Midnight Open Retracement [LuxAlgo]The Midnight Open Retracement indicator highlights the 12:00 AM ET opening price and provides real-time probability statistics for price retracing to this level during the New York session.
Designed specifically with NQ (Nasdaq 100) futures data in mind, the tool helps traders identify high-probability "magnet" levels for New York open scalps based on historical performance.
🔶 USAGE
The Midnight Open is a cornerstone of ICT concepts, acting as a "true" daily open that often serves as a point of institutional re-accumulation or distribution. This script automates the identification of this level and provides a dashboard to help traders decide when to expect a retracement.
🔹 Identifying the Bias
The script compares the New York opening price (9:30 AM ET) to the Midnight opening price:
If NY opens above the Midnight Open, the indicator identifies a potential bearish retracement bias toward the level. If NY opens below the Midnight Open, the indicator identifies a potential bullish retracement bias toward the level.
🔹 Using as a Profit Target
Because the Midnight Open is retraced to frequently, it serves as an ideal Take Profit (TP) target for opening range scalps. The indicator marks the exact moment a retracement occurs with a visual marker, confirming the level has been tested.
🔶 DETAILS
The statistics integrated into this tool are based on extensive backtesting of NQ futures over 6-month periods. Understanding these probabilities allows traders to filter out low-conviction setups and focus on high-probability days.
🔹 The Core Probabilities
When price opens above the midnight level, it retraces to touch it 74% of the time. When price opens below the midnight level, it retraces to touch it 63% of the time.
🔹 Weekday Variance
Not all trading days are equal. The script accounts for "By Weekday" statistics:
High Probability (Wednesdays): On Wednesdays, retracement probabilities can jump as high as 89% for opens above the midnight level. Low Probability (Mondays): Mondays often exhibit "Avoid" criteria, with retracement probabilities frequently falling below 60%.
The dashboard dynamically updates the "Probability of Retracement" based on the current day of the week, helping you stay aligned with historical data.
🔶 SETTINGS
🔹 Session Settings
Timezone Mode: Choose between Exchange time or "America/New_York" (recommended for ICT concepts). Midnight Open Time: The specific time used to set the daily baseline. NY Open Time: The time used to determine the session opening bias. NY Session Range: Defines the boundary for the New York session box.
🔹 Visual Settings
Show Midnight Level: Toggles the horizontal line representing the midnight price. Show Retrace Circle: Displays markers on the chart when the retracement goal is met. Show NY Session Box: Draws a dynamic box for the NY session that changes color based on the current price relative to the open.
🔹 Dashboard Settings
Show Insights Report: Toggles the statistics dashboard on the chart. Position/Size: Controls the UI placement and scale of the data table.
圖表形態
Supertrend Breakout Boxes• ⭐ Built using original Supertrend logic to detect tradable breakouts.
• ⚙️ SuperTrend Breakout Pine v6 — built for XAUUSD precision, and equally lethal on Forex + Crypto.
• 📦 Shift Zones boxed consolidation after reversals = clean, tradable structure no noise.
• 📈 BUY STOP ▲ auto-plotted above bullish zones for breakout entries — no guesswork, just levels.
• 📉 SELL STOP ▼ auto-plotted below bearish zones for breakdown plays — instant clarity.
• 🧠 Adaptive spacing uses zone range % so stops scale with volatility perfect for Gold’s swings.
• 🧭 Projection lines extend forward so you can plan the trade before price arrives.
• 🟩🟪 Dual color system + BULL/BEAR labels = zero interpretation lag when trend flips.
• 🧼 Box-only display keeps charts clean: zones + stops = actionable, minimal, fast decisions.
• ⭐ Apply to your M30/H1/H4 TradingView chart — your breakout roadmap for Gold, FX, Crypto.
• 🚀 Make it your default overlay: spot consolidation → place stops → ride the expansion move.
• 📦 Enable/Disable BUY/SELL breakouts. For Gold you can use BUY only breakouts.
• 📦 Too many boxes on chart? Increase your ART multiplier from settings.
• ⭐ How to trade this? Enter in the direction of breakout.
NQ M30
GBPUSD M30
BTCUSD H1
UKOIL H1
BTC Liquidation Heatmap | Multi-ExchangeBTC Liquidation Heatmap | Multi-Exchange
🔍 This heatmap pulls volume data from Binance, Coinbase, and Bitstamp simultaneously to show you where the real liquidation clusters are sitting. Instead of guessing where stops might get hit, you get actual volume-weighted zones with a strength score that tells you which levels matter.
The zones change color based on how much volume is stacked at each level. Bright colors mean heavy liquidation potential, faded colors mean weak spots. Each label shows the volume size, a strength rating out of 10, and how far away it is from current price in percentage terms.
Works best on 4H/D1 timeframes for Bitcoin. The default settings are tuned for day trading but you can dial them up or down depending on your style.
⚙️Drop it on your BTCUSD chart and you'll see colored boxes above and below price. Purple zones are short liquidations (above price), teal zones are long liquidations (below price). The thermometer on the right shows you the intensity scale.
Labels show three things: volume amount, strength ranking, and distance from current price. A level showing "1.45B ||| Strength 8/10 ||| 2.34%" means there's 1.45 billion in volume weight, it's an 8 out of 10 in terms of strength, and it's 2.34% away from where you are now.
The strength ranking is calculated using a proprietary algorithm that weighs multiple factors. Higher numbers mean more likely to cause a reaction when price gets there.
Settings You Actually Need to Know
📊 Lookback Bars: How far back to scan for levels. Default is 1000 bars which gives you plenty of context without cluttering the chart.
Pivot Width: Higher numbers = fewer but stronger levels. Start with 5, bump it to 8-10 if you're getting too much noise.
Min Level Weight: Filter out weak levels by raising this number. If your chart looks messy, start increasing it by 100M increments until it cleans up.
Label Size: Set to Normal by default. Switch to Large if you're on a big monitor or Small if you want a cleaner look.
How to Use It
🎯 Look for clusters of high-strength levels (8-10 rating) near current price. Those are your magnets. Price tends to get pulled toward them because that's where the liquidity is sitting. When you see a 10/10 level a few percent away, that's your target or your invalidation point depending on which side you're trading.
If price breaks through a strong level with momentum, it usually means the liquidations got triggered and you're looking at a real move. Weak levels (1-4 rating) are more likely to get ignored.
