立即開始

圖表形態

Daily Gap + Pre-Market Zones + EMA 9Intraday Gap Zones & Pre-Market Range Description Concept & Overview This indicator is designed for intraday traders (Indices and Equities) who focus on structural price action at the market open. The script automates the drawing of two critical liquidity zones: The Gap Zone: The empty space between the previous Regular Trading Hours (RTH) Close and the current day's Open. The Pre-Market Range: The High and Low established between 04:00 AM and 09:30 AM ET. By visualizing these levels automatically, traders can instantly see if the market is opening inside value or gapping out of range. It also includes an EMA 9 to assist with trend determination. Key Features Automated Gap Visualization: Automatically draws a box from yesterday's 4:00 PM Close to today's 9:30 AM Open. This box extends to the right, creating a visual reference for potential "Gap Fill" plays. Pre-Market High/Low: Captures the full range of the pre-market session. Once the market opens, these levels are locked and extended as key Support/Resistance levels for the day. Timezone Intelligence: The script is hardcoded to America/New_York time. This ensures accurate level detection regardless of your local timezone or chart settings. Smart Alerts (Context Aware): Unlike standard EMA alerts, this script utilizes specific logic. Alerts are only triggered if an EMA crossover occurs inside the Gap Zone. This filters out noise and focuses on reversals or continuations specifically within the gap. How it Works Session Tracking: The script distinguishes between Pre-Market (04:00-09:30 ET) and RTH (09:30-16:00 ET). Level Locking: At 09:30 AM ET, the script takes a snapshot of the pre-market high/low and the calculated gap. It draws the boxes and locks them for the remainder of the trading day. EMA Filter: A standard 9-period EMA runs continuously. Signal Generation: If price is strictly trading inside the Gap Box during RTH, and it crosses the EMA 9, a signal is generated. Settings & Customization Gap Zone Color: Customize the color and transparency of the Gap box. Pre-Market Zone Color: Customize the look of the pre-market range. EMA Length: Adjust the moving average period (Default: 9). Best Practices Timeframe: Best used on intraday timeframes (1m, 3m, 5m, 15m). Markets: Optimized for US Equities and Indices (SPY, QQQ, NVDA, TSLA, etc.) due to the specific RTH logic. Disclaimer & Risk Warning For Educational Purposes Only This script and the indicators generated are for educational and informational purposes only. They do not constitute financial advice, investment recommendations, or a solicitation to buy or sell any securities. Risk Warning Trading financial markets involves a high level of risk and may not be suitable for all investors. You should be aware of all the risks associated with trading and seek advice from an independent financial advisor if you have any doubts. No Guarantee: Past performance of any trading system or methodology is not necessarily indicative of future results. Software Limitations: While every effort has been made to ensure the accuracy of the calculations in this script, technology failures, data feed errors, or bugs may occur. Always verify levels manually before executing trades. Usage By using this script, you acknowledge that you are solely responsible for your own trading decisions and results.
Pine Script®指標
由Awesome_Trader_666提供
SMC + VP Pro with POC Confluence [MR.M] V.2ยำรวมมิตร จาก AI เอาไปใช้กันนะครับ รวยแล้ว กดใจให้ด้วยนะครับ MM ให้ดี ไม่มีเครื่องมือใดชนะ 100 % อย่าขาดทุนนะ 😂😂😂💕💕💕 นี่เป็นการเผยแพร่สคริป ครั้งแรก SMC + VP Pro with POC Confluence + RSI Divergence = Volume Profile (POC, VAH, VAL) + Smart Money Concepts (FVG, OTE, BOS, Liquidity) + POC Confluence Detection (12 zones) + RSI Divergence (Regular + Hidden) + Higher Timeframe Analysis + Trading Signals (Conservative mode) + Risk Management (Auto SL/TP) + Information Dashboard → All-in-One Professional Trading System → Win Rate: 70-90% → Suitable for: Conservative to Balanced traders → Best on: H1, H4 timeframes ถ้ามันรก ก็ปรับเอาเองนะครับ ถ้ามีที่ต้องปรับปรุง แจ้งด้วยนะครับ V.2 ปรับปรุงเพียงเล็กน้อย คือ ปรับ✅ ควรเห็น VAH VAL Label เดียว (ราคาล่าสุด) จากที่ค้างไม่ลบอัตโนมัติ
Pine Script®指標
由kkk_mooy_in_FB提供
SMC + VP Pro with POC Confluence [MR.M]ยำรวมมิตร จาก AI เอาไปใช้กันนะครับ รวยแล้ว กดใจให้ด้วยนะครับ MM ให้ดี ไม่มีเครื่องมือใดชนะ 100 % อย่าขาดทุนนะ 😂😂😂💕💕💕 นี่เป็นการเผยแพร่สคริป ครั้งแรก SMC + VP Pro with POC Confluence + RSI Divergence = Volume Profile (POC, VAH, VAL) + Smart Money Concepts (FVG, OTE, BOS, Liquidity) + POC Confluence Detection (12 zones) + RSI Divergence (Regular + Hidden) + Higher Timeframe Analysis + Trading Signals (Conservative mode) + Risk Management (Auto SL/TP) + Information Dashboard → All-in-One Professional Trading System → Win Rate: 70-90% → Suitable for: Conservative to Balanced traders → Best on: H1, H4 timeframes ถ้ามันรก ก็ปรับเอาเองนะครับ ถ้ามีที่ต้องปรับปรุง แจ้งด้วยนะครับ
Pine Script®指標
由kkk_mooy_in_FB提供
PEAKPROFIT MARKOUTThe PeakProfit indicator is a price-action–based day trading system designed to help traders identify high-probability entries, clear bias, and key reaction zones during the trading session. It focuses on: Market structure & trend direction Key liquidity and institutional levels High-confidence entry confirmations Clean risk-to-reward trade setups The indicator removes noise from the chart and highlights where smart money is most likely active, allowing traders to stop guessing and start executing with confidence. It works best for day trading ES, NQ, and major indices, but can be applied to any liquid market. Built for traders who want clarity, discipline, and consistency, not random signals.
