Strategy# Alpha - Multi-Asset Adaptive Trading Strategy Overview Alpha is a comprehensive trading strategy that combines multiple technical analysis components with pre-optimized settings for over 70 different trading instruments across cryptocurrencies, forex, and stocks. The strategy employs an adaptive approach using modified trend detection algorithms, dynamic support/resistance zones, and multi-timeframe confirmation. Key Features & Originality 1. Adaptive Trend Detection System - Modified trend-following algorithm with amplitude-based channel deviation - Dynamic channel width adjustment based on ATR (Average True Range) - Dual-layer trend confirmation using both price action and momentum indicators 2. Pre-Configured Asset Optimization The strategy includes carefully backtested parameter sets for: - **Cryptocurrencies**: BTC, ETH, and 40+ altcoin pairs - **Forex Pairs**: Major and minor currency pairs - **Stocks**: TSLA, AAPL, GOOG - **Commodities**: Gold, Silver, Platinum - Each configuration is optimized for specific timeframes (5m, 15m, 30m, 45m, 1h) 3. Advanced Risk Management - Multiple take profit levels (4 targets with customizable position sizing) - Dynamic stop-loss options (ATR-based or percentage-based) - Position size allocation across profit targets (default: 30%, 30%, 30%, 10%) 4. Multi-Timeframe Analysis Dashboard - Real-time analysis across 4 configurable timeframes - Comprehensive performance metrics display - Visual representation of current market conditions 5. Market Condition Filtering - RSI-based trend strength filtering - ATR-based volatility filtering - Sideways market detection to avoid choppy conditions - Customizable filter combinations (ATR only, RSI only, both, or disabled) How to Use Initial Setup 1. **Select Asset Configuration**: Choose your trading pair from the "Strategies" dropdown menu 2. **Enable Strategy**: Enter "Alpha" in the code confirmation field 3. **Adjust Timeframe**: Match your chart timeframe to the selected strategy configuration Parameter Customization - **Trendline Settings**: Adjust amplitude and channel deviation for sensitivity - **TP/SL Method**: Choose between ATR-based or percentage-based targets - **Filtering Options**: Select appropriate market filters for your trading style - **Backtest Period**: Set the number of days for strategy testing (max 60) Signal Interpretation - **BUY/SELL Labels**: Primary entry signals based on trend changes - **Support/Resistance Zones**: Visual zones showing key price levels - **Dashboard**: Real-time display of position status, targets, and performance metrics Important Considerations Limitations and Warnings - **Backtesting Period**: Results shown are based on historical data from the specified backtest period - **No Guarantee**: Past performance does not guarantee future results - **Market Conditions**: Strategy performance varies with market volatility and trending conditions - **Repainting**: Some signals may repaint if "Wait For Confirmed Bar" is disabled Risk Warnings - The pre-configured settings are starting points and may require adjustment for current market conditions - Always use appropriate position sizing and risk management - Test thoroughly on demo accounts before live trading - Monitor and adjust parameters regularly as market dynamics change Technical Components Core Indicators Used - Modified trend detection with amplitude-based channels - RSI (Relative Strength Index) for momentum confirmation - ATR (Average True Range) for volatility measurement - Support/Resistance detection using pivot points - Bollinger Band variant for trend confirmation Alert Functionality The strategy includes comprehensive alert options for: - Entry signals (long and short) - Take profit levels (TP1, TP2, TP3, TP4) - Stop loss triggers - Integration with trading bots via webhook messages Recommended Usage Best Practices 1. Start with the pre-configured settings for your chosen asset 2. Run backtests over different time periods to verify performance 3. Use the dashboard to monitor real-time strategy performance 4. Adjust filters based on current market conditions 5. Always use stop losses and proper risk management Timeframe Recommendations - **Short-Term**: Use 5m, 15m configurations for scalping - **Mid-Term**: Use 30m, 45m configurations for day trading - **Long-Term**: Use 1h configurations for swing trading Updates and Support The strategy parameters are regularly reviewed and optimized. Users should periodically check for updates to ensure they have the latest configurations. Disclaimer This strategy is for educational and informational purposes only. Trading involves substantial risk of loss. Users should conduct their own research and consider their financial situation before trading. The author is not responsible for any trading losses incurred using this strategy.
Pine Script®策略
由DrFXGOD提供