AlphaFlow - Trend DetectorOVERVIEW
AlphaFlow identifies and tracks large volume moves by combining volume analysis, price impact measurement, and conviction scoring to separate significant institutional moves from normal trading activity. Rather than just flagging high volume, this indicator evaluates whether large trades actually moved the market and assigns conviction levels based on multiple confirmation factors.
WHAT MAKES THIS ORIGINAL
This is not simply a volume indicator or volume-weighted price tracker. The originality lies in the multi-factor conviction scoring system that evaluates whether large volume moves represent genuine institutional conviction or just noise.
Key Differentiators:
- Combines volume ratio AND price impact (volume alone doesn't mean conviction)
- Conviction scoring system that weighs trend alignment, follow-through, and volume persistence
- Cumulative flow tracking that shows persistent directional pressure over time
- Market regime detection (bullish/bearish/sideways) based on flow dynamics
- Tiered signal system (EXTREME/HIGH/MEDIUM conviction) rather than binary signals
This approach solves the problem of volume spikes that don't lead to meaningful price action, or price moves on low volume that don't persist.
HOW IT WORKS
1. Whale Detection Engine:
Volume Qualification: Compares current volume to a rolling average (default 50 bars). Whale activity requires volume to be at least 1.5x the average (adjustable).
Price Impact Requirement: Volume alone isn't enough. The bar must also show significant price movement (default 0.1% minimum). This filters out high-volume consolidation where no one is actually committed to direction.
Direction Identification: Bullish whale = close > open on high volume. Bearish whale = close < open on high volume.
2. Conviction Scoring System:
The indicator doesn't just flag whale activity - it evaluates conviction through multiple factors:
Base Conviction: Calculated from (volume_ratio × price_impact) / 10
This gives higher scores to moves with both exceptional volume AND large price swings.
Trend Alignment Bonus (1.5x multiplier): Whale moves aligned with the 20-period EMA trend receive higher conviction scores. Institutional money tends to accumulate with the trend, not against it.
Follow-Through Bonus (1.3x multiplier): After whale activity, does price continue in that direction over the next bars (default 3)? Genuine conviction shows persistence.
Volume Persistence (1.2x multiplier): Is elevated volume sustained over multiple bars, or is it a one-time spike? The 3-bar average volume ratio above 1.5x indicates sustained interest.
Conviction Levels:
- EXTREME: Score > 15 (large whale emoji labels, highest confidence)
- HIGH: Score > 8 (triangle signals, strong confidence)
- MEDIUM: Score > 3 (small triangles, moderate confidence)
- LOW: Score < 3 (not plotted to reduce noise)
3. Cumulative Flow Analysis:
Rather than treating each whale move in isolation, the indicator tracks cumulative flow using an EMA of whale activity. This reveals persistent directional pressure.
Flow Calculation: Each whale bar contributes (whale_strength × direction) to the flow. Strength is volume_ratio × price_impact_percent.
Flow Momentum: Rate of change in the cumulative flow (5-bar change)
Flow Acceleration: Second derivative (3-bar change of momentum)
These metrics reveal whether whale activity is accelerating, decelerating, or reversing.
4. Market Regime Detection:
Bullish Regime: Cumulative flow > 2 AND momentum positive
Bearish Regime: Cumulative flow < -2 AND momentum negative
Sideways Regime: Neither condition met
The background color reflects the current regime, helping traders understand the broader context.
5. Flow Strength Meter:
The main plot normalizes cumulative flow to a -100 to +100 scale based on the 100-bar range. This provides a consistent visual reference regardless of the asset or timeframe.
Extreme levels at ±50 indicate particularly strong directional flow where reversals or consolidation become more likely.
HOW TO USE IT
Settings Configuration:
Whale Detection Section:
- Volume Average Period (default 50): Shorter periods make detection more sensitive to recent volume changes. Longer periods require more exceptional volume to trigger.
- Whale Volume Multiplier (default 1.5): How much above average volume must be to qualify. Lower = more signals. Higher = only extreme moves.
- Minimum Price Impact (default 0.1%): Filters out high-volume bars that didn't actually move price. Adjust based on asset volatility.
Trend Analysis:
- Trend Strength Period (default 20): EMA period for trend alignment bonus
- Confirmation Bars (default 3): How many bars to check for follow-through
Visual Settings:
- Flow Strength Meter: Main plot showing normalized cumulative flow
- Conviction Labels: Detailed labels showing volume ratio and price impact on extreme/high conviction whales
- Trend Background: Color-coded regime indication
Signal Interpretation:
EXTREME Conviction (Whale Emoji Labels):
These are the highest confidence signals. Large volume with significant price impact, aligned with trend, showing follow-through. These often mark the beginning or continuation of strong moves.
HIGH Conviction (Large Triangles):
Strong signals meeting most criteria. Good for main entries or adding to positions.
MEDIUM Conviction (Small Triangles):
Whale activity present but with fewer confirmation factors. Use for partial positions or require additional confirmation.
Flow Strength Meter:
- Above zero and rising: Bullish flow building
- Below zero and falling: Bearish flow building
- Approaching ±50: Extreme readings, watch for exhaustion
- Crossing zero: Flow regime change
Dashboard Information:
The top-right table shows:
- Current regime (bullish/bearish/sideways)
- Flow strength value
- Last whale direction
- Conviction level of last whale
- Current volume ratio
- Flow momentum direction
- Indicator status
Trading Strategies:
Trend Following: Take EXTREME and HIGH conviction signals aligned with the flow meter direction. Enter when flow is positive and rising for bullish whales, negative and falling for bearish whales.
Regime-Based: Only trade in bullish/bearish regimes (colored backgrounds). Avoid trading in sideways regimes where whale moves tend to reverse quickly.
Flow Reversals: When flow meter crosses zero with EXTREME conviction whale in the new direction, this often marks regime changes.
Exhaustion Plays: When flow reaches ±50 extreme levels, watch for EXTREME conviction whales in the opposite direction as potential reversal signals.