Pine Script®指標
由THE-BANKERR提供
SMART Algo Mode plus Session (Instrument Aware PLUS Warnings)It will color background red, yellow or green for each one of the instruments MGC, MNQ, MYM and MES depending on the hour of the day and the mode (scalp vs swing) See table below SCALP MODE (ET) MNQ / MES MYM MGC 08:20–09:30 GREEN YELLOW GREEN 09:30–11:00 GREEN GREEN GREEN 11:00–13:30 RED RED RED 13:30–15:00 YELLOW YELLOW YELLOW 15:00–16:00 YELLOW GREEN RED After 16:00 RED RED RED SWING MODE (ET) MNQ / MES MYM MGC 08:20–09:30 YELLOW YELLOW YELLOW 09:30–11:00 GREEN GREEN YELLOW 11:00–13:30 YELLOW YELLOW YELLOW 13:30–15:00 GREEN GREEN GREEN 15:00–16:00 GREEN GREEN RED After 16:00 RED RED
Pine Script®指標
由Successful-Maestro提供
Auto Session Fib (Daily / Weekly)Session-Anchored Fibonacci (RTH Only) Automatically tracks the Regular Trading Hours session (09:30–16:00). Fibonacci levels are built only from session high and low, not overnight noise. Levels dynamically update throughout the session and anchor precisely at 09:30. Session levels plotted: High / Low 50% retracement 61.8%, 78.6%, 88.6% (bullish and bearish interpretations) These levels are intended for intraday execution, not bias. 2️⃣ Previous Week Fibonacci (Market Context) Displays previous week High, Low, and Fibonacci retracements. Lines are confined strictly to the prior week (no overlap into the current week). Levels are shown in a faint gray to distinguish context from execution. Each key fib level includes descriptive labels, not just numbers: 61.8% → Golden Zone anchor 78.6% → Deep pullback / last defense 88.6% → Trend failure / trap zone These are decision-framing levels, designed to help identify where trends either hold or fail. 3️⃣ Previous Day Extension Zones (Expansion Targets) Calculates previous day range and projects: +1.618 / +1.786 −1.618 / −1.786 Draws filled zones (no borders) between: 1.618 ↔ 1.786 −1.618 ↔ −1.786 Boxes extend only across the current RTH session. These zones represent expansion / exhaustion areas, not reversal signals by themselves. 4️⃣ RSI Turn Signals (Clean, Non-Repainting) Uses a standard RSI, with: Adjustable length Adjustable overbought / oversold levels Optional independent RSI timeframe (can differ from chart TF) Signals trigger only on a turn, not while RSI remains extreme: Buy: RSI crosses up through oversold Sell: RSI crosses down through overbought This indicator is built to answer three questions: Where am I relative to important structure? Is price extended or mean-reverting? Is there a confirmed momentum turn?
Pine Script®指標
由Warner_Bear提供
GK ZeroLag BOSGK Zero-lag BOS is clean, non repainting institutional trend and structure indicator built specifically for precision entries. It combines Zero-lag EMA ZELMA with ATR volatility bands to define true trend direction, then confirms entries using break of structure BOS logic. signals only print once per trend eliminating noise, chop. KEY FEATURES Zero lag EMA trend detection length=70 ATR band volatility filter, BOS confirmation using recent structure highs/lows. one GK BUY / GK SELL per trend fully non repainting and bar close confirmed optimised for XAUUSD
Pine Script®指標
由hgavin780提供
ICT HTF/BIASICT HTF/BIAS — Full Guide What this indicator does ICT HTF/BIAS plots multi-timeframe ICT PD Arrays (FVGs + Order Blocks) and provides a compact bias table that helps you quickly determine directional context across your selected timeframes. It is designed to stay simple, readable, and ICT-based, while avoiding misleading signals. Key features 1) ICT PD Arrays included FVG (Fair Value Gap): classic ICT 3-candle imbalance (gap). Order Blocks (OB): detected via BOS logic + pivot structure, then searching back for the last opposite candle as the OB anchor. 2) HTF confirmed zones (non-misleading behavior) Zones are added only on the HTF close (confirmed higher timeframe bar). This avoids “in-progress HTF candle” noise and reduces false/temporary zones. 3) SHOW vs CALC (decoupled by design) Each TF has two independent depth controls: Max SHOW = how many zones you want to draw on the chart (keep your chart clean). Max CALC = how many zones the table/bias is allowed to analyze (keep your bias logic robust). This prevents a common problem: changing how many boxes you display changes your bias output. In this script, your bias can remain stable even if you hide most boxes. 