立即開始

移動平均線

Fractal Market Geometry [JOAT] Fractal Market Geometry Overview Fractal Market Geometry is an open-source overlay indicator that combines fractal analysis with harmonic pattern detection, Fibonacci retracements and extensions, Elliott Wave concepts, and Wyckoff phase identification. It provides traders with a geometric framework for understanding market structure and identifying potential reversal patterns with multi-factor signal confirmation. What This Indicator Does The indicator calculates and displays: Fractal Detection - Identifies fractal highs and lows using Williams-style pivot analysis with configurable period Fractal Dimension - Calculates market complexity using range-based dimension estimation Harmonic Patterns - Detects Gartley, Butterfly, Bat, Crab, Shark, Cypher, and ABCD patterns using Fibonacci ratios Fibonacci Retracements - Key levels at 38.2%, 50%, and 61.8% Fibonacci Extensions - Projection level at 161.8% Elliott Wave Count - Simplified wave counting based on pivot detection (1-5) Wyckoff Phase - Volume-based phase identification (Accumulation, Markup, Distribution, Neutral) Golden Spiral Levels - ATR-based support and resistance levels using phi (1.618) ratio Trend Detection - EMA crossover trend identification (20/50 EMA) How It Works Fractal detection uses a configurable period to identify swing points: detectFractalHigh(simple int period) => bool result = true float centerVal = high for i = 0 to period - 1 if high >= centerVal or high >= centerVal result := false break Harmonic pattern detection uses Fibonacci ratio analysis between swing points. Each pattern has specific ratio requirements: Gartley: AB 0.382-0.618, BC 0.382-0.886, CD 1.27-1.618 Butterfly: AB 0.382-0.5, BC 0.382-0.886, CD 1.618-2.24 Bat: AB 0.5-0.618, BC 1.13-1.618, CD 1.618-2.24 Crab: AB 0.382-0.618, BC 0.382-0.886, CD 2.24-3.618 Shark: AB 0.382-0.618, BC 1.13-1.618, CD 1.618-2.24 Cypher: AB 0.382-0.618, BC 1.13-1.414, CD 0.786-0.886 Wyckoff phase detection analyzes volume relative to price movement: wyckoffPhase(simple int period) => float avgVol = ta.sma(volume, period) float priceChg = ta.change(close, period) string phase = "NEUTRAL" if volume > avgVol * 1.5 and math.abs(priceChg) < close * 0.02 phase := "ACCUMULATION" else if volume > avgVol * 1.5 and math.abs(priceChg) > close * 0.05 phase := "MARKUP" else if volume < avgVol * 0.7 phase := "DISTRIBUTION" phase Signal Generation Signals use multi-factor confirmation for accuracy: BUY Signal: Fractal low + Uptrend (EMA20 > EMA50) + RSI 30-55 + Bullish candle + Volume confirmation SELL Signal: Fractal high + Downtrend (EMA20 < EMA50) + RSI 45-70 + Bearish candle + Volume confirmation Pattern Detection: Label appears when harmonic pattern completes at current bar Dashboard Panel (Top-Right) Dimension - Fractal dimension value (market complexity measure) Last High - Most recent fractal high price Last Low - Most recent fractal low price Pattern - Current harmonic pattern name or NONE Elliott Wave - Current wave count (Wave 1-5) or OFF Wyckoff - Current market phase or OFF Trend - BULLISH, BEARISH, or NEUTRAL based on EMA crossover Signal - BUY, SELL, or WAIT status Visual Elements Fractal Markers - Small triangles at fractal highs (down arrow) and lows (up arrow) Geometry Lines - Dashed lines connecting the most recent fractal high and low Fibonacci Levels - Clean horizontal lines at 38.2%, 50%, and 61.8% retracement levels Fibonacci Extension - Horizontal line at 161.8% extension level Golden Spiral Levels - Support and resistance lines based on ATR x 1.618 3D Fractal Field - Optional depth layers around swing levels (OFF by default) Harmonic Pattern Markers - Small diamond shapes when Crab, Shark, or Cypher patterns detected Pattern Labels - Text label showing pattern name when detected Signal Labels - BUY/SELL labels on confirmed multi-factor signals Input Parameters Fractal Period (default: 5) - Bars on each side for fractal detection Geometry Depth (default: 3) - Complexity of geometric calculations Pattern Sensitivity (default: 0.8) - Tolerance for pattern ratio matching Show Fibonacci Levels (default: true) - Display retracement levels Show Fibonacci Extensions (default: true) - Display extension level Elliott Wave Detection (default: true) - Enable wave counting Wyckoff Analysis (default: true) - Enable phase detection Golden Spiral Levels (default: true) - Display spiral support/resistance Show Fractal Points (default: true) - Display fractal markers Show Geometry Lines (default: true) - Display connecting lines Show Pattern Labels (default: true) - Display pattern name labels Show 3D Fractal Field (default: false) - Display depth layers Show Harmonic Patterns (default: true) - Display pattern markers Show Buy/Sell Signals (default: true) - Display signal labels Suggested Use Cases Identify potential reversal zones using harmonic pattern completion Use Fibonacci levels for entry, stop-loss, and target planning Monitor Wyckoff phases for accumulation/distribution awareness Track Elliott Wave counts for trend structure analysis Use fractal dimension to gauge market complexity Wait for multi-factor signal confirmation before entering trades Timeframe Recommendations Best on 1H to Daily charts. Lower timeframes produce more fractals but with less significance. Higher timeframes provide stronger levels and more reliable signals. Limitations Harmonic pattern detection uses simplified ratio ranges and may not match all textbook definitions Elliott Wave counting is basic and does not include all wave rules Wyckoff phase detection is volume-based approximation Fractal dimension calculation is simplified Signals require fractal confirmation which has inherent lag equal to the fractal period Open-Source and Disclaimer This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management. - Made with passion by officialjackofalltrades
Pine Script®指標
由officialjackofalltrades提供
Golden Vector Trend Orchestrator (GVTO)Golden Vector Trend Orchestrator (GVTO) is a composite trend-following strategy specifically engineered for XAUUSD (Gold) and volatile assets on H4 (4-Hour) and Daily timeframes. This script aims to solve a common problem in trend trading: "Whipsaws in Sideways Markets." Instead of relying on a single indicator, GVTO employs a Multi-Factor Confluence System that filters out low-probability trades by requiring alignment across Trend Structure, Momentum, and Volatility. 🛠 Methodology & Logic The strategy executes trades only when four distinct technical conditions overlap (Confluence). If any single condition is not met, the trade is filtered out to preserve capital. 1. Market Structure Filter (200 EMA) Indicator: Exponential Moving Average (Length 200). Logic: The 200 EMA acts as the baseline for the long-term trend regime. Bullish Regime: Price must close above the 200 EMA. Bearish Regime: Price must close below the 200 EMA. Purpose: Prevents counter-trend trading against the macro direction. 2. Signal Trigger & Trailing Stop (Supertrend) Indicator: Supertrend (ATR Length 14, Factor 3.5). Logic: Uses Average True Range (ATR) to detect trend reversals while accounting for volatility. Purpose: Provides the specific entry signal and acts as a dynamic trailing stop-loss to let profits run while cutting losses when the trend invalidates. 3. Volatility Gatekeeper (ADX Filter) Indicator: Average Directional Index (Length 14). Threshold: > 25. Logic: A high ADX value indicates a strong trend presence, regardless of direction. Purpose: This is the most critical filter. It prevents the strategy from entering trades during "choppy" or ranging markets (consolidation zones) where trend-following systems typically fail. 4. Momentum Confirmation (DMI) Indicator: Directional Movement Index (DI+ and DI-). Logic: Checks if the buying pressure (DI+) is physically stronger than selling pressure (DI-), or vice versa. Purpose: Ensures that the price movement is backed by genuine momentum, not just a momentary price spike. 📋 How to Use This Strategy 🟢 LONG (BUY) Setup A Buy signal is generated only when ALL of the following occur simultaneously: Price Action: Price closes ABOVE the 200 EMA (Orange Line). Trigger: Supertrend flips to GREEN (Bullish). Strength: ADX is greater than 25 (Strong Trend). Momentum: DI+ (Plus Directional Indicator) is greater than DI- (Minus). 🔴 SHORT (SELL) Setup A Sell signal is generated only when ALL of the following occur simultaneously: Price Action: Price closes BELOW the 200 EMA (Orange Line). Trigger: Supertrend flips to RED (Bearish). Strength: ADX is greater than 25 (Strong Trend). Momentum: DI- (Minus Directional Indicator) is greater than DI+ (Plus). 🛡 Exit Strategy Stop Loss / Take Profit: The strategy utilizes the Supertrend Line as a dynamic Trailing Stop. Exit Long: When Supertrend turns Red. Exit Short: When Supertrend turns Green. Note: Traders can also use the real-time P/L Dashboard included in the script to manually secure profits based on their personal Risk:Reward ratio. 📊 Included Features Real-Time P/L Dashboard: A table in the top-right corner displays the current trend status, ADX strength, and the Unrealized Profit/Loss % of the current active position. Smart Labeling: Buy/Sell labels are coded to appear only on the initial entry trigger. They do not repaint and do not spam the chart if the trend continues (no pyramiding visualization). Visual Aids: Background color changes (Green/Red) to visually represent the active trend based on the Supertrend status. ⚠️ Risk Warning & Best Practices Asset Class: Optimized for XAUUSD (Gold) due to its high volatility nature. It also works well on Crypto (BTC, ETH) and Major Forex Pairs. Timeframe: Highly recommended for H4 (4 Hours) or D1 (Daily). Using this on lower timeframes (M5, M15) may result in false signals due to market noise. News Events: Automated strategies cannot predict economic news (CPI, NFP). Exercise caution or pause trading during high-impact economic releases.