TECHNICAL DETAILS
Volume Ratio = Current Volume / SMA(Volume, Period)
Price Impact % = ABS(Close - Open) / Open × 100
Whale Detected = (Volume Ratio >= Multiplier) AND (Price Impact >= Minimum)
Whale Direction = Close > Open ? 1 : -1
Base Conviction = (Volume Ratio × Price Impact %) / 10
Trend Alignment = Whale Direction == Trend Direction ? 1.5 : 1.0
Follow-Through = Price continues whale direction over N bars ? 1.3 : 1.0
Volume Persistence = SMA(Volume Ratio, 3) > 1.5 ? 1.2 : 1.0
Final Conviction = Base × Trend Alignment × Follow-Through × Volume Persistence
Whale Flow = Whale Detected ? (Volume Ratio × Price Impact × Direction) : 0
Cumulative Flow = EMA(Whale Flow, 20)
Flow Momentum = Change(Cumulative Flow, 5)
Flow Acceleration = Change(Momentum, 3)
Normalized Flow Strength = (Cumulative Flow / Highest(ABS(Cumulative Flow), 100)) × 100
WHAT THIS SOLVES
Common Volume Indicator Problems:
- Volume spikes that don't move price (consolidation noise)
- Price moves on low volume that quickly reverse
- No differentiation between strong and weak volume signals
- Treating all high-volume bars equally regardless of context
- No measure of whether volume represents conviction or panic
Whale Flow Solutions:
- Requires both volume AND price impact for signals
- Conviction scoring separates strong moves from weak ones
- Cumulative flow shows persistent pressure vs isolated spikes
- Trend alignment and follow-through filter low-quality signals
- Tiered system lets traders choose their confidence threshold
LIMITATIONS
- Cannot identify individual whales or attribute volume to specific entities
- High volume can come from many sources (whales, retail panic, algo activity)
- Works best on liquid assets with consistent volume patterns
- Less reliable on low-volume assets or during market closures
- Conviction scoring thresholds may need adjustment per asset/timeframe
- Does not predict future whale activity, only identifies it after bars close
- Flow can remain at extremes longer than expected during strong trends
- False signals can occur during news events or earnings
- Not a standalone trading system - requires risk management and other analysis
Best used in combination with price action, support/resistance, and broader market context.
EDUCATIONAL VALUE
For traders learning about:
- Volume analysis beyond simple volume indicators
- Multi-factor signal confirmation systems
- Market regime and flow concepts
- Conviction-based scoring methodologies
- Cumulative indicator design
- Normalized plotting for cross-asset comparison
- Pine Script table and dashboard creation
Not financial advice.
趨勢分析
AlphaMACD - Adaptive MACD with Efficiency RatioOVERVIEW
AlphaMACD is an adaptive implementation of the classic MACD indicator that dynamically adjusts its calculation periods based on market efficiency. Unlike traditional MACD which uses fixed periods (typically 12, 26, 9), this indicator adapts its fast and slow EMA periods in real-time based on how efficiently the market is trending.
WHAT MAKES THIS ORIGINAL
This is not a simple MACD with different settings or colors. The core innovation is the adaptive period calculation using Kaufman's Efficiency Ratio, which was originally developed for the Adaptive Moving Average (AMA). This indicator applies that adaptive logic to MACD itself.
Key Differences from Standard MACD:
- Periods dynamically adjust between user-defined ranges (default: 8-21 for fast, 21-55 for slow)
- Uses Kaufman's Efficiency Ratio to measure market trendiness
- Implements gap protection to prevent extreme spikes from market gaps
- Includes market regime detection to filter signals in choppy conditions
- Provides multi-timeframe trend confirmation
HOW IT WORKS
1. Efficiency Ratio Calculation:
The indicator calculates market efficiency by comparing the absolute price change over a period to the sum of absolute price changes within that period. High efficiency = strong trending market. Low efficiency = choppy/sideways market.
2. Adaptive Period Adjustment:
- In trending markets (high efficiency): Periods move toward the minimum values for faster response
- In choppy markets (low efficiency): Periods move toward the maximum values for slower, more stable signals
- The "Sensitivity" parameter controls how aggressively periods adapt (0.5 to 5.0)
3. Gap Protection:
The custom adaptive EMA function detects abnormal price gaps (moves larger than 3x the typical ATR-based change) and limits their impact on the calculation. This prevents weekends or news gaps from causing extreme MACD spikes.
4. Signal Quality Filtering:
- Market regime detection identifies trending vs sideways conditions
- Momentum filter (RSI-based) prevents signals during overextended moves
- Signal strength calculation helps identify high-confidence setups
- Sideways market signals are marked with warning symbols
5. Multi-Timeframe Analysis:
The indicator compares current timeframe MACD with a higher timeframe (default 60 min) to provide context and filter against-trend signals.
HOW TO USE IT
Settings:
- Core Settings: Define the minimum and maximum periods for fast/slow EMAs
- Sensitivity: Higher values make the indicator more responsive to market changes
- Multi-timeframe: Set a higher timeframe for trend confirmation
- Visual options: Customize appearance and enable/disable features
Signal Interpretation:
- Strong bullish/bearish signals (large triangles): High-confidence entries in trending markets
- Warning signals (small ⚠): Crossovers in sideways markets - use caution or skip
- Divergence labels ("DIV"): Price and MACD diverging - potential reversal
- Background color: Green tint = trending market, Orange tint = sideways market
The Information Table shows:
- Current market regime (trending or sideways)
- Market efficiency percentage (how clean the trend is)
- Current adaptive fast and slow periods
- Higher timeframe trend direction
- Current signal strength
Best Practices:
- In trending markets: Trust strong signals, avoid warning signals
- In sideways markets: Reduce position sizes or skip trades entirely
- Use higher timeframe confirmation for better signal quality
- Adjust sensitivity based on your trading timeframe (higher for intraday, lower for swing)
TECHNICAL DETAILS
Calculation Method:
- Efficiency Ratio = ABS(Close - Close ) / SUM(ABS(Close - Close ), Period)
- Smoothed Efficiency = EMA(Efficiency Ratio, 5)
- Fast Period = Fast_Min + (Fast_Max - Fast_Min) × (1 - Smoothed_Efficiency × Sensitivity)
- Slow Period = Slow_Min + (Slow_Max - Slow_Min) × (1 - Smoothed_Efficiency × Sensitivity)
- Adaptive EMA uses standard EMA formula with gap detection and limiting
- MACD = Fast Adaptive EMA - Slow Adaptive EMA
- Signal = EMA(MACD, Signal Period)
- Histogram = MACD - Signal
The adaptive periods are calculated on every bar, so the MACD responds faster in trending conditions and stabilizes during consolidation.
