支撑带User Guide
Trend Filter:
When price stays above both lines ⇒ primary trend is bullish;
when price stays below both lines ⇒ primary trend is bearish.
Buy-the-pullback to the band (strong trend):
During an uptrend, if price pulls back into the “support band” (between the two lines or slightly below) and shows a stabilization candle/volume confirmation, consider a probing long.
Sell-the-rebound to the band (weak trend):
During a downtrend, if price rebounds into the “support band” and fails to break through, with weakening candles, consider a trend-following short.
In-band consolidation:
If price oscillates between the two lines, treat it as a consolidation/rotation zone. Reduce chase trades and wait for a clean exit above/below the band.
Strength/Weakness Transition Watchpoints:
A first close breaking above/below the “support band” and holding for ≥ 3 bars increases reliability.
When the two lines expand in the same direction (widening distance), trends tend to be cleaner; when they converge, a reversal or choppier action may be near.
使用说明：
趋势过滤：价格整体在两线之上 ⇒ 大趋势偏强；整体在两线之下 ⇒ 大趋势偏弱。
回踩带买（强势行情）：上涨途中回落至“支撑带”区域（两线之间或略下探）出现止跌K/量能配合，可考虑试探性做多。
反抽带空（弱势行情）：下跌途中反弹触“支撑带”不破、转弱K线出现，可考虑顺势做空。
带内震荡：价格在两线间来回切换，视作整理/换手区，减少追单冲动，等待带上/下的有效离开。
强弱切换关注点：
首次收盘突破/跌破“支撑带”并能维持 ≥3根K，可信度提升。
两线“同向发散”（距离拉大）时，趋势更干脆；“收敛”时，可能接近转折或震荡加剧。
交易节奏建议
入场：等价格触带后出现确认信号（例如：形态反转、关键K线、震荡指标），而不是盲目摸带。
止损：放在“支撑带”另一侧或最近 swing 点外侧（别卡点，一点点空间给波动）。
止盈：分批落袋 + 移动止损。沿带奔跑的趋势，别一次吃干抹净，留点给行情发挥。
错峰加仓：顺势时允许在带附近“阶梯加仓”，但每次加仓都要收紧总体风险。
多周期联动（强烈推荐）：
上位周期（W/M）判定方向；
交易周期（H4/D）执行；
只有当交易周期与上位周期的“支撑带”方向一致时，信号才加分。反向就降级看待。
适配品种与周期：
黄金/XAU、期金/期权标的均可用；
趋势型周期H4以上级别体验最佳；超短周期噪音多，带内来回“抽耳光”的几率上升。
与其它工具的“配套打法：
价量/结构：在带附近结合关键高低点、缺口、成交密集区做确认。
风控仪表：配合ATR等指标决定止损距离与仓位。
节奏日：非农、CPI 等高波动日，宁肯等确认，也别在带上“硬扛”。以上翻译成英文。
趨勢分析
master2.0 ✅ How It Works
The Master 2.0 indicator is a custom-developed trend and signal tool based on a modified range filter algorithm, specifically designed for clarity, non-repainting signals, and actionable trade execution.
🔧 1. Custom Adaptive Range Filter (Original Logic)
At its core is a custom-built filter that adapts to price volatility. Unlike standard MAs or public-domain range indicators, this version:
(1) Uses a double-smooth EMA logic on absolute price changes.
(2)Multiplies the range by an Impact Factor, giving a dynamic width.
(3) Applies a custom filter algorithm that limits noise and locks on trend movement.
This logic was modified from the concept of range-based filters, but entirely re-engineered to serve trend-following and TP triggering.
🟩 2. Visual Trend Zones (Upper/Lower Lines)
The filtered value generates two dynamic lines:
(1)One above the filter
(2)One below the filter
These create a color-filled “trend tunnel”, making it easy to identify:
(3)🔵 Uptrend (blue fill)
(4)🔴 Downtrend (red fill)
(5)🟡 Sideways market (no fill or neutral color)
These visual cues allow instant identification of market direction without reading complex data
📈 3. Smart Buy/Sell Signals (Confirmed, Non-Repainting ✅)
(1)🚀 Smart Buy is triggered when a confirmed uptrend begins (filter shifts upward with a
new confirmation).
(2)🔻 Smart Sell appears at the start of a confirmed downtrend.
(3)Sideways filters out choppy signals, reducing whipsaws.
✅ All signals are confirmed only after the candle closes (barstate.isconfirmed is used), meaning:
🔒 No repainting or false previews — 100% reliable on live charting.
