立即開始

成交量

Engolfo Pro [ 4V + Vol + RSI + Stoch + EMAs ]📌 Engulfing Pro This indicator detects reversal engulfing patterns based on 4-candle price action, with multiple configurable technical filters — ideal for confirming signals with higher reliability. 🔍 How it works: Bullish Engulfing: 3 red candles + 1 green candle engulfing the previous Bearish Engulfing: 3 green candles + 1 red candle engulfing the previous ✅ Technical Filters: Volume above average RSI in overbought/oversold zones Slow Stochastic (Stoch K) Confluence with up to 6 moving averages (EMAs/SMA) 🧾 Additional Features: Automatic alerts Table with engulfing counters and real-time RSI/Stoch readings Interactive panel with customizable table position Clean and responsive design ⚙️ Customization: Enable or disable each filter to match your strategy Set table position Adjust RSI, Stoch, and Volume parameters 🔧 Developed by P2Coin
Pine Script®指標
由P2Coin提供
1
ATR Dashboard (Pane Only)🔧 Core Logic ATR Source: Multi-timeframe ATR (default 1H while trading 5m/15m). Threshold Rule: TREND = ATR > (ATR_SMA × k) NORMAL = otherwise Sessions: Only evaluates during London (02:00–07:00 ET) and New York (07:00–11:30 ET) by default. Smoothing: ATR compared against its SMA (default 10-period). k Multiplier: Controls sensitivity (default 1.20). 🖥️ Visuals ✅ TREND: Green label (or green background if enabled). ⚪ NORMAL: Gray label. ⏸️ OUT OF SESSION: Dim label, so you don’t force trades off-hours. 📊 Optional panel shows ATR, ATR_SMA, and Threshold values in real time. 📊 Dashboard + Overlay Combo Use this overlay on your chart TF for tactical entries. Pair with an ATR Dashboard (pane) on a higher TF (like 1H) for the strategic backdrop. Overlay TREND + Dashboard TREND → High conviction trending environment. Overlay TREND but Dashboard NORMAL → Fragile breakout, trade smaller or pass. Both NORMAL → Chop/range → stick to 1:1.4 BE rules. ⚖️ Trading Playbook Integration NORMAL Mode (ATR below threshold) 50% partial at 1R. BE @ 1:1.4. Runner capped at 2R. TREND Mode (ATR above threshold) 50% partial at 1R. BE @ 1:1.6. Remainder trails ATR ×1.5. Reserve ~15% of trend trades as no-partials for fat-tail home runs (4R–6R+). 🔔 Alerts ATR Trend ON (in session) → “ATR > Threshold → Switch to TREND BE (1:1.6).” ATR Trend OFF (in session) → “ATR ≤ Threshold → Switch to NORMAL BE (1:1.4).” Perfect for getting pinged the moment volatility regime flips. 📌 Tips k = 1.20 → balanced (default). k = 1.10–1.15 → more TREND calls (sensitive). k = 1.30+ → only strongest trends count. Run it with overlay ON chart TF for execution, and dashboard on HTF for context. Best used during active London/NY sessions. ✅ This isn’t a signal generator. It’s a regime filter + risk manager. It keeps you from chasing chop and helps you mechanically switch BE rules without hesitation. ⚡ Pro tip: Combine with a Trend Continuation HUD, Elliott Wave Convergence overlay, or a Bollinger+RSI/MFI reversal scanner for a full tactical playbook.
