立即開始

指標和策略

Svl - Trading SystemPrice can tell lies but volume cannot, so keeping this in mind I have created this indicator in which you see sell order block and buy order block on the basis of price action + volume through which we execute our trade First of all, let us know its core concepts and logic, which will help you in taking the right decisions in it. core concept of the " Svl - Trading System " TradingView indicator is based on professional price action, volume, and swing structure. This indicator smartly gives real-time insights of important price turning points, reversal zones, and trend continuation. Its deep explanation is given below. Edit - default swing length -5 , change according your nature , tested With 7 For 5 minute timeframe Core Concept: 1. Swing Structure Detection The indicator automatically detects swing highs (HH/LH) and swing lows (HL/LL) on the chart. HH: Higher High HL: Higher Low LH: Lower High LL: Lower Low These swings are the backbone of price action – signaling a change in trend, a bounce, reversal or trend continuation. 2. Order Block (OB) Mapping Buy Order Block (Buy OB): When the indicator detects the HL/LL swing, we declare Buy OB, the lowest point of the swing. Sell ​​Order Block (Sell OB): On HH/LH swing, the highest point of our swing is called Sell OB. Order Blocks are those important zones of price where historically price has reacted strongly – where major clusters of buyers/sellers are located in the market. 3. Volume Analysis (Optional Dashboard/Barcolor) The candle color depends on the volume ranking on the chart (most high/low, normal, pressure blue shade). Highest/lowest volume candles are a special highlight, which helps to spot liquidity spikes, exhaustion, or big orders. 4. Live Dashboard There is an automated dashboard in the top-right of the chart, which shows this in real-time: Last swing type (HH/HL/LH/LL) Reversal price (last swing level) Swing direction (Bull/Bear/Neutral) Volume, Buy OB, Sell OB, etc. This helps the trader understand the market situation at a glance. 5. Smart Plotting/Labels Buy/Sell are plotted as distinct lines on the OB chart. The Labels option gives clear visual swing points. All calculations are fast and automated – the user does not need to mark manually. This indicator is an advanced, fully-automated price action tool that combines trend, reversal, volume, liquidity and zone detection in one smart system, makes entry/exit decisions objective and error-free, and provides complete trading confidence with a live monitor/dashboard. All of its functions/properties such as: swing detect, OB plot, volume color, dashboard follow best practice for professional chart analysis!
Pine Script®指標
由cnagda3提供
Trend dealing rangeHi all! This indicator will help you find the current dealing range according to the trend. If the trend is bullish the indicator will look for a range between the latest low pivot to the latest high pivot. Vice versa in a bearish trend. The code uses my new library 'FibonacciRetracement' () that has the same code as my other indicator 'Fibonacci retracement' (). It plots 5 lines from the low to the high and labels them 0 %, 25 %, 50 %, 75 % and 100 %. A trendline can be drawn between the two pivots (dashed and gray by default). Firstly you can define the pivot lengths used, this setting is in the 'Market structure' section but it also applies to the dealing range (it defaults to 5 (left) and 2 (right)). You can show prices if you want to (shown in parantheses, off by default). You can change the default labels position (from left) and the font size (12 by default and higher up it's 7 for market structure text). Lastly you can change the alert frequency (defaults to once per bar close) and the price that has to enter a zone for alert to be sent. 'Close' means that the closing price (or current price if you change the alert frequency to all or once per bar) has to be inside the zone and 'Wick' means that the entire candle needs to be inside the zone. It's very useful for traders to find the current dealing range and this indicator will help you to do so. So, this indicator will give you the dealing range and basic market structure through break of structures and change of characters. If you have any input or suggestions on future features or bugs, don't hesitate to let me know! Best of trading luck!
Pine Script®指標
由mickes提供
CM Indicator About Indicator:- 1) This is best Indicator for trend identification. 2) This is based on 42 EMA with Upper Band and Lower bands for trend identification. 3) This should be used for Line Bar chart only. 4) Line bar chart should be used at 1 hour for 15 line breaks. How to Use:- 1) To go with trend is best use of this indicator. 2) This is for stocks and options not for index. Indicator used for Stocks at one hour and options for 10-15 minutes line break. 3) There will be 5% profitability defined for each entry, 3 entries with profit are best posible in same continuous trend 4 and 5th entry is in riskier zone in continuous trend. 4) Loss will only happen if there is trend reversal. 5) Loss could only be one trade of profit out of three profitable trades. 6) Back tested on 200 stocks and 100 options.
Pine Script®指標
由Chhagan_2021提供
TIKOLE SVM Sentiment Combo Oscillator MACD"This one has MACD and RSI. Accuracy is very good. Best for 5-minute and 15-minute timeframes." The script combines MACD-style histogram with RSI logic. It gives high accuracy signals. Works best on 5-minute and 15-minute charts (scalping + intraday). ⚡MACD (fast EMA / slow EMA) into the same script along with your RSI sentiment oscillator, so you’ll get a dual-confirmation system (RSI sentiment + MACD crossover + histogram).
