مؤشرأبو سليمان🎯 ماذا يفعل المؤشر؟
يقوم بتلوين الشمعة التي تحقق الشروط " سر المهنة " بلون أزرق (أو حسب اختيارك).
يرسم خطين أفقيين على:
أعلى الشمعة (باللون الأخضر)
أدنى الشمعة (باللون الأحمر)
هذه الخطوط تمتد يمينًا حتى يتم اختراقها بإغلاق جسم الشمعة:
الخط الأخضر يتوقف إذا تم اختراقه صعودًا.
الخط الأحمر يتوقف إذا تم كسره هبوطًا.
🔔 التنبيه:
يوفر المؤشر تنبيهًا تلقائيًا عند اختراق الخط الأخضر، وهو بمثابة إشارة دخول محتملة بعد تجاوز مقاومة الكذب السابقة.
🔊 رسالة التنبيه:
تم اختراق الخط الأخضر لشمعة أبو سليمان
⚙️ الإعدادات القابلة للتخصيص:
تفعيل/إلغاء تلوين الشمعة
اختيار لون الشمعة
اختيار لون ونمط الخط العلوي والسفلي
📌 وقف الخسارة (اختياري):
أسفل أدنى الشمعة التي حققت "كذب الصعود".
أو الخط الأحمر السفلي إن كان مرسومًا.
🎯 المستهدف:
يمكن تحديده بنسبة مخاطرة/عائد 1:2
أو بناءً على أقرب مقاومة.
📢 ملاحظة:
هذه الاستراتيجية مبنية على سلوك سعري،
خيار البيع والشراء وشرعية السهم أنت لوحدك المسؤول عنها
صلى الله عليه وسلم
اذكروني بدعوه
اخوكم أبو سليمان
🎯 What Does the Indicator Do?
The indicator highlights the candle that meets the special “Trade Secret” conditions in blue (or your preferred color).
It then draws two horizontal lines:
A green line at the top of the candle
A red line at the bottom of the candle
These lines extend to the right until they are broken by a full-body candle close:
The green line stops if it is broken to the upside
The red line stops if it is broken to the downside
🔔 Alert:
The indicator provides an automatic alert when the green line is broken.
This is considered a potential entry signal after price breaks through the previous "false breakout" resistance.
🔊 Alert message:
“The green line of the Abu Sulaiman candle has been broken.”
⚙️ Customizable Settings:
Enable/disable candle highlighting
Choose highlight color
Choose color and style for the upper and lower lines
📌 Stop Loss (optional):
Just below the low of the candle that triggered the false rally
Or below the red support line if drawn
🎯 Target:
Based on a 1:2 risk/reward ratio
Or based on the nearest resistance level
📢 Note:
This strategy is based on price behavior and market psychology.
You are solely responsible for your buy/sell decisions and verifying the stock's compliance
and validity.
圖表形態
Reaper Wick Sweep (Elias Pattern)This is the pattern that i personally use.
Reaper pattern or Elias"s pattern:-It's a pattern of candlestick in which the candle takes over the whole previous candle & closes below it's wick.This pattern shows the proper domination of buyers or sellers.It has alerts also so, you don't have to stick to your screen for whole time just get in when alert hits you.
MTF Confirmation v2Multi-Timeframe Direction Confirmation Indicator
📊 Overview
This Pine Script indicator provides high-probability buy and sell signals by confirming that both 1-minute and 5-minute timeframes are moving in the same direction. It eliminates false signals by requiring multiple timeframe agreement before generating alerts.
🎯 How It Works
Trend Detection Method:
EMA Analysis: Uses 20-period Exponential Moving Average to determine trend direction
RSI Confirmation: 14-period RSI validates momentum (>50 bullish, <50 bearish)
Price Action: Confirms price is above/below EMA in trend direction
EMA Slope: Ensures EMA is actually rising (bullish) or falling (bearish)
Signal Generation:
BUY Signal: Only when BOTH 1M and 5M timeframes are bullish simultaneously
SELL Signal: Only when BOTH 1M and 5M timeframes are bearish simultaneously
Cooldown System: Prevents signal spam with 5-bar minimum between signals
📈 Visual Elements
Primary Signals:
Green "BUY" Labels: Appear below candles when both timeframes align bullish
Red "SELL" Labels: Appear above candles when both timeframes align bearish
Background Colors:
Light Green: Both timeframes trending up
Light Red: Both timeframes trending down
No Color: Timeframes not aligned or neutral
Trend Indicators:
Blue Dots: Show 1-minute timeframe trend direction
Orange Dots: Show 5-minute timeframe trend direction
Question Marks: Partial alignment (one timeframe trending, preparing for signal)
Status Table (Top Right):
Timeframe Status: Real-time direction of each timeframe
Alignment Status: Shows when timeframes are synchronized
Signal Status: Current signal state and cooldown timers
Cooldown Counters: Bars remaining until next signal available
⚙️ Customizable Settings
Technical Parameters:
EMA Period: Default 20 (trend smoothness)
RSI Period: Default 14 (momentum sensitivity)
Signal Cooldown: Default 5 bars (prevents overtrading)
Filter Options:
Volume Filter: Optional above-average volume requirement
Alerts Toggle: Enable/disable notifications
Table Display: Show/hide status information
🚨 Alert System
Instant Notifications: Alerts fire when both timeframes align
Price Information: Includes current price in alert message