Pine Script®策略
由Gustav_Rex提供
Advanced algo [For Indian market]🙏 Gratitude to the TradingView Community Before anything else, I would like to sincerely thank the TradingView community. I have learned immensely from the shared ideas, scripts, and discussions here over time. This indicator is my small way of giving back to the community that has helped me grow as a trader and developer. 📌 Indicator Overview Advanced Algo is a non-repainting, rule-based trading indicator designed primarily for Indian indices and stocks, while remaining equally effective on other liquid instruments. The script focuses on clean trend identification, disciplined entries, and well-defined risk management, making it suitable for intraday as well as positional analysis depending on the timeframe used. ✅ Key Highlights 100% Non-Repainting Logic All signals are generated only after bar confirmation using a delay mechanism, ensuring reliability and backtesting accuracy. Clear BUY / SELL Signals Signals are plotted only on trend reversals, avoiding noise and repeated entries. Automatic TP & SL Levels Entry, Take-Profit, and Stop-Loss levels are calculated at the time of trade entry and remain fixed throughout the trade. Intrabar TP / SL Detection Profit targets and stop-losses are detected as soon as price touches them, providing realistic trade behavior. Visual Risk-Reward Zones Entry, TP, and SL lines with color-filled zones make trade structure easy to read at a glance. Built-in Statistics Table Displays Buy TP, Sell TP, Buy SL, and Sell SL counts for quick performance tracking. ⚙️ Logic (Brief & High-Level) A smoothed range-based trend filter is used to identify directional bias. Consecutive directional strength confirms trend continuation. BUY or SELL signals are generated only when the trend state flips, reducing false signals. A delay offset is applied to ensure non-repainting behavior. Once a trade is triggered: Entry is fixed TP and SL are calculated using user-defined percentages No new trade is allowed until the current trade exits or reverses 🟢 BUY / 🔴 SELL Logic (Brief) BUY Signal Triggered when price confirms a bullish trend shift after a bearish phase. SELL Signal Triggered when price confirms a bearish trend shift after a bullish phase. Only one trade is active at a time to maintain clarity and discipline. 🎯 Take-Profit & 🛑 Stop-Loss TP & SL are percentage-based and configurable via inputs. Levels are calculated at entry and do not trail or repaint. TP and SL exits are marked clearly on the chart with labels. Trades are force-reset before allowing a new entry. 🔔 Alerts Included Built-in alerts are available for: Long Entry Short Entry Long Exit (TP / SL) Short Exit (TP / SL) These alerts can be easily connected to automation or webhook-based execution systems. ⚠️ Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Trading in stocks, indices, and derivatives involves risk, and past performance does not guarantee future results. Always: Use proper risk management Confirm signals with additional analysis Test thoroughly before using in live markets The author is not responsible for any financial losses incurred while using this script. ⭐ If you find this indicator useful, your feedback and support are always appreciated. Happy trading and all the best!
Pine Script®指標
由sanjaybiligiri提供
EMA and Dow Theory Strategies V2 DOGE Current Optimum Value 📘 Overview These are the current optimal values for DOGE. They are intended for use on the 2‑hour timeframe. This script requires complex configuration, but there is an optimal set of values somewhere. Here, I’m sharing the settings that I personally use at the moment. Turning Take Profit off can lead to higher profits, but it also increases risks such as a lower win rate. With Take Profit on, you can adjust the settings by increasing the values. I have been trading using Dow Theory for many years. Trading with Dow Theory and EMA has been my main strategy. Although it has been profitable, I have long struggled with its low win rate. The issue lies in the immaturity of the exit strategy, and I’m currently experimenting to see if I can solve that. In V2, I added three take‑profit lines, securing 30% of the profit at each level to ensure a minimum level of gain. Additionally, when the trend weakens, half of the position is closed. In all scenarios, the remaining position is held until the trend reverses. The system provides precise entries, adaptive exits, and highly visual guidance that helps traders understand trend structure at a glance. 🧠 Key Features 🔹 1. Dual‑EMA Trend Logic (Symbol + External Index) Both the chart symbol and an external index (OTHERS.D) are evaluated using fast/slow EMAs to determine correlation‑based trend bias. 🔹 2. Dow Theory Swing Detection (Real‑time) The script identifies swing highs/lows and updates trend direction when price breaks them. This creates a structural trend model that reacts faster than EMAs alone. 🔹 3. Gradient Trend Zones (Visual Trend Strength) When trend is up or down, the area between price and the latest swing level is filled with a multi‑step gradient. This makes trend strength and distance-to-structure visually intuitive. 🔹 4. Higher‑Timeframe Swing Trend (htfTrend) Swing highs/lows from a higher timeframe (e.g., 4H) are plotted to show macro structure. Used only for visual context, not for filtering entries. 🔹 5. RSI‑Based Entry Protection RSI prevents entries during extreme overbought/oversold conditions. 🔹 6. Dynamic Exit System Includes: Custom stop‑loss (%) Partial take‑profit (TP1/TP2/TP3) Automatic scale‑out when trend color weakens “Color‑change lockout” to prevent immediate re‑entry Real‑time PnL tracking and labels 🔹 7. Alerts for All Key Events Entry, stop‑loss, partial exits, and trend‑change exits all generate structured JSON alerts. 🔹 8. Visual PnL Labels & Equity Tracking PnL for the latest trade is displayed directly on the chart, including scale‑out adjustments. ⚙️ Input Parameters Parameter Description Fast EMA / Slow EMA EMAs used for symbol trend detection Index Fast / Slow EMA EMAs applied to external index StopLoss (%) Custom stop‑loss threshold Scale‑Out % Portion to exit when trend color weakens RSI Period / Levels Overbought/oversold filters Swing Detection Length Bars used to detect swing highs/lows Stats Display Position of statistics table 🧭 About htfTrend (Higher Timeframe Trend) The higher‑timeframe swing trend is displayed visually but not used for entry logic. Why? Strict HTF filtering reduces trade frequency and often removes profitable setups. By keeping it visual‑only, traders retain flexibility while still benefiting from macro structure awareness. Use it as a contextual guide, not a constraint. 📘 概要 DOGEの現在の最適値です。 2時間足での使用を想定しています。 このスクリプトは複雑な設定が必要ですが、どこかに最適値が存在します。 今回は現在私が個人的に使っている設定値の公開です。 Take ProfitをOFFにするとさらなる利益が望めますが、勝率が下がるなどのリスクが上がります。 ONにした状態で数値を上げることによって調整することが可能です。 私はダウ理論を使ったトレードを長年続けてきました。 ダウ理論とEMAを使ったトレードが私の主力です。 しかし利益は出るものの、長年その勝率の低さに悩んでいました。 問題は出口戦略が未熟なためで、現在はそれらの解決ができないかと試行錯誤を続けています。 V2では3本の利益確定ラインを引き、それぞれ30%ずつ利益を確定し、最低限の利益がでるようにしました。 それ以外にはトレンドが弱まったタイミングで半分の利益確定をし、どのパターンでも残ったポジションはトレンド転換まで持ち続けます。 🧠 主な機能 🔹 1. 銘柄＋外部インデックスの EMA クロス判定 対象銘柄と OTHERS.D の EMA を比較し、相関を考慮したトレンド方向を判定します。 🔹 2. ダウ理論に基づくスイング高値・安値の自動検出 スイング更新によりトレンド方向を切り替える、構造ベースのトレンド判定を採用。 🔹 3. グラデーション背景によるトレンド強度の可視化 スイングラインから現在価格までを段階的に塗り分け、 「どれだけトレンドが伸びているか」を直感的に把握できます。 🔹 4. 上位足スイングトレンド（htfTrend）の表示 4H などの上位足でのスイング高値・安値を表示し、 大局的なトレンド構造を視覚的に把握できます（ロジックには未使用）。 🔹 5. RSI による過熱・売られすぎフィルター 極端な RSI 状態でのエントリーを防止。 🔹 6. 動的イグジットシステム カスタム損切り（％） TP1/TP2/TP3 の段階的利確 トレンド色の弱まりによる自動スケールアウト 色変化後の再エントリー制限（waitForColorChange） リアルタイム PnL の追跡とラベル表示 🔹 7. アラート完備（JSON 形式） エントリー、損切り、部分利確、トレンド反転などすべてに対応。 🔹 8. 損益ラベル・統計表示 直近トレードの損益をチャート上に表示し、視覚的に把握できます。 ⚙️ 設定項目 設定項目名 説明 Fast / Slow EMA 銘柄の EMA 設定 Index Fast / Slow EMA 外部インデックスの EMA 設定 損切り（％） カスタム損切りライン 部分利確割合 トレンド弱化時のスケールアウト割合 RSI 期間・水準 過熱/売られすぎフィルター スイング検出期間 スイング高値・安値の検出に使用 統計表示位置 テーブルの表示位置 🧭 上位足トレンド（htfTrend）について 上位足スイングの更新に基づくトレンド判定を表示しますが、 エントリー条件には使用していません。 理由： 上位足を厳密にロジックへ組み込むと、トレード機会が大幅に減るためです。 本ストラテジーでは、 「大局の把握は視覚で、エントリーは柔軟に」 という設計思想を採用しています。 → 裁量で利確判断や逆張り回避に活用できます。
