Simple ema and sma cross
A simple EMA and SMA cross is an indicator that uses alpha from two moving averages: SMA (simple moving average) and EMA (exponential moving average).
The point where the EMA and SMA cross is usually a good place to enter a position.
The indicator includes smoothing settings to help you find the right calibration for your trading needs.
It also marks signals with triangles for easier use and includes alerts so you never miss a cross.
移動平均線
ATR Bands (MA Distance)ATR Bands (MA Distance) plots volatility-based bands at a multiple of ATR away from a selected moving average.
Unlike percentage envelopes or standard deviation bands, this indicator measures distance from the moving average using ATR, representing the market’s normal “breathing range” rather than statistical probability.
Key Features
The center line is a selectable moving average (EMA, SMA, RMA/Wilder, or WMA).
Upper and lower bands are calculated as:
Moving Average ± ATR × Multiplier
Band width automatically adapts to changing market volatility.
Designed for consistent use across different markets and timeframes without parameter re-optimization.
Non-repainting: all values are calculated only from confirmed historical bars.
Intended Use
ATR Bands (MA Distance) is best used as a context and preparation tool , not as a direct entry or exit signal.
Typical use cases include:
Identifying areas where price is extended relative to its recent volatility.
Visualizing normal vs. stretched price distance from the moving average.
Supporting range-based analysis or trade preparation when combined with other indicators (e.g., oscillators).
Important Notes / How NOT to Use
This indicator does NOT generate buy or sell signals by itself .
Touching or crossing a band does not imply an automatic reversal.
In strong trending markets, price may stay outside the bands for extended periods.
ATR Bands should not be interpreted as overbought/oversold levels on their own.
This indicator does NOT repaint. Once a bar is closed, its values will not change.
For best results:
Use ATR Bands as a preparation zone, then wait for confirmation from your own entry logic.
Disable or ignore band-based mean-reversion ideas during strong trend conditions.
Concept Summary (Short)
ATR Bands (MA Distance) visualize how far price has moved from its moving average in terms of volatility, without repainting and without relying on percentage deviation or statistical assumptions.
Optional Short Description (Preview)
Volatility-based, non-repainting ATR bands plotted at a distance from a moving average.
Designed for market context and trade preparation — not standalone signals.
%R Exhaustion + VixFix with 200MA Regime%R Exhaustion + VixFix with 200MA Regime Strategy
A momentum-based trading strategy that combines regime filtering,
volatility analysis, and oversold/overbought conditions for
optimal entry and exit timing.
Key Components:
• MA 200 Regime Filter: Identifies bearish market regimes when
price stays below MA 200 for extended periods, preventing longs
during downtrends
• Percent R Exhaustion: Uses dual-timeframe Williams %R to detect
oversold reversals and overbought exhaustion zones
• Williams VixFix: Volatility-based indicator that identifies
market bottoms and filtered entry conditions during panic selling
• Matrix Oscillator: Confirms exit signals when market becomes
overbought
Entry Logic:
- Long entries trigger when: (1) Not in bearish regime, (2) %R
shows oversold or reversal, (3) VixFix filtered entry confirms
- Position pyramiding with scaling: Initial entry at configured %
of equity, subsequent entries match current position size
(doubling effect)
Exit Logic:
- Partial sells when both overbought conditions and Matrix sell
signal align
- Breakeven stop loss activates after profitable partial sells or
when entering bearish regime
- Gradual profit-taking using configurable portion percentages
Position Management:
- Configurable initial entry size and sell portions
- Pyramiding up to 5 entries with exponential position sizing
- Dynamic stop loss management for capital preservation
LevelsAutomatic levels with alerts, based on:
1) SMAs
2) Anchored Volume Profile (AVP)
3) Pivot Points Standard
Use this to set automated alerts in conjunction with manually added levels
KalmanX3 (by beardsnbarbs)KalmanX3 Indicator - User Guide
Overview
The KalmanX3 indicator is designed to help traders easily identify uptrends and downtrends by combining multiple Exponential Moving Averages (EMAs) with an advanced Kalman filter. This creates a powerful trend-following system with clear visual signals.
