立即開始

移動平均線

EMA 50/200/100 [NevoxCore]⯁ OVERVIEW EMA 50/200/100 is a clean EMA trio for trend mapping. It highlights the classic 50/200 bias, keeps a constant EMA-100 anchor in white, plots cross dots, and can mark the first pullback back to a target EMA within an ATR tolerance. Solid bias bar coloring (Nevox pink/orange or classic green/red) and compact visuals make it fast and reliable with no repainting. ⯁ HOW IT WORKS Calculates Fast EMA 50, Slow EMA 200, and an always-on EMA 100 (white). Bias = Fast vs. Slow: Fast > Slow → long regime; Fast < Slow → short regime. Cross dots appear at confirmed 50/200 crosses (once per bar close). First Pullback: after a cross, the script arms a window and marks the first return to the chosen EMA (100 or Fast) within ATR × tolerance. Bar coloring is solid by regime (pink/orange by default, classic green/red when enabled). No lookahead; signals confirm on bar close. ⯁ KEY FEATURES • EMA 50/200 with EMA-100 anchor (always visible, white) • Cross Up/Down dots (style-configurable) • First Pullback marker (toggle) with ATR tolerance & window • Solid bias bar coloring (Nevox or classic) • Optional bias fill between Fast/Slow • Minimal 1-cell HUD (OFF by default) • Ready-made alerts with clean prefixes ⯁ SETTINGS (quick) Visual: Classic colors toggle; Bias Fill (ON); Fill Transparency (85); Bar Color (solid, ON; auto-disabled when Classic is ON). Core: Source = Close; EMA Fast = 50; EMA Slow = 200. Pullback: Show marker (ON); Target EMA = EMA 100; Tolerance × ATR = 0.5; Max Bars After Cross = 40; ATR Length = 14. HUD: Mini HUD OFF; Position selector. Status Line: OFF by default (optional EMA values). ⯁ ALERTS (built-in) • Cross Up (Fast above Slow) — confirmed at bar close • Cross Down (Fast below Slow) — confirmed at bar close • First Pullback LONG — first return to target after long cross • First Pullback SHORT — first return to target after short cross Prefix: EMA and message includes {{ticker}} {{interval}} @ {{close}}. Suggested: set TradingView alerts to Once Per Bar Close. ⯁ HOW TO USE • Read trend quickly: 50 above 200 with a rising 100 = healthy long bias. • Use the First Pullback to time entries after a cross (default target = EMA 100). • Tune Tolerance × ATR by symbol/TF; 0.3–0.7 is a good start. • Keep charts clean: bias fill + barcolor ON; switch to Classic for green/red if preferred. ⯁ WHY IT’S DIFFERENT It preserves the classic 50/200 logic but adds a consistent EMA-100 anchor, a single, one-shot pullback detector, and clean bias bars — all in a lightweight overlay with no repaint tricks. ⯁ DISCLAIMER Backtest and paper-trade before using live. Not financial advice. Performance depends on market, timeframe, and parameters.
Pine Script®指標
由NevoxCore提供
RVol+ Enhanced Relative Volume Indicator📊 RVol+ Enhanced Relative Volume Indicator Overview RVol+ (Relative Volume Plus) is an advanced time-based relative volume indicator designed specifically for swing traders and breakout detection. Unlike simple volume comparisons, RVol+ analyzes volume at the same time of day across multiple sessions, providing statistically significant insights into institutional activity and breakout potential. 🎯 Key Features Core Volume Analysis Time-Based RVol Calculation - Compares current cumulative volume to the average volume at this exact time over the past N days Statistical Z-Score - Measures volume in standard deviations from the mean for true anomaly detection Volume Percentile - Shows where current volume ranks historically (0-100%) Sustained Volume Filter - 3-bar moving average prevents false signals from single-bar spikes Breakout Detection 🚀 Confirmed Breakouts - Identifies price breakouts validated by high volume (RVol > 1.5x) ⚠️ False Breakout Warnings - Alerts when price breaks key levels on low volume (high failure risk) Multi-Timeframe Context - Weekly volume overlay prevents chasing daily noise Advanced Metrics OBV Divergence Detection - Spots bullish/bearish accumulation/distribution patterns Volume Profile Integration - Identifies institutional positioning Money Flow Analysis - Tracks smart money vs retail activity Extreme Volume Alerts - 🔥 Labels mark unusual spikes beyond the display cap Visual Intelligence Smart Color Coding: 🟢 Bright Teal = High activity (RVol ≥ 1.5x) 🟡 Medium Teal = Caution zone (RVol ≥ 1.2x) ⚪ Light Teal = Normal activity 🟠 Orange = Breakout confirmed 🔴 Red = False breakout risk Comprehensive Stats Table: Current Volume (formatted as M/K/B) RVol ratio Z-Score with significance Volume percentile Historical average and standard deviation Sustained volume confirmation 📈 How to Use For Swing Trading (1D - 3W Holds) Perfect Setup: ✓ RVol > 1.5x (bright teal) ✓ Z-Score > 2.0 (⚡ alert) ✓ Percentile > 90% ✓ Sustained = ✓ ✓ 🚀 Breakout label appears Avoid: ✗ Red "Low Vol" warning during breakouts ✗ RVol < 1.0 at key levels ✗ Sustained volume not confirmed Signal Interpretation ⚡ Z>2 Labels - Statistically significant volume (95th+ percentile) - highest probability moves ↗️ OBV+ Labels - Bullish accumulation (OBV rising while price consolidates) ↘️ OBV- Labels - Bearish distribution (OBV falling while price rises) 🔵 Blue Background - Weekly volume elevated (confirms daily strength) ⚙️ Customization Basic Settings N Day Average - Number of historical days for comparison (default: 5) RVol Thresholds - Customize highlight levels (default: 1.2x, 1.5x) Visual Display Cap - Prevent extreme spikes from compressing view (default: 4.0x) Advanced Metrics (Toggle On/Off) Z-Score analysis Weekly RVol context OBV divergence detection Volume percentile ranking Breakout signal generation Table Customization Position - 9 placement options to avoid chart overlap Size - Tiny to Huge Colors - Full customization of positive/negative/neutral values Transparency - Adjustable background Debug Mode Enable Pine Logs for calculation transparency Adjustable log frequency Real-time calculation breakdown 🔬 Technical Details Algorithm: Binary search for historical lookups (O(log n) performance) Time-zone aware session detection DST-safe timestamp calculations Exponentially weighted standard deviation Anti-repainting architecture Performance: Optimized for max_bars_back = 5000 Efficient array management Built-in function optimization Memory-conscious data structures 📊 What Makes RVol+ Different? vs. Standard Volume: Context-aware (time-of-day matters) Statistical significance testing False breakout filtering vs. Basic RVol: Z-Score normalization (2-3 sigma detection) Multi-timeframe confirmation OBV divergence integration Sustained volume filtering Smart visual scaling vs. Professional Tools: Free and open-source Fully customizable No black-box algorithms Educational debug logs 💡 Best Practices Wait for Confirmation - Don't enter on first bar; wait for sustained volume ✓ Combine with Price Action - RVol validates, price structure determines entry Weekly Context Matters - Blue background = institutional interest Z-Score is King - Focus on ⚡ alerts for highest probability Avoid Low Volume Breakouts - Red ⚠️ labels = high failure risk 🎓 Trading Psychology Volume precedes price. When RVol+ shows: High RVol + Rising OBV = Accumulation before breakout High RVol at Resistance = Test of conviction Low RVol on Breakout = Retail-driven (fade candidate) Z-Score > 3 = Potential "whale" positioning 📝 Credits Based on the time-based RVol concept from /u/HurlTeaInTheSea, enhanced with: Statistical analysis (z-scores, percentiles) Multi-timeframe integration OBV divergence detection Professional-grade visualization Swing trading optimization 🔧 Version History v2.0 - Enhanced Edition Added Z-Score analysis Multi-timeframe volume context OBV divergence detection Breakout confirmation system Smart color coding Customizable stats table Debug logging mode Performance optimizations 📚 Learn More For optimal use with swing trading: Combine with support/resistance levels Watch for volume clusters in consolidation Use weekly timeframe for trend confirmation Monitor OBV divergence for early warnings ⚠️ Disclaimer This indicator is for educational purposes. Volume analysis is one component of trading decisions. Always use proper risk management, consider multiple timeframes, and validate signals with price structure. Past performance does not guarantee future results. 🚀 Getting Started Add indicator to chart Adjust "N Day Average" to your preference (5-10 days typical) Position stats table to avoid overlap Enable features you want to monitor Watch for 🚀 breakout confirmations! Happy Trading! 📈