Pine Script®策略
由mm_mitsuya提供
2
Ultimate Lines Statistical Backtest @MaxMaseratiUltimate lines (MAs/MACD/VWAP,DWA etc..) Statistical Backtest This is a comprehensive statistical backtesting tool that allows traders to objectively measure the performance of 27+ different trading lines across multiple timeframes and sessions. Instead of guessing which moving averages, VWAPs, or volume levels actually work for your trading style, this indicator provides hard data showing exactly how price behaves around each line at specific times of day. The indicator solves a critical problem: most lines create whipsaws in choppy markets, but knowing which lines have the highest continuation rates vs reversal rates at specific session times helps you avoid false signals and focus on setups with proven statistical edges. 🎯 LINES YOU CAN TEST MMM Core Lines: Mid MA: Trend velocity tracker using simple moving average MMPD Line: Premium/Discount change-of-direction indicator Fair Value Golden Ratio: 0.618 equilibrium level between premium and discount zones Volume-Based Lines: VWAP Daily/Weekly: Volume-weighted average price (daily and weekly sessions) Volume POC Multi-TF: Multi-timeframe Point of Control (highest volume price level) Volume POC Weekly: Weekly momentum pivot based on volume distribution Range Midpoints: Range Midpoint 50: 50-period high/low midpoint Range Midpoint 14 TF1/TF2: Configurable timeframe range midpoints with smoothing options Moving Averages (10 MA Types): MACD Fast (12) / Signal (26): Standard MACD moving averages Fast MA 20 / Mid MA 50 / Slow MA 200: Classic trend-following averages Available MA Types: SMA, EMA, WMA, HMA, DEMA, TEMA, LSMA, KAMA, ALMA, VWMA Volatility Indicators: MVM Upper/Lower Bands: Momentum-based volatility bands with adaptive option HVC Bullish/Bearish: High Volume Candle support/resistance levels Ultimate Suite Advanced Lines: DWAP (Delta Weighted Average Price): Directional volume-weighted price with upper/lower bands HVN (High Volume Node): High-frequency trading node detection Hybrid Line: Volume-weighted momentum composite Trend Filter: Two-pole smoothing filter for trend clarity STL Lines: iBuSTL / iBeSTL: Internal Bullish/Bearish Structural Trend Liquidity levels ⚙️ HOW TO TEST Select Lines: Check the boxes for lines you want to analyze (Mid MA, VWAP Daily, Volume POC, etc.) Choose Times: Enable tracking for specific session times (default: 8:30 AM, 9:30 AM, 10:00 AM, Daily Close - EST) Set Lookback: Choose how many days of historical data to analyze (default: 60 days) Enable Pattern Analysis: Turn on "Enable Pattern Analysis" in settings Wait for Data: The indicator needs 20 bars after each signal time to complete analysis Review Statistics: Check the statistics table for detailed breakdowns 📈 STATISTICS EXPLAINED For Each Tracked Time, You'll See: 🟢 Above Selected Lines (X samples): Continued↑: Price stayed above the lines = bullish continuation Reversed↓: Price broke below the lines = reversal/rejection →Kept Going↓: After reversing down, price continued lower (bars 11-20) →Stalled: After reversing down, price came back up (consolidation) Neutral: Price didn't make a clear move either way 🔴 Below Selected Lines (X samples): Continued↓: Price stayed below the lines = bearish continuation Reversed↑: Price broke above the lines = reversal/support bounce →Kept Going↑: After reversing up, price continued higher (bars 11-20) →Stalled: After reversing up, price came back down (consolidation) Neutral: No clear directional move ⭐ Star Ratings: Show which outcome happens most frequently (best probability) 🔬 HYBRID DETECTION SYSTEM (ADVANCED) When enabled, the indicator uses a multi-signal composite scoring system that goes beyond simple percentage movements: Signal A - % Movement Direction (40% weight): Measures the strength and direction of price movement. Strong directional moves (>0.8%) score higher, while opposite-direction moves score negatively. Signal B - Inside Candles (30% weight): Detects true consolidation by counting how many candles close within a defined range. High inside-candle counts indicate choppy, stalled price action rather than clean continuation. Signal C - Successive Closes (30% weight): Tracks momentum persistence by counting consecutive closes in the expected direction. Long streaks (6+ bars) indicate strong follow-through, while breaks in the sequence suggest weakness. Composite Score Classification: ⭐⭐⭐ Strong (75-100 points): All three signals align - high-confidence pattern ⭐⭐ Moderate (50-75 points): Two signals agree - reliable pattern ⭐ Weak (25-50 points): Mixed signals - lower confidence ⚠️ Strong Stalled (0-25 points): Signals show consolidation/reversal This provides nuanced pattern detection that identifies not just IF a pattern succeeded, but HOW STRONGLY it performed. 💡 INTERPRETING RESULTS Good Lines Show: High continuation % when price is above/below (>60% is strong) Clean "Kept Going" patterns after reversals (>50% indicates reliable rejection) Low stalled % (less whipsaw/consolidation) Consistent patterns across multiple times (validates the line's reliability) Poor Lines Show: 50/50 continuation vs reversal (coin flip = no edge) High stalled % (lots of whipsaw/false signals) Inconsistent patterns across different times (unreliable) Example Interpretation: 9:30 AM - VWAP Daily (120 samples) 🟢 Above: Continued↑ 75 (62.5%) ⭐ BEST Reversed↓ 30 (25.0%) Meaning: When price is above VWAP Daily at 9:30 AM, it continues higher 62.5% of the time - this is a statistically strong bullish signal for that session time. 🎯 PRACTICAL VALUE Solves the Whipsaw Problem: Most moving averages and lines work beautifully in trending markets but create endless false signals in choppy, range-bound conditions. By analyzing specific session times and continuation vs reversal patterns, you can: Identify high-probability setups: Focus on lines that show >60% continuation at your preferred trading times Avoid weak signals: Skip lines with high stall rates or 50/50 outcomes Time your entries better: Know which session times produce the cleanest patterns Combine complementary lines: Stack multiple high-scoring lines for confluence Adapt to market conditions: Switch to different lines when market structure changes Real-World Application: Instead of blindly trading VWAP crosses or MA bounces, you'll have objective data showing: "At 9:30 AM on ES, when price is above Mid MA + VWAP Daily + Volume POC, it continues higher 68% of the time with strong momentum (⭐⭐⭐)." This transforms discretionary guesswork into data-driven decision making. ⚙️ LINE DEFINITIONS Moving Averages: Smooth price data over X periods to identify trend direction and dynamic support/resistance. VWAP: Anchored average price weighted by volume - institutional traders' benchmark for "fair value." Volume POC (Point of Control): Price level with the most traded volume - represents maximum market acceptance. Fair Value Golden Ratio: Fibonacci 0.618 level between recent premium (high) and discount (low) - equilibrium zone. DWAP (Delta Weighted): Price average weighted by buying vs selling volume delta - shows directional money flow. Range Midpoints: Geometric center of recent high/low range - mean reversion pivot. Volatility Bands: Envelope around momentum lines showing normal price deviation ranges. HVN (High Volume Node): Automated detection of high-volume price clusters - institutional accumulation/distribution zones. Note: This indicator is purely for statistical analysis and backtesting. It does not generate trade signals or provide entry/exit recommendations. Use the statistics to inform your own trading decisions and strategy development.