The distance percentage helps you figure out if a level is even worth watching. A 10/10 level that's 15% away might not matter for your intraday trade, but a 6/10 level that's only 0.5% away definitely does.
Exchange Toggles
🔄 You can turn off any of the three exchanges if you want. All three are on by default because more data = better picture. But if you only care about Binance and Coinbase, just uncheck Bitstamp in the settings. The volume recalculates automatically.
What to Ignore
Don't trade every level you see. Focus on the ones with 6/10 strength or higher that are within 5% of current price. Everything else is just context. And if a level gets hit (price crosses through it), it'll fade out so you know it's done.
The thermometer on the right is just a reference. You don't need to stare at it, but it helps when you're trying to figure out if a level is relatively strong or weak compared to everything else on screen.
Predator UAV🛩️ Predator UAV — Indicator Overview
Predator UAV is a multi-module market structure & execution assistant.
Think of it as 4 sensors on a drone, each scanning a different layer of price:
Module What it Sees Why it Matters
Module 1 Swing Structure (ZigZag) Trend direction & key levels
Module 2 FVGs, Imbalances, Targets, D/W/M levels Liquidity & objectives
Module 3 Swing Labels + Candle Patterns Entry timing & confirmation
Module 4 VWAP + Slope Dashboard Intraday bias & strength
You can turn any module ON/OFF independently.
🧩 MODULE 1 — ZigZag Swing High / Low (Market Structure)
What it does
Detects Swing Highs (HH / LH) and Swing Lows (HL / LL)
Draws:
Horizontal structure levels
ZigZag connections
Broken vs respected levels
Shows current swing direction in a mini table
How to use it
Bullish structure → higher lows forming
Bearish structure → lower highs forming
Best used for:
Bias filtering
Stop placement
Avoiding counter-trend trades
💡 Pro tip:
If price breaks a swing level and holds → structure shift confirmed.
🧱 MODULE 2 — FVGs, Imbalances, Targets & HTF Levels (Liquidity Engine)
This is the core execution intelligence.
A️⃣ Fair Value Gaps (FVGs)
Bullish FVG → price inefficiency below price
Bearish FVG → inefficiency above price
Options:
Extend none / limited / default
Limit number on chart
Show midpoint equilibrium
Usage
Price returning into FVG = high-probability reaction zone
Best entries = FVG + structure + VWAP bias
B️⃣ Imbalances
Based on strong displacement candles
Shows where price moved too fast
Usage
Often aligns with:
Breakouts
Stop runs
Momentum continuation
C️⃣ Swing Targets
Automatically marks next logical target
Swing Highs for longs
Swing Lows for shorts
Usage
Use as:
Take-profit zones
Partial exits
Trail stop reference
D️⃣ Previous Day / Week / Month Highs & Lows
Institutional liquidity magnets
Extremely effective on indices & forex
Usage
Expect:
Rejections
Stop hunts
Reversals near these levels
🔍 MODULE 3 — Swing Labels + Candle Patterns (Entry Timing)
This module answers: WHEN to enter?
Swing Labels
HH / HL / LH / LL printed directly on chart
Candle Patterns Detected
Hammer
Inverted Hammer
Bullish Engulfing
Bearish Engulfing
Hanging Man
Shooting Star
Each label includes:
Pattern name
Tooltip explanation (educational)
Usage
Never trade patterns alone
Best when combined with:
FVG
VWAP
Structure level
📐 MODULE 4 — VWAP with Slope Dashboard (Bias & Strength)
This is your intraday compass.
What it shows
Session VWAP
VWAP slope (numeric + angle)
Direction:
↗ Bullish
↘ Bearish
→ Neutral
Strength:
Weak
Moderate
Strong
How to read it
Above VWAP + positive slope → long bias
Below VWAP + negative slope → short bias
Flat slope → scalp only or wait
💡 Pro tip:
Strong VWAP slope + FVG pullback = A-grade setup.
🎯 COMPLETE TRADING TUTORIAL (Step-by-Step)
Step 1 — Determine Bias
Use Module 1 + Module 4
Structure bullish?
VWAP slope bullish?
✅ If aligned → look for longs
❌ If mixed → reduce size or wait
Step 2 — Identify POI (Point of Interest)
Use Module 2
Bullish:
Bullish FVG
Prior swing low
VWAP pullback
Bearish:
Bearish FVG
Prior swing high
VWAP rejection
Step 3 — Wait for Entry Confirmation
Use Module 3
Look for:
Engulfing
Hammer / Shooting star
Swing HL / LH confirmation
Step 4 — Define Targets
Use Next Target
Or Previous Day / Week Highs
Partial TP near first liquidity pool
Step 5 — Risk Management
SL beyond:
FVG boundary
Swing high/low
Trail using:
VWAP
Structure breaks
🧠 Best Timeframes
Purpose TF
Bias 15m / 30m
Setup 5m
Entry 1m–3m
Scalping VWAP + FVG only
⚠️ Common Mistakes to Avoid
❌ Trading every FVG
❌ Ignoring VWAP slope
❌ Counter-trend without confirmation
❌ Overloading chart (turn unused modules off)
🚀 Final Thought
Predator UAV is not a signal generator.
It’s a decision-support system — when multiple modules align, probability shifts in your favor.
Ultra Scalper Pro | ZLSMA + Chandelier Exit# Ultra Scalper Pro | ZLSMA + Chandelier Exit
## 📌 Overview
**Ultra Scalper Pro** is an all-in-one scalping indicator that combines the power of **Zero Lag LSMA (ZLSMA)** and **Chandelier Exit** with multiple confirmation filters. Designed for traders who want precise entry signals with clear TP/SL levels, this indicator works on any asset and any timeframe—though it shines brightest on lower timeframes (1m-15m) for scalping.
---
## 🎯 Key Features
### 🔹 Core Indicators
| Indicator | Purpose |
|-----------|---------|
| **ZLSMA (Zero Lag LSMA)** | Minimizes lag in trend detection using double-smoothed Least Squares Moving Average |
| **Chandelier Exit** | Dynamic ATR-based trailing stop that identifies trend reversals |
### 🔹 Confirmation Filters (All Toggleable)
- **RSI Filter** — Avoid overbought/oversold entries
- **Volume Filter** — Ensure sufficient market participation
- **EMA Crossover** — Confirm short-term trend direction
- **SuperTrend** — Additional trend confirmation
- **MACD** — Momentum validation
- **Stochastic** — Short-term momentum filter
- **Session Filter** — Trade only during preferred market sessions (Asia/Europe/US)
### 🔹 TP/SL System
Choose from **4 different modes**:
1. **ATR Based** — Dynamic levels based on market volatility
2. **Fixed %** — Set your own percentage targets
3. **R:R Ratio** — Risk-to-reward based targets
4. **Chandelier Based** — Use Chandelier Exit levels for SL
Each mode provides **3 Take Profit levels (TP1, TP2, TP3)** and a **Stop Loss** level, all visualized directly on your chart.
