PRO_Indicators

PRO Momentum

PRO_Indicators 已更新   
[---> ZOOM IN THE CHART TO GET BETTER SIGHT ! <--- or look at the picture version if render is messy : (INVITE ONLY indicator. Access to all my indicators for a symbolic 1€/day subscription + FREE WEEK TRIAL)
Please don't post comment to ask for unlock... if you want to try it out, simply follow the link at the bottom and trigger your trial !

_________________________

Code is available via INVITE ONLY and can only be unlocked by subscription plan.
THE PRICING IS FOR ALL MY INDICATOR AND IS A SYMBOLIC 1€/DAY + A FREE 1 WEEK TRIAL so you'll be sure not to get caught into something you don't like ! Only something you use daily !
Subscriptions are handled by Paypal and you can choose billing cycle from standard monthly payment to as low as the 1€ daily billing. Recurrent payments that you can stop at ANY TIME.
To get your access visit :
pro-indicators.com/subscription


_________________________

PRO MOMENTUM IS BASED ON MY OWN SECRET MOMENTUM FORMULA + A SMART SIGNAL ALGORITHM :
Everyone likes RSI for its fast and no lag response to prices, but of course this brings its own inconvenience, RSI is ofter harsh and hard to filter when it's noisy. There's also a lot of people that like MACD, that's the opposite, this one uses averaging to smooth things ! Of course the result is clean but this is at the big cost of excessive lag introduction.. MACD is alway too late ! I wanted to have somthing right in the middle... no to harsh and not too laggy.. Here comes PRO Momentum's exclusive formula. But no worries if you're into RSI you'll be able to use it anyway !
Cause the heart of this indicator is not just its formula.. its more about the core algorythm that reads it and trigger out signals. Of course this algorithm is way more complicated than just searching for overbought/oversold or divergences like most others will.
This one is also (as Sinewave) the result of 3 years of fine tuning and the filter algorithm is almost 500 codelines of complex conditions ! This is nearly a built-in strategy in itself.
The indicator is not just giving buy/sell signals, it also detects two additional, and very important informations about momentum :
  • Overbough/Oversold conditions (highlighted on specific bars not like a simple Stochastic would do when its above 80 or below 20)...
  • Overload conditions which is slightly different from overbough/sold. Its actually the precise point where the momentum is reaching exhaustion and is likely to reverse at short term, or it will need to take stops in order to continue. That second part is really important. Cause Overloads will be key momentum level where two different things can happen. Market can eitherl fail and probably return to previous supports/resistances, or, market succeed to break a key level to chase stops above it. Having these signals on chart is really lifesaving sometimes ! Specially to assess the potential risk of false breakouts.

Aside from PRO Momentum itself, there also another important thing to talk about, it's the Sinewave/Momentum integration. That's a very nice couple out there ! One filling the gaps of the other. Of cource cycle analysis an momentum tend to give signals with the same timing, but their sources are totally uncorrelated wich makes them cumulative. Not like adding a stochastic to an RSI which are basically two different calculation of the same thing ! The quick exemple above shows very well how the couple can work using Sinewave's rules and strategy and simply adding a Momentum layer there to help confirming (or contradict sometimes) the signals.

Allright folks ! Hope I caught your interest with these indicators !
Don't hesitate to comment as well if you have any question suggestion or review to shar
發布通知:
****** MAJOR UPDATE ******
introducing :

You now have everything needed to take the best out of these indicators !
發布通知:
Added a few new conditions and removed the BREAK signals (feedback tend to tell that people were confiused by this signal).
Also added a visual text message to signal if current bar is overbought/sold another option does the same for Overloads (you can turn this feature off via the settings).
Darj version should be released soon for those who use the TradingView's dark theme !
Check my profile's script folder to find them.
發布通知:
MAJOR UPDATE :
發布通知:
Changed the display of Overload Signals to gray dots... I'll update the PDF Manual in early 2018.
發布通知:
Added the signal detection algorithm ! You'll now see a message saying "BEAR SIGNAL" or "BULL SIGNAL" on momentum when there is confirmation. Use these signals to confirm Sinewave signals ;)
It's just easier for you now cause the algo is doing the interpretation job for you ! Right now on Momentum you'll have a simple reading !
Bull confirmation, Bear confirmation, no confirmation ! Can't make it easier !
發布通知:
Minor changes !
發布通知:
Small bug corrected
發布通知:
MAJOR UPDATE :
- Added quite some new patterns
- Improved the Overbough/Oversold/Overload detection
- Removed some alerts that were useless since the last TradingView update of their alert system...
(now you can choose to trigger alerts at bar close so use this to have confirmed signals)
發布通知:
Minor update (a few new patterns added)
發布通知:
minor bug correction
發布通知:
minor update : one new bull/bear pattern added.
發布通知:
added one more BULL/BEAR pattern
發布通知:
Corrected the "no depth at index" error on LTCUSD charts
發布通知:
added a TP pattern.
發布通知:
Added one new bull/bear pattern.
發布通知:
Added one TP pattern
發布通知:
Added one more TP pattern & corrected a bug on a BULL/BEAR pattern
發布通知:
Added an Exit pattern
發布通知:
*** MAJOR UPDATE ***
This one comes along the release of PRO Framework indicator.
The Strategy application will be reviewed and simplified to help user learn faster how to properly use those tools !
The website will be updated soon as well.
Users will also soon be notified via Email when the overall update process will be dealt with and that the new video tutorial content will be done.
發布通知:
Minor Update (v1.6) :
Standard Divergence will now be colored gray instead of blue/red. As these signals require visual confirmation and remain risky to trade for reversals.
(Hidden Divergences will remain colored blue/red)