Pine Script®指標
由bosstvs100提供
FVG Fusion – by EB | Smart Money ConceptsFVG Fusion – by EB is an advanced indicator based on Smart Money Concepts (SMC). It automatically detects Fair Value Gaps (FVG) on multiple timeframes, along with key PDH/PDL (Daily Previous) and PWH/PWL (Weekly Previous) levels. 🔹 Key Features Automatic detection of bullish and bearish FVGs Multi-timeframe (M5 to D1) PDH/PDL and PWH/PWL levels with lightning bolts Configurable alerts when tapping on a FVG Customizable colors, thicknesses, and automatic clearing. 💡 Ideal for traders who use Price Action and SMC to identify imbalances and high-probability zones.
Pine Script®指標
由Estefanobaez提供
AltCoin & MemeCoin Index Correlation [Eddie_Bitcoin]🧠 Philosophy of the Strategy The AltCoin & MemeCoin Index Correlation Strategy by Eddie_Bitcoin is a carefully engineered trend-following system built specifically for the highly volatile and sentiment-driven world of altcoins and memecoins. This strategy recognizes that crypto markets—especially niche sectors like memecoins—are not only influenced by individual price action but also by the relative strength or weakness of their broader sector. Hence, it attempts to improve the reliability of trading signals by requiring alignment between a specific coin’s trend and its sector-wide index trend. Rather than treating each crypto asset in isolation, this strategy dynamically incorporates real-time dominance metrics from custom indices (OTHERS.D and MEME.D) and combines them with local price action through dual exponential moving average (EMA) crossovers. Only when both the asset and its sector are moving in the same direction does it allow for trade entries—making it a confluence-based system rather than a single-signal strategy. It supports risk-aware capital allocation, partial exits, configurable stop loss and take profit levels, and a scalable equity-compounding model. ✅ Why did I choose OTHERS.D and MEME.D as reference indices? I selected OTHERS.D and MEME.D because they offer a sector-focused view of crypto market dynamics, especially relevant when trading altcoins and memecoins. 🔹 OTHERS.D tracks the market dominance of all cryptocurrencies outside the top 10 by market cap. This excludes not only BTC and ETH, but also major stablecoins like USDT and USDC, making it a cleaner indicator of risk appetite across true altcoins. 🔹 This is particularly useful for detecting "Altcoin Season"—periods where capital rotates away from Bitcoin and flows into smaller-cap coins. A rising OTHERS.D often signals the start of broader altcoin rallies. 🔹 MEME.D, on the other hand, captures the speculative behavior of memecoin segments, which are often driven by retail hype and social media activity. It's perfect for timing momentum shifts in high-risk, high-reward tokens. By using these indices, the strategy aligns entries with broader sector trends, filtering out noise and increasing the probability of catching true directional moves, especially in phases of capital rotation and altcoin risk-on behavior. 📐 How It Works — Core Logic and Execution Model At its heart, this strategy employs dual EMA crossover detection—one pair for the asset being traded and one pair for the selected market index. A trade is only executed when both EMA crossovers agree on the direction. For example: Long Entry: Coin's fast EMA > slow EMA and Index's fast EMA > slow EMA Short Entry: Coin's fast EMA < slow EMA and Index's fast EMA < slow EMA You can disable the index filter and trade solely based on the asset’s trend just to make a comparison and see if improves a classic EMA crossover strategy. Additionally, the strategy includes: - Adaptive position sizing, based on fixed capital or current equity (compound mode) - Take Profit and Stop Loss in percentage terms - Smart partial exits when trend momentum fades - Date filtering for precise backtesting over specific timeframes - Real-time performance stats, equity tracking, and visual cues on chart ⚙️ Parameters & Customization 🔁 EMA Settings Each EMA pair is customizable: Coin Fast EMA: Default = 47 Coin Slow EMA: Default = 50 Index Fast EMA: Default = 47 Index Slow EMA: Default = 50 These control the sensitivity of the trend detection. A wider spread gives smoother, slower entries; a narrower spread makes it more responsive. 