立即開始

圖表形態

STRAT 3-2-2 (30m) • Upcoming / Approach / Entry + AlertsThis indicator is built for The STRAT trading method, specifically the 3-2-2 reversal pattern. It monitors price action on the 30-minute timeframe (HTF = 30m) and visually/alert-wise highlights where a 3-2-2 setup, approach, or entry trigger occurs. --- ⚙️ How it works 1. Detects bar types: 3 (Outside Bar) = range breaks both high & low of the previous bar 2u (Up bar) = higher high, not outside 2d (Down bar) = lower low, not outside 1 (Inside bar) = fully contained within prior bar 2. Looks for 3-2-2 setups: Bullish 3-2-2 = 3 → 2d → 2u (expect reversal UP) Bearish 3-2-2 = 3 → 2u → 2d (expect reversal DOWN) 3. Defines trigger levels: Bullish trigger = high of the first “2d” bar Bearish trigger = low of the first “2u” bar 4. Signals 3 phases: Upcoming: pattern is forming, second “2” hasn’t triggered yet Approach: price comes within 50% (adjustable) of the trigger level Entry: price breaks the trigger (actual reversal confirmation) 5. Visualization: Labels above/below candles show “Approach” and “Entry” Background or bar colors (toggle in settings) highlight Setup / Approach / Entry Optional dotted line marks the trigger level for clarity --- 🔔 Alerts Two alert systems are built in: 1. Safe static conditions (for normal TradingView alert setup): APPROACH: Bullish 3-2-2 (30m) APPROACH: Bearish 3-2-2 (30m) ENTRY: Bullish 3-2-2 (30m) ENTRY: Bearish 3-2-2 (30m) 2. Dynamic messages (using alert() calls with price info): If you create an alert with “Any alert() function call”, the pop-up will include the trigger price. --- 📋 Inputs (Settings) Signal timeframe (HTF) → default 30m Confirm signals at HTF bar close → waits for bar close (non-repainting) Approach = % of first '2' bar range → default 50% Show labels → On/Off Color candles instead of background → toggle between candle color vs. chart background
Pine Script®指標
由joktonk提供
Market Pulse Dip RadarThis indicator is designed to help traders spot meaningful dips in price and then evaluate whether those dips are worth trading or not. It doesn’t just mark a dip; it also helps with risk management, trade planning, and filtering out weak signals. Here’s how it works: First, it looks at the recent high price and checks how much the market has dropped from that high. If the drop is larger than the minimum percentage you set, it marks it as a potential dip. Next, it checks the trend structure by using two moving averages (a fast one and a slow one). If the fast average is below the slow average, it means the market is in a weaker structure, and that dip is considered more valid. On top of that, you can enable a multi-timeframe filter. For example, if you are trading on the 15-minute chart, you can ask the indicator to confirm that the 1-hour trend is also supportive before showing you a dip. This helps avoid trading against the bigger trend. Risk management is built in. The indicator automatically suggests a stop-loss by combining volatility (ATR) and recent swing lows. It then draws three profit target levels (1x risk, 2x risk, and 3x risk). This makes it easier to plan where to exit if the trade works. A key part of this tool is the confidence score. Each dip signal is rated from 0 to 100. The score depends on how deep the dip is, how far apart the moving averages are, how healthy volatility is, and whether the higher timeframe supports the trade. The score is then labeled as High, Medium, Low, or Wait. This helps traders focus only on the stronger setups. On the chart, dip signals are marked with a diamond shape under the bars. The color of the diamond tells you if it’s high, medium, or low quality. When a signal appears, the indicator also plots horizontal lines for the entry, stop, and targets. To make it easier to read, there is also a dashboard box that shows the current score, quality, dip percentage, and suggested stop-loss. This means you don’t have to calculate or check different things yourself – everything is visible in one place. Finally, it comes with alerts. You can set alerts for when a dip signal happens, or when it’s medium or high confidence. This way, you don’t need to stare at charts all day; TradingView can notify you. So in short, this tool: • Finds dips based on your rules. • Filters them using structure, volatility, and higher timeframe trend. • Suggests stop-loss and profit targets. • Rates each dip with a confidence score. • Shows all this info in a clean dashboard and alerts you when it happens. 👉 Do you want me to now explain how a trader would actually use it in practice (step by step, from signal to trade)?