Once Per Bar: Prevents alert spam during volatile periods
Clear Messages: "BUY SIGNAL: 1M and 5M both BULLISH" format
💡 Best Use Cases
Ideal For:
Scalping: Quick entries with multi-timeframe confirmation
Day Trading: Reliable intraday signals
Trend Following: Catching strong directional moves
Risk Management: Avoiding false breakouts
Timeframe Recommendations:
Works on any chart timeframe
Most effective on 1M, 5M, or 15M charts
Provides earlier signals than single-timeframe indicators
⚡ Key Advantages
Reduced False Signals:
Requires agreement between multiple timeframes
Filters out noise and whipsaws
Cooldown prevents overtrading
Clear Decision Making:
Simple buy/sell signals
Visual confirmation through colors and table
No complex interpretation required
Comprehensive Information:
Real-time status of all timeframes
Setup warnings with question marks
Countdown to next available signal
📋 Setup Instructions
Copy the Pine Script code
Open TradingView Pine Editor
Paste code and save
Add to chart
Configure settings to preference
Set up alerts for desired signals
🎪 Expected Performance
Signal Frequency: 3-8 signals per trading day (depending on volatility)
Quality Focus: Fewer but higher-probability setups
Win Rate: Improved due to multi-timeframe confirmation
Suitable for: Both automated and manual trading strategies
MAGGIFX - Timings🧲 Maggifx Sessions Indicator
The Maggifx Indicator is designed for intraday traders seeking precision and visual clarity when navigating the market’s main sessions. Built upon the Market Magnetism Theorem, it automatically highlights key time zones — Asia, London, and New York — to help identify imbalances, manipulations, and high-probability entries.
✅ Key Features:
📦 Custom session boxes for Asia, London, and New York.
🔀 Adjustable time zone setting (default: UTC-3).
🧭 Highlights the Asian range midpoint — essential for forecasting directional shifts.
📈 Auto-extension of Asian highs and lows to assess breakouts or liquidity grabs.
🧊 Strategic micro-blocks (5:30, 7:30, 12:00) to mark potential polarity shifts.
🎯 Visual marker for the daily starting point.
🎨 Fully customizable colors and styles, matching any chart layout.
🎓 Perfect for:
Traders of XAUUSD, NASDAQ, SP500, US30, EURUSD, and GBPUSD.
Strategies based on liquidity, inducements, and reaction to key zones.
Anyone using the Maggifx Methodology or working with Session Timing.
Let me know if you want a shorter, punchier version for Instagram or a tech-spec bullet sheet for advanced users.
Nidnoi 89 TheoryNidnoi Morning Trading style
// This strategy is based on a reversal logic applied to the 8AM candle (Bangkok Time, UTC+7).
// The logic is:
// - If the 8AM candle is bullish (green), it indicates potential exhaustion — enter a SELL at the 9AM open.
// - If the 8AM candle is bearish (red), it suggests a possible bounce — enter a BUY at the 9AM open.
// All trades are closed at the 10AM open, limiting exposure to 1 hour.
//
// This strategy is designed for XAUUSD on a 1-hour chart and aligns with short-term intraday reversal patterns.
// The actual time used in code (UTC+7) is 9PM for the 8AM candle, and 10PM for the exit at 10AM.
//
// Highlights are shown on the 8AM candle for visual confirmation.
// Make sure your chart is set to 1H timeframe and uses XAUUSD.
TTM Squeeze HistogramMacro S&D Suite: Part 4 of 4 — TTM Squeeze Histogram Overview
Introduction to TTM Squeeze Histogram
Credit: The TTM Squeeze concept was developed by John Carter, and our Histogram builds directly on his methodology.
The TTM Squeeze Histogram complements the on‑chart Combo by providing a clear, pane‑based heatmap of market momentum. Building on John Carter's squeeze concept, it visualises momentum strength and weakening through four distinct colours, making it easy to spot shifts before price movements confirm them.
How TTM Squeeze Histogram Works
Histogram Metric: Calculates the rate‑of‑change of the Bollinger Band midline, plotting it as a histogram.
Four‑State Colouring:
Green: Strong upward momentum (rising above zero)
Orange: Weakening upward momentum (falling highs above zero)
Red: Strong downward momentum (falling below zero)
Blue: Weakening downward momentum (rising lows below zero)
Squeeze Markers: Black dots indicate squeeze-on, and grey dots indicate squeeze-off, aligning with the histogram for seamless cross-confirmation.
This pane allows you to watch momentum build and fade, confirming or warning against potential breakouts at your support and resistance (S&D) zones.
Applying TTM Squeeze Histogram
Add the Histogram pane to your chart alongside Alpha, Beta, and the Combo overlay.
Align Signals: Look for colour transitions (orange→green or blue→red) coinciding with Beta or Alpha zone touches.
