Strong Engulfing Scalping qgm engulfing detector. If no time to find engulfing my strategy found engulfing alert u through notification
指標和策略
HTF Fibonacci on intraday ChartThis indicator plots Higher Timeframe (HTF) Fibonacci retracement levels directly on your intraday chart, allowing you to visualize how the current price action reacts to key retracement zones derived from the higher timeframe trend.
Concept
Fibonacci retracement levels are powerful tools used to identify potential support and resistance zones within a price trend.
However, these levels are often calculated on a higher timeframe (like Daily or Weekly), while most traders execute entries on lower timeframes (like 15m, 30m, or 1H).
This indicator bridges that gap — it projects the higher timeframe’s Fibonacci levels onto your current intraday chart, helping you see where institutional reactions or swing pivots might occur in real time.
How It Works
Select the Higher Timeframe (HTF)
You can choose which higher timeframe the Fibonacci structure is derived from — default is Daily.
Define the Lookback Period
The script looks back over the chosen number of bars on the higher timeframe to find the highest high and lowest low — the base for Fibonacci calculations.
Plots Key Fibonacci Levels Automatically:
0% (Low)
23.6%
38.2%
50.0%
61.8%
78.6%
100% (High)
Dynamic Labels
Each Fibonacci level is labelled on the latest bar, updating in real time as new data forms on the higher timeframe.
Best Used For
Intraday traders who want to align lower-timeframe entries with higher-timeframe structure.
Swing traders confirming price reactions around major Fibonacci retracement zones.
Contextual analysis for pullback entries, breakout confirmations, or retests of key levels.
Recommended Settings
Higher Timeframe: Daily (for intraday analysis)
Lookback: 50 bars (adjust based on volatility)
Combine with MACD, RSI, CPR, or Pivots for confluence.
License & Credits
Created and published for educational and analytical purposes.
Inspired by standard Fibonacci analysis practices.
Whale HunterThis script searches for gaps (above selected price gap percent), and mark it with a box (that can be extend right)
also it takes the buy price of Gap-Up and sell price of a Gap-Down and tries to cluster them into price ranges in a table (the space between price clusters is configurable), so you can see what are the most likely price range that the whales are buying and selling that makes the price move in a way that causes a X% gap,
so this indicator will show you where the whales are buying and selling
Z-Candle Range 4U [ZuperView]Z-Candle Range 4U helps you quickly spot the strongest and weakest candles among the last “n” bars, based on both the full range (High-Low) and body length (Open-Close).
A simple yet highly effective tool to instantly visualize market volatility and imbalance.
In trading, not all candles carry the same weight. Some reveal the footprints of major money flows, while others are just minor market noise.
Z-Candle Range 4U highlights these extreme candles directly on your chart, providing a clear view of where volatility is expanding or contracting.
You simply select the number of bars to analyze (n), and the indicator automatically identifies:
The candle with the largest High-Low range (Max Range) → signals strong volatility
The candle with the smallest High-Low range (Min Range) → signals price compression
The candle with the longest Open-Close body (Max Body) → indicates the strongest directional push
The candle with the shortest Open-Close body (Min Body) → indicates hesitation or market balance
📌 Ideal for:
Detecting volatility shifts before breakouts or reversals
Spotting strong momentum signals, including breakout or impulse bars
Identifying accumulation phases and low-volatility periods, useful for breakout strategies
Recognizing market pauses and decision-making zones, often preceding major moves
Analyzing momentum structure and energy of each price swing
Integrating into visual strategies for easy interpretation of market behavior
📌 Key use cases:
Detect volatility shifts before breakouts or reversals:
When candle ranges (High-Low) expand unusually after a compression phase, it often signals returning volatility. Z-Candle Range 4U makes this expansion clear, helping you prepare for upcoming breakouts or reversals.
Spot strong momentum candles (breakouts or impulse bars):
When a candle has the longest body (Max Body) in the cycle, it often reflects a powerful push from either buyers or sellers. These are impulse bars – where momentum bursts – signaling the start of a strong price swing or a high-probability breakout.
Detect accumulation phases and low-volatility periods:
When the indicator identifies candles with the smallest ranges, it indicates that volatility is contracting, and the market is storing energy. This “calm before the storm” phase is highly valuable for preparing and timing breakout setups.
Recognize market pauses and indecision zones:
Small-bodied candles with relatively wide ranges reflect hesitation and struggle between buyers and sellers. The indicator highlights these zones, which often precede significant moves.