---
## 📊 How It Works
### Entry Logic
The indicator generates a **LONG signal** when:
- Price crosses above ZLSMA (or is above ZLSMA)
- Chandelier Exit flips to bullish (or is already bullish)
- All enabled confirmation filters align bullish
The indicator generates a **SHORT signal** when:
- Price crosses below ZLSMA (or is below ZLSMA)
- Chandelier Exit flips to bearish (or is already bearish)
- All enabled confirmation filters align bearish
### Signal Strength
- **Strong Signal** (Large Triangle) — Both ZLSMA crossover AND Chandelier Exit flip occur simultaneously with high volume
- **Normal Signal** (Small Triangle) — Standard entry conditions met
---
## ⚙️ Settings Guide
### General Settings
| Setting | Description |
|---------|-------------|
| Show Entry Signals | Display buy/sell triangles on chart |
| Show Labels | Display TP/SL price labels |
| Show Background Color | Highlight chart background based on position/trend |
| Enable Long/Short Signals | Toggle which direction to trade |
### ZLSMA Settings
| Setting | Default | Description |
|---------|---------|-------------|
| ZLSMA Length | 32 | Lookback period (lower = more responsive, higher = smoother) |
| ZLSMA Offset | 0 | Shift the line left/right |
### Chandelier Exit Settings
| Setting | Default | Description |
|---------|---------|-------------|
| ATR Period | 22 | Period for ATR calculation |
| ATR Multiplier | 3.0 | Distance from high/low (higher = wider stops) |
### Filter Settings
Each filter can be **enabled/disabled** independently. When disabled, that filter is ignored in the entry logic.
**Recommended for Scalping (5m):**
- ✅ ZLSMA: ON (Length: 32)
- ✅ Chandelier Exit: ON (ATR: 22, Mult: 3.0)
- ✅ RSI: ON (Period: 14)
- ✅ Volume: ON (Period: 20)
- ✅ EMA: ON (Fast: 9, Slow: 21)
- ⬜ SuperTrend: OFF (optional)
- ⬜ MACD: OFF (optional)
- ⬜ Stochastic: OFF (optional)
### TP/SL Settings
| Mode | Best For |
|------|----------|
| ATR Based | Volatile markets, adapts to conditions |
| Fixed % | Consistent risk management |
| R:R Ratio | Traders focused on risk-reward |
| Chandelier Based | Trend-following strategies |
---
## 📈 How to Use
### Step 1: Add to Chart
Add the indicator to your chart. It works on any symbol (Crypto, Forex, Stocks, Futures).
### Step 2: Configure Filters
Enable/disable filters based on your trading style:
- **Conservative**: Enable all filters for fewer but higher-quality signals
- **Aggressive**: Use only ZLSMA + Chandelier for more frequent signals
### Step 3: Set TP/SL Mode
Choose your preferred TP/SL calculation method based on your risk management style.
### Step 4: Watch for Signals
- 🟢 **Green Triangle (Below Bar)** = Long Entry
- 🔴 **Red Triangle (Above Bar)** = Short Entry
- Larger triangles = Stronger signals
### Step 5: Manage Your Trade
- Use the displayed TP1, TP2, TP3 levels for partial profit-taking
- Use the SL level for your stop loss
- Monitor the Info Table for real-time status
---
## 📋 Info Table Explained
The indicator displays a real-time information table showing:
| Field | Description |
|-------|-------------|
| ZLSMA | Current ZLSMA trend direction |
| Chandelier | Current Chandelier Exit direction |
| RSI | Current RSI value and status |
| Volume | Whether volume is above/below average |
| EMA Cross | Fast EMA vs Slow EMA relationship |
| SuperTrend | Current SuperTrend direction |
| MACD | MACD line vs Signal line |
| Stochastic | Stochastic K vs D relationship |
| ATR | Current ATR value |
| Position | Current tracked position (if any) |
| Entry | Entry price of current position |
| P&L | Unrealized profit/loss percentage |
---
## 🔔 Alerts
The indicator includes pre-configured alerts:
| Alert | Trigger |
|-------|---------|
| Long Signal | Any long entry signal |
| Short Signal | Any short entry signal |
| Strong Long | High-confidence long signal |
| Strong Short | High-confidence short signal |
| CE Buy Signal | Chandelier Exit flips bullish |
| CE Sell Signal | Chandelier Exit flips bearish |
| ZLSMA Bullish Cross | Price crosses above ZLSMA |
| ZLSMA Bearish Cross | Price crosses below ZLSMA |
| Any Entry Signal | Either long or short signal |
| Any Strong Signal | Either strong long or short |
**To set up alerts:**
1. Right-click on the chart
2. Select "Add Alert"
3. Choose "Ultra Scalper Pro" as the condition
4. Select your preferred alert type
---
## 💡 Tips for Best Results
### Timeframe Recommendations
| Timeframe | Style | Suggested Settings |
|-----------|-------|-------------------|
| 1m - 5m | Aggressive Scalping | ZLSMA: 20-32, CE ATR: 14-22 |
| 15m - 1H | Moderate Scalping | ZLSMA: 32-50, CE ATR: 22-30 |
| 4H - 1D | Swing Trading | ZLSMA: 50-100, CE ATR: 30-50 |
### Filter Combinations
- **High Win Rate**: Enable RSI + Volume + EMA filters
- **More Signals**: Disable RSI and Stochastic filters
- **Trend Following**: Enable SuperTrend + MACD filters
### Risk Management
- Always use the SL level provided
- Consider taking partial profits at TP1 and TP2
- Let remaining position run to TP3 or use trailing stop
---
## ⚠️ Disclaimer
This indicator is a tool to assist your trading decisions, not a guarantee of profits. Always:
- Use proper risk management
- Never risk more than you can afford to lose
- Backtest on your preferred asset before live trading
- Combine with your own analysis
Past performance does not guarantee future results. Trading involves substantial risk of loss.
