Combined Continuational Signal - RSI & KeltnerContinuational Signal Indicator
This technical indicator provides trend continuation signals through dual-methodology analysis, offering traders flexibility to choose between RSI-based or Keltner Channel-based signal generation, or utilize both simultaneously for enhanced confirmation.
Core Functionality:
Dual Signal Architecture: Toggle between RSI momentum analysis or Keltner Channel volatility breakout detection
Multi-Confirmation Framework: Incorporates moving average trend filters, slope analysis, and candle pattern validation
Cloud Interaction Filter: Signals activate only when price interacts with the moving average cloud zone
MA Closeness Filter: Uses ATR-based filtering to avoid signals during low-volatility consolidation periods
Signal Logic:
The indicator waits for overbought/oversold conditions (RSI) or band extremes (Keltner), confirms directional bias through slope analysis, validates trend alignment via moving average positioning, then triggers signals on specific candle formations with engulfing characteristics.
Customization Options:
Adjustable RSI parameters and threshold levels
Configurable Keltner Channel settings with multiple calculation methods
Multiple moving average lengths for trend and slope analysis
Various display modes (shapes, backgrounds, candle coloring, vertical lines)
Comprehensive alert system for all signal types
Risk Management Integration:
Built-in filters prevent signals during choppy market conditions and ensure alignment with higher-timeframe trend direction before activation.
Use in conjunction with other confluent variables for optimal results. The default settings are calibrated for specific market conditions, though experimentation with parameters is recommended for different trading styles and timeframes.
波動率
FX Strike — EMAs + ATR Trailing StopsThe FX Strike Overlay combines three key moving averages with ATR-based trailing stops to create a clear, rule-based trading framework.
EMAs (200, 50, 20): Define macro trend, active trend, and entry trigger.
ATR Trailing Stop: Adapts dynamically to volatility to manage stop-loss placement and trend exits.
Pullback Zone Shading (20↔50): Highlights high-probability continuation areas.
Flip Markers & Alerts: Optional signals when price crosses the ATR trail or reclaims the 20 EMA in trend.
How to Use:
Follow the 200/50 EMA alignment for trend bias.
Look for pullbacks to the 50 EMA and reclaims of the 20 EMA for entries.
Place stops at the ATR trail line, and let it manage exits dynamically.
Use with Volume Profile or support/resistance levels for profit targets.
This tool was designed with a clean black/gold theme for traders who value simplicity, discipline, and clarity.
ADR(20)% - Qullamagi (corner value) v6This indicator displays the 20-bar Average Daily Range (ADR) either as a percentage of price or in raw dollar terms, shown in a clean corner box on the chart.
Switch between % ADR and $ ADR with a single checkbox.
Place the output box in any chart corner.
Useful for volatility assessment, stop-loss sizing, and stock selection.
Inspired by the trading approach of Kristjan Qullamägi (Qullamaggie), who uses ADR(20) both to filter high-momentum stocks and to size risk (stops should generally be ≤ 1×ADR).
ADR(20)% - Qullamagi (corner value) v6Description:
This indicator calculates the 20-day Average Daily Range (ADR) as a percentage (or in raw $) and displays it in a clean corner table on the chart.
Formula: average of (High ÷ Low – 1) over the last 20 bars.
Use % or $ mode via settings.
Position the box in any chart corner.
Inspired by Kristjan Qullamägi (Qullamaggie), who uses ADR to filter strong movers and size stop-losses (stops should generally be ≤ 1×ADR).
ADR(20) % ValueDisplays the 20-day Average Daily Range (ADR) as a % of price, following the method popularized by Kristjan Qullamägi (Qullamaggie). The ADR value updates dynamically and is printed directly on the chart for quick reference.
Gamma levels Free TrialDaily Gamma Levels
Sponsored by MONETA MARKETS CO.
Pinpoint key entry and exit points using levels derived directly from the options market.
The shared link provides a free trial for investors ready to upgrade their trading with premium, actionable data.
7Lots v27Lots strategy
The strategy is a counter-trend with a return to the moving average. Based on the DCA strategy, but greatly simplified to 7 lots (limit orders) and using the default martingale x2.5
Strategy description
Two moving averages are used. The first MA can be used as a filter for opening a position and also closing if the second MA is disabled. If both are enabled, then the position is closed by the second MA, and the first is used as a filter. There is also a separate take profit and if the price does not reach it, the position will be closed when returning to the MA, which will act as a stop loss, but the risk of liquidation is still present since the strategy does not have a regular classic stop loss.