🧭 Index Reference The correlation mechanism uses CryptoCap sector dominance indexes: OTHERS.D: Dominance of all coins EXCLUDING Top 10 ones MEME.D: Dominance of all Meme coins These are dynamically calculated using: OTHERS_D = OTHERS_cap / TOTAL_cap * 100 MEME_D = MEME_cap / TOTAL_cap * 100 You can select: Reference Index: OTHERS.D or MEME.D Or disable the index reference completely (Don't Use Index Reference) 💰 Position Sizing & Risk Management Two capital allocation models are supported: - Fixed % of initial capital (default) - Compound profits, which scales positions as equity grows Settings: - Compound profits?: true/false - % of equity: Between 1% and 200% (default = 10%) This is critical for users who want to balance growth with risk. 🎯 Take Profit / Stop Loss Customizable thresholds determine automatic exits: - TakeProfit: Default = 99999 (disabled) - StopLoss: Default = 5 (%) These exits are percentage-based and operate off the entry price vs. current close. 📉 Trend Weakening Exit (Scale Out) If the position is in profit but the trend weakens (e.g., EMA color signals trend loss), the strategy can partially close a configurable portion of the position: - Scale Position on Weak Trend?: true/false - Scaled Percentage: % to close (default = 65%) This feature is useful for preserving profits without exiting completely. 📆 Date Filter Useful for segmenting performance over specific timeframes (e.g., bull vs bear markets): - Filter Date Range of Backtest: ON/OFF - Start Date and End Date: Custom time range OTHER PARAMETERS EXPLANATION (Strategy "Properties" Tab): - Initial Capital is set to 100 USD - Commission is set to 0.055% (The ones I have on Bybit) - Slippage is set to 3 ticks - Margin (short and long) are set to 0.001% to avoid "overspending" your initial capital allocation 📊 Visual Feedback and Debug Tools 📈 EMA Trend Visualization The slow EMA line is dynamically color-coded to visually display the alignment between the asset trend and the index trend: Lime: Coin and index both bullish Teal: Only coin bullish Maroon: Only index bullish Red: Both bearish This allows for immediate visual confirmation of current trend strength. 💬 Real-Time PnL Labels When a trade closes, a label shows: Previous trade return in % (first value is the effective PL) Green background for profit, Red for losses. 📑 Summary Table Overlay This table appears in a corner of the chart (user-defined) and shows live performance data including: Trade direction (yellow long, purple short) Emojis: 💚 for current profit, 😡 for current loss Total number of trades Win rate Max drawdown Duration in days Current trade profit/loss (absolute and %) Cumulative PnL (absolute and %) APR (Annualized Percentage Return) Each metric is color-coded: Green for strong results Yellow/orange for average Red/maroon for poor performance You can select where this appears: Top Left Top Right Bottom Left Bottom Right (default) 📚 Interpretation of Key Metrics Equity Multiplier: How many times initial capital has grown (e.g., “1.75x”) Net Profit: Total gains including open positions Max Drawdown: Largest peak-to-valley drop in strategy equity APR: Annualized return calculated based on equity growth and days elapsed Win Rate: % of profitable trades PnL %: Percentage profit on the most recent trade 🧠 Advanced Logic & Safety Features 🛑 “Don’t Re-Enter” Filter If a trade is closed due to StopLoss without a confirmed reversal, the strategy avoids re-entering in that same direction until conditions improve. This prevents false reversals and repetitive losses in sideways markets. 🧷 Equity Protection No new trades are initiated if equity falls below initial_capital / 30. This avoids overleveraging or continuing to trade when capital preservation is critical. Keep in mind that past results in no way guarantee future performance. Eddie Bitcoin
Pine Script®策略
由Eddie_Bitcoin提供
Frozen 4H VWAP – Precision AnchoredFrozen 4H VWAP – Precision Anchored Like Ice The Frozen 4H VWAP – Precision Anchored delivers a clean, stable, and reliable view of the 4-hour Volume Weighted Average Price, designed for traders who want higher timeframe insights without intrabar noise or repainting. 🔹 Key Features: Non-Repainting: VWAP value is “frozen” at the close of each 4H candle — no mid-bar updates or flickering. 4H Timeframe Anchoring: Seamlessly pulls 4-hour VWAP values into any timeframe you’re trading on. Clear Trend Reference: Updates only when a new 4H candle begins, acting as a trustworthy anchor for support/resistance. Custom Source Option: Choose from different price sources (default: HLC3) to fit your strategy. Whether you're scalping, day trading, or swing trading, this indicator gives you a powerful edge by grounding your decisions in higher timeframe VWAP data — clear, calm, and frozen in time.