***This is a reading guide — not a trading advice. ***
───────✧❁✧──────────────✧❁✧───────
What You'll See on Your Chart
1. EMA Lines (Moving Averages)
• EMA 1 (default: 21-period, cyan) - Fast-moving average
• EMA 2 (default: 55-period, red) - Slower-moving average
• EMA 3 & 4 (144/233) - Additional moving averages for confluence
• Colored Fill - The area between EMA 1 and EMA 2 shows trend direction:
o Cyan fill = EMA 1 above EMA 2 (bullish)
o Red fill = EMA 1 below EMA 2 (bearish)
───────✧❁✧──────────────✧❁✧───────
2. Kalman Filter Line
• Appears as colored line on the chart
• Adapts to market conditions using advanced filtering
• Color indicates trend strength:
o Green = Strong uptrend (EMAs and Kalman agree on bullish)
o Red = Strong downtrend (EMAs and Kalman agree on bearish)
o Yellow = Transitional/choppy (mixed signals)
───────✧❁✧──────────────✧❁✧───────
3. Signal Dots
• Green diamond below bar = Kalman filter crossed above selected EMA (buy signal)
• Red diamond above bar = Kalman filter crossed below selected EMA (sell signal)
───────✧❁✧──────────────✧❁✧───────
How to Use It
Basic Trading Strategy
For Uptrends (Long positions):
1. Wait for EMA 1 to cross above EMA 2 (cyan fill appears)
2. Confirm that Kalman line turns green (strong trend confirmation)
3. Enter when you see a green signal dot (Kalman crosses above selected EMA)
4. Exit when Kalman line turns yellow or red, or when you see a red signal dot
For Downtrends (Short positions):
1. Wait for EMA 1 to cross below EMA 2 (red fill appears)
2. Confirm that Kalman line turns red (strong trend confirmation)
3. Enter when you see a red signal dot (Kalman crosses below selected EMA)
4. Exit when Kalman line turns yellow or green, or when you see a green signal dot
Conservative Approach
• Only trade when all indicators agree: EMA fill color matches Kalman color
• Avoid trading during yellow (neutral) periods - this indicates choppy/transitional markets
Aggressive Approach
• Take signals as soon as you see the colored dots appear
• Use tighter stops and manage risk carefully
───────✧❁✧──────────────✧❁✧───────
Key Settings to Adjust
EMA Settings
• EMA 1 & 2 Lengths - Adjust based on your timeframe:
o Short-term trading: 8/21 or 13/34
o Medium-term: 21/55 (default)
• MA Type - Choose between SMA, EMA, WMA, or ALMA (ALMA is smoothest)
• Signal EMA - Select which EMA triggers the signal dots (EMA 1 is fastest, EMA 2 is slower)
Kalman Filter Settings
• Noise Measurement (default: 500)
o Lower values (100-300) = More responsive, faster signals, more noise
o Higher values (500-800) = Smoother, fewer false signals, slower response
o Adjust based on market volatility and your trading style
• Kalman Filter Model
o Standard - Basic model, works well in most conditions
o Volume Adjusted - Adapts to volume changes (good for stocks)
o Parkinson Adjusted - Adapts to price range volatility (good for crypto/forex)
• Trend Lookback & Strength Smoothness
o Lower values = More sensitive to recent changes
o Higher values = Smoother, longer-term trend identification
Tips for Best Results
1. Use Multiple Timeframes - Check higher timeframes for overall trend direction
2. Combine with Support/Resistance - Signals are stronger near key levels
3. Watch for Confirmation - Best signals occur when Kalman color matches EMA fill color
4. Avoid Choppy Markets - When you see frequent yellow (neutral) colors, consider staying out
5. Backtest Your Settings - Adjust parameters based on your specific asset and timeframe
───────✧❁✧──────────────✧❁✧───────
FAQs
Q: Why is the Kalman line yellow so often? A: This means EMAs and Kalman are disagreeing - the market is likely in transition or choppy. Wait for clear green or red confirmation.
Q: Should I use EMA 1 or EMA 2 for signals? A: EMA 1 gives earlier but potentially less reliable signals. EMA 2 gives slower but more confirmed signals. Test both on your asset.
Q: What's the best Noise Measurement setting? A: Start with 500. Lower it (to 200-300) for faster markets like crypto. Raise it (to 600-800) for slower markets like stocks.
Q: Can I use this on any timeframe? A: Yes, but adjust EMA lengths accordingly. Shorter timeframes need shorter EMAs, longer timeframes need longer EMAs.
───────✧❁✧──────────────✧❁✧───────
Alert Setup
You can set up TradingView alerts for:
• Kalman crosses selected EMA up (buy signal)
• Kalman crosses selected EMA down (sell signal)
This allows you to be notified immediately when trading opportunities appear.
───────✧❁✧──────────────✧❁✧───────
Remember: No indicator is perfect. Always use proper risk management, consider market context, and combine with your own analysis for best results.
Note: I am not a professional trader, nor have extensive experience with pinescript. I made this script to provide additional assistance to my Oracle V3 script, but this turned out to be a pretty good visual aid in general and works well with different strategies.. Best of luck to you and thank you for giving Oracle a test run. Cheers!.
Quality-Controlled Trend Strategy v2 (Expectancy Focused)This script focuses on quality control rather than curve-fitting.
No repainting, no intrabar tricks, no fake equity curves.
It uses confirmed-bar entries, ATR-based risk, and clean trend logic so backtests reflect what could actually be traded live.
If you publish scripts, this is the minimum structure worth sharing.
Why this script exists
TradingView’s public scripts are flooded with:
repainting indicators
no stop-loss logic
curve-fit entries that collapse live
strategies that look good only in hindsight
This script is intentionally boring but honest.
No repainting.
No intrabar tricks.
No fake equity curves
The goal is quality control, not hype.
What this strategy enforces
✔ Confirmed bars only
✔ Single source of truth for indicators
✔ Fixed risk structure
✔ No signal repainting
✔ Clean exits with unique IDs
✔ Works on any liquid market
Trading Logic (simple & auditable)
Trend filter
EMA 50 vs EMA 200
Entry
Pullback to EMA 50
RSI confirms momentum (not oversold/overbought)
Risk
ATR-based stop
Fixed R:R
One position at a time
This is the minimum bar for a strategy to be considered publish-worthy.
Why this helps TradingView quality
Most low-value scripts fail because they:
hide repainting logic
skip exits entirely
use inconsistent calculations
rely on hindsight candles
This strategy forces discipline:
every signal is confirmed
every trade has defined risk
behavior is repeatable across symbols & timeframes
If more scripts followed this baseline, TradingView’s public library would be far more usable.