---
## 📝 Changelog
**v1.0** (Initial Release)
- ZLSMA + Chandelier Exit core system
- 6 confirmation filters
- 4 TP/SL modes
- Real-time info table
- Session filter
- Comprehensive alert system
---
## 🙏 Credits
- ZLSMA concept based on Zero Lag Moving Average principles
- Chandelier Exit originally developed by Charles Le Beau
---
**If you find this indicator helpful, please leave a like and follow for future updates!**
*Happy Trading! 🚀*
All in One Trend Indicator by Nicks**Multi-Factor Confluence Suite (7-in-1 Overlay)**
### **Description:**
**Overview**
This script is a comprehensive workspace optimizer designed to combine 7 essential trading tools into a single, efficient overlay. By merging trend analysis, market structure, liquidity zones, and momentum signals, this tool allows traders to bypass the standard indicator limit and view high-probability confluence setups without a cluttered chart.
**Key Features & Functionality**
* **Trend Filtering (Hull Suite):**
* A lag-reduced moving average system that visualizes the macro trend.
* Includes candle coloring options to easily identify trend alignment.
* **Market Structure (SMC):**
* Automatically maps Break of Structure (BOS) and Change of Character (CHoCH).
* Identifies Order Blocks and Fair Value Gaps (FVG) for potential entry/exit zones.
* **Liquidity Analysis:**
* **Swings:** Highlights key swing highs and lows where stop losses typically reside.
* **Grabs:** Specifically detects "stop hunts" where price wicks liquidity before reversing (Bubbles visualization).
* **Momentum Signals (UT Bot & MACD):**
* **UT Bot:** Provides high-sensitivity Buy/Sell labels based on ATR trailing stops.
* **MACD Overlay:** Plots signal crossovers directly on the price chart (arrows) to identify momentum shifts without occupying a separate oscillator pane.
* **Session Timing:**
* Visualizes major trading sessions (NY, London, Tokyo, Sydney) with an optional dashboard table.
**How to Use**
This suite is designed for "Confluence Trading."
1. **Identify Trend:** Use the Hull Suite color to determine the directional bias.
2. **Find Structure:** Wait for price to react at an SMC Order Block or Liquidity Zone.
3. **Confirm Entry:** Look for a UT Bot label or MACD Arrow in the direction of the trend.
**Settings**
Each module is separated by headers in the settings menu. You can toggle specific indicators on/off to suit your trading style and keep the chart clean.
**Credits & Attribution**
This script is a compilation of open-source logic from the TradingView community, adapted and updated to Pine Script v5/v6 for compatibility. Special thanks to the original authors for their foundational work:
* *InSilico* (Hull Logic)
* *LuxAlgo* (SMC & Liquidity Swings Logic)
* *Flux Charts* (Liquidity Grabs Logic)
* *QuantNomad* (UT Bot Logic)
* *TraderHariKrishna* (Session Logic)
**License**
This source code is subject to the terms of the Mozilla Public License 2.0 and/or Creative Commons (CC BY-NC-SA 4.0) where applicable by the original authors. This script is intended for educational and personal use.
---
Trade Session Tracker [theUltimator5]Trade Session Tracker is a unique indicator designed to isolate each discrete trading session on the US stock exchanges and display a cumulative running price for each session so you can visualize how each session performs over long periods of time.
This indicator allows you to unlock a potentially unique and powerful trading strategy that exploits returns during lower liquidity periods through trend analysis. Certain stocks tend to move in the same direction during specific windows in the day, and now you can find them yourself.
This indicator only works properly on the daily timeframe. Other timeframes are not supported.
The sessions that this indicator supports are:
Intraday (Market open to market close)
After Hours (Market close until 20:00 eastern)
Overnight (20:00 eastern through 04:00 eastern the next day)
Pre-market (04:00 eastern through market open)
Close-to-open (market close to the following market open)
There are two plot modes:
Cumulative — chained returns since chart start (synthetic continuous price line)
Daily Change — single-session return (refreshes each new trading day)
!IMPORTANT!
This indicator only supports symbols that trade on the overnight markets through the BOATS ATS. This includes hundreds of ticker symbols, but the majority of smaller cap stocks or non-equity symbols are not supported.
Some symbols offer dividends, and the "ADJ" button at the bottom right corner of the chart must be disabled for the data to display properly, or else you will get extremely skewed results. Notorious symbols for this are SPY and AAPL.
How it works:
Standard chart data only calculates sessions through open, close, and previous close and cannot isolate out pre-market and after hours price action.
With the addition of overnight data, we now have a separate set of open and close values which can be pulled.
To calculate after hours price action, we use the opening price of the overnight venue divided by the close price earlier that day.
To calculate the pre-market price action, we divide the open price by the previous overnight close price.
Overnight price is simply calculated by overnight close divided by overnight open.
There is a table that can be toggled off and repositioned that shows the current settings.
Here is an example of close-to-open and intraday
Here is an example of overnight returns
Amd range by danAmd Range – Multi-Timeframe Volatility Breakout Scanner
Overview
Amd Range automatically detects price compression structures (Inside Bars) and alerts traders in real-time when price breaks out of the established range. The indicator monitors multiple timeframes simultaneously and can track up to 5 symbols from a single chart.
Core Methodology – What This Script Does
This indicator is based on the classic Inside Bar pattern — a volatility contraction setup where a candle's high and low are contained entirely within the previous candle's range.
Detection Logic:
Master Bar Identification: On each bar close, the script checks if the current candle qualifies as an Inside Bar:
Current High < Previous High
Current Low > Previous Low
When this condition is true, the previous candle becomes the "Master Bar", and its high/low levels define the active range.
Real-Time Breakout Detection: Once a range is established, the indicator monitors every tick (not just bar closes) for a breakout:
Bullish Breakout: Current price exceeds the Master Bar High → triggers BUY signal
Bearish Breakout: Current price drops below the Master Bar Low → triggers SELL signal
One-Shot Alert System: Each range produces exactly one alert. Once broken, the range is deactivated and no further alerts fire until a new Inside Bar forms and subsequently breaks.
Multi-Timeframe Scanning
The indicator uses request.security() to scan six higher timeframes simultaneously:
M30, H1, H2, H4, H8, H12
Each timeframe maintains independent state tracking, so a breakout on H4 does not affect H1 detection.