Pine Script®指標
由Tradebeast911提供
ATR Trend Switch (ATR > k*ATR_SMA) - Overlay + Session Windows🔧 Core Logic ATR Source: Multi-timeframe ATR (default 1H while trading 5m/15m). Threshold Rule: TREND = ATR > (ATR_SMA × k) NORMAL = otherwise Sessions: Only evaluates during London (02:00–07:00 ET) and New York (07:00–11:30 ET) by default. Smoothing: ATR compared against its SMA (default 10-period). k Multiplier: Controls sensitivity (default 1.20). 🖥️ Visuals ✅ TREND: Green label (or green background if enabled). ⚪ NORMAL: Gray label. ⏸️ OUT OF SESSION: Dim label, so you don’t force trades off-hours. 📊 Optional panel shows ATR, ATR_SMA, and Threshold values in real time. 📊 Dashboard + Overlay Combo Use this overlay on your chart TF for tactical entries. Pair with an ATR Dashboard (pane) on a higher TF (like 1H) for the strategic backdrop. Overlay TREND + Dashboard TREND → High conviction trending environment. Overlay TREND but Dashboard NORMAL → Fragile breakout, trade smaller or pass. Both NORMAL → Chop/range → stick to 1:1.4 BE rules. ⚖️ Trading Playbook Integration NORMAL Mode (ATR below threshold) 50% partial at 1R. BE @ 1:1.4. Runner capped at 2R. TREND Mode (ATR above threshold) 50% partial at 1R. BE @ 1:1.6. Remainder trails ATR ×1.5. Reserve ~15% of trend trades as no-partials for fat-tail home runs (4R–6R+). 🔔 Alerts ATR Trend ON (in session) → “ATR > Threshold → Switch to TREND BE (1:1.6).” ATR Trend OFF (in session) → “ATR ≤ Threshold → Switch to NORMAL BE (1:1.4).” Perfect for getting pinged the moment volatility regime flips. 📌 Tips k = 1.20 → balanced (default). k = 1.10–1.15 → more TREND calls (sensitive). k = 1.30+ → only strongest trends count. Run it with overlay ON chart TF for execution, and dashboard on HTF for context. Best used during active London/NY sessions. ✅ This isn’t a signal generator. It’s a regime filter + risk manager. It keeps you from chasing chop and helps you mechanically switch BE rules without hesitation. ⚡ Pro tip: Combine with a Trend Continuation HUD, Elliott Wave Convergence overlay, or a Bollinger+RSI/MFI reversal scanner for a full tactical playbook.
Pine Script®指標
由Tradebeast911提供
Institutional Interest DisplayIndicator Overview: This dashboard helps evaluate stocks quickly based on Market Cap, 52-week positioning, and liquidity metrics. It combines price strength with volume demand signals for breakout or institutional interest. Logic Implemented: 1. Market Cap Classification: - Market Cap = close × shares_outstanding (built-in value if available) - Large-cap: ≥ ₹20,000 Cr - Mid-cap: ₹5,000 – 20,000 Cr - Small-cap: < ₹5,000 Cr 2. 52-Week Range (% from High/Low): - 52W High = ta.highest(high, 252) - 52W Low = ta.lowest(low, 252) - % from 52W High = (Close ÷ 52W High – 1) × 100 - % from 52W Low = (Close ÷ 52W Low – 1) × 100 - CANSLIM logic → Prefer stocks near highs, avoid near lows 3. Average Daily Volume (ADV): - ADV = ta.sma(volume, 50) - Chosen 50D (more reliable than 20/30D, smooths anomalies) 4. Breakout Volume Confirmation: - Volume Signal = Current Volume ÷ ADV - Breakout Threshold = >1.5 × ADV - Helps detect demand-driven price breakouts 5. % Change in Volume vs ADV: - %Chg = ((Current Vol ÷ ADV) – 1) × 100 - Indicates abnormal activity vs typical trading 6. Up/Down Volume Ratio (U/D Ratio): - Defined as: (Sum of volume on up days ÷ Sum of volume on down days) - 50-day window - U/D > 1 = net buying pressure - U/D > 1.2 = stronger institutional demand 7. Up Days with Volume ≥ 1.5 × ADV: - Counts number of up days (Close > Previous Close) in last 50 days where Volume ≥ 1.5 × ADV 8. Average Turnover: - AvgTurnover = Avg Volume × Price - Thresholds: - Large-cap ≥ 1000M - Mid-cap ≥ 200M - Small-cap ≥ 50M Table Layout: - 4 Columns: - Col 1 → Category, Market Cap, % from 52W Low, % from 52W High - Col 2 → Values for above - Col 3 → Avg Volume, Vol Today, %Chg Vol, U/D Ratio - Col 4 → Values for above + Up Days >1.5 × ADV, Avg Turnover Color Coding: - Value cells have distinct background colors - Labels = black text, grey background - Green highlights signify thresholds met
Pine Script®指標
由karkeraashwith提供
Trend Continuation — Compact HUD Pane 🖥️ Trend Continuation HUD Panel — Multi-Factor Dashboard This panel is your trend continuation command center ⚡. Instead of guessing which filters are in play, the HUD shows you a real-time checklist of up to 6 confluence filters — with clear ✔ and ✖ signals. 🔍 What it shows Each row = one filter. Green ✔ means it’s passing in the trend direction, red ✖ means it’s failing, grey ✖ means neutral/inactive. ✔ Ichimoku (9/26/52/26) → Above/Below cloud + Tenkan/Kijun order ✔ MACD (12/26/9) → Histogram slope & zero-line alignment ✔ RSI / MFI (14) → Momentum ≥60 bull / ≤40 bear ✔ ADX (14) → Strength ≥20 and rising ✔ EMA Alignment (9/21/55/233) (optional) → Stack order confirms trend engine ✔ ATR Slope (14) (optional) → Expanding volatility filter 📊 Score Line (0–6 scale) At the bottom of the HUD you’ll see a colored score plot: 🟢 5–6 = A-Grade Trend Environment → strongest continuation regimes 🟡 3–4 = Mixed Bag → wait for clarity 🔴 0–2 = Fail Zone → stay flat, no trend support 🎯 How to use it Scan the HUD first → wait until Score ≥5 and most rows are ✔ green. Then check Overlay labels/arrows → only take signals while HUD is green (trend environment confirmed). Adjust strictness with minChecks: • Normal Days → Score ≥4 acceptable (partial TP style). • Trend Days → Demand Score ≥5 (stacked, high-conviction runs). 🧩 Best Practices ⏰ Focus on London & NY sessions (HUD grays out off-hours). 🔄 Keep the HUD & Overlay in sync (same EMA/ATR/session settings). ⚡ Use the HUD as your filter, Overlay as your trigger → keeps you aligned with your trading plan and risk model.