Pine Script®指標
由nippe678提供
Scalper - Pattern Recognition & Price Action with Divergence Scalper - Pattern Recognition & Price Action with Divergence Overview An educational indicator designed to demonstrate comprehensive technical analysis concepts through integrated pattern recognition, price action analysis, and divergence detection. This tool combines traditional candlestick patterns with modern institutional concepts and advanced divergence analysis for educational market study. Educational Purpose & Originality Core Educational Concepts This indicator serves as a learning platform for understanding: - **Pattern Recognition Methodology**: Systematic identification of candlestick formations - **Price Action Theory**: Modern institutional footprint analysis - **Divergence Analysis**: Momentum divergence detection across multiple oscillators - **Confluence Systems**: Multi-signal integration and validation techniques Original Implementation Features 1. Enhanced Pattern Detection Library - **Volatility-Filtered Patterns**: ATR-based validation for pattern significance - **Volume-Confirmed Formations**: Integration of volume analysis with pattern detection - **Multi-Candle Pattern Recognition**: Three-candle formations and complex patterns - **Context-Aware Detection**: Patterns validated against market structure 2. Advanced Divergence System - **Multi-Oscillator Analysis**: RSI, CCI, and MACD divergence detection - **Four Divergence Types**: Regular bullish/bearish and hidden bullish/bearish - **Pivot-Based Detection**: Systematic swing high/low identification - **Weighted Signal Integration**: Divergences integrated into confluence scoring 3. Modern Price Action Concepts - **Fair Value Gaps (FVG)**: Identification of institutional inefficiencies - **Order Block Detection**: Volume-validated accumulation/distribution zones - **Dynamic Support/Resistance**: Touch-count validated levels with ATR tolerance - **Breakout Analysis**: Volume-confirmed price breakouts 4. Intelligent Confluence System - **Multi-Signal Aggregation**: Combines patterns, oscillators, divergences, and breakouts - **Weighted Scoring Algorithm**: Different signal types receive appropriate weighting - **Visual Confluence Display**: Clear indication of high-probability setups - **Reason Tracking**: Shows which signals contribute to confluence How to Use Initial Configuration 1. **Enable Desired Components**: Toggle individual analysis modules based on learning focus 2. **Adjust Sensitivity Settings**: Configure pattern detection parameters for your market 3. **Select Divergence Options**: Choose oscillators and divergence types to monitor 4. **Set Confluence Requirements**: Define minimum signals needed for confirmation Component Settings Moving Average Configuration - Four customizable MA lines for multi-timeframe trend analysis - Selectable MA types (SMA, EMA, WMA, VWMA, HMA) - Independent timeframe settings for each MA Pattern Recognition Settings - **Engulfing Patterns**: Strong engulfing with ATR validation - **Doji Variations**: Standard, gravestone, and dragonfly detection - **Hammer/Hanging Man**: Context-validated reversal patterns - **Star Formations**: Morning and evening star patterns - **Three Soldiers/Crows**: Momentum continuation patterns Divergence Detection Parameters - **Lookback Period**: Adjustable swing detection range - **Minimum Pivot Strength**: Percentage threshold for valid pivots - **Oscillator Selection**: RSI, CCI, MACD, or combination - **Divergence Types**: Regular and hidden divergences Signal Interpretation Visual Indicators - **Pattern Labels**: Clear marking of detected formations - **Divergence Lines**: Visual connection between price and oscillator pivots - **Support/Resistance Levels**: Dynamic horizontal levels with validation - **Confluence Signals**: Large "BULL" or "BEAR" labels for high-probability setups Dashboard Information - Real-time oscillator values (RSI, CCI, MACD) - Current signal count for bulls and bears - Active divergence status - Confluence confirmation status Important Educational Considerations Learning Focus - **Pattern Study**: Understand how traditional patterns form and their limitations - **Divergence Concepts**: Learn to identify momentum shifts before price reversals - **Confluence Theory**: Practice combining multiple analysis techniques - **Risk Awareness**: No pattern or signal guarantees future price movement Limitations for Learning - **Historical Analysis**: Patterns are identified after formation - **No Predictive Guarantee**: Educational tool for understanding concepts, not predictions - **Market Context Required**: Patterns should be considered within broader market context - **Practice Required**: Effective use requires study and practice Educational Best Practices 1. **Start Simple**: Enable one component at a time to understand each concept 2. **Paper Trade**: Practice identifying signals without real money risk 3. **Study Failed Signals**: Learn why patterns fail to improve understanding 4. **Combine with Other Analysis**: Use alongside fundamental and sentiment analysis 5. **Document Observations**: Keep a journal of pattern occurrences and outcomes Technical Components Indicator Architecture - **Modular Design**: Independent modules for different analysis types - **Performance Optimization**: Efficient calculation methods for smooth operation - **Visual Management**: Controlled use of Pine Script drawing objects - **Array-Based Storage**: Efficient data management for historical analysis Calculation Methods - **ATR-Based Validation**: Volatility-adjusted pattern filtering - **Volume Analysis**: Comparative volume assessment for confirmation - **Pivot Detection**: Mathematical identification of swing points - **Statistical Validation**: Touch-count and tolerance-based S/R levels Divergence Detection Methodology Regular Divergences (Reversal Signals) - **Bullish**: Price lower low + Oscillator higher low - **Bearish**: Price higher high + Oscillator lower high Hidden Divergences (Continuation Signals) - **Hidden Bullish**: Price higher low + Oscillator lower low - **Hidden Bearish**: Price lower high + Oscillator higher high Validation Criteria - Minimum pivot strength requirement (percentage-based) - Lookback period for swing detection - Multiple oscillator confirmation option Confluence Scoring System Signal Categories 1. **Pattern Signals** (Weight: 1): Candlestick formations 2. **Oscillator Signals** (Weight: 1): RSI/CCI extremes 3. **Breakout Signals** (Weight: 1): Volume-confirmed breaks 4. **Regular Divergences** (Weight: 2): Higher probability reversals 5. **Hidden Divergences** (Weight: 1): Trend continuation signals Confluence Thresholds - Adjustable minimum signal requirement (2-6 signals) - Visual indication when threshold is met - Detailed reason display for educational understanding Educational Dashboard Real-Time Metrics - Oscillator readings (RSI, CCI, MACD) - ATR volatility measurement - Bull/Bear signal counts - Divergence status - Confluence confirmation Customization Options - Position selection (6 screen locations) - Color customization for all elements - Enable/disable individual components Version Information - **Version 1.1**: Added comprehensive divergence detection system - **Educational Focus**: Designed for learning technical analysis concepts - **Integration**: All components work together in confluence system Disclaimer This indicator is designed exclusively for educational purposes to demonstrate technical analysis concepts. It is not financial advice and should not be used as the sole basis for trading decisions. Past patterns and signals do not guarantee future results. Trading involves substantial risk of loss. Users should conduct their own research, practice with demo accounts, and consider seeking advice from qualified professionals before making investment decisions. Learning Resources The indicator includes extensive inline comments explaining each calculation and concept. Users are encouraged to study the source code to understand the methodology behind each component. This transparency aids in learning how technical indicators work and their limitations. --- **Note**: This is an educational tool meant to help traders learn pattern recognition and technical analysis concepts. Success requires practice, additional analysis, and proper risk management.