💰 4. Take Profit System (Unique Utility)
This indicator tracks the entry price after a signal, and auto-detects when a Take Profit level
(in pips) is reached.
(1)💰 Book Profit alert is triggered above/below the candle.
(2)Helps secure gains without relying on external bots or platforms.
🔔 5. Real-Time Alerts Included
All alerts are built-in for automation:
(1)🚀 Smart Buy
(2)🔻 Smart Sell
(3)💰 Book Profit (Buy/Sell)
Advanced Candlestick Patterns [MAB]🔎 Overview
Advanced Candlestick Patterns is a framework that detects well-defined candlestick patterns with a consistent Validation / Devalidation process, optional swing-context filters , and a hidden-candle reconstruction mode for stricter pattern anatomy.
The goal is clarity and discipline: signals are described, thresholds are visible, and risk parameters are explicit.
⚙️ Key Features
📊 Pattern Engine (Extensible) — Modular detection methods so new patterns can be added without changing workflow.
✅ Validation / Devalidation — Clear rules for confirmation and invalidation; plotted with distinct lines for transparency.
📈 Swing Filter (Optional) — Require setups to align with local swing highs/lows via selectable lookbacks.
🧩 Hidden-Candle Mode — Reconstructs OHLC (prev close + current extremes) to reveal intra-bar structure; visuals may differ from native bars.
🎯Target Systems — Choose Points, Percentage, or Risk:Reward; info label shows EP/SL/TP-1.
Performance-Safe Controls — Label size, info toggle, and non-editable internal lines.
📈 How to Use
Add the script to your chart (after access is granted).
Choose pattern types for Bullish and Bearish detection from the inputs.
⁃ Enable Hidden Candles if you want stricter intra-bar anatomy.
⁃ Enable Detect near Swings and pick a swing length (Smaller/Medium/Bigger).
💬Decide whether to show Trade Info Labels (Entry, SL, Target 1).
🎯Set your Target Mode (Points / Percentage / Risk:Reward) and parameter.
✅ Use the plotted Validation (confirmation) and Devalidation (invalidation) levels to plan.
Tip: With Detect near Swings ON, a setup counts only if the prior bar’s high/low equals the rolling extreme. If too strict, adjust the lookback or disable.
💡Recommended charting
• Intraday structure: 5m–15m–30m
• Swing confirmation: 2h-4h–1D
• Test across multiple symbols; avoid cherry-picking.
🛡 Risk Management System
This tool displays mechanics— you control the risk. A common template:
Entry : Entry is typically considered only after validation.
Stop-Loss : Initial SL at the structure-defined level (displayed).
Target 1 : Choose Points / % / Risk:Reward (e.g., 1R).
After TP-1 : Consider partial profits and trail the remainder via ATR / short MA / swing boxes (user-defined).
No target or trail is guaranteed—market conditions change.
🧭 Visual Guide
#1. Input Selections Window:
#2. Bearish Patterns: Valid and Devaild rules for the Bearish Patterns
#3. Bullish Patterns: Valid and Devalied rules for the Bullish Patterns
#4. Spotted Bullish Harami Pattern & Trade Info label explained:
#5. Spotted Bearish Engulfing Pattern:
⚠️ Important Notes
⏱️ Timeframes : Works on all timeframes. For intraday, start 5m–15m; for swing, use 4h–1D. Evaluate on bar close .
✅ Instruments : Any OHLC market (Crypto/FX/Indices/Equities). Forward-adjusted data may show minor visual differences.
🧩 Hidden-Candle Mode : Detection follows reconstructed bars; visuals may differ from native candles.
🔔 Signal Lifecycle : Deterministic New → Validated → Devalidated . Levels reset to na when devalidated.
🚫 No Look-Ahead : No repainting after bar close. Intrabar values can update until the bar closes.
📊 Performance : High label/line counts can slow charts on lower TFs; reduce label size or toggle Trade Info if needed.
🔐 Conclusion and Access
This framework promotes a disciplined, rules-first approach to pattern-based trading: clear definitions, visible Validation/Devalidation levels, and explicit risk references.
👉 For how to request access, please see the Author’s Instructions section below.
🧾 Disclaimer
This script is intended solely for educational and informational purposes. It does not provide financial or investment advice, nor should it be interpreted as a recommendation to buy, sell, or trade any securities or derivatives.
We are not SEBI-registered advisors , and the strategies shown are not personalized guidance . Past performance or backtested results are not indicative of future outcomes and should not be relied upon for live trading without thorough evaluation.