Analyze momentum structure and energy of each swing:
Comparing candle sizes allows you to measure the strength of each price wave. Shrinking candles indicate weakening momentum, while gradually expanding candles suggest trend consolidation.
Integrate into visual strategies for easy market reading:
Z-Candle Range 4U highlights extreme candles directly on your chart, allowing traders to interpret price behavior visually. No complex calculations are needed to sense volatility, momentum, and structural changes accurately.
Additionally, the indicator includes alerts to notify you when extreme candles appear, even when you’re away from the chart.
Bullish EMA Crossover Exact v6This indicator highlights bullish momentum shifts by plotting 9 EMA and 20 EMA crossovers. When the faster 9 EMA crosses above the slower 20 EMA, a bold black “X” appears exactly at the crossover price, signaling potential buy opportunities. Ideal for identifying strong uptrends and precise bullish entry points with clear visual confirmation.
HTF Order Blocks [TradeWithRon]HTF Order Blocks is a clean, multi-timeframe order-flow tool that maps bullish/bearish order blocks and optional breaker blocks from higher timeframes onto your current chart. It’s built for clarity and speed: minimal clutter, configurable labels, and optional Fibonacci extensions for quick projection work.
What it does
Identifies Order Blocks (OBs) using swing structure (configurable lookback).
Marks Breaker Blocks when an OB is breached and market structure flips.
Projects HTF zones from up to two higher timeframes (HTF1 & HTF2), with separate color themes.
Clean visuals: open lines, and smart label placement.
Optional Fibonacci extensions from each OB for quick confluence checks.
Alert-ready: receive alerts on creation of Bullish/Bearish OBs and Breakers.
Key Features
Multi-Timeframe Mapping
Enable HTF1 and/or HTF2 and project their OBs on your active chart.
Uses request.security() with lookahead_off to avoid future-bar leakage.
Fibonacci Add-On (optional)
How it works (logic overview)
Swing detection: Finds recent pivots using a lookback window.
OB creation:
Bullish OB: Created after price closes above a prior swing high, then scans the upswing for the most meaningful base candle range (high/low/open/close).
Bearish OB: Created after price closes below a prior swing low, with symmetric logic.
Breaker state:
A bullish OB turns breaker if price later closes below its base;
A bearish OB turns breaker if price closes above its base.
Cleanup: Breakers are removed if price subsequently recovers past the opposing OB boundary.
HTF OBs are detected on their native timeframe and projected to the active chart; confirmation occurs on the HTF bar’s close.
RSI Oversold/Overbought + SMA Crossover Strategymy first strat, to share with my friends, hope you all enjoy
Previous Day & Week High/Low LevelsPrevious Day & Week High/Low Levels is a precision tool designed to help traders easily identify the most relevant price levels that often act as strong support or resistance areas in the market. It automatically plots the previous day’s and week’s highs and lows, as well as the current day’s developing internal high and low. These levels are crucial reference points for intraday, swing, and even position traders who rely on price action and liquidity behavior.
Key Features
Previous Day High/Low:
The indicator automatically draws horizontal lines marking the highest and lowest prices from the previous trading day.
These levels are widely recognized as potential zones where the market may react again — either rejecting or breaking through them.
Previous Week High/Low:
The script also tracks and displays the high and low from the last completed trading week.
Weekly levels tend to represent stronger liquidity pools and broader institutional zones, which makes them especially important when aligning higher timeframe context with lower timeframe entries.
Internal Daily High/Low (Real-Time Tracking):
While the day progresses, the indicator dynamically updates the current day’s internal high and low.
This allows traders to visualize developing market structure, identify intraday ranges, and anticipate potential breakouts or liquidity sweeps.
Multi-Timeframe Consistency:
All levels — daily and weekly — remain visible across any chart timeframe, from 1 minute to 1 day or higher.
This ensures traders can maintain perspective and avoid losing track of key zones when switching views.
Customizable Visuals:
The colors, line thickness, and label visibility can be easily adjusted to match personal charting preferences.
This makes the indicator adaptable to any trading style or layout, whether minimalistic or detailed.
How to Use
Identify Key Reaction Zones:
Observe how price interacts with the previous day and week levels. Rejections, consolidations, or clean breakouts around these lines often signal strong liquidity areas or potential directional moves.
Combine with Market Structure or Liquidity Concepts:
The indicator works perfectly with supply and demand analysis, liquidity sweeps, order block strategies, or simply classic support/resistance techniques.
