立即開始

圖表形態

📱 Mobile EMA + Trendline Bias (edegrano)📱 Mobile EMA + Trendline Bias (edegrano) — User Manual Purpose This indicator provides a simplified, mobile-friendly overview of trend bias using EMA and multi-timeframe regression trendline confluences, plus plots EMA lines and a small info table on the chart. Inputs Explained Input Name Description Custom EMA Timeframe The timeframe on which the EMA 50 and EMA 200 calculations are based (e.g., 1, 3, 5 minutes). This lets you choose which timeframe to analyze EMA trend bias. Show EMAs on Chart Toggle to show or hide EMA 50 (blue) and EMA 200 (red) lines on your chart. Regression Length The length (number of bars) used for calculating the linear regression trendlines on fixed 1m, 3m, and 5m timeframes. Lower values make trendlines more reactive, higher values smooth out noise. Show EMA 50 Bias Row Show or hide the EMA 50 vs EMA 200 bias row in the info table. Show Trendline Slope Row Show or hide the multi-timeframe trendline slope bias row in the info table. What It Shows EMA Lines: EMA 50 (blue) and EMA 200 (red) based on your selected timeframe. Trendline Slopes: Using linear regression on 1-minute, 3-minute, and 5-minute charts to gauge short-term trend direction. Info Table (Bottom Left): EMA 50 > EMA 200 status on your selected timeframe (Bullish/Bearish) Trendline slope bias combining the 3 fixed timeframes (Bullish/Bearish/Neutral) Final Suggestion showing overall bias: Strong Buy 💎 if both EMA and trendline biases are bullish Strong Sell 💎 if both are bearish Mixed / Neutral otherwise Tag on Chart Corner: Displays “📱 edegrano Mobile” label for quick identification. How To Use Set the Custom EMA Timeframe: Choose a timeframe that fits your trading style (e.g., 1m for scalping, 5m for day trading). Adjust Regression Length: For faster signals, lower the regression length (e.g., 15). For smoother, less noisy signals, increase it (e.g., 30 or higher). Toggle EMA Lines Display: Show or hide EMA lines based on your preference for chart clarity. Use the Info Table: Quickly glance at EMA and trendline bias across timeframes for confluence confirmation. Interpret the Final Suggestion: Follow “Strong Buy” or “Strong Sell” signals for potential entry points. If “Mixed / Neutral,” wait for stronger confirmation. Suggested Parameters by Trading Style Style EMA Timeframe Regression Length Notes Scalping 1 min 15-20 Responsive, fast reaction to price Day Trading 3-5 min 20-30 Balanced sensitivity Swing Trading 15-30 min 30-50 Smoother trend detection Position Trading 1 hr+ 50-100 Very smooth, low noise Tips Combine this indicator with volume or other indicators for stronger confirmation. Use the EMA lines on chart visually to confirm trend direction. The info table updates in real-time, making it easy for quick decisions on mobile. Adjust inputs and observe how the final suggestion changes to tune for your asset and timeframe.
Pine Script®指標
由edegrano提供
Volume Profile (Simple)Simple Volume Profile (Simple) Master the Market's Structure with a Clear View of Volume by mercaderoaurum The Simple Volume Profile (Simple) indicator removes the guesswork by showing you exactly where the most significant trading activity has occurred. By visualizing the Point of Control (POC) and Value Area (VA) for today and yesterday, you can instantly identify the price levels that matter most, giving you a critical edge in your intraday trading. This tool is specifically optimized for day trading SPY on a 1-minute chart, but it's fully customizable for any symbol or timeframe. Key Features Multi-Day Analysis: Automatically plots the volume profiles for the current and previous trading sessions, allowing you to see how today's market is reacting to yesterday's key levels. Automatic Key Level Plotting: Instantly see the most important levels from each session: Point of Control (POC): The single price level with the highest traded volume, acting as a powerful magnet for price. Value Area High (VAH): The upper boundary of the area where 50% of the volume was traded. It often acts as resistance. Value Area Low (VAL): The lower boundary of the 50% value area, often acting as support. Extended Levels: The POC, VAH, and VAL from previous sessions are automatically extended into the current day, providing a clear map of potential support and resistance zones. Customizable Sessions: While optimized for the US stock market, you can define any session time and time zone, making it a versatile tool for forex, crypto, and futures traders. Core Trading Strategies The Simple Volume Profile helps you understand market context. Instead of trading blind, you can now make decisions based on where the market has shown the most interest. 