Pine Script®指標
由MaxMaserati提供
Zero Lag/Exponential MA Cloud (EMA or ZLEMA+Kalman) w/Buy/SellZero Lag/Exponential MA Cloud (EMA or ZLEMA+Kalman) is a three–moving average trend and structure tool that combines a dual-layer cloud with optional Buy/Sell tags. It plots a Fast, Medium, and Long moving average and shades the space between them to make trend direction and momentum easy to read at a glance. The default source is OHLC4 (the average of open, high, low, and close), which often produces smoother, more stable signals than using close alone. Each moving average can be calculated two different ways: standard EMA or a “ZLEMA + Kalman” mode. EMA is the classic exponential moving average. ZLEMA (Zero-Lag EMA) is a real technique designed to reduce lag by de-lagging the input before running the EMA, using the form EMA(2×src − src , length) where lag is approximately (length−1)/2. In this script, the ZLEMA input is first passed through an adaptive Kalman-style filter (based on Ehlers optimal tracking filter concepts). That filter adjusts its smoothing in real time using a ratio of “signal” (smoothed price change) to “noise” (true range), producing an adaptive alpha: it reacts faster in cleaner trends and smooths more in choppy conditions. The result is a fast-moving average that stays readable instead of becoming jagged. The cloud is split into two zones: one between the Fast and Medium MAs, and another between the Medium and Long MAs. Cloud color is driven by the overall regime defined by Fast vs Long. When Fast is above Long, the Fast→Medium zone is lime and the Medium→Long zone is green. When Fast is below Long, the Fast→Medium zone is red and the Medium→Long zone is maroon. Cloud transparency is adjustable, and the MA lines can be shown or hidden (Fast line is lime, Medium is orange, Long is blue). Signals are optional and configurable. You can choose where Buy tags appear and where Sell tags appear independently using two dropdowns: Buy appears on and Sell appears on . A tag prints only when the candle close flips sides relative to the selected MA (below→above prints Buy, above→below prints Sell), which prevents repeated labels from printing on every bar. “Confirm Bars” keeps the same behavior you’re used to: set it to 1 for immediate printing on the flip candle, or set it to 2+ to require N consecutive closes on the new side before a tag prints, reducing whipsaw at the cost of later signals. Key settings (minimal): * MA Type per line: EMA or ZLEMA + Kalman * Cloud Transparency (0–100) and Show/Hide lines * Buy appears on / Sell appears on (Fast/Med/Long/None) * Confirm Bars (1 = immediate, 2+ = filtered) This indicator is best used as a visual trend framework (cloud regime + structure) with signals acting as optional “side flip” alerts on whichever MA level you consider your trigger line (fast for responsiveness, medium for balance, long for confirmation).
Pine Script®指標
由evaiinvesting提供
Opening Path Selector (EMA200 Context Tool)📝 Description Opening Path Selector is a context-based indicator designed to help traders quickly identify which asset may offer the cleanest directional path at the market open. This tool does not generate entry or exit signals. Its purpose is to reduce decision fatigue during the first minutes of the session by ranking a small set of high-liquidity assets based on higher-timeframe EMA200 structure. 🔍 What this indicator evaluates The dashboard compares a predefined group of major symbols and ranks them according to: • Proximity to the nearest EMA200 • Relative position versus higher-timeframe EMA200 levels • Directional context inferred from EMA structure The result is a priority-based list that highlights which asset may present: • Less immediate EMA resistance • Clearer directional context • Lower probability of early-session chop 📊 How to read the dashboard • Priority – Ranking based on opening context • Symbol – Evaluated instrument • Nearest EMA200 – Distance and side relative to price • Possible Path – Direction with less immediate EMA resistance • Bias – Strength of the higher-timeframe context Colored markers are used to provide fast visual identification of the highest-priority assets. ⚠️ Important notes • This is a context and selection tool, NOT a trading system • No buy/sell signals, alerts, TP, or SL logic are included • Designed to be used alongside your own execution methodology 🔧 Compatibility Due to Pine Script multi-symbol and multi-timeframe constraints, this public version is intentionally limited to a small set of symbols. TradingView Pro / Premium or higher is recommended for consistent performance. 🔗 Complementary tools This indicator can be complemented with Multi-Tool VWAP + EMAs (Multi-Timeframe) + Key Levels , which provides detailed visibility of multiple EMA levels, VWAP structure, and higher-timeframe reference zones directly on the chart. While Opening Path Selector helps decide which asset to focus on at the open, the complementary tool can assist with in-chart context and confirmation once an asset has been selected. Both tools are designed to serve different stages of the decision process and can be used independently.