Pine Script®指標
由Equanimity_raven提供
EdgeFlow Pullback [CHE]EdgeFlow Pullback \ — Icon & Visual Guide (Deep Dive) TL;DR (1-minute read) ⏳ Hourglass = Pending verdict. A countdown runs from the signal bar until your Evaluation Window ends. ✔ Checkmark (green) = OK. After the evaluation window, price (HLC3) is on the correct side of the EMA144 for that signal’s direction. ✖ Cross (red) = Fail. After the evaluation window, price (HLC3) is on the wrong side of the EMA144. ▲ / ▼ Triangles = the actual PB Long/Short signal bar (sequence completed in time). Small lime/red crosses = visual markers when HLC3 crosses EMA144 (context, not trade signals). Orange line = EMA144 (baseline/trend filter). T3 line color = Context signal: green when T3 is below HLC3, red when T3 is above HLC3. Icon Glossary (What each symbol means) 1) ⏳ Hourglass — “Pending / Countdown” Appears immediately when a PB signal fires (Long or Short). Shows `⏳ currentBars / EvaluationBars` (e.g., `⏳ 7/30`). The label stays anchored at the signal bar and its original price level (it does not drift with price). During ⏳ you get no verdict yet. It’s simply the waiting period before grading. 2) ✔ Checkmark (green) — “Condition met” Appears after the Evaluation Window completes. Logic: Long signal: HLC3 (typical price) is above EMA144 → ✔ Short signal: HLC3 is below EMA144 → ✔ The label turns green and text says “✔ … Condition met”. This is rules-based grading, not PnL. It tells you if the post-signal structure behaved as expected. 3) ✖ Cross (red) — “Condition failed” Appears after the Evaluation Window completes if the condition above is not met. Label turns red with “✖ … Condition failed”. Again: rules-based verdict, not a guarantee of profit or loss. 4) ▲ “PB Long” triangle (below bar) Marks the exact bar where the 4-step Long sequence completed within the allowed window. That bar is your signal bar for Long setups. 5) ▼ “PB Short” triangle (above bar, red) Same as above, for Short setups. 6) Lime/Red “+” crosses (tiny cross markers) Lime cross (below bar): HLC3 crosses above EMA144 (crossover). Red cross (above bar): HLC3 crosses below EMA144 (crossunder). These crosses are context markers; they’re not entry signals by themselves. The Two Clocks (Don’t mix them up) There are two different time windows at play: 1. Signal Window — “Max bars for full sequence” A pullback signal (Long or Short) only fires if the 4-step sequence completes within this many bars. If it takes too long: reset (no signal, no triangle, no label). Purpose: avoid stale setups. 2. Evaluation Window — “Evaluation window after signal (bars)” Starts after the signal bar. The label shows an ⏳ countdown. When it reaches the set number of bars, the indicator checks whether HLC3 is on the correct side of EMA144 for the signal direction. Then it stamps the signal with ✔ (OK) or ✖ (Fail). Timeline sketch (Long example): ``` → ▲ PB Long at bar t0 Label shows: ⏳ 0/EvalBars t0+1, t0+2, ... t0+EvalBars-1 → still ⏳ At t0+EvalBars → Check HLC3 vs EMA144 Result → ✔ (green) or ✖ (red) (Label remains anchored at t0 / signal price) ``` What Triggers the PB Signal (so you know why triangles appear) LONG sequence (4 steps in order): 1. T3 falling (the pullback begins) 2. HLC3 crosses under EMA144 3. T3 rising (pullback ends) 4. HLC3 crosses over EMA144 → PB Long triangle SHORT sequence (mirror): 1. T3 rising 2. HLC3 crosses over EMA144 3. T3 falling 4. HLC3 crosses under EMA144 → PB Short triangle If steps 1→4 don’t complete in time (within Max bars for full sequence), the sequence is abandoned (no signal). Lines & Colors (quick interpretation) EMA144 (orange): your baseline trend filter. T3 (green/red): Green when T3 < HLC3 (price above the smoothed path; often supportive in up-moves) Red when T3 > HLC3 (price below the smoothed path; often pressure in down-moves) HLC3 (gray): the typical price the logic uses ( (H+L+C)/3 ). Label Behavior (anchoring & cleanup) Each signal creates one label at the signal bar with ⏳. The label is position-locked: it stays at the same bar index and y-price it was born at. After the evaluation check, the label text and color update to ✔/✖, but position stays fixed. The indicator keeps only the last N labels (your “Show only the last N labels” input). Older ones are deleted to reduce clutter. What You Can (and Can’t) Infer from ✔ / ✖ ✔ OK: Structure behaved as intended during the evaluation window (HLC3 finished on the correct side of EMA144). Inference: The pullback continued in the expected direction post-signal. ✖ Fail: Structure ended up opposite the expectation. Inference: The pullback did not continue cleanly (chop, reversal, or insufficient follow-through). > Important: ✔/✖ is not profit or loss. It’s an objective rule check. Use it to identify market regimes where your entries perform best. Input Settings — How they change the visuals T3 length: Shorter → faster turns, more signals (and more noise). Longer → smoother turns, fewer but cleaner sequences. T3 volume factor (0–1, default 0.7): Higher → more curvature/smoothing. Typical sweet spot: 0.5–0.9. EMA length (baseline) default 144: Smaller → faster baseline, more cross events, more aggressive signals. Larger → slower, stricter trend confirmation. Max bars for full sequence (signal window): Smaller → only fresh, snappy pullbacks can signal. Larger → allows slower pullbacks to complete. Evaluation window (after signal): Smaller → verdict arrives quickly (less tolerance). Larger → gives the trade more time to prove itself structurally. Show only the last N labels: Controls chart clutter. Increase for more history, decrease for focus. (FYI: The “Debug” toggle exists but doesn’t draw extra overlays in this version.) Practical Reading Flow (how to use visuals in seconds) 1. Triangles catch your eye: ▲ for Long, ▼ for Short. That’s the setup completion. 