Main parameters
TP & SL - selection of closing a position only by MA or take profit + MA. If only MA is selected, the strategy ignores the take profit value and always closes the position by MA.
MA settings
MA length from 1 to 200
Sliding type ALMA, SMA, EMA, VWMA, WMA, RMA
MA data - Open, High, Low, Close, HL2, HL3, OHLC4, OC2
MA shift in %. The MA shift is set in % above or below the current prices. For the First MA, this function allows you to use it as a filter for opening a position. For example, if you specify a shift much lower, for example -1% or -2%, then there will be less noise for opening a position, but this affects the number of transactions.
DCA group settings
Take profit %. Set the take profit as usual, but if the price does not reach the take profit, then the closing will occur by MA when the price returns to its values.
Take profit from. There is a choice of take profit from the average position, or by closing the previous bar. The latter increases the profit factor, but also increases the risk of liquidation if the strategy is used on perpetual contracts or futures.
Position Entry % - specifies the condition for opening a position. 0% - opening will occur immediately. 2% - opening will occur when the price falls 2% below the bar closing if the Long mode is set. If Short, then vice versa.
Grid Scale - classic progressive grid step
Next comes the setup of lots as a percentage of the deposit. Simply specify how many percent of each lot will be used from the total deposit. By default, a percentage for each lot is already allocated according to Martingale with a multiplier of x2.5, but you can calculate your own. You can specify 0, then the lot will be disabled.
Leverage. By default, 1.
Extra lot. This is the 7th lot that I decided to allocate separately from the main grid, since it is not always really needed. And it is calculated from the last lot of the grid. You can set it to how much lower percentage of the last lot to set it for and also what percentage of the deposit it will use. If you trade futures, then this lot, as an auxiliary one, can greatly average the position in case of strong volatility in the market.
Next, you can specify the start and end dates of transactions.
The table displays the total percentage of the deposit involved in trading at the moment. By default, all lots and leverage are set to 100% deposit load. The table also shows the number of transactions of the last 5-6 lots and extra, so that you can understand how many of them there were throughout the history of trading and possibly draw some conclusions for yourself. Especially useful for extra lots. Max Historical Drawdown (%) shows the historical price drop at the moment from the average open position. This will make it possible to analyze what leverage this strategy could withstand over the entire trading history. The date of this drop is also indicated.
For novice traders, it is recommended to use only on spot without the risk of liquidation. It is also best to use large time frames to see the whole picture, but you can also use a minute chart, there are no restrictions, everything is in your hands.
Tips. If you use minute charts, it is better to greatly increase the length of the MA from 20 and above. Hourly charts from 1-7. It is better to set up on spot and if you need futures, then use the same settings from spot, but with correction for futures. This strategy does not work well in Short, but shows excellent results for Long even when the market falls. When selecting settings, take into account sharp market fluctuations, Max Historical Drawdown (%) will show you this information in the table. You need to set up from the first MA, when you set up for the best result, then turn on the second MA and transfer the settings of the first MA to the second. Then fine-tune both MAs. The results can increase significantly, but this is not always the case. Sometimes just one MA is enough
The strategy is paid, tested with my own experience and money since 2022. Own development for opening a position.
Custom Time Range HighlightThis indicator highlights specific time ranges on your TradingView chart with customizable background colors and labels, making it easier to identify key trading sessions and ICT (Inner Circle Trader) Killzones. It is designed for traders who want to mark important market hours, such as major sessions (Asia, New York, London) or high-volatility Killzones, with full control over activation, timing, colors, and transparency.
Features
Customizable Time Ranges: Define up to 9 different time ranges, including one custom range, three major market sessions (Asia, New York, London), and five ICT Killzones (Asia, NY Open, NY Close, London Open, London Close).
Individual Activation: Enable or disable each time range independently via checkboxes in the settings. By default, only the ICT Killzones are active.
Custom Colors and Transparency: Set unique background and label colors for each range, with adjustable transparency for both.
Labeled Time Ranges: Each active range is marked with a customizable label at the start of the period, displayed above the chart for easy identification.
Priority Handling: If multiple ranges overlap, the range with the higher number (e.g., Asia Killzone over Custom Range) determines the background color.
CET Time Zone: Time ranges are based on Central European Time (CET, Europe/Vienna). Adjust the hours and minutes to match your trading needs.