WHAT THIS SOLVES
Standard MACD Problems:
- Fixed periods don't adapt to changing market conditions
- Too many false signals in sideways markets
- Whipsaws during low-volatility consolidation
- Price gaps can cause misleading spikes
AlphaMACD Solutions:
- Periods automatically adjust to market state
- Market regime filter identifies and warns about sideways conditions
- Adaptive smoothing reduces whipsaws
- Gap protection prevents false extremes
LIMITATIONS
- Like all indicators, this does not predict the future
- Requires trending markets for optimal performance
- Adaptive calculation means backtesting results will differ from fixed-period MACD
- More complex than standard MACD - requires understanding of adaptive concepts
- The adaptive periods mean you cannot directly compare this to traditional MACD studies
This indicator is best used as part of a complete trading system, not as a standalone signal generator.
EDUCATIONAL VALUE
For traders learning about:
- Adaptive indicators and market efficiency concepts
- Kaufman's Adaptive Moving Average principles applied to oscillators
- Market regime detection and signal filtering
- Gap handling in technical indicators
- Multi-timeframe analysis integration
Not Financial advice.
ONH, ONL, PDH, PDL [CleatsUp]Displays the Overnight High/Low values and Previous Day High/Low. Also works in replay mode.
(RSI + CCI) × (MACD/ATR)^2⚙️ (RSI + CCI) × (MACD / ATR)² Composite — Normalized, Compressed, Dynamic Colors
This advanced composite oscillator merges three powerful momentum indicators — RSI, CCI, and MACD — into one normalized and volatility-adjusted signal that reacts smoothly across all markets.
By dividing MACD by ATR (Average True Range), the indicator self-scales for different symbols, and an optional tanh-like compression prevents extreme spikes while keeping the movement fluid and responsive.
🧩 Core Formula
(RSI + CCI) × (MACD / ATR)²
(optionally passed through a tanh compression for stability)
RSI and CCI are normalized (RSI ÷ 50, CCI ÷ 100) → roughly −2 to +2 range.
MACD is volatility-adjusted by ATR → scale-independent between assets.
The result is centered around 0 for clear bullish/bearish momentum comparison.
🎨 Visual Features
🟢🔴 Dynamic 4-Color Histogram
Positive + Rising = Strong Teal
Positive + Falling = Light Teal
Negative + Falling = Strong Red
Negative + Rising = Light Red
🟡⚫ 4-Color Smoothing Line
Positive & Rising = Bright Yellow
Positive & Falling = Soft Yellow
Negative & Rising = Grey
Negative & Falling = Dark Grey
Zero-centered layout for intuitive bullish/bearish visualization.
⚙️ Adjustable Parameters
Individual RSI, CCI, and MACD lengths and sources.
ATR length for volatility normalization.
Optional tanh-style compression with adjustable gain (to keep values in ±1 range).
Fully customizable colors and line widths for both bars and smoothing line.
🔔 Alerts
Triggered automatically when the composite crosses above or below zero, signaling potential trend reversals or momentum shifts.
💡 How to Use
Composite > 0 → Bullish momentum ↑
Composite < 0 → Bearish momentum ↓
A brightening line or bar = momentum accelerating.
A fading color = momentum weakening or reversal forming.
Combine with higher-timeframe trend filters (EMA, VWAP, Supertrend) for confirmation.
ZynAlgo S&R ProZynAlgo S&R Pro™ automatically identifies high-probability support and resistance zones by detecting swing highs and lows, visualizing liquidity areas where large market participants are likely active.
The indicator dynamically draws and updates these levels in real time, providing traders with an instant map of market structure — where price is most likely to react, reverse, or break through.
It’s built for traders who rely on structure-based trading, smart money concepts (SMC), and liquidity-based analysis, offering a clean, efficient, and objective way to view market levels without manual charting.
⚙️ CORE CONCEPT
Markets move through cycles of liquidity — sweeping previous highs and lows before establishing new structure.
S&R Pro captures these key points automatically, creating clear horizontal levels that represent potential liquidity zones and high-probability reaction areas.
Every zone is drawn dynamically using confirmed swing highs and lows, ensuring that the indicator adapts to evolving price action while keeping your charts clean and uncluttered.
🧩 FEATURES
Automatic Detection of swing highs/lows based on user-defined sensitivity
Liquidity Pool Visualization for both buy-side and sell-side zones
Dynamic Extension Lines that update until new structure forms
Customizable Styling: color, line width, and line type
Candle Coloring System to enhance visual clarity of price action
Smart Alerts for liquidity sweeps and swing confirmations
Lightweight & Fast Rendering — optimized for all market types
🧠 HOW TO USE
Add the indicator to your chart and adjust “Left/Right Bar” to control how sensitive swing detection is.
Liquidity lines (red for buy-side, blue for sell-side) will automatically appear and extend until new structure is formed.
Watch how price interacts with these lines — reactions often occur near recent liquidity zones.
Combine with your existing confluence tools such as trend dashboards or volume filters to refine entries and exits.
Set alerts for when liquidity zones are reached or when new swing points form.
📊 INTERPRETATION
🟥 Red Lines: Previous highs, representing buy-side liquidity (potential stop hunts above).
🟦 Blue Lines: Previous lows, representing sell-side liquidity.
🟢 Candle Color Change: Visualizes shifts in short-term momentum relative to previous close.
These levels help traders spot where liquidity sweeps may occur — a key concept in institutional trading and SMC methodology.
⚙️ CUSTOMIZATION
Adjust bar sensitivity to detect major or minor structures
Modify line color, style, and thickness
Toggle swing labels and liquidity visualization
Control candle color behavior (body, border, wick)
🔶 CONCLUSION
We believe that success lies in the association of the user with the indicator, opposed to many traders who have the perspective that the indicator itself can make them become profitable. The reality is much more complicated than that. The aim is to provide an indicator comprehensive, customizable, and intuitive enough that any trader can be led to understand this truth and develop an actionable perspective of technical indicators as support tools for decision making. You can see the Author's instructions below to get instant access to this indicator
🔶 RISK DISCLAIMER
Trading is risky & most day traders lose money. All content, tools, scripts, articles, & education provided by ZynAlgo are purely for informational & educational purposes only. Past performance does not guarantee future results.