2. ⏳ label starts—don’t judge yet; let the evaluation run. 3. Watch EMA slope and T3 color for context (trend + pressure). 4. After the window: ✔/✖ stamps the outcome. Log what the market was like when you got ✔. Common “Why did…?” Questions Q: Why did I get no triangle even though T3 turned and EMA crossed? A: The 4 steps must happen in order and within the Signal Window. If timing breaks, the sequence resets. Q: Why did my label stay ⏳ for so long? A: That’s by design until the Evaluation Window completes. The verdict only happens at the end of that window. Q: Why is ✔/✖ different from my PnL? A: It’s a structure check, not a profit check. It doesn’t know your entries/exits/stops. Q: Do the small lime/red crosses mean buy/sell? A: No. They’re context markers for HLC3↔EMA crosses, useful inside the sequence but not standalone signals. Pro Tips (turn visuals into decisions) Entry: Use the ▲/▼ triangle as your trigger, in trend direction (check EMA slope/market structure). Stop: Behind the pullback swing around the signal bar. Exit: Structure levels, R-multiples, or a reverse HLC3↔EMA cross as a trailing logic. Tuning: Intraday/volatile: shorter T3/EMA + tighter Signal Window. Swing/slow: default 144 EMA + moderate windows. Learn quickly: Filter your chart to show only ✔ or only ✖ windows in your notes; see which sessions, assets, and volatility regimes suit the system. Disclaimer No indicator guarantees profits. Sweep2Trade Pro \ is a decision aid; always combine with solid risk management and your own judgment. Backtest, forward test, and size responsibly. The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Enhance your trading precision and confidence 🚀 Happy trading Chervolino
Pine Script®指標
由chervolino提供
MACD StrategyOverview The "MACD Strategy" is a straightforward trading strategy tested for BTCUSDT Futures on the 1-minute timeframe, leveraging the Moving Average Convergence Divergence (MACD) indicator to identify momentum-based buy and sell opportunities. Developed with input from expert trading analyst insights, this strategy combines technical precision with risk management, making it suitable for traders of all levels on platforms like TradingView. It focuses on capturing trend reversals and momentum shifts, with clear visual cues and automated alerts for seamless integration with trading bots (e.g., Bitget webhooks). #### How It Works This strategy uses the MACD indicator to generate trading signals based on momentum and trend direction: - **Buy Signal**: Triggered when the MACD line crosses above the signal line, and the MACD histogram turns positive (above zero). This suggests increasing bullish momentum. - **Sell Signal**: Triggered when the MACD line crosses below the signal line, and the MACD histogram turns negative (below zero), indicating growing bearish momentum. Once a signal is detected, the strategy opens a position (long for buy, short for sell) with a position size calculated based on your risk tolerance. It includes a stop-loss to limit losses and a take-profit to lock in gains, both dynamically adjusted using the Average True Range (ATR) for adaptability to market volatility. #### Key Features - **MACD-Based Signals**: Relies solely on MACD for entry points, plotted in a separate pane for clear momentum analysis. - **Risk Management**: Automatically calculates position size based on a percentage of your account balance and sets stop-loss and take-profit levels using ATR multipliers and a risk:reward ratio. - **Visual Feedback**: Plots entry, stop-loss, and take-profit lines on the chart with labeled markers for easy tracking. - **Alerts**: Includes Bitget webhook-compatible alerts for automated trading, notifying you of buy and sell signals in real-time. #### Input Parameters - **Account Balance**: Default 10000 – Set your initial trading capital to determine position sizing. - **MACD Fast Length**: Default 12 – The short-term EMA period for MACD sensitivity. - **MACD Slow Length**: Default 26 – The long-term EMA period for MACD calculation. - **MACD Signal Length**: Default 9 – The smoothing period for the signal line. - **Risk Per Trade (%)**: Default 3.0 – The percentage of your account balance risked per trade (e.g., 3% of 10000 = 300). - **Risk:Reward Ratio**: Default 3.0 – The ratio of potential profit to risk (e.g., 3:1 means risking 1 to gain 3). - **SL Multiplier**: Default 1.0 – Multiplies ATR to set the stop-loss distance (e.g., 1.0 x ATR). - **TP Multiplier**: Default 3.0 – Multiplies ATR to set the take-profit distance, adjusted by the risk:reward ratio. - **Line Length (bars)**: Default 25 – Duration in bars for displaying trade lines on the chart. - **Label Position**: Default 'left' – Position of text labels (left or right) relative to trade lines. - **ATR Period**: Default 14 – The number of periods for calculating ATR to measure volatility. #### How to Use 1. **Add to Chart**: Load the "MACD Strategy" as a strategy and the "MACD Indicator" as a separate indicator on your TradingView chart (recommended for BTCUSDT Futures on the 1-minute timeframe). 