Settings
The indicator settings are organized into three groups for clarity:
Custom Range: A flexible range (default: 15:30–18:00 CET) for user-defined periods.
Session - Asia, NY, London: Major market sessions (Asia: 01:00–10:00, New York: 14:00–23:00, London: 09:00–18:00 CET).
ICT Killzones - Asia, NY, London: High-volatility periods (NY Open: 13:00–16:00, NY Close: 20:00–23:00, London Open: 08:00–11:00, London Close: 16:00–18:00, Asia: 02:00–05:00 CET).
For each range, you can:
Toggle activation (default: only ICT Killzones enabled).
Adjust start and end times (hours and minutes).
Customize the label text.
Choose background and label colors with transparency levels (0–100).
How to Use
Add the indicator to your chart.
Open the settings to enable/disable specific ranges, adjust their times, or customize colors and labels.
The chart will highlight active time ranges with the selected background colors and display labels at the start of each range.
Use it to focus on key trading periods, such as ICT Killzones for high-probability setups or major sessions for market analysis.
Notes
Ensure your time ranges align with your trading instrument’s session times.
Overlapping ranges prioritize higher-numbered ranges (e.g., Asia Killzone overrides London Session).
Ideal for day traders, scalpers, or ICT strategy followers who need clear visual cues for specific market hours.
Feedback
If you have suggestions for improvements or need help with customization, feel free to leave a comment or contact the author!
ATR %Overview
Shows the Average True Range (ATR) as a percentage of a chosen price basis. Useful for a quick, apples-to-apples view of current volatility across symbols and timeframes. The value is displayed in a clean table at the bottom-right of the chart.
What it shows
Basis can be: Close, EMA(len), SMA(len), or VWAP.
Data timeframe can be the Chart timeframe or a Daily aggregation.
Inputs
ATR length (len) – ATR lookback.
Percent basis – Close / EMA / SMA / VWAP.
Data timeframe – Chart (uses the current chart TF) or Daily (computes ATR and basis from daily data).
Decimals – number of decimal places to display.
Text / Background / Frame colors – customize the table appearance.
Notes
In Daily mode, ATR and basis are taken from daily data and update on daily close.
VWAP is available only in Chart mode (Daily + VWAP will show n/a by design).
The script overlays the chart but does not plot lines—only a compact info box.
Use cases
Compare volatility across coins/stocks quickly using ATR% instead of raw ATR.
Switch basis to match your style (e.g., EMA for trend-aware scaling, VWAP for intraday context).
Set Daily to track higher-timeframe volatility while trading lower TFs.
Disclaimer
For educational purposes only. Not financial advice. Trading involves risk.
Gann Fan Strategy [KedarArc Quant]Description
A single-concept, rule-based strategy that trades around a programmatic Gann Fan.
It anchors to a swing (or a manual point), builds 1×1 and related fan lines numerically, and triggers entries when price interacts with the 1×1 (breakout or bounce). Management is done entirely with the fan structure (next/previous line) plus optional ATR trailing.
What TV indicators are used
* Pivots: `ta.pivothigh/ta.pivotlow` to confirm swing highs/lows for anchor selection.
* ATR: `ta.atr` only to scale the 1×1 slope (optional) and for an optional trailing stop.
* EMA: `ta.ema` as a trend filter (e.g., only long above the EMA, short below).
No RSI/MACD/Stoch/Heikin/etc. The logic is one coherent framework: Gann price–time geometry, with ATR as a scale and EMA as a risk filter.
How it works
1. Anchor
* Auto: chooses the most recent *confirmed* pivot (you control Left/Right).
* Manual: set a price and bar index and the fan will hold that point (no re-anchoring).
* Optional Re-anchor when a newer pivot confirms.
2. 1×1 Slope (numeric, not cosmetic)
* ATR mode: `1×1 = ATR(Length) × Multiplier` (adapts to volatility).
* Fixed mode: `ticks per bar` (constant slope).
Because slope is numeric, it doesn’t change with chart zoom, unlike the drawing tool.
3. Fan Lines
Builds classic ratios around the 1×1: 1/8, 1/4, 1/3, 1/2, 1/1, 2/1, 3/1, 4/1, 8/1.
4. Signals
* Breakout: cross of price over/under the 1×1 in the EMA-aligned direction.
* Bounce (optional): touch + reversal across the 1×1 to reduce whipsaw.
5. Exits & Risk
* Take-profit at the next fan line; Stop at the previous fan line.