Dashboard Display
The built-in table displays real-time status for each symbol/timeframe combination:
RNG (Gray): Active range – volatility contraction in progress
BUY (Green): Bullish breakout detected
SELL (Red): Bearish breakout detected
- (Dark): No active pattern
How to Use
Add the indicator to any chart
Configure symbols in the "Extra Symbols" input group to monitor additional assets
Enable/disable timeframes in the "Timeframe Alerts" input group
Create a TradingView alert with the condition "Any alert() function call"
Trade the breakout — BUY signals indicate price has cleared resistance; SELL signals indicate price has broken support
Inputs
Show Range Lines: Toggle horizontal lines marking Master Bar high/low
Show BUY/SELL Labels: Toggle visual labels at breakout points
Show Dashboard Table: Toggle the multi-symbol status table
Range Line Color: Customize line color
Timeframe Toggles (M30–H12): Enable/disable alerts per timeframe
Symbol 1–4: Additional symbols to monitor
Important Notes
Alerts fire immediately on breakout (no waiting for candle close)
Only one alert per range – no repeat signals
Designed for forex, crypto, and futures markets
Works on all standard chart types
Pivots Double Top/Bottom - NancyPsTitsOriginal script taken and converted from HeWhoMustNotBeNamed excellent original script. converted from pine v4 to pine v6 and added alerts for LL, LH, HH, HL for any time frame
// Modified to include HH/HL/LH/LL alerts with timeframe selection
Daily 50 per cent (High Low Dinamic)📊 Daily 50% Mid – Dynamic High/Low
🔎 Description
The Daily 50% Mid is a clean and objective indicator that plots the daily equilibrium level, calculated as 50% of the distance between the daily high and daily low.
Unlike static levels, this indicator is fully dynamic: as new daily highs or lows are formed, the 50% level is recalculated in real time throughout the trading session.
⚙️ How it works
Automatically detects:
📈 Daily High
📉 Daily Low
Calculates the daily midpoint:
(
𝐷
𝑎
𝑖
𝑙
𝑦
𝐻
𝑖
𝑔
ℎ
+
𝐷
𝑎
𝑖
𝑙
𝑦
𝐿
𝑜
𝑤
)
/
2
(Daily High+Daily Low)/2
Continuously updates the levels while the trading day is in progress.
📐 What the indicator plots
🔴 Daily High line
🟢 Daily Low line
🟡 50% of the Daily Range (Daily Mid) line
🎯 Trading applications
The 50% daily midpoint is widely used as:
A daily balance / equilibrium zone
A pullback level in trending days
A rejection area in range-bound markets
A confluence level with:
VWAP
Daily open
Volume Profile
Price structure
⏱️ Recommended timeframes
Designed for intraday charts
(1m, 5m, 15m, etc.)
Ideal for day trading
Not recommended for daily charts
🧠 Notes
Works on any asset (indices, stocks, forex, crypto)
Automatically resets at the start of each trading day
No future repainting
Shadow Mode Simulator ELITE🎮 SHADOW MODE SIMULATOR — FEATURE GUIDE
Think of this as GTA with rules instead of random driving.
🏆 1. A / A+ SETUP GRADING (QUALITY CONTROL)
Every entry is graded automatically:
✅ A+ Setup (best XP)
Must have:
• HTF trend aligned
• Liquidity sweep OR perfect pullback
• High confidence (4–5)
✅ A Setup (acceptable)
Must have:
• HTF trend aligned
• ONE valid strategy condition
⚠️ B Setup (allowed but low reward)
Everything else
❌ Invalid
Bad RR or no strategy → XP penalty
👉 This trains selectivity (most traders fail here)
🗺️ 2. AUTO SESSION HEATMAP
Background turns green during your trading session.
This teaches:
✔ When liquidity is real
✔ When NOT to trade
No more random midnight scalping.
😵 3. TILT DETECTOR
Triggers when:
• 2 losses in a row
• Or cooldown active
Shows:
⚠️ TILT WARNING
This is your psychology guardian.
(Pros stop trading here. Retail blows accounts here.)
🧠 4. STRATEGY-SPECIFIC VALIDATORS
You can toggle:
✅ Liquidity sweep trades
✅ Trend pullback trades
If you enter without one → ❌ punished.
This builds:
➡️ mechanical discipline
➡️ no random clicking
⏳ 5. EMOTIONAL COOLDOWN SYSTEM
After a loss:
• You are “locked” for X candles
• No rushing back in
This rewires revenge trading.
📊 6. LIVE PERFORMANCE ENGINE
Tracks:
• XP
• Level
• Win rate
• Win/loss streak
• Trade count
• Tilt state
• HTF bias
• Setup grade
You level up by:
👉 discipline — not profit
📈 LEVEL MEANING (IMPORTANT)
Level Skill State
1–2 Impulsive
3–4 Learning patience
5–6 Controlled
7–8 Consistent
9+ Pro-ready
You should NOT trade real money seriously before level 7.
🧪 FULL LIVE TUTORIAL — HOW TO USE IT
STEP 1 — SETUP
Open TradingView
Open chart you scalp (NIFTY/BTC/etc)
Add the Shadow Mode indicator
Set:
• Session time
• HTF timeframe
• Max trades
STEP 2 — MARKET OPENS
Your job first 10–15 mins:
❌ Do nothing
👀 Just watch structure
(This alone fixes overtrading)
STEP 3 — WHEN YOU SEE A SETUP
Ask:
✔ HTF aligned?
✔ Liquidity sweep or pullback?
✔ RR good?
If yes:
👉 Click 📥 ENTRY
You’ll see:
• Grade (A / A+)
• Entry marker
STEP 4 — MANAGE LIKE A ROBOT
Do NOT interfere.
Let:
• TP
• SL
• or invalidation happen
STEP 5 — EXIT
Click:
📤 EXIT when trade is done
System:
• Awards XP
• Updates streaks
• Tracks win rate
STEP 6 — IF YOU MESSED UP
Click:
❌ RULE BREAK
(Takes XP + activates cooldown)
This hurts — on purpose.
📆 PERFECT TRAINING DAY LOOKS LIKE:
✅ 1–2 A/A+ trades
✅ maybe 1 loss
✅ stop after cooldown
✅ XP positive
Even if P&L is flat.
That’s winning.
🚫 COMMON MISTAKES (DON’T DO THESE)
❌ Clicking entry emotionally
❌ Ignoring HTF bias
❌ Overtrading
❌ Chasing candles
❌ Skipping cooldown
The simulator is designed to punish these.
🧠 WHY THIS WORKS (SCIENCE SIDE)
This trains:
• Pattern recognition
• impulse control
• delayed gratification
• process over money
Same principles used in pilot & athlete simulators.