2. **Customize Settings**: Adjust the input parameters based on your risk tolerance and market conditions. For BTCUSDT Futures, consider reducing `Risk Per Trade (%)` during high volatility (e.g., 1%) or increasing `SL Multiplier` for wider stops. 3. **Visual Analysis**: Watch the main chart for trade entry lines (green for buy, red for sell), stop-loss (red), and take-profit (green) lines with labels. Use the MACD pane below to confirm momentum shifts. 4. **Set Alerts**: Create alerts in TradingView for "Buy Signal" and "Sell Signal" to automate trades via Bitget webhooks. 5. **Backtest and Optimize**: Test the strategy on historical BTCUSDT Futures 1-minute data to fine-tune parameters. The short timeframe requires quick execution, so monitor closely for slippage or latency. #### Tips for Success - **Market Conditions**: This strategy performs best in trending markets on the 1-minute timeframe. Avoid choppy conditions where MACD crossovers may produce false signals. - **Risk Management**: Start with the default 3% risk per trade and adjust downward (e.g., 1%) during volatile periods like BTCUSDT news events. The 3:1 risk:reward ratio targets consistent profitability. - **Timeframe**: Optimized for 1-minute charts; switch to 5-minute or 15-minute for less noise if needed. - **Confirmation**: Cross-check MACD signals with price action or support/resistance levels for higher accuracy on BTCUSDT Futures. #### Limitations - This strategy relies solely on MACD, so it may lag in fast-moving or sideways markets. Consider adding a secondary filter (e.g., RSI) if needed. - Stop-loss and take-profit are ATR-based and may need adjustment for BTCUSDT Futures’ high volatility, especially during leverage trading. #### Conclusion The "MACD Strategy" offers a simple yet effective way to trade momentum shifts using the MACD indicator, tested for BTCUSDT Futures on the 1-minute timeframe, with robust risk management and visual tools. Whether you’re scalping crypto futures or exploring short-term trends, this strategy provides a solid foundation for automated or manual trading. Share your feedback or customizations in the comments, and happy trading!
Pine Script®策略
由thetraderlodge提供
Adaptive Square Levels - for all InstrumentsDescription: The Adaptive Square Levels indicator generates mathematically derived horizontal trendlines based on perfect squares (1², 2², 3², …) anchored to the first trading day’s open of each month. ✨ Key Features 📐 Adaptive Anchoring: Locks onto the nearest square number to the monthly open. 🔁 Dual Context: Displays both current month and previous month levels for comparison. ➕➖ Expansion: Automatically plots ±10 square levels around the anchor. 🟧 Highlighting: Multiples of 3² (9, 36, 81, …) are marked in orange for quick recognition. ⭐ Focus Line: The nearest square is bold and labeled with a ★. 🏷️ Readable Labels: Large fonts ensure values are clearly visible, even on high-value instruments. 📊 Finite Trendlines: Levels extend only within the month, not as infinite rays. ⚙️ Configurable: Adjustable max price coverage up to 250,000 (default) to suit stocks, indices, futures, or commodities. ⚙️ How It Works At the start of a new month, the script locks the opening price of the first bar. It finds the nearest perfect square to that open. It then plots 10 square levels above and below the anchor. Current month levels extend to today’s bar; previous month levels stop at month end. The nearest square line is emphasized with a bold ★ label. 🎯 How to Use Support & Resistance: Use square levels as natural price magnets or turning points. Monthly Structure: Compare previous vs. current month grids for context. Confluence Tool: Combine with price action, Fibonacci retracements, or market profile. Focus Points: Pay special attention to the ★ bold nearest-square — it often becomes the key pivot for the month. 📚 Study Note: Why Square Numbers? Square numbers (1, 4, 9, 16, 25, …) create a nonlinear but structured grid. Unlike linear step levels (e.g., round numbers), square levels: Expand naturally as prices rise. Provide distinct mathematical anchors. Have been observed to align with natural support/resistance zones. This indicator makes square mathematics practical by adapting them to live market opens. ⚠️ Disclaimer This script is for educational purposes only. It is not financial advice. Trading carries risk; always test and combine with proper risk management.