1. Identifying Support and Resistance This is the most direct way to use the indicator. The extended lines from the previous day are your roadmap for the current session. Previous Day's POC (pPOC): This is the most significant level. Watch for price to react strongly here. It can act as powerful support if approached from above or strong resistance if approached from below. Previous Day's VAH (pVAH): Expect this level to act as initial resistance. A clean break above pVAH can signal a strong bullish trend. Previous Day's VAL (pVAL): Expect this level to act as initial support. A firm break below pVAL can indicate a strong bearish trend. Example Strategy: If SPY opens and rallies up to the previous day's VAH and stalls, this is a high-probability area to look for a short entry, with a stop loss just above the level. 2. The "Open-Drive" Rejection How the market opens in relation to the previous day's value area is a powerful tell. Open Above Yesterday's Value Area: If the market opens above the pVAH, it signals strength. The first pullback to test the pVAH is often a key long entry point. The level is expected to flip from resistance to support. Open Below Yesterday's Value Area: If the market opens below the pVAL, it signals weakness. The first rally to test the pVAL is a potential short entry, as the level is likely to act as new resistance. 3. Fading the Extremes When price pushes far outside the previous day's value area, it can become overextended. Reversal at Highs: If price rallies significantly above the pVAH and then starts to lose momentum (e.g., forming bearish divergence on RSI or a topping pattern), it could be an opportunity to short the market, targeting a move back toward the pVAH or pPOC. Reversal at Lows: Conversely, if price drops far below the pVAL and shows signs of bottoming, it can be a good opportunity to look for a long entry, targeting a reversion back to the value area. Recommended Settings (SPY Intraday) These settings are the default and are optimized for scalping or day trading SPY on a 1-minute chart. Value Area (%): 50%. This creates a tighter, more sensitive value area, perfect for identifying the most critical intraday zones. Number of Rows: 1000. This high resolution is essential for a low-volatility instrument like SPY, ensuring that the profile is detailed and the levels are precise. Session Time: 0400-1800 in America/New_York. This captures the full pre-market and core session, which is crucial for understanding the day's complete volume story. Ready to trade with an edge? Add the Simple Volume Profile (Multi-Day) to your chart now and see the market in a new light!
Pine Script®指標
由MercaderoAurum提供
SMC Breaker+Liquidity + HTF EMA — v61️⃣ Core Idea This is a Smart Money Concept (SMC) It looks for liquidity sweeps followed by price moving back in the opposite direction (breaker block behavior), while trading only in the direction of the higher timeframe (HTF) trend. 2️⃣ Components A. Higher Timeframe EMA Bias We take an EMA (default length: 50) from a higher timeframe (default: 4H). If price is above that EMA → bias is bullish (we only take longs). If price is below that EMA → bias is bearish (we only take shorts). This keeps trades aligned with the bigger picture trend B. Liquidity Sweep Detection We find the highest high and lowest low over the past 5 bars A sweep high happens when: Price breaks above a recent high (liquidity grab), but Closes back below it (false breakout). A sweep low happens when: Price breaks below a recent low, but Closes back above it. This indicates stop hunting — whales often trigger these before reversing price. C. Breaker Block Logic If a sweep low occurs and bias is bullish → BUY. If a sweep high occurs and bias is bearish → SELL. D. Optional ADX Filter ADX checks market strength (trendiness). If enabled, it only trades when ADX > threshold (default 20). This avoids ranging/choppy markets. 3️⃣ Risk Management Stop Loss (SL): For longs → ATR(14) below the entry candle low. For shorts → ATR(14) above the entry candle high. Take Profit (TP): SL distance × Risk:Reward ratio (default 3:1). This means every win can be 3x bigger than a loss.