Trading in financial markets—especially options—involves significant risk. Both profits and losses are inherent to the trading process.
MuLegend's Break & Retest StrategyThis strategy was produced to help traders who trade NQ: win! try it out on a demo, see how you like and happy trading!! Works well if you are a break & retest trader!!!
MuMu
@atltime2shine on IG
B@dshah Indicator🚀 Advanced Multi-Indicator Trading System
A comprehensive trading indicator that combines multiple technical analysis tools for high-probability signal generation:
📊 CORE FEATURES:
- EMA Trend Analysis (Fast/Slow crossovers)
- RSI Momentum Detection
- MACD Signal Confirmation
- Bollinger Bands (Squeeze & Mean Reversion)
- Fibonacci Retracement Levels
- Volume & ATR Filtering
- Multi-Confluence Scoring System (0-10 scale)
🎯 SIGNAL QUALITY:
- Non-repainting signals (confirmed at bar close)
- Minimum 60% strength threshold for trades
- Dynamic TP/SL based on market structure
- Real-time win rate tracking
- Signal strength percentage display
⚙️ UNIQUE FEATURES:
- BB Squeeze detection for volatility breakouts
- Fibonacci level confluence analysis
- Smart position sizing recommendations
- Visual TP/SL lines with outcome tracking
- Comprehensive statistics table
🔔 ALERTS INCLUDED:
- Buy/Sell signals with strength ratings
- TP/SL hit notifications
- BB squeeze/expansion alerts
- Fibonacci level touches
Best used on 1H+ timeframes for optimal results.
Perfect for swing trading and position entries.
Muzyorae - RTH Anchored Quarters CyclesRTH Anchored Quarters Cycles — Model Overview
The RTH Anchored Quarters Cycles model is designed to divide the Regular Trading Hours (RTH) session of U.S. equities (typically 09:30 – 16:00 New York time) into four structured “quarters” plus a closing marker. It provides a consistent framework for analyzing intraday market behavior by aligning time-based partitions with the actual trading day.
Key Features
Anchored to RTH
The model starts each cycle at 09:30 NY time (the official cash open).
It ignores overnight or extended-hours data, focusing strictly on the RTH session, where the majority of institutional order flow takes place.
After 18:00 NY time, the model still references the same trading date, preventing false signals from session rollovers.
Quarterly Time Blocks
The trading day is split into five reference points:
Q1: 09:30 – 10:00
Q2: 10:00 – 11:30
Q3: 11:30 – 13:30
Q4: 13:30 – 16:00
End: Closing marker at 16:00
Each boundary is drawn as a vertical line on the chart, clearly separating the quarters.
Customization
Users can adjust the start/end times of each quarter.
So if you would like to wish to use ICT timing Macro, intraday, daily and even weekly
The line style, color, and width are configurable (solid/dotted/dashed).
A label is placed at each quarter boundary (Q1, Q2, Q3, Q4, End) for quick visual reference.
Days Back Control
The model can display the cycles for multiple past trading days (user-defined).
Weekend days are automatically skipped, so “2 days back” means today and the previous trading day.
Why It’s Useful
Intraday Structure: Traders can quickly identify where the market is within the daily RTH cycle.
Consistency: Since the model is anchored to RTH, it avoids confusion caused by overnight Globex activity.
Clarity: Vertical markers and labels provide a clean framework for aligning trade setups, volume analysis, or order flow studies with specific time windows.
Flexibility: The customizable settings allow adaptation across instruments and strategies.
AI KNN-Dual SuperTrend MTF - by Trading Pine Lab🇬🇧
The AI KNN-Dual SuperTrend MTF is a next-generation trading strategy that merges two higher-timeframe SuperTrends with dual KNN (K-Nearest Neighbors) classifiers, an ADX/DMI filter, and a Pivot Percentile bias module. This layered architecture ensures stronger signal confirmation by requiring consensus across AI models, multi-timeframe SuperTrends, and statistical filters.
Entries occur only when both SuperTrends align with bullish or bearish KNN labels, while the ADX/DMI filter validates momentum. Exits are managed dynamically with adaptive trailing stops (ST ± ATR × factor) or when market conditions flip according to percentile bias.
All parameters are fully configurable:
-Trading direction filter: Long / Short / Both.
-KNN classifiers: neighbors (K), dataset size (N), smoothing lengths.
-Dual SuperTrend: higher timeframes, ATR length, ATR factor, baseline type.
-ADX/DMI filter: customizable length and timeframe.
-Pivot Percentile module: multi-scale statistical bias.