Pine Script®指標
由civiljeeva提供
1
Stop ATR Indicator [AlphaGroup.Live]Tralling Stop tool! Perferct for Prop Firm Traders The Stop ATR is a volatility-based trailing stop that adapts dynamically to market conditions. It uses the Average True Range (ATR) to plot a continuous “stair-step” line: • In uptrend , the stop appears below price as a green line, rising with volatility. • In downtrend , the stop appears above price as a red line, falling with volatility. Unlike fixed stops, the Stop ATR never moves backward . It only trails in the direction of the trend, locking in profits while leaving room for price to move. Key features: • ATR-based trailing stop that adapts to volatility. • Clean “one line only” design — no overlap of signals. • Adjustable ATR period and multiplier for flexibility. • Color-coded visualization for quick trend recognition. How traders use it: • Manage trades with volatility-adjusted stop placement. • Identify trend reversals when price closes across the stop. • Combine with other entry signals for a complete strategy. About us: AlphaGroup.Live develops battle-tested trading systems and tools for real traders — indicators, bots, dashboards, and strategy manuals. Visit alphagroup.live to get our free eBook: The Ultimate 100 Trading Strategies .
Pine Script®指標
由AlphaGroupLive提供
Pivot Extension Indicator (Jaxon0007)Pivot Extension Indicator (Jaxon0007) This indicator automatically detects pivot highs and lows, then extends those levels forward as potential support and resistance zones. It's designed for traders who rely on price action, breakout setups, and clear structure in the market. . 🔧 Key Features: ✅ Auto-detected pivot levels (highs & lows) ✅ Forward-projected SR lines with customizable length ✅ Real-time buy/sell signal alerts on pivot breakouts ✅ Optional RSI and MACD filters to confirm trade quality ✅ Clean chart visuals with full styling control (lines, width, style) 🧠 Best For: Traders who follow breakouts, trends, or swing strategies Those looking for a non-repainting indicator Anyone who wants a clean way to visualize structure and key price zones 📌 Notes: This is an indicator-only tool — it doesn't execute trades or track performance. Built in Pine Script v5 and fully copyright-free. 💼 Created by @Jaxon0007 For VIP signals, private tools, or account management — DM me on Telegram.
Pine Script®指標
由Jaxon007提供
Mikula's Master 360° Square of 12Mikula’s Master 360° Square of 12 An educational W. D. Gann study indicator for price and time. Anchor a compact Square of 12 table to a start point you choose. Begin from a bar’s High or Low (or set a manual start price). From that anchor you can progress or regress the table to study how price steps through cycles in either direction. What you’re looking at : Zodiac rail (far left): the twelve signs. Degree rail: 24 rows in 15° steps from 15° up to 360°/0°. Transit rail and Natal rail: track one planet per rail. Each planet is placed at its current row (℞ shown when retrograde). As longitude advances, the planet climbs bottom → top, then wraps to the bottom at the next sign; during retrograde it steps downward. Hover a planet’s cell to see a tooltip with its exact longitude and sign (e.g., 152.4° ♌︎). The linked price cell in the grid moves with the planet’s row so you can follow a planet’s path through the zodiac as a path through price. Price grid (right): the 12×24 Square of 12. Each column is a cycle; cells are stepped price levels from your start price using your increment. Bottom rail: shows the current square number and labels the twelve columns in that square. How the square is read The square always begins at the bottom left. Read each column bottom → top. At the top, return to the bottom of the next column and read up again. One square contains twelve cycles. Because the anchor can be a High or a Low, you can progress the table upward from the anchor or regress it downward while keeping the same bottom-to-top reading order. Iterate Square (shifting) Iterate Square shifts the entire 12×24 grid to the next set of twelve cycles. Square 1 shows cycles 1–12; Square 2 shows 13–24; Square 3 shows 25–36, etc. Visibility rules Pivot cells are table-bound. If you shift the square beyond those prices, their highlights won’t appear in the table. A/B levels and Transit/Natal planetary lines are chart overlays and can remain visible on the table as you shift the square. Quick use Choose an anchor (date/time + High/Low) or enable a manual start price . Set the increment. If you anchored with a Low and want the table to step downward from there, use a negative value. Optional: pick Transit and Natal planets (one per rail), toggle their plots, and hover their cells for longitude/sign. Optional: turn on A/B levels to display repeating bands from the start price. Optional: enable swing pivots to tint matching cells after the anchor. Use Iterate Square to shift to later squares of twelve cycles. Examples These are exploratory examples to spark ideas: Overview layout (zodiac & degree rails, Transit/Natal rails, price grid) A-levels plotted, pivots tinted on the table, real-time price highlighted Drawing angles from the anchor using price & time read from the table Using a TradingView Gann box along the A-levels to study reactions Attribution & originality This script is an original implementation (no external code copied). Conceptual credit to Patrick Mikula, whose discussion of the Master 360° Square of 12 inspired this study’s presentation. Further reading (neutral pointers) Patrick Mikula, Gann’s Scientific Methods Unveiled, Vol. 2, “W. D. Gann’s Use of the Circle Chart.” W. D. Gann’s Original Commodity Course (as provided by WDGAN.com). No affiliation implied. License CC BY-NC-SA 4.0 (non-commercial; please attribute @Javonnii and link the original). Dependency AstroLib by @BarefootJoey Disclaimer Educational use only; not financial advice.