Pine Script®策略
由nadeem0014提供
MNQ Gap-Fade (ETH) — RTH 08:30–15:00 CT, +/-3m refsStrategy overview This strategy tests a gap-fade idea on MNQ when trading an ETH chart but referencing RTH timing. It measures the overnight move from 3 minutes before the prior RTH close (14:57 CT) to 3 minutes after today’s RTH open (08:33 CT). If that gap is big enough, it bets on mean reversion at the open: Short after a large gap up Long after a large gap down How it works Sampling windows (RTH, Chicago time): Prev close sample: the 14:57 bar (3 min before 15:00 close) Open sample: the 08:33 bar (3 min after 08:30 open) These offsets help avoid opening/closing bar noise and ensure the bars have formed. Overnight % move: (OpenSample−PrevCloseSample)/PrevCloseSample × 100 Signals (at 08:33 pulse): If gap % ≥ Gap-Up threshold → enter SHORT If gap % ≤ −Gap-Down threshold → enter LONG Risk management: Per-trade TP and SL as percentages from entry (both adjustable) If still in a position at 14:57, the strategy forces flat (closes all) before the RTH close Plots & visibility: Plots the computed Overnight Gap % line Horizontal lines at your Gap-Up and Gap-Down thresholds for quick visual checks Alerts: alertcondition() events fire on: the open-sample ready pulse, gap-up short, and gap-down long conditions (Pine requires static alert messages; the % gap itself is visible on the chart.) Inputs you can adjust Times (CT): RTH open/close and the ±3 min offsets (use different values if desired) Gap thresholds (%): separate values for gap-up (short) and gap-down (long) Take-profit / Stop-loss (%): per-side percentage targets from average entry price Instrument & session notes Designed for MNQ; works on an ETH chart while internally referencing CME/Chicago (CT) RTH times via 1-minute sampling. If you prefer different markets or exact ET timestamps, change the time inputs accordingly. Assumptions & limitations This is a research/backtest tool for a simple gap-fade rule, not a complete trading system. Slippage, fills, and overnight liquidity may differ from backtest assumptions. Mean reversion can fail on trend days and during news events; use filters or wider thresholds if needed. That should be everything reviewers and users need to understand what it does and how to tune it. Want me to add a short “Suggested defaults” block (e.g., 0.75–1.25% gaps, 1% TP/SL) or a “Known gotchas” section for ETH vs. RTH charts? Ask ChatGPT
Pine Script®策略
由hargo1980提供
💎💎💎 We are the Masters- by edegrano-Donna-Leah 2How to Use the "💎💎💎 We are the Masters" Script 1. Set Your Timeframes EMA Timeframes (emaTF1, emaTF2, emaTF3): Choose 3 different chart timeframes on which you want to analyze the EMA bias. These timeframes will determine how the script evaluates the market trend via EMAs. Trendline Timeframes (tf1, tf2, tf3): Choose 3 timeframes for the linear regression trendlines. These smooth out price action and indicate the trend slope. 2. Set Linear Regression Length (regLen) This controls the length (number of bars) the linear regression trendline uses to calculate the trend. Smaller values make the trendline more sensitive; higher values smooth out noise but react slower. 3. Interpret the Output EMA Bias per Timeframe: Bullish if EMA 50 > EMA 200 on that timeframe. Bearish if EMA 50 < EMA 200. Trendline Slope per Timeframe: Bullish if current regression value > previous regression value (price is trending up). Bearish if current regression value ≤ previous regression value. Special Buy Signal: When all 3 EMA biases are bullish AND all 3 trendline slopes are bullish → Strong Buy Signal (blue dot below bar). Special Sell Signal: When all 3 EMA biases are bearish AND all 3 trendline slopes are bearish → Strong Sell Signal (red dot above bar). EMA Crosses: The script plots vertical lines and labels on the current timeframe when EMA 50 crosses above (bullish) or below (bearish) EMA 200. Information Table: Shows EMA bias and trendline slope status for all timeframes, last EMA cross info, and final overall suggestion. 4. How to Use in Trading Confirm Trend: Use the EMA bias and trendline slope confluences to confirm the overall trend across multiple timeframes. Trade Entry: Consider entering long when the special buy signal appears; enter short when the special sell signal appears. EMA Crosses: Use crosses as secondary confirmation or to detect early momentum shifts. Trendline Slope: Helps confirm if the price is gaining or losing strength on different timeframes. Monitor Table: Quickly glance to understand current market bias and confluence. Suggested Parameters for Different Trading Styles Style EMA Timeframes Trendline Timeframes Linear Regression Length (regLen) Scalping 1 min, 3 min, 5 min 1 min, 3 min, 5 min 15 - 20 (responsive, fast) Day Trading 5 min, 15 min, 30 min 5 min, 15 min, 30 min 20 - 30 (balanced responsiveness) Swing Trading 1 hr, 4 hr, Daily 1 hr, 4 hr, Daily 30 - 50 (smoother, slower trend) Position Trading 4 hr, Daily, Weekly 4 hr, Daily, Weekly 50 - 100 (very smooth) Tips When using short timeframes, keep the regression length smaller for quicker reaction to price changes. For longer timeframes, increase regression length to reduce noise and false signals. Use this script alongside volume or other indicators to improve entry quality. Avoid trading against the overall confluence bias (e.g., don’t enter longs if final suggestion is “Strong Bearish”).