AtroNox GOD Mode v8 - Professional AtroNox GOD Mode v8 - Professional Trading Strategy
Overview
AtroNox GOD Mode v8 is an advanced trading strategy that combines dynamic Bollinger Band analysis with proprietary trend detection algorithms. The strategy features six-tier take profit management, multiple filtering systems, and optional integration with PineConnector for automated trading through MetaTrader platforms.
Key Features & Originality
1. GOD Mode Signal Generation System
- **Proprietary Trend Detection**: Custom algorithm that analyzes Bollinger Band breakouts with dynamic trend line generation
- **Adaptive Trend Line**: Automatically adjusts support/resistance levels based on market structure
- **Dual Confirmation**: Combines price action with trend direction changes for high-probability signals
2. Six-Tier Take Profit System
- **Progressive Profit Taking**: Six distinct take profit levels for optimal position management
- **Flexible Sizing**: Customizable position allocation across all six targets
- **Dual Calculation Methods**: Choose between ATR-based or percentage-based targets
- **Dynamic Adjustment**: Targets automatically scale based on market volatility
3. Advanced Market Filtering
Multiple filter options to adapt to different market conditions:
- **ATR Filter**: Entry only when volatility exceeds moving average threshold
- **RSI Filter**: Entry based on momentum extremes
- **Combined Filters**: ATR OR RSI, ATR AND RSI options
- **Flat Market Detection**: Option to trade only in ranging markets
- **No Filtering**: For trending market conditions
4. PineConnector Integration (Optional)
- **MT4/MT5 Compatibility**: Direct integration with MetaTrader platforms
- **Automated Execution**: Sends trade signals directly to your broker
- **Custom Lot Sizing**: Adjustable position sizes for different account types
- **Pip Multiplier Configuration**: Supports Forex, Gold, Indices, and other instruments
5. Enhanced Position Management
- **Intelligent Reversal Handling**: Automatically closes opposite positions before new entries
- **State Tracking**: Monitors position transitions to prevent conflicts
- **Multi-Level Exit Logic**: Progressive profit taking with remainder management
- **Dynamic Stop Loss Options**: ATR-based, percentage-based, or trendline-based stops
How to Use
Initial Setup
1. **Authentication**: Enter "GOD FX" in the authentication field to activate the strategy
2. **Direction Selection**: Enable/disable long and short trades based on your preference
3. **Filter Configuration**: Choose appropriate market filter for current conditions
4. **Risk Management**: Configure TP/SL method (ATR or percentage-based)
Parameter Configuration
GOD Mode Core Settings
- **Sensitivity (default: 100)**: Bollinger Band period - higher values create smoother signals
- **Offset (default: 1.5)**: Band deviation multiplier - adjusts signal sensitivity
Take Profit Configuration
- **Six TP Levels**: Configure multipliers or percentages for each level
- **Position Sizing**: Allocate percentage of position to close at each TP
- **Method Selection**: Choose between ATR-based or percentage-based calculations
Market Filters
- **RSI Settings**: Configure period and threshold levels
- **ATR Settings**: Adjust length and moving average parameters
- **Filter Type**: Select based on current market behavior
Signal Interpretation
- **GOD LONG/SHORT Labels**: Primary entry signals with clear visual markers
- **Trend Line Color**: Visual representation of current trend direction
- **Dashboard Display**: Real-time position status and performance metrics
- **TP Level Lines**: Visual targets displayed when in position
Important Considerations
Strategy Limitations
- **No Guarantee of Future Performance**: Past results do not predict future outcomes
- **Market Dependency**: Performance varies significantly with market conditions
- **Volatility Impact**: High volatility can trigger premature exits
- **Slippage and Fees**: Real trading involves costs not reflected in backtesting
### Risk Warnings
- **Capital at Risk**: Trading involves substantial risk of loss
- **Leverage Warning**: Using leverage magnifies both profits and losses
- **Not Investment Advice**: This tool is for educational purposes only
- **Thorough Testing Required**: Always test on demo accounts before live trading
- **Regular Monitoring Needed**: Automated strategies require ongoing supervision
Technical Components
Core Indicators
- **Modified Bollinger Bands**: Custom deviation calculation with adjustable parameters
- **Dynamic Trend Line**: Proprietary algorithm for trend direction
- **RSI (Relative Strength) Index)**: Momentum confirmation
- **ATR (Average True Range)**: Volatility measurement and target calculation
Position Management Features
- **Progressive Take Profits**: Six levels with customizable allocation
- **Multiple Stop Loss Options**: ATR, percentage, or trendline-based
- **Reversal Detection**: Automatic position flipping on opposite signals
- **State Management**: Tracks position status to prevent conflicts
PineConnector Setup (Optional)
Requirements
- Active PineConnector license
- MetaTrader 4 or 5 with EA installed
- Proper symbol configuration matching broker format
- Correct pip multiplier settings for your instruments
Configuration Guide
1. Enable PineConnector in strategy settings
2. Enter your unique Connector ID
3. Input exact symbol name as shown in MT4/MT5
4. Set appropriate lot size for your account
5. Configure pip multiplier (100 for Gold/Indices, 10000 for Forex majors)
Performance Dashboard
Real-Time Metrics
- **Position Status**: Current direction and entry price
- **P&L Display**: Live profit/loss percentage
- **Trend Status**: Current GOD Mode trend direction
- **RSI Value**: Current momentum reading
- **Performance Stats**: Win rate, total trades, net profit
TP Status Tracking
- Visual indicators for each completed take profit level
- Position management status display
- PineConnector connection status (if enabled)
Recommended Usage
Best Practices
1. **Start with Demo**: Test thoroughly on demo account for at least 30 days
2. **Small Position Sizes**: Begin with minimum lot sizes when going live
3. **Market Selection**: Test on different instruments to find best performers
4. **Regular Review**: Monitor and adjust parameters based on performance
5. **Risk Management**: Never risk more than 1-2% per trade
Timeframe Recommendations
- **Scalping**: 1-minute to 5-minute charts with tight targets
- **Day Trading**: 15-minute to 1-hour charts with standard settings
- **Swing Trading**: 4-hour to daily charts with wider targets
- **Position Trading**: Weekly charts with maximum target distances
ZynAlgo Trend Dashboard MiniZynAlgo Trend Dashboard™ is a professional-grade tool designed to simplify multi-timeframe trend analysis and bring visual clarity to any trading setup.
It instantly shows who’s in control — buyers or sellers — across all key timeframes, allowing traders to make faster and more confident decisions based on overall market direction.