-Visualization: AI markers, ribbons, aura lines, and per-trend coloring.
RVM LLS Signal DetectorThe indicator detects long lower wick candle and gives indicator to buy points. Proper risk reward needs to be managed to make the indicator work
Candle Opening Price & FVG/iFVGIndicator Description: Candle Opening Price & Fair Value Gaps w/(iFVGs)
This powerful, multi-purpose indicator combines two essential trading concepts into one comprehensive tool, designed to provide traders with key price levels and areas of market imbalance.
What It Does
1. Customizable Candle Open Lines: This feature allows you to mark the opening price of specific candles from key trading sessions throughout the day.
Up to 7 Custom Time Inputs: You can define up to seven different times (e.g., "08:30" for London Open, "09:30" for New York Open).
Automatic Horizontal Lines: The script automatically draws a persistent horizontal line at the opening price of the candle corresponding to your set time.
Full Customization: Each line can be independently enabled or disabled and styled with a unique color, width, and line style (solid, dashed, dotted), allowing for a clean and personalized chart setup.
Use Cases: Ideal for marking session opens, news event candles, or any other time-based level that you consider significant for support, resistance, or directional bias.
2. Dynamic Fair Value Gaps (FVG) & Inversions (iFVG): This part of the indicator automatically identifies, draws, and manages Fair Value Gaps, a core concept in modern price action trading.
Automatic FVG Detection: The script identifies both Bullish FVGs (areas of buying inefficiency) and Bearish FVGs (areas of selling inefficiency) based on the classic three-bar pattern.
Clear Visualization: Discovered FVGs are drawn as colored boxes on the chart, extending into the future until they are mitigated. Colors for Bullish and Bearish FVGs are fully customizable.
Inversion Logic: When price wicks into an FVG, the box changes color to signify an "inversion." A Bullish FVG that gets tapped becomes potential resistance (Bearish Inversion), and a Bearish FVG becomes potential support (Bullish Inversion). This dynamic shift helps you track how the market is interacting with these zones.
Zone Mitigation: Once an inverted FVG is fully reclaimed by a candle close, the zone is considered "mitigated" and the box is automatically removed from the chart, keeping your view focused on relevant, active zones.
Disclaimer
This indicator is for educational and informational purposes only and should not be construed as financial advice. Trading in financial markets involves substantial risk, and there is always the potential for loss. Past performance is not indicative of future results.
The signals, levels, and zones generated by this tool are based on historical price data and mathematical formulas; they do not predict the future with certainty. You should always conduct your own research, practice sound risk management, and consult with a qualified financial advisor before making any trading decisions. The author and TradingView are not responsible for any financial losses you may incur by using this script. Use at your own risk.
Flex-ATR SuperTrend - by Trading Pine Lab🇬🇧
The Flex-ATR SuperTrend is a versatile trading strategy that enhances the classic SuperTrend with adjustable ATR methods, a custom date-range filter, and modern visual styling. By allowing a switch between standard ATR and SMA-based TR, the baseline adapts better to different volatility regimes and market conditions.
Entries are triggered when the SuperTrend flips bullish, while exits occur when it flips bearish. A highlight cloud emphasizes the active trend, and optional BUY/SELL labels provide clear visual confirmation of entry and exit signals.
All parameters are fully configurable:
-ATR settings: period and multiplier, with toggle between classic ATR and SMA-based TR.
-Date range filter: define exact backtesting windows.
-Signal visualization: optional BUY/SELL labels.
-Highlight cloud: cyan/magenta overlay for trend emphasis.
-Customization: enable/disable signals and visuals for a clean or detailed interface.
Dual-BB SuperTrend - by Trading Pine Lab🇬🇧
The Dual-BB SuperTrend is a fusion strategy that builds a BBTrend oscillator from two Bollinger Bands (short & long lookbacks) and then runs a SuperTrend over that oscillator to time entries and exits. The BBTrend captures expansion/contraction between the two bands (structural momentum), while the SuperTrend converts that flow into clear directional flips.
Entries occur on SuperTrend direction flips over the BBTrend series (Long when ST turns bullish, Short when it turns bearish). Optional percentage TP/SL can be applied on top. The chart includes a blue/orange theme for the BBTrend histogram with a subtle glow around the zero line, and BUY/SELL label markers with arrows for clean visual confirmation.
All parameters are fully configurable:
-Trading direction filter: Long / Short / Both.
-Bollinger settings: short length, long length, standard-deviation multiplier.