Pine Script®指標
由Tradebeast911提供
PCCE + False Breakout DetectorPCCE + False Breakout Detector Type: Invite‑Only Indicator (closed source) Purpose: Identify volatility compression (“coil”) and the first expansion after it, while filtering failed breakouts (bull/bear traps). What it does — in plain language This tool unifies two complementary behaviours that often appear back‑to‑back around strong moves: 1. Price Coil Compression & Expansion (PCCE) – finds compact ranges created by shrinking candle bodies, wick dominance, and contracting range relative to recent history. When price expands out of that coil with strength, it prints a Burst↑ / Burst↓ label. 2. False Breakout Detection – monitors recent swing extremes. If price closes beyond a prior high/low but re‑enters that range within a short window, it marks a trap (❌ red for failed bullish breakout, ❌ green for failed bearish breakout). Why combine them? PCCE tells you where the next move is likely brewing; the trap filter validates whether the breakout is genuine or failing. Used together they turn raw breakouts into structured, risk‑aware opportunities. How it works — concepts behind the calculations 1) Detecting “Coil” (compression) • Body contraction: Count of consecutive bars where |close-open| is decreasing within a sliding window. • Wick dominance: Average (upper wick + lower wick) / body must exceed a threshold → indecision/liquidity probing. • Relative range: Current high‑low over the window must be smaller than the average of prior windows (tight market). • Coil zone: When the above conditions align, the most recent high/low envelope defines the coil’s bounds. 2) Confirming “Burst” (expansion) A breakout through the coil high/low is only labelled when: • Body thrust: current body > moving‑average body × multiplier (large real body). • Relative volume: volume > moving‑average volume × multiplier (participation filter). • Trend alignment (optional): close vs EMA to avoid counter‑trend bursts. • Cooldown: minimum bars between signals to reduce clustering. Result: Burst↑ if closing beyond coil high with thrust; Burst↓ if closing beyond coil low with thrust. 3) Flagging failed breakouts (traps) • Track recent swing high/low from a lookback excluding the current bar. • If a bar closes beyond that swing but within N bars price closes back inside the swing range → flag a trap: • Bull trap: ❌ red above bar (break above failed) • Bear trap: ❌ green below bar (break below failed) ⸻ What you see on the chart • Coil zone: a shaded box (tight range envelope). • Burst labels: Burst↑ (triangle up) and Burst↓ (triangle down) at confirmed expansion bars. • Trap markers: ❌ red (failed bullish breakout), ❌ green (failed bearish breakout). • Alerts: “Burst Up”, “Burst Down” (fires on bar close only). ⸻ How to use it 1. Preparation : When a coil box forms, mark the zone and wait. 2. Trigger : A Burst label confirms the first expansion with thrust/volume; treat it as an entry cue only within your own plan. 3. Validation : If a ❌ trap appears shortly after a break, treat it as caution/exit info; the breakout is failing. 4. Context : Best on 15m–4H. Combine with higher‑timeframe bias, nearby S/R, and risk controls. 5. Parameters to tune : • Coil window, wick‑to‑body threshold, and range tightness • Body/volume multipliers • EMA trend filter on/off • Trap lookback and confirmation bars • Cooldown bars ⸻ Originality & usefulness • Behaviour‑first compression scoring: Coil detection blends monotonic body shrink, wick dominance, and relative range contraction—not generic bands or a single oscillator. • Two‑stage discipline: A burst is not just any break; it requires body thrust + relative volume (+ optional trend) to reduce noise. • Immediate invalidation layer: The trap filter is evaluated right after the burst context, turning breakouts into risk‑aware signals rather than blind entries. • Operator controls: Cooldown + multipliers let traders adapt the strictness to instrument/session behaviour. ⸻ Repainting & limitations • Signals are evaluated on bar close; no lookahead, no request.security() with lookahead_on. • Coil boxes while forming can update until confirmed; Burst/Trap labels do not repaint after their bar closes. • News spikes and illiquid hours can still create noise; adjust multipliers and cooldown for your market. ⸻ Disclaimer This indicator is an educational decision‑support tool, not financial advice. Markets are uncertain; past behaviour does not guarantee future results. Use with your own analysis and risk management.