Pine Script®指標
由edegrano提供
SM Trap Detector – Liquidity Sweeps & Institutional ReversalsOverview: This script is designed to help traders detect Smart Money traps, liquidity grabs, and false breakouts with high precision. Inspired by institutional trading logic (SMC, ICT, Wyckoff), this tool combines: 🟦 Liquidity Zone Mapping – Detects stop hunt targets near highs/lows 🚨 Trap Candle Detection – Identifies fakeouts using wick + volume logic ✅ Reversal Confirmation – Entry signals based on real market structure 🧭 Dashboard Panel – Always see the last trap type, price, and confirmation 🔔 Real-Time Alerts – Stay notified of traps and entry points 🧠 Logic Breakdown: Trap Candle = Large wick, small body, volume spike, and sweep of a liquidity zone Confirmed Entry = Reversal price action following the trap (engulfing-style) 📈 Best Used On: Markets: Crypto, Forex, Stocks Timeframes: No limitation but works best on 1H, 4H, Daily 🛠 Suggested Use: Trade only confirmed entries for best results Place stops beyond wick highs/lows Target previous structure or use RR-based exits 📊 Backtest Tip: Use alerts + replay mode to manually validate past traps. Note: Please backtest before using it for entry.
Pine Script®指標
由friendlyRox提供
1
Detector Mecha Profunda M20This indicator identifies a high-probability "Deep Wick Pattern" based on candlestick structure and volume analysis, filtered by the 20-period simple moving average (SMA). A buy signal is generated when the candle has a long lower wick, closes above the previous low, shows bullish structure, and is confirmed by increasing volume — all while the price is trading above the 20 SMA. A sell signal appears under the opposite conditions: a long upper wick, bearish candle closing below the previous high, with increased volume, and price trading below the 20 SMA. This tool helps traders spot potential reversals or continuations with added confirmation from trend direction and volume.
Pine Script®指標
由THEGREATNAPLESTRADERX提供
Detector Mecha Profunda M20This indicator identifies a high-probability "Deep Wick Pattern" based on candlestick structure and volume analysis, filtered by the 20-period simple moving average (SMA). A buy signal is generated when the candle has a long lower wick, closes above the previous low, shows bullish structure, and is confirmed by increasing volume — all while the price is trading above the 20 SMA. A sell signal appears under the opposite conditions: a long upper wick, bearish candle closing below the previous high, with increased volume, and price trading below the 20 SMA. This tool helps traders spot potential reversals or continuations with added confirmation from trend direction and volume.
Pine Script®指標
由THEGREATNAPLESTRADERX提供
RSI (14) with Auto Zone Colors — Overbought/Oversold HighlighterThis indicator plots the Relative Strength Index (RSI 14) with dynamic color changes for instant visual clarity: ✅ Green line in overbought zone (≥70) ✅ Red line in oversold zone (≤30) ✅ White line in neutral range (30–70) Includes reference lines at 70, 50, and 30 for quick decision-making. Perfect for spotting momentum extremes, divergences, and potential reversal points without squinting at numbers. Works on any timeframe.
Pine Script®指標
由tarangbharti18提供
KIT_ALL_VOTE_INDICADORIndicator developed to consolidate and display the voting results of multiple neural networks in real time on the chart. It calculates the number of buy and sell signals from various AI instances and presents a consolidated view to assist in decision-making. Ideal for algorithmic trading strategies and monitoring EAs that use voting logic. Main features: Displays the total count of buy and sell votes on the chart. Automatically updates on each new candle or tick. Can be used together with the SuperNeural1 EA or other systems based on voting. Recommended asset: XAUUSD or any pair with high volatility. Suggested timeframe: M1 to H1.