Pine Script®指標
由mlicero提供
Commodity Channel Index CCI + EMA strategy ================================================================================ COMMODITY CHANNEL INDEX CCI + EMA STRATEGY - STRATEGY GUIDE 📊 ================================================================================ 💡 COLLABORATION & SUPPORT --------------------------- If you want to collaborate, have an idea for a strategy, or need help writing or customizing code, send an email to burdytrader@gmail.com or send me a message. Suggestions, ideas, and comments are always welcome! 🤝 I also develop automated trading codes for other trading platforms including: - CTrader (C#) - MetaTrader 4 (MQL4) - MetaTrader 5 (MQL5) If you need a strategy converted or developed for any of these platforms, feel free to contact me! ================================================================================ ⚠️ IMPORTANT: INSTRUMENT SELECTION 📈 ------------------------------------- This strategy performs BEST with currency pairs (forex). The CCI indicator works particularly well in the forex market due to the nature of currency movements and the effectiveness of the CCI in identifying overbought and oversold conditions in trending markets. Why Currency Pairs? 🎯 - CCI is highly effective in identifying reversals in forex markets - Currency pairs show clear overbought/oversold patterns - EMA filter (50/200) aligns well with major forex trends - High liquidity ensures reliable signal execution Performance Highlights: In specific currency pairs, when properly configured, this strategy can achieve: - Profit Factor: Over 2.0 - Win Rate: Up to 70% - Particularly effective pairs: USDCAD, EURUSD, GBPJPY While the strategy can work with other instruments (stocks, indices, commodities), currency pairs provide the most consistent and reliable results. For optimal performance, focus on major forex pairs with good liquidity and clear trending characteristics. ================================================================================ WHAT DOES THIS STRATEGY DO? 🎯 --------------------------- This strategy combines the Commodity Channel Index (CCI) with Exponential Moving Averages (EMA) to identify high-probability trading opportunities. The strategy uses CCI crossovers with a smoothing moving average and filters signals using EMA trend confirmation. The strategy automatically enters trades when CCI crosses the smoothing MA in specific zones, indicating potential trend reversals or continuations. HOW IT WORKS? ⚙️ --------------- 1. CCI CALCULATION 📈 The strategy calculates the Commodity Channel Index using: - CCI = (Price - SMA(Price, length)) / (0.015 × Deviation(Price, length)) - Default length: 20 periods - Source: HLC3 (typical price) The CCI shows: - Values above +100 = Overbought conditions - Values below -100 = Oversold conditions - Values around 0 = Neutral conditions 2. SMOOTHING MOVING AVERAGE 📊 A moving average is applied to the CCI to smooth out fluctuations: - Types available: SMA, EMA, SMMA (RMA), WMA, VWMA - Default: SMA with length 14 - Can be disabled (set to "None") This smoothed line acts as a reference for crossover signals. 3. EMA TREND FILTER 🎯 Two EMAs are calculated on the CCI: - EMA 50 (fast EMA) - EMA 200 (slow EMA) When the EMA filter is enabled: - LONG signals only occur when EMA50 > EMA200 (uptrend confirmation) - SHORT signals only occur when EMA50 < EMA200 (downtrend confirmation) This filter can be enabled/disabled via the "Use EMA Filter" option. 4. ENTRY CONDITIONS 🎲 LONG ENTRY (Buy Signal): - CCI crosses ABOVE the Smoothing MA (crossover) - CCI is between Lower Level (-100) and Middle Level (0) - EMA Filter: EMA50 > EMA200 (if filter enabled) - No existing positions (or close opposite positions first) SHORT ENTRY (Sell Signal): - CCI crosses BELOW the Smoothing MA (crossunder) - CCI is between Middle Level (0) and Upper Level (+100) - EMA Filter: EMA50 < EMA200 (if filter enabled) - No existing positions (or close opposite positions first) 5. POSITION MANAGEMENT 💰 The strategy uses a simple position management approach: - Only ONE position at a time (no pyramiding) - If a signal occurs in the opposite direction, closes existing position first - Then opens new position in the new direction - This prevents overexposure and simplifies risk management 6. TAKE PROFIT & STOP LOSS SETTINGS 🎯 The strategy uses percentage-based TP/SL: - Take Profit: 1.0% (default, configurable) - Stop Loss: 0.5% (default, configurable) - Risk/Reward Ratio: 2:1 (TP is double the SL) TP/SL are calculated once when the position opens and remain fixed. AVAILABLE PARAMETERS ⚙️ ----------------------- CCI SETTINGS: 1. CCI Length (Default: 20) - Period for CCI calculation - Lower values = More sensitive to recent price action - Higher values = More smoothed, less sensitive 2. CCI Source (Default: HLC3) - Price source for CCI calculation - Options: close, open, high, low, hlc3, hlcc4, ohlc4 3. CCI Lower Level (Default: -100) - Lower boundary for LONG entry zone - Typically -100 for oversold conditions 4. CCI Middle Level (Default: 0) - Neutral level separating LONG and SHORT zones 5. CCI Upper Level (Default: +100) - Upper boundary for SHORT entry zone - Typically +100 for overbought conditions SMOOTHING MA: 6. Type (Default: SMA) - Moving average type: None, SMA, EMA, SMMA (RMA), WMA, VWMA - Set to "None" to disable smoothing 7. Length (Default: 14) - Period for smoothing MA - Range: 7-28, step 7 EMA FILTER: 8. EMA 1 Length (Default: 50) - Fast EMA period applied to CCI 9. EMA 2 Length (Default: 200) - Slow EMA period applied to CCI 10. Use EMA Filter (Default: true) - Enable/disable EMA trend filter - When enabled: LONG only if EMA50 > EMA200, SHORT only if EMA50 < EMA200 RISK MANAGEMENT: 11. Take Profit (%) (Default: 1.0%) - Profit target as percentage of entry price - For LONG: Entry × (1 + TP%) - For SHORT: Entry × (1 - TP%) 12. Stop Loss (%) (Default: 0.5%) - Stop loss as percentage of entry price - For LONG: Entry × (1 - SL%) - For SHORT: Entry × (1 + SL%) VISUALIZATION 📊 --------------- The strategy displays in a separate panel below the price chart: 1. CCI LINE - Blue line showing the CCI value - Oscillates around zero 2. SMOOTHING MA LINE - Yellow line showing the smoothed CCI - Reference line for crossover signals 3. CCI LEVEL LINES - Red dashed line: Upper Level (+100) - Green dashed line: Lower Level (-100) - Yellow dashed line: Middle Level (0) 4. ENTRY SIGNALS - Green cross: LONG entry signal (when CCI crosses above MA) - Red cross: SHORT entry signal (when CCI crosses below MA) RECOMMENDED SETTINGS 🎯 ----------------------- To get started, you can use these settings: CCI SETTINGS: - CCI Length: 20 (default) - CCI Source: HLC3 (default) - CCI Lower Level: -100 (default) - CCI Middle Level: 0 (default) - CCI Upper Level: +100 (default) SMOOTHING MA: - Type: SMA (default) or EMA for faster response - Length: 14 (default) EMA FILTER: - EMA 1 Length: 50 (default) - EMA 2 Length: 200 (default) - Use EMA Filter: true (recommended for better signal quality) RISK MANAGEMENT: - Take Profit (%): 1.0% (adjust based on your risk/reward preference) - Stop Loss (%): 0.5% (adjust based on your risk tolerance) For more aggressive trading: - Reduce CCI Length to 14-16 - Reduce Smoothing MA Length to 7 - Disable EMA Filter For more conservative trading: - Increase CCI Length to 24-30 - Increase Smoothing MA Length to 21-28 - Keep EMA Filter enabled RECOMMENDED CURRENCY PAIRS 💱 ------------------------------ This strategy is optimized for currency pairs and performs exceptionally well on the following pairs when properly configured: TOP PERFORMING PAIRS: - USDCAD: Can achieve Profit Factor > 2.0 and Win Rate up to 70% - EURUSD: Excellent performance with consistent signals - GBPJPY: Strong results with proper EMA filter configuration These pairs have shown the best historical performance due to: - Clear trending characteristics - Good response to CCI overbought/oversold levels - Strong alignment with EMA 50/200 trend filter - High liquidity ensuring reliable execution When trading these pairs, use the default settings or slightly adjusted parameters based on the pair's volatility. Always backtest on historical data before using real money to find the optimal configuration for each specific pair. PRACTICAL EXAMPLE 📝 -------------------- Scenario: LONG Entry on EUR/USD 1. Market conditions: - Price: 1.1000 - CCI: -80 (in oversold zone) - Smoothing MA: -90 - CCI crosses above Smoothing MA (crossover occurs) - EMA50: -50, EMA200: -70 (EMA50 > EMA200, uptrend confirmed) 2. Strategy checks conditions: ✓ Smoothing MA enabled: Yes ✓ Crossover: Yes (CCI crosses above MA) ✓ CCI in range: Yes (-100 <= -80 <= 0) ✓ EMA Filter: Yes (EMA50 > EMA200) ✓ No existing position: Yes 3. Strategy opens position: - Direction: LONG (Buy) - Entry: 1.1000 (current close) - Take Profit: 1.1110 (1.0% above entry) - Stop Loss: 1.0945 (0.5% below entry) - Risk/Reward: 2:1 4. Outcome scenarios: - If price rises to 1.1110 → Take Profit hit (profit) - If price falls to 1.0945 → Stop Loss hit (loss limited) IMPORTANT NOTE ⚠️ ----------------- This strategy is a technical analysis tool based on CCI and EMA indicators. Like all trading strategies, it does NOT guarantee profits. Trading involves significant risks and you can lose money, including your entire investment. Past performance does not guarantee future results. Always: - Use appropriate risk management - Never risk more than you can afford to lose - Test the strategy on historical data (backtesting) before using real money - Start with small position sizes or paper trading - Understand that no strategy works 100% of the time - Consider market conditions, news events, and other factors - Keep a trading journal to learn and improve The author and contributors are NOT responsible for any losses incurred from using this strategy. Trading decisions are your own responsibility. Profits are NOT guaranteed, and losses are possible. LICENSE 📄 ---------- This code is open source and available for modification. You are free to use, modify, and distribute this strategy. If you republish or share a modified version, please kindly mention the original author. ================================================================================