Pine Script®指標
由TradeTechanalysis提供
XAUUSD Confluence Analyzer# TradingView Setup Guide - XAUUSD Confluence Indicator Configuring the Indicator Settings Once added to your chart, click the **gear icon** next to the indicator name to access settings: ### RSI Settings: - **RSI Length**: 14 (default) - **RSI Overbought**: 70 - **RSI Oversold**: 30 ### Volume Settings: - **Volume Multiplier**: 1.5 (signals high volume when 1.5x average) ### Support/Resistance Settings: - **Lookback Period**: 20 - **S/R Touch Strength**: 3 ### Key Levels (Update these based on current market): - **Key Support 1**: 3269.0 - **Key Support 2**: 3321.0 - **Key Resistance 1**: 3400.0 - **Key Resistance 2**: 3450.0 ### Fibonacci Settings: - **Fibonacci Lookback**: 100 periods Understanding the Visual Elements ### Lines and Levels: - **Green Lines**: Support levels (Key Support 1 & 2) - **Red Lines**: Resistance levels (Key Resistance 1 & 2) - **Purple/Blue/Orange Dots**: Fibonacci retracement levels (61.8%, 50%, 38.2%) ### Background Colors: - **Yellow Background**: High confluence (70+ score) - Strong signal - **Blue Background**: Moderate confluence (40-69 score) - **Gray Background**: Low confluence (<40 score) ### Signal Arrows: - **Green Triangle Up**: Buy signal (confluence score 70+ at support) - **Red Triangle Down**: Sell signal (confluence score 70+ at resistance) ### Information Table (Top Right): - **Confluence Score**: Current confluence strength (0-100) - **RSI**: Current RSI value - **Distance to Levels**: How close price is to key levels - **Volume**: Current volume status (HIGH/NORMAL) - **Signal**: Current signal (BUY/SELL/NONE) - **Strength**: Overall signal strength (STRONG/MODERATE/WEAK) Setting Up Alerts 1. **Right-click on the chart** and select "Add Alert" 2. **Choose your indicator** from the dropdown 3. **Select alert type**: - "Confluence Buy Signal" - Alerts when buy conditions met - "Confluence Sell Signal" - Alerts when sell conditions met - "High Confluence Alert" - Alerts when score reaches 70+ 4. **Configure notification method** (email, SMS, app notification) 5. **Click "Create"** ## Step 5: Additional Setup Recommendations ### Complementary Indicators to Add: 1. **Volume Profile** - Shows volume at price levels 2. **MACD** - Momentum confirmation 3. **Bollinger Bands** - Volatility and mean reversion 4. **200 EMA** - Long-term trend direction ### Chart Setup: - **Timeframe**: Daily for main signals, 4H for entries/exits - **Chart Type**: Candlesticks - **Extended Hours**: Enable for complete price action ### Watchlist Setup: Create a watchlist with: - XAUUSD (main) - DXY (Dollar Index - inverse correlation) - US10Y (Bond yields - affects gold) - SPX (Risk sentiment) Trading Rules Based on Confluence Score ### High Confluence (70+ Score): - **Entry**: Wait for score 70+ at key levels - **Stop Loss**: Below nearest support (buy) / Above nearest resistance (sell) - **Take Profit**: Next resistance level (buy) / Next support level (sell) - **Position Size**: Full position size ### Moderate Confluence (40-69 Score): - **Entry**: Wait for additional confirmation (price action, volume) - **Stop Loss**: Tighter stops - **Take Profit**: Partial targets - **Position Size**: Reduced position size ### Low Confluence (<40 Score): - **Action**: Avoid trading, wait for better setup - **Use**: Market analysis only ## Step 7: Backtesting Your Strategy 1. **Use TradingView's Strategy Tester** 2. **Convert indicator to strategy** (modify Pine Script) 3. **Test different timeframes** (4H, Daily, Weekly) 4. **Optimize parameters** based on historical performance 5. **Paper trade** before live implementation ## Step 8: Regular Maintenance ### Weekly Tasks: - Review key support/resistance levels - Update Fibonacci lookback period if needed - Check alert functionality ### Monthly Tasks: - Analyze performance metrics - Adjust key levels based on new market structure - Review and optimize parameters ## Troubleshooting Common Issues ### Indicator Not Loading: - Check Pine Script syntax errors - Ensure all input values are valid - Try reducing lookback periods if memory issues ### Signals Not Appearing: - Verify key levels are current - Check if confluence score is reaching threshold - Ensure all conditions are met simultaneously ### Too Many/Few Signals: - Adjust confluence score threshold - Modify RSI overbought/oversold levels - Change volume multiplier sensitivity ## Mobile App Usage The indicator works on TradingView mobile app: 1. **Sync your account** to access custom indicators 2. **Alerts will work** on mobile notifications 3. **Table display** may be smaller but functional 4. **All signals and levels** display correctly ## Pro Tips 1. **Combine with multiple timeframes**: Use daily for signals, 4H for entries 2. **Watch news events**: Gold is sensitive to economic data 3. **Monitor correlations**: Watch DXY, yields, and equity markets 4. **Use confluence with price action**: Look for engulfing patterns, pin bars at levels 5. **Risk management**: Never risk more than 1-2% per trade This indicator automates the confluence analysis we identified and provides clear visual signals for XAUUSD trading opportunities.