Pine Script®指標
由cristiano_hashioka提供
UNITY[ALGO] PO3 V3Of course. Here is a complete and professional description in English for the indicator we have built, detailing all of its features and functionalities. Indicator: UNITY PO3 V7.2 Overview The UNITY PO3 is an advanced, multi-faceted technical analysis tool designed to identify high-probability reversal setups based on the Swing Failure Pattern (SFP). It combines real-time SFP detection on the current timeframe with a sophisticated analysis of key institutional liquidity zones from the H4 timeframe, presenting all information in a clear, dynamic, and interactive visual interface. This indicator is built for traders who use liquidity concepts, providing a complete dashboard of entries, targets, and invalidation levels directly on the chart. Core Features & Functionality 1. Swing Failure Pattern (SFP) Detection (Current Timeframe) The indicator's primary engine identifies SFPs on the chart's active timeframe with two layers of logic: Standard SFP: Detects a classic liquidity sweep where the current candle's wick takes out the high or low of the previous candle and the body closes back within the previous candle's range. Outside Bar SFP Logic: Intelligently analyzes engulfing candles that sweep both the high and low of the previous candle. A valid signal is only generated if the candle has a clear directional close: Bullish Signal: If the outside bar closes higher than its open. Bearish Signal: If the outside bar closes lower than its open. Neutral (doji-like) outside bars are ignored to filter for indecision. 2. Comprehensive On-Chart SFP Markings When a valid SFP is detected, a full suite of dynamic drawings appears on the chart: Failure Line: A dashed line (red for bearish, green for bullish) marking the precise price level of the liquidity sweep. PREMIUM ZONE (SFP Candle Wick): A transparent, colored rectangle highlighting the rejection wick of the signal candle (the upper wick for bearish SFPs, the lower wick for bullish SFPs). This zone automatically extends to the right, following the current price, until the DOL is hit. CRT BOX (Reference Candle): A transparent box with a colored border drawn around the entire range of the candle that was swept (Candle 1). This highlights the full liquidity zone and also extends dynamically until the DOL is hit. Dynamic Target Line: A blue dashed line marking the primary objective (the low of the signal candle for shorts, the high for longs). The line begins with a "⏳ Target" label and extends with the current price. Upon being touched by price, the line freezes, and its label permanently changes to "✅ Target". Dynamic DOL (Draw on Liquidity) Line: An orange dashed line marking the invalidation level, defined as the opposite extremity of the swept candle (Candle 1). It begins with a "⏳ dol" label and extends with the price. Upon being touched, it freezes, and its label changes to "✅ dol". 3. Multi-Session Killzone Liquidity Levels (H4 Analysis) The indicator automatically analyzes the H4 timeframe in the background to identify and plot key liquidity levels from three major trading sessions, based on their UTC opening times. 1am Killzone (London Lunch): Tracks the high/low of the 05:00 UTC H4 candle. 5am Killzone (London Open): Tracks the high/low of the 09:00 UTC H4 candle. 9am Killzone (NY Open): Tracks the high/low of the 13:00 UTC H4 candle. For each of these Killzones, the indicator provides two types of analysis: Last KZ Lines: Plots the high and low of the most recent qualifying Killzone candle. These lines are dynamic, extending with price and showing a ⏳/✅ status when touched. Fresh Zones: A powerful feature that scans the entire available history of Killzones to find and display the closest untouched high (above the current price) and the closest untouched low (below the current price). These "Fresh" lines are also fully dynamic and provide a real-time view of the most relevant nearby liquidity targets. 4. Advanced User Settings & Chart Management The indicator is designed for a clean and user-centric experience with powerful customization: Show Only Last SFP: Keeps the chart clean by automatically deleting the previous SFP setup when a new one appears. Hide SFP on DOL Reset: When checked, automatically removes all drawings related to an SFP setup the moment its invalidation level (DOL line) is touched. This leaves only active, valid setups on the chart. Hide Consumed KZ: When checked, automatically removes any Killzone or Fresh Zone line from the chart as soon as it is touched by the price. Independent Toggles: Every visual element—SFP signals, each of the three Killzones, and their respective "Fresh" zone counterparts—can be turned on or off independently from the settings menu for complete control over the visual display. Z-Order Priority: All indicator drawings are rendered in front of the chart candles, ensuring they are always clearly visible and never hidden from view.
Pine Script®指標
由JoeUnity提供
1