4) Compact Bias Table (fast read) The table shows: FVG status: IN / OUT / N/A OB status: IN / OUT / N/A BIAS: ↑ / ↓ / “-” GLOBAL bias: weighted across TF1..TF4 How to read the bias Per-Timeframe Bias rules (ICT-based, simple) For each timeframe: If price is IN an OB (within CALC depth) → bias = OB direction Else if price is IN a FVG (within CALC depth) → bias = FVG direction Else fallback to the most recent direction (OB preferred, otherwise FVG) GLOBAL bias (weighted) The GLOBAL row uses a weighted sum: TF1 weight = 1 TF2 weight = 2 TF3 weight = 3 TF4 weight = 4 Score > 0 → bullish global bias Score < 0 → bearish global bias Score = 0 → neutral Chart TF “Guard” (prevents false LTF readings) TradingView has limitations when requesting very low TF data from a much higher chart timeframe. To avoid showing incorrect LTF (1m/5m/15m) statuses when you’re on a high chart TF, the script can display a small warning banner and treat certain LTF rows as N/A when appropriate. Purpose: never show false information. Recommended usage (most user friendly) Step 1 — Choose your “Entry TF” As a rule of thumb (ICT): The lowest TF in your set should match your entry timeframe, or be close to it. Examples: Intraday / Scalping TF1=1m, TF2=5m, TF3=15m, TF4=1H (Use chart TF 1m–15m for best LTF accuracy.) Higher timeframe trading TF1=1H, TF2=4H, TF3=1D, TF4=1W (Then you naturally don’t care about 1m/5m.) Step 2 — Keep your chart clean with SHOW vs CALC A practical approach: Max SHOW: 1–2 (clean chart) Max CALC: 3–10 (more stable bias/table logic) Main settings (quick explanation) Timeframes (Rows) Enable TFx: enable/disable each row timeframe Show Boxes TFx: show/hide zones for that timeframe Max SHOW / Max CALC Max SHOW FVG / OB: visual draw limit Max CALC FVG / OB: depth used by table and bias Box Width (Per TF) HTF bars: width scales by HTF size Chart bars: fixed width in chart bars OB Logic Pivot length (BOS): higher = stricter / fewer OBs OB lookback: how many HTF bars to search for the OB anchor candle Notes / limitations This is a context + confluence tool, not a “signal generator.” LTF accuracy depends on chart TF; the Guard exists specifically to prevent misleading outputs. One-line summary ICT HTF/BIAS: multi-TF ICT PD Arrays + a clean bias table with SHOW vs CALC separation, so you can keep charts minimal while keeping bias logic consistent.
Pine Script®指標
由GabFX31提供
Pro Scalper MTF Elite Strategy v1.0.0 Pro Scalper MTF Elite Strategy v1.0.0 What is this script? This is an advanced, institutional-grade multi-timeframe (MTF) scalping and swing trading strategy for TradingView. It integrates multiple professional trading concepts—including Smart Money Concepts (SMC/SMT), price action, trend, momentum, and volume analysis—into a single, easy-to-use tool. The script is designed for traders who want robust, rules-based entries and exits, with built-in risk management and dynamic position sizing. Key Concepts Integrated Smart Money Concepts (SMC/SMT): Includes liquidity sweeps, order blocks, fair value gaps (FVG), and market structure breaks (MSB). Price Action: Detects swing highs/lows, candle patterns, and support/resistance zones. Trend Analysis: Uses EMAs, VWAP, and higher timeframe trend confirmation. Momentum: Incorporates MACD and RSI for momentum filtering. Volume : Identifies volume spikes for additional confluence. Multi-Factor Confluence: Signals are generated only when multiple factors align, increasing reliability and reducing false signals. How does it work? - The strategy continuously scans for confluence between SMC/SMT signals, price action, trend, momentum, and volume. - Each factor is scored, and only high-confluence setups trigger trade signals. - Risk management is fully automated: you set your risk per trade, and the script calculates stop loss, take profits, and position size. - Advanced features include trailing stops, breakeven logic, dynamic targets, and adaptive filters for different market regimes. How to use 1. Add the script to your chart. 2. Adjust settings in the Inputs panel: - By default, liquidity zones and support/resistance are OFF for a clean chart. Enable “Show Liquidity Zones (By TF)” and “Show S/R Zones” in the Visuals section to see SMT/SMC features. - Set your account size and risk % for proper position sizing. - Choose your preferred risk management and signal filtering options. 3. **Look for BUY/SELL labels on the chart.** - These indicate high-confluence trade entries. - The script will plot stop loss and take profit levels. 4. **Use the built-in strategy tester to review historical performance.** 5. **Set up alerts:** See below for details. Features & Settings Explained - Risk Management : Fixed % risk per trade, dynamic position sizing, trailing stops, breakeven, and adaptive targets. - Signal Logic: Multi-factor scoring, cluster confluence, aggressive mode, candle color filter, and high conviction options. - Advanced Filters: Bias gate, ambiguity skip, cooldown, adaptive stop modes, dynamic regime adjustment. - Session & Volatility : Session filter, volatility gate, and dynamic position sizing. - Visuals: All major overlays (liquidity, S/R, order blocks, FVGs, etc.) are OFF by default for clarity. Enable as needed in the Visuals section. - Dashboard (Debug Panel): Built-in dashboard displays key signal metrics, scores, cluster counts, regime status, and trigger states directly on the chart. Enable it in the Visuals section by setting “Debug Panel Mode” to “Lite” or “Extended” and choose its position with “Debug Panel Position.” - **Performance Tweaks:** Light MTF mode, max boxes/labels, and more. How to enable SMT/SMC features - Enable “Show Liquidity Zones (By TF)” for liquidity zones (SMT/SMC). - Enable “Show S/R Zones” for support/resistance. - Enable “Show Order Blocks” and “Show FVG” for order block and fair value gap visualization. How to set alerts (Strategy Script) On TradingView, strategy scripts do not allow you to select specific conditions like “Entry Buy” or “Entry Sell” in the alert dialog. Instead, you can only set a single alert for the entire strategy. Here’s how to do it: 1. Add the strategy to your chart. 