Pine Script®指標
由TroutyTrades提供
Volume Profile – VPOC/VAH/VAL [VERY GREEN] [STRATEGY]The Volume Profile Only – VPOC/VAH/VAL Strategy is a trading model that builds everything around a rolling, algorithmic volume profile. It highlights the market’s most significant levels and uses them to drive both reversion and breakout entries. Backtest results on a 5m timeframe with default inputs over TradingView's entire history yield a vast majority of green over 26,000 trades with a 1:1 RR. ----- Volume Profile Calculation – dynamically reconstructs the histogram over a user-defined lookback with adjustable bin count and optional smoothing. Point of Control (VPOC) – identifies the single price level with the highest traded volume and uses it for plotting and exit logic. Value Area (VAH & VAL) – defines the zone containing a configurable percentage of total traded volume, forming the basis for both reversion and breakout strategies. Reversion Mode – enters trades when price moves outside the value area and then crosses back in, with optional take profit at VPOC or fixed risk/reward targets. Breakout Mode – enters trades after a set number of closes confirm acceptance above VAH or below VAL, capturing continuation behavior. HVN/LVN Markers – optionally plots high-volume and low-volume nodes as dotted lines to add context and confluence. Risk Management – fully parameterized stops (in ticks) and risk/reward ratios, with all exits managed programmatically for accurate backtesting. Visuals – plots VPOC, VAH, VAL, and optional HVN/LVN levels directly on the chart, with an optional debug label showing the current levels and mode. This strategy is designed for testing and educational purposes, demonstrating how volume profile levels can be translated into systematic trade logic.
Pine Script®策略
由mqsxn提供
VWAP Bull/Bear KPL Navigator# Day Trading GPS VWAP Bull/Bear KPL Navigator ## Overview The VWAP Bull/Bear KPL Navigator is an advanced market analysis tool that combines volume-weighted price analysis with standard deviation bands and daily projection levels to identify market conditions and potential trading opportunities. It features automatic session detection and its VWAP anchoring automatically adjusts to different market types (Stocks, ETFS, ADRS, Forex Currency Pairs, Forex CFDS, Futures, Cryptocurrencies, Indexes) for optimal performance. ## Key Components ### VWAP Bull/Bear KPL Line (Yellow) - Acts as the primary reference point for market direction - Adapts automatically to different market conditions and sessions - Provides a dynamic measure of average price weighted by volume ### Standard Deviation Bands 1. **First Standard Deviation (Green)** - Represents normal market volatility range - Most common area for price movement - Useful for identifying potential support/resistance 2. **Second Standard Deviation (Blue)** - Indicates increased volatility - Potential reversal zones - Less common price territory 3. **Third Standard Deviation (Red)** - Represents extreme market conditions - Rare price territory - Strong potential for mean reversion ### Daily Projection Levels - Projects potential price levels based on daily range - Automatically calculates levels using Average Daily Range (ADR) - Displays up to 10 levels above and 10 levels below the daily open to accommodate low, moderate and extreme volatility conditions - Each level can display: - Level number (L1, L2, etc.) - Level Price - Hit count tracking - Probability percentage ### Dashboard - Displays real-time values for: - Current date/time and symbol - Price and VWAP Bull/Bear KPL level - All standard deviation band levels - Customizable position and appearance ## Trading Applications ### Market Analysis 1. **Trend Direction**: - Price above VWAP Bull/Bear KPL line suggests bullish bias - Price below VWAP Bull/Bear KPL line suggests bearish bias - VWAP Bull/Bear KPL line slope indicates trend strength 2. **Volatility Assessment**: - Distance between bands shows market volatility - Expanding bands indicate increasing volatility - Contracting bands suggest decreasing volatility 3. **Mean Reversion Opportunities**: - Price moves to outer bands often return to VWAP Bull/Bear KPL - Stronger reversal potential at higher deviation bands - Band touches can signal potential entry points 4. **Daily Level Analysis**: - Levels help understand expected daily price ranges - Higher probability levels represent common price zones - Lower probability levels suggest potential reversal zones - Hit counts and probabilities