Trident Pattern [SpeculationLab]This indicator is based on the increasingly popular Trident strategy, and is best suited for the 30-minute timeframe. It performs particularly well on naturally bullish instruments such as gold, Bitcoin, and Nasdaq.All components of this indicator are original work by Speculation Lab. Rather than stacking random features, this script is designed as a modular structure where each part works in synergy to build the Trident logic. 🔧 Modules Included: Session Highlight — Visual display of the London Kill Zone 5 Customizable EMAs — Fully adjustable length, color, and toggling Bullish Fair Value Gap (FVG) detection Four types of Doji candlestick recognition 🧫 Logic Breakdown: 1. Time Session Filter By default, the indicator highlights the London Kill Zone, defined as 03:00–06:30 New York time.Users can freely adjust the time zone, time range, and background color, with preconfigured zones including New York, London, Tokyo, Shanghai, and Sydney. ⚠️ Note: To maintain flexibility, the London Kill Zone is not enforced as a mandatory entry condition. Users may apply it as an optional filter based on their own trading style. 2. 5 EMA Trend Filter The script uses a five-EMA structure to confirm market trend.The default EMA lengths are 5, 9, 13, 21, and 200.A valid entry requires: EMAs 5, 9, 13, 21 stacked in descending order AND the 1-hour close is above EMA(200) All EMAs are fully customizable and can be toggled on/off. 3. Bullish Fair Value Gap (FVG) Bullish FVGs are detected using a 3-bar logic, from high to low .To filter noise, the gap must be greater than 0.7 × ATR(14) by default.Both the ATR period and multiplier are adjustable. The FVG Extend setting has two roles: It controls how many bars the FVG box extends to the right (default: 20) It defines the active window for confirming entries within the FVG zone Users can fully customize the box color, text, and center line. 4. Doji Detection The script detects four types of Doji candlesticks: Standard Doji Long-legged Doji Dragonfly Doji Gravestone Doji The Body Ratio setting controls how small the candle body must be relative to the full range (default ≤ 0.1).Long Wick Ratio and Short Wick Ratio further help fine-tune wick length criteria. ✅ Entry Signal Logic: A Trident entry is confirmed when all the following conditions are met: Trend Filter Passes EMAs are stacked: 5 > 9 > 13 > 21 1H close is above EMA(200) A Doji candle appears inside an active FVG zone The next candle closes below the Doji’s high If all conditions are satisfied, a Trident signal is triggered at the close of the confirming candle. ⚠️ Disclaimer This indicator is intended for educational and research purposes only. It does not constitute financial advice or trading signals.Trading involves high risk. Please act according to your own risk management.Speculation Lab and the author bear no responsibility for any financial outcomes resulting from the use of this script. 本指标基于近年来日益流行的 Trident（三叉戟）策略，推荐使用在 30分钟时间框架，尤其适用于黄金、比特币、纳斯达克等具有自然上涨倾向的交易品种。本指标由 Speculation Lab 原创开发，结构严谨，逻辑清晰。 本指标采用模块化设计，各部分功能相辅相成，共同构建三叉戟策略逻辑，而非杂乱堆砌。 🔧 指标包含以下功能模块： 交易时段高亮 — 默认显示 伦敦杀戮区 五条可调节 EMA 均线 — 长度与颜色可自定义，模块可单独开关 看涨 Fair Value Gap（公平价值缺口）检测 四种 Doji（十字星）K线形态识别 🧫 逻辑说明： 1. 交易时段过滤 默认高亮显示的伦敦杀戮区为 纽约时间03:00–06:30。用户可自由调整 参考时区、具体时段和 背景颜色，支持预设时区包括纽约、伦敦、东京、上海和悉尼。 ⚠️ 说明：为保持策略灵活性，伦敦杀戮区并非强制入场条件。 是否采用此过滤，可由用户自行决定。 2. 趋势过滤（五条EMA） 该指标采用五条 EMA 来确认市场趋势。默认长度为 5、9、13、21、200。入场信号要求满足以下条件： EMA 5、9、13、21 从上到下依次排列（多头排列） 且 1小时图上的收盘价高于 EMA200 所有均线均可单独启用/关闭，长度与颜色均可自定义。 3. 看涨 FVG 区域识别 FVG 使用 3 根K线结构进行检测，从 high 到 low 。默认要求缺口 大于等于 0.7 × ATR(14)，以过滤微小无效缺口。ATR周期与乘数均可自定义设置。 “FVG Extend”参数有两个作用： 控制图表上 FVG 区域箱体的右延伸长度（默认20根K线） 用作 FVG 活跃期的判断标准，仅在此区间内出现的 Doji 才会被视为有效信号触发条件 用户可自由设置 FVG 的背景颜色、文字样式与中线颜色。 4. Doji（十字星）识别 支持以下四种常见 Doji 形态识别： 标准十字星 长腿十字星 蜻蜓线（下影线长） 墓碑线（上影线长） “Body Ratio” 控制实体占K线全长的比例，默认不超过0.2。“Long Wick Ratio” 与 “Short Wick Ratio” 可进一步调节影线长度识别标准。 ✅ 入场信号逻辑： 符合以下所有条件时，触发三叉戟入场信号： 趋势过滤通过 EMA 依次排列为 5 > 9 > 13 > 21 且 1小时收盘价高于 EMA200 在 FVG 区域内出现有效 Doji 十字星 下一根K线收盘价 低于 Doji 的最高价 若以上条件均满足，则在确认K线收盘时触发三叉戟入场信号。 ⚠️ 免责声明 Disclaimer 本指标旨在提供技术分析工具，仅用于教育与研究目的，不构成任何投资建议或交易指令。交易具有高风险，请根据自身风险承受能力合理操作。使用本脚本所导致的任何盈亏，作者与 Speculation Lab 不承担任何责任。
Pine Script®指標
由SpeculationLab提供
3
anand ha + RsiHow it works: Green Line: When RSI > 50 AND Heikin Ashi is bullish (uptrend) Red Line: When RSI < 50 AND Heikin Ashi is bearish (downtrend) The line dynamically positions itself below price during uptrends and above price during downtrends Uses ATR to maintain appropriate distance from price action Includes subtle background fill between price and the trend line Key Features: Single clean trend line (no candles, no extra indicators) Color changes based on trend direction Self-adjusting position using ATR Smooth transitions to avoid whipsaws Minimal visual clutter, just like SuperTrend The line will stay green below price when both RSI is above 50 and Heikin Ashi shows bullish momentum, and red above price when both conditions turn bearish. This gives you a clear visual trend following system in a simple line format.