Confirm Timing: Use the histogram to anticipate momentum surges before price breaks key channels.
Entry & Exit Guidance: Enter when the colour flips to a strong state; consider exits or scaling back when it shifts back toward weaker colours.
Multi-Tool Confluence: Utilise the histogram in conjunction with Combo squeeze-off and S&D zone reactions to achieve the highest-probability setups.
Advantages of TTM Squeeze Histogram
Momentum Clarity: Four-state colours make it obvious when momentum is building or losing momentum.
Early Warning: Identify weakening momentum before a price reversal occurs, allowing you to lock in profits or avoid false breakouts.
Pane‑Based Focus: Keeps price chart uncluttered while providing deep momentum insight.
Synergy with Combo: Pairs perfectly with the Combo overlay for cross‑validation of squeeze events.
Bringing It All Together
By using Macro S&D Alpha, Beta, TTM Squeeze Combo, and Histogram together, you gain a full‑spectrum trading framework:
Alpha for big‑picture pivots (daily/4‑h)
Beta for tactical zone precision (30‑m/5‑m)
Combo for on‑chart volatility‑momentum context
Histogram for focused momentum heatmapping
This four‑tool suite provides a high‑probability setup and helps you manage risk with confidence.
Our Mission
We are committed to building and servicing our trading community with trust and integrity. These indicators are tools—what truly matters is your continuous learning, discipline, and responsible execution. Thank you for joining us on this journey; we look forward to supporting your success across all market conditions.
Disclaimer
Access and use of the Macro S&D Suite and TTM Squeeze tools are provided on an "as‑is" basis. You acknowledge and agree that all trading decisions are solely your responsibility. Past performance does not guarantee future results. No representation is made regarding the accuracy or completeness of the signals, and we disclaim any liability for losses or damages incurred through their use. Always employ appropriate risk management and seek independent advice as needed.
Reversal IndicatorWhat does this indicator do?
This indicator is designed to help traders spot potential reversal points in the market by combining multiple conditions:
✅ Multi-Timeframe RSI – Checks RSI on a lower timeframe (like 5m) to see if the market is oversold or overbought.
✅ Higher Timeframe SMA Filter – Uses a higher timeframe SMA (like 1h) as a trend filter, so signals only trigger in the direction of the bigger trend.
✅ Candle Pattern Confirmation – Looks for bullish or bearish engulfing candles to confirm price exhaustion before signaling a reversal.
When all these conditions align, the indicator plots a triangle under/above the candle to highlight a possible reversal.
Why is this useful?
Many traders struggle with false RSI signals or candle patterns that fail because they don’t respect the larger trend.
This indicator filters out weak setups by requiring alignment between:
A lower timeframe RSI oversold/overbought condition,
A higher timeframe trend filter (SMA),
And a strong candle reversal pattern.
This multi-layer approach helps avoid chasing every RSI dip and focuses only on high-probability reversal zones.
How does it work?
Bullish reversal signal → appears when RSI on the lower TF is oversold, price is still above the higher TF SMA (trend still intact), AND a bullish engulfing candle forms.
Bearish reversal signal → appears when RSI on the lower TF is overbought, price is below the higher TF SMA, AND a bearish engulfing candle forms.
When all conditions match, the indicator plots a triangle under the candle for bullish signals and above the candle for bearish signals.
How to use it?
Choose your timeframes:
A timeframe for trend filtering (e.g. 1h).
A timeframe for RSI (e.g. 4h).
NOTICE: THE RSI TIMEFRAME SHOULD BE GREATER THEN THE TIMEFRAME FOR THE SMA
Otherwise it will not generate that much signals.
Watch for signals ONLY in the direction of the higher trend.
Use the signals as potential reversal points, not as guaranteed entries. Combine with your own confluence.
Optionally set alerts for bullish or bearish reversal conditions so you never miss a setup.
Customization
✅ Choose your RSI length & overbought/oversold levels.
✅ Select which timeframes you want for SMA & RSI.
✅ Toggle the higher TF SMA display on/off.
✅ Adjust signal appearance (triangles).
Important Notes
⚠️ This is not a standalone trading system. It’s a tool to help spot possible reversal areas. Always confirm with price action, support/resistance, or your own strategy
TTM Squeeze ComboMacro S&D Suite: Part 3 of 4 — TTM Squeeze Combo Overview
Introduction to TTM Squeeze Combo
The TTM Squeeze Combo brings volatility and momentum analysis directly onto your price chart. Credit for the original Squeeze concept goes to John Carter, who combined Bollinger Bands and Keltner Channels into a powerful volatility filter. Our implementation overlays squeeze dots, channels, and a semi-transparent momentum histogram, allowing you to see both coiling and breakout conditions in the context of your Alpha and Beta zones.
How the TTM Squeeze Combo Works
Squeeze Detection: When Bollinger Bands (20 SMA ± 2 σ) contract inside Keltner Channels (20 EMA ± 1.5 ATR), the market is in a low‑volatility "squeeze" (plotted as a red dot). Expansion outside signals breakout potential (grey arrow).