are more accurate on higher timeframes ### Session Management 1. **Automatic Reset**: - Automatically resets anchored VWAP for different market types each trading day - Maintains accuracy across different sessions and market types 2. **Market Type VWAP Anchoring Optimization**: - Automatically adjusts VWAP anchoring for optimal performance on different market types (Stocks, ETFS, ADRS, Forex Currency Pairs, Forex CFDS, Futures, Cryptocurrencies, Indexes) ## Best Practices 1. **Band Usage**: - Use closer bands (1σ) for conservative entries - Middle bands (2σ) for normal trading conditions - Outer bands (3σ) for extreme conditions - Consider band width for volatility assessment 2. **Signal Confirmation**: - Look for price acceptance/rejection at bands - Consider multiple timeframe analysis - Watch for divergence between price and KPL 3. **Risk Management**: - Wider stops in higher volatility conditions - Tighter stops when bands are closer together - Consider reducing position size at extreme bands 4. **Daily Level Usage**: - Low probability levels suggest increased reversal potential: When price reaches levels with low historical hit rates (typically below 30%), this indicates an extreme move that often precedes a reversal. These zones represent price areas where the market has rarely sustained movement beyond. - Consider taking profits as price approaches low probability levels: As your position moves into these extreme zones, it's prudent to begin scaling out or fully exiting your trades. The statistical rarity of these levels maintaining suggests increased risk of reversal. - Look for reversal opportunities near low probability zones: These areas often present high-probability counter-trend trading opportunities. The market's tendency to mean-revert from extreme levels can provide favorable risk/reward setups for reversal trades. - Use higher timeframes for more reliable probability data: Daily and higher timeframe probability calculations offer more statistically significant data due to reduced noise. This provides more reliable signals compared to shorter timeframe probability calculations. - Consider exiting positions near extreme probability levels: When price reaches levels with very low probability scores (15% or less), this suggests an overextended move. These extreme zones often precede sharp reversals and increased volatility. - Look for counter-trend entries near low probability zones: These areas can provide excellent opportunities for mean reversion trades. The statistical improbability of sustained movement beyond these levels often results in profitable counter-trend positions when combined with proper risk management. ## Settings Guidelines ### Line Settings - VWAP Bull/Bear KPL Line: Adjust color and width for visibility - Standard Deviation Bands: Customize appearance for each level - Consider reducing opacity for clearer price action viewing ### Dashboard Configuration - Position: Choose based on chart layout - Text Size: Adjust for readability - Colors: Customize for personal preference - Background: Modify transparency as needed ## Disclaimer and Risk Warning Trading financial markets carries substantial risk of loss and is not suitable for every investor. The performance of the VWAP Bull/Bear KPL Navigator indicator is not guaranteed and past performance does not indicate future results. The signals and information provided by this indicator should not be used as the sole basis for any investment decision. Users of this indicator should: - Understand that no indicator can predict market movements with certainty - Never risk more capital than they can afford to lose - Develop and follow a comprehensive trading plan and risk management strategy - Consider seeking professional financial advice before trading - Be aware that market conditions can change rapidly and without warning - Understand that technical analysis tools are supplementary and not predictive - Know that successful trading requires education, practice, and proper risk management The creators and distributors of the Dynamic VWAP Bull/Bear KPL Navigator: - Do not guarantee any specific trading results or profits - Are not responsible for any trading decisions made using this indicator - Make no claims about the indicator's future performance - Cannot be held liable for any losses incurred while using this tool By using the VWAP Bull/Bear KPL Navigator, you acknowledge that you understand these risks and accept full responsibility for your trading decisions.