Pine Script®策略
由Burdiga84提供
Delta Volume EMA Strategy ================================================================================ DELTA VOLUME EMA STRATEGY - STRATEGY GUIDE 📊 ================================================================================ 💡 COLLABORATION & SUPPORT --------------------------- If you want to collaborate, have an idea for a strategy, or need help writing or customizing code, send an email to burdytrader@gmail.com or send me a message. Suggestions, ideas, and comments are always welcome! 🤝 ================================================================================ ⚠️ IMPORTANT: INSTRUMENT SELECTION 📈 ------------------------------------- This strategy performs BEST with instruments that have a centralized data flow, such as Futures contracts. Centralized markets provide more accurate and reliable volume data, which is essential for Volume Delta analysis to work effectively. Why Futures? 🎯 - Centralized exchange = Accurate volume data - All trades flow through a single exchange - Volume reflects true buying/selling pressure - Better correlation between volume and price movements While the strategy can work with other instruments (stocks, forex, etc.), volume data quality may vary, which can affect the reliability of Volume Delta signals. For optimal performance, use Futures contracts or other instruments with centralized, high-quality volume data. ================================================================================ WHAT DOES THIS STRATEGY DO? 🎯 --------------------------- This strategy uses Volume Delta analysis combined with Exponential Moving Averages (EMA) to identify high-probability trading opportunities. The Volume Delta measures the difference between buying and selling pressure, helping to identify when strong institutional or smart money movements occur. The strategy automatically enters trades when volume delta reaches extreme levels, indicating potential trend continuation or reversal points. HOW IT WORKS? ⚙️ --------------- 1. VOLUME DELTA CALCULATION 📈 The strategy calculates the Volume Delta using the following formula: - Volume Ratio (v) = Current Volume / Previous Volume - EMA of Close (mac) = EMA(Close, MA Length) × Volume Ratio - EMA of Open (mao) = EMA(Open, MA Length) × Volume Ratio - Volume Delta (vd) = mac - mao The Volume Delta shows: - Positive values (green) = Buying pressure (buyers are more active) - Negative values (red) = Selling pressure (sellers are more active) 2. VOLUME DELTA MOVING AVERAGE 📊 The strategy calculates an EMA of the Volume Delta (vdma) to smooth out fluctuations and identify the overall trend of buying/selling pressure: - vdma = EMA(Volume Delta, EMA Length) - When vdma is above zero = Overall buying pressure - When vdma is below zero = Overall selling pressure 3. PERCENTILE-BASED ENTRY CONDITIONS 🎲 Instead of using fixed thresholds, the strategy uses percentile analysis to identify extreme volume delta movements: For LONG entries: - Analyzes seller volumes (negative volume delta) over the lookback period - Calculates the percentile threshold (default: 80th percentile) - Enters LONG when volume delta becomes positive AND exceeds the threshold - This indicates a strong shift from selling to buying pressure For SHORT entries: - Analyzes buyer volumes (positive volume delta) over the lookback period - Calculates the percentile threshold (default: 80th percentile) - Enters SHORT when volume delta becomes negative AND exceeds the threshold - This indicates a strong shift from buying to selling pressure 4. POSITION SIZING 💰 The strategy offers two position sizing methods: a) RISK VALUE (Fixed Risk in Dollars): - Calculates position size based on a fixed dollar risk amount - Formula: Position Size = Risk Amount / (Entry Price × Stop Loss %) - Ensures consistent risk per trade regardless of price level b) LOTS SIZE: - Uses a fixed lot size for all trades - Simple and straightforward approach - Useful when you want consistent position sizes 5. TAKE PROFIT & STOP LOSS SETTINGS 🎯 The strategy offers flexible TP/SL configuration in three modes: a) PERCENTAGE (%): - TP/SL calculated as a percentage of entry price - Example: 2% TP means entry price × 1.02 (for LONG) or × 0.98 (for SHORT) - Adapts automatically to different price levels b) CURRENCY: - TP/SL set as a fixed currency amount - Example: $100 TP means entry price + $100 (for LONG) or - $100 (for SHORT) - Useful for instruments with consistent price movements c) PIPS: - TP/SL set as a fixed number of pips - Automatically converts pips to price using the instrument's minimum tick - Ideal for forex and other pip-based instruments 6. AUTOMATIC TRADE EXECUTION ⚡ When entry conditions are met: - Opens a position (LONG or SHORT) at market price - Automatically sets Take Profit and Stop Loss based on selected mode - Sends an alert with all trade information - Only one position at a time (waits for current position to close) AVAILABLE PARAMETERS ⚙️ ---------------------- 1. MA LENGTH (Default: 10) - Length of the Exponential Moving Average used for close and open prices - Lower values = More sensitive to recent price action - Higher values = More smoothed, less sensitive 2. EMA LENGTH (Default: 20) - Length of the EMA applied to Volume Delta - Controls the smoothing of the volume delta signal - Lower values = Faster signals, more trades - Higher values = Slower signals, fewer but potentially more reliable trades 3. POSITION SIZE MODE - "Risk Value": Calculate position size based on fixed dollar risk - "Lots Size": Use fixed lot size for all trades 4. FIXED RISK IN $ (Default: 50) - Only used when Position Size Mode = "Risk Value" - The dollar amount you're willing to risk per trade - Strategy calculates position size automatically 5. LOT SIZE (Default: 0.01) - Only used when Position Size Mode = "Lots Size" - Fixed lot size for all trades 6. TAKE PROFIT MODE - "%": Percentage of entry price - "Currency": Fixed currency amount - "Pips": Fixed number of pips 7. STOP LOSS MODE - "%": Percentage of entry price - "Currency": Fixed currency amount - "Pips": Fixed number of pips 8. TAKE PROFIT / STOP LOSS VALUES - Different input fields appear based on selected mode - Configure TP and SL independently 9. VOLUME LOOKBACK PERIOD (Default: 20) - Number of bars used to calculate percentile thresholds - Lower values = More sensitive, adapts faster to recent conditions - Higher values = More stable, uses longer-term statistics 10. PERCENTILE THRESHOLD (Default: 80%) - The percentile level used to identify extreme volume delta movements - 80% means: only enter when volume delta exceeds 80% of recent values - Higher values = Fewer but potentially stronger signals - Lower values = More frequent signals VISUALIZATION 📊 --------------- The strategy displays on the chart: 1. VOLUME DELTA COLUMNS - Green columns = Positive volume delta (buying pressure) - Red columns = Negative volume delta (selling pressure) - Height represents the magnitude of buying/selling pressure 2. VOLUME DELTA MA AREA - Two overlapping area plots showing the smoothed volume delta - Black area (base layer) for overall visualization - Green area (when positive) = Overall buying pressure trend - Red area (when negative) = Overall selling pressure trend - Helps identify the dominant market sentiment 3. ZERO LINE - Horizontal line at zero - Helps visualize when buying/selling pressure crosses the neutral point ALERTS 🔔 -------- When enabled, the strategy sends alerts when a trade is opened. The alert message includes: - Direction: "Buy" for LONG positions or "Sell" for SHORT positions - Entry Price: The price at which the position was opened - TP (Take Profit): The target profit price - SL (Stop Loss): The stop loss price Example alert message: "Buy | Entry: 1.2050 | TP: 1.2250 | SL: 1.1950" Alerts can be configured in TradingView to send notifications via email, SMS, webhooks, or other platforms. RECOMMENDED SETTINGS 🎯 ----------------------- To get started, you can use these settings: STRATEGY PARAMETERS: - MA Length: 10 (default) - EMA Length: 20 (default) - Volume Lookback Period: 20 (default) - Percentile Threshold: 80% (default) POSITION SIZING: - Position Size Mode: "Risk Value" (for risk management) - Fixed Risk in $: Adjust based on your account size (e.g., 1-2% of account) - OR use "Lots Size" with 0.01 lots for small accounts TAKE PROFIT & STOP LOSS: - TP Mode: "%" (recommended for most instruments) - SL Mode: "%" (recommended for most instruments) - Take Profit (%): 2.0% (adjust based on your risk/reward preference) - Stop Loss (%): 1.0% (adjust based on your risk tolerance) For Forex: - Consider using "Pips" mode for TP/SL - Typical values: 20-50 pips TP, 10-30 pips SL For Stocks/Indices: - Use "%" mode for TP/SL - Typical values: 2-5% TP, 1-2% SL PRACTICAL