Pine Script®指標
由SupertradeOfficial提供
B A N K $ - Breaks & SweepsThis indicator automatically maps on Breaks of Structure & Liquidity Sweeps. It works by calculating pivot points based on how many candles are above/below either side of a pivot. The user can manually set how many candles need to be above/below either side of a pivot if they would prefer to change it. The indicator will dynamically adjust the lines as the user changes timeframe to allow for seamless analysis. Features Break of Structure lines Liquidity Sweep lines Dealing Range - this allows the user to visualise the current dealing range Explanation A sweep is determined by whether a candle closes through a pivot point with a body closure or not. If the candle wicks this level but fails to close through it, the line will turn red to indicate a liquidity sweep. If the following 3 candles go on to close through the break line, this will then update it from a red sweep line to the normal break line again. (sometimes the initial candle that touches a level will not close through it but price will continue to break that level in the next few candles).
Pine Script®指標
由wintonbanks提供
Position Size CalculatorPosition Size Calculator This open-source Pine Script® indicator helps traders manage risk by calculating position size, margin, and risk/reward based on account size, leverage, entry, stop-loss, and take-profit. It features a customizable table and optional chart lines/labels for clear trade planning across stocks, forex, crypto, and futures. What It Does - Position Size: Computes units to trade based on risk percentage and stop-loss distance, capped by leverage. - Margin: Calculates initial margin in base currency and USD, with account size percentage. - Risk/Reward: Shows risk-reward ratio, percentage price movements, and USD gains/losses. - Visualization: Displays results in a table and optional chart lines/labels with customizable styles. How It Works - Precision: Adjusts price formatting using syminfo.mintick for accuracy across assets. - Calculations: Position size = accountSize * (riskPercent / 100) / |entry - stoploss|, capped by accountSize * leverage / entry. Margin = positionSize / leverage. Risk-reward = |takeprofit - entry| / |stoploss - entry|. - Display: Table shows metrics; optional lines/labels plot entry, stop-loss, and take-profit with percentage and USD details. How to Use - Set Inputs: 1- Account Size (USD): Your capital (e.g., 1000). 2- % Risk per Trade: Risk tolerance (e.g., 1%). 3- Leverage: Broker leverage (e.g., 1x, 10x). 4- Entry, Stop Loss, Take Profit: Trade prices. 5- Show Lines and Labels: Enable chart overlays. - Customize: Adjust table position, colors, and line styles (Solid, Dashed, Dotted). - View Results: Table shows position size, margin, and risk/reward. Chart lines/labels (if enabled) display prices, percentages, and USD outcomes. - Apply: Use metrics for trade execution; modify code for custom features. Notes - Ensure valid inputs (entry ≠ stop-loss, both positive) to avoid “N/A”. - Open-source: Inspect or extend the code for your needs. - Contact the author via TradingView for feedback.
Pine Script®指標
由traderharo提供
Advanced Pattern Detection System [50+ Patterns]【Advanced Pattern Detection System - Auto-detects 50+ Chart Patterns】 Introducing the most powerful pattern detection indicator for TradingView! ◆ What is this? An automated tool that finds and displays over 50 chart patterns on your charts. It detects all the patterns professional traders use - Double Tops, Triangles, Head & Shoulders, and more - all in ONE indicator. ◆ Main Features ・Detects 50+ patterns in real-time ・Shows visual explanation of WHY each pattern was identified ・Automatically calculates theoretical target prices ・Displays confidence levels in % (60-95%) ・Choose panel position from 9 locations ・Works on all timeframes (1min to Monthly) ◆ Detectable Patterns 1. Classic Patterns (Double Top/Bottom, Head & Shoulders, etc.) 2. Triangle Patterns (Ascending, Descending, Symmetrical, Expanding) 3. Continuation Patterns (Flags, Pennants, Wedges, etc.) 4. Harmonic Patterns (Gartley, Butterfly, Bat, etc.) 5. Price Action (Pin Bar, Engulfing, Hammer, etc.) 6. Special Patterns (Cup & Handle, V-formations, etc.) ◆ What Makes It Different ・Not just detection - shows the reasoning behind it ・Auto-draws pivot points and necklines ・Displays target prices with % gain/loss from current price ・Detects multiple patterns simultaneously, sorted by confidence ・Available in both Japanese and English versions ◆ Perfect For ✓ Anyone tired of using multiple indicators ✓ Beginners wanting to learn pattern trading ✓ Traders who don't want to miss entry points ✓ Those looking to improve discretionary trading accuracy ◆ How