Pine Script®指標
由DayTradingGPS提供
Vantage-XVANTAGE-X – The Market. Decoded. Your vantage point between bull & bear — clarity, precision, and high-probability trading signals. VANTAGE-X is a high-probability trading system designed to cut through the noise and deliver clarity at a glance. 🔹 What It Does • EMA 20 (1H), EMA 50 (4H), EMA 200 (chart timeframe) → Instant bullish/bearish signals • VWAP → Bullish/Bearish/Neutral, based on last 5 candles for precision • Daily Bias → Bullish or Bearish without switching charts • Chop Filter → Detects if market is trending or choppy (last 10 candles) • Works across all assets on TradingView — futures, forex, stocks, crypto, options 🔹 Why Traders Use It • Eliminates chart clutter and analysis paralysis • No more flipping timeframes — dashboard updates automatically • Clear signals = faster decisions, cleaner trades 🚨 Subscription Access Only – Invite-Only Script This indicator is available exclusively to subscribed members of VANTAGE-X. Access is tied to your TradingView username and managed manually by our team. 👉 Website coming soon
Pine Script®指標
由vismorc8640提供
Nexus Trend OS - Confluence Dashboard v1.2 by IndicatorEdgeStop trading blind with single indicators. The Nexus Trend OS is a professional-grade, institutional-style dashboard that acts as the central "Operating System" for your trend analysis. Specifically designed for the dynamic crypto market, it synthesizes over a dozen critical data points—from multi-timeframe technicals to your own fundamental research—into a single, actionable Confluence Score. This isn't just an indicator; it's a decision-support framework that provides a complete, 360-degree view of the market, helping you trade with clarity and conviction. Key Features ("10/10" Upgrades) 🏆 Dynamic Confluence Score: The heart of the OS. Instead of a simple "bull" or "bear" signal, the script calculates a numerical score based on the alignment of all factors. A high positive score indicates strong bullish confluence; a high negative score signals strong bearish confluence. 🎯 Actionable On-Candle Signals: Get clear "BULL" and "BEAR" signals plotted directly on your chart the moment the Confluence Score crosses your custom-defined threshold. 📐 Robust Market Structure Engine: Forget simplistic single-bar analysis. The OS uses a proper swing-point (pivot) engine to identify true market structure, telling you if the market is making Higher Highs/Higher Lows (Uptrend) or Lower Lows/Lower Highs (Downtrend). 💯 100% Non-Repainting: All multi-timeframe data is fetched from confirmed historical bars, providing a stable and reliable dashboard that you can trust for your analysis and alerts. 🧠 Hybrid Analysis Model: This is what sets Nexus OS apart. It seamlessly blends quantitative technical data with your own qualitative research. Manually input your bias on: 💡 Fundamentals ⛓️ On-Chain Data 💬 Market Sentiment 🌐 Macro/Regulatory News ...and watch it instantly update your overall Confluence Score! 🔧 Fully Modular & Customizable Dashboard: You are in complete control. Use the settings to show or hide any technical indicator from the dashboard, creating a clean workspace focused only on the data you care about. 🤖 Automation-Ready Alerts: Create alerts that trigger when the Confluence Score crosses your bullish or bearish threshold, perfect for staying on top of the market or integrating with third-party automation tools. How to Use the Nexus Trend OS Assess the Confluence Score: Your primary guide is the score at the top of the dashboard. A score of +5 or higher suggests strong bullish alignment, while -5 or lower suggests strong bearish alignment. Scores in between indicate neutrality or chop. Wait for Signals: Use the on-candle "BULL" / "BEAR" signals as your primary call to action. These signals appear only when a significant shift in confluence occurs. Use as a Confirmation Tool: The best way to use this OS is to confirm your own trading ideas. For example, if you identify a key support level and then see a "BULL" signal appear as price tests it, your trade has a much higher degree of confluence. Update Your External Research: Regularly update the "External Market Factors" in the settings. If a major bullish news event occurs, set "Fundamental Analysis" to "Bullish" and see how it impacts the overall score. Disclaimer: This tool is for educational and analytical purposes only. All trading involves substantial risk. The author, IndicatorEdge By SG, is not liable for any financial losses incurred. Past performance is not indicative of future results. Please trade responsibly.