EXAMPLE 📝 ------------------- Scenario: LONG Entry on EUR/USD 1. Market conditions: - Price: 1.1000 - Volume Delta becomes strongly positive - Volume Delta exceeds 80th percentile of recent seller volumes 2. Strategy calculates: - Entry Price: 1.1000 (current close) - Position Size Mode: "Risk Value" - Fixed Risk: $50 - Stop Loss Mode: "%" - Stop Loss: 1.0% - Position Size = $50 / (1.1000 × 0.01) = 4.55 lots 3. Strategy opens position: - Direction: LONG (Buy) - Entry: 1.1000 - Take Profit: 1.1220 (2% above entry) - Stop Loss: 1.0890 (1% below entry) - Alert sent: "Buy | Entry: 1.1000 | TP: 1.1220 | SL: 1.0890" 4. Outcome scenarios: - If price rises to 1.1220 → Take Profit hit (profit) - If price falls to 1.0890 → Stop Loss hit (loss limited to $50) IMPORTANT NOTE ⚠️ ----------------- This strategy is a technical analysis tool based on volume delta analysis. Like all trading strategies, it does NOT guarantee profits. Trading involves significant risks and you can lose money, including your entire investment. Past performance does not guarantee future results. Always: - Use appropriate risk management - Never risk more than you can afford to lose - Test the strategy on historical data (backtesting) before using real money - Start with small position sizes or paper trading - Understand that no strategy works 100% of the time - Consider market conditions, news events, and other factors - Keep a trading journal to learn and improve The author and contributors are NOT responsible for any losses incurred from using this strategy. Trading decisions are your own responsibility. Profits are NOT guaranteed, and losses are possible. LICENSE 📄 --------- This code is open source and available for modification. You are free to use, modify, and distribute this strategy. If you republish or share a modified version, please kindly mention the original author. ================================================================================
Pine Script®策略
由Burdiga84提供
IPO MA Start DetectorWhat is this tool? This indicator is designed specifically for Fresh IPOs and recently listed stocks. Standard indicators like the 50-day or 200-day Moving Averages do not appear on a chart until the stock has traded for enough days. This tool solves that problem by telling you exactly when these key levels will appear. It visualizes the "birth" of a Moving Average, both in the past and in the future. Key Features: Future Forecasting: Projects vertical lines into the future to show exactly when a specific MA (e.g., 50 DMA) will start calculating. Countdown Timer: Displays a countdown (e.g., "Starts in 12 days") so you don't have to count candles manually. Historical Start Points: Marks the exact candle where an MA (like the 10 or 20 EMA) first appeared historically. Clean & Subtle: Uses floating text without heavy background boxes to keep your chart clutter-free. Dark Mode Optimized: Uses bright, neon colors (Lime, Cyan, Orange) that pop against dark backgrounds. How it works: The script calculates the age of the stock (bar count). If the stock is younger than the required MA length (e.g., only 30 days old), it projects a dashed line to the 50th day. It anchors a label to that future date, showing you the countdown. Settings: Toggle MAs: Turn on/off 10 EMA, 20 EMA, 50 SMA, 100 SMA, or 200 SMA individually. Label Location: Customize where the future labels appear (Above Price, Below Price, or At Price) to avoid overlapping with candles. Use Case: Perfect for traders tracking new listings who are waiting for the "20 EMA pullback" or "50 DMA anchor" strategies to become valid.
Pine Script®指標
由bhanubisen1提供
RRR EMA Ignition BUY & SELL (Sideways-Proof)🔹 Description RRR EMA Ignition Buy & Sell is a trend-following, non-repainting indicator designed to capture high-probability trend ignition points while filtering out sideways market noise. Unlike basic EMA crossover systems that generate frequent false signals, this indicator uses a state-based trend engine, volatility filters, and trend strength confirmation to ensure signals appear only when a real directional move is underway. It is optimized for swing trading and positional trading on stocks and indices. 🔹 Core Logic 🔼 BUY Signal (Bullish Ignition) A BUY signal is generated only when all of the following conditions are met: EMA 21 confirms bullish regime above EMA 55 EMA 9 shows momentum above EMA 21 Price is trading above EMA 55 Candle closes bullish (confirmation) Trend strength is validated using ADX EMA 55 is sloping upward Price is sufficiently far from EMA 55 (ATR-based distance filter) Only one BUY per bullish trend leg (no repeated signals) 🔽 SELL Signal (Bearish Ignition) A SELL signal is the exact reverse of the BUY logic: EMA 21 confirms bearish regime below EMA 55 EMA 9 shows bearish momentum below EMA 21 Price is trading below EMA 55 Candle closes bearish ADX confirms trend strength EMA 55 is sloping downward ATR distance filter blocks sideways chop Only one SELL per bearish trend leg 🔹 Key Features ✅ Non-repainting (signals appear only after candle close) ✅ Sideways-market protection using ATR + ADX ✅ State-based logic (prevents repeated BUY/SELL spam) ✅ Handles strong V-reversals using trend re-arm logic ✅ Clean signals suitable for alerts and automation ✅ Works across stocks, indices, and ETFs 🔹 Best Use Cases 📈 Swing trading on Daily / 4H charts 📊 Large-cap stocks and indices (Nifty, Bank Nifty, SPX, NASDAQ) 🚫 Not intended for low-timeframe scalping 🎯 Designed for trend capture, not range trading 🔹 Recommended Settings Indian Stocks ADX Minimum: 18 ATR Multiplier: 0.6 – 0.8 US Indices ADX Minimum: 22 ATR Multiplier: 0.5 (Default settings work well for most instruments.) 🔹 How to Trade (Simple Guide) Use BUY signals to enter or add to long positions Use SELL signals to enter short positions or exit longs Combine with: Support/resistance Higher-timeframe bias Position sizing & risk management 🔹 Disclaimer This indicator is a decision-support tool, not financial advice. Always apply proper risk management and confirm signals with your own analysis.
Pine Script®指標
由RAGSTER123提供
Options Liquidity Meter (OLM)❓ The question behind this indicator When trading options, it is common to experience situations where price moves in the expected direction, yet the option contract does not increase in value as anticipated. This typically happens when one or more of the following conditions is missing: Insufficient liquidity participation Lack of volatility expansion Weak or passive order flow Options Liquidity Meter (OLM) was created to address this specific question: “If price moves from here, are there conditions for option premiums to actually expand?” 🎯 What this indicator does Options Liquidity Meter is a context tool, not a trading system. It evaluates whether the current market environment is favorable for option premium expansion , based on three core engines: Liquidity (Relative Volume) Measures whether price movement is supported by meaningful participation. Volatility State Identifies compression, release, and expansion phases, where options tend to respond differently. Order Flow Activity (OBV-based) Acts as a proxy for active vs. passive participation, helping filter hollow moves. These components are combined into a single, easy-to-read options context. 🟢🟡🔴 Options Context Output The indicator displays one consolidated state: RED — NO EXPANSION Price may move, but option premiums often do not respond. YELLOW — BUILDING Liquidity or volatility is developing. Conditions are improving but not fully aligned. GREEN — EXPANSION LIKELY Liquidity, volatility expansion, and active flow are aligned. This is a favorable environment for option premium expansion. The same logic is reflected visually through the background color and summarized in the dashboard. 📊 How to read the dashboard The dashboard shows: Liquidity: LOW / OK / HIGH Volatility: COMPRESSED / RELEASED / EXPANDING Order Flow: FLAT / ACTIVE Options Context: NO EXPANSION / BUILDING / EXPANSION LIKELY Below, a Background Color Meaning section explains what each color represents, making the indicator intuitive and educational. 📍 Where to apply this indicator Options Liquidity Meter must be applied to the underlying asset chart, such as: Indices (SPY, SPX, QQQ, etc.) Stocks Futures ETFs It is not designed to be applied to option contracts themselves. The indicator evaluates the market conditions of the underlying, which are the drivers that influence option premium behavior. Contract selection (strike, delta, gamma, expiration) remains the trader’s responsibility. 🧠 How to use it Use your own methodology to define: Direction Structure Entries and exits Use Options Liquidity Meter to evaluate: Whether the current environment supports option premium expansion If the context is RED, be cautious — price may move without rewarding options. If the context is GREEN, the environment is statistically more favorable for options responsiveness. 🔗 Complementary tools Options Liquidity Meter is designed to complement, not replace, other tools. It works well alongside: Opening Path Selector (EMA200 Context Tool) For deciding which asset offers the cleanest directional context. Multi-Tool VWAP + EMAs (Multi-Timeframe) + Key Levels For in-chart structure, bias, and reference levels. Each tool addresses a different stage of the decision process and can be used independently. ⚠️ Important notes This indicator provides context only It does not generate trading signals No indicator guarantees results Use at your own risk.