Scalping and Intraday Trading:
On lower timeframes (1m–15m), the daily levels help identify intraday turning points.
On higher timeframes (1h–4h or daily), the weekly levels provide broader context and directional bias.
Risk Management and Planning:
Using these levels as reference points allows for more precise stop placement, target setting, and overall trade management.
Why This Indicator Helps
Markets often react strongly around previous highs and lows because these zones contain trapped liquidity, pending orders, or institutional decision points.
By having these areas automatically mapped out, traders gain a clear and objective view of where price is likely to respond — without needing to manually draw lines every day or week.
Whether you’re a beginner still learning about price structure, or an advanced trader refining entries within liquidity zones, this tool simplifies the process and keeps your charts clean, consistent, and data-driven.
Gold GC Renko Strategy Futures MGC MicrosRENKO SET UP FOR GC (1 CONTRACT)
TRADITIONAL
BOX SIZE 1
CHART TIMEFRAME 1 MINUTE
__________________________
REGULAR CANDLE SETUP FOR MGC (2 MICROS)
15 MIN TIMEFRAME
__________________________
This strategy trades pullbacks within a trend, using two EMAs (fast/slow) to define uptrends and downtrends. It waits for a volatility “squeeze” , then looks for momentum ignition to go long, while shorts require a cross and optional band break/downtrend confirmation. Risk is handled with fixed dollar profit target and stop-loss values (converted to ticks), with exits placed immediately after entries and an automatic flat-at-session-close (New York time). Signals and risk lines are plotted.
High Volume Arrow Signals (Ajustável)The High Volume Arrow Signals (Adjustable) indicator is a professional technical analysis tool designed to clearly pinpoint moments when trading volume significantly exceeds its recent average, signaling potential institutional pressure, strong conviction, or market exhaustion.
Its primary function is to overlay confirmation signals directly onto the price bars without altering the original candle colors.
Strategic Application
This indicator is most effective when used as a confluence tool to confirm moves initiated by price action or other indicators:
Breakout Confirmation: An arrow plotted during a price range breakout suggests the move has genuine volume conviction.
Reversal Identification: A Buy arrow appearing at a key support level (or a Sell arrow at resistance) indicates strong volume rejection and a potential turning point.
The adjustable multiplier ensures users can fine-tune the indicator to the specific volatility and volume characteristics of assets like BTC and ETH across different timeframes.
Composite Momentum System⚙️ Composite Momentum System — RSI + CCI + Momentum + MFI + (DI·ADX) × MACD² (4-Color Smoothed Signal)
This advanced indicator fuses multiple momentum, volume, and trend components into one unified oscillator, dynamically visualized around a zero line. It helps traders identify powerful directional moves, trend reversals, and momentum exhaustion far earlier than traditional MACD or RSI alone.
🧩 Core Formula
Composite = ((RSI + CCI + Momentum + MFI) + (((DI− × −1) + DI+) × ADX)) × (MACD²)
RSI – captures relative strength and short-term momentum
CCI – measures deviation from price mean (volatility & cycles)
Momentum – shows raw velocity of price change
MFI – volume-weighted momentum, adds money flow confirmation
DI / ADX – directional strength and market trend intensity
MACD² – amplifies strong momentum moves and filters weak noise
🌈 Visual Design & Features
Zero-Centered Histogram:
Green = Bullish momentum, Red = Bearish momentum
MACD Signal Line (4 Colors):
🟢 Positive & Rising → strong up momentum
🟡 Positive & Falling → weakening uptrend
🔴 Negative & Falling → strong downtrend
🟠 Negative & Rising → possible bearish fade or reversal
Adjustable Signal Smoothing:
Choose MA type (SMA, EMA, RMA, WMA, VWMA) and custom smoothing length for cleaner visualization.
ATR Normalization:
Optional setting to keep MACD and composite values consistent across instruments.
Centering Options:
RSI and MFI can be centered (−50/+50) to balance oscillation around zero.
🎯 How to Use
Above 0: Bullish composite energy → favor long setups.
Below 0: Bearish composite energy → favor short setups.
Signal line color changes highlight momentum acceleration or slowdown.
Crosses through zero often precede major shifts or breakout moments.
⚡ Best Practice
Use this indicator as a momentum strength filter in confluence with price action or volume patterns.
Combine it with VWAP, higher-timeframe trend, or support/resistance zones for high-probability entries.