Pine Script®指標
由DrFXGOD提供
Intraday Rising & Reversal ScannerPine Script Description: Intraday Rising & Reversal ScannerThis Pine Script is a TradingView indicator designed to identify stocks with intraday (1-hour timeframe) potential for bullish (rising) or bearish (reversal) movements. It scans for stocks based on user-defined technical criteria, including price change, relative volume, RSI, EMA, ATR, and VWAP. The script plots signals on the chart, displays a summary table, and triggers alerts when conditions are met.FeaturesBullish Signal (Rising Stocks):1H Price Change: > 1% (configurable, e.g., >2% for volatile markets). Relative Volume: > 2.0 (volume is at least twice the 20-period average). RSI (14): Between 50 and 70 (strong but not overbought momentum). Price vs EMA 13: Price above the 13-period EMA (confirms short-term uptrend). ATR (14): Current ATR above its 20-period average (indicates volatility). VWAP: Price above VWAP (optional, shown on chart for manual confirmation). Bearish Signal (Reversal Stocks):1H Price Change: < -1% (configurable, e.g., <-2% for stronger reversals). Relative Volume: > 2.0 (high volume confirms selling pressure). RSI (14): > 70 (overbought, increasing reversal likelihood). Price vs EMA 13: Price below the 13-period EMA (confirms short-term downtrend). ATR (14): Current ATR above its 20-period average (indicates volatility). VWAP: Price below VWAP (optional, shown on chart for manual confirmation). Visualization:Bullish Signal: Green triangle below the bar. Bearish Signal: Red triangle above the bar. VWAP: Plotted as a blue line for manual verification. Table: Displays real-time metrics (Change %, Relative Volume, RSI, Price vs EMA, ATR, VWAP) in the top-right corner, color-coded (green for bullish, red for bearish). Alerts:Separate alerts for bullish ("Intraday Bullish Signal") and bearish ("Intraday Bearish Signal") conditions. Customizable alert messages include parameter values for easy tracking. How It WorksThe script runs on the 1-hour (1H) timeframe, ensuring all calculations are based on hourly data. Indicators are computed:Change %: Percentage price change over the last hour. Relative Volume: Current volume divided by the 20-period SMA of volume. RSI: 14-period Relative Strength Index. EMA 13: 13-period Exponential Moving Average. ATR: 14-period Average True Range, compared to its 20-period SMA. VWAP: Volume Weighted Average Price, plotted for visual confirmation. Signals are generated when all conditions for either bullish or bearish criteria are met. A table summarizes key metrics, and alerts can be set up for real-time notifications. Usage InstructionsApply the Script:Open TradingView’s Pine Editor. Copy and paste the script. Click "Add to Chart" and set the chart to the 1-hour (1H) timeframe. Set Up Alerts:Right-click on the chart > "Add Alert". Select "Intraday Bullish Signal" or "Intraday Bearish Signal" as the condition. Configure notifications (e.g., SMS, email, or TradingView alerts). Manual VWAP Check:VWAP is plotted as a blue line. Verify that the price is above VWAP for bullish signals or below for bearish signals using the table or chart. To make VWAP a mandatory filter, uncomment the VWAP conditions in the bull_signal and bear_signal definitions.