Pine Script®指標
由mlicero提供
Moving Average Structure ZigZag [Stable & Filtered] (日本語説明) このインジケーターは、移動平均線（MA）の転換に基づき、相場の「真の構造」を可視化するために開発されました。 通常のZigZagのように価格の単純な反転に依存せず、「MAのトレンド転換 ＋ 指定した値幅の到達」という2つの条件を用いることで、レンジ相場の細かなノイズ（ダマシ）を排除し、ダウ理論に基づいた重要な高値・安値だけを結びます。 💡 主な機能 MAタイプの切り替え: SMA, EMA, HMA, VW-HMAなど、目的に合わせたトレンド感度を選択可能。 値幅フィルター（Min Deviation）: 添付画像のように、小さな値動きをカットし、大きな市場構造だけを抽出します。 価格アクションへの追従: ラインはMAの数値ではなく、期間内の実最高値・最安値を正確に結び、高値更新時には自動で延伸されます。 🛠 活用シーン 環境認識: 上位足での大きな波形を確認し、現在のフェーズを定義。 ノイズ除去: 市場の主要な節目（レジサポ候補）の特定。 ダウ理論の視覚化: 高値・安値の切り上がり・切り下がりを明確化。 (English Description) This indicator was developed to visualize the "True Market Structure" based on Moving Average (MA) reversals. Unlike standard ZigZag which relies solely on price reversals, this tool combines MA Trend Reversals and a Minimum Deviation filter to eliminate market noise and highlight significant swing highs and lows based on Dow Theory. 💡 Key Features Multiple MA Types: Select from SMA, EMA, HMA, VW-HMA, etc., to match your preferred trend sensitivity. Min Deviation Filter: As shown in the attached image, it filters out minor price fluctuations to extract only the major market waves. Price Action Tracking: The lines connect the actual High/Low prices within the period, not the MA values themselves. Lines automatically extend when a trend continues to new highs/lows. 🛠 Use Cases Market Context: Identify major wave patterns on higher timeframes to define the current phase. Noise Reduction: Pinpoint key market levels and potential support/resistance. Dow Theory Visualization: Clearly visualize higher highs/lows and trend shifts. Settings MA Type: Choose the type of Moving Average. Moving Average Length: The lookback period for structure. Min Deviation (Pips): The threshold to filter noise. Adjust according to the volatility of the pair.
Pine Script®指標
由Hybrid_trader_Ichi提供
Quality-Controlled Trend Strategy v2 (Expectancy Focused)This script focuses on quality control rather than curve-fitting. No repainting, no intrabar tricks, no fake equity curves. It uses confirmed-bar entries, ATR-based risk, and clean trend logic so backtests reflect what could actually be traded live. If you publish scripts, this is the minimum structure worth sharing. Why this script exists TradingView’s public scripts are flooded with: repainting indicators no stop-loss logic curve-fit entries that collapse live strategies that look good only in hindsight This script is intentionally boring but honest. No repainting. No intrabar tricks. No fake equity curves The goal is quality control, not hype. What this strategy enforces ✔ Confirmed bars only ✔ Single source of truth for indicators ✔ Fixed risk structure ✔ No signal repainting ✔ Clean exits with unique IDs ✔ Works on any liquid market Trading Logic (simple & auditable) Trend filter EMA 50 vs EMA 200 Entry Pullback to EMA 50 RSI confirms momentum (not oversold/overbought) Risk ATR-based stop Fixed R:R One position at a time This is the minimum bar for a strategy to be considered publish-worthy. Why this helps TradingView quality Most low-value scripts fail because they: hide repainting logic skip exits entirely use inconsistent calculations rely on hindsight candles This strategy forces discipline: every signal is confirmed every trade has defined risk behavior is repeatable across symbols & timeframes If more scripts followed this baseline, TradingView’s public library would be far more usable.
Pine Script®策略
由AIScripts提供
THE ELVINATORTHE ELVINATOR is my trend-following momentum indicator built on the 20 EMA, 50 EMA, and 200 EMA, designed for trading **XAUUSD during the New York session (9:30–17:00 NY time), Monday through Friday**. **How to trade it:** * **Trend filter:** Only take **longs above the 200 EMA** and **shorts below the 200 EMA**. This keeps trades aligned with Gold’s dominant direction. * **Long setups:** A **20 EMA cross above the 50 EMA** signals bullish momentum. Best entries come after a pullback into the 20–50 EMA zone followed by strong continuation candles. * **Short setups:** A **20 EMA cross below the 50 EMA** signals bearish momentum. Look for pullbacks into the EMA zone and rejection before continuation lower. * **Timing:** Focus on NY open and high-volume moves. Avoid choppy conditions and late-session exhaustion. * **Risk & exits:** Place stops beyond recent swings or EMA structure. Targets can be prior highs/lows or scaled with trend continuation. THE ELVINATOR is built for **structure, patience, and disciplined execution**, allowing traders to capitalize on Gold’s volatility without chasing noise.
Pine Script®指標
由ElvinLing提供
ATR Bands (MA Distance)ATR Bands (MA Distance) plots volatility-based bands at a multiple of ATR away from a selected moving average. Unlike percentage envelopes or standard deviation bands, this indicator measures distance from the moving average using ATR, representing the market’s normal “breathing range” rather than statistical probability. Key Features The center line is a selectable moving average (EMA, SMA, RMA/Wilder, or WMA). Upper and lower bands are calculated as: Moving Average ± ATR × Multiplier Band width automatically adapts to changing market volatility. Designed for consistent use across different markets and timeframes without parameter re-optimization. Non-repainting: all values are calculated only from confirmed historical bars. Intended Use ATR Bands (MA Distance) is best used as a context and preparation tool , not as a direct entry or exit signal. Typical use cases include: Identifying areas where price is extended relative to its recent volatility. Visualizing normal vs. stretched price distance from the moving average. Supporting range-based analysis or trade preparation when combined with other indicators (e.g., oscillators). Important Notes / How NOT to Use This indicator does NOT generate buy or sell signals by itself . Touching or crossing a band does not imply an automatic reversal. In strong trending markets, price may stay outside the bands for extended periods. ATR Bands should not be interpreted as overbought/oversold levels on their own. This indicator does NOT repaint. Once a bar is closed, its values will not change. For best results: Use ATR Bands as a preparation zone, then wait for confirmation from your own entry logic. Disable or ignore band-based mean-reversion ideas during strong trend conditions. Concept Summary (Short) ATR Bands (MA Distance) visualize how far price has moved from its moving average in terms of volatility, without repainting and without relying on percentage deviation or statistical assumptions. Optional Short Description (Preview) Volatility-based, non-repainting ATR bands plotted at a distance from a moving average. Designed for market context and trade preparation — not standalone signals.
Pine Script®指標
由SunnySpots提供
ChillLax Distance From Moving Average// show the % distance from the moving average, in colorful histogram // you can choose : // : the moving average of the close, default to 200 ma // : sma or ema, default to sma // : choose calculation from open or high or low or close (to the ma), default is close // : threshold % above/below ma, default is 70%. when the stock is above/below // this threshold, histogram is red (default) // : otherwise, histogram is blue (default) // Why this? In William O'neil's book, How to make money in stock, 4th edition, page 264, // in Climax Top: // 200-day moving average line. Some stocks may be sold when they are // 70% to 100% or more above their 200-day moving average price line
Pine Script®指標
由chilllaxtrader提供
Multi-Indicator DashboardMulti-timeframe trading dashboard overlay on your chart. Analyzes Trend, Momentum, Swing, Strength, Direction, Volatility, and delivers a final VIEW (Bullish/Bearish/Flat) across 5 key timeframes. Perfect for quick multi-TF alignment checks! W → D → 2H → 1H → 15M Features Color-Coded Cells: Green (Bullish), Red (Bearish), Gray (Neutral). Historical Mode: Toggle "Enable Historical View" → Slider picks N bars back (chart TF-aware: e.g., 10 bars = 2.5H on 15M). Yellow vertical line + date label marks the exact bar Quick Setup Add to chart → Customize inputs. Historical: Enable + slide "Bars Back" for past data snapshots. Views Update Live: Real-time on current/historical bars.
Pine Script®指標
由prabhu_ken01提供