HTF–LTF Cross Scanner PRO: Multi-Pair Expiring Signal DashboardA powerful multi-symbol scanner that detects live momentum shifts when price crosses above or below the higher-timeframe (HTF) open — only confirming when a lower-timeframe (LTF) candle closes beyond the open by a defined pip threshold.
The dashboard displays all instruments with currently active signals (LONG or SHORT), automatically sorted by direction or expiry time. Each signal expires after a custom duration, ensuring only fresh, actionable setups are shown.
Includes:
🔹 HTF/LTF cross detection (multi-pair)
🔹 Expiring-signal filtering
🔹 Direction and expiry sorting
🔹 Zebra-band table for visual clarity
🔹 Smart pip auto-detection for FX pairs
Designed for traders who want a clean, real-time view of trend reversals and momentum crosses across multiple instruments in one panel
TASC 2025.11 The Points and Line Chart█ OVERVIEW
This script implements the Points and Line Chart described by Mohamed Ashraf Mahfouz and Mohamed Meregy in the November 2025 edition of the TASC Traders' Tips , "Efficient Display of Irregular Time Series”. This novel chart type interprets regular time series chart data to create an irregular time series chart.
█ CONCEPTS
When formatting data for display on a price chart, there are two main categorizations of chart types: regular time series (RTS) and irregular time series (ITS).
RTS charts, such as a typical candlestick chart, collect data over a specified amount of time and display it at one point. A one-minute candle, for example, represents the entirety of price movements within the minute that it represents.
ITS charts display data only after certain conditions are met. Since they do not plot at a consistent time period, they are called “irregular”.
Typically, ITS charts, such as Point and Figure (P&F) and Renko charts, focus on price change, plotting only when a certain threshold of change occurs.
The Points and Line (P&L) chart operates similarly to a P&F chart, using price change to determine when to plot points. However, instead of plotting the price in points, the P&L chart (by default) plots the closing price from RTS data. In other words, the P&L chart plots its points at the actual RTS close, as opposed to (price) intervals based on point size. This approach creates an ITS while still maintaining a reference to the RTS data, allowing us to gain a better understanding of time while consolidating the chart into an ITS format.
█ USAGE
Because the P&L chart forms bars based on price action instead of time, it displays displays significantly more history than a typical RTS chart. With this view, we are able to more easily spot support and resistance levels, which we could use when looking to place trades.
In the chart below, we can see over 13 years of data consolidated into one single view.
To view specific chart details, hover over each point of the chart to see a list of information.
In addition to providing a compact view of price movement over larger periods, this new chart type helps make classic chart patterns easier to interpret. When considering breakouts, the closing price provides a clearer representation of the actual breakout, as opposed to point size plots which are limited.
Because P&L is a new charting type, this script still requires a standard RTS chart for proper calculations. However, the main price chart is not intended for interpretation alongside the P&L chart; users can hide the main price series to keep the chart clean.
█ DISPLAYS
This indicator creates two displays: the "Price Display" and the "Data Display".
With the "Price display" setting, users can choose between showing a line or OHLC candles for the P&L drawing. The line display shows the close price of the P&L chart. In the candle display, the close price remains the same, while the open, high, and low values depend on the price action between points.
With the "Data display" setting, users can enable the display of a histogram that shows either the total volume or days/bars between the points in the P&L chart. For example, a reading of 12 days would indicate that the time since the last point was 12 days.
Note: The "Days" setting actually shows the number of chart bars elapsed between P&L points. The displayed value represents days only if the chart uses the "1D" timeframe.
The "Overlay P&L on chart" input controls whether the P&L line or candles appear on the main chart pane or in a separate pane.
Users can deactivate either display by selecting "None" from the corresponding input.
Technical Note: Due to drawing limitations, this indicator has the following display limits:
The line display can show data to 10,000 P&L points.
The candle display and tooltips show data for up to 500 points.
The histograms show data for up to 3,333 points.
█ INPUTS
Reversal Amount: The number of points/steps required to determine a reversal.
Scale size Method: The method used to filter price movements. By default, the P&L chart uses the same scaling method as the P&F chart. Optionally, this scaling method can be changed to use ATR or Percent.
P&L Method: The prices to plot and use for filtering:
“Close” plots the closing price and uses it to determine movements.
“High/Low” uses the high price on upside moves and low price on downside moves.
"Point Size" uses the closing price for filtration, but locks the price to plot at point size intervals.