Developed using advanced Pine Script architecture, this indicator provides a clean and efficient interface that can be used on its own or combined with other ZynAlgo tools for enhanced market confluence.
⚙️ CORE CONCEPT
Trends are rarely aligned across timeframes — that’s why most traders get caught trading against higher-timeframe momentum.
ZynAlgo Trend Dashboard™ solves this by displaying a synchronized overview of the market’s directional bias, from short-term to long-term, within a single compact panel.
Each timeframe is evaluated using one of three models that can be toggled according to user preference:
MA Cross Model: Detects when short-term momentum shifts in relation to the dominant trend.
Price vs Baseline Model: Highlights when price behavior transitions above or below a defined average baseline.
Momentum Model: Measures relative strength within adjustable thresholds to identify overextended or recovering market conditions.
Every timeframe is color-coded — 🟢 Bullish, 🔴 Bearish, 🟡 Neutral — providing an immediate read of trend alignment and potential turning points.
🧩 FEATURES
Multi-timeframe trend confluence panel (supports up to 9 custom timeframes)
Adjustable calculation models (MA, Price, or Momentum)
“Overall Trend” summary bar for quick bias identification
Clean interface optimized for all chart backgrounds
Custom color themes and dashboard placement controls
Detailed / Compact / Minimal display modes
Alert system for full or partial trend alignment
Lightweight and resource-efficient performance
🧠 HOW TO USE
Select your preferred signal mode (MA, Price, or Momentum).
Enable the timeframes you want to monitor.
Observe dashboard colors for alignment:
• When most timeframes turn 🟢 → uptrend confirmation.
• When most turn 🔴 → downtrend alignment.
Combine the Overall Trend with your entry strategy or confirmation tools.
Set alerts to receive notifications whenever confluence conditions are met.
📊 INTERPRETATION
Full Alignment: High probability of sustained directional momentum.
Mixed Signals: Possible consolidation or transition; exercise patience.
Sudden Shift: Early sign of momentum reversal or structural change.
This indicator is not intended to generate buy or sell orders.
It’s designed to clarify directional context, helping traders avoid low-probability setups and focus on trades aligned with dominant market flow.
⚙️ CUSTOMIZATION
Configure dashboard size, transparency, and layout
Select preferred average type (EMA, SMA, HMA, etc.)
Adjust baseline lengths and sensitivity
Switch between dark/light UI themes
Enable or disable Overall Trend aggregation
⚠️ DISCLAIMER
Trading involves substantial risk and is not suitable for every investor.
All information and tools provided by ZynAlgo are intended for educational and analytical purposes only. Past performance does not guarantee future results.
🔶 CONCLUSION
We believe that success lies in the association of the user with the indicator, opposed to many traders who have the perspective that the indicator itself can make them become profitable. The reality is much more complicated than that. The aim is to provide an indicator comprehensive, customizable, and intuitive enough that any trader can be led to understand this truth and develop an actionable perspective of technical indicators as support tools for decision making. You can see the Author's instructions below to get instant access to this indicator
🔶 RISK DISCLAIMER
Trading is risky & most day traders lose money. All content, tools, scripts, articles, & education provided by ZynAlgo are purely for informational & educational purposes only. Past performance does not guarantee future results.
Reversal Zones — entry + anchored exit + alerts (fixed)Script Description — Reversal Zones (Entry + Anchored Exit + Alerts)
This indicator automatically identifies potential reversal points in price action using a pattern of 4–5 consecutive candles in one direction followed by a reversal candle.
It then calculates dynamic Buy and Sell Zones based on the average range of recent candles and plots them visually on the chart — helping you identify ideal entry and exit zones with clean precision.
⚙️ How It Works
Pattern Detection:
Looks for 4–5 consecutive candles of the same color (bullish or bearish).
When the next candle reverses direction, that point becomes the reference candle.
Zone Calculation:
Takes the average of the last N candle ranges (default = 5).
X = Average candle range
Y = X ÷ Divisor (default = 10)
Plots:
BUY Zone – Below the low of the bullish reversal candle
(two lines: Low - X and Low - X - Y)
SELL Zone – Above the high of the bearish reversal candle
(two lines: High + X and High + X + Y)
Anchored Zones:
After a Buy signal, the indicator monitors for a new swing high and anchors a Sell zone there.
After a Sell signal, it monitors for a swing low and anchors a Buy zone there.
The original entry zone remains visible and is never overwritten.
Zone Extension:
Each zone extends to the right for a configurable number of bars (extendBars, default = 20).
🔔 Alerts
The script includes built-in alert conditions:
Buy Zone Hit → Triggers when price enters/touches any Buy Zone (entry or anchored).
Sell Zone Hit → Triggers when price enters/touches any Sell Zone (entry or anchored).
You can create alerts by:
Clicking Add Alert (🔔) on the chart.
Selecting this script as the condition.
Choosing Buy Zone Hit or Sell Zone Hit.
Setting alert frequency to “Once Per Bar Close”.
🎨 Customizable Inputs
Candle count (N) → Number of candles used to calculate average range.
Divisor → Controls Y distance (refines zone width).
Extend lines right → Number of bars to extend each zone line.
Minimum / Maximum consecutive candles → Controls pattern sensitivity.
Colors, line width, and label visibility are all adjustable.
💡 Best Use Cases
Identify reversal entry zones in trend exhaustion areas.
Combine with volume spikes or RSI divergence for confluence.
Use alerts for potential option writing or countertrend setups.
🧩 Credits
Created by Neeraj Sakharkarr
Designed for traders who want clean, rule-based reversal setups with automatic entry/exit zones.
Previous Candle 50% line The intention of this is to mark the 50% mark of the previous candle. My use is to set stops and to spot reversals coming from the STRAT to see in real time 2's going 3
TREND (Type II) | Hamster-CoderTREND (Type II) — Smart Trend Reversal Indicator Based on RCI & MACD
TREND (Type II) is a powerful tool for traders who want to spot not just where the market is now, but where it might be heading next.
It combines the analytical strength of RSI and MACD to identify potential trend reversal points before they become obvious on the chart.
🚀 Key Advantages
Early trend detection. TREND can anticipate possible reversals even before the actual crossover occurs.
Flexible visualization. Displayed in a separate panel while showing buy/sell signals directly on the main chart.