to Use (Easy 3 Steps) 1. Open TradingView and paste code in Pine Editor 2. Click "Add to Chart" 3. Enable only the patterns you need in settings ◆ Color Meanings Green → Bullish potential (Buy signal) Red → Bearish potential (Sell signal) Yellow → Neutral direction (Wait and see) ◆ Recommended Settings Scalping: Detection period 20, Sensitivity 0.0025 Day Trading: Detection period 50, Sensitivity 0.002 Swing Trading: Detection period 100, Sensitivity 0.0015 ◆ Real Trading Example "Detects Double Bottom → 85% confidence → Enter on neckline break → Take profit at displayed target price" This is how you can use it in practice. ◆ Important Notes ・This is an analysis tool, not investment advice ・Always combine with other indicators ・Always set stop losses ・Practice on demo account before live trading ◆ Performance If running slow, turn OFF unused pattern categories. Reducing max display count to 3 also helps. ◆ Summary This single tool provides functionality that would normally require multiple paid indicators (worth $100-200 total). It's the ultimate pattern detection system recommended for all traders, from beginners to professionals. Give it a try if interested! Feel free to ask questions in the comments.
Pine Script®指標
由Hunk77提供
7
Ai Golden Support and Resistance Adaptive Support & Resistance (ADR-scaled ABCD + Breakout/Retest Zones) What it does This indicator detects actionable support/resistance zones from swing structure and breakout events, then keeps each zone active until it’s invalidated by price. It adapts zone sensitivity using Average Daily Range (ADR) so the same rules scale across symbols and vol regimes. Core Logic (high level) Swing & ABCD pattern seed Detects alternating pivots (high–low–high–low or low–high–low–high) using a user-selected lookback. Validates basic AB–BC–CD proportions: BC must retrace a portion of AB; CD must extend BC within a set range. From a valid sequence, sets a candidate level (top for bearish, bottom for bullish). Breakout confirmation A level becomes confirmed when price closes beyond it (crossover/crossunder). On confirmation, the script draws a dotted reference line and records how many bars elapsed from the seed pivot to breakout. That count defines the lookback window used for local extremes. Zone construction Supply (bearish): builds a box around the most recent local range near the bearish seed; Demand (bullish): builds a box around the most recent local range near the bullish seed. Each zone’s height is derived from nearby extremes and the seed swing, so boxes reflect local structure rather than fixed pip widths. Volatility normalization (ADR%) ADR is computed from daily candles. The Risk Profile input (“High/Medium/Low”) scales required move sizes using ADR%, and adjusts pivot sensitivity (fewer/more bars). Higher risk → more sensitive (smaller ADR %, tighter pivot lookback). Lower risk → stricter filters (larger ADR %, wider pivot lookback). Explosive-move filter (streak logic) Searches the seeded lookback for consecutive same-color candles (config via the risk profile). Requires the cumulative % move of that streak to exceed an ADR-scaled threshold. When found, the zone is tagged as originating from an “explosive” move (potentially higher reaction probability). Zone persistence & invalidation Zones persist and auto-extend to the right until invalidated. Invalidation occurs when price closes through a rule-based threshold derived from the seed structure (stored per zone). Once invalidated, the zone is marked inactive and stops updating. Inputs & Controls Risk Profile: High / Medium / Low (sets pivot lookback, streak length, and ADR% thresholds). Labels & Visuals: Toggle labels and level lines; set line width. Colors/Boxes: Supply (red), Demand (green); dotted breakout references. No broker/session settings are required; the script adapts per symbol via ADR. On-Chart Elements Dotted breakout lines at confirmed levels (with measured bars-to-breakout). Supply/Demand boxes that extend until invalidation. Optional labels for clarity; minimal clutter by default. How to Use Context: Use higher-TF context for bias; apply zones on your trading TF. Confluence: Combine zones with your own triggers (structure breaks, rejection wicks, momentum shifts). Invalidation: If price closes beyond a zone’s invalidation threshold, treat that zone as inactive. Sensitivity: If too many zones appear, switch to Medium/Low Risk (stricter ADR% & pivots); if too few, use High Risk. Notes & Limitations Logic is rule-based; there is no machine learning. Daily ADR is computed from D timeframe, so intraday charts inherit daily volatility context. Results vary by symbol and timeframe; validate settings per market. This is an indicator (no orders or P/L).