* If a level is missing (right after re-anchor), a fallback Risk-Reward (RR) is used.
* Optional ATR trailing stop.
Why this is unique
* True numeric fan: The 1×1 slope is calculated from ATR or fixed ticks—not from screen geometry—so it is scale-invariant and reproducible across users/timeframes.
* Deterministic anchor logic: Uses confirmed pivots (with your L/R settings). No look-ahead; anchors update only when the right bars complete.
* Fan-native trade management: Both entries and exits come from the fan structure itself (with a minimal ATR/EMA assist), keeping the method pure.
* Two entry archetypes: Breakout for momentum days; Bounce for range days—switchable without changing the core model.
* Manual mode: Lock a session’s bias by anchoring to a chosen swing (e.g., day’s first major low/high) and keep the fan constant all day.
Inputs (quick guide)
* Auto Anchor (Left/Right): pivot sensitivity. Higher values = fewer, stronger anchors.
* Re-anchor: refresh to newer pivots as they confirm.
* Manual Anchor Price / Bar Index: fixes the fan (turn Auto off).
* Scale 1×1 by ATR: on = adaptive; off = use ticks per bar.
* ATR Length / ATR Multiplier: controls adaptive slope; start around 14 / 0.25–0.35.
* Ticks per bar: exact fixed slope (match a hand-drawn fan by computing slope ÷ mintick).
* EMA Trend Filter: e.g., 50–100; trades only in EMA direction.
* Use Bounce: require touch + reverse across 1×1 (helps in chop).
* TP/SL at fan lines; Fallback RR for missing levels; ATR Trailing Stop optional.
* Transparency/Plot EMA: visual preferences.
Tips
* Range days: larger pivots (L/R 8–12), Bounce ON, ATR Multiplier \~0.30–0.40, EMA 100.
* Trend days: L/R 5–6, Breakout, Multiplier \~0.20–0.30, EMA 50, ATR trail 1.0–1.5.
* Match the TV Gann Fan drawing: turn ATR scale OFF, set ticks per bar = `(Δprice between anchor and 1×1 target) / (bars) / mintick`.
Repainting & testing notes
* Pivots require Right bars to confirm; anchors are set after confirmation (no look-ahead).
* Signals use the current bar close with TradingView strategy mechanics; real-time vs. bar-close can differ slightly, as with any strategy.
* Re-anchoring legitimately moves the structure when new pivots confirm—by design.
⚠️ Disclaimer
This script is provided for educational purposes only.
Past performance does not guarantee future results.
Trading involves risk, and users should exercise caution and use proper risk management when applying this strategy.
Deadband Hysteresis Supertrend [BackQuant]Deadband Hysteresis Supertrend
A two-stage trend tool that first filters price with a deadband baseline, then runs a Supertrend around that baseline with optional flip hysteresis and ATR-based adverse exits.
What this is
A hybrid of two ideas:
Deadband Hysteresis Baseline that only advances when price pulls far enough from the baseline to matter. This suppresses micro noise and gives you a stable centerline.
Supertrend bands wrapped around that baseline instead of raw price. Flips are further gated by an extra margin so side changes are more deliberate.
The goal is fewer whipsaws in chop and clearer regime identification during trends.
How it works (high level)
Deadband step — compute a per-bar “deadband” size from one of four modes: ATR, Percent of price, Ticks, or Points. If price deviates from the baseline by more than this amount, move the baseline forward by a fraction of the excess. If not, hold the line.
Centered Supertrend — build upper and lower bands around the baseline using ATR and a user factor. Track the usual trailing logic that tightens a band while price moves in its favor.
Flip hysteresis — require price to exceed the active band by an extra flip offset × ATR before switching sides. This adds stickiness at the boundary.
Adverse exit — once a side is taken, trigger an exit if price moves against the entry by K × ATR .
If you would like to check out the filter by itself:
What it plots
DBHF baseline (optional) as a smooth centerline.
DBHF Supertrend as the active trailing band.
Candle coloring by trend side for quick read.
Signal markers 𝕃 and 𝕊 at flips plus ✖ on adverse exits.
Inputs that matter
Price Source — series being filtered. Close is typical. HL2 or HLC3 can be steadier.
Deadband mode — ATR, Percent, Ticks, or Points. This defines the “it’s big enough to matter” zone.
ATR Length / Mult (DBHF) — only used when mode = ATR. Larger values widen the do-nothing zone.