-SuperTrend over BBTrend: length and ATR factor, contrarian labels toggle, bull/bear colors.
-Risk controls: Take-Profit % and Stop-Loss % with TP/SL/Both/None mode.
-Visualization: BBTrend column colors (blue/orange, strong/weak), zero-line glow, BUY/SELL label styling.
[GrandAlgo] Moving Averages Cross LevelsMoving Averages Cross Levels
Many traders watch for moving average crossovers – such as the golden cross (50 MA crossing above 200 MA) or death cross – as signals of changing trends. However, once a crossover happens, the exact price level where it occurred often fades from view, even though that level can be an important reference point. Moving Averages Cross Levels is an indicator that keeps those crossover price levels visible on your chart, helping you track where momentum shifts occurred and how price behaves relative to those key levels.
This tool plots horizontal line segments at the price where each pair of selected moving averages crossed within a recent window of bars. Each level is labeled with the moving average lengths (for example, “21×50” for a 21/50 MA cross) and is color-coded – green for bullish crossovers (short-term MA crossing above long-term MA) and red for bearish crossunders (short-term crossing below). By visualizing these crossover levels, you can quickly identify past trend change points and use them as potential support/resistance or decision levels in your trading. Importantly, this indicator is non-repainting – once a crossover level is plotted, it remains fixed at the historical price where the cross occurred, allowing you to continually monitor that level going forward. (As with any moving average-based analysis, crossover signals are lagging, so use these levels in conjunction with other tools for confirmation.)
Key Features:
✅ Multiple Moving Averages: Track up to 7 different MAs (e.g. 5, 8, 21, 50, 64, 83, 200 by default) simultaneously. You can enable/disable each MA and set its length, allowing flexible combinations of short-term and long-term averages.
✅ Selectable MA Type: Each average can be calculated as a Simple (SMA), Exponential (EMA), Volume-Weighted (VWMA), or Smoothed (RMA) moving average, giving you flexibility to match your preferred method.
✅ Auto Crossover Detection: The script automatically detects all crosses between any enabled MA pairs, so you don’t have to specify pairs manually. Whether it’s a fast cross (5×8) or a long-term cross (50×200), every crossover within the lookback period will be identified and marked.
✅ Horizontal Level Markers: For each detected crossover, a horizontal line segment is drawn at the exact price where the crossover occurred. This makes it easy to glance at your chart and see precisely where two moving averages intersected in the recent past.
✅ Labeled and Color-Coded: Each crossover line is labeled with the two MA lengths that crossed (e.g. “50×200”) for clear identification. Colors indicate crossover direction – by default green for bullish (positive) crossovers and red for bearish (negative) crossovers – so you can tell at a glance which way the trend shifted. (You can customize these colors in the settings.)
✅ Adjustable Lookback: A “Crosses with X candles” input lets you control how far back the script looks for crossovers to plot. This prevents your chart from getting cluttered with too many old levels – for example, set X = 100 to show crossovers from roughly the last 100 bars. Older crossover lines beyond this lookback window will automatically clear off the chart.
✅ Optional MA Plots: You can toggle the display of each moving average line on the chart. This means you can either view just the crossover levels alone for a clean look, or also overlay the MA curves themselves for additional context (to see how price and MAs were moving around the crossover).
✅ No Repainting or Hindsight Bias: Once a crossover level is plotted, it stays at that fixed price. The indicator doesn’t move levels around after the fact – each line is a true historical event marker. This allows you to backtest visually: see how price acted after the crossover by observing if it retested or respected that level later.
How It Works:
1️⃣ Add to Chart & Configure – Simply add the indicator to your chart. In the settings, choose which moving averages you want to include and set their lengths. For example, you might enable 21, 50, 200 to focus on medium and long-term crosses (including the golden cross), or turn on shorter MAs like 5 and 8 for quick momentum shifts. Adjust the lookback (number of bars to scan for crosses) if needed.
2️⃣ Visualization – The script continuously checks the latest X bars for any points where one MA crossed above or below another. Whenever a crossover is found, it calculates the exact price level at which the two moving averages intersected. On the last bar of your chart, it will draw a horizontal line segment extending from the crossover bar to the current bar at that price level, and place a label to the right of the line with the MA lengths. Green lines/labels signify bullish crossovers (where the first MA crossed above the second), and red lines indicate bearish crossunders.