Pine Script®指標
由SDTA提供
MAMA [DCAUT]█ MAMA (MESA Adaptive Moving Average) 📊 OVERVIEW The MESA Adaptive Moving Average (MAMA) represents an advanced implementation of John F. Ehlers' adaptive moving average system using the Hilbert Transform Discriminator. This indicator automatically adjusts to market cycles, providing superior responsiveness compared to traditional fixed-period moving averages while maintaining smoothness. MAMA dynamically calculates two lines: the fast-adapting MAMA line and the following FAMA (Following Adaptive Moving Average) line. The system's core strength lies in its ability to automatically detect and adapt to the dominant market cycle, reducing lag during trending periods while providing stability during consolidation phases. 🎯 CORE CONCEPTS Signal Interpretation: • MAMA above FAMA: Indicates bullish trend momentum with the fast line leading upward movement • MAMA below FAMA: Suggests bearish trend momentum with the fast line leading downward movement • Golden Cross: MAMA crossing above FAMA signals potential upward momentum shift • Death Cross: MAMA crossing below FAMA indicates potential downward momentum shift • Line Convergence: MAMA and FAMA approaching each other suggests trend consolidation or potential reversal Primary Applications: • Trend Following: Enhanced responsiveness to trend changes compared to traditional moving averages • Crossover Signals: MAMA/FAMA crossovers for identifying potential entry and exit points • Cycle Analysis: Automatic adaptation to market's dominant cycle characteristics • Reduced Lag: Minimized delay in trend detection while maintaining signal smoothness 📐 MATHEMATICAL FOUNDATION Hilbert Transform Discriminator Technology: The MAMA system employs John F. Ehlers' Hilbert Transform Discriminator, a sophisticated signal processing technique borrowed from telecommunications engineering. The Hilbert Transform creates a complex representation of the price series by generating a 90-degree phase-shifted version of the original signal, enabling precise cycle measurement. The discriminator analyzes the instantaneous phase relationships between the original price series and its Hilbert Transform counterpart. This mathematical relationship reveals the dominant cycle period present in the market data at each point in time, forming the foundation for adaptive smoothing. Instantaneous Period Calculation: The algorithm computes the instantaneous period using the arctangent of the ratio between the Hilbert Transform and the original price series. This calculation produces a real-time measurement of the market's dominant cycle, typically ranging from short-term noise cycles to longer-term trend cycles. The instantaneous period measurement undergoes additional smoothing to prevent erratic behavior from single-bar anomalies. This smoothed period value becomes the basis for calculating the adaptive alpha coefficient that controls the moving average's responsiveness. Dynamic Alpha Coefficient System: The adaptive alpha calculation represents the core mathematical innovation of MAMA. The alpha coefficient is derived from the instantaneous period measurement and constrained within the user-defined fast and slow limits. The mathematical relationship converts the measured cycle period into an appropriate smoothing factor: shorter detected cycles result in higher alpha values (increased responsiveness), while longer cycles produce lower alpha values (increased stability). This creates an automatic adaptation mechanism that responds to changing market conditions. MAMA/FAMA Calculation Process: The MAMA line applies the dynamically calculated alpha coefficient to an exponential moving average formula: MAMA = alpha × Price + (1 - alpha) × MAMA . The FAMA line then applies a secondary smoothing operation to the MAMA line, creating a following average that provides confirmation signals. This dual-line approach ensures that the fast-adapting MAMA line captures trend changes quickly, while the FAMA line offers a smoother confirmation signal, reducing the likelihood of acting on temporary price fluctuations. Cycle Detection Mechanism: The underlying cycle detection employs quadrature components derived from the Hilbert Transform to measure both amplitude and phase characteristics of price movements. This allows the system to distinguish between genuine trend changes and temporary price noise, automatically adjusting the smoothing intensity accordingly. The mathematical framework ensures that during strong trending periods with clear directional movement, the algorithm reduces smoothing to minimize lag. Conversely, during consolidation phases with mixed signals, increased smoothing helps filter out false breakouts and whipsaws. 📋 PARAMETER CONFIGURATION Source Selection Strategy: • HL2 (High+Low)/2 (Default): Recommended for cycle analysis as it represents the midpoint of each period's trading range, reducing impact of opening gaps and closing spikes • Close Price: Traditional choice reflecting final market sentiment, suitable for end-of-day analysis • HLC3 (High+Low+Close)/3: Balanced approach incorporating range information with closing emphasis • OHLC4 (Open+High+Low+Close)/4: Most comprehensive price representation for complete market view Fast Limit Configuration (Default 0.5): Controls the maximum responsiveness of the adaptive system. Higher values increase sensitivity to recent price changes but may introduce more noise. This parameter sets the upper bound for the dynamic alpha calculation. Slow Limit Configuration (Default 0.05): Determines the minimum responsiveness, providing stability during uncertain market conditions. Lower values increase smoothing but may cause delayed signals. This parameter sets the lower bound for the dynamic alpha calculation. Parameter Relationship Considerations: The fast and slow limits work together to define the adaptive range. The wider the range between these limits, the more dramatic the adaptation between trending and consolidating market conditions. Different market characteristics may benefit from different parameter configurations, requiring individual testing and validation. 📊 COLOR CODING SYSTEM Line Visualization: • Green Line (MAMA): The fast-adapting moving average that responds quickly to price changes • Red Line (FAMA): The following adaptive moving average that provides confirmation signals The fixed color scheme provides consistent visual identification of each line, enabling clear differentiation between the fast-adapting MAMA and the following FAMA throughout all market conditions. 💡 CORE VALUE PROPOSITION Advantages Over Traditional Moving Averages: • Cycle Adaptation: Automatically adjusts to market's dominant cycle rather than using fixed periods • Reduced Lag: Faster response to genuine trend changes while filtering market noise • Mathematical Foundation: Based on advanced signal processing techniques from telecommunications engineering • Dual-Line System: Provides both fast adaptation (MAMA) and confirmation (FAMA) in one indicator Comparative Performance Characteristics: Unlike fixed-period moving averages that apply the same smoothing regardless of market conditions, MAMA adapts its behavior based on current market cycle characteristics. This may help reduce whipsaws during consolidation periods while maintaining responsiveness during trending phases. Usage Considerations: This indicator is designed for technical analysis purposes. The adaptive nature means that parameter optimization should consider the specific characteristics of the asset and timeframe being analyzed. Like all technical indicators, MAMA should be used as part of a comprehensive analysis approach rather than as a standalone signal generator. Alert Functionality: The indicator includes alert conditions for MAMA/FAMA crossovers, enabling automated notification of potential momentum shifts. These alerts can assist in timing analysis but should be combined with other forms of market analysis for decision-making purposes.
Pine Script®指標
由DCAUT提供
Parabolic SAR BY CARLOZ🔹 What is the Parabolic SAR? The Parabolic SAR (developed by Welles Wilder) is a trend-following indicator used to identify potential entry and exit points in the market. 🔹 What does “SAR” mean? SAR = Stop And Reverse. It suggests where to place a stop loss and also indicates when to reverse a position (from long to short or short to long). 🔹 How does it look on the chart? It appears as a series of dots above or below the price: Dots below price → bullish signal (uptrend). Dots above price → bearish signal (downtrend).
Pine Script®指標
由c4rlosmontoya提供
🐬TSI_ShadowAdded the following features to the original TSI Shadow indicator by Daveatt - Candle color on/off => Displays the current trend status by coloring the chart candles. - Background color on/off => Displays the current trend status by coloring the chart background. - Conservative signal processing based on the zero line on/off => When calculating the trend with the TSI, a bullish trend is only confirmed above the zero line, and a bearish trend is only confirmed below the zero line. - Conservative signal processing based on full signal alignment on/off => This enhances the original trend calculation (bullish when TSI and Fast MA are above Slow MA). With this option, the trend is determined by the specific alignment of all three lines: TSI, Fast MA, and Slow MA. 기존 Daveatt 유저가 개발한 TSI Shadow 에서 아래 기능을 추가 하였습니다. - 캔들 색상 on/off => 캔들에 추세의 상태를 색상으로 나타냅니다. - 배경 색상 on/off => 배경에 추세의 상태를 색상으로 나타냅니다. - 0선 기준으로 신호 발생 보수적 처리 on/off => TSI로 추세를 계산할 때 0선 위에서는 매수추세, 0선 아래서는 매도추세를 계산합니다. - 전체 배열 신호 발생 보수적 처리 on/off => TSI선과, FastMA 선이 SlowMA 위에 있을때 상승추세, 반대면 하락추세를 나타내 주던 계산식에서 TSI-FastMA-SlowMA 세가지 선의 배열 상태로 추세를 나타냅니다.