Channel Overlay: Bollinger and Keltner boundaries are drawn on the chart, framing price action within volatility bands.
Semi‑Transparent Histogram: Plots the rate‑of‑change of the SMA midline as bars behind the candles, colour-coded by momentum direction (strong up, weak up, strong down, weak down).
This overlay keeps all signals in one view, giving you immediate context when price interacts with supply & demand zones.
Applying TTM Squeeze Combo
Add the Combo to your lower‑timeframe chart (e.g. 15‑ or 5‑minute).
Align squeeze‑on dots with Alpha and Beta zones: look for dots appearing as price enters a zone, indicating a coiled market.
Watch for squeeze‑off arrows at breakout: confirm with the histogram flipping to a strong colour (green for bullish, red for bearish).
Entrances & Exits: Enter on the first candle, breaking the bands in the direction of the histogram confirmation. Use zone boundaries for stops and take‑profits.
Timeframe Consistency: While most effective on shorter timeframes, you can apply the Combo on any timeframe to confirm broader momentum shifts.
Advantages of TTM Squeeze Combo
On‑Chart Clarity: Eliminates pane‑switching by combining volatility dots, channels, and histogram with price.
Momentum Insight: Four‑state colouring alerts you to weakening or strengthening momentum in real time.
Zone Confirmation: Enhances S&D entries by confirming coiled price action and explosive breakouts exactly at your zones.
Flexible Application: Supports both intraday scalping and swing‑trade timing across multiple timeframes.
Disclaimer
Access to and use of the TTM Squeeze Combo, Macro S&D Alpha, and Macro S&D Beta tools are provided on an "as‑is" basis. You acknowledge and agree that all trading decisions are your sole responsibility. Past performance is not indicative of future results, and no guarantee is made regarding profitability or accuracy of signals. You should employ appropriate risk management and seek independent advice as needed. We disclaim any liability for losses or damages incurred through the use of these indicators.
Macro S&D AlphaMacro S&D Suite: Part 1 of 4 — Macro S&D Alpha Overview
Introduction to Macro S&D Alpha
Macro S&D Alpha focuses on identifying high‑timeframe supply and demand pivots based on key historical price swings and market structure. It is not restricted to any time frame but is suitable for weekly, Daily, 4‑hour, and 1‑hour charts. It reveals the broad zones where institutional participants place large orders. These structural levels form the potential backbone for a trading plan, guiding strategic entry and exit points for traders. Trading the financial markets is not a quick‑rich scheme. It requires dedication to learning, disciplined execution of your trading plan, precise entries and exits, and effective risk management. Your mental and physical well‑being also play a crucial role in consistent performance. This system provides tools to guide you, but success depends on your commitment and responsibility.
How Macro S&D Alpha Works
Historical Swing Analysis: Identifies key high/low pivot points over a user-defined look-back period to capture meaningful inflexion levels in market structure.
Volatility & Structure Filters: Integrates momentum and volatility metrics to confirm only the strongest pivot areas, filtering out noise and low‑volume swings.
Zone Construction & Projection: Draws horizontal supply (resistance) and demand (support) zones based on validated pivots, extending them forward to highlight potential reaction areas.
Dynamic Recalculation: Zones automatically update as new pivots form, ensuring the indicator stays aligned with evolving price action and overall trend.
Applying Macro S&D Alpha
Select Daily or 4‑Hour Charts: Add Alpha to visualise the most impactful support and resistance zones.
Observe Price Interactions: Look for clear bounces or rejections at zone boundaries—these are high‑probability areas.
Confirm with Context: Use trend indicators or fundamental insights to ensure alignment with the broader market direction.
Plan Entries & Exits: Enter near the zone edge, place stops just beyond the zone, and set profit targets at subsequent structural pivots.
Advantages of Macro S&D Alpha
Strategic Insight: Highlights the dominant market structure that persists over days and weeks.
Automated Updates: Zones recalculate seamlessly as new pivots form, eliminating the need for manual redrawing.
Clear Risk Parameters: Defined zone bounds enable precise stop-loss placement and reward-to-risk calculation.
Simplified Analysis: One indicator conveys multi‑month structure, ideal for swing and position traders.
3D Surface Modeling [PhenLabs]📊 3D Surface Modeling
Version: PineScript™ v6
📌 Description
The 3D Surface Modeling indicator revolutionizes technical analysis by generating three-dimensional visualizations of multiple technical indicators across various timeframes. This advanced analytical tool processes and renders complex indicator data through a sophisticated matrix-based calculation system, creating an intuitive 3D surface representation of market dynamics.
The indicator employs array-based computations to simultaneously analyze multiple instances of selected technical indicators, mapping their behavior patterns across different temporal dimensions. This unique approach enables traders to identify complex market patterns and relationships that may be invisible in traditional 2D charts.