3️⃣ On Your Chart – You will see these labeled levels aligned with the price scale. For example, if a 50 MA crossed above a 200 MA (bullish) 50 bars ago at price $100, there will be a green “50×200” line at $100 extending to the present, showing you exactly where that golden cross happened. You might notice price pulling back near that level and bouncing, or if price falls back through it, it could signal a failed crossover. The indicator updates in real-time: if a new crossover happens on the latest bar, a new line and label will instantly appear, and if any old cross moves out of the lookback range, its line is removed to keep the chart focused.
4️⃣ Customization – You can fine-tune the appearance: toggle any MA’s visibility, change line colors or label styles, and modify the lookback length to suit different timeframes. For instance, on a 1-hour chart you might use a lookback of 500 bars to see a few weeks of cross history, whereas on a daily chart 100 bars (about 4–5 months) may be sufficient. Adjust these settings based on how many crossover levels you find useful to display.
Ideal for Traders Who:
Use MA Crossovers in Strategy: If your strategy involves moving average crossovers (for trend confirmation or entry/exit signals), this indicator provides an extra layer of insight by keeping the price of those crossover events in sight. For example, trend-followers can watch if price stays above a bullish crossover level as a sign of trend strength, or falls below it as a sign of weakness.
Identify Support/Resistance from MA Events: Crossover levels often coincide with pivot points in market sentiment. A crossover can act like a regime change – the level where it happened may turn into support or resistance. This tool helps you mark those potential S/R levels automatically. Rather than manually noting where a golden cross occurred, you’ll have it highlighted, which can be useful for setting stop-losses (e.g. below the crossover price in a bullish scenario) or profit targets.
Track Multiple Averages at Once: Instead of focusing on just one pair of moving averages, you might be interested in the interaction of several (short, medium, and long-term trends). This indicator caters to that by plotting all relevant crossovers among your chosen MAs. It’s great for multi-timeframe thinkers as well – e.g. you could apply it on a higher timeframe chart to mark major cross levels, then drill down to lower timeframes knowing those key prices.
Value Clean Visualization: There are no flashing signals or arrows – just simple lines and labels that enhance your chart’s storytelling. It’s ideal if you prefer to make trading decisions based on understanding price interaction with technical levels rather than following automatic trade calls. Moving Averages Cross Levels gives you information to act on, without imposing any bias or strategy – you interpret the crossover levels in the context of your own trading system.
Gaussian Trend Rider - by Trading Pine Lab🇬🇧
The Gaussian Trend Rider is a clean and effective trend-following strategy based on a simulated Gaussian filter (double SMA smoothing).
Long entries are triggered when the price closes above the Gaussian trend line, and positions are exited when the price closes back below it.
The strategy is designed to keep trading simple while still offering visual clarity:
A dynamic trend line that adapts with price.
An optional ATR-based "waterfall cloud", adding subtle context about volatility and confidence.
Entry and exit markers for clear visual confirmation.
This minimalistic approach is ideal for traders who prefer riding established trends without overcomplicating the setup.
Configurable parameters:
-Trend Length (Gaussian smoothing window).
-Styling options (line width, static/dynamic coloring, markers, ATR cloud).
Futures Confluence Delta (FCD) - Histogram
The Futures Confluence Delta (FCD) Histogram is a powerful trend-following indicator tailored for scalping futures on 1-minute charts. Displayed in a bottom panel like RSI or volume, it visualizes cumulative volume delta to identify bullish or bearish market momentum. The histogram turns green for positive delta (buying pressure, suggesting a long trend) and red for negative delta (selling pressure, indicating a short trend), providing quick insight into market direction.
This indicator is ideal for futures traders seeking confluence with other tools, such as VWMA or order block strategies. It uses a simple yet effective delta calculation (buy volume for up candles, sell volume for down candles, smoothed with EMA) to highlight trend strength, making it perfect for fast-paced scalping environments.
Key Features:
Cumulative Delta Histogram: Tracks buying vs. selling pressure, smoothed with an EMA for clarity.
Color-Coded Trend Signals: Green for bullish (long) trends, red for bearish (short) trends.
Customizable Settings: Adjust the delta lookback period and enable/disable daily reset for flexibility.
Optimized for 1-minute charts on futures.
Alert Support: Set alerts for trend changes to stay ahead of market shifts.
How to Use:
Add the indicator to your 1-minute chart. Observe the histogram in the bottom panel:
Green bars (positive delta) suggest a bullish trend, favoring long entries.
Red bars (negative delta) indicate a bearish trend, favoring short entries.
Combine with other indicators (e.g., VWMA, order blocks, or FVGs) for confluence.
Set alerts for trend changes via the FCD Long Trend or FCD Short Trend conditions.
Adjust settings (delta lookback, daily reset) to match your trading style.