Pine Script®指標
由BossOfDolphinGang_提供
Adaptive HMA SignalsAdaptive HMA Signals This indicator pairs nicely with the Contrarian 100 MA and can be located here: Overview The "Adaptive HMA Signals" indicator is a sophisticated technical analysis tool designed for traders aiming to capture trend changes with precision. By leveraging Hull Moving Averages (HMAs) that adapt dynamically to market conditions (volatility or volume), this indicator generates actionable buy and sell signals based on price interactions with adaptive HMAs and slope analysis. Optimized for daily charts, it is highly customizable and suitable for trading forex, stocks, cryptocurrencies, or other assets. The indicator is ideal for swing traders and trend followers seeking to time entries and exits effectively. How It Works The indicator uses two adaptive HMAs—a primary HMA and a minor HMA—whose periods adjust dynamically based on user-selected market conditions (volatility via ATR or volume via RSI). It calculates the slope of the primary HMA to identify trend strength and generates exit signals when the price crosses the minor HMA under specific slope conditions. Signals are plotted as circles above or below the price, with inverted colors (white for buy, blue for sell) to enhance visibility on any chart background. Key Components Adaptive HMAs: Two HMAs (primary and minor) with dynamic periods that adjust based on volatility (ATR-based) or volume (RSI-based) conditions. Periods range between user-defined minimum and maximum values, adapting by a fixed percentage (3.141%). Slope Analysis: Calculates the slope of the primary HMA over a 34-bar period to gauge trend direction and strength, normalized using market range data. Signal Logic: Generates buy signals (white circles) when the price falls below the minor HMA with a flat or declining slope (indicating a potential trend reversal) and sell signals (blue circles) when the price rises above the minor HMA with a flat or rising slope. Signal Visualization: Plots signals at an offset based on ATR for clarity, using semi-transparent colors to avoid chart clutter. Mathematical Concepts Dynamic Period Adjustment: Primary HMA period adjusts between minLength (default: 144) and maxLength (default: 200). Minor HMA period adjusts between minorMin (default: 55) and minorMax (default: 89). Periods decrease by 3.141% under high volatility/volume and increase otherwise. HMA Calculation: Uses the Hull Moving Average formula: WMA(2 * WMA(src, length/2) - WMA(src, length), sqrt(length)). Provides a smoother, faster-responding moving average compared to traditional MAs. Slope Calculation: Computes the slope of the primary HMA using a 34-bar period, normalized by the market range (highest high - lowest low over 34 bars). Slope angle is converted to degrees using arccosine for intuitive trend strength interpretation. Signal Conditions: Buy: Slope ≥ 17° (flat or rising), price < minor HMA, low volatility/volume. Sell: Slope ≤ -17° (flat or declining), price > minor HMA, low volatility/volume. Signals are triggered only on confirmed bars to avoid repainting. Entry and Exit Rules Buy Signal (White Circle): Triggered when the price crosses below the minor HMA, the slope of the primary HMA is flat or rising (≥17°), and volatility/volume is low. The signal appears as a white circle above the price bar, offset by 0.72 * ATR(5). Sell Signal (Blue Circle): Triggered when the price crosses above the minor HMA, the slope of the primary HMA is flat or declining (≤-17°), and volatility/volume is low. The signal appears as a blue circle below the price bar, offset by 0.72 * ATR(5). Exit Rules: Exit a buy position on a sell signal and vice versa. Combine with other tools (e.g., support/resistance, RSI) for additional confirmation. Always apply proper risk management. Recommended Usage The "Adaptive HMA Signals" indicator is optimized for daily charts but can be adapted to other timeframes (e.g., 1H, 4H) with adjustments to period lengths. It performs best in trending or range-bound markets with clear reversal points. Traders should: Backtest the indicator on their chosen asset and timeframe to validate signal reliability. Combine with other technical tools (e.g., trendlines, Fibonacci retracements) for stronger trade setups. Adjust minLength, maxLength, minorMin, and minorMax based on market volatility and timeframe. Use the Charger input to toggle between volatility (ATR) and volume (RSI) adaptation for optimal performance in specific market conditions. Customization Options Source: Choose the price source (default: close). Show Signals: Toggle visibility of buy/sell signals (default: true). Charger: Select adaptation trigger—Volatility (ATR-based) or Volume (RSI-based) (default: Volatility). Main HMA Periods: Set minimum (default: 144) and maximum (default: 200) periods for the primary HMA. Minor HMA Periods: Set minimum (default: 55) and maximum (default: 89) periods for the minor HMA. Slope Period: Fixed at 34 bars for slope calculation, adjustable via code if needed. Why Use This Indicator? The "Adaptive HMA Signals" indicator combines the responsiveness of HMAs with dynamic adaptation to market conditions, offering a robust tool for identifying trend reversals. Its clear visual signals, customizable periods, and adaptive logic make it versatile for various markets and trading styles. Whether you’re a beginner or an experienced trader, this indicator enhances your ability to time entries and exits with precision. Tips for Users Test the indicator thoroughly on your chosen market and timeframe to optimize settings (e.g., adjust period lengths for non-daily charts). Use in conjunction with price action or other indicators (e.g., RSI, MACD) for stronger trade confirmation. Monitor volatility/volume conditions to ensure the Charger setting aligns with market dynamics. Ensure your chart timeframe aligns with the selected period lengths for accurate signal generation. Apply strict risk management to protect against false signals in choppy markets. Happy trading with the Adaptive HMA Signals indicator! Share your feedback and strategies in the TradingView community!
Pine Script®指標
由chuckaschultz提供
MAs+Engulfing O caminho das Criptos This indicator overlays multiple moving averages (EMAs 20/50/100/200 and SMA 200) and highlights bullish/bearish engulfing candles by dynamically coloring the candle body. When a bullish engulfing is detected, the candle appears as a strong dark green; for bearish engulfing, a more vivid red. Normal candles keep classic lime/red colors. Visual alerts and bar coloring make price-action patterns instantly visible. Includes built-in alert conditions for both patterns, supporting both trading automation and education. The tool upgrades trend-following setups by combining structure with automatic price action insights. Este indicador combina médias móveis (EMAs de 20/50/100/200 e SMA 200) com detecção de engolfo de alta/baixa, colorindo o candle automaticamente: engolfo de alta com verde escuro, engolfo de baixa com vermelho destacado. Inclui alertas automáticos para ambos os padrões, perfeito para análise visual, estratégia, ou ensino.