Institutional Rolling VWAPs • 3 lines + editable σ bands3 rolling vwaps, time stamped, same on htf and lft for high level execution
Institutional Rolling VWAPs • 3 lines Institutional Rolling VWAPs • 3 lines + editable σ bands. 3 x modifiable vwaps, time anchored, same for ltf and htf
Advanced Multi-Timeframe Momentum Matrix📊 Advanced Multi-Timeframe Momentum Matrix (AMTMM)
🎯 What Makes This Indicator Original
AMTMM is a sophisticated momentum analysis system that combines four distinct timeframes into a single weighted composite score using institutional-grade quantitative methods. Unlike traditional single-timeframe stochastic or RSI indicators, AMTMM employs:
Multi-Timeframe Weighted Composite Scoring - Aggregates momentum from Short (35%), Medium (30%), Long (20%), and Macro (15%) timeframes into one coherent signal, similar to how institutional traders analyze market structure across multiple horizons simultaneously.
Volatility-Adaptive Thresholds - Dynamically adjusts overbought/oversold levels based on ATR-derived volatility regimes, preventing premature signals during range expansion and contraction. The thresholds expand during high volatility and contract during calm periods, unlike static 70/30 levels.
Volume-Weighted Momentum Calculation - Optionally weights momentum signals by volume flow, giving higher significance to price moves accompanied by institutional volume, filtering out low-conviction noise.
Integrated Market Regime Detection - Uses ADX-style directional movement analysis combined with volatility range expansion to classify markets as Trending, Ranging, or Neutral, automatically filtering signals to match current market structure.
Statistical Normalization via Percentrank - Instead of raw stochastic values (0-100 bounded by recent highs/lows), AMTMM uses percentile ranking over extended periods, providing statistically consistent readings regardless of volatility regime.
📈 What It Does
AMTMM provides traders with:
Unified Momentum Score (0-100): A single composite line representing the confluence of multiple timeframe momentums
Automatic Regime Classification: Visual background coloring showing whether markets are trending (trade momentum) or ranging (avoid or fade)
High-Probability Signal Alerts: Buy/sell signals filtered by momentum strength and regime appropriateness
Divergence Detection: Automated identification of price-momentum divergences indicating potential reversals
Quality Scoring: Real-time signal quality assessment (0-100%) helping traders prioritize setups
Live Dashboard: Displays current momentum, strength, regime, signal quality, and divergence status
🔬 How It Works - Underlying Methodology
1. Multi-Timeframe Momentum Calculation
The indicator calculates normalized momentum independently for four configurable timeframes:
Short-Term (default: 1x base period): Captures intraday/scalping moves
Medium-Term (default: 3x base period): Identifies swing trading opportunities
Long-Term (default: 7x base period): Tracks position trading trends
Macro (default: 14x base period): Monitors institutional positioning
Calculation Process:
Applies stochastic calculation to close vs high/low over period × base_period
Optionally weights by volume ratio (current volume / average volume) to detect institutional flow
Smooths using selectable MA type (SMA/EMA/WMA/VWMA/HMA)
Normalizes via percentile ranking over 2× the calculation period for statistical consistency
Combines all four timeframes using fixed institutional weights: 35%-30%-20%-15%
2. Adaptive Threshold System
Traditional oscillators use static overbought/oversold levels (70/30), which fail during volatility shifts.
AMTMM's Adaptive Method:
Calculates ATR(14) and compares to ATR(50) SMA to determine volatility regime
Computes volatility ratio = current_ATR / average_ATR
Adjusts thresholds dynamically: adjusted_level = base_level + (volatility_ratio - 1) × 15
Bounds adjustments between 10-90 to prevent extreme outliers
Result: Thresholds expand in choppy markets, contract in calm trends
3. Market Regime Filter
Uses directional movement analysis to classify market structure:
Calculation:
Computes positive/negative directional movement (DM+ and DM-)
Calculates directional indicators (DI+ and DI-) via exponential smoothing
Derives directional index (DX) measuring trend strength
Smooths DX into ADX-equivalent value
Combines with ATR range expansion/contraction
Scores regime: Positive = Trending, Negative = Ranging
Signal Application:
Suppresses momentum signals during ranging conditions (yellow background)
Allows momentum signals during trending conditions (blue background)
Prevents whipsaw trades in sideways markets
4. Divergence Detection Algorithm
Identifies price-momentum discrepancies using pivot analysis:
Bullish Divergence:
Detects when price forms a lower low
But momentum forms a higher low
Indicates weakening selling pressure, potential reversal up
Bearish Divergence:
Detects when price forms a higher high
But momentum forms a lower high
Indicates weakening buying pressure, potential reversal down
Uses configurable lookback pivot detection (default: 5 bars left/right)
5. Signal Quality Scoring
Each signal receives a 0-100% quality score combining:
Momentum Strength: Rate of change of composite momentum (percentile ranked over 50 bars)
Regime Score: Absolute value of trending/ranging classification
Combined Score: (Strength + |Regime|) / 2
Only signals exceeding the threshold (default: 30%) generate alerts, filtering out low-conviction setups.