Pine Script®指標
由Javonnii提供
6
Economic Profit (Fixed & Labeled) — Rated + PeersFRAC (Fundamental-Rated-Asset-Calculate) FRAC is a fundamentals-driven tool designed to measure whether a company is creating or destroying shareholder value. Unlike surface ratios, FRAC uses Economic Profit (ROIC – WACC) as its engine, showing whether a business truly outperforms its cost of capital. 🔹 What FRAC Does Calculates ROIC (Return on Invested Capital) vs. WACC (Weighted Average Cost of Capital). Shows whether a company is creating or destroying shareholder value. Uses tiered color coding for clarity: 🔵 Superior (Aqua Blue) → Top tier; best of the best. 🟣 Elite (Purple) → Strong value creation. 🟢 Positive (Green) → Solid, creating shareholder value. 🟡 Marginal (Yellow) → Barely covering cost of capital. 🔴 Negative (Red) → Value destruction. 🔹 Composite Ranking System (1–4) FRAC also assigns each company a Composite Rank so you can compare multiple names side by side. The rank works like this: Rank 1 → Superior (🔵 Aqua Blue) Best possible rating; wide gap between ROIC and WACC. Rank 2 → Elite (🟣 Purple) Strongly positive; above-average capital efficiency. Rank 3 → Positive (🟢 Green) Creating value but only moderately; not a top compounder. Rank 4 → Marginal/Negative (🟡/🔴) Weak or destructive; either barely covering WACC or losing money on capital. ✅ How to Use the Ranks When comparing a set of peers (e.g., NVDA, AMD, INTC): FRAC will display each company’s color rating + composite rank (1–4). You can instantly see who is strongest vs. weakest in the group. Best decisions = overweight Rank 1 & 2 companies, avoid Rank 4 names. 🔹 Key Inputs Explained Risk-Free Asset → Typically the 10-Year US Treasury yield (US10Y). Corporate Tax Rate → Effective tax rate for the company’s country (e.g., USCTR). Expected Market Return → Historical average ~8–10%, adjustable. Beta Lookback Period → Controls how far back Beta is calculated (longer = more stable, shorter = more reactive). 👉 These must be set correctly for FRAC to calculate WACC accurately. 🔹 Example Comparison NVDA: ROIC 25% – WACC 7% = +18% → 🔵 Superior → Rank 1 AMD: ROIC 17% – WACC 8% = +9% → 🟣 Elite → Rank 2 INTC: ROIC 11% – WACC 9% = +2% → 🟢 Positive → Rank 3 FSLY: ROIC 5% – WACC 10% = –5% → 🔴 Negative → Rank 4 🔹 Why It Matters Buffett said: “The best businesses are those that can consistently generate returns on capital above their cost of capital.” FRAC turns that into a visual + numeric rating system (1–4), making comparisons across peers simple and actionable. 🔹 Credit FRAC was created by Hunter Hammond (Elite x FineFir), inspired by corporate finance models of Economic Profit and Economic Value Added (EVA). ⚠️ Disclaimer: FRAC is a research framework, not financial advice. Always pair with full due diligence.
Pine Script®指標
由ElitexFineFir提供
Previous High/Low Range (D,W,M,Q)Previous High/Low Range (D, W, M, Q) This indicator displays the previous period’s high, low, and midpoint levels across multiple timeframes: Daily, Weekly, Monthly, and Quarterly. It extends these key price levels into the future, allowing traders to quickly identify important support and resistance zones based on historical price action. Features: Shows previous Daily, Weekly, Monthly, and Quarterly highs, lows, and midpoints. Optionally extends these levels forward for easy visualization. Configurable colors and visibility for each timeframe. Includes optional midpoint lines at 50% between high and low to identify equilibrium points. Supports logarithmic scale calculations for midpoints to maintain accuracy on log charts. Optional labels that display exact price values for each level. Designed to help traders recognize key levels for entries, exits, and risk management. Use this indicator to gain a multi-timeframe perspective on significant price ranges and anticipate potential reversal or breakout zones.
Pine Script®指標
由celynuik提供