立即開始

圖表形態

Friendly IT Algo SystemFriendly IT Algo System Hello, this is the YouTube channel 'Friendly IT'. This indicator is an All-in-One tool designed to help beginners easily identify trends and entry points by automating complex chart analysis. It goes beyond simple moving average crosses by analyzing Volume (Whale Activity), Divergence, and Support/Resistance to display highly reliable signals. The most significant feature of this indicator is that it clearly displays the specific Long and Short entry prices directly on the chart. This allows traders to know exactly at what price to enter the market without confusion. Users can freely adjust all setting values, such as EMA lengths and volume multipliers, to optimize the strategy for the specific stock or cryptocurrency they are trading. 1. Whale Volume Hunter - Displays fluorescent candles and entry prices only when volume exceeds 1.5x the average. - Filters out fake signals and captures genuine trends driven by institutional activity. 2. Smart Order Block - Green Box: High probability support zone (Buy area). - Red Box: High probability resistance zone (Sell area). - Automatically draws boxes to help set price targets and stop-loss levels. 3. Divergence Lines - Bullish Divergence (Green Line): Price makes a lower low, but the indicator makes a higher low (Reversal signal). - Bearish Divergence (Red Line): Price makes a higher high, but the indicator makes a lower high (Drop signal). - Visually connects highs and lows with lines for intuitive reading. 4. Auto Fibonacci - Automatically plots the key reversal levels: 0.618 (Bold White Line) and 0.5. 5. Noise Filter (Sideways Market) - Uses the ADX indicator to highlight choppy, sideways markets with a Gray Background. - It is recommended to avoid trading during these periods to prevent losses. 1. Entry - LONG: Consider buying when a Green Neon Candle appears with a price number at the bottom. - SHORT: Consider selling when a Pink Neon Candle appears with a price number at the top. 2. Exit - Take partial profits at Order Blocks (Colored Boxes). - Take profit when price touches the White Bold Line (Fib 0.618). - React immediately if an opposing Divergence Line appears. 3. Note - Reliability is low during Gray Backgrounds (Sideways market); avoid entering trades. Friendly IT Algo System 안녕하세요, 유튜브 채널 '친절한 아이티'입니다. 이 지표는 복잡한 차트 분석을 자동화하여 초보자도 쉽게 추세와 타점을 잡을 수 있도록 설계된 올인원(All-in-One) 보조지표입니다. 단순한 이동평균선 크로스가 아니라, 거래량(세력 개입), 다이버전스, 매물대를 복합적으로 분석하여 신뢰도 높은 신호만 표시합니다. 이 지표의 가장 큰 장점은 차트에 롱(Long)과 숏(Short)의 진입 가격을 숫자로 명확하게 표시해 준다는 것입니다. 덕분에 사용자는 헷갈리지 않고 정확한 가격에 진입 타점을 잡을 수 있습니다. 이동평균선(EMA) 길이를 비롯한 모든 설정값은 본인이 거래하는 주식이나 코인의 특성에 맞게 자유롭게 변경하여 최적화할 수 있습니다. 1. 세력 거래량 감지 (Whale Volume Hunter) - 평균 거래량의 1.5배 이상이 터질 때만 형광색 캔들과 진입 가격을 표시합니다. - 속임수 신호를 걸러내고 세력이 개입한 진짜 추세만 포착합니다. 2. 스마트 오더블락 (Smart Order Block) - 초록색 박스: 가격이 지지받을 확률이 높은 매수 구간 - 빨간색 박스: 가격이 저항받을 확률이 높은 매도 구간 - 차트에 자동으로 박스를 그려주어 목표가 및 손절 라인 설정에 도움을 줍니다. 3. 다이버전스 라인 (Divergence Lines) - 상승 다이버전스 (초록선): 가격은 하락했으나 지표가 상승할 때 (반등 신호) - 하락 다이버전스 (빨간선): 가격은 상승했으나 지표가 하락할 때 (하락 신호) - 꼬리와 꼬리를 잇는 선으로 직관적으로 표시됩니다. 4. 자동 피보나치 (Auto Fibonacci) - 반등의 핵심 구간인 0.618(흰색 굵은 선)과 0.5 구간을 자동으로 작도합니다. 5. 횡보장 필터 (Noise Filter) - ADX 지표를 활용해 추세가 없는 지루한 횡보장은 회색 배경으로 표시합니다. - 이때는 매매를 쉬면서 손실을 방지할 수 있습니다. 1. 진입 (Entry) - LONG: 초록색 형광 캔들과 함께 하단에 가격(숫자)이 뜨면 매수 고려 - SHORT: 핑크색 형광 캔들과 함께 상단에 가격(숫자)이 뜨면 매도 고려 2. 청산 (Exit) - 오더블락(색깔 박스)에 도달했을 때 분할 익절 - 하얀색 굵은 선(피보나치 0.618)에 닿았을 때 익절 - 반대 방향의 다이버전스 선이 생기면 즉시 대응 3. 주의사항 - 회색 배경(횡보장)에서는 신뢰도가 낮으니 진입을 자제하세요.
Pine Script®指標
由mijookok提供
CBS Strategy with Trailing Stop _ IK3-Candle High/Low Breakout Strategy – Clean, Powerful, Fully Customizable (Pine Script v6) A simple yet effective momentum breakout strategy that triggers trades when price closes above the highest high or below the lowest low of the previous 3 completed candles. Perfect for trending markets (stocks, forex, crypto, indices) on any timeframe. Key Features: • Pure price-action breakout logic (no repainting) • Long & Short entries with visual triangle signals • Built-in Stop Loss & Take Profit (fixed % or ATR-based) • Optional Trailing Stop (percentage or ATR multiplier) • All risk parameters fully adjustable from the settings panel • Clean on-chart visualization of SL, TP, and active trailing stop levels • Works on all instruments and timeframes Default Settings (2:1 Reward/Risk): • Stop Loss: 1.5% • Take Profit: 3.0% • Trailing Stop: 1.0% (optional) How to Use: 1. Add to chart 2. Adjust risk settings to match your style (fixed % or ATR) 3. Enable/disable trailing stop as needed 4. Backtest and optimize per instrument/timeframe Fully open-source • No external libraries • Pine Script v6 Great for swing trading, intraday breakouts, or as a base for further enhancements. Happy trading!