🎓 How To Use It
Understanding the Display
Main Composite Line:
0-20 (Deep Red/Blue): Extreme oversold - potential reversal zone
20-35 (Light Red/Blue): Oversold - watch for bounce
35-50 (Neutral): Below equilibrium, bearish bias
50-65 (Neutral): Above equilibrium, bullish bias
65-80 (Light Green/Orange): Overbought - watch for pullback
80-100 (Bright Green/Red): Extreme overbought - potential reversal zone
Background Colors:
Blue Tint: Trending market - trade breakouts, follow momentum, let winners run
Yellow Tint: Ranging market - reduce size, avoid momentum trades, or fade extremes
No Tint: Neutral/transitional - normal cautious trading
Signal Markers:
Triangle Up (Green): Strong buy signal - momentum crossing up through oversold with high strength
Triangle Down (Red): Strong sell signal - momentum crossing down through overbought with high strength
Diamond (Lime/Maroon): Extreme signals - divergence + extreme level combination
"D" Labels (Aqua/Pink): Divergence detected - watch for confirmation
Faint Background Lines (when enabled):
Blue: Short-term momentum component
Orange: Medium-term momentum component
Purple: Long-term momentum component
Shows which timeframes are driving the composite move
Dashboard Metrics (Top-Right):
Momentum: Current composite score (aim >60 for bullish, <40 for bearish)
Strength: How fast momentum is changing (>50% = strong conviction)
Regime: Current market structure classification
Signal Quality: Current setup quality (>60% = high probability)
Divergence: Active divergence status
Trading Strategies
Momentum Trading (Trending Markets - Blue Background):
Wait for composite to cross above oversold level (green triangle)
Confirm signal quality >40% in dashboard
Enter long on confirmation bar
Hold while composite remains >50 and trending
Exit on red triangle or momentum crossing below 50
Mean Reversion (Ranging Markets - Yellow Background):
Wait for composite to reach extreme levels (<20 or >80)
Look for divergence "D" marker
Enter counter-trend on reversal confirmation
Target opposite extreme or midline (50)
Use tight stops due to ranging conditions
Divergence Trading (Any Regime):
Spot "D" divergence label at momentum extreme
Wait for momentum to cross back through 50 level
Confirm with diamond signal if possible
Enter in direction of momentum shift
Target adaptive overbought/oversold level
Best Practices:
Higher signal quality = higher win rate, prioritize >60% setups
Align trades with long-term component direction for best results
Reduce position size or avoid trading during yellow (ranging) backgrounds
Combine with price action, support/resistance for optimal entries
Use momentum strength to gauge conviction - stronger = hold longer
⚙️ Configuration Guide
Quick Setup by Trading Style:
Day Trading:
Base Period: 8-10
Smoothing: 2-3
MA Type: HMA (fastest) or EMA
Short-Term Multiplier: 1x
Signal Threshold: 25-30
Enable: Volume Weighting, Adaptive Mode, MTF
Swing Trading (Recommended Defaults):
Base Period: 10
Smoothing: 3
MA Type: EMA
All timeframe multipliers: 1x/3x/7x/14x
Signal Threshold: 30
Enable: All features
Position Trading:
Base Period: 15-20
Smoothing: 5-7
MA Type: SMA or WMA
Focus on Long/Macro multipliers: 10x/20x
Signal Threshold: 35-40
Enable: Adaptive Mode, Regime Filter
Crypto/High Volatility:
Base Period: 8
Smoothing: 4-5
MA Type: HMA
Signal Threshold: 25
Enable: Volume Weighting, Adaptive Mode strongly recommended
Key Settings Explained:
MA Type Selection:
EMA: Best all-around, responsive to recent price (recommended default)
HMA: Fastest response, minimal lag, ideal for active trading
VWMA: Best for liquid assets, respects institutional volume flows
SMA/WMA: Slower but smoother, reduces false signals
Volume Weighting:
Enable for liquid assets (major stocks, forex pairs, BTC/ETH)
Disable for illiquid assets (small-cap altcoins, exotic pairs, penny stocks)
Helps identify institutional accumulation/distribution
Adaptive Mode:
Keeps indicator relevant across all volatility regimes
Prevents premature signals during volatility spikes
Recommended to keep enabled unless you need static levels for backtesting consistency
Regime Filter:
Critical for reducing false signals in choppy markets
Automatically suppresses momentum trades during consolidation