Pine Script®指標
由GoldenCryptoSignals提供
P/B Ratio (Per Share) vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Book (P/B) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/B ratio drops below the lower Bollinger Band, which is calculated directly from the P/B ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Pine Script®指標
由traceockinga提供
P/E Ratio vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Earnings (P/E) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/E ratio drops below the lower Bollinger Band, which is calculated directly from the P/E ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Pine Script®指標
由traceockinga提供
P/S Ratio vs Median + Bollinger Band- 📝 This indicator highlights potential buying opportunities by analyzing the Price-to-Sales (P/S) ratio in relation to Bollinger Bands and its historical median. - 🎯 The goal is to provide a visually intuitive signal for value-oriented entries, especially when valuation compression aligns with historical context. - 💡 Vertical green shading is applied when the P/S ratio drops below the lower Bollinger Band, which is calculated directly from the P/S ratio itself — not price. This condition often signals the ticker may be oversold. - 🟢 Lighter green appears when the ratio is below the lower band but above the median, suggesting a possible shorter-term entry with slightly more risk. - 🟢 Darker green appears when the ratio is both below the lower band and below the median, pointing to a potentially stronger, longer-term value entry. - ⚠️ This logic was tested using 1 and 2-day time frames. It may not be as helpful in longer time frames, as the financial data TradingView pulls in begins in Q4 2017. - ⚠️ Note: This script relies on financial data availability through TradingView. It may not function properly with certain tickers — especially ETFs, IPOs, or thinly tracked assets — where P/S ratio data is missing or incomplete. - ⚠️ This indicator will not guarantee successful results. Use in conjunction with other indicators and do your due diligence. - 🤖 This script was iteratively refined with the help of AI to ensure clean logic, minimalist design, and actionable signal clarity. - 📢 Idea is based on the script "Historical PE ratio vs median" by @haribotagada - 💬 Questions, feedback, or suggestions? Drop a comment — I’d love to hear how you’re using it or what you'd like to see changed.
Pine Script®指標
由traceockinga提供
Gap Detector (Body and Candle)Finds/Detects gaps between candles and candle bodies for any chart/timeframe with O(n+delta) performance. Candle Gaps (between wicks) act as strong support or resistance. They are drawn as solid boxes. Body Gaps (ignores wicks) act as mild support or resistance. They are depicted with lines. Adjust the settings for candle/body gap width, smaller the time frame, smaller the gap. Adjust max historical bars to fine tune performance on your system/setup. The more historical bars the script scans, more time required to load the chart. At times based on system configuration, TradingView may timeout the script due to too many bars. Reducing the max bars helps in this scenario. This is a revamped version of "Body Gap Detector". Happy charting !
Pine Script®指標
由prashanthraju提供
MEMA X-OL9+A. 5, 10, 20, 50 ema's B. When the 10 goes below the 20 it has shades of red between the 10 and 20. C. When there is a downward crossover, There will be a Red arrow pointing down. D. When the 10 is moving closer (upward) towards the 20 it has orange shading. I use this to catch 10 over 20 crossovers. E. When there is a crossover 10 over 20 it will shade green and have a gold arrow pointing upward. A little redundant, because you'll see the crossover from the shading. F. Finally there will be smaller blue arrows that represent when there is a close of a candle, if it is lower than the prior candle. All customizable and defaults should work.
Pine Script®指標
由CrusherWI提供
HTF HV Lines + Exceptional + Nearest Breakout (core only)Non-repainting breakout tool that maps high-volume (HV) levels from a higher timeframe (Daily by default) onto any intraday chart. It detects new HV bars only when the higher-timeframe candle closes, then draws persistent horizontal lines at that bar’s high and low. Optionally color “exceptional” volume events. On the trading timeframe, the script watches the nearest HV line and flags breakouts using OHLC quality checks: ATR-scaled close distance, minimum real body, and small opposite wick. Inputs let you cap stored events, tune strictness, ignore stale lines, and manage visual style easily.