Pine Script®策略
由ickr3078提供
Gabbie - LiquidityGabbie – Liquidity identifies high-probability liquidity pools on your current trading timeframe. It detects swing highs/lows that fail to meaningfully break prior highs/lows, marking areas where liquidity is most likely resting. It also plots: Asia Session High / Low as a key liquidity and mean-reversion zone Support & Resistance zones derived from recent swing behavior on the active timeframe This indicator is designed to support discretionary traders who model liquidity, sessions, and structure. Settings Adjust the font size of the liquidity labels ($$$). All other features are optimized to work on default settings. Limitations / reminder Liquidity levels are probabilistic. Use alongside confirmation tools and always apply your own risk management.
Pine Script®指標
由gabbietrades提供
Gabbie - FVG/OBGabbie – FVG-OB plots Fair Value Gaps (FVGs) and Order Blocks (OBs) to help visualize price imbalances and institutional reaction zones. Fair Value Gaps Bullish FVGs and Bearish FVGs are marked automatically. The indicator also shows when an FVG is mitigated (price returns to fill the imbalance). If price wicks into an FVG without a full body close through it, the FVG remains valid under this model. Order Blocks / Breaker Blocks Bullish OBs are marked in green Bearish OBs are marked in red Breaker Blocks are marked in yellow Use these zones for confluence with your market structure and liquidity framework. Settings Choose the timeframe source for OB/BB detection. Adjust the number of active FVGs displayed. Defaults are designed for immediate use. Limitations / reminder Zones are plotted from historical price action and are not trade guarantees. Always confirm with structure, liquidity, and risk rules.
Pine Script®指標
由gabbietrades提供
3 Fib Strategy – Automatic Trend Fib Extension ConfluenceWhat This Script Does ✔ Auto-detects swing highs and lows Using pivot detection, adjustable by the user. ✔ Builds 3 independent trend-based Fib extension projections Measures: Wave 1 → Wave 2 → Wave 3 Wave 2 → Wave 3 → Wave 4 Wave 3 → Wave 4 → Wave 5 ✔ Calculates the exact fib levels: 1.0 (1:1 extension) 1.236 extension 1.382 extension ✔ Detects confluence zones When all 3 fib measurement sets overlap at the same target: Green label = 1:1 confluence Orange label = 1.236–1.382 confluence ✔ Draws long dotted lines across the chart So you can visually track confluence zones.
Pine Script®指標
由ApedinCrypto提供
Multi-Asset Option Strike PricesMulti-Asset Option Strike Prices automatically plots dynamic option strike levels for multiple assets on your chart. The indicator detects the active symbol and draws strike ladders above and below the current price using customizable strike increments (FX, indices, commodities, metals, etc.). It also rounds price to the nearest strike, giving a precise structural reference used by institutional options desks. These strike levels help traders visualize trend direction, trend boundaries, and potential turning points based on how price interacts with known option clusters. By mapping evenly spaced strike steps, the indicator also highlights natural stop-loss and take-profit zones within a trend, allowing traders to manage risk around predictable option-driven price levels. Supports up to 10 assets, includes custom line styling, and provides automatic strike labeling.
Pine Script®指標
由Kevnett提供
Prob Stats PPIBW Prob Stats PPIBW - Data-Driven Trading Decisions Transform historical price patterns into actionable probabilities. This indicator analyzes thousands of periods to show you the real odds behind pivot hits, range expansions, inside bars, and weekend breakouts. What It Tracks Pivot Hit Rates (D/W/M/Q/6M/Y) What percentage of pivot points get touched during their period? Includes recent period comparison to spot regime changes. Example: "Daily: 82.3% (450/547) | L30: 76.7% (23/30)" Previous Period Levels (D/W/M) How often does current period break previous period's high or low? Only counts actual range expansion, not equilibrium crossings. Helps gauge breakout probability. Inside Bar Analysis (D/W/M) When price consolidates inside previous period's range, what are the odds of a breakout? Only appears when currently in an inside bar. Weekend Breakdown When Sat/Sun breaks Mon-Fri range, does the following week continue? Critical for crypto traders and weekend gap analysis. Key Features - Recent Period Comparison: See if recent behavior differs from historical averages - Self-Documenting: Hover over any header for instant explanations - Color-Coded Sections: Yellow (Pivots), Orange (Prev Period), Pink (Inside Bar), Green (Weekend) - Blue Background: Recent stats highlighted for easy identification - Dynamic Layout: Adapts based on market conditions - Real-Time Updates: Includes current period for live probability tracking How To Use 1. Add to any chart (best on Daily+ for maximum historical data) 2. Hover over column headers to understand each statistic 3. Compare historical vs recent probabilities 4. Use probabilities to inform position sizing and expectations Example: Weekly pivot shows 78% historical hit rate but only 60% in last 30 weeks. Recent regime change suggests lower probability of test. Technical Details - Pine Script v6 - Rolling window arrays track last 30/30/12 periods for D/W/M - Previous Period excludes EQ crossings for accurate stats - Works on all timeframes, optimized for Daily+ - Configurable table position Perfect For Traders seeking data-driven confirmation, those wanting to quantify probability vs guessing, regime change detection, and crypto traders analyzing weekend patterns. Note: Past performance doesn't guarantee future results. Use these statistics as one input in your overall trading strategy.