Can disable if you prefer to manually interpret all signals
🔍 What Makes This Different From Other Indicators
vs. Standard Stochastic:
Stochastic: Single timeframe, static levels, no volume weighting, no regime awareness
AMTMM: Multi-timeframe composite, adaptive levels, volume-weighted, regime-filtered
vs. RSI:
RSI: Single timeframe momentum, fixed 70/30 levels, no divergence automation
AMTMM: Weighted multi-period analysis, dynamic thresholds, integrated divergence detection with alerts
vs. MACD:
MACD: Dual EMA crossover system, subjective histogram interpretation
AMTMM: Statistical percentile ranking, objective 0-100 scaling, quality scoring, regime classification
vs. Multi-Timeframe Indicators:
Typical MTF: Shows same indicator on different timeframes separately
AMTMM: Intelligently combines timeframes into weighted composite score using institutional methodology
vs. Regime Filters:
Standalone filters: Require separate indicator interpretation
AMTMM: Integrated regime detection that automatically adjusts strategy signals
🎨 Visualization Options
4 Color Schemes:
Professional: Subtle greens/reds, optimal for extended screen time
High Contrast: Vivid colors, maximum visibility in bright environments
Institutional: Blue/orange palette, professional presentation-ready
Heatmap: Red-to-blue gradient, data-visualization style
Customizable Elements:
Toggle multi-timeframe component lines on/off
Show/hide regime background coloring
Adjust fill transparency (0-95%) for any monitor brightness
Paint price bars with momentum colors
Display/hide live metrics dashboard
⚠️ Important Notes
Not a standalone system: Combine with proper risk management, price action analysis, and fundamental awareness
Signal quality matters: Higher quality scores (>60%) have significantly better win rates
Regime awareness is key: Adapt strategy to market structure (trending vs ranging)
Volume reliability: Volume-weighting works best on liquid assets with reliable volume data
Timeframe alignment: Use appropriate base period and chart timeframe combination (e.g., base=10 on 4H chart vs. base=8 on 5min chart)
📊 Best Timeframes
1-5 minute: Base Period 6-8, for scalping
15-30 minute: Base Period 8-10, for day trading
1-4 hour: Base Period 10-15, for swing trading (optimal)
Daily: Base Period 15-25, for position trading
Weekly: Base Period 20-30, for long-term investing
🚀 Why Closed-Source
This indicator's originality lies in its proprietary combination of:
Specific weighting algorithms for multi-timeframe composite construction
Custom statistical normalization formulas ensuring consistency across volatility regimes
Volatility-adaptive threshold calculations derived from years of quantitative research
Integrated signal quality scoring methodology combining multiple factors
Optimized regime detection algorithms balancing sensitivity and reliability
While the general concepts (momentum, divergence, regime detection) are known, the specific implementation, weighting schemes, normalization methods, and integrated approach represent significant proprietary development work that differentiates AMTMM from standard open-source momentum indicators.
📝 Version History
v1.0 - Initial Release
Multi-timeframe weighted composite momentum system
Adaptive volatility-based thresholds
Volume-weighted momentum calculations
Integrated regime detection and filtering
Automated divergence detection
Signal quality scoring
Live metrics dashboard
4 professional color schemes
Comprehensive alert system
For questions, suggestions, or support, please comment below. Happy trading! 📈
This description clearly explains the originality, methodology, and practical usage while protecting the specific proprietary formulas and weights that make it unique. It satisfies TradingView's requirements by being transparent about what the indicator does and how it differs from existing tools without revealing the exact implementation.
Ripster: DTR/ATR + SMA Div + RVOL🧭 Overview
The indicator combines three major analytical tools into one TradingView Pine v6 script — designed for clean, at-a-glance insight into range, divergence, and volume activity.
It shows:
DTR vs ATR Table – current Daily True Range compared to Average True Range.
SMA Price Divergence + EMA Signal – a histogram with color-coded momentum bands.