2. Click the “Add Alert” (clock) icon at the top of TradingView. 3. In the alert dialog, select the strategy name as the condition (you will not see separate options for Entry Buy or Entry Sell). 4. The alert will trigger whenever the script generates a new buy or sell signal (as defined by the alert() function in the script). 5. Set your preferred alert actions (popup, email, webhook, etc.) and click “Create”. Note: If you want separate alerts for buy and sell signals, you would need to use a companion indicator version of the script. What strategy is this? How does it help? This is a multi-factor, multi-timeframe confluence strategy. It helps traders by: - Automating complex SMC/SMT and price action analysis. - Managing risk and position size for you. - Providing clear, actionable trade signals only when multiple factors align. - Adapting to changing market regimes (trend/chop/volatility). - Reducing emotional trading and overtrading. Timeframes - Works best on 5m, 15m, 30m, and 1H charts. - Can be used on higher timeframes for swing trading. - Lower timeframes (1m, 3m) may be noisier. Does it repaint? - The script is designed to avoid repainting. Signals are generated using confirmed bar data. - Optional “Repaint Audit” mode is available for testing. - Visual overlays (zones, FVGs, etc.) may update as new bars form, but trade signals do not repaint. How long do signals show? - Signals remain on the chart as long as the trade is active or until the next signal. - Visual zones fade after a set number of bars (configurable). --- Supplemental Information Author - Script by lava_javaforum (Institutional Enhancement Strategy Variant). - For support, contact via TradingView or the invite-only group. Risk Management & Position Sizing - All trades use fixed % risk per trade. - Position size is calculated automatically. - Dynamic sizing increases with higher conviction. Track Record - This is a strategy script with built-in backtesting. - Past performance is shown in the TradingView strategy tester. - No guarantee of future results; always forward-test before live trading. Markets - Designed for stocks, indices, futures, and options. - Works on any liquid market and timeframe. Leverage - The script does not recommend or require leverage. - Use leverage at your own risk. Backtesting - Fully backtestable in TradingView. - Use the strategy tester to review historical performance. Support - Support is available for invite-only users. - Contact the author for questions or troubleshooting. Community - You may contact other users in the invite-only group for feedback and tips. Trial - A trial period may be available for select users. Contact the author for details. --- Disclaimer This script is for educational and informational purposes only. It is NOT financial advice. Trading involves risk, and you should only trade with money you can afford to lose. Past performance does not guarantee future results. Always do your own research and consult a financial advisor if needed. --- If you have any questions or need help with settings, contact the author directly. Happy trading!
Pine Script®策略
由ProAITrader提供
3
SK System Indicator [Abusuhil]الوصف العربي اسفل الوصف الانجليزي # SK System Indicator - User Guide ## 1. Introduction The **SK System Indicator** is a comprehensive trading tool for TradingView, based on the principles outlined in the SK System book by Adel.Sheikh.Mkhanek. It is designed to identify high-probability trading setups by analyzing market structure through a unique sequence classification system. The indicator automatically detects `ABC` patterns, classifies them into four types (III, IKI, KII, KKI), and highlights key trading zones (B, BC, WCL). It provides clear, non-repainting signals for pattern completion and zone entry, along with calculated targets and stop-loss levels. --- ## 2. Core Concepts ### 2.1. ZigZag and ABC Pivots The foundation of the system is a non-repainting ZigZag indicator that identifies confirmed market pivots. These pivots are labeled as A, B, and C to form the core pattern. - **Confirmation Bars**: The indicator waits for a set number of bars (default is 2) to confirm a pivot, ensuring signals are stable and do not repaint. ### 2.2. Sequence Classification Each `ABC` leg is classified as either **Impulsive (I)** or **Corrective (K)** based on its momentum. This results in four primary sequence types, each with its own trading logic: | Sequence | Structure | Strength | Description | | :--- | :--- | :--- | :--- | | **KKI** | Corrective-Corrective-Impulsive | ★★★★ (Strongest) | Indicates a strong potential reversal after a period of correction. | | **KII** | Corrective-Impulsive-Impulsive | ★★★ | A common and reliable reversal pattern. | | **IKI** | Impulsive-Corrective-Impulsive | ★★ | Suggests a continuation or complex correction. | | **III** | Impulsive-Impulsive-Impulsive | ★ (Weakest) | Often indicates a strong trend that may continue. | ### 2.3. Trading Zones The indicator projects three potential trading zones based on the `ABC` pivots: - **B Zone**: A primary reversal area calculated from the A-B leg. - **BC Zone**: A secondary zone calculated from the B-C leg, often preferred for certain sequence types. - **WCL (Wave C Limit)**: The maximum expected limit for the C wave, acting as a final reversal area. --- ## 3. Features & Signals ### 3.1. Pattern Completion Signal (Yellow Triangle) - **What it is**: A yellow triangle that appears as soon as a valid SK sequence (ABC pattern) is confirmed. - **Purpose**: It serves as an early alert that a potential trading setup is forming. - **Timing**: Appears on the bar where the pattern is confirmed (after `Confirmation Bars`). - **Non-Repainting**: This signal is permanent and does not move once printed. ### 3.2. Entry Signal (Green/Red Triangle) - **What it is**: A green (buy) or red (sell) triangle that appears when the price enters one of the valid trading zones (B, BC, or WCL). - **Purpose**: This is the primary signal to consider entering a trade. - **Logic**: It appears **only once per sequence** to avoid clutter. It will not print another signal until a new, valid SK sequence is formed. - **Non-Repainting**: This signal is permanent and does not repaint. ### 3.3. Simple Mode - **Purpose**: To provide a clean, minimalist chart view for traders who prefer to focus only on signals and targets. - **Function**: When enabled, it hides all boxes (B, BC, WCL), Fibonacci levels, and ABC sequence lines/labels. - **What it shows**: Only the Pattern Completion Signal (yellow), the Entry Signal (green/red), and the Take Profit levels. ### 3.4. Historical Data - **Show Historical Signals**: Displays all past Entry Signals (up to 100) that have been generated, allowing you to visually backtest the indicator's performance. - **Show Historical SK Patterns**: Draws the last `X` number of completed SK patterns, including their ABC lines and zones. This is useful for studying how past patterns have played out. --- ## 4. Settings Guide - **General Settings**: Enable/disable the system, configure ZigZag sensitivity (`ZigZag Length`, `Confirmation Bars`), and select which sequence types to display (III, IKI, KII, KKI). - **Signal Settings**: A unified section to control the appearance of **all** signals (Entry, Pattern Completion, and Historical). - `Signal Style`: Choose between Triangle, Arrow, Circle, Diamond, or Label. - `Signal Size`: Adjust the size from Tiny to Huge. - `Buy/Sell Signal Color`: Customize the colors for buy and sell signals. - **Simple Mode**: Enable/disable the minimalist mode and toggle the visibility of the yellow Pattern Completion Signal. - **Historical Data**: Toggle the visibility of historical signals and patterns, and set the maximum number to display. - **Display Settings (SK Boxes, Fibonacci, Labels)**: Fine-tune the visibility, colors, and styles of all visual elements like trading zones, Fibonacci levels, and ABC point labels. - **Trading Logic**: Configure which trading zones (B, BC, WCL) are active for generating entry signals. - **Targets & Risk**: Toggle the visibility of Take Profit (TP1, TP2, TP3) and Stop Loss (SL) levels and customize their appearance. - **Alerts**: Enable or disable alerts for new sequence detection and zone entries. --- ## 5. How to Use 1. **Wait for a Pattern Completion Signal (Yellow Triangle)**: This is your heads-up. A yellow triangle indicates a valid SK pattern has just been confirmed. 2. **Identify the Trading Zones**: Observe the B, BC, and WCL boxes to see where the price is likely to react. 3. **Wait for an Entry Signal (Green/Red Triangle)**: Do not trade on the yellow signal alone. Wait for the price to enter a valid zone and for a green (buy) or red (sell) triangle to appear. This is your confirmation to enter. 4. **Set Targets and Stop Loss**: Use the automatically drawn TP1, TP2, TP3, and SL lines to manage your trade. 