MTF EMAs: 200 EMA (1hr & 15m), 8 EMA (5m)Using the 200 ema on 1hr and 15 min timeframe to ID entry points for scalping.
DewaSMC ELITE DewaSMC ELITE — Prepare Entry + EMA Alerts
DewaSMC ELITE is a Smart Money Concept (SMC) trading indicator designed for scalping and intraday trading on 5-minute and 15-minute timeframes.
It helps traders anticipate entries early, confirm direction with EMA filters, and manage trades with automatic TP/SL levels and advanced JSON alerts.
Key Features
Smart Money Concept (SMC)
- Automatic BOS (Break of Structure) and CHoCH (Change of Character)
- Bullish & bearish market structure detection
- Break confirmation using candle body or wick
Prepare Entry System (Early Warning)
- PREPARE ENTRY zones appear before an actual structure break
- Provides early alerts so traders can get ready before entry
- Prepare zones are automatically removed once a valid entry occurs
EMA Confirmation Filter
- Built-in EMA 9 & EMA 20
- Optional strict EMA alignment:
- LONG: EMA 9 above EMA 20 + price above EMA
- SHORT: EMA 9 below EMA 20 + price below EMA
- EMA confirmation status is shown in the info table and alerts
Automatic TP & SL (ATR-Based)
- Entry is set at the broken structure level
- TP1, TP2, TP3, and Stop Loss are dynamically calculated using ATR
- Visual Risk Zone & Reward Zone
- TP hit tracking with visual check marks (✓)
Trade Information Table
- Displays real-time trade details:
- Trade direction (LONG / SHORT)
- Entry price, Stop Loss, TP1–TP3
- Risk & reward percentages
- EMA confirmation status
- Risk : Reward ratio
Advanced JSON Alerts (No Spam)
- BUY & SELL entry alerts
- Clean JSON format (ready for bots / webhooks)
- Anti-spam signal lock
Filters:
- Timeframe 5m & 15m
- Volatility filter (ATR-based)
- EMA confirmation (YES / NO is always included)
Recommended Timeframes & Markets
Best performance on:
- 5m & 15m timeframes
- Forex, Gold (XAUUSD), and Crypto (BTC, ETH)
ELITE Mode Features:
- Maximum trades per day
- Cooldown between trades
- Kill switch to disable all entry alerts
Who Is This Indicator For?
✔ Scalpers & intraday traders
✔ Smart Money Concept (SMC) traders
✔ Traders who want early entry preparation
✔ Bot & webhook automation users
Disclaimer
This indicator is not financial advice.
Always apply proper risk management.
Trading performance depends on market conditions, spread, and execution quality.
Moving Average Structure ZigZag [Stable & Filtered]
(日本語説明)
このインジケーターは、移動平均線（MA）の転換に基づき、相場の「真の構造」を可視化するために開発されました。 通常のZigZagのように価格の単純な反転に依存せず、「MAのトレンド転換 ＋ 指定した値幅の到達」という2つの条件を用いることで、レンジ相場の細かなノイズ（ダマシ）を排除し、ダウ理論に基づいた重要な高値・安値だけを結びます。
💡 主な機能
MAタイプの切り替え: SMA, EMA, HMA, VW-HMAなど、目的に合わせたトレンド感度を選択可能。
値幅フィルター（Min Deviation）: 添付画像のように、小さな値動きをカットし、大きな市場構造だけを抽出します。
価格アクションへの追従: ラインはMAの数値ではなく、期間内の実最高値・最安値を正確に結び、高値更新時には自動で延伸されます。
🛠 活用シーン
環境認識: 上位足での大きな波形を確認し、現在のフェーズを定義。
ノイズ除去: 市場の主要な節目（レジサポ候補）の特定。
ダウ理論の視覚化: 高値・安値の切り上がり・切り下がりを明確化。
(English Description)
This indicator was developed to visualize the "True Market Structure" based on Moving Average (MA) reversals. Unlike standard ZigZag which relies solely on price reversals, this tool combines MA Trend Reversals and a Minimum Deviation filter to eliminate market noise and highlight significant swing highs and lows based on Dow Theory.
💡 Key Features
Multiple MA Types: Select from SMA, EMA, HMA, VW-HMA, etc., to match your preferred trend sensitivity.
Min Deviation Filter: As shown in the attached image, it filters out minor price fluctuations to extract only the major market waves.
Price Action Tracking: The lines connect the actual High/Low prices within the period, not the MA values themselves. Lines automatically extend when a trend continues to new highs/lows.
🛠 Use Cases
Market Context: Identify major wave patterns on higher timeframes to define the current phase.
Noise Reduction: Pinpoint key market levels and potential support/resistance.
Dow Theory Visualization: Clearly visualize higher highs/lows and trend shifts.
Settings
MA Type: Choose the type of Moving Average.
Moving Average Length: The lookback period for structure.
Min Deviation (Pips): The threshold to filter noise. Adjust according to the volatility of the pair.
[CyberPips] Trend and SignalsTrend and Signals Suite is a trend-following analysis indicator designed to help traders identify directional bias and potential market shifts.
The script combines:
• An adaptive ATR-based trend framework
• Optional signal filtering using volume, momentum, and volatility conditions
• Visual EMA cloud layers to provide trend alignment and pullback context
• Optional bar coloring for quick directional awareness
Signals generated by this indicator are intended for analytical and educational purposes only. They may update on the currently forming candle and should not be interpreted as guaranteed trade entries or financial advice.