Multi-timeframe support. Analyze signals from higher or lower timeframes without switching charts.
Intuitive color background. The background automatically turns red during bearish conditions for instant market sentiment recognition.
🎯 Signal Types
Primary Signal. When RCI and MACD lines actually cross, confirming a trend shift.
Preliminary Signal. When a crossover is projected to occur on the next bar.
Overheat Signal. When the market reaches a defined threshold (e.g. ±90) and starts showing signs of cooling down.
🧠 Unique Features
Extra Filters (experimental). Filters out weak or false signals, showing only those confirmed by additional criteria.
RCI–MACD Difference Mode. Visualize the distance between RCI and MACD as a histogram to assess divergence strength.
Custom Thresholds. Define your own overbought/oversold zones to fine-tune signal sensitivity.
🔍 Who It’s For
TREND (Type II) is ideal for traders who:
seek dynamic entry and exit points without lagging indicators;
want visual and statistical confirmation of trend changes;
build multi-layered strategies requiring signal validation.
💬 Use TREND (Type II) to see the market one step ahead.
This isn’t just another indicator — it’s an early warning system for potential trend reversals .
ADX Scanner with IndicatorsA screener that will allow you to enter up to 10 stocks. The goal is to see clearly in front of you what stocks are moving and the momentum leveraging the ADX and RSI. The return for the day shows the growth or loss of those moves.
ADX Scanner with IndicatorsA screener that will allow you to enter up to 10 stocks. The goal is to see clearly in front of you what stocks are moving and the momentum leveraging the ADX and RSI. The return for the day shows the growth or loss of those moves.
CMF, RSI, CCI, MACD, OBV, Fisher, Stoch RSI, ADX (+DI/-DI)
Stoch RSINine indicators in one, CMF, RSI, CCI, MACD, OBV, Fisher, Stoch RSI, ADX (+DI/-DI) You can use whichever of the nine indicators you want. I use CFM, CCI, MACD, Stoch RSI.
Cross3x v2Cross3x – Smart Trend & Rejection Detection System
Cross3x is a precision trading indicator designed for traders who combine trend-following with early reversal detection. Built on a triple moving average core, it delivers high-quality signals with minimal noise and maximum clarity.
Core Features:
Trend Filtered Crossover: Uses a fast EMA (18), slow EMA (33), and long-term SMA (99) to generate reliable entry signals only in the direction of the dominant trend.
Dynamic SL/TP/BE Management:
Stop Loss placed at the lowest/highest extreme over a user-defined lookback.
Take Profit calculated using a customizable Risk/Reward ratio.
Break-Even level set as a percentage between entry and TP (e.g., 10% = BE just above entry).
Early Rejection Signals: Flags potential reversals when price tests a moving average with a long wick during a countertrend candle — ideal for spotting pullbacks before the next leg.
Green flag: "Potential Long Setup" after a bullish rejection.
Red flag: "Potential Short Setup" after a bearish rejection.
Confirmation Points: Circles appear when price retraces cleanly after a crossover, signaling optimal entry zones.
Interactive Dashboard: Real-time table showing current signal, SL, and TP levels.
Customizable Alerts: Fully configurable alerts for entries, confirmation points, and rejection setups.
Why Use Cross3x?
It doesn’t just follow trends — it anticipates them. By combining classical crossovers with smart rejection logic and structured risk management, Cross3x helps you enter earlier, manage risk better, and stay aligned with market momentum.
Perfect for swing traders, intraday scalpers, and algorithmic strategies seeking a clean, robust foundation.
Usage Tips:
Combine "Potential" flags with order blocks or key levels for higher accuracy.
Use confirmation circles as entry triggers after early setups.
Adjust RR and BE% based on volatility and trading style.
Deploy Cross3x to turn simple crossovers into a complete trading methodology.
Trading SignalsThis script is designed to help identify high-probability trend reversal and continuation signals by combining moving average crossovers with momentum confirmation.
✨ How It Works:
EMA 200 — plots the 200-period Exponential Moving Average (EMA) of the closing price.
EMA-based SMA 200 — applies a 200-period Simple Moving Average (SMA) on top of the EMA values for smoother trend tracking.
Relative Strength Index (RSI) (Length 100) is used as a momentum filter to avoid false signals.
🟢 Buy Signal Conditions:
EMA 200 crosses above the EMA-based SMA 200.
RSI (100) is greater than 52, confirming bullish momentum.
🔴 Sell Signal Conditions:
EMA 200 crosses below the EMA-based SMA 200.
RSI (100) is less than 48, confirming bearish momentum.
Multi Length Market Structure (BoS + ChoCh)█ OVERVIEW
The "Multi Length Market Structure (BoS + ChoCh)" indicator is a technical analysis tool that identifies key pivot points on the chart and signals market structure breaks (Break of Structure - BoS) and changes in market character (Change of Character - ChoCh). It is designed for traders employing market structure-based strategies, enabling the identification of critical support and resistance levels and potential trend reversal points. The indicator offers flexible pivot length settings, customizable colors, and labels, ensuring clarity and precision on the chart.
█ CONCEPTS
The indicator was developed to simplify the identification of changes in market structure, catering to both short-term and longer-term trading strategies. To this end, it simultaneously displays breakouts for four editable pivot lengths. The lengths represent the delay, measured in the number of candles, after which a pivot is recognized. Pivots with larger values are often turning points on higher timeframes, providing a broader view of the market.
Why are BoS and ChoCh important? A Break of Structure (BoS) indicates trend continuation when the price breaks a key level (e.g., a previous high or low). A Change of Character (ChoCh) signals a potential trend reversal when the price breaks a level in the opposite direction of the prior trend. These signals help traders identify moments when the market changes its dynamics, which is crucial for price action strategies.
█ FEATURES
- Pivot Detection: Identifies pivot points (highs and lows) based on four different pivot lengths (default: 5, 10, 15, 20), enabling market structure analysis with varying sensitivity.
- BoS and ChoCh Signals: Generates Break of Structure (BoS) signals in the form of triangles (green for bullish, red for bearish) and Change of Character (ChoCh) signals when the price breaks a key level in the opposite direction of the prior trend.
- Pivot Labels: Displays labels for highs (HH - Higher High, LH - Lower High) and lows (HL - Higher Low, LL - Lower Low) with the option to select which pivot to display them for.
- Customizable Colors and Styles: Allows configuration of colors for BoS and ChoCh signals and pivot labels.