Pine Script®指標
由igorfreitasnf提供
Trend TraderThe Trend Trader indicator is a trend-following tool based on a triple EMA (Exponential Moving Average) setup designed to help traders identify market direction and potential reversal zones. It plots three customizable EMAs on the chart to highlight bullish and bearish momentum, then generates trade signals when price shows a strong likelihood of continuing in the direction of the prevailing trend. EMA Alignment: The indicator checks for bullish stacking (fast EMA above medium, medium above slow) and bearish stacking (fast EMA below medium, medium below slow). This alignment defines the prevailing market trend. Trend Validation: A user-defined lookback period ensures signals are only taken if the market recently displayed a stacked trend, thus filtering false entries during consolidations. Signal Generation: Buy signals appear when price dips into the zone between the fast and medium EMAs during a bullish trend. Sell signals appear when price rallies into the zone between the fast and medium EMAs during a bearish trend. Alerts: Built-in alerts notify traders of new trade opportunities without having to constantly watch the chart. This indicator is suitable for swing trading and intraday strategies across multiple markets, including forex, stocks, indices, and crypto. Suggested Strategy for Profitability This tool is best used as part of a structured trend-trading plan. Below is a suggested framework: Entry Rules Long (Buy Trade): Confirm that EMA alignment is bullish (EMA1 > EMA2 > EMA3). Wait for a Buy Signal (triangle up below price). Ensure the higher timeframe (e.g., 4H if trading 1H) trend is also bullish to filter trades. Short (Sell Trade): Confirm EMA alignment is bearish (EMA1 < EMA2 < EMA3). Wait for a Sell Signal (triangle down above price). Higher timeframe should also be bearish to increase probability. Stop Loss For long positions, place the stop loss just below EMA3 or the most recent swing low. For short positions, place the stop loss just above EMA3 or the most recent swing high. Take Profit Conservative: Set TP at 1.5x to 2x the stop loss distance. Aggressive: Trail stop loss below EMA2 (for longs) or above EMA2 (for shorts) to capture larger trends. Risk Management Use no more than 1–2% of account risk per trade. Trade only when the signal aligns with overall market context (higher timeframe, support/resistance, or volume confirmation). This indicator is very similar to the indicator "Trend Scalper" by the same developer, the difference is this indicator is used to just find the trade and hold the trade or to find the reversal of a trend instead of triggering alerts every time price enters between EMA1 and EMA2.
Pine Script®指標
由abedmahmood提供
3MA/EMA Alerts指标名称（中文/英文） 中文名：多均线趋势指标（带上穿与金叉提醒） 英文名：Multi MA/EMA Trend Indicator (with Price & Golden Cross Alerts) 指标功能介绍（中文） 多均线趋势指标（带上穿与金叉提醒） 是一个可自定义的均线工具，适用于趋势分析和交易信号提醒。 核心功能： 多均线显示 默认显示 EMA20，EMA80/200 可选择显示 每条均线可独立选择 EMA 或 SMA 自定义颜色和线宽 价格上穿均线提醒 当价格向上突破任意开启的均线时触发提醒 可用于捕捉短线趋势启动点 金叉提醒 当短期均线向上穿过中长期均线时触发提醒 可用于捕捉潜在的趋势反转或加速 中文 UI 参数和提醒信息均为中文，便于快速理解和使用 适用场景 趋势确认 趋势反转捕捉 短线入场和长期持仓参考 Indicator Description (English) Multi MA/EMA Trend Indicator (with Price & Golden Cross Alerts) is a customizable moving average tool for trend analysis and trading alerts. Key Features: Multiple Moving Averages Default display: EMA20; EMA80/200 optional Each MA can be set as EMA or SMA individually Customizable colors and line widths Price Cross Alerts Alerts when price crosses above any active MA Helps identify short-term trend initiation points Golden Cross Alerts Alerts when a short-term MA crosses above a mid/long-term MA Useful for detecting trend acceleration or reversal signals User-Friendly Interface Parameters and alerts are labeled in Chinese (can be translated) Applications Trend confirmation Trend reversal detection Short-term entries and long-term position guidance
Pine Script®指標
由jlysqs提供
PSAR+EMA+Hull+BBDescription This all-in-one indicator combines four proven tools: Parabolic SAR (Everget) — trend direction and potential reversals. Exponential Moving Averages (20/50/100/200) — customizable lengths, colors, and offsets. Hull Suite (InSilico) — smooth trend detection with multiple variations (HMA, THMA, EHMA). Bollinger Bands — volatility and dynamic support/resistance. Features Toggle each module on/off in settings. Fully configurable inputs (lengths, colors, offsets, multipliers). Optional PSAR labels, highlights, and state fill. Hull can color candles, draw band fills, and pull from higher timeframes. Bollinger Bands include multiple basis types, stdev multipliers, and fill transparency. Built-in alerts: PSAR direction change, Hull trending up/down. Category Trend Analysis (with Volatility as secondary).
Pine Script®指標
由Nochances提供
Bollinger Bands with 4 Moving AveragesCombines Bollinger Bands (BB) with up to four optional Moving Averages (MA) to read volatility, trend direction, and dynamic support–resistance in one overlay. How It Works BB: basis = MA(length, type) with standard deviation mult. upper = basis + dev, lower = basis − dev. MA1–MA4: additional averages you can toggle (default only MA4/200 enabled). Key Features Flexible basis MA type for BB: SMA / EMA / RMA (Wilder) / WMA / VWMA. Four optional MAs with independent length, color, and width (defaults: 7, 25, 99, 200; only 200 on by default). Offset to shift BB for visual testing. Overlay on price with shaded band between Upper–Lower. Inputs & Defaults BB Length = 20, StdDev = 2.0, Source = close. Basis MA Type = SMA. MA4 active (200), MA1–MA3 off (7/25/99 ready). Offset = 0. Practical Use Use BB for volatility context: squeeze → potential breakout; expansion → strong trend. Treat Basis / Upper / Lower as dynamic levels: Pullbacks to Basis often become decision zones in trends. Upper/Lower touches = relative extremes. Add MA4(200) for primary bias; enable MA1–MA3 for finer timing. Typical behavior: Price > MA200 and rising basis → bullish bias; watch pullbacks to basis/MA25-like zones. Price < MA200 and falling basis → bearish bias; watch rejections at basis/MAs. Common Signals (not financial advice) Breakout + BB expansion confirms momentum. Squeeze + basis break can preface volatility expansion. Confluence: Lower touch + fast MA in uptrends → mean-reversion setups; inverse for downtrends. Notes MA1–MA4 are SMA in the code; BB basis follows the selected MA type. Test across timeframes; tune length and mult to the asset. Disclaimer Visual tool only. Combine with risk management, multi-timeframe confirmation, and a tested plan.
Pine Script®指標
由rahmadsaleh86提供
Delta Volume Signals by Claudio [hapharmonic]Modifications: Percentages without decimals. I replaced the 'Current Volume' row with two boxes: "Δ Vol" and its value, which changes color depending on the direction of the bearish/bullish candle. Signals can change color in the settings. Box spacing so the table doesn't constantly change size. To be modified: The Net Volume sign shouldn't change to negative when the candle is red. If anyone does this, let me know... claudio.ventola@hotmail.com Best regards!