🎯 OPTIONAL HARD MODE (WHEN READY)
• Max 1 trade/day
• Only A+ setups
• Higher RR minimum
This accelerates mastery.
Auto Parallel Channel [KTY] Auto Parallel Channel
Automatically detects and draws parallel channels based on ZigZag pivot structure. Supports multi-level channel detection, slope filtering, and channel extension after breakout.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 Features
- Auto Channel Detection
- Automatically generates parallel channels by connecting swing highs and lows
- Bullish Channel (Green): Based on HL (Higher Low) pivots
- Bearish Channel (Red): Based on LH (Lower High) pivots
- Multi-Level Structure
- Major Channels: Large trend structure (solid lines)
- Minor Channels: Short-term swing structure (dashed/dotted lines)
- 8 channels total (Major/Minor × External/Internal × Bull/Bear)
- Midline
- Dotted line at the 50% level of each channel
- Serves as a mean reversion reference
- Slope Display
- Each channel label shows its slope (%)
- Positive (+) for ascending, Negative (-) for descending
- Slope Filter
- Option to display only channels above a minimum slope threshold
- Separate threshold settings for bullish and bearish channels
- Channel Extension
- Extends the channel by N bars after price breaks out
- Adjustable extension length (default: 30 bars)
- Alerts
- Bullish Channel Touch: Price touches bullish channel support
- Bearish Channel Touch: Price touches bearish channel resistance
- Bullish Channel Break: Price breaks below bullish channel
- Bearish Channel Break: Price breaks above bearish channel
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✅ How to Use
1. Channel bottom touch → Check for bounce
2. Channel top touch → Check for resistance
3. Channel break → Check for trend reversal or acceleration
4. Midline reaction → Check for mean reversion
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
💡 Tips
- Major channels are more reliable than Minor channels
- Channel breakout with increasing volume = higher confidence
- Overlapping channels = stronger support/resistance zones
- Combine with FVG, Order Blocks, and liquidity sweeps for confluence
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📌 Notes
This indicator is open-source under the Mozilla Public License 2.0.
Created by Kim Thank You (김땡큐)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ Disclaimer
This indicator is provided for educational purposes only.
It is not financial advice. Always trade at your own risk.
[KTY] Similar Pattern Finder Similar Pattern Finder
Hi, I'm Kim Thank You 👋
KTY = Kim Thank You (김땡큐)
Finds the most similar historical price pattern and projects a future path based on what happened next.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 FEATURES
- Pattern Matching
- Scans historical bars for the closest matching price pattern
- Auto-adjusts scan range and pattern length per timeframe
- Future Projection
- Projects future price path based on what followed the matched pattern
- Scaled to current price range for accurate projection
- Endpoint price label displayed
- Signal Dashboard
- 🚀 STRONG BULL / 💥 STRONG BEAR: High confidence + directional
- 📈 BULLISH / 📉 BEARISH: Above threshold + directional
- ⚠️ LOW CONFIDENCE: Below minimum threshold
- ⏸️ NO MATCH: No valid pattern found
- Confidence % bar and projected move % displayed
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✅ HOW TO USE
- Higher confidence % = more reliable projection
- Use as directional bias, not exact price target
- Combine with support/resistance or indicators for confirmation
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
💡 TIPS
- Works best in trending or repeating market conditions
- Low confidence warnings should be taken cautiously
- Past pattern similarity does not guarantee future results
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ DISCLAIMER
This indicator is for educational purposes only.
Not financial advice. Always do your own research.
Trend Momentum v6Features
- Trend EMAs: plots Fast EMA and Slow EMA to visualize direction and strength.
- RSI Filter (optional): gates signals by RSI thresholds to reduce whipsaws.
- Multi-Timeframe (MTF): computes EMAs/RSI on a selected timeframe via request.security.
- Signals: triangle markers for Long/Short when fast EMA crosses slow EMA with optional RSI gating.
- Bar Coloring: green for up-trend, red for down-trend, neutral otherwise.
- Alerts: built-in alertcondition for Long Signal and Short Signal.
Inputs
- Signal timeframe: timeframe for EMAs/RSI; empty uses chart timeframe.
- Fast/Slow EMA length: trend speed vs smoothness (21/50 default).
- RSI length and thresholds: default RSI(14), thresholds at 50 for symmetry.
- Confirm signals on bar close: requires bar close confirmation to avoid intrabar flips.
- Show signal markers: enable/disable triangles.
- Color bars by trend: enable/disable bar coloring.
Signals
- Long: Fast EMA crosses above Slow EMA, optionally with RSI >= bull threshold.
- Short: Fast EMA crosses below Slow EMA, optionally with RSI <= bear threshold.
- Trend coloring: independent of cross signals; reflects current EMA relation plus optional RSI gating.
Tutorial
- Add to chart:
- Open TradingView → Pine Editor → paste the script → Save → Add to chart.
- Configure:
- Leave Signal timeframe empty for chart timeframe or choose higher TF (e.g., 1h while viewing 5m).
- Start with Fast EMA=21, Slow EMA=50; adjust for your market’s volatility.
- Keep RSI filter on with thresholds at 50 for balanced gating.
- Enable “Confirm signals on bar close” for stable, non-repainting entries.
- Interpret:
- Long triangle appears after a bullish EMA cross that meets RSI criteria (if enabled).
- Bars turn green when trendUp; red when trendDown; neutral when neither condition holds.
- Alerts:
- Add the indicator → Create Alert → Source: this indicator → Condition: Long Signal or Short Signal.
- Configure frequency (Once per bar close recommended when confirm is enabled).
- MTF guidance:
- For intraday, set Signal timeframe to a higher TF (15m–1h) to align entries with dominant trend.
- Using lookahead=barmerge.lookahead_off prevents future-data repainting; signals appear only when confirmed.
Customization
- Faster entries: lower Fast EMA (e.g., 13) or raise RSI bull threshold above 50 for stronger momentum.
- Smoother trend: raise Slow EMA (e.g., 100) to reduce choppiness.
- Stricter shorts: set RSI bear threshold below 50 (e.g., 45 or 40).
- Intrabar signals: disable “Confirm signals on bar close” to see crosses mid-bar (more responsive, more noise).
- Fixed indicator timeframe: if you want chart to render with gaps per fixed TF, set timeframe on indicator itself (e.g., timeframe="60") and optionally enable timeframe_gaps.