Pine Script®指標
由ramrajenterprises提供
Gelişmiş Mum Ters StratejiAdvanced Candle Reversal Strategy Overview This TradingView PineScript indicator detects potential reversal signals in candlestick patterns, focusing on a sequence of directional candles followed by a wick-based reversal candle. Here's a step-by-step breakdown: User Inputs: candleCount (default: 6): Number of consecutive candles required (2–20). wickRatio (default: 1.5): Minimum wick-to-body ratio for reversal (1.0–5.0). Options to show background colors and an info table. Candle Calculations: Computes body size (|close - open|), upper wick (high - max(close, open)), and lower wick (min(close, open) - low). Identifies bullish (close > open) or bearish (close < open) candles. Checks for long upper wick (≥ body * wickRatio) for short signals or long lower wick for long signals. Sequence Check: Verifies if the last candleCount candles are all bearish (for long signal) or all bullish (for short signal), including the current candle. Signal Conditions: Long Signal: candleCount bearish candles + current candle has long lower wick (plotted as green upward triangle below bar with "LONG" text). Short Signal: candleCount bullish candles + current candle has long upper wick (plotted as red downward triangle above bar with "SHORT" text). Additional Features: Alerts for signals with custom messages. Optional translucent background color (green for long, red for short). Plots tiny crosses for long wicks not triggering full signals (yellow above for upper, orange below for lower). Info table (top-right): Displays strategy summary, candle count, and signal explanations. Debug label: On signals, shows wick/body ratio above the bar. The strategy aims for reversals after trends (e.g., after 6 red candles, a red candle with long lower wick signals buy). Customize via inputs; backtest for effectiveness. Not financial advice.
Pine Script®指標
由EfeErdost提供
LANZ Strategy 7.0🔷 LANZ Strategy 7.0 — Multi-Session Breakout Logic with Midnight-Cross Support, Dynamic SL/TP, Multi-Account Lot Sizing & Real-Time Visual Tracking LANZ Strategy 7.0 is a robust, visually-driven trading indicator designed to capture high-probability breakouts from a customizable market session. It includes full support for sessions that cross midnight, dynamic calculation of Entry Price (EP), Stop Loss (SL) and Take Profit (TP) levels, and a multi-account lot sizing panel for precise risk management. The system is built to only trigger one trade per day and manages the full trade lifecycle with automated visual cleanup and detailed alerts. 📌 This is an indicator, not a strategy — it does not place trades automatically, but provides exact entry setups, SL/TP levels, risk-based lot size guidance, and real-time alerts for execution. 🧠 Core Logic & Features 🚀 Entry Signal (BUY/SELL) The trading day begins with a Decision Session (yellow box) where the high/low range is recorded. Once the Operative Session starts (blue zone), the first touch of the session’s high triggers a BUY setup, and the first touch of the session’s low triggers a SELL setup. Only one valid trade can be triggered per day — the system locks after the first signal. ⚙️ Dynamic Stop Loss & Take Profit SL levels are derived from the Decision Session high/low using customizable Fibonacci multipliers (independent for BUY and SELL). TP is dynamically calculated from the EP–SL distance using a user-defined Risk:Reward ratio (R:R). All EP, SL, and TP levels are drawn as independent lines with customizable colors, label text size, and style. ⏳ Session & Midnight-Cross Support Works with any custom Decision/Operative session hours, including sessions that start one day and end the next. Properly tracks time zones using New York session time for consistency. Includes Cutoff Time: after this limit, no new entries are allowed, and all visuals are auto-cleared if no trade was triggered. 💰 Multi-Account Risk-Based Lot Sizing Supports up to 5 independent accounts. Each account can have: Own capital Own risk percentage per trade Lot size is auto-calculated based on: SL distance (in pips or points) Pip value (auto-detected for Forex or manually set for indices/commodities) Results are displayed in a clean lot size info panel. 🖼️ Real-Time Visual Tracking Dynamic updates to all levels during the Decision Session. EP, SL, TP lines update if the session high/low changes before the Operative Session starts. Trade result labels: SL hit → “–1.00%” in red TP hit → “+X.XX%” in green Manual close at Operative End → shows actual % result in blue or purple. 🔔 Alerts for Every Key Event Session start notification EP entry triggered SL or TP hit Manual close at session end Missed entry due to cutoff 🧭 Execution Flow Decision Session (Yellow) — Capture high/low range. Operative Session (Blue) — First touch of high = BUY setup; first touch of low = SELL setup. Plot EP, SL, TP lines + calculate lot sizes for all active accounts. Track trade until SL, TP, or Operative End. If no entry triggered by Cutoff Time → clean all visuals and notify. 💡 Ideal For: Traders who operate breakout logic on specific sessions (NY, London, Asian, or custom). Those managing multiple accounts with strict risk per trade. Anyone trading assets with sessions crossing midnight. 👨‍💻 Credits: Developer: LANZ Logic Design: LANZ Built For: Multi-timeframe session breakouts with high precision. Purpose: One-shot trade per day, risk consistency, and total visual clarity.