USER REQUEST ADDED :
There is now a dummy signal output available to trigger alerts on Sinewave + Momentum trading signals.
This output is called "Signals...". Select this output on the alert tab and use trigger condition greater than set with 0 as value for bull alerts / less than 0 for bearish ones.
發布通知:
Removed the Alert output.
To create on Sinewave + Momentum OK signals you now have a specified alert.
On the Alert window, select PRO Momentum as input, then among the trigger conditions, you should find "BULL OK" and "BEAR OK" on top of the list. These two conditions will trigger when both the Momentum & Sinewave are displaying OK signals to buy. Simply select the desired trigger option for the alert and you're done !
發布通知:
minor update v1.8 : (variable optimisation)
發布通知:
*** Minor Update *** (v1.9)
- Updated to support use of the seconds timeframe based charts
- Added two new built-in alerts :
> Reversal Signal Alerts (when TP or EXIT signals trigger with a Sinewave cycle confirmation)
> Trend Signal Alerts (when BULL/BEAR and colored DIV signals trigger with a Sinewave cycle confirmation)
This was a user request but this feature is for experienced traders only. Remember that you must never read the Momentum prior to your context identification and price filtering !!! If you dare trading a signal just by itself... you'll be dead sooner or later.
發布通知:
*** MAJOR UPDATE *** (v2.0)
Now fully supporting the pine script V4.0.
Added two new EXIT patterns
Fixed an issue with alerts on "Reversal Patterns"
發布通知:
*** Compatibility Update ***
Fixed the bug from latest tradingview update.
Nothing has changed on the indicator itself.
發布通知:
*** MINOR UPDATE *** (v2.1)
Updated a few patterns (shouldn't make a significant difference for previous signals)
發布通知:
*** MAJOR UPDATE *** (v5.0)
Now fully supporting the pine script V5.0.
Added support for DARK THEME (option has to be turned on via the settings)
Added an option to display the current momentum value as a digit (option can be turned off via settings)
發布通知:
*** MAJOR UPDATE *** (v5.2)
Introducing the "Level Progression" system. When the indicator is first plotted it will ask you to choose your current level with the strategy. The indicator will then display only the relevant pieces. This is meant to make the indicator adaptive as you progress with the different contexts (range, trend, volatility).

Daily Market Reviews (FR+ENG) : youtube.com/c/proindicatorsbundle

// Website : pro-indicators.com
// Discord : discord.gg/Agdf5rt
// Twitter (FR) : twitter.com/Phil_RX
// Telegram (ENG) : t.me/pro_indicators
僅限邀請腳本

僅限作者授權的用戶訪問此腳本,並且通常需要付費。您可以將其增加到收藏腳本中,但是只有在向作者請求並獲得許可之後,才能使用它。 請與PRO_Indicators聯繫以獲取更多資訊,或按照以下作者的說明進行操作。

在您100%信任腳本作者並了解腳本的工作原理之前,TradingView不建議您購買腳本並使用它。在很多情況下,您可以在我們的社群腳本庫中免費找到一個不錯的開源替代品。

免責聲明

這些資訊和出版物並不意味著也不構成TradingView提供或認可的金融、投資、交易或其他類型的意見或建議。請在使用條款閱讀更多資訊。

作者的說明

PRO Indicators Bundle (PRO Momentum & PRO Framework) are accessible via subscription plan handled via my website (see my description to find the link) where you can request a free trial as well as finding all the documentation on "how-to" use these tools

想在圖表上使用此腳本?

警告:請閱讀,然後再請求訪問權限。