🚀 Points of Innovation
Matrix-Based Computation Engine: Processes up to 500 concurrent indicator calculations in real-time
Dynamic 3D Rendering System: Creates depth perception through sophisticated line arrays and color gradients
Multi-Indicator Integration: Seamlessly combines VWAP, Hurst, RSI, Stochastic, CCI, MFI, and Fractal Dimension analyses
Adaptive Scaling Algorithm: Automatically adjusts visualization parameters based on indicator type and market conditions
🔧 Core Components
Indicator Processing Module: Handles real-time calculation of multiple technical indicators using array-based mathematics
3D Visualization Engine: Converts indicator data into three-dimensional surfaces using line arrays and color mapping
Dynamic Scaling System: Implements custom normalization algorithms for different indicator types
Color Gradient Generator: Creates depth perception through programmatic color transitions
🔥 Key Features
Multi-Indicator Support: Comprehensive analysis across seven different technical indicators
Customizable Visualization: User-defined color schemes and line width parameters
Real-time Processing: Continuous calculation and rendering of 3D surfaces
Cross-Timeframe Analysis: Simultaneous visualization of indicator behavior across multiple periods
🎨 Visualization
Surface Plot: Three-dimensional representation using up to 500 lines with dynamic color gradients
Depth Indicators: Color intensity variations showing indicator value magnitude
Pattern Recognition: Visual identification of market structures across multiple timeframes
📖 Usage Guidelines
Indicator Selection
Type: VWAP, Hurst, RSI, Stochastic, CCI, MFI, Fractal Dimension
Default: VWAP
Starting Length: Minimum 5 periods
Default: 10
Step Size: Interval between calculations
Range: 1-10
Visualization Parameters
Color Scheme: Green, Red, Blue options
Line Width: 1-5 pixels
Surface Resolution: Up to 500 lines
✅ Best Use Cases
Multi-timeframe market analysis
Pattern recognition across different technical indicators
Trend strength assessment through 3D visualization
Market behavior study across multiple periods
⚠️ Limitations
High computational resource requirements
Maximum 500 line restriction
Requires substantial historical data
Complex visualization learning curve
🔬 How It Works
1. Data Processing:
Calculates selected indicator values across multiple timeframes
Stores results in multi-dimensional arrays
Applies custom scaling algorithms
2. Visualization Generation:
Creates line arrays for 3D surface representation
Applies color gradients based on value magnitude
Renders real-time updates to surface plot
3. Display Integration:
Synchronizes with chart timeframe
Updates surface plot dynamically
Maintains visual consistency across updates
🌟 Credits:
Inspired by LonesomeTheBlue (modified for multiple indicator types with scaling fixes and additional unique mappings)
💡 Note:
Optimal performance requires sufficient computing resources and historical data. Users should start with default settings and gradually adjust parameters based on their analysis requirements and system capabilities.
EMA HMA ATF Trade SignalThis indicator is designed as a discretionary trading tool to highlight high-quality trade setups across 15-minute and similar intraday timeframes. It uses a multi-layered logic framework combining trend, momentum, structure, and timing filters. It is not meant to fire frequently — its strength is in filtering out noise and emphasizing clean, aligned market moves.
A+++ 30min OB + 5min MSS StrategyIdentify OB on 30min
Find last bullish/bearish candle before strong move
Mark the OB zone with proper box (body-to-wick or full candle)
Wait for price to return to this 30min OB
Wait for 5min Market Structure Shift (MSS)
Look for break of structure (BOS) inside 30min OB zone
Bullish: Break of last 5min lower high
Bearish: Break of last 5min higher low
Refine entry at 5min Order Block
After MSS, wait for price to pull back into 5min OB (refined entry)
Enter on rejection candle or confirmation within 5min OB
Risk Management
SL: Below 5min structure low (swing low)
TP: Fixed 1:5 RR or to next liquidity/supply/demand zone
Optional Confluences (Improve Win Rate):
Volume spike during MSS
Killzone timing (London or NY open)
EQH/EQL or liquidity sweep before MSS
Essa - Market Structure & Fibonacci ToolkitOverview
The Essa Market Structure & Fibonacci Toolkit is a comprehensive trading indicator that combines advanced market structure analysis with customizable fibonacci levels and fair value gap detection. It identifies high-probability trading opportunities by detecting confluence zones where multiple technical factors align, providing traders with precise entry and exit points based on institutional trading concepts.