This tool is designed to support discretionary decision-making and does not provide performance guarantees.
Bar Countdown ClockBar Countdown Clock
Description:
Displays the remaining time for the current bar on the chart. The countdown label follows the previous EMA5 price to stay stable during high-volatility markets. Font size and label position are fully customizable. Works well on BTC, Gold, Forex, and other trading instruments.
How to Use:
Add the indicator to your chart.
Adjust Clock Color, Font Size, and X Offset to suit your preference.
The label will automatically track the previous EMA5 price.
The countdown updates in real-time until the current bar closes.
Tips:
Increase X Offset if the label overlaps the current bar.
For high-volatility instruments, the label remains stable by following EMA5.
EMA Length can be adjusted to change the anchor point for the label.
Dual MTF B-Xtrender EMAsMTF B-Xtrender Color EMAs
Dual moving averages that change color based on multi-timeframe B-Xtrender histogram signals
This indicator applies B-Xtrender histogram logic (inspired by the original B-Xtrender oscillator) to color two independent moving averages based on different timeframe trend conditions. It provides a unique visual way to see trend alignment across multiple timeframes directly on your price chart.
What It Does
The indicator plots two customizable moving averages (EMA, SMA, or HMA) where each line changes color based on whether the B-Xtrender histogram is above or below zero on its respective timeframe:
Fast MA (default 34 EMA): Colors based on daily B-Xtrender signals
Light blue when B-Xtrender histogram > 0 (bullish)
Light purple when B-Xtrender histogram < 0 (bearish)
Slow MA (default 155 EMA): Colors based on 3-day B-Xtrender signals
White when B-Xtrender histogram > 0 (bullish)
Dark orange when B-Xtrender histogram < 0 (bearish)
B-Xtrender Logic
This indicator uses the B-Xtrender histogram calculation:
Short-term Xtrender: RSI of (EMA 5 - EMA 20), with RSI period of 15, minus 50
The histogram crossing above/below zero determines bullish/bearish coloring
Each MA independently evaluates its own timeframe's B-Xtrender signal
Key Features
✓ Multi-Timeframe Analysis: Each MA can reference different timeframes for B-Xtrender signals
✓ Flexible MA Types: Choose between EMA, SMA, or HMA for both fast and slow lines
✓ Customizable Lengths: Adjust MA periods to fit your trading style
✓ Independent Signals: Fast and slow MAs color independently based on their respective timeframes
✓ Clean Overlay: Thin lines that don't clutter your chart
✓ Optional Bar Coloring: Can enable bar colors based on fast MA signal
How To Use
Trend Alignment: When both MAs show bullish colors (light blue + white), it suggests alignment across timeframes
Divergence: When MAs show different colors, it indicates potential timeframe divergence
Customization: Adjust timeframes to match your trading strategy (e.g., 1H + 4H for intraday, or Daily + Weekly for swing trading)
Visual Enhancement Tip
For better visual distinction between bullish and bearish conditions, you can manually adjust the line styles after adding the indicator to your chart:
Click the indicator settings (gear icon)
Go to the "Style" tab
When the MAs display their bearish colors (light purple for Fast MA, dark orange for Slow MA), change those plot styles from "Solid" to "Dashed"
This creates a clear visual: solid lines = bullish, dashed lines = bearish
This optional styling makes trend changes instantly recognizable at a glance.
Settings
Fast MA Length (default: 34)
Fast MA Type (EMA/SMA/HMA)
Fast MA Timeframe (default: Daily)
Slow MA Length (default: 155)
Slow MA Type (EMA/SMA/HMA)
Slow MA Timeframe (default: 3-Day)
Optional bar coloring
Notes
B-Xtrender histogram parameters are fixed: Short L1=5, L2=20, L3=15, Long L1=20, L2=15
This is a visual trend tool, not a standalone trading system
Works on all timeframes and instruments
Colors are customizable in indicator settings after adding to chart
Credit: This indicator incorporates B-Xtrender oscillator logic as its signal mechanism, applied in a multi-timeframe moving average context.
50 SMA Slope Change with TrendlineThe 50 MA is a good indicator if medium term price direction whether bull or bear. It shows the 50 MA and the rate of change. A positive slope is green and negative slope is red.
My first script I made and it's nothing special just something I thought would be interesting
Ultimate Lines Statistical Backtest @MaxMaseratiUltimate lines (MAs/MACD/VWAP,DWA etc..) Statistical Backtest
This is a comprehensive statistical backtesting tool that allows traders to objectively measure the performance of 27+ different trading lines across multiple timeframes and sessions. Instead of guessing which moving averages, VWAPs, or volume levels actually work for your trading style, this indicator provides hard data showing exactly how price behaves around each line at specific times of day.
The indicator solves a critical problem: most lines create whipsaws in choppy markets, but knowing which lines have the highest continuation rates vs reversal rates at specific session times helps you avoid false signals and focus on setups with proven statistical edges.