5. **Use Simple Mode for Clarity**: If the chart is too busy, enable Simple Mode to hide everything except the essential signals and targets. --- --- # مؤشر SK System - دليل المستخدم ## 1. مقدمة مؤشر **SK System** هو أداة تداول شاملة لمنصة TradingView، مبنية على المبادئ الموضحة في كتاب SK System للمؤلف عادل شيخ مكانيك. تم تصميم المؤشر لتحديد فرص التداول عالية الاحتمالية من خلال تحليل هيكل السوق باستخدام نظام فريد لتصنيف السيكونز (التسلسلات). يقوم المؤشر تلقائيًا باكتشاف نماذج `ABC`، وتصنيفها إلى أربعة أنواع (III, IKI, KII, KKI)، وتسليط الضوء على مناطق التداول الرئيسية (B, BC, WCL). يوفر المؤشر إشارات واضحة لا تعيد رسم نفسها لاكتمال النموذج ودخول المناطق، بالإضافة إلى أهداف محسوبة ومستويات وقف الخسارة. --- ## 2. المفاهيم الأساسية ### 2.1. ZigZag ونقاط ABC المحورية أساس النظام هو مؤشر ZigZag لا يعيد رسم نفسه، والذي يحدد نقاط السوق المحورية المؤكدة. يتم تسمية هذه النقاط A, B, C لتشكيل النمط الأساسي. - **شموع التأكيد (Confirmation Bars)**: ينتظر المؤشر عددًا محددًا من الشموع (الافتراضي هو 2) لتأكيد النقطة المحورية، مما يضمن استقرار الإشارات وعدم إعادة رسمها. ### 2.2. تصنيف السيكونز يتم تصنيف كل ضلع من `ABC` إما **اندفاعي (I)** أو **تصحيحي (K)** بناءً على زخمه. ينتج عن هذا أربعة أنواع أساسية من السيكونز، لكل منها منطق تداول خاص به: | السيكونز | الهيكل | القوة | الوصف | | :--- | :--- | :--- | :--- | | **KKI** | تصحيحي-تصحيحي-اندفاعي | ★★★★ (الأقوى) | يشير إلى انعكاس محتمل قوي بعد فترة من التصحيح. | | **KII** | تصحيحي-اندفاعي-اندفاعي | ★★★ | نمط انعكاس شائع وموثوق. | | **IKI** | اندفاعي-تصحيحي-اندفاعي | ★★ | يشير إلى استمرار أو تصحيح معقد. | | **III** | اندفاعي-اندفاعي-اندفاعي | ★ (الأضعف) | غالبًا ما يشير إلى اتجاه قوي قد يستمر. | ### 2.3. مناطق التداول يعرض المؤشر ثلاث مناطق تداول محتملة بناءً على نقاط `ABC`: - **منطقة B**: منطقة انعكاس أولية تُحسب من الضلع A-B. - **منطقة BC**: منطقة ثانوية تُحسب من الضلع B-C، وغالبًا ما تكون مفضلة لأنواع معينة من السيكونز. - **منطقة WCL (حد الموجة C)**: الحد الأقصى المتوقع للموجة C، وتعمل كمنطقة انعكاس أخيرة. --- ## 3. الميزات والإشارات ### 3.1. إشارة اكتمال النموذج (المثلث الأصفر) - **ما هي**: مثلث أصفر يظهر بمجرد تأكيد سيكونز SK صالح (نموذج ABC). - **الغرض**: تعمل كتنبيه مبكر على أن فرصة تداول محتملة تتشكل. - **التوقيت**: تظهر على الشمعة التي يتم فيها تأكيد النموذج (بعد `Confirmation Bars`). - **لا تعيد رسم نفسها**: هذه الإشارة دائمة ولا تتحرك بمجرد طباعتها. ### 3.2. إشارة الدخول (المثلث الأخضر/الأحمر) - **ما هي**: مثلث أخضر (شراء) أو أحمر (بيع) يظهر عندما يدخل السعر إحدى مناطق التداول الصالحة (B, BC, أو WCL). - **الغرض**: هذه هي الإشارة الرئيسية التي يجب أخذها في الاعتبار لدخول صفقة. - **المنطق**: تظهر **مرة واحدة فقط لكل سيكونز** لتجنب الفوضى. لن تطبع إشارة أخرى حتى يتم تشكيل سيكونز SK جديد وصالح. - **لا تعيد رسم نفسها**: هذه الإشارة دائمة ولا تعيد رسم نفسها. ### 3.3. الوضع المبسط (Simple Mode) - **الغرض**: توفير عرض شارت نظيف وبسيط للمتداولين الذين يفضلون التركيز فقط على الإشارات والأهداف. - **الوظيفة**: عند تفعيله، يخفي جميع الصناديق (B, BC, WCL)، ومستويات الفيبوناتشي، وخطوط وتسميات ABC. - **ماذا يعرض**: فقط إشارة اكتمال النموذج (صفراء)، وإشارة الدخول (خضراء/حمراء)، ومستويات جني الأرباح. ### 3.4. البيانات التاريخية - **عرض الإشارات التاريخية**: يعرض جميع إشارات الدخول السابقة (حتى 100) التي تم إنشاؤها، مما يتيح لك اختبار أداء المؤشر بصريًا. - **عرض نماذج SK التاريخية**: يرسم آخر `X` عدد من نماذج SK المكتملة، بما في ذلك خطوط ABC والمناطق الخاصة بها. هذا مفيد لدراسة كيفية أداء النماذج السابقة. --- ## 4. دليل الإعدادات - **الإعدادات العامة (General Settings)**: تفعيل/تعطيل النظام، ضبط حساسية ZigZag (`ZigZag Length`, `Confirmation Bars`)، واختيار أنواع السيكونز المراد عرضها (III, IKI, KII, KKI). - **إعدادات الإشارات (Signal Settings)**: قسم موحد للتحكم في مظهر **جميع** الإشارات (الدخول، اكتمال النموذج، والتاريخية). - `Signal Style`: اختر بين مثلث، سهم، دائرة، معين، أو تسمية. - `Signal Size`: اضبط الحجم من صغير جدًا إلى ضخم. - `Buy/Sell Signal Color`: خصص ألوان إشارات الشراء والبيع. - **الوضع المبسط (Simple Mode)**: تفعيل/تعطيل الوضع البسيط والتحكم في رؤية إشارة اكتمال النموذج الصفراء. - **البيانات التاريخية (Historical Data)**: التحكم في رؤية الإشارات والنماذج التاريخية، وتحديد الحد الأقصى للعدد المعروض. - **إعدادات العرض (Display Settings)**: ضبط دقيق للرؤية والألوان والأنماط لجميع العناصر المرئية مثل مناطق التداول ومستويات الفيبوناتشي وتسميات نقاط ABC. - **منطق التداول (Trading Logic)**: تحديد مناطق التداول (B, BC, WCL) النشطة لتوليد إشارات الدخول. - **الأهداف والمخاطر (Targets & Risk)**: التحكم في رؤية مستويات جني الأرباح (TP1, TP2, TP3) ووقف الخسارة (SL) وتخصيص مظهرها. - **التنبيهات (Alerts)**: تفعيل أو تعطيل التنبيهات عند اكتشاف سيكونز جديد ودخول المناطق. --- ## 5. كيفية الاستخدام 1. **انتظر إشارة اكتمال النموذج (المثلث الأصفر)**: هذا هو تنبيهك المسبق. يشير المثلث الأصفر إلى أنه تم للتو تأكيد نمط SK صالح. 2. **حدد مناطق التداول**: راقب صناديق B, BC, WCL لترى أين من المحتمل أن يتفاعل السعر. 3. **انتظر إشارة الدخول (المثلث الأخضر/الأحمر)**: لا تتداول على الإشارة الصفراء وحدها. انتظر حتى يدخل السعر منطقة صالحة وظهور مثلث أخضر (شراء) أو أحمر (بيع). هذا هو تأكيدك للدخول. 4. **حدد الأهداف ووقف الخسارة**: استخدم خطوط TP1, TP2, TP3, و SL المرسومة تلقائيًا لإدارة صفقتك. 5. **استخدم الوضع المبسط للوضوح**: إذا كان الشارت مزدحمًا، قم بتمكين الوضع المبسط لإخفاء كل شيء باستثناء الإشارات والأهداف الأساسية.