Pine Script®指標
由flashmatrix提供
FVG – (auto close + age) GR V1.0FVG – Fair Value Gaps (auto close + age counter) Short Description Automatically detects Fair Value Gaps (FVGs) on the current timeframe, keeps them open until price fully fills the gap or a maximum bar age is reached, and shows how many candles have passed since each FVG was created. Full Description This indicator automatically finds and visualizes Fair Value Gaps (FVGs) using the classic 3-candle ICT logic on any timeframe. It works on whatever timeframe you apply it to (M1, M5, H1, H4, etc.) and adapts to the current chart. FVG detection logic The script uses a 3-candle pattern: Bullish FVG Condition: low > high Gap zone: Lower boundary: high Upper boundary: low Bearish FVG Condition: high < low Gap zone: Lower boundary: high Upper boundary: low Each detected FVG is drawn as a colored box (green for bullish, red for bearish in this version, but you can adjust colors in the inputs). Auto-close rules An FVG remains on the chart until one of the following happens: Full fill / mitigation A bullish FVG closes when any candle’s low goes down to or below the lower boundary of the gap. A bearish FVG closes when any candle’s high goes up to or above the upper boundary of the gap. Maximum bar age reached Each FVG has a maximum lifetime measured in candles. When the number of candles since its creation reaches the configured maximum (default: 200 bars), the FVG is automatically removed even if it has not been fully filled. This keeps the chart cleaner and prevents very old gaps from cluttering the view. Age counter (labels inside the boxes) Inside every FVG box there is a small label that: Shows how many bars have passed since the FVG was created. Moves together with the right edge of the box and stays vertically centered in the gap. This makes it easy to distinguish fresh gaps from older ones and prioritize which zones you want to pay attention to. Inputs FVG color – Main fill color for all FVG boxes. Show bullish FVGs – Turn bullish gaps on/off. Show bearish FVGs – Turn bearish gaps on/off. Max bar age – Maximum number of candles an FVG is allowed to stay on the chart before it is removed. Usage Works on any symbol and any timeframe. Can be combined with your own ICT / SMC concepts, order blocks, session ranges, market structure, etc. You can also choose to only display bullish or only bearish FVGs depending on your directional bias. Disclaimer This script is for educational and informational purposes only and is not financial advice. Always do your own research and use proper risk management when trading.
Pine Script®指標
由GRIDFX提供
SMC BOS/CHoCH + Auto Fib (5m/any TF) durane//@version=6 indicator('SMC BOS/CHoCH + Auto Fib (5m/any TF)', overlay = true, max_lines_count = 200, max_labels_count = 200) // --------- Inputs ---------- left = input.int(3, 'Pivot Left', minval = 1) right = input.int(3, 'Pivot Right', minval = 1) minSwingSize = input.float(0.0, 'Min swing size (price units, 0 = disabled)', step = 0.1) fib_levels = input.string('0.0,0.236,0.382,0.5,0.618,0.786,1.0', 'Fibonacci levels (comma separated)') show_labels = input.bool(true, 'Show BOS/CHoCH labels') lookbackHighLow = input.int(200, 'Lookback for structure (bars)') // Parse fib levels strs = str.split(fib_levels, ',') var array fibs = array.new_float() if barstate.isfirst for s in strs array.push(fibs, str.tonumber(str.trim(s))) // --------- Find pivot highs / lows ---------- pHigh = ta.pivothigh(high, left, right) pLow = ta.pivotlow(low, left, right) // store last confirmed swings var float lastSwingHighPrice = na var int lastSwingHighBar = na var float lastSwingLowPrice = na var int lastSwingLowBar = na if not na(pHigh) // check min size if minSwingSize == 0 or pHigh - nz(lastSwingLowPrice, pHigh) >= minSwingSize lastSwingHighPrice := pHigh lastSwingHighBar := bar_index - right lastSwingHighBar if not na(pLow) if minSwingSize == 0 or nz(lastSwingHighPrice, pLow) - pLow >= minSwingSize lastSwingLowPrice := pLow lastSwingLowBar := bar_index - right lastSwingLowBar // --------- Detect BOS & CHoCH (simple robust logic) ---------- var int lastBOSdir = 0 // 1 = bullish BOS (price broke above), -1 = bearish BOS var int lastBOSbar = na var float lastBOSprice = na // Look for price closes beyond last structural swings within lookback // Bullish BOS: close > recent swing high condBullBOS = not na(lastSwingHighPrice) and close > lastSwingHighPrice and bar_index - lastSwingHighBar <= lookbackHighLow // Bearish BOS: close < recent swing low condBearBOS = not na(lastSwingLowPrice) and close < lastSwingLowPrice and bar_index - lastSwingLowBar <= lookbackHighLow bosTriggered = false chochTriggered = false if condBullBOS bosTriggered := true if lastBOSdir != 1 // if previous BOS direction was -1, this is CHoCH (change of character) chochTriggered := lastBOSdir == -1 chochTriggered lastBOSdir := 1 lastBOSbar := bar_index lastBOSprice := close lastBOSprice if condBearBOS bosTriggered := true if lastBOSdir != -1 chochTriggered := lastBOSdir == 1 chochTriggered lastBOSdir := -1 lastBOSbar := bar_index lastBOSprice := close lastBOSprice // --------- Plot labels for BOS / CHoCH ---------- if bosTriggered and show_labels if chochTriggered label.new(bar_index, high, text = lastBOSdir == 1 ? 'CHoCH ↑' : 'CHoCH ↓', style = label.style_label_up, color = color.new(color.orange, 0), textcolor = color.white, yloc = yloc.abovebar) else label.new(bar_index, high, text = lastBOSdir == 1 ? 