Pine Script®指標
由IndicatorEdge提供
Auto S/R Zones — Pivots + MA Bands + Trendline Channels (No ExtWhat it is An auto-updating Support/Resistance indicator that builds zones from: Swing Pivots: clusters historical highs/lows into meaningful zones. Dynamic MA Bands: 20/50/100/200 SMA with ATR-based bands that often act as S/R. Trendline Channels: lightweight bands projected from the latest lower-highs (resistance) and higher-lows (support). No external feeds needed. Works on any symbol/timeframe, designed with crypto intraday (e.g., BTCUSDT 5–15m) in mind. How it works (tl;dr): Detects pivot highs/lows (left/right = 5 by default). Clusters nearby pivots using either ATR distance or % of price → forms zone centers. Builds zone width from ATR (or %) and draws filled bands that extend right. Plots 4 SMAs (20/50/100/200) and paints thin ATR bands around them (potential dynamic S/R). Finds recent lower-high and higher-low structures and draws trendline bands with ATR padding. Inputs you can tune Pivot Left/Right: sensitivity of swing detection. Lower = more zones (noisier), higher = fewer/stronger zones. Cluster Merge Distance: choose ATR-based or %-price merging; higher values = fewer but stronger zones. Zone Width: ATR-based or %-price half-width. Max Zones: cap how many zones show above/below current price. MA Bands: toggle on/off; change SMA lengths; adjust ATR half-width. Trendline Bands: toggle on/off; adjust ATR padding. Suggested starting points Scalping (5–15m): Pivot L/R = 4–6 Merge = ATR × 0.5–0.7 Zone half-width = ATR × 0.25–0.4 MAs = 20/50/100/200, MA band = ATR × 0.2–0.3 Swing (1h–4h): Pivot L/R = 6–10 Merge = ATR × 0.8–1.2 Zone half-width = ATR × 0.35–0.6 How to use Look for reaction at the nearest zone(s): rejection, absorption, or clean break & retest. Use MA bands for dynamic S/R in trend; trendline bands help frame channels. Combine with your entry logic (momentum/structure) and clear risk management. Notes & limitations Indicator only (no orders). No repainting beyond the inherent pivot lookback. The first few bars may show fewer zones until pivots accumulate. Trendline bands are intentionally simple to stay light and real-time. Changelog v1.0: Initial public release (no external levels; defensive logic to avoid out-of-bounds on first bars). Disclaimer For educational purposes only. Not financial advice. Always test on your instrument/timeframe and use appropriate risk controls.
Pine Script®指標
由fts4sure提供
Fear index by Clarity ChartsFear Index – Market Sentiment Strength Meter The Fear Index is a unique, custom-built indicator designed to visualize market sentiment shifts by highlighting periods of fear (red) and confidence (green) directly on your chart. Unlike traditional oscillators, this tool combines price action dynamics with volume intensity to detect when participants are aggressively selling or confidently buying. How to Use: Red spikes indicate rising fear, panic, or heavy selling pressure – potential trend reversals or breakdown signals. Green spikes highlight confidence, strength, or accumulation – signaling possible recovery or continuation. Best used with trend analysis, support/resistance zones, and volume confirmation for high-probability setups. Why this is different: Not a copy of any existing indicator – this is a brand-new formula. Helps you anticipate market mood before major price swings. Works across multiple timeframes and instruments (indices, stocks, crypto, forex). Pro Tip: Combine this with EMA/Trend filters for powerful trade entries and exits. Support the Work If you find this indicator valuable, please boost by like, comment, and share it so I can continue creating more powerful and innovative tools for traders like you. Your support keeps this research alive!
Pine Script®指標
由Clarity_Charts提供
🐋 Whale CareWhale Care 🐋 Indicator for detecting short signals based on the activity of large players ("whales"). Specifically designed for 5 to 15-minute timeframes. Key Features 🎯 Clear visual signals - orange labels on the chart 📊 Signal strength histogram - measures the power of each signal ⚡ Instant alerts - notifications about large player activity 🏦 Dual filter - analyzes both banking and speculative capital Optimal Usage Timeframes: 5M, 10M, 15M Markets: Stocks, forex, cryptocurrencies Strategy: Short positions on signal appearance Signal System Entry: Orange "WHALE CARE" labels at price peaks Confirmation: High histogram columns Filter: Increased market volatility Default Settings Optimized for short-term trading: Banker RSI: period 50 Hot Money: period 40 Volatility threshold: 4.0 Trader Advantages Fast detection of large orders Minimal signal delay Simple visual interpretation Customizable for individual trading style A tool for trading decisions, not investment advice
Pine Script®指標
由Zdorman提供
Consecutive Candle Body Expansion with VolumeConsecutive Candle Body Expansion with Volume This tool is designed to help traders identify moments of strong directional momentum in the market. It highlights potential buy and sell opportunities by combining candlestick behavior with volume confirmation. ✨ Key Features Detects when the market shows consistent momentum in one direction. Filters signals with volume confirmation, avoiding low-activity noise. Highlights possible continuation signals for both bullish and bearish moves. Works on any asset and any timeframe — from scalping to swing trading. 🛠 How to Use Green labels suggest potential buying opportunities. Red labels suggest potential selling opportunities. Best used in combination with your own risk management rules and other indicators (like support/resistance or moving averages). ⚠️ Note: This is not financial advice. Always backtest before applying in live trading.
Pine Script®指標
由Delta-Ex-research提供
1