Key Features
📊Market Structure Analysis
Pattern Recognition: Automatically detects Higher Highs (HH), Higher Lows (HL), Lower Highs (LH), Lower Lows (LL)
Change of Character (CHoCH): Identifies trend changes and market structure breaks
Pattern Locking: Fibonacci levels lock to specific swing patterns (LH→LL for bearish, HL→HH for bullish)
Multi-Timeframe Analysis: Analyzes trend strength across multiple timeframes with scoring system
🧮 Custom Fibonacci System
Fully Configurable Levels: Set any percentage (e.g., 25%, 65%, 87.5%) - not limited to traditional levels
Dynamic Labels: Shows your actual percentages, not hardcoded values
Golden Zone Trading: Customizable optimal entry zones between any two fibonacci levels
Auto-Extension: Levels automatically extend as price moves
Distance Tables: Real-time pip distances to nearest fibonacci levels
📈 Fair Value Gap (FVG) Detection
Smart Detection: Identifies bullish and bearish fair value gaps with size filtering
Age Tracking: Shows how long each FVG has been active (bars or time format)
Confluence Highlighting: Enhanced colors when FVGs overlap with fibonacci golden zones
Width Filtering: ATR-based minimum width requirements to filter noise
🎯 Confluence Trading
Multi-Factor Analysis: Combines market structure + fibonacci + FVGs + golden zones
High-Probability Zones: Highlights areas where multiple factors converge
Trend Strength Scoring: 0-100% scoring system based on multiple confluence factors
Smart Alerts: Notifications for high-confluence setups only
⚡ Advanced Features
Trend Analysis Table: Real-time trend bias, strength score, and pattern identification
Adaptive Sensitivity: Automatically adjusts to market volatility using ATR
Professional Alerts: Customizable alerts for structure breaks, golden zone touches, and FVG confluence
Clean Interface: Basic/Advanced settings organization with inline controls
🎨 Visual Excellence
Professional Styling: Clean, institutional-grade visual presentation
Customizable Colors: Full color customization for all elements
Smart Labeling: Context-aware labels that don't overlap
Performance Optimized: Efficient rendering with visual element limits
Perfect for: Swing traders, day traders, and institutional-style traders who want to identify high-probability setups using confluence of market structure, fibonacci levels, and fair value gaps.
Universal Renko Bars by SiddWolfUniversal Renko Bars or UniRenko Bars is an overlay indicator that applies the logic of Renko charting directly onto a standard candlestick chart. It generates a sequence of price-driven bricks, where each new brick is formed only when the price moves a specific amount, regardless of time. This provides a clean, price-action-focused visualization of the market's trend.
WHAT IS UNIVERSAL RENKO BARS?
For years, traders have faced a stark choice: the clean, noise-free world of Renko charts, or the rich, time-based context of Candlesticks. Choosing Renko meant giving up your favorite moving averages, volume profiles, and the fundamental sense of time. Choosing Candlesticks meant enduring the market noise that often clouds true price action.
But what if you didn't have to choose?
Universal Renko Bars is a revolutionary indicator that ends this dilemma. It's not just another charting tool; it's a powerful synthesis that overlays the pure, price-driven logic of Renko bricks directly onto your standard candlestick chart. This hybrid approach gives you the best of both worlds:
❖ The Clarity of Renko: By filtering out the insignificant noise of time, Universal Renko reveals the underlying trend with unparalleled clarity. Up trends are clean successions of green bricks; down trends are clear red bricks. No more guesswork.
❖ The Context of Candlesticks: Because the Renko logic is an overlay, you retain your time axis, your volume data, and full compatibility with every other time-based indicator in your arsenal (RSI, MACD, Moving Averages, etc.).
The true magic, however, lies in its live, Unconfirmed Renko brick. This semi-transparent box is your window into the current bar's real-time struggle. It grows, shrinks, and changes color with every tick, showing you exactly how close the price is to confirming the trend or forcing a reversal. It’s no longer a lagging indicator; it’s a live look at the current battle between buyers and sellers.
Universal Renko Bars unifies these two powerful charting methods, transforming your chart into a more intelligent, noise-free, and predictive analytical canvas.
HOW TO USE
To get the most out of Universal Renko Bars, here are a few tips and a full breakdown of the settings.
Initial Setup for the Best Experience
For the cleanest possible view, it's highly recommended that you hide the body of your standard candlesticks, that shows only the skelton of the candle. This allows the Renko bricks to become the primary focus of your chart.
→ Double click on the candles and uncheck the body checkbox.
Settings Breakdown
The indicator is designed to be powerful yet intuitive. The settings are grouped to make customization easy.
First, What is a "Tick"?
Before we dive in, it's important to understand the concept of a "Tick." In Universal Renko, a Tick is not the same as a market tick. It's a fundamental unit of price movement that you define. For example, if you set the Tick Size to $0.50, then a price move of $1.00 is equal to 2 Ticks. This is the core building block for all Renko bricks. Tick size here is dynamically determined by the settings provided in the indicator.
❖ Calculation Method (The "Tick Size" Engine)
This section determines the monetary value of a single "Tick."
`Calculation Method` : Choose your preferred engine for defining the Tick Size.
`ATR Based` (Default): The Tick Size becomes dynamic, based on market volatility (Average True Range). Bricks will get larger in volatile markets and smaller in quiet ones. Use the `ATR 14 Multiplier` to control the sensitivity.
`Percentage` : The Tick Size is a simple percentage of the current asset price, controlled by the `Percent Size (%)` input.
`Auto` : The "set it and forget it" mode. The script intelligently calculates a Tick Size based on the asset's price. Use the `Auto Sensitivity` slider to make these automatically calculated bricks thicker (value > 1.0) or thinner (value < 1.0).
❖ Parameters (The Core Renko Engine)
This group controls how the bricks are constructed based on the Tick Size.
`Tick Trend` : The number of "Ticks" the price must move in the same direction to print a new continuation brick. A smaller value means bricks form more easily.
`Tick Reversal` : The number of "Ticks" the price must move in the opposite direction to print a new reversal brick. This is typically set higher than `Tick Trend` (e.g., double) to filter out minor pullbacks and market noise.