'BOS ↑' : 'BOS ↓', style = label.style_label_left, color = lastBOSdir == 1 ? color.green : color.red, textcolor = color.white, yloc = yloc.abovebar) // --------- Auto Fibonacci drawing ---------- var array fib_lines = array.new_line() var array fib_labels = array.new_label() var int lastFibId = na // Function to clear previous fibs f_clear() => if array.size(fib_lines) > 0 for i = 0 to array.size(fib_lines) - 1 line.delete(array.get(fib_lines, i)) if array.size(fib_labels) > 0 for i = 0 to array.size(fib_labels) - 1 label.delete(array.get(fib_labels, i)) array.clear(fib_lines) array.clear(fib_labels) // Decide anchors for fib: if lastBOSdir==1 (bullish) anchor from lastSwingLow -> lastSwingHigh // if lastBOSdir==-1 (bearish) anchor from lastSwingHigh -> lastSwingLow if lastBOSdir == 1 and not na(lastSwingLowPrice) and not na(lastSwingHighPrice) // bullish fib: low -> high startPrice = lastSwingLowPrice endPrice = lastSwingHighPrice // draw f_clear() for i = 0 to array.size(fibs) - 1 by 1 lvl = array.get(fibs, i) priceLevel = startPrice + (endPrice - startPrice) * lvl ln = line.new(x1 = lastSwingLowBar, y1 = priceLevel, x2 = bar_index, y2 = priceLevel, xloc = xloc.bar_index, extend = extend.right, color = color.new(color.green, 60), width = 1, style = line.style_solid) array.push(fib_lines, ln) lab = label.new(bar_index, priceLevel, text = str.tostring(lvl * 100, '#.0') + '%', style = label.style_label_right, color = color.new(color.green, 80), textcolor = color.white, yloc = yloc.price) array.push(fib_labels, lab) if lastBOSdir == -1 and not na(lastSwingHighPrice) and not na(lastSwingLowPrice) // bearish fib: high -> low startPrice = lastSwingHighPrice endPrice = lastSwingLowPrice f_clear() for i = 0 to array.size(fibs) - 1 by 1 lvl = array.get(fibs, i) priceLevel = startPrice + (endPrice - startPrice) * lvl ln = line.new(x1 = lastSwingHighBar, y1 = priceLevel, x2 = bar_index, y2 = priceLevel, xloc = xloc.bar_index, extend = extend.right, color = color.new(color.red, 60), width = 1, style = line.style_solid) array.push(fib_lines, ln) lab = label.new(bar_index, priceLevel, text = str.tostring(lvl * 100, '#.0') + '%', style = label.style_label_right, color = color.new(color.red, 80), textcolor = color.white, yloc = yloc.price) array.push(fib_labels, lab) // --------- Optional: plot lastSwing points ---------- plotshape(not na(lastSwingHighPrice) ? lastSwingHighPrice : na, title = 'LastSwingHigh', location = location.absolute, style = shape.triangledown, size = size.tiny, color = color.red, offset = 0) plotshape(not na(lastSwingLowPrice) ? lastSwingLowPrice : na, title = 'LastSwingLow', location = location.absolute, style = shape.triangleup, size = size.tiny, color = color.green, offset = 0) // --------- Alerts ---------- alertcondition(bosTriggered and lastBOSdir == 1, title = 'Bullish BOS', message = 'Bullish BOS detected on {{ticker}} @ {{close}}') alertcondition(bosTriggered and lastBOSdir == -1, title = 'Bearish BOS', message = 'Bearish BOS detected on {{ticker}} @ {{close}}') alertcondition(chochTriggered, title = 'CHoCH Detected', message = 'CHoCH detected on {{ticker}} @ {{close}}') // End
Pine Script®指標
由durane提供
V15.0 Adaptive Chameleon [Pro] # **V15.0 Adaptive Chameleon – Strategy Description** **Adaptive Chameleon** is a fully automated TradingView strategy powered by a signal engine based on multi-timeframe trend analysis, adaptive moving averages, and a volatility filter. The goal is to trade in the direction of a strong and confirmed trend, avoid opening trades in weak or manipulative price zones, and establish positions with a clearly defined risk/reward ratio. --- ## **1. General Logic and Philosophy** The strategy divides tasks between two timeframes: * **4-Hour Chart → Trend Manager (Boss)** Determines the direction and strength of the trend. * **4-Minute Chart → Entry Trigger (Operating Unit)** Generates the ideal entry signal in the direction of the trend. Thanks to this structure, the strategy both follows the long-term main direction and finds clear entries with low lag on smaller timeframes. --- ## **2. Trend Detection (4H)** The strategy uses **KAMA (Kaufman Adaptive Moving Average)** and **ADX** to identify trends on the higher timeframe. ### **KAMA – Adaptive Trend Line** * The KAMA is much more "smart" than traditional moving averages. * It accelerates during price movements and decelerates during sideways movements. * This allows for much clearer detection of trend direction. ### **ADX – Trend Strength Meter** The strategy only opens trades when **trend strength** is rising (above the ADX average). This prevents unnecessary trades when the trend is weak. ### **Trend Rules** * Price above the KAMA → **Uptrend** * Price below the KAMA → **Downtrend** * ADX widening → **Trend strong** The entry trigger is activated when these three conditions are met together. --- ## **3. Entry Engine (45m)** On the 45-minute timeframe, the system uses the following components: ### **AlphaTrend (MFI + ATR-Based Adaptive Line)** * Measures market flow direction with MFI (Money Flow Index), * Measures price level breakouts with ATR (Volatility). AlphaTrend detects whether the price is likely to reverse upwards or downwards. ### **Entry Signal** * **Buy signal:** If the AlphaTrend has reversed upwards based on recent bars * **Sell signal:** If the AlphaTrend has broken downwards ### **Pivot Points (For Stop)** * The **pivotLow** and **pivotHigh** levels of the last 10 bars are calculated. * These are used to determine the most logical stop distance. --- ## **4. Protection Shields** The strategy uses two main filters to protect against the most dangerous conditions in the crypto market: ### **1. Pump/Dump Filter** * A candlestick length greater than 4% is considered a "pump bar." * Never open a trade on these bars. The goal: to avoid sudden manipulation candlesticks. ### **2. RSI Filter** * Long trades: RSI > 45 (open long on weak momentum) * Short trades: RSI < 55 (open short on extremely strong momentum) These filters provide more balanced entries. --- ## **5. Final Entry Conditions** ### **All conditions are required simultaneously for long:** 1. 4H trend up 2. ADX trend strength increasing 3. 