Percent / Ticks / Points — alternatives to ATR; pick what fits your market’s convention.
Enter Mult — scales the deadband you must clear before the baseline moves. Increase to filter more noise.
Response — fraction of the excess applied to baseline movement. Higher responds faster; lower is smoother.
Supertrend ATR Period & Factor — traditional band size controls; higher factor widens and flips less often.
Flip Offset ATR — extra ATR buffer required to flip. Useful in choppy regimes.
Adverse Stop K·ATR — per-trade danger brake that forces an exit if price moves K×ATR against entry.
UI — toggle baseline, supertrend, signals, and bar painting; choose long and short colors.
How to read it
Green regime — candles painted long and the Supertrend running below price. Pullbacks toward the baseline that fail to breach the opposite band often resume higher.
Red regime — candles painted short and the Supertrend running above price. Rallies that cannot reclaim the band may roll over.
Frequent side swaps — reduce sensitivity by increasing Enter Mult, using ATR mode, raising the Supertrend factor, or adding Flip Offset ATR.
Use cases
Bias filter — allow entries only in the direction of the current side. Use your preferred triggers inside that bias.
Trailing logic — treat the active band as a dynamic stop. If the side flips or an adverse K·ATR exit prints, reduce or close exposure.
Regime map — on higher timeframes, the combination baseline + band produces a clean up vs down template for allocation decisions.
Tuning guidance
Fast markets — ATR deadband, modest Enter Mult (0.8–1.2), response 0.2–0.35, Supertrend factor 1.7–2.2, small Flip Offset (0.2–0.5 ATR).
Choppy ranges — widen deadband or raise Enter Mult, lower response, and add more Flip Offset so flips require stronger evidence.
Slow trends — longer ATR periods and higher Supertrend factor to keep you on side longer; use a conservative adverse K.
Included alerts
DBHF ST Long — side flips to long.
DBHF ST Short — side flips to short.
Adverse Exit Long / Short — K·ATR stop triggers against the current side.
Strengths
Deadbanded baseline reduces micro whipsaws before Supertrend logic even begins.
Flip hysteresis adds a second layer of confirmation at the boundary.
Optional adverse ATR stop provides a uniform risk cut across assets and regimes.
Clear visuals and minimal parameters to adjust for symbol behavior.
Putting it together
Think of this tool as two decisions layered into one view. The deadband baseline answers “does this move even count,” then the Supertrend wrapped around that baseline answers “if it counts, which side should I be on and where do I flip.” When both parts agree you tend to stay on the correct side of a trend for longer, and when they disagree you get an early warning that conditions are changing.
When the baseline bends and price cannot reclaim the opposite band , momentum is usually continuing. Pullbacks into the baseline that stall before the far band often resolve in trend.
When the baseline flattens and the bands compress , expect indecision. Use the Flip Offset ATR to avoid reacting to the first feint. Wait for a clean band breach with follow through.
When an adverse K·ATR exit prints while the side has not flipped , treat it as a risk event rather than a full regime change. Many users cut size, re-enter only if the side reasserts, and let the next flip confirm a new trend.
Final thoughts
Deadband Hysteresis Supertrend is best read as a regime lens. The baseline defines your tolerance for noise, the bands define your trailing structure, and the flip offset plus adverse ATR stop define how forgiving or strict you want to be at the boundary. On strong trends it helps you hold through shallow shakeouts. In choppy conditions it encourages patience until price does something meaningful. Start with settings that reflect the cadence of your market, observe how often flips occur, then nudge the deadband and flip offset until the tool spends most of its time describing the move you care about rather than the noise in between.
ATR Position Size Calc+Stop guessing your position size. This indicator automatically calculates the optimal number of contracts or shares for each trade.
It is designed for one purpose: to help you maintain consistent risk management by adjusting your trade size based on current market volatility (ATR) and your fixed monetary risk.
// KEY FEATURES
Consistent Risk : Set your max risk in dollars (e.g., $300), and the script calculates the exact position size to match it.
Volatility-Based Stops : Uses the ATR to define a logical stop loss that adapts to market conditions.
Stable Calculation : The calculation is based on the previous closed candle, so the value is reliable and doesn't change intra-bar.
// HOW TO USE
In the settings, simply define your max risk per trade ($) and your ATR parameters. The indicator does the rest.
The essential tool for disciplined trading.