Pine Script®指標
由kumarlalit6481提供
Third Eye ORB Pro (0915-0930 IST, no-plot)Third Eye ORB Pro (Opening Range Breakout + Range Mode) This indicator is designed specifically for Indian stocks and indices (NIFTY, BANKNIFTY, FINNIFTY, MIDCAP, etc.) to track the Opening Range (09:15–09:30 IST) and generate actionable intraday trade signals. It combines two key modes — Range Mode (mean reversion inside the opening range) and Breakout Mode (momentum trading beyond the range). 1. Opening Range Framework (09:15–09:30 IST) The indicator automatically plots the Opening Range High (ORH) and Opening Range Low (ORL) after the first 15 minutes of market open. The area between ORH and ORL acts as the intraday battlefield where most price action occurs (historically ~70–80% of the day is spent inside this zone). A shaded box and horizontal lines mark this range, serving as a visual reference for support and resistance throughout the day. 2. Range Mode (Mean Reversion Inside OR) When price trades inside the Opening Range, the indicator looks for edge rejections to capture range-bound trades. Range BUY (RB): Triggered near ORL when a bullish rejection candle forms (strong body + long lower wick). Range SELL (RS): Triggered near ORH when a bearish rejection candle forms (strong body + long upper wick). Optional filters (toggleable in settings): RSI Filter: Only allow range buys if RSI is oversold (≤45) and range sells if RSI is overbought (≥55). VWAP Filter: Only allow range trades if price is not too far from VWAP (distance ≤ X% of OR size). Labels show suggested Stop Loss (just outside the OR band) and Target (midline/VWAP). Cooldown logic prevents consecutive whipsaw signals. 3. Breakout Mode (Directional Moves Beyond OR) When price closes strongly outside the ORH/ORL with momentum, the indicator confirms a breakout/breakdown trade. Buffers are applied to avoid false breakouts: ATR Buffer: Price must extend at least ATR × multiplier beyond the range edge. % Buffer: Price must extend at least a percentage of OR size (default 10%). Confirmation Filters: Candle must have a strong body (≥60% of total bar range). Optional “two closes” rule: price must close outside the range for 2 consecutive candles. BUY BO: Trigger when price closes above ORH + buffer with momentum. SELL BD: Trigger when price closes below ORL – buffer with momentum. Labels and alerts are plotted for quick action. 4. Practical Usage Works best on 5-minute charts for intraday trading. Designed to help traders capture both: Range-bound moves during the day (mean reversion plays). Strong directional breakouts when institutions push price beyond the opening range. Particularly effective on expiry days, trending sessions, and major news days when breakouts are more likely. On sideways days, Range Mode provides reliable scalp opportunities at the OR edges. 5. Features Auto-plots Opening Range High, Low, Midline. Box + line visuals (no repainting). Buy/Sell labels for both Range Mode and Breakout Mode. Customizable buffers (ATR, % of range) to suit volatility. Alerts for all signals (breakouts and range plays). Built with risk management in mind (suggested SL and TP shown on chart).
Pine Script®指標
由Spoiltbrat提供
REMS Snap Shot OverlayThe REMS Snap Shot indicator is a multi-factor, confluence-based system that combines momentum (RSI, Stochastic RSI), trend (EMA, MACD), and optional filters (volume, MACD histogram, session time) to identify high-probability trade setups. Signals are only triggered when all enabled conditions align, giving the trader a filtered, visually clear entry signal. This indicator uses an optional 'look-back' feature where in it will signal an entry based on the recency of specified cross events. To use the indicator, select which technical indicators you wish to filter, the session you wish to apply (default is 9:30am - 4pm EST, based on your chart time settings), and if which cross events you wish to trigger a reset on the cooldown. The default settings filter the 4 major technical indicators (RSI, EMAs, MACD, Stochastic RSI) but optional filters exist to further fine tune Stochastic Range, MACD momentum and strength, and volume, with optional visual cues for MACD position, Stochastic RSI position, and volume. EMAs can be drawn on the chart from this indicator with optional shaded background. This indicator is an alternative to REMS First Strike, which uses a recency filter instead of a cool down.
Pine Script®指標
由KodiakMarket提供