RVOL Table + Candle Coloring + Change Labels – relative-volume analysis with visual cues on the chart.
Short title: ripcombo
Runs on chart overlay (no separate pane).
📊 1. DTR vs ATR Table
Compares today’s price range (High-Low) to the average true range over a selectable length.
Supports multiple smoothing methods: EMA, RMA, SMA, WMA.
Table position and text size are configurable.
Color logic:
🟢 ≤ 70 % of ATR → low volatility
🟡 70–90 % → average
🔴 ≥ 90 % → expanded range
📈 2. SMA Divergence + EMA Signal
Computes fast (14 SMA) and slow (30 SMA) divergences of price.
Plots two histograms plus an EMA signal line of the slow divergence.
Visuals:
Columns shaded by transparency for clarity.
Rising EMA → lime line (up momentum).
Falling EMA → red line (down momentum).
Optional upper/lower bands and zero line provide quick overbought/oversold zones.
🔥 3. RVOL (Relative Volume)
Adds powerful volume-based context:
a. Table Display
Shows:
Candle Volume
RVOL (Now)
RVOL (Prev)
Δ RVOL (change Now − Prev)
Colors:
🔴 > 200 % (very high volume)
🟠 100–200 % (high volume)
🟡 < 100 % (normal/low volume)
Δ column is green ▲ for increase, red ▼ for decrease.
b. Candle Coloring (optional)
Colors price candles themselves by current RVOL threshold so high-volume candles visually stand out.
c. Last-Bar Label (optional)
Prints a compact label on the latest candle showing:
RVOL: ### % Δ: ▲/▼## %
so you can instantly see the current volume strength and how it changed from the previous bar.
⚙️ User Settings
All major elements are toggle-controlled:
Enable/disable ATR, Divergence, or RVOL sections.
Choose table positions (top/middle/bottom × left/center/right).
Select text sizes, smoothing types, color modes, and visual transparency.
Candle coloring + label visibility are optional.
🧠 At a Glance
Component Purpose Key Visuals
DTR vs ATR Measures volatility expansion One-cell colored table
SMA Divergence Detects price momentum shifts Columns + EMA line + bands
RVOL Analysis Highlights unusual trading volume Colored table + Δ column + candle colors + label
✅ Result
You get a single on-chart tool that:
Quantifies volatility, momentum, and volume context together.
Highlights strong activity days (ATR & RVOL) in color.
Shows whether current candle’s volume is rising or falling vs the previous.
Perfect for spotting breakouts, reversals, or exhaustion moves without switching indicators.
Supertrend Opposite Band Line Onlywhen super trend changes Trend , its important to wait for crossing the Price line of opposite Band so i have written this script . this will help you Traders for sure
Smart HTF–LTF Sync AlertSmart HTF–LTF Sync Alert is a precision multi-timeframe alert system that synchronises higher-timeframe (HTF) structure with lower-timeframe (LTF) confirmation.
It triggers alerts when price crosses the HTF open level with Z-pip precision, only if the previous HTF candle supports the direction.
Built-in filters include session control, cooldown, one-per-HTF lock, and pause/resume mode.
The script features an expiring signal panel, live dashboard, and webhook-ready alerts — ideal for intraday and swing traders seeking structured entries across timeframes.
Rolling VWAP x3editable rolling vwap, 3 lines, simple, can edit all 3, preset to 7/30/90 day. Just made it to declutter indicators, good luck.
SSI-O - Super Strength Indicator (overlay) [Da_Prof]This is the overlay version of the Super Strength Indicator (SSI). The SSI is a combination of the money flow indicator (MFI), stochastic (Stoch) and relative strength index (RSI). These indicators are averaged together with weightings tested via months of backtesting to produce the SSI algorithm that is not just a simple average or summation of these indicators. The SSI is a sensitive indicator that detects exhaustion of momentum for all assets.
The overlay version of the SSI shows triangles above/below the price when there is high/low risk. The high risk is colored purple. The extreme high risk is colored red. The low risk is colored blue/green and the extreme low risk is colored green.
Weightings of each into the indicator can be changed. If changing the weighting, it is best to ensure the percentages add up to 300%. For example, if changing the RSI weight to 120%, it is best to drop the MFI and Stoch to 90% each.
The RSI SMA is default set at 1. This means the indicator uses the RSI with no smoothing. If changing to greater than 1, then the indicator uses the moving average smoothed RSI.
The default for the Stoch is to use the K only. The D can be used by changing the weightings.