Dusk Nexus Alpha 4HDusk Nexus Alpha 4H (After Dark Main)
개요
기반 기술: 시장 에너지 폭발 감지 시스템
최적 시간대: 4시간봉 전용
신호 특성: 극희귀, 고품질
용도: 큰 움직임 초기 포착
테이블 설명
DUSK NEXUS ALPHA 4H | 4H LOCKED
├─ Timeframe: 4H 시간대 확인
├─ VOLATILITY: 변동성 폭발 상태 (Critical/High/Normal)
├─ FLOW: 거래량 급증 상태 (Surge/High/Normal)
├─ MOVEMENT: 가격 변화 크기 (Major/Minor)
├─ DIRECTION: 강한 방향성 확인 (Strong Up/Down/Weak)
├─ RANGE: 가격 범위 비율 (Wide/Narrow)
├─ UP POWER: 상승 연속성 강도 (숫자/최대값)
└─ STATUS: 최종 넥서스 신호 상태
핵심 개념
시장 내 잠재 에너지가 폭발적으로 방출되는 순간 포착
변동성, 거래량, 가격 움직임의 동시 급증 패턴 분석
연속성 확인을 통해 일시적 노이즈와 진짜 신호 구분
Dusk Nexus Alpha 4H (After Dark Main)
Overview
Core Technology: Market energy explosion detection system
Optimal Timeframe: 4-hour charts exclusively
Signal Characteristics: Extremely rare, high quality
Purpose: Early capture of major movements
Dashboard Explanation
DUSK NEXUS ALPHA 4H | 4H LOCKED
├─ Timeframe: 4H timeframe verification
├─ VOLATILITY: Volatility explosion status (Critical/High/Normal)
├─ FLOW: Volume surge status (Surge/High/Normal)
├─ MOVEMENT: Price change magnitude (Major/Minor)
├─ DIRECTION: Strong directional confirmation (Strong Up/Down/Weak)
├─ RANGE: Price range ratio (Wide/Narrow)
├─ UP POWER: Upward continuity strength (number/maximum value)
└─ STATUS: Final nexus signal status
Core Concept
Capturing moments when latent market energy explosively releases
Analysis of simultaneous surge patterns in volatility, volume, and price movement
Distinguishing between temporary noise and genuine signals through continuity verification
Dusk Core Alpha 1HDusk Core Alpha 1H
개요
기반 기술: 동적 가격 밴드 돌파 시스템
최적 시간대: 1시간봉 전용
신호 특성: 단기 반응, 적당한 빈도
용도: 단기 스캘핑, 데이트레이딩
테이블 설명
DUSK CORE ALPHA 1H | 1H LOCKED
├─ Timeframe: 1H 시간대 확인
├─ LOCATION: 동적 밴드 내부/외부 위치
├─ BOUNDARY: 밴드 경계선 돌파 상태
├─ ACTIVITY: 변동성 부스트 확인 (배수)
└─ STATUS: 최종 코어 신호 상태
핵심 개념
시장 변동성에 따라 자동 조절되는 가격 경계선
경계선 돌파 시 추세 전환 가능성 감지
단기 시간대 특화로 빠른 반응성 확보
Dusk Core Alpha 1H (After Dark Main)
Overview
Core Technology: Dynamic price band breakout system
Optimal Timeframe: 1-hour charts exclusively
Signal Characteristics: Short-term response, moderate frequency
Purpose: Short-term scalping, day trading
Dashboard Explanation
DUSK CORE ALPHA 1H | 1H LOCKED
├─ Timeframe: 1H timeframe verification
├─ LOCATION: Position inside/outside dynamic bands
├─ BOUNDARY: Band boundary breakout status
├─ ACTIVITY: Volatility boost confirmation (multiplier)
└─ STATUS: Final core signal status
Core Concept
Price boundaries that auto-adjust according to market volatility
Detection of potential trend reversal upon boundary breakouts
Fast responsiveness specialized for short-term timeframes
Dusk Flux Alpha 4HDusk Flux Alpha 4H (After Dark Main)
개요
기반 기술: 기관 투자자 매매선 추적 시스템
최적 시간대: 4시간봉 전용
신호 특성: 높은 정확도, 적은 빈도
용도: 중장기 스윙 트레이딩
테이블 설명
DUSK FLUX ALPHA 4H | 4H LOCKED
├─ Timeframe: 4H 시간대 확인 (다른 시간대 사용금지)
├─ LOCATION: 현재가의 기관 매매선 대비 위치
├─ RANGE: 기관선으로부터 이탈 정도 (%)
├─ ACTIVITY: 시장 변동성 활성화 상태 (배수)
├─ FLOW: 거래량 급증 확인 (평균 대비 배수)
├─ FORCE: 가격 방향성 모멘텀 (양/음/중립)
└─ STATUS: 최종 플럭스 신호 발생 여부
핵심 개념
대형 기관들의 집단 매매 패턴을 실시간 추적
기관선 이탈 시점에서 개인 투자자 진입 기회 포착
변동성과 거래량 동반 확인으로 신호 정확도 향상
Dusk Flux Alpha 4H (After Dark Main)
Overview
Core Technology: Institutional investor flow tracking system
Optimal Timeframe: 4-hour charts exclusively
Signal Characteristics: High accuracy, low frequency
Purpose: Medium to long-term swing trading
Dashboard Explanation
DUSK FLUX ALPHA 4H | 4H LOCKED
├─ Timeframe: 4H timeframe verification (other timeframes prohibited)
├─ LOCATION: Current price position relative to institutional flow lines