🎯 LINES YOU CAN TEST
MMM Core Lines:
Mid MA: Trend velocity tracker using simple moving average
MMPD Line: Premium/Discount change-of-direction indicator
Fair Value Golden Ratio: 0.618 equilibrium level between premium and discount zones
Volume-Based Lines:
VWAP Daily/Weekly: Volume-weighted average price (daily and weekly sessions)
Volume POC Multi-TF: Multi-timeframe Point of Control (highest volume price level)
Volume POC Weekly: Weekly momentum pivot based on volume distribution
Range Midpoints:
Range Midpoint 50: 50-period high/low midpoint
Range Midpoint 14 TF1/TF2: Configurable timeframe range midpoints with smoothing options
Moving Averages (10 MA Types):
MACD Fast (12) / Signal (26): Standard MACD moving averages
Fast MA 20 / Mid MA 50 / Slow MA 200: Classic trend-following averages
Available MA Types: SMA, EMA, WMA, HMA, DEMA, TEMA, LSMA, KAMA, ALMA, VWMA
Volatility Indicators:
MVM Upper/Lower Bands: Momentum-based volatility bands with adaptive option
HVC Bullish/Bearish: High Volume Candle support/resistance levels
Ultimate Suite Advanced Lines:
DWAP (Delta Weighted Average Price): Directional volume-weighted price with upper/lower bands
HVN (High Volume Node): High-frequency trading node detection
Hybrid Line: Volume-weighted momentum composite
Trend Filter: Two-pole smoothing filter for trend clarity
STL Lines:
iBuSTL / iBeSTL: Internal Bullish/Bearish Structural Trend Liquidity levels
⚙️ HOW TO TEST
Select Lines: Check the boxes for lines you want to analyze (Mid MA, VWAP Daily, Volume POC, etc.)
Choose Times: Enable tracking for specific session times (default: 8:30 AM, 9:30 AM, 10:00 AM, Daily Close - EST)
Set Lookback: Choose how many days of historical data to analyze (default: 60 days)
Enable Pattern Analysis: Turn on "Enable Pattern Analysis" in settings
Wait for Data: The indicator needs 20 bars after each signal time to complete analysis
Review Statistics: Check the statistics table for detailed breakdowns
📈 STATISTICS EXPLAINED
For Each Tracked Time, You'll See:
🟢 Above Selected Lines (X samples):
Continued↑: Price stayed above the lines = bullish continuation
Reversed↓: Price broke below the lines = reversal/rejection
→Kept Going↓: After reversing down, price continued lower (bars 11-20)
→Stalled: After reversing down, price came back up (consolidation)
Neutral: Price didn't make a clear move either way
🔴 Below Selected Lines (X samples):
Continued↓: Price stayed below the lines = bearish continuation
Reversed↑: Price broke above the lines = reversal/support bounce
→Kept Going↑: After reversing up, price continued higher (bars 11-20)
→Stalled: After reversing up, price came back down (consolidation)
Neutral: No clear directional move
⭐ Star Ratings: Show which outcome happens most frequently (best probability)
🔬 HYBRID DETECTION SYSTEM (ADVANCED)
When enabled, the indicator uses a multi-signal composite scoring system that goes beyond simple percentage movements:
Signal A - % Movement Direction (40% weight):
Measures the strength and direction of price movement. Strong directional moves (>0.8%) score higher, while opposite-direction moves score negatively.
Signal B - Inside Candles (30% weight):
Detects true consolidation by counting how many candles close within a defined range. High inside-candle counts indicate choppy, stalled price action rather than clean continuation.
Signal C - Successive Closes (30% weight):
Tracks momentum persistence by counting consecutive closes in the expected direction. Long streaks (6+ bars) indicate strong follow-through, while breaks in the sequence suggest weakness.
Composite Score Classification:
⭐⭐⭐ Strong (75-100 points): All three signals align - high-confidence pattern
⭐⭐ Moderate (50-75 points): Two signals agree - reliable pattern
⭐ Weak (25-50 points): Mixed signals - lower confidence
⚠️ Strong Stalled (0-25 points): Signals show consolidation/reversal
This provides nuanced pattern detection that identifies not just IF a pattern succeeded, but HOW STRONGLY it performed.
💡 INTERPRETING RESULTS
Good Lines Show:
High continuation % when price is above/below (>60% is strong)
Clean "Kept Going" patterns after reversals (>50% indicates reliable rejection)
Low stalled % (less whipsaw/consolidation)
Consistent patterns across multiple times (validates the line's reliability)
Poor Lines Show:
50/50 continuation vs reversal (coin flip = no edge)
High stalled % (lots of whipsaw/false signals)
Inconsistent patterns across different times (unreliable)
Example Interpretation:
9:30 AM - VWAP Daily (120 samples)
🟢 Above:
Continued↑ 75 (62.5%) ⭐ BEST
Reversed↓ 30 (25.0%)
Meaning: When price is above VWAP Daily at 9:30 AM, it continues higher 62.5% of the time - this is a statistically strong bullish signal for that session time.
🎯 PRACTICAL VALUE
Solves the Whipsaw Problem:
Most moving averages and lines work beautifully in trending markets but create endless false signals in choppy, range-bound conditions. By analyzing specific session times and continuation vs reversal patterns, you can:
Identify high-probability setups: Focus on lines that show >60% continuation at your preferred trading times
Avoid weak signals: Skip lines with high stall rates or 50/50 outcomes
Time your entries better: Know which session times produce the cleanest patterns
Combine complementary lines: Stack multiple high-scoring lines for confluence
Adapt to market conditions: Switch to different lines when market structure changes
Real-World Application:
Instead of blindly trading VWAP crosses or MA bounces, you'll have objective data showing: "At 9:30 AM on ES, when price is above Mid MA + VWAP Daily + Volume POC, it continues higher 68% of the time with strong momentum (⭐⭐⭐)." This transforms discretionary guesswork into data-driven decision making.