`Open Offset` : Controls the visual overlap of the bricks. A value of `0` creates gapless bricks that start where the last one ended. A value of `2` (with a `Tick Reversal` of 4) creates the classic 50% overlap look.
❖ Visuals (Controlling What You See)
This is where you tailor the chart to your visual preference.
`Show Confirmed Renko` : Toggles the solid-colored, historical bricks. These are finalized and will never change. They represent the confirmed past trend.
`Show Unconfirmed Renko` : This is the most powerful visual feature. It toggles the live, semi-transparent box that represents the developing brick. It shows you exactly where the price is right now in relation to the levels needed to form the next brick.
`Show Max/Min Levels` : Toggles the horizontal "finish lines" on your chart. The green line is the price target for a bullish brick, and the red line is the target for a bearish brick. These are excellent for spotting breakouts.
`Show Info Label` : Toggles the on-chart label that provides key real-time stats:
🧱 Bricks: The total count of confirmed bricks.
⏳ Live: How many chart bars the current live brick has been forming. These bars forms the Renko bricks that aren't confirmed yet. Live = 0 means the latest renko brick is confirmed.
🌲 Tick Size: The current calculated value of a single Tick.
Hover over the label for a tooltip with live RSI(14), MFI(14), and CCI(20) data for additional confirmation.
TRADING STRATEGIES & IDEAS
Universal Renko Bars isn't just a visual tool; it's a foundation for building robust trading strategies.
Trend Confirmation: The primary use is to instantly identify the trend. A series of green bricks indicates a strong uptrend; a series of red bricks indicates a strong downtrend. Use this to filter out trades that go against the primary momentum.
Reversal Spotting: Pay close attention to the Unconfirmed Brick . When a strong trend is in place and the live brick starts to fight against it—changing color and growing larger—it can be an early warning that a reversal is imminent. Wait for the brick to be confirmed for a higher probability entry.
Breakout Trading: The `Max/Min Levels` are your dynamic breakout zones. A long entry can be considered when the price breaks and closes above the green Max Level, confirming a new bullish brick. A short entry can be taken when price breaks below the red Min Level.
Confluence & Indicator Synergy: This is where Universal Renko truly shines. Overlay a moving average (e.g., 20 EMA). Only take long trades when the green bricks are forming above the EMA. Combine it with RSI or MACD; a bearish reversal brick forming while the RSI shows bearish divergence is a very powerful signal.
A FINAL WORD
Universal Renko Bars was designed to solve a fundamental problem in technical analysis. It brings together the best elements of two powerful methodologies to give you a clearer, more actionable view of the market. By filtering noise while retaining context, it empowers you to make decisions with greater confidence.
Add Universal Renko Bars to your chart today and elevate your analysis. We welcome your feedback and suggestions for future updates!
Follow me to get notified when I publish New Indicator.
~ SiddWolf
KHUSHI VERMA DEHRI ON SONEKhushi Verma Dehri On Sone - ZigZag Buy/Sell with Volume Pressure & Stop Loss
This indicator combines ZigZag-based Buy/Sell signals, dynamic stop-loss levels, and a Volume Pressure histogram to provide a powerful visual trading tool.
🔍 Key Features:
ZigZag Buy/Sell Detection:
Automatically identifies significant highs and lows using ZigZag logic with a user-defined lookback period (depth).
Red "SELL" labels at swing highs
Green "BUY" labels at swing lows
Connected with directional lines for clarity
Stop Loss Visualization:
For each signal, a horizontal dashed stop-loss line is drawn:
For SELL signals: SL = High + %SL
For BUY signals: SL = Low − %SL
Volume Pressure Histogram:
Visualizes the net buying/selling pressure based on candle direction:
Green bars: Positive (buying) pressure
Red bars: Negative (selling) pressure
Blue line: Smoothed pressure using EMA
⚙️ Inputs:
ZigZag Lookback: Number of bars to detect swing highs/lows
Stop Loss (%): Distance from pivot high/low to define SL
Volume Smoothing Length: EMA length for volume pressure
Show Histogram: Toggle for displaying the volume pressure bars
Gold Reversal Sniper + TTM Squeeze FilterA reversal indciator for gold, layered with TTM squeeze to filter out excess signals
OBV Vortex BreakoutThis Indicator Takes bullish Signal from 3 indicators namely: OBV, Vortex & ChopZone. it may generate fake signals so take decision according to your startegy.
AMD [TakingProphets]🧠 What is AMD?
AMD (Accumulation Manipulation Distribution) is a real-time, high-resolution indicator developed for ICT and Smart Money traders who want a clean, accurate visualization of higher timeframe (HTF) candles — right on their current chart — with live price projections for open, high, low, and close levels.
Whether you're aligning with an HTF PD Array, refining entry bias within a lower timeframe, or simply want to know how the session's candle is unfolding, AMD keeps you in sync with institutional price behavior without flipping timeframes.
✨ Key Features
🔍 Live HTF Candle Overlay
Visualize a complete HTF candle — its body, upper/lower wick, and directional bias — rendered directly on your LTF chart. This gives you an instant view of market sentiment and institutional intent at a glance.