- Alerts: Built-in alerts for BoS and ChoCh signals for each pivot length, including price and signal type descriptions.
█ HOW TO USE
Adding to the Chart: Add the indicator to your TradingView chart via the Pine Editor or Indicators menu.
Configuring Settings:
- Pivot Lengths: Set four different pivot lengths (Pivot Length 1-4, default: 5, 10, 15, 20) to adjust the sensitivity of pivot detection. Shorter lengths are more sensitive, while longer lengths are more significant. If you want to use only one length, set all pivot lengths to the same value.
- Colors and Styles: Configure colors for BoS signals (green for bullish, red for bearish) and pivot labels.
- Labels: Enable/disable the display of HH/HL/LH/LL labels and choose which pivot to display them for (Pivot 1-4 or none).
- Signals: BoS and ChoCh signals are displayed as triangles (upward for bullish BoS, downward for bearish). Alerts can be configured for each signal type.
Interpreting Signals:
- Bullish BoS Signal: A green triangle below the candle indicates a breakout above a previous high, suggesting bullish trend continuation.
- Bearish BoS Signal: A red triangle above the candle indicates a breakout below a previous low, suggesting bearish trend continuation.
- Bullish ChoCh Signal: A green triangle after breaking a high in a downtrend indicates a potential reversal to bullish.
- Bearish ChoCh Signal: A red triangle after breaking a low in an uptrend indicates a potential reversal to bearish.
- Pivot Levels: Use pivot points as dynamic support and resistance levels. Levels from longer pivots carry greater significance.
Combine signals with other technical analysis tools, such as RSI (to identify overbought/oversold conditions) or MACD (to confirm momentum). Analyze market structure on higher timeframes for stronger signals. Be particularly cautious when entering positions if RSI approaches overbought/oversold zones and divergences appear, as this may indicate a trend change.
█ APPLICATIONS
- Breakout Strategies: Trade based on BoS signals indicating trend continuation. A BoS signal after breaking a high in an uptrend may suggest a strong bullish impulse, especially when supported by a rising MACD.
- Reversal Strategies: ChoCh signals may indicate a potential trend reversal, particularly when confirmed by other indicators, such as RSI divergences or Fibonacci levels.
Cross3xCross3x – Early Rejection & Crossover Detection System
Cross3x is a powerful yet intuitive trading tool designed for traders who want early signals with structured risk management.
Built around a dual EMA crossover (18 & 33), it generates entry signals on every crossover and crossunder — no trend filter interference. The long-term SMA 99 provides context but doesn’t block valid setups.
Key Features:
Unfiltered Entries: Triangles appear on every EMA 18/33 crossover, ideal for catching reversals early.
Smart SL/TP/BE:
SL based on recent extremes (configurable lookback).
TP using adjustable Risk/Reward ratio (default 2:1).
BE level set at a % between entry and TP (e.g., 10% = just above cost).
Early Rejection Signals: Diamonds highlight potential reversals when price tests a moving average with a long wick during a countertrend candle:
🟩 Green diamond below bar → Potential Long Setup
🟥 Red diamond above bar → Potential Short Setup
Confirmation Points: Circles appear when price retraces properly after a crossover, marking optimal entry zones.
Real-Time Dashboard: Dynamic table shows current signal, SL, and TP levels.
Customizable Alerts: Enable alerts per signal type for timely execution.
Why Traders Love Cross3x:
It combines simplicity with intelligence. Whether you're scalping, swing trading, or building an algo strategy, Cross3x gives you clarity, timing, and discipline in one compact package.
Use the diamonds to anticipate moves, the triangles to confirm momentum, and the confirmation circles to refine entries — all backed by precise risk controls.
Perfect For:
Breakout traders
Pullback hunters
Price action + MA confluence strategies
Deploy Cross3x to turn basic crossovers into a complete edge.
BTC — CVD Divergence (Spot & Perp, robuste v6)If the price is above the CVD, it usually means the move is being pushed by leverage rather than real buying — the market is stretched and at risk of a correction.
If the price is below the CVD, it suggests that buyers are quietly absorbing — pressure is building for a bullish recovery once leverage clears out.
Supertrend Strategy With Multi Tp & TslHello Traders,
This strategy is based on the popular Supertrend indicator, which many traders use as a simple trend-following tool. The core entry logic is straightforward:
Buy (Long) when the price closes above the Supertrend line.
Sell (Short) when the price closes below the Supertrend line.
However, trading success isn’t only about entries — proper risk management makes all the difference. That’s why this strategy includes four stop-loss methods, two take-profit types, and a trailing stop-loss system. You can customize all of these settings to create your own personalized version.
🛑 Stop-Loss Methods
Tick – Uses the instrument’s smallest price increment. Ideal for tick-based markets such as Futures or Forex.
Percent – Defines the stop-loss as a percentage of entry price. Commonly used in Crypto trading.
ATR – Uses the Average True Range value to determine stop-loss distance. Perfect for adapting to changing market volatility.
Supertrend – The stop-loss level is set at the Supertrend line value at the time of entry.
🔁 Trailing Stop-Loss & Reverse Signals
Trailing SL: If enabled, the chosen stop-loss method will trail the price dynamically from the moment the position opens.
Close with Reverse Signals: When activated, the current position closes and reverses on an opposite signal. If disabled, the strategy waits until the current position is closed before opening a new one.
🎯 Take-Profit Options
Tick – Set a fixed take-profit level based on tick distance.
Percent – Set take-profit based on a percentage change from entry.
Ratio – Sets take-profit based on the entry-to-stop-loss distance × ratio value.
Each take-profit method allows you to define the percentage of position to close at that level.
⚖️ Breakeven Option
When Breakeven is enabled, after the first take-profit is triggered, the stop-loss automatically moves to the entry level, protecting your capital.
⚙️ Additional Settings
Position Type: Choose between Long only, Short only, or Both directions.
Session Filter: Trade only during specific time ranges. Activate this option and set your desired session hours (make sure to select your correct timezone).
📈 Visuals
The strategy plots entry, stop-loss, and take-profit levels directly on the chart, allowing you to clearly visualize your trades and manage them effectively.
Feel free to ask any questions or suggest improvements — this strategy is built for flexibility and experimentation!