├─ RANGE: Deviation percentage from institutional levels (%)
├─ ACTIVITY: Market volatility activation status (multiplier)
├─ FLOW: Volume surge confirmation (average ratio multiplier)
├─ FORCE: Price directional momentum (positive/negative/neutral)
└─ STATUS: Final flux signal generation status
Core Concept
Real-time tracking of large institutional collective trading patterns
Capturing retail entry opportunities at institutional flow deviation points
Enhanced signal accuracy through combined volatility and volume confirmation
Advanced Crypto Day Trading - Bybit Optimized mapercivEMA RSI ATR MACD trading script strategy with filters for weekdays
NN Crypto Scalping ULTIMATE v6 - MTF mapercivNeural Network Crypto Trading System v6.1
Complete Technical Documentation
Author
: Neural Network Ensemble Trading System
Version
: 6.1 - MTF Corrected & Bias Fixed
Date
: January 2025
Platform
: TradingView PineScript v6
Executive Summary
The
Neural Network Crypto Trading System v6.1
is an advanced algorithmic trading system that combines three specialized neural networks into an intelligent ensemble to generate cryptocurrency trading signals. The system integrates multi-timeframe analysis, crypto-specific optimizations, dynamic risk management, and continuous learning to maximize performance in highly volatile markets.
Key Features:
Ensemble of 3 specialized Neural Networks
(Primary, Momentum, Volatility)
Multi-Timeframe Analysis
with 5 timeframes (5m, 15m, 1h, 4h, 1D)
22 Advanced Features
for each model
Anti-repainting
guaranteed with confirmed data
8 Market Regime
automatic detections
6 Signal Levels
(Strong/Moderate/Weak Buy/Sell)
Professional dashboard
with 15+ real-time metrics
Intelligent alert system
with webhook integration
Aladin 2.1Aladin 2.1 is a refined indicator created to improve clarity in trading decisions by combining structural market analysis with advanced signal management. It is designed to minimize noise, avoid over-trading, and provide traders with disciplined setups across multiple asset classes.
One of the unique strengths of this tool is the Minimum Bars Between Signals. This ensures that once a trade setup occurs, the system won’t instantly fire multiple signals back-to-back. Instead, it introduces a controlled spacing mechanism that helps traders avoid unnecessary whipsaws and focus only on meaningful moves.
Another key element is the Valid Bars After Setup. When a potential opportunity is detected, the confirmation window lasts for a specified number of bars (e.g., 1, 2, or 3). This gives traders flexibility in how they respond to signals , whether they want stricter entries that trigger immediately, or a slightly wider confirmation window that allows for more breathing room.
Market Suitability
Works exceptionally well in ranging markets, whether it’s intraday scalping, short-term setups, or swing trading.
Designed for Forex and Crypto markets but equally adaptable to stocks and indices.
Best used when the market is sideways or balanced.
Note: During strong one-directional trends, counter-trend signals may appear less reliable ,the tool is primarily optimized for range and structured phases.
Key Benefits:
Clear Buy/Sell signals with controlled spacing
Adjustable confirmation window (valid bars)
Helps avoid over-trading and false triggers
Adaptable for scalpers, intraday traders, and swing traders alike
Pro Note: This indicator doesn’t rely on a single calculation method, it integrates multiple layers of logic into one framework, keeping it robust without being overly complicated for the user.