⚙️ LINE DEFINITIONS
Moving Averages: Smooth price data over X periods to identify trend direction and dynamic support/resistance.
VWAP: Anchored average price weighted by volume - institutional traders' benchmark for "fair value."
Volume POC (Point of Control): Price level with the most traded volume - represents maximum market acceptance.
Fair Value Golden Ratio: Fibonacci 0.618 level between recent premium (high) and discount (low) - equilibrium zone.
DWAP (Delta Weighted): Price average weighted by buying vs selling volume delta - shows directional money flow.
Range Midpoints: Geometric center of recent high/low range - mean reversion pivot.
Volatility Bands: Envelope around momentum lines showing normal price deviation ranges.
HVN (High Volume Node): Automated detection of high-volume price clusters - institutional accumulation/distribution zones.
Note: This indicator is purely for statistical analysis and backtesting. It does not generate trade signals or provide entry/exit recommendations. Use the statistics to inform your own trading decisions and strategy development.
ChillLax Distance From Moving Average// show the % distance from the moving average, in colorful histogram
// you can choose :
// : the moving average of the close, default to 200 ma
// : sma or ema, default to sma
// : choose calculation from open or high or low or close (to the ma), default is close
// : threshold % above/below ma, default is 70%. when the stock is above/below
// this threshold, histogram is red (default)
// : otherwise, histogram is blue (default)
// Why this? In William O'neil's book, How to make money in stock, 4th edition, page 264,
// in Climax Top:
// 200-day moving average line. Some stocks may be sold when they are
// 70% to 100% or more above their 200-day moving average price line
Fractal Market Geometry [JOAT]
Fractal Market Geometry
Overview
Fractal Market Geometry is an open-source overlay indicator that combines fractal analysis with harmonic pattern detection, Fibonacci retracements and extensions, Elliott Wave concepts, and Wyckoff phase identification. It provides traders with a geometric framework for understanding market structure and identifying potential reversal patterns with multi-factor signal confirmation.
What This Indicator Does
The indicator calculates and displays:
Fractal Detection - Identifies fractal highs and lows using Williams-style pivot analysis with configurable period
Fractal Dimension - Calculates market complexity using range-based dimension estimation
Harmonic Patterns - Detects Gartley, Butterfly, Bat, Crab, Shark, Cypher, and ABCD patterns using Fibonacci ratios
Fibonacci Retracements - Key levels at 38.2%, 50%, and 61.8%
Fibonacci Extensions - Projection level at 161.8%
Elliott Wave Count - Simplified wave counting based on pivot detection (1-5)
Wyckoff Phase - Volume-based phase identification (Accumulation, Markup, Distribution, Neutral)
Golden Spiral Levels - ATR-based support and resistance levels using phi (1.618) ratio
Trend Detection - EMA crossover trend identification (20/50 EMA)
How It Works
Fractal detection uses a configurable period to identify swing points:
detectFractalHigh(simple int period) =>
bool result = true
float centerVal = high
for i = 0 to period - 1
if high >= centerVal or high >= centerVal
result := false
break
Harmonic pattern detection uses Fibonacci ratio analysis between swing points. Each pattern has specific ratio requirements:
Gartley: AB 0.382-0.618, BC 0.382-0.886, CD 1.27-1.618
Butterfly: AB 0.382-0.5, BC 0.382-0.886, CD 1.618-2.24
Bat: AB 0.5-0.618, BC 1.13-1.618, CD 1.618-2.24
Crab: AB 0.382-0.618, BC 0.382-0.886, CD 2.24-3.618
Shark: AB 0.382-0.618, BC 1.13-1.618, CD 1.618-2.24
Cypher: AB 0.382-0.618, BC 1.13-1.414, CD 0.786-0.886
Wyckoff phase detection analyzes volume relative to price movement:
wyckoffPhase(simple int period) =>
float avgVol = ta.sma(volume, period)
float priceChg = ta.change(close, period)
string phase = "NEUTRAL"
if volume > avgVol * 1.5 and math.abs(priceChg) < close * 0.02
phase := "ACCUMULATION"
else if volume > avgVol * 1.5 and math.abs(priceChg) > close * 0.05
phase := "MARKUP"
else if volume < avgVol * 0.7
phase := "DISTRIBUTION"
phase
Signal Generation
Signals use multi-factor confirmation for accuracy:
BUY Signal: Fractal low + Uptrend (EMA20 > EMA50) + RSI 30-55 + Bullish candle + Volume confirmation
SELL Signal: Fractal high + Downtrend (EMA20 < EMA50) + RSI 45-70 + Bearish candle + Volume confirmation
Pattern Detection: Label appears when harmonic pattern completes at current bar
Dashboard Panel (Top-Right)
Dimension - Fractal dimension value (market complexity measure)
Last High - Most recent fractal high price
Last Low - Most recent fractal low price
Pattern - Current harmonic pattern name or NONE
Elliott Wave - Current wave count (Wave 1-5) or OFF
Wyckoff - Current market phase or OFF
Trend - BULLISH, BEARISH, or NEUTRAL based on EMA crossover
Signal - BUY, SELL, or WAIT status
Visual Elements
Fractal Markers - Small triangles at fractal highs (down arrow) and lows (up arrow)
Geometry Lines - Dashed lines connecting the most recent fractal high and low
Fibonacci Levels - Clean horizontal lines at 38.2%, 50%, and 61.8% retracement levels
Fibonacci Extension - Horizontal line at 161.8% extension level
Golden Spiral Levels - Support and resistance lines based on ATR x 1.618
3D Fractal Field - Optional depth layers around swing levels (OFF by default)