45m AlphaTrend issued a "buy" signal 4. RSI > 45 5. No candlestick pump 6. Date range is suitable ### **All conditions apply in the opposite direction for short.** --- ## **6. Exit Mechanism (Stop, TP, Trailing)** The strategy uses a three-layer structure on the exit side: ### **1. Pivot-Based Stop** * Stop distance = Entry price − Pivot Low (for long) * Minimum stop distance = **1% of the price** Provides both structural and mathematical security. ### **2. Fixed R:R (Default 1:2)** * TP = Entry + Stop Distance × R:R The default 2R target is ideal for trend systems. ### **3. Optional Trailing Stop** * Dynamic trailing stop that follows the price by a certain percentage. * Allows trend trades to yield greater profits. --- ## **7. Chart Displays** * Purple line:** 4H WEDGE (main trend line) * Yellow background:** Pump protection is active (trades will not be opened on that bar) --- ## **8. Practical Effect of the Strategy** This system has an adaptive structure based on trend variations. **Strengths:** * Very high accuracy (76–80% in SOL and ETH tests) * Low drawdown (approximately 6–7%) * Safe entries thanks to pump/dump and extreme momentum filters * Clearly defined stop and target structure * Low noise thanks to multi-timeframe compatibility **Weaknesses:** * Performance may decrease in sideways markets without trends * Overtrading may occur if the ADX filter is closed * Very small stops can sometimes cause unnecessary triggers --- ## **9. Conclusion** **Adaptive Chameleon** is a trend-based and highly stable strategy with well-established risk management, manipulation filtering, and entry into lower timeframes with clear trend direction detection and low-latency signals. SOL and ETH demonstrated strong and balanced performance in backtests with metrics such as: * **600+ trades** * **30–37% profit** * **76–80% win rate** * **Low max drawdown**
Pine Script®策略
由futash提供
Volume Z-Score// This indicator calculates the Z-Score of trading volume to identify // statistically significant volume spikes. It uses a dynamic percentile-based // threshold to highlight extreme volume events. // // How it works: // - Z-Score measures how many standard deviations the current volume is from the mean // - The threshold line represents the top 1% (99th percentile) of historical Z-Score values // - When volume Z-Score exceeds the threshold, the line turns red // // Use cases: // - Spot unusual institutional activity or large block trades // - Identify potential breakout or breakdown points with volume confirmation // - Filter out noise by focusing only on statistically extreme volume events // // Parameters: // - Period Length: Lookback period for calculating mean and standard deviation // - Percentile Threshold: Defines the extreme volume cutoff (default 99 = top 1%) // ===================================
Pine Script®指標
由Go3x3提供
My script// @version=5 indicator("Custom LuxAlgo-Style Levels", overlay=true, max_lines_count=500) // --- Trend Detection (EMA Based) fastEMA = ta.ema(close, 9) slowEMA = ta.ema(close, 21) trendUp = fastEMA > slowEMA trendDown = fastEMA < slowEMA plot(fastEMA, title="Fast EMA", color=color.new(color.blue, 0)) plot(slowEMA, title="Slow EMA", color=color.new(color.orange, 0)) // --- Buy / Sell Signals buySignal = trendUp and ta.crossover(fastEMA, slowEMA) sellSignal = trendDown and ta.crossunder(fastEMA, slowEMA) plotshape(buySignal, title="Buy", style=shape.labelup, color=color.new(color.green,0), size=size.small, text="BUY") plotshape(sellSignal, title="Sell", style=shape.labeldown, color=color.new(color.red,0), size=size.small, text="SELL") // --- Auto Support & Resistance length = 20 sup = ta.lowest(length) res = ta.highest(length) plot(sup, title="Support", color=color.new(color.green,70), linewidth=2) plot(res, title="Resistance", color=color.new(color.red,70), linewidth=2) // --- Market Structure (Simple Swing High/Low) sh = ta.highest(high, 5) == high sl = ta.lowest(low, 5) == low plotshape(sh, title="Swing High", style=shape.triangledown, location=location.abovebar, color=color.red, size=size.tiny) plotshape(sl, title="Swing Low", style=shape.triangleup, location=location.belowbar, color=color.green, size=size.tiny) // --- Alerts alertcondition(buySignal, "Buy Signal", "Trend Buy Signal Detected") alertcondition(sellSignal, "Sell Signal", "Trend Sell Signal Detected")
Pine Script®指標
由roadwaysmkd提供
RAFA's SMC Killer LITEWhat is the SMC Killer? The Smart Money Concepts (SMC) Killer is a trading indicator that identifies high-probability entry points using three proven strategies: Break of Structure (BOS) - Trades when price breaks key support/resistance levels Fair Value Gap (FVG) - Enters when price fills gaps in the market Order Blocks (OB) - Entry from institutional order clusters (optional display) This indicator automatically: ✅ Calculates correct entry, take-profit, and stop-loss levels for your asset ✅ Tracks win/loss statistics in real-time ✅ Works on 30+ different futures contracts ✅ Adapts tick size and point value automatically Asset Selection Supported Assets The indicator supports all major futures contracts: Equity Futures: ES (E-mini S&P 500) NQ (E-mini NASDAQ 100) YM (Mini Dow Jones) NKD (Nikkei 225) EMD (E-mini Midcap 400) RTY (Russell 2000) Currency Futures: 6A (Australian Dollar) 6B (British Pound) 6C (Canadian Dollar) 6E (Euro FX) 6J (Japanese Yen) 6S (Swiss Franc) 6N (New Zealand Dollar) Agricultural Futures: HE (Lean Hogs) LE (Live Cattle) GF (Feeder Cattle) ZC (Corn) ZW (Wheat) ZS (Soybeans) ZM (Soybean Meal) ZL (Soybean Oil) Energy Futures: CL (Crude Oil) QM (Mini Crude Oil) NG (Natural Gas) QG (E-mini Natural Gas) HO (Heating Oil) RB (RBOB Gasoline) Metal Futures: GC (Gold) SI (Silver) HG (Copper) PL (Platinum) PA (Palladium) QI (E-mini Silver) QO (E-mini Gold) Micro Futures: MES (Micro E-mini S&P 500) MYM (Micro