📏 HTF Price Projections
Plot the current session’s:
Open – where price began this HTF candle
High/Low – price extremes (optional toggle)
Close – where we are currently closing in relation to the body
Each level is drawn with customizable color, style, and labels — giving you a true dynamic support/resistance model based on real-time HTF structure.
🧰 Full Customization
Tailor everything:
Candle width, transparency, border, and wick color
Projection line styles, thickness, and labels
Label positioning and time format (12h/24h)
The result is a clean, professional overlay you can easily adjust to fit your visual workflow.
🕒 Time Labeling
Know exactly when your HTF candle began. Use the optional time label feature with smart formatting (supports both 12h and 24h formats) to mark session starts or anticipate closures.
🎯 Why AMD Matters for ICT Traders
In ICT methodology, aligning your lower timeframe entries with HTF context is critical. AMD empowers you to:
Use the current open and close positioning to determine if the candle is expanding in your favor
Watch how price reacts to HTF highs and lows in real time — especially during killzones or after liquidity raids
With HTF candles projected over LTF charts, you no longer need to switch views or guess context — everything is displayed for you live and clean.
⚙️ Best Uses and Recommendations
Use AMD with the ICT Killzones + Macros indicator to monitor HTF reaction during session openings
Pair with HTF Order Blocks or HTF POI to track how price respects institutional zones
Combine with the ICT Liquidity Levels tool to monitor if HTF candles are forming around liquidity pools
🚀 Who is AMD for?
✅ Scalpers looking to anchor LTF trades off HTF sentiment
✅ Intraday traders syncing 5m/15m entries with 1H/4H ranges
✅ Swing traders wanting a clean weekly/daily overview without flipping charts
✅ Educators or analysts needing clean, labeled visuals for sessions or streams
📌 Summary
AMD is a must-have for any smart money trader serious about contextual precision. It’s not just a candle visualizer — it’s a real-time HTF alignment tool built to help you trade with the institutions, not against them.
CRT [TakingProphets]CRT (Candle Range Theory) is a high-level, real-time indicator built for ICT/SMC traders who want to visualize higher timeframe (HTF) candles, identify Candle Range Transitions, and uncover Smart Money Divergence (SMT)—without switching timeframes.
Designed to give traders a bird’s-eye view of institutional price action, CRT offers clear visuals for HTF Open-High-Low-Close projections, bullish/bearish CRT formations, and correlated divergence setups, all layered seamlessly over your lower timeframe chart.
🧠 Core Features Explained
✅ HTF Candle Visualization
Overlay candles from any timeframe (1min to Monthly) directly on your active chart. Perfect for traders using HTF context in their LTF setups (e.g., the Flow State Model). The 3 most recent HTF candles are dynamically displayed with full body/wick precision.
✅ Candle Range Transition (CRT) Detection
Identify institutional footprints. CRT detects high-probability Bearish and Bullish CRTs:
Bearish CRT: A failed continuation to the upside (lower close, higher high).
Bullish CRT: A failed breakdown (higher close, lower low).
These formations act as traps or turning points that often signal smart money rejections.
✅ SMT Divergence Integration
Compare price behavior between correlated assets (e.g., ES vs NQ, or EURUSD vs GBPUSD) to detect divergences in CRT behavior. Confirm traps, anticipate reversals, or avoid false breakouts.
✅ Current Candle Projections
Project the real-time HTF candle’s Open, High, Low, and Close levels across the current session. Use these levels as evolving support/resistance, bias filters, or take-profit zones. All levels are fully customizable by color, label, and visibility.
✅ Custom Display Engine
Modify candle body width, label size, wick color, and transparency to tailor the view to your style. Use the Info Box to display the instrument, HTF timeframe, and date stamp clearly at a glance.
✅ SMT Divergence Lines & Alerts
Draws real-time lines connecting CRT divergences across correlated assets, with bold labels like “BULLISH SMT” or “BEARISH SMT”. Paired with alert conditions to never miss critical confirmation or a potential trap.
✅ Alert System Built for Speed
Four alert types included:
Bullish CRT
Bearish CRT
Bullish SMT Divergence
Bearish SMT Divergence
Set them up once and receive real-time push notifications when smart money shows its hand.
⚙️ Why CRT Matters for ICT/SMC Traders
In ICT, understanding where Smart Money shifts delivery or fails to continue a move is critical. CRT captures these moments by analyzing how the middle candle of a three-candle sequence behaves relative to the prior one. If that middle candle fails to expand the range effectively—or diverges from a correlated pair—it often signals an impending shift.
CRT helps you:
Visualize HTF bias and reaction zones without flipping charts
Detect liquidity traps and engineered false moves
Confirm flow state entries or HTF POI rejections
Enhance SMT logic with actionable real-time divergence overlays
🧭 Who Should Use CRT?
Whether you’re a:
Flow State trader identifying PD Arrays and CISD entries
Intraday sniper waiting for killzone shifts and liquidity grabs
Swing trader using weekly HTF rejection models