Harmonic Pattern Markers - Small diamond shapes when Crab, Shark, or Cypher patterns detected
Pattern Labels - Text label showing pattern name when detected
Signal Labels - BUY/SELL labels on confirmed multi-factor signals
Input Parameters
Fractal Period (default: 5) - Bars on each side for fractal detection
Geometry Depth (default: 3) - Complexity of geometric calculations
Pattern Sensitivity (default: 0.8) - Tolerance for pattern ratio matching
Show Fibonacci Levels (default: true) - Display retracement levels
Show Fibonacci Extensions (default: true) - Display extension level
Elliott Wave Detection (default: true) - Enable wave counting
Wyckoff Analysis (default: true) - Enable phase detection
Golden Spiral Levels (default: true) - Display spiral support/resistance
Show Fractal Points (default: true) - Display fractal markers
Show Geometry Lines (default: true) - Display connecting lines
Show Pattern Labels (default: true) - Display pattern name labels
Show 3D Fractal Field (default: false) - Display depth layers
Show Harmonic Patterns (default: true) - Display pattern markers
Show Buy/Sell Signals (default: true) - Display signal labels
Suggested Use Cases
Identify potential reversal zones using harmonic pattern completion
Use Fibonacci levels for entry, stop-loss, and target planning
Monitor Wyckoff phases for accumulation/distribution awareness
Track Elliott Wave counts for trend structure analysis
Use fractal dimension to gauge market complexity
Wait for multi-factor signal confirmation before entering trades
Timeframe Recommendations
Best on 1H to Daily charts. Lower timeframes produce more fractals but with less significance. Higher timeframes provide stronger levels and more reliable signals.
Limitations
Harmonic pattern detection uses simplified ratio ranges and may not match all textbook definitions
Elliott Wave counting is basic and does not include all wave rules
Wyckoff phase detection is volume-based approximation
Fractal dimension calculation is simplified
Signals require fractal confirmation which has inherent lag equal to the fractal period
Open-Source and Disclaimer
This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management.
- Made with passion by officialjackofalltrades
Options Liquidity Meter (OLM)❓ The question behind this indicator
When trading options, it is common to experience situations where price moves in the expected direction, yet the option contract does not increase in value as anticipated.
This typically happens when one or more of the following conditions is missing:
Insufficient liquidity participation
Lack of volatility expansion
Weak or passive order flow
Options Liquidity Meter (OLM) was created to address this specific question:
“If price moves from here, are there conditions for option premiums to actually expand?”
🎯 What this indicator does
Options Liquidity Meter is a context tool, not a trading system.
It evaluates whether the current market environment is favorable for option premium expansion , based on three core engines:
Liquidity (Relative Volume)
Measures whether price movement is supported by meaningful participation.
Volatility State
Identifies compression, release, and expansion phases, where options tend to respond differently.
Order Flow Activity (OBV-based)
Acts as a proxy for active vs. passive participation, helping filter hollow moves.
These components are combined into a single, easy-to-read options context.
🟢🟡🔴 Options Context Output
The indicator displays one consolidated state:
RED — NO EXPANSION
Price may move, but option premiums often do not respond.
YELLOW — BUILDING
Liquidity or volatility is developing. Conditions are improving but not fully aligned.
GREEN — EXPANSION LIKELY
Liquidity, volatility expansion, and active flow are aligned.
This is a favorable environment for option premium expansion.
The same logic is reflected visually through the background color and summarized in the dashboard.
📊 How to read the dashboard
The dashboard shows:
Liquidity: LOW / OK / HIGH
Volatility: COMPRESSED / RELEASED / EXPANDING
Order Flow: FLAT / ACTIVE
Options Context: NO EXPANSION / BUILDING / EXPANSION LIKELY
Below, a Background Color Meaning section explains what each color represents, making the indicator intuitive and educational.
📍 Where to apply this indicator
Options Liquidity Meter must be applied to the underlying asset chart, such as:
Indices (SPY, SPX, QQQ, etc.)
Stocks
Futures
ETFs
It is not designed to be applied to option contracts themselves.
The indicator evaluates the market conditions of the underlying, which are the drivers that influence option premium behavior.
Contract selection (strike, delta, gamma, expiration) remains the trader’s responsibility.
🧠 How to use it
Use your own methodology to define:
Direction
Structure
Entries and exits
Use Options Liquidity Meter to evaluate:
Whether the current environment supports option premium expansion
If the context is RED, be cautious — price may move without rewarding options.
If the context is GREEN, the environment is statistically more favorable for options responsiveness.
🔗 Complementary tools
Options Liquidity Meter is designed to complement, not replace, other tools.
It works well alongside:
Opening Path Selector (EMA200 Context Tool)
For deciding which asset offers the cleanest directional context.
Multi-Tool VWAP + EMAs (Multi-Timeframe) + Key Levels
For in-chart structure, bias, and reference levels.
Each tool addresses a different stage of the decision process and can be used independently.