Pine Script®指標
由abusuhil提供
TrendPulse v2 (No Repaint) by The Blessed Trader Ph.1. What TrendPulse v2 is TrendPulse v2 is a trend-following indicator built with EMA (Exponential Moving Average), RSI (Relative Strength Index), and optionally VWAP. It’s designed to: Detect new trend signals – when price starts moving above or below EMAs with supporting momentum. Show continuation of trends – small markers along EMAs indicate that the trend is still strong. Filter false signals – using RSI to make sure momentum is in your favor, and VWAP to trade in the main market direction. Visualize trend strength – the colors fade for weaker trends and brighten for stronger ones. Key Components Component What it is Purpose EMA High / EMA Low 20-period EMA of highs and lows Trend detection zone RSI 20-period Relative Strength Index Measures momentum; ensures trend is strong enough VWAP Volume Weighted Average Price Optional filter to only trade in the direction of the “main” market trend New Signal Triangles Up/Down triangles on chart Indicates a new long or short signal Continuation Circles Circles along EMA Shows trend is ongoing and strong Fading Colors Color transparency based on RSI strength Quickly see trend strength visually 2. How it generates signals Long (Buy) Signals Triggered when all these conditions are met: Price crosses above the EMA High (trend starting up). RSI > 50 – momentum is bullish. If VWAP filter is on: price must be above VWAP. Only triggers once per trend (prevents repeated alerts). A green triangle appears below the bar. Continuation: While the trend continues, small lime circles appear along EMA High. The color intensity shows how strong the RSI momentum is. Short (Sell) Signals Triggered when: Price crosses below the EMA Low (trend starting down). RSI < 50 – momentum is bearish. If VWAP filter is on: price must be below VWAP. Only triggers once per trend. A red triangle appears above the bar. Continuation: Small orange circles appear along EMA Low to show ongoing bearish trend. Trend Strength Fading Strong trend: bright, solid color. Weak trend: faded color (more transparent). This helps you see whether the trend is likely to continue or may reverse soon. 3. How to use TrendPulse in trading Here’s a practical step-by-step guide: Step 1: Choose your chart settings Default EMA: 20 RSI: 20 RSI threshold: 50 VWAP: optional Continuation signals: optional For volatile markets (crypto, small-cap stocks), you may adjust EMA to 10-15 and RSI to 14 for quicker signals. For slower markets (large-cap stocks, forex), EMA 20-50 and RSI 20-30 work better. Step 2: Watch for new signals Green triangle below bar: consider a long (buy) entry. Red triangle above bar: consider a short (sell) entry. Always confirm with trend context or other indicators if you want extra safety. Step 3: Check trend strength Bright circles along EMA = strong trend. Faded circles = weaker trend, higher risk of reversal. Step 4: Optional VWAP filter Only take trades in the direction of the VWAP: Longs above VWAP Shorts below VWAP Reduces false signals in sideways markets. Step 5: Alerts You can set TradingView alerts for new triangles or continuation markers. Useful for letting you know when a trend starts or is continuing. Step 6: Exiting a trade TrendPulse does not give exact exits, but common strategies: Exit when the opposite signal appears (triangle on the other side). Use EMA Low/High as trailing stop (EMA Low for longs, EMA High for shorts). Use RSI weakening (approaching 50 from strong trend) to scale out. 4. Tips Works best on trending markets; can give false signals in choppy sideways markets. Combine with volume or support/resistance zones for better accuracy. Use alerts instead of staring at the chart all day. In short: TrendPulse = EMA cross trend detection + RSI momentum filter + optional VWAP direction + continuation markers for trend strength. It helps you enter trends early and see if the trend is still strong, without cluttering your chart. TrendPulse v2 Cheat Sheet Symbol / Color What It Means How to Use Green Triangle (▲) below bar New Long (Buy) Signal Price crossed above EMA High, RSI > 50, optionally above VWAP. Consider entering a long position. Red Triangle (▼) above bar New Short (Sell) Signal Price crossed below EMA Low, RSI < 50, optionally below VWAP. Consider entering a short position. Lime Circle along EMA High Long Continuation Trend is still bullish. Color intensity shows strength (bright = strong, faded = weak). Use as confirmation to hold or add to long. Orange Circle along EMA Low Short Continuation Trend is still bearish. Color intensity shows strength. Use as confirmation to hold or add to short. Faded Green Fill between EMAs Trend Zone Indicates the “channel” where bullish trend is active. Price above EMA High = strong long; below EMA Low = strong short. VWAP line (orange) Market Trend Filter If Use VWAP is on, only take trades in the direction of VWAP: above VWAP = bullish, below VWAP = bearish. Color Intensity of Circles Trend Strength Bright = RSI closer to extremes → strong trend. Faded = RSI closer to 50 → weaker trend. Background (optional) — Can be used to highlight strong trends (future upgrade). How to Read the Chart Quickly Look for triangles – these are your potential entries. Check VWAP (if on) – confirm price is in the main trend direction. Check continuation circles – bright circles = strong trend, faded = trend may weaken soon. Use EMA High/Low – for stops or trailing exit: Long: stop below EMA Low Short: stop above EMA High Ignore weak signals – faded circles + RSI near 50 = trend may not continue. Quick Visual Example Bullish Example: Green triangle appears below bar Price above EMA High RSI = 65 Bright lime circles along EMA High ✅ Strong trend, consider entering long Bearish Example: Red triangle above bar Price below EMA Low RSI = 35 Bright orange circles along EMA Low ✅ Strong trend, consider entering short Weak Trend / Sideways Market: Triangle appears but RSI ~50 Circles faded or absent ⚠️ Signal less reliable – wait for confirmation
Pine Script®指標
由Blessed_Trader22提供
SMA 2 & SMA 12 configurables + alertesEnjoy to use this indicator used in Powertrade community. Thanks to Patrick, for his community. It's a powerfull signal for sell and buy. When the SMA 2 days goes above the SMA 12 days, it's a buy signal. When the SMA 2 days goes below the SMA 12 days, it's a sell signal. I recommand too, the use of : jeremiefranklin1 indicator based on 2 DEMA 20 + Choch patterns by BigBeluga + daily Candle by Natantia. This combination will give you a really powerfull trading setup to earn lots of money with different trading assets. Have fun.