Best Practices
- Use with structure: apply on liquid instruments; combine with session/volatility filters if needed.
- Risk management: consider ATR-based stops and position sizing; signals are entries, not guarantees.
- Avoid overfitting: keep lengths and thresholds simple; validate across symbols and regimes.
Limitations
- Cross-based entries can lag at reversals and whipsaw in ranges; RSI gating helps but doesn’t eliminate noise.
- MTF aggregation can delay signals compared to the chart’s timeframe; this is expected behavior.
Triple ST + MACD + 7x MTF EMA + VWAP + ORB//@version=6
indicator('Triple ST + MACD + 7x MTF EMA + VWAP + ORB', overlay = true, max_labels_count = 500)
//━━━━━━━━━━━━━━━━━━━
// INPUTS
//━━━━━━━━━━━━━━━━━━━
// SuperTrend Group
atrPeriodPrimary = input.int(18, 'Primary ST ATR Period', group="SuperTrend")
multiplierPrimary = input.float(4.0, 'Primary ST Multiplier', group="SuperTrend")
atrPeriodSecondary = input.int(9, 'Secondary ST ATR Period', group="SuperTrend")
multiplierSecondary = input.float(2.0, 'Secondary ST Multiplier', group="SuperTrend")
atrPeriodTertiary = input.int(12, 'Tertiary ST ATR Period', group="SuperTrend")
multiplierTertiary = input.float(3.0, 'Tertiary ST Multiplier', group="SuperTrend")
// MACD Group
fastLength = input.int(24, 'MACD Fast Length', group="MACD")
slowLength = input.int(52, 'MACD Slow Length', group="MACD")
signalLength = input.int(9, 'MACD Signal Smoothing', group="MACD")
// EMA Group
tfEMA = input.timeframe("60", "EMA Timeframe (Global)", group="EMAs")
ema1Len = input.int(9, 'EMA 1 Length', group="EMAs")
ema2Len = input.int(21, 'EMA 2 Length', group="EMAs")
ema3Len = input.int(27, 'EMA 3 Length', group="EMAs")
ema4Len = input.int(50, 'EMA 4 Length', group="EMAs")
ema5Len = input.int(100, 'EMA 5 Length', group="EMAs")
ema6Len = input.int(150, 'EMA 6 Length', group="EMAs")
ema7Len = input.int(200, 'EMA 7 Length', group="EMAs")
// Visuals & ORB Group
showVwap = input.bool(true, 'Show VWAP?', group="Visuals")
showORB = input.bool(true, "Show ORB (Current Day Only)", group="ORB Settings")
orbTime = input.string("0930-1000", "ORB Time Range", group="ORB Settings")
orbTargetMult1 = input.float(1.0, "Target 1 Mult", group="ORB Settings")
//━━━━━━━━━━━━━━━━━━━
// CALCULATIONS
//━━━━━━━━━━━━━━━━━━━
// 1. Custom SuperTrend Function
f_supertrend(_atrLen, _mult) =>
atr_ = ta.atr(_atrLen)
upperBasic = hl2 + _mult * atr_
lowerBasic = hl2 - _mult * atr_
var float upperFinal = na
var float lowerFinal = na
upperFinal := na(upperFinal ) ? upperBasic : (upperBasic < upperFinal or close > upperFinal ? upperBasic : upperFinal )
lowerFinal := na(lowerFinal ) ? lowerBasic : (lowerBasic > lowerFinal or close < lowerFinal ? lowerBasic : lowerFinal )
var int dir = 1
if not barstate.isfirst
dir := dir
if dir == 1 and close < lowerFinal
dir := -1
else if dir == -1 and close > upperFinal
dir := 1
super = dir == 1 ? lowerFinal : upperFinal
= f_supertrend(atrPeriodPrimary, multiplierPrimary)
= f_supertrend(atrPeriodSecondary, multiplierSecondary)
= f_supertrend(atrPeriodTertiary, multiplierTertiary)
// 2. MACD
macdLine = ta.ema(close, fastLength) - ta.ema(close, slowLength)
signal = ta.ema(macdLine, signalLength)
// 3. MTF EMAs (7 Options)
ema1 = request.security(syminfo.tickerid, tfEMA, ta.ema(close, ema1Len), gaps = barmerge.gaps_on)
ema2 = request.security(syminfo.tickerid, tfEMA, ta.ema(close, ema2Len), gaps = barmerge.gaps_on)
ema3 = request.security(syminfo.tickerid, tfEMA, ta.ema(close, ema3Len), gaps = barmerge.gaps_on)
ema4 = request.security(syminfo.tickerid, tfEMA, ta.ema(close, ema4Len), gaps = barmerge.gaps_on)
ema5 = request.security(syminfo.tickerid, tfEMA, ta.ema(close, ema5Len), gaps = barmerge.gaps_on)
ema6 = request.security(syminfo.tickerid, tfEMA, ta.ema(close, ema6Len), gaps = barmerge.gaps_on)
ema7 = request.security(syminfo.tickerid, tfEMA, ta.ema(close, ema7Len), gaps = barmerge.gaps_on)
// 4. ORB CALCULATION (Current Day Only)
is_new_day = ta.change(time("D")) != 0
in_orb = not na(time(timeframe.period, orbTime))
is_today = (year(time) == year(timenow)) and (month(time) == month(timenow)) and (dayofmonth(time) == dayofmonth(timenow))
var float orbHigh = na
var float orbLow = na
if is_new_day
orbHigh := na
orbLow := na
if in_orb and is_today
orbHigh := na(orbHigh) ? high : math.max(high, orbHigh)
orbLow := na(orbLow) ? low : math.min(low, orbLow)
orbRange = orbHigh - orbLow
t1_up = orbHigh + (orbRange * orbTargetMult1)
t1_dn = orbLow - (orbRange * orbTargetMult1)
//━━━━━━━━━━━━━━━━━━━
// PLOTTING
//━━━━━━━━━━━━━━━━━━━
// VWAP
plot(showVwap ? ta.vwap : na, title="VWAP", color=color.orange, linewidth=2)
// Triple SuperTrends
plot(stPrimary, title='Primary ST', color=dirPrimary == 1 ? color.green : color.red, linewidth=2)
plot(stSecondary, title='Secondary ST', color=dirSecondary == 1 ? color.teal : color.maroon, linewidth=1)
plot(stTertiary, title='Tertiary ST', color=dirTertiary == 1 ? color.lime : color.orange, linewidth=1)
// 7 EMAs
plot(ema1, title='EMA 1', color=color.new(color.white, 50))
plot(ema2, title='EMA 2', color=color.new(color.yellow, 60))
plot(ema3, title='EMA 3', color=color.new(color.orange, 70))
plot(ema4, title='EMA 4', color=color.new(color.blue, 70))
plot(ema5, title='EMA 5', color=color.new(color.purple, 70))
plot(ema6, title='EMA 6', color=color.new(color.fuchsia, 80))
plot(ema7, title='EMA 7', color=color.new(color.gray, 80))
// ORB Plots
plot(showORB and is_today ? orbHigh : na, title="ORB High", color=color.aqua, linewidth=2, style=plot.style_linebr)