Pine Script®指標
由claudiogabrielventola提供
Volume Delta Volume Signals by Claudio [hapharmonic]// This Pine Script™ code is subject to the terms of the Mozilla Public License 2.0 at mozilla.org // © hapharmonic //@version=6 FV = format.volume FP = format.percent indicator('Volume Delta Volume Signals by Claudio ', format = FV, max_bars_back = 4999, max_labels_count = 500) //------------------------------------------ // Settings | //------------------------------------------ bool usecandle = input.bool(true, title = 'Volume on Candles',display=display.none) color C_Up = input.color(#12cef8, title = 'Volume Buy', inline = ' ', group = 'Style') color C_Down = input.color(#fe3f00, title = 'Volume Sell', inline = ' ', group = 'Style') // ✅ Nueva entrada para colores de señales color buySignalColor = input.color(color.new(color.green, 0), "Buy Signal Color", group = "Signals") color sellSignalColor = input.color(color.new(color.red, 0), "Sell Signal Color", group = "Signals") string P_ = input.string(position.top_right,"Position",options = , group = "Style",display=display.none) string sL = input.string(size.small , 'Size Label', options = , group = 'Style',display=display.none) string sT = input.string(size.normal, 'Size Table', options = , group = 'Style',display=display.none) bool Label = input.bool(false, inline = 'l') History = input.bool(true, inline = 'l') // Inputs for EMA lengths and volume confirmation bool MAV = input.bool(true, title = 'EMA', group = 'EMA') string volumeOption = input.string('Use Volume Confirmation', title = 'Volume Option', options = , group = 'EMA',display=display.none) bool useVolumeConfirmation = volumeOption == 'none' ? false : true int emaFastLength = input(12, title = 'Fast EMA Length', group = 'EMA',display=display.none) int emaSlowLength = input(26, title = 'Slow EMA Length', group = 'EMA',display=display.none) int volumeConfirmationLength = input(6, title = 'Volume Confirmation Length', group = 'EMA',display=display.none) string alert_freq = input.string(alert.freq_once_per_bar_close, title="Alert Frequency", options= ,group = "EMA", tooltip="If you choose once_per_bar, you will receive immediate notifications (but this may cause interference or indicator repainting). However, if you choose once_per_bar_close, it will wait for the candle to confirm the signal before notifying.",display=display.none) //------------------------------------------ // UDT_identifier | //------------------------------------------ type OHLCV float O = open float H = high float L = low float C = close float V = volume type VolumeData float buyVol float sellVol float pcBuy float pcSell bool isBuyGreater float higherVol float lowerVol color higherCol color lowerCol //------------------------------------------ // Calculate volumes and percentages | //------------------------------------------ calcVolumes(OHLCV ohlcv) => var VolumeData data = VolumeData.new() data.buyVol := ohlcv.V * (ohlcv.C - ohlcv.L) / (ohlcv.H - ohlcv.L) data.sellVol := ohlcv.V - data.buyVol data.pcBuy := data.buyVol / ohlcv.V * 100 data.pcSell := 100 - data.pcBuy data.isBuyGreater := data.buyVol > data.sellVol data.higherVol := data.isBuyGreater ? data.buyVol : data.sellVol data.lowerVol := data.isBuyGreater ? data.sellVol : data.buyVol data.higherCol := data.isBuyGreater ? C_Up : C_Down data.lowerCol := data.isBuyGreater ? C_Down : C_Up data //------------------------------------------ // Get volume data | //------------------------------------------ ohlcv = OHLCV.new() volData = calcVolumes(ohlcv) // Plot volumes and create labels plot(ohlcv.V, color=color.new(volData.higherCol, 90), style=plot.style_columns, title='Total',display = display.all - display.status_line) plot(ohlcv.V, color=volData.higherCol, style=plot.style_stepline_diamond, title='Total2', linewidth = 2,display = display.pane) plot(volData.higherVol, color=volData.higherCol, style=plot.style_columns, title='Higher Volume', display = display.all - display.status_line) plot(volData.lowerVol , color=volData.lowerCol , style=plot.style_columns, title='Lower Volume',display = display.all - display.status_line) S(D,F)=>str.tostring(D,F) volStr = S(math.sign(ta.change(ohlcv.C)) * ohlcv.V, FV) buyVolStr = S(volData.buyVol , FV ) sellVolStr = S(volData.sellVol , FV ) // ✅ MODIFICACIÓN: Porcentaje sin decimales buyPercentStr = str.tostring(math.round(volData.pcBuy)) + " %" sellPercentStr = str.tostring(math.round(volData.pcSell)) + " %" totalbuyPercentC_ = volData.buyVol / (volData.buyVol + volData.sellVol) * 100 sup = not na(ohlcv.V) if sup TC = text.align_center CW = color.white var table tb = table.new(P_, 6, 6, bgcolor = na, frame_width = 2, frame_color = chart.fg_color, border_width = 1, border_color = CW) tb.cell(0, 0, text = 'Volume Candles', text_color = #FFBF00, bgcolor = #0E2841, text_halign = TC, text_valign = TC, text_size = sT) tb.merge_cells(0, 0, 5, 0) tb.cell(0, 1, text = 'Current Volume', text_color = CW, bgcolor = #0B3040, text_halign = TC, text_valign = TC, text_size = sT) tb.merge_cells(0, 1, 1, 1) tb.cell(0, 2, text = 'Buy', text_color = #000000, bgcolor = #92D050, text_halign = TC, text_valign = TC, text_size = sT) tb.cell(1, 2, text = 'Sell', text_color = #000000, bgcolor = #FF0000, text_halign = TC, text_valign = TC, text_size = sT) tb.cell(0, 3, text = buyVolStr, text_color = CW, bgcolor = #074F69, text_halign = TC, text_valign = TC, text_size = sT) tb.cell(1, 3, text = sellVolStr, text_color = CW, bgcolor = #074F69, text_halign = TC, text_valign = TC, text_size = sT) tb.cell(0, 5, text = 'Net: ' + volStr, text_color = CW, bgcolor = #074F69, text_halign = TC, text_valign = TC, text_size = sT) tb.merge_cells(0, 5, 1, 5) tb.cell(0, 4, text = buyPercentStr, text_color = CW, bgcolor = #074F69, text_halign = TC, text_valign = TC, text_size = sT) tb.cell(1, 4, text = sellPercentStr, text_color = CW, bgcolor = #074F69, text_halign = TC, text_valign = TC, text_size = sT) cellCount = 20 filledCells = 0 for r = 5 to 1 by 1 for c = 2 to 5 by 1 if filledCells < cellCount * (totalbuyPercentC_ / 100) tb.cell(c, r, text = '', bgcolor = C_Up) else tb.cell(c, r, text = '', bgcolor = C_Down) filledCells := filledCells + 1 filledCells if Label sp = ' ' l = label.new(bar_index, ohlcv.V, text=str.format('Net: {0} Buy: {1} ({2}) Sell: {3} ({4}) {5}/\ {5}l {5}l', volStr, buyVolStr, buyPercentStr, sellVolStr, sellPercentStr, sp), style=label.style_none, textcolor=volData.higherCol, size=sL, textalign=text.align_left) if not History (l ).delete() //------------------------------------------ // Draw volume levels on the candlesticks | //------------------------------------------ float base = na,float value = na bool uc = usecandle and sup if volData.isBuyGreater base := math.min(ohlcv.O, ohlcv.C) value := base + math.abs(ohlcv.O - ohlcv.C) * (volData.pcBuy / 100) else base := math.max(ohlcv.O, ohlcv.C) value := base - math.abs(ohlcv.O - ohlcv.C) * (volData.pcSell / 100) barcolor(sup ? color.new(na, na) : ohlcv.C < ohlcv.O ? color.red : color.green,display = usecandle? display.all:display.none) UseC = uc ? volData.higherCol:color.new(na, na) plotcandle(uc?base:na, uc?base:na, uc?value:na, uc?value:na, title='Body', color=UseC, bordercolor=na, wickcolor=UseC, display = usecandle ? display.all - display.status_line : display.none, force_overlay=true,editable=false) plotcandle(uc?ohlcv.O:na, uc?ohlcv.H:na, uc?ohlcv.L:na, uc?ohlcv.C:na, title='Fill', color=color.new(UseC,80), bordercolor=UseC, wickcolor=UseC, display = usecandle ? display.all - display.status_line : display.none, force_overlay=true,editable=false) //------------------------------------------------------------ // Plot the EMA and filter out the noise with volume control. | //------------------------------------------------------------ float emaFast = ta.ema(ohlcv.C, emaFastLength) float emaSlow = ta.ema(ohlcv.C, emaSlowLength) bool signal = emaFast > emaSlow color c_signal = signal ? C_Up : C_Down float volumeMA = ta.sma(ohlcv.V, volumeConfirmationLength) bool crossover = ta.crossover(emaFast, emaSlow) bool crossunder = ta.crossunder(emaFast, emaSlow) isVolumeConfirmed(source, length, ma) => math.sum(source > ma ? source : 0, length) >= math.sum(source < ma ? source : 0, length) bool ISV = isVolumeConfirmed(ohlcv.V, volumeConfirmationLength, volumeMA) bool crossoverConfirmed = crossover and (not useVolumeConfirmation or ISV) bool crossunderConfirmed = crossunder and (not useVolumeConfirmation or ISV) PF = MAV ? emaFast : na PS = MAV ? emaSlow : na p1 = plot(PF, color = c_signal, editable = false, force_overlay = true, display = display.pane) plot(PF, color = color.new(c_signal, 80), linewidth = 10, editable = false, force_overlay = true, display = display.pane) plot(PF, color = color.new(c_signal, 90), linewidth = 20, editable = false, force_overlay = true, display = display.pane) plot(PF, color = color.new(c_signal, 95), linewidth = 30, editable = false, force_overlay = true, display = display.pane) plot(PF, color = color.new(c_signal, 98), linewidth = 45, editable = false, force_overlay = true, display = display.pane) p2 = plot(PS, color = c_signal, editable = false, force_overlay = true, display = display.pane) plot(PS, color = color.new(c_signal, 80), linewidth = 10, editable = false, force_overlay = true, display = display.pane) plot(PS, color = color.new(c_signal, 90), linewidth = 20, editable = false, force_overlay = true, display = display.pane) plot(PS, color = color.new(c_signal, 95), linewidth = 30, editable = false, force_overlay = true, display = display.pane) plot(PS, color = color.new(c_signal, 98), linewidth = 45, editable = false, force_overlay = true, display = display.pane) fill(p1, p2, top_value=crossover ? emaFast : emaSlow, bottom_value =crossover ? emaSlow : emaFast, top_color =color.new(c_signal, 80), bottom_color =color.new(c_signal, 95) ) // ✅ Usar colores configurables para señales plotshape(crossoverConfirmed and MAV, style=shape.triangleup , location=location.belowbar, color=buySignalColor , size=size.small, force_overlay=true,display =display.pane) plotshape(crossunderConfirmed and MAV, style=shape.triangledown, location=location.abovebar, color=sellSignalColor, size=size.small, force_overlay=true,display =display.pane) string msg = '--------- '+"Buy volume ="+buyVolStr+" Buy Percent = "+buyPercentStr+" Sell volume = "+sellVolStr+" Sell Percent = "+sellPercentStr+" Net = "+volStr+' ---------' if crossoverConfirmed alert("Price (" + str.tostring(close) + ") Crossed over MA " + msg, alert_freq) if crossunderConfirmed alert("Price (" + str.tostring(close) + ") Crossed under MA " + msg, alert_freq)
Pine Script®指標
由claudiogabrielventola提供
Flat Day PredictorAdvanced technical indicator that predicts low-volatility "flat" trading days using multi-factor analysis. Designed for day traders and scalpers who need to identify when markets are likely to trade sideways. Key Features: Real-time flat day probability calculation (0-100%) 8-factor scoring system combining volatility, volume, and momentum indicators Visual table displaying all indicator values and overall signal strength Color-coded alerts for high-probability flat day signals Works on all timeframes, optimized for intraday trading Indicators Analyzed: VIX volatility levels Bollinger Band width compression RSI momentum neutrality ATR trend declining Volume below average Daily range percentage Price action patterns Market regime detection Signal Levels: 75%+ = VERY HIGH flat probability (Red alert) 62-74% = HIGH flat probability (Orange) 50-61% = MODERATE flat probability (Yellow) Below 50% = Trending day likely (Green) Usage: Add to any chart and monitor the probability percentage. Higher scores indicate increased likelihood of sideways price action. Use for position sizing, strategy selection, and risk management during low-volatility periods.
Pine Script®指標
由PaydaySOL提供
EMA KitEMA Kit delivers multiple 1D EMA's wrapped into a single indicator. I was annoyed with having a bunch of EMA indicators on the left side of my chart for each individual EMA I rely on, so I created a single indicator with all of them. This EMA kit allows you to select any combination of the following EMA's: 3D, 5D, 8D, 21D, 34D, 50D, 100D, 200D, and 200W. They are all based on the 1D timeframe regardless of the timeframe you're currently viewing on your chart - for example, if you toggle from a Daily chart to a 15 minute chart, the EMA's won't change to reflect the 15 minute timeframe. EMA Kit smoothes the lines to prevent staggering on lower timeframes. You can change the color scheme and line thickness and even toggle between different line types like area, histogram, etc. You also have the option to turn end-of-line price labels on/off. Current price level for each EMA is highlighted on the price scale.
Pine Script®指標
由Makin_Bacon提供
EMA/SMA Market Indicator V1 (Situational Awareness Uptrend)Red condition (highest priority in code) Background = red if any of these are true: Close < 10MA OR Close < 20MA OR (10MA and 20MA slopes ≤ threshold → “flat/down”) Green condition (only if not red) Background = green if: (Close > 10MA or Close > 20MA) AND Close > 50MA Otherwise = nothing (transparent) If neither red nor green is true → background is off. So when is there no background? Close is not below 10MA Close is not below 20MA MAs are not both flat/down AND the price fails the “green test” (ex. under 50MA, or not above 10/20).
Pine Script®指標
由rienohtrade提供