Pine Script®指標
由rau_u_lanz提供
Regime KaleidoscopeWhat is Regime Kaleidoscope? Regime Kaleidoscope is an advanced market regime visualizer and adaptive signal generator. It helps traders instantly understand whether current market conditions are best for mean-reversion (fading price back to the mean) or breakout/trend-following (riding strong moves), using a data-driven, non-repainting approach. How It Works 1. Regime Detection & Background Colors The indicator analyzes both volatility (ATR) and the shape of each candle (body size vs. range) over a rolling window. Each bar is classified into one of three regimes, and the chart’s background color changes accordingly: Regime Background Color What It Means How to Use Low Vol Balanced Green background Market is calm, compressed. More likely to revert back to mean. Look for mean-reversion signals only (fade moves). High Vol Directional Red background Market is in a high-volatility, trending, or “breakout” state. Red does NOT mean bearish. It simply means conditions are ripe for strong directional moves—either up or down. Look for breakout signals only (ride strong moves after structure break). Chop Gray background Market is indecisive or transitioning between states. Signals are minimized or blocked. Best to wait or trade with extra caution. → Red background means high volatility/trending regime, not a signal direction! Green means “mean-revert environment,” not always bullish! Gray means “chop/transition”—usually best avoided. 2. Signals — How to Read and Trade Them Mean-Reversion Signals (Green Regime Only): Appear when price is stretched away from a rolling mean (SMA) by a configurable ATR-based threshold. Optional: Only allowed in the direction of the higher-timeframe trend, if enabled. Long signals: Fade extreme dips (look for triangle-up shapes & green labels). Short signals: Fade extreme spikes (triangle-down shapes & red labels). Labels show signal strength (distance from mean in ATR units). Breakout Signals (Red Regime Only): Only triggered when price breaks above or below a confirmed swing high or low (pivot), with a strong candle and optional trend confirmation. Long signals: Breakout above last swing high (regardless of background color). Short signals: Breakout below last swing low. Labels show signal strength (distance from pivot in ATR units). Red background does NOT mean sell— it means “trend environment”—so both long and short signals are possible, depending on which direction price is breaking out. Signal Controls & Filtering: Signals only fire at bar close (non-repainting), never intrabar or on future data. ATR “floor” blocks signals when volatility is too low for meaningful moves. Cooldown: Signals are limited to one per regime per direction for a minimum number of bars (user input). Optional confirmation candles: Only strong reversals or breakouts count, reducing noise and whipsaws. All signals are visible as triangle shapes below/above bars, and labeled with strength. 3. Visual Guide Background color: Maps the regime, not buy/sell direction. Transition label: Appears only when the regime changes, so you can see state shifts at a glance. Triangle shapes & labels: Mark entry points; label gives strength. Info table (optional): Shows regime and ATR at transitions. Why is Regime Kaleidoscope Unique? Uses rolling statistical percentiles of ATR and candle body shape for dynamic market state detection—not just a moving average or volatility band. Separates regime from signal direction, so you always know “what mode the market is in” and when signals actually have a higher probability. No repainting. All logic is strictly bar-close, confirmed pivots, and non-future-leaking. Highly customizable—all thresholds, filters, trend confirmation, and cooldown are user inputs. How To Use Add to any chart. Use the background color to identify if you’re in a mean-revert, breakout, or chop regime. Take only the signals that match the regime: Green = fade extremes, Red = ride breakouts, Gray = wait. Tune settings for your asset and timeframe. All signals are educational—always test before live use! Past performance is not necessarily indicative of future results. Test the indicator on your assets and timeframes. All signals are for educational use only.
Pine Script®指標
由Finntech1提供