plot(showORB and is_today ? orbLow : na, title="ORB Low", color=color.aqua, linewidth=2, style=plot.style_linebr)
plot(showORB and is_today and not in_orb ? t1_up : na, title="Target 1 Up", color=color.new(color.lime, 40), style=plot.style_linebr)
plot(showORB and is_today and not in_orb ? t1_dn : na, title="Target 1 Down", color=color.new(color.red, 40), style=plot.style_linebr)
// MACD Shapes
plotshape(ta.crossover(macdLine, signal), title="MACD Bull", style=shape.triangleup, location=location.belowbar, color=color.green, size=size.small, text="MACD+")
plotshape(ta.crossunder(macdLine, signal), title="MACD Bear", style=shape.triangledown, location=location.belowbar, color=color.red, size=size.small, text="MACD-")
// Background (Based on Primary ST)
bgcolor(dirPrimary == 1 ? color.new(color.green, 96) : color.new(color.red, 96))
guild wcaallows to identify trends and is very good yes it is guild ahh indicator just if yiu know yiou knoq
Fixed Range Line Buy Sell1buy and sell as per the signals generated
lines change color as per the close
CANDLE STRUCTURE FILTER PRO by HeruprastCandle Structure Filter
CANDLE STRUCTURE FILTER PRO is a price-action-based indicator that filters trading signals using candle body strength, wick ratio, and EMA trend alignment. It only generates non-repainting BUY/SELL signals on strong candles with valid structure, aligned with the selected trend EMA, and confirmed by an EMA Gap Filter to avoid sideways or choppy market conditions.
Designed for scalping to intraday trading, especially effective on volatile instruments like XAUUSD, with automatic calibration based on timeframe and instrument characteristics.
Risk Calculator Pro by GvdMRisk Calculator Pro - Professional position sizing tool for CFD and CME futures traders. Automatically calculates lot size or contracts based on your risk budget and stop distance. Features auto-detection of popular instruments (Gold, Silver, Oil, Indices), multiple entry modes (current price, manual, previous candle, swing points), and visual profit targets with customizable risk:reward ratios. Displays comprehensive risk table and price level lines with smart labels showing points/ticks and position size. Perfect for disciplined risk management across any timeframe.
LuxAlgo Style UHL Oscillator🧠 LuxAlgo-Style UHL Oscillator – How It Works
🔹 What “UHL” Means
UHL = Upper–Lower Histogram / Levels
It measures who controls the market right now:
Buyers (bullish pressure)
Sellers (bearish pressure)
Instead of price, it tracks momentum strength inside a fixed range.
📊 Structure of the Indicator
🟢 Green Line (Upper Pressure)
Represents bullish momentum
Shows how strong buyers are
Stronger when price pushes efficiently upward
🔴 Red Line (Lower Pressure)
Represents bearish momentum
Shows selling aggression
Stronger during sharp downward moves
⚪ Middle Line (50 Level)
Equilibrium / balance point
Above → buyers dominate
Below → sellers dominate
🟣 Upper & Lower Bands (e.g. 80 / 20)
80+ → Overextension / trend strength
20− → Exhaustion / possible reversal zone
⚙️ Core Logic (Simple Explanation)
The indicator blends:
Momentum (RSI-based)
Directional strength
Smoothing to remove noise
It separates momentum into:
Positive energy (up moves)
Negative energy (down moves)
Then it plots them independently, so you can see:
“Who is stronger — buyers or sellers?”
🧠 How to Read It (Step-by-Step)
✅ Bullish Confirmation
Green line above red
Both above 50
Green expanding upward
📌 Meaning:
Buyers are in control → trend continuation likely
❌ Bearish Confirmation
Red line above green
Below 50
Red expanding downward
📌 Meaning:
Sellers dominate → sell continuation
⚠️ Reversal / Pullback Signal
Strong trend → lines compress
Momentum weakens near 80 or 20
Color dominance starts flipping
📌 Meaning:
Trend slowing → retracement or reversal possible
🧲 Range / Manipulation Zone
Both lines flat near 50
No expansion
📌 Meaning:
Liquidity grabs / chop → avoid entries
🥇 Why Professional Traders Like It
Shows momentum quality, not just direction
Filters fake breakouts
Works perfectly with:
Structure
Liquidity sweeps
Session timing (London / NY)
Very effective on Gold (XAUUSD)
🎯 Best Use Case for Gold
Timeframes: M5 – M15 – H1
Use after:
Liquidity grab
BOS / CHoCH
Enter only when dominance is clear
🧠 Pro Tip
Price tells you WHERE, UHL tells you IF
Never trade UHL alone — use it to confirm, not predict.
FVG Detector - With Close Direction & Breakoutgreat. now, after the touching candle the ones that obeyed the last command with zero balls, indicate when the next candle, ie the candle following the ones with yellow and green balls, trades above the high of the yellow balls candle and vice versa. ie for yellow balls(candles that trade up to touch the fvg), the next candle after it will have to trade above the high of the touching yellow candle. and vice versa for the green one
Bookmap-ish Volume Diagram Aggregated Delta + Level Flags [v5.3]What this gives you
✅ True volume-diagram pane (no chart overlay)
✅ Buy vs Sell columns (aggression visualization)
✅ Net delta bars
✅ Pressure oscillator + signal
✅ CVD
✅ Bookmap-style “pressure at levels” flags
(upper = supply, lower = demand, VWAP = acceptance)
SMT Detector PRO [UFVG]The best currently available SMT indicator.
Main advantage that it scans multiple pivot lengths at once so it doesn't miss any smt.
It initially shows SMT with grey color which means that pivot is still unconfirmed.
Unconfirmed SMTs can disappear if price invalidates them.