Fusion Screener📘 Fusion Screener (MA + Oscillator + Range Breakout + Angle Filter + Trailing Alerts)
The Fusion Screener is a technical-analysis study that combines multiple indicator categories into one framework.
It evaluates moving-average alignment, oscillator conditions, range separation, and angle thresholds, and it optionally issues time- or structure-based trailing alerts.
The script is intended for screening and chart-based analysis, not for generating trading or investment advice.
🔧 Main Components
Moving-Average Votes – Calculates five moving averages (10 – 200 periods) on a selected analysis timeframe and counts how many are positioned above or below the current price.
Oscillator Votes – Evaluates RSI, MACD, and Momentum on the same timeframe and counts bullish or bearish readings.
Higher-Timeframe Filter – Optionally checks the relationship between price and an EMA on a higher timeframe to provide directional context.
Range-Breakout Logic – Compares two customizable moving averages and determines whether price has moved outside a defined separation threshold.
Angle Filter – Estimates the slope (in degrees) of a chosen moving average and filters conditions that do not meet the minimum angle requirement.
Trailing Alerts – Generates optional time-based or structure-based reminder alerts after entries occur, according to user-defined intervals or pivot behavior.
⚙️ User Inputs
Analysis Timeframe – Selects the timeframe used for MA and oscillator calculations.
Min MA Votes / Min Oscillator Votes – Minimum number of bullish or bearish readings required to satisfy each group.
Higher-Timeframe Confirmation – Enables or disables the directional EMA filter from a separate timeframe.
Range MA Type / Lengths / Threshold – Parameters controlling the range-breakout comparison.
Angle Filter Settings – Type, length, slope-lookback, and minimum angle (degrees).
Trailing Alerts – Options for bar-based or structure-based trailing reminders, including repetition behavior and pivot lookback length.
Show Signals – Toggles on-chart markers for informational visualization.
🖥️ Outputs
On-chart shapes marking informational “buy,” “strong buy,” “sell,” and “strong sell” conditions when corresponding criteria are met.
Exit markers when prior conditions no longer hold.
Flags when time- or structure-based trailing alerts are triggered.
Built-in alert conditions that can be linked through the TradingView alert interface.
📊 Technical Notes
Uses request.security() for multi-timeframe data retrieval.
Does not repaint past bars once higher-timeframe candles have closed.
Intended for monitoring the coexistence of several technical factors within a single script.
No part of this study constitutes financial or trading advice; it provides analytical data for chart observation only.
BTC OHLC by tncylyvBTC OHLC Projection Levels
📜 Indicator Description
This indicator projects key potential price levels for Bitcoin (BTC) based on historical price behavior. Using the opening price of a user-selected timeframe (4H, 1D, or 1W) as a baseline, it calculates and displays statistically-derived levels for potential "Manipulation" and "Distribution" phases of price action.
These projections are designed to provide traders with potential zones of interest for support, resistance, stop-loss placement, and take-profit targets for the current trading period.
________________________________________
🧠 Core Concepts Explained
The indicator is built on two key concepts derived from candlestick analysis:
• Manipulation: This represents the initial price movement that occurs against the candle's eventual primary direction.
o For a bullish candle, it's the extent of the lower wick (the move from Open down to Low).
o For a bearish candle, it's the extent of the upper wick (the move from Open up to High).
o The "M" levels on the chart project the average (mean and median) historical size of this manipulation wick, suggesting potential areas for liquidity grabs or stop hunts.
• Distribution: This represents the primary price movement in the direction of the candle's trend.
o For a bullish candle, it's the total move from Open to High.
o For a bearish candle, it's the total move from Open to Low.
o The "D" levels project the average (mean and median) historical range of this price expansion, suggesting potential targets for the period.
________________________________________
📊 Data & Methodology
It is important to note that the statistical ratios used for the projections are not calculated in real-time by the indicator itself.
These values have been pre-calculated through an extensive historical analysis performed in Python. The analysis used the complete historical BTC/USD price data from the Coinbase exchange to determine the mean and median ratios for both manipulation and distribution across the different timeframes. The resulting fixed values are then hard-coded into the script to ensure performance and consistency.
________________________________________
⚙️ How to Use It
At the beginning of each new period (e.g., at the start of a new day on the 1D timeframe), the indicator will draw a new set of horizontal lines and zones based on that period's opening price.
• The central dotted line represents the Opening Price for the selected timeframe.
• Manipulation Levels (+M / -M): These inner levels can be interpreted as potential reversal zones. Price may test these areas to trigger stops before moving in the primary direction for the session.
• Distribution Levels (+D / -D): These outer levels can be used as potential take-profit targets, representing the average historical price extension for a period.
• Mean vs. Median Zones: The script plots levels based on both the historical mean (average) and median (middle value). The shaded area between them creates a zone rather than a single price line, offering a more practical range for analysis.
________________________________________
🛠️ Settings and Features
• Projection Timeframe: Select the primary timeframe for the analysis (4H, 1D, or 1W). The historical data used for projections is specific to the chosen timeframe.
• Historical Periods to Show: Adjust how many past periods of data you want to see on your chart. A value of 1 will only show the projections for the current, active period.
• Timezone (UTC-4): The 4H calculations are based on a fixed UTC-4 timezone to align with specific, high-volume market sessions (e.g., New York open). This is not changeable to ensure data consistency.
• Visual Customization: You have full control over the appearance of the indicator.
o Toggle the visibility, colors, and line styles for the Open price line and each of the Manipulation/Distribution levels using their respective checkboxes and inputs.
o Enable or disable the shaded fills between the mean and median levels.
o Tip: To quickly hide all price labels at once, edit the "Label Color" setting and set its opacity to 100% (fully transparent).
Spot vs Leverage — Lite (QQQ/NQ) The indicator works like a thermometer for the quality of a market move.
Score > +20 → “Spot dominant”
👉 The rise (or price stability) is supported by real buying:
strong cash/ETF/equity inflows,
positive price–volume correlation,
low or negative basis (futures aren’t artificially pulling price up).
→ This is a healthy, structurally solid rally.
Score < −20 → “Leverage dominant”
👉 The move is mostly driven by leverage:
overbought futures,
options speculation,
weak spot volume.
→ The trend is fragile — it can collapse quickly if leveraged positions unwind (deleverage, inverse short squeeze, etc.).
Zone between −20 and +20 → Neutral / mixed
→ The market is balanced — neither purely “air” nor purely “cash.”