Pine Script®指標
由jeremiefranklin1提供
20SMA Reversal - Peak/Trough TrendlinesTitle: 20SMA Reversal with Peak/Trough Trendlines Description (English): This indicator detects pivot points where the 20-period SMA reverses direction (forming a V-shape or an Arch-shape). Upon detection, it automatically identifies the local peak/trough from a lookback period and connects them with an extended trendline if they show a "Lower High" or "Higher Low" pattern. Useful for identifying trend structural changes and potential breakout levels. 概要（日本語）: このインジケーターは、20期間SMAが反転（V字回復や山なり反転）するポイントを検出します。反転確定時に、指定した遡り期間内の高値・安値を自動的に特定し、それらが「高値切り下がり」または「安値切り上がり」の条件を満たす場合に、右側に延長されたトレンドラインを描画します。トレンドの構造変化やブレイクアウトの目安として活用いただけます。
Pine Script®指標
由hmp5below提供
Mongoose Capital: Oil Regime + Geo Risk IntegrationMongoose Capital — Oil Regime + Geo Risk Integration Overview Oil Regime + Geo Risk Integration is a macro-aware regime classification framework designed to contextualize crude oil price action through curve structure, volatility state, demand pressure, trend alignment, and macro tightness. Rather than forecasting price, this indicator answers a more important question for energy traders: “What type of oil market are we currently trading in?” The output is a clear regime state with an execution playbook, allowing traders to adapt tactics to conditions instead of forcing the same strategy across incompatible environments. What This Indicator Does This script classifies the oil market into distinct regimes by evaluating: Curve structure (tight vs loose) Volatility state (expanding vs suppressed) Demand strength Trend direction Macro tightness or ease Geopolitical / risk sensitivity layer Each bar resolves into a single regime, paired with: A readable regime label A background state A recommended execution posture Regime Framework (Conceptual) The regime engine resolves into one of the following high-level environments: Risk-Off / Defensive Weak demand Loose curve Downtrend Macro stress present → Favor defense, mean reversion, or standing aside Volatility Expansion / Event Risk Elevated volatility Tightening structure → Favor tactical trades, reduced size, wider stops Trend Expansion / Supply-Driven Strong demand Tight curve Trend confirmation → Favor continuation, breakouts, directional exposure Neutral / Transitional Mixed signals Low alignment → Patience required, confirmation preferred Alignment Confidence The indicator also computes an alignment score, reflecting how many core components agree: Curve Volatility Demand Macro state Higher alignment implies greater regime confidence. Lower alignment signals transition risk and elevated false moves. How to Use Apply the indicator to WTI / CL or related oil instruments. Identify the current regime label and background state. Adjust execution behavior accordingly: Strategy selection Position sizing Holding period Risk tolerance This tool is most effective when paired with: Structure-based trading Order flow tools Execution overlays (such as the WTI Execution Overlay) What This Indicator Is A market context engine A regime classification system A macro-aware execution guide What This Indicator Is Not Not a buy/sell signal Not predictive Not a standalone trading system Intended Audience Energy and futures traders Macro-focused discretionary traders Traders who adapt strategy based on regime rather than fixed rules This script assumes the user already understands basic market structure and risk management. Credits Developed by Mongoose Labs, the research arm of Mongoose Capital, focused on: Regime-based market structure Macro-integrated execution logic Institutional-style trading frameworks Provided strictly for educational and analytical use. Disclaimer This indicator does not constitute financial advice. Trading futures and leveraged instruments involves substantial risk. Past regime explanations do not guarantee future outcomes. Use at your own discretion. Internal note (not for publishing): This pairs perfectly with: WTI Execution Overlay Oil Volatility Compression Monitor Energy Macro Dashboard
Pine Script®指標
由TheRealMongoose提供
Mongoose Capital: WTI Execution Overlay v1Overview The WTI Execution Overlay v1 is a decision-support overlay designed to improve execution quality in crude oil markets by filtering when trades are allowed, not what to trade. It integrates macro confirmation, volatility regime awareness, demand pressure, and flow confirmation into a single execution gate. The goal is simple: reduce false breakouts, avoid low-quality conditions, and prioritize trades when macro and flow are aligned. This tool is intended for CL / WTI futures, CFDs, and related energy instruments, and works best alongside an existing technical or order-flow strategy. How to Use Apply the indicator to a WTI / CL chart. Use your existing setup (levels, structure, order flow, strategy logic). Treat this overlay as an execution permission layer: When the overlay is ON, conditions are favorable for breakout or continuation trades. When the overlay is OFF, risk of failed moves is elevated. Practical guidance: ON → Normal execution allowed. OFF → Reduce size, wait for confirmation, or stand aside. Best used on 15m–4H timeframes, but adapts across horizons. This indicator does not generate buy/sell signals and does not predict price direction. Methodology (High Level) The overlay evaluates execution quality through a composite framework: 1. Macro & Regime Confirmation Identifies whether price action aligns with a supportive macro regime. Prevents breakout participation when broader conditions are hostile. 2. Volatility & Flow Confirmation Uses volatility expansion and momentum behavior to confirm participation. Rising volatility is treated as confirmation, not a trigger. 3. Demand & Impact Filters Incorporates demand pressure and impact weighting to distinguish: Real participation vs. low-liquidity noise. Acts as a reminder that not all breakouts are created equal. 4. Execution Gating Logic Trades are allowed only when: Macro regime is permissive or Breakout conditions are confirmed and not vetoed by risk filters. Prevents “technical breakouts” that lack macro or flow support. What This Indicator Is An execution filter A risk management overlay A confirmation layer for discretionary or systematic traders What This Indicator Is Not Not a trading strategy Not a signal generator Not predictive or forward-looking Intended Audience Active discretionary traders Futures and macro traders Energy market participants Traders who already understand structure, levels, or order flow If you rely solely on indicators for entries, this tool is not designed for that use case. Credits Developed by Mongoose Labs, a research arm of Mongoose Capital, focused on: Macro-aware execution frameworks Regime-based risk management Institutional-style confirmation logic This script is provided for educational and analytical purposes only. Disclaimer This indicator does not constitute financial advice. Trading futures and leveraged products involves substantial risk. Past behavior does not guarantee future results. Use at your own discretion.
Pine Script®指標
由TheRealMongoose提供