E-mini Dow Jones) MNQ (Micro E-mini NASDAQ) M2K (Micro Russell 2000) MGC (E-Micro Gold) M6A (E-Micro AUD/USD) M6E (E-Micro EUR/USD) MCL (Micro Crude Oil) How to Select Your Asset Open the indicator settings (click ⚙️) Go to ASSET SELECT section Select Asset Category (e.g., "Metal Futures") Enter Select Asset Symbol (e.g., "GC" for Gold) Click OK The indicator will automatically load the correct: ✅ Tick size ✅ Point value ✅ Risk/reward calculations Settings Configuration ASSET SELECT Group Asset Category: Choose from 6 categories Select Asset Symbol: Enter symbol (ES, GC, CL, etc.) STRUCTURE Group Show Swing Structure: Display swing highs/lows Swing Length: Bars used for pivot detection (default: 5) Build Sweep: Show sweep formations (default: ON) What it does: Identifies the market trend and key turning points Teal/Green bars = Uptrend Orange/Red bars = Downtrend FVG Group Enable FVG Entry: Use Fair Value Gap strategy FVG Threshold: Sensitivity filter (default: 0) What it does: Detects gaps in price action that indicate imbalance Lower threshold = More signals Higher threshold = Fewer, high-quality signals RISK Group Show Bracket: Display entry/TP/SL lines Units/Contracts: Number of contracts to trade (default: 6) Stop Loss ($): Risk amount per trade (default: $250) Target ($): Profit target per trade (default: $1,000) Example: If you select ES with $250 stop loss: The indicator calculates: 250 ÷ (6 contracts × $50 per point) = 0.83 points Your stop loss line appears 0.83 points below entry TABLE Group Show Statistics: Display results table Position: Table location (default: top_right) Year: Start tracking from this year Month: Start tracking from this month Day: Start tracking from this day Trading Signals BUY Signal 🟢 When you see a green "BUY" label below a candle: Price is breaking higher (Break of Structure) OR price is filling a gap (Fair Value Gap) The indicator plots three lines: Green line = Entry price Lime/bright green line = Take Profit level Red line = Stop Loss level Action: Consider entering a LONG position at market or entry price SELL Signal 🔴 When you see a red "SELL" label above a candle: Price is breaking lower (Break of Structure) OR price is filling a gap (Fair Value Gap) The indicator plots three lines: Red line = Entry price Magenta/pink line = Take Profit level Orange line = Stop Loss level Action: Consider entering a SHORT position at market or entry price Signal Confirmation ✅ Wait for confirmation - Only trade signals on confirmed (closed) bars ✅ Check the trend - Look at candle colors (green uptrend, orange downtrend) ✅ Risk/reward ratio - TP should be at least 2x your SL risk Risk Management Position Sizing Example Trading Gold (GC) with ES Settings: Units: 6 contracts Stop Loss: $250 Target: $1,000 Tick Size: 0.1 (automatic for GC) Point Value: $100 per point (automatic for GC) Risk per trade: $250 Reward per trade: $1,000 Risk/Reward Ratio: 1:4 (Excellent!) Stop Loss Strategy Always place your stop loss below/above the entry lines The red/orange line shows exactly where to place SL Never move your stop loss against the trade (unless scaling) Use hard stops - set them immediately upon entry Take Profit Strategy Take profits at the lime/magenta line (TP level) Consider taking partial profits at 50% of target Let remaining 50% run to full target Use trailing stops if price moves in your favor Risk Per Trade Formula: (Stop Loss $) ÷ (Units × Point Value) Example for ES: Stop Loss: $250 Units: 6 Point Value: $50 Risk per point: 250 ÷ (6 × 50) = 0.83 points Reading the Chart Visual Elements Candle Colors: 🟩 Green/Teal = Uptrend (higher highs and higher lows) 🟥 Orange/Red = Downtrend (lower highs and lower lows) Signal Labels: BUY (Green) = Long entry opportunity SELL (Red) = Short entry opportunity Bracket Lines: Entry Line (Solid) = Your entry price TP Line (Bright color) = Take profit target SL Line (Red/Orange) = Stop loss level Success Markers: ✓ (Green checkmark) = Trade hit TP (WIN) ✗ (Red X) = Trade hit SL (LOSS) Statistics Table What Each Column Means 📊 ← Current asset being traded ├── Total: Total signals generated (buys + sells) ├── Buy: Number of buy signals ├── Sell: Number of sell signals ├── Win ✓: Trades that hit take profit ├── Loss ✗: Trades that hit stop loss ├── W%: Win rate percentage (wins ÷ total trades) └── Asset Info: Tick size and point value Example Reading 📊 ES Total: 15 Buy: 8 Sell: 7 Win ✓: 10 Loss ✗: 5 W%: 66.7% Asset Info: Tick: 0.25 | PV: $50 This means: 15 total signals since tracking started 10 wins, 5 losses 66.7% win rate (Professional level!) Trading ES with 0.25 tick and $50 point value Trading Examples Example 1: Gold (GC) Long Trade Setup: Asset: Metal Futures → GC Stop Loss: $150 Target: $600 Units: 2 contracts What happens: You see a BUY label on a green candle Entry line at 2050.0 TP line at 2050.6 (0.6 points higher = $600 profit) SL line at 2049.85 (0.15 points lower = $150 loss) Risk/Reward: 1:4 ✅ Trade Result: Price moves to 2050.6 → Label shows ✓ = WIN Table updates: Wins increases by 1, Win% increases Example 2: Crude Oil (CL) Short Trade Setup: Asset: Energy Futures → CL Stop Loss: $500 Target: $2,000 Units: 1 contract What happens: You see a SELL label on a red candle Entry line at 78.50 TP line at 77.50 (1.00 lower = $1,000 profit) SL line at 79.00 (0.50 higher = $500 loss) Risk/Reward: 1:2 ✅ Trade Result: Price drops to 77.50 → Label shows ✓ = WIN Table updates: Wins increases by 1, Win% increases Example 3: E-mini S&P (ES) Day Trading Setup: Asset: Equity Futures → ES Stop Loss: $250 Target: $1,000 Units: 6 contracts Swap Length: 5 (default) Enable FVG: ON Morning Session: See BUY at 5860.25 (swing break) Hit TP at 5861.08 = WIN ✓ Table shows: Total 1, Buy 1, Win 1, W% 100% See SELL at 5861.50 (FVG entry) Hit SL at 5860.67 = LOSS ✗ Table shows: Total 2, Sell 