Settings:
Delta Lookback Period (default: 14): Controls the EMA smoothing of the delta. Lower values increase sensitivity; higher values smooth trends.
Reset Delta Daily (default: true): Resets cumulative delta at the start of each trading day for futures session alignment.
Long Color (default: green): Color for bullish delta.
Short Color (default: red): Color for bearish delta.
Notes:
Ensure sufficient historical data (500+ bars) for accurate delta calculations.
Test on NQ for higher volatility, as it may show stronger delta signals compared to GC or ES.
Check the Pine Logs pane (“More” > “Pine Logs”) for any NA data issues if the histogram doesn’t display.
Share your feedback or suggestions in the comments!
Price-Volume RelationshipVolume is the relationship between price and performance. Set the candlestick quantity in the settings. It analyzes price and volume based on the number of candlesticks you specify to determine price expectations.
B A N K $ - HTF Candle Boxes (Power of 3)This indicator allows you to visualise the HTF candles on the LTF's, this is useful for using the Power of 3 / Accumulation, Manipulation & Distribution concepts.
By default, the HTF interval is set to 1h, this means that an outline will be created around the LTF candles that are within that 1h window. (i.e from 13:00-14:00 etc).
Features
HTF Interval Selector - this allows the user to customise which HTF interval to use
Candle Boxes - this outlines the full outer perimeter of the relevant candles
Include Body - this highlights the distance between the candle Open & Close
Show MidLine
Additional Settings
Hide Side Lines - this will only draw the Top & Bottom lines
Extend Lines to Current Candle - most recent Top & Bottom lines will extend to current price
Draw Lines from Exact Candle - this makes the most recent candle lines cleaner
I personally use this indicator to outline the most recent 3 1h candles to make it easier to identify sweeps & reversals however there is additional functionality to allow the user to customise the indicator to their preference.
Algo + Trendlines :: Medium PeriodThis indicator helps me to avoid overlooking Trendlines / Algolines. So far it doesn't search explicitly for Algolines (I don't consider volume at all), but it's definitely now already not horribly bad.
These are meant to be used on logarithmic charts btw! The lines would be displayed wrong on linear charts.
The biggest challenge is that there are some technical restrictions in TradingView, f. e. a script stops executing if a for-loop would take longer than 0.5 sec.
So in order to circumvent this and still be able to consider as many candles from the past as possible, I've created multiple versions for different purposes that I use like this:
Algo + Trendlines :: Medium Period : This script looks for "temporary highs / lows" (meaning the bar before and after has lower highs / lows) on the daily chart, connects them and shows the 5 ones that are the closest to the current price (=most relevant). This one is good to find trendlines more thoroughly, but only up to 4 years ago.
Algo + Trendlines :: Long Period : This version looks instead at the weekly charts for "temporary highs / lows" and finds out which days caused these highs / lows and connects them, Taking data from the weekly chart means fewer data points to check whether a trendline is broken, which allows to detect trendlines from up to 12 years ago! Therefore it misses some trendlines. Personally I prefer this one with "Only Confirmed" set to true to really show only the most relevant lines. This means at least 3 candle highs / lows touched the line. These are more likely stronger resistance / support lines compared to those that have been touched only twice.
Very important: sometimes you might see dotted lines that suddenly stop after a few months (after 100 bars to be precise). This indicates you need to zoom further out for TradingView to be able to load the full line. Unfortunately TradingView doesn't render lines if the starting point was too long ago, so this is my workaround. This is also the script's biggest advantage: showing you lines that you might have missed otherwise since the starting bars were outside of the screen, and required you to scroll f. e back to 2015..
One more thing to know:
Weak colored line = only 2 "collision" points with candle highs/lows (= not confirmed)
Usual colored line = 3+ "collision" points (= confirmed)
Make sure to move this indicator above the ticker in the Object Tree, so that it is drawn on top of the ticker's candles!
More infos: www.reddit.com
Algo + Trendlines :: Long PeriodThis indicator helps me to avoid overlooking Trendlines / Algolines. So far it doesn't search explicitly for Algolines (I don't consider volume at all), but it's definitely now already not horribly bad.
These are meant to be used on logarithmic charts btw! The lines would be displayed wrong on linear charts.
The biggest challenge is that there are some technical restrictions in TradingView, f. e. a script stops executing if a for-loop would take longer than 0.5 sec.