Volume Pulse Indicator by Quantx TeamVolume Pulse by Quantx Team – A smart volume-tracking indicator that highlights market participation, detects unusual spikes, and reveals momentum strength through volume dynamics. Perfect for spotting high-activity zones and dry-up conditions
Chhatrapati Indicator by TradeNitiX ⚔️ Chhatrapati Indicator by TradeNitiX
A precision-driven trading system built to capture strong trends and avoid market noise. It blends range filtering, momentum checks, and volatility-based risk control for clean, confident entries and exits.
🔍 Core Strategy Components
1. Range Filter – Trend Detection
2. RSI – Momentum Confirmation
3. ADX – Trend Strength Filter
4. ATR – Volatility-Based Risk Management
💎 Highlights – Chhatrapati Indicator
✔ Display Profit/Loss values above each candle
✅ Clear Buy/Sell Signals – No guesswork, just precision entries and exits
📊 High Accuracy – Filters out false signals using multi-layer confirmation
⚡ Beginner-Friendly – Simple logic, powerful results for all skill levels
🔥 Multi-Market Compatibility – Works seamlessly on Forex, crypto, indices, stocks
🎯 Volatility-Based Risk Control – ATR-driven SL/TP for realistic, dynamic targets
🧠 Smart Trend Detection – Combines range filtering with ADX for strong setups
💡 Live Trade Demos – Real-time examples to build trader confidence
📈 Momentum + Strength Filters – RSI + ADX combo avoids weak or choppy trades
🛡️ Risk-Reward Focused – Built-in 3:1 RR logic for disciplined growth
🚀 Tested & Trusted – Proven results across multiple market conditions
⚙️ Key Advantages of Chhatrapati Indicator
✅ Noise-Free Trend Detection – Filters weak moves, locks onto strong trends
📊 RSI + ADX Confirmation – Only trades with real momentum and strength
🎯 ATR-Based Risk Control – Smart SL/TP placement, adapts to volatility
⏱️ Multi-Timeframe Ready – Works for scalping, swing, and intraday setups
👁️ Visual Clarity – Clean signals, SL/TP zones, and trend markers
🎯 Ideal Users
✔ Trend Followers – Ride strong moves with confidence
✔ Swing Traders – Target medium-term setups with solid RR
✔ Scalpers – Quick, precise entries with minimal noise
✔ Algo Traders – Use alerts for automated execution
Chhatrapati (TradeNitiX)⚔️ Chhatrapati Indicator by TradeNitiX
A precision-driven trading system built to capture strong trends and avoid market noise. It blends range filtering, momentum checks, and volatility-based risk control for clean, confident entries and exits.
🔍 Core Strategy Components
1. Range Filter – Trend Detection
2. RSI – Momentum Confirmation
3. ADX – Trend Strength Filter
4. ATR – Volatility-Based Risk Management
💎 Highlights – Chhatrapati Indicator
✅ Clear Buy/Sell Signals – No guesswork, just precision entries and exits
📊 High Accuracy – Filters out false signals using multi-layer confirmation
⚡ Beginner-Friendly – Simple logic, powerful results for all skill levels
🔥 Multi-Market Compatibility – Works seamlessly on Forex, crypto, indices, stocks
🎯 Volatility-Based Risk Control – ATR-driven SL/TP for realistic, dynamic targets
🧠 Smart Trend Detection – Combines range filtering with ADX for strong setups
💡 Live Trade Demos – Real-time examples to build trader confidence
📈 Momentum + Strength Filters – RSI + ADX combo avoids weak or choppy trades
🛡️ Risk-Reward Focused – Built-in 3:1 RR logic for disciplined growth
🚀 Tested & Trusted – Proven results across multiple market conditions
⚙️ Key Advantages of Chhatrapati Strategy
✅ Noise-Free Trend Detection – Filters weak moves, locks onto strong trends
📊 RSI + ADX Confirmation – Only trades with real momentum and strength
🎯 ATR-Based Risk Control – Smart SL/TP placement, adapts to volatility
⏱️ Multi-Timeframe Ready – Works for scalping, swing, and intraday setups
👁️ Visual Clarity – Clean signals, SL/TP zones, and trend markers
🎯 Ideal Users
✔ Trend Followers – Ride strong moves with confidence
✔ Swing Traders – Target medium-term setups with solid RR
✔ Scalpers – Quick, precise entries with minimal noise
✔ Algo Traders – Use alerts for automated execution