1, Win 1, L% 50% By end of day: 4 wins, 1 loss, 80% win rate Troubleshooting Issue 1: No signals appearing Solution: Check if both Show Bracket is ON Check if Enable FVG Entry is ON Try changing Swing Length (lower = more signals) Ensure you're on a 1-hour or higher timeframe Check chart has enough data (scroll left to see history) Issue 2: Signals appear but no entry lines Solution: Confirm Show Bracket is toggled ON Check Stop Loss ()andTarget() and Target ( )andTarget() are reasonable amounts Ensure your Units value is not 0 Try refreshing the chart Issue 3: Asset not recognized Solution: Check spelling of symbol (ES, not E-S) Verify asset is in the supported list Check you're in the correct category Try closing and reopening the chart Issue 4: Wrong stop loss/target levels Solution: Verify correct asset is selected Check Units setting matches your position size Verify Stop Loss ($) and Target ($) amounts Look at Asset Info in table to confirm tick size Manually calculate: SL $ ÷ (Units × Point Value) = Points Issue 5: Statistics table not showing Solution: Toggle Show Statistics OFF then back ON Try changing Table Position Refresh the chart Check that Show Table is enabled in settings Issue 6: Indicator acting "heavy" or laggy Solution: Turn off Show Swing Structure if not needed Turn off Show Bracket if reviewing historical trades Reduce chart's data window (don't load entire years) Refresh the chart Pro Tips 🚀 Tip 1: Start with Micro Futures Micro contracts (MES, MNQ, MCL) have lower cost Perfect for learning the strategy Same quality signals, smaller risk Tip 2: Trade During Peak Hours Equity Futures: 9:30-16:00 ET (Regular session) Energy: 18:00-16:00 CT (After hours active) Metals: 18:00-17:00 CT (Most liquid) Currencies: 5:00 PM - 4:00 PM ET (24-5 market) Tip 3: Combine Timeframes Look for entry on 1-hour chart Confirm on 15-minute chart Execute on 5-minute breakout More confluence = higher probability Tip 4: Track Your Trades Keep notes on WIN/LOSS trades Identify patterns in your losses Adjust settings based on performance Use Win% table to monitor improvement Tip 5: Risk Management First Never risk more than 2% of account per trade Respect your stop loss (don't move it) Take profits when levels are hit Be patient for high-probability setups Tip 6: Adjust for Market Conditions Trending markets: Increase Swing Length (6-8) Choppy markets: Decrease Swing Length (2-4) Low volatility: Reduce Stop Loss $ High volatility: Increase Target $ Quick Reference Card ──────────────────────────────────────────────────── SMC KILLER QUICK START ───────────────────────────────────────────────────── │ 1. Select Asset Category & Symbol │ 2. Set Units (contracts) │ 3. Set Stop Loss ($) - your max risk │ 4. Set Target ($) - your profit goal │ 5. Wait for BUY (green) or SELL (red) signal │ 6. Place entry at the entry line │ 7. Place stop at the red/orange line │ 8. Place take-profit at the lime/magenta line │ 9. Close trade when line closes (✓ or ✗) │ 10. Review statistics and adjust next trade └───────────────────────────────────────────────────── BUY Signal = Break Higher OR Fill Gap = LONG SELL Signal = Break Lower OR Fill Gap = SHORT Green candles = Uptrend Orange candles = Downtrend ✓ = Win (took profit) ✗ = Loss (hit stop) Support & Updates Check settings are correct for your asset Ensure adequate chart data is loaded Test on demo account first Start with smallest position size Track performance over 20+ trades
Pine Script®指標
由johnnybucks42提供
1
Thiru 369 LabelsThiru 369 Labels **Thiru 369 Labels** is a sophisticated time-based indicator that calculates the numerical sum of time digits and displays visual labels when the sum matches harmonic values (3, 6, or 9). Based on the mathematical principles popularized by Nikola Tesla, this indicator helps traders identify potential market timing opportunities during major trading sessions. 📊 What It Does This indicator monitors the current time (hour and minute) and calculates the sum of all digits, reducing it to a single digit. When this final sum equals 3, 6, or 9, a label is displayed on the chart. The indicator specifically focuses on three major trading sessions: - **London Session**: 02:30 - 07:00 (GMT-5) - **NY AM Session**: 07:00 - 11:30 (GMT-5) - **NY PM Session**: 11:30 - 16:00 (GMT-5) 🔢 How It Works ### Time Sum Calculation The indicator uses a standard mathematical reduction method: 1. **Extract Digits**: Takes the hour and minute (e.g., 09:51) 2. **Sum All Digits**: Adds all digits together (0 + 9 + 5 + 1 = 15) 3. **Reduce to Single Digit**: Continues reducing until single digit (15 → 1 + 5 = 6) 4. **Check Match**: If result equals 3, 6, or 9, displays label Examples: - **03:30** → 0 + 3 + 3 + 0 = **6** ✅ (Perfect 6) - **12:06** → 1 + 2 + 0 + 6 = **9** ✅ (Perfect 9) - **09:51** → 0 + 9 + 5 + 1 = 15 → 1 + 5 = **6** ✅ - **14:22** → 1 + 4 + 2 + 2 = 9 ✅ (Perfect 9) Session Detection The indicator automatically detects when the current time falls within active trading sessions and only displays labels during these periods. This ensures you're only seeing relevant timing signals during market hours. Cycle Detection The indicator can also detect different time cycles within sessions: - **90-minute cycles**: Major session periods - **30-minute cycles**: Sub-cycles within sessions - **10-minute cycles**: Detailed intervals 🎯 Key Features ✅ Time Sum Detection - Calculates time sum using standard 369 method - Displays labels when sum matches 3, 6, or 9 - Customizable target sums (default: 3, 6, 9) ✅ Session Monitoring - London Session (02:30 - 07:00) - NY AM Session (07:00 - 11:30) - NY PM Session (11:30 - 16:00) - Enable/disable individual sessions ✅ Cycle Detection - 90-minute cycles - 30-minute cycles - 10-minute cycles - Optional cycle information display ✅ Visual Customization - Label size options (Auto, Tiny, Small, Normal, Large, Huge) - Custom colors for each sum (3, 6, 9) - Session-based colors (Purple=London, Green=NY AM, Blue=NY PM) - Label transparency control - Text-only labels (no background box) ✅ Display Options - Show/hide time text - Show/hide cycle information - Drawing limit options (Current Day, Last 2/3/5 Days, All Days) - Debug table for real-time monitoring ✅ Advanced Settings - Timezone selection (27 timezone options) - Swing sensitivity for label positioning - Label offset control - Confirmed bars only option 📖 How to Use Step 1: Add Indicator to Chart 1. Open TradingView 2. Click "Indicators" button 3. Search for "Thiru 369 Labels" 4. Click to add to chart Step 2: Configure Basic Settings **Time Sum Settings:** - Enable Time Sum Detection: ✅ (default: ON) - Target Sums: "3,6,9" (default) - Label Size: Choose your preferred size - Drawing Limit: "All Days" (default) or limit to specific periods **Session Settings:** - Monitor London Session: ✅ (default: ON) - Monitor NY AM Session: ✅ (default: ON) - Monitor NY PM Session: ✅ (default: ON) **Cycle Settings:** - 90 Minute Cycles: ✅ (default: ON) - 30 Minute Cycles: ✅ (default: ON) - 10 Minute Cycles: ✅ (default: ON) Step 3: Customize Appearance **Label Colors:** - Use Custom Sum Colors: OFF (default) - Uses session colors - OR Enable to use: Blue (3), Red (6), Maroon (9) **Display Settings:** - Label Transparency: Adjust as needed - Show Time Text: Optional - Show Cycle Information: Optional - Show Debug Table: ✅ (recommended for monitoring) Step 4: Set Timezone **General Settings:** - Session Timezone: Select your timezone (default: GMT-5) - Choose from 27 timezone options Step 5: Monitor Labels - Labels will automatically appear when: - Time sum equals 3, 6, or 9 - Current time is within an active session - Drawing limit allows it 💡 Use Cases 1. Market Timing Entries Use 3, 6, 9 labels as potential entry signals when combined with other technical analysis: - Wait for label to appear - Confirm with price action - Enter trade with proper risk management 2. Session Analysis Identify optimal trading times within sessions: - Monitor which sessions show most labels - Track label frequency per session - Plan trading around high-frequency periods 3. Cycle Recognition Understand market rhythm patterns: - 90-minute cycles for major moves - 30-minute cycles for intermediate moves - 10-minute cycles for precise timing 4. Time-Based Confirmation Use labels to confirm other indicators: - Combine with price action - Use with support/resistance levels - Confirm with volume analysis ⚙️ Settings Overview Time Sum Settings - **Enable Time Sum Detection**: Master switch for the indicator - **Target Sums**: Comma-separated list of target values (default: "3,6,9") - **Label Size**: Size of displayed labels - **Show Time Text**: Display time along with sum - **Show Cycle Information**: Display cycle type (90m, 30m, 10m) - **Drawing Limit**: Limit labels to specific time periods - **Show Debug Table**: Real-time monitoring table - **Only Show on Confirmed Bars**: Wait for bar confirmation Session Settings - **Monitor London Session**: Enable/disable London session (02:30-07:00) - **Monitor NY AM Session**: Enable/disable NY AM session (07:00-11:30) - **Monitor NY PM Session**: Enable/disable NY PM session (11:30-16:00) Cycle Settings - **90 Minute Cycles**: Enable 90-minute cycle detection - **30 Minute Cycles**: Enable 30-minute cycle detection - **10 Minute Cycles**: Enable 10-minute cycle detection Display Settings - **Label Transparency**: Control label background transparency Label Colors - **Color for Sum 3**: Custom color for sum = 3 - **Color for Sum 6**: Custom color for sum = 6 - **Color for Sum 9**: Custom color for sum = 9 - **Use Custom Sum Colors**: Toggle between custom and session colors General Settings - **Session Timezone**: Select timezone for calculations (27 options) - **Swing Sensitivity**: Bars for swing detection - **Label Offset**: Vertical spacing for labels 🔍 Debug Table The debug table provides real-time information: - **Time**: Current time with seconds - **Sum**: Calculated time sum - **Session**: Active session (London, NY AM, NY PM, or None) - **Cycle**: Active cycle (90min, 30min, 10min, or None) - **Status**: Match status (MATCH! or No Match) - **Targets**: Configured target sums - **Next**: Next potential sum value Enable the debug table to monitor the indicator's calculations in real-time. 📊 Examples Example 1: Perfect 6 **Time**: 03:30 **Calculation**: 0 + 3 + 3 + 0 = 6 **Result**: Label "6" appears (if in active session) Example 2: Perfect 9 **Time**: 12:06 **Calculation**: 1 + 2 + 0 + 6 = 9 **Result**: Label "9" appears (if in active session) Example 3: Reduced to 6 **Time**: 09:51 **Calculation**: 0 + 9 + 5 + 1 = 15 → 1 + 5 = 6 **Result**: Label "6" appears (if in active session) Example 4: Reduced to 3 **Time**: 11:10 **Calculation**: 1 + 1 + 1 + 0 = 3 **Result**: Label "3" appears (if in active session) 🎨 Visual Features Label Display - **Text Only**: Clean text labels without background boxes - **Color Coded**: Different colors for different sums or sessions - **Smart Positioning**: Labels positioned above/below candles based on swing detection - **Adaptive Offset**: Automatic spacing to avoid overlap Session Colors (Default) - **London Session**: Purple labels - **NY AM Session**: Green labels - **NY PM Session**: Blue labels Custom Colors (Optional) - **Sum 3**: Blue - **Sum 6**: Red - **Sum 9**: Maroon 📜 License & Attribution **Copyright**: © 2025 ThiruDinesh **License**: Mozilla Public License 2.0 **Contact**: TradingView @ThiruDinesh This indicator is based on mathematical principles of numerical reduction and harmonic numbers, concepts popularized by Nikola Tesla and used in various trading methodologies.
Pine Script®指標
由thirudinesh提供
1