So in order to circumvent this and still be able to consider as many candles from the past as possible, I've created multiple versions for different purposes that I use like this:
Algo + Trendlines :: Medium Period : This script looks for "temporary highs / lows" (meaning the bar before and after has lower highs / lows) on the daily chart, connects them and shows the 5 ones that are the closest to the current price (=most relevant). This one is good to find trendlines more thoroughly, but only up to 4 years ago.
Algo + Trendlines :: Long Period : This version looks instead at the weekly charts for "temporary highs / lows" and finds out which days caused these highs / lows and connects them, Taking data from the weekly chart means fewer data points to check whether a trendline is broken, which allows to detect trendlines from up to 12 years ago! Therefore it misses some trendlines. Personally I prefer this one with "Only Confirmed" set to true to really show only the most relevant lines. This means at least 3 candle highs / lows touched the line. These are more likely stronger resistance / support lines compared to those that have been touched only twice.
Very important: sometimes you might see dotted lines that suddenly stop after a few months (after 100 bars to be precise). This indicates you need to zoom further out for TradingView to be able to load the full line. Unfortunately TradingView doesn't render lines if the starting point was too long ago, so this is my workaround. This is also the script's biggest advantage: showing you lines that you might have missed otherwise since the starting bars were outside of the screen, and required you to scroll f. e back to 2015..
One more thing to know:
Weak colored line = only 2 "collision" points with candle highs/lows (= not confirmed)
Usual colored line = 3+ "collision" points (= confirmed)
Make sure to move this indicator above the ticker in the Object Tree, so that it is drawn on top of the ticker's candles!
More infos: www.reddit.com
PT FinderThis is mostly helpful to find potential price targets for Daytrades on the daily chart (if stronger resistances / supports are too far away).
Shows highs / lows of nearby "pivot" candles (higher high / lower low than both candles around) - depending on expected trade direction. Based on my experience these can be potential (albeit weak) resistance / support.
If it shows values only in the wrong trade direction: set a checkmark at "Invert bullish / bearish price targets" in the indicator settings
Also shows the ADR (blue line = yesterday's close MINUS Average Day Range) - which is helpful for Daytrades to see what price movement you could potentially expect for the day!
As a nice bonus it also shows gaps as yellow areas - in case you maybe missed them because you zoomed in / out too much on your daily chart.
More infos: www.reddit.com
Quick Overview - 1DInspired by Option Stalker Pro, it shows RS/RW on 1W.
Meant to be used on the 1D chart.
Also shows ATH / ATL - depending on what is closer. Which is great to be aware that you should zoom out more to make sure you don't miss out algolines or support / resistance lines!
Also if the stock is currently at ATH / ATL, this means it might be a low-risk stock pick.
More infos: www.reddit.com
Muzyorae - Quarterly CyclesQuarterly Theory — NY Session Macro Model
The Quarterly Theory is a time-based framework for analyzing intraday market behavior during the New York session. It divides the session into four sequential quarters (Q1–Q4), each reflecting institutional activity, liquidity accumulation, and directional bias.
Q1 – Accumulation (9:30–10:00 AM): Early positioning, initial liquidity sweeps, and potential early breakouts (AMDX - XAMD patterns).
Q2 – Manipulation/Expansion (10:00–11:30 AM): Main directional move with structure breaks, fair value gaps, and liquidity sweeps.
Q3 – Distribution/Retracement (11:30 AM–1:30 PM): Consolidation, profit-taking, and market chop.
Q4 – Final Expansion/Repricing (1:30–4:00 PM): Trend continuation, reversals, and session high/low formation.
Key Features:
Fractal-based cycles scalable across intraday or multi-day timeframes.
Supports AMDX (Accumulation → Manipulation → Distribution → Expansion) and XAMD reversal sequences.
Highlights early Q1 expansions, Q2 open reference, and critical liquidity zones.
Fully synchronized to NY time and compatible with ICT concepts (SMT, FVGs, OBs, BOS).
Professional visualization with optional labels and vertical markers.
Purpose:
Provides traders a systematic framework to align with institutional flow, anticipate liquidity accumulation, identify optimal entry/exit zones, and structure trades around high-probability intraday cycles.
Quick Overview - 5mInspired by Option Stalker Pro, it shows RS/RW on 15m and 30m.
Meant to be used on the 5m chart.
Ideally you want to have RS/RW on as many time scales as possible!
More infos: www.reddit.com
Real Relative Sector Strength - NormalizedShows RS/RW, which is esp. helpful if it's not fully clear based on the stock's chart movement compared to SPY's movement.
"Glowing green" = safely strong
"Glowing red" = safely weak
More infos: www.reddit.com