⚠️ Important notes
This indicator provides context only
It does not generate trading signals
No indicator guarantees results
Use at your own risk.
Ocean's Zero-Point [Pro]Ocean's Zero-Point – The Physics of Market Tension
Stop chasing price. Start trading the snap.
Ocean's Zero-Point is a next-generation oscillator designed for precision mean-reversion trading. Unlike standard RSI or Stochastic indicators that rely on lagging momentum averages, this tool measures Market Tension, the statistical distance between price and its "Fair Value."
It doesn't just tell you if the market is moving; it tells you how "stretched" the rubber band is and the exact moment it's about to snap back.
🌊 Key Features
The Zero-Point Engine (Statistical Tension) - Markets are elastic. They expand and contract around a mean. Standard indicators fail because they don't account for volatility. This engine uses a normalized Z-Score Algorithm to calculate exactly how many Standard Deviations price has moved away from the baseline.
The Logic: When the wave hits +2.0 or -2.0, the market is statistically overextended (the rubber band is fully stretched).
Result: You identify true extremes, filtering out weak fluctuations.
Zero-Lag Baseline (HMA) - To find the "Zero Point" (Fair Value), precision is key.
Standard Indicators: Use SMA or EMA, which lag behind price.
This Tool: Uses the Hull Moving Average (HMA).
Result: The baseline reacts almost instantly to price changes, ensuring the tension reading is always synchronized with the current market tick.
Liquid Flow Visualization - Designed for instant readability. The indicator uses a dynamic Liquid Gradient system to visualize market energy.
Gold Energy (Bottom): Deep oversold tension. Represents "Discount" zones and potential bullish reversals.
Sky Blue Energy (Top): Peak bullish tension. Represents "Premium" zones and potential bearish reversals.
Liquid Glow: Fills the area between the wave and the zero line, allowing you to gauge momentum density at a glance.
Fractal Pivot Detection (Internal Logic) - The engine continuously scans for fractal pivot points within the tension wave to identify structural turning points in real-time.
⚙️ Settings & Customization
Tension Length: Controls the lookback period for the Fair Value baseline.
Snap Sensitivity: Adjusts the Standard Deviation threshold (Mult). Higher values = Rarer, stronger signals. Lower values = More frequent scalping signals.
Visuals: Fully customizable "Bullish Energy" (Sky Blue) and "Bearish Energy" (Gold) colors.
Volatility Squeeze + EMA Trend Filter [Day Trading]Identify explosive breakouts before they happen. This indicator detects low-volatility consolidations (squeezes) that precede powerful price moves, filtered by trend direction for higher-probability signals.
█ FEATURES
- Squeeze detection using Bollinger Bands inside Keltner Channels
- Momentum histogram visualization in dashboard
- 200 EMA trend filter (toggleable) - longs above, shorts below
- Trading hours filter with timezone support
- Buy/sell signals on chart with customizable size
- 5 visual themes (Nebula Core, Aurora Borealis, Ice Giant, Solar Flare, Supernova)
- Real-time dashboard with squeeze state, momentum, and signal bias
█ HOW IT WORKS
1. Bollinger Bands compress inside Keltner Channels = "Squeeze" (consolidation)
2. Squeeze releases = imminent breakout
3. Momentum direction determines trade direction
4. 200 EMA filter ensures you trade with the trend
5. Session filter keeps you in optimal trading hours
█ SIGNAL LOGIC
BUY: Momentum crosses above zero OR squeeze releases with rising positive momentum + price above 200 EMA
SELL: Momentum crosses below zero OR squeeze releases with falling negative momentum + price below 200 EMA
█ RECOMMENDED USE
- Best timeframes: 5-minute, 15-minute for day trading
- Best instruments: NQ, MNQ, ES, MES, SPY, QQQ
- Best session: 9:30 AM - 11:00 AM ET (morning momentum)
- Works on any market with sufficient volatility
█ INPUTS
- BB/KC Length and Multipliers (default: 20/2.0 and 20/1.5)
- 200 EMA trend filter toggle
- Trading session hours and timezone
- Signal size and visual theme selection
Based on John Carter's TTM Squeeze concept.
DM for access.
MTF EMA50/200 // ADX (Auto TF Pairing) with SL/TP // v6Strategy overview (EMA50/EMA200 + ADX, multi-timeframe):
This system trades only in the direction of the higher-timeframe trend and uses the current chart timeframe for precise entries.
Trend filter (Higher TF):
Bull trend: EMA50 > EMA200 and ADX ≥ threshold → only LONGs allowed
Bear trend: EMA50 < EMA200 and ADX ≥ threshold → only SHORTs allowed
If ADX is below the “no-trend” threshold, the market is considered choppy and trades are avoided.
Entry (Lower TF / chart TF):
Enter only when the chart timeframe confirms momentum in the HTF direction using one of:
Touch: price pulls back to EMA50 and closes back on the trend side
Rejection: stricter “touch + reject” near EMA50
Cross: close crosses EMA50 in the trend direction
Stop Loss (structure + volatility):
LONG: below the safer of last swing low or EMA50, minus an ATR buffer
SHORT: above the safer of last swing high or EMA50, plus an ATR buffer
Take Profit (risk-based):
Targets are set as multiples of risk (R) from entry:
TP1 = 2R (default)
TP2 = 3R (optional)
The indicator plots only the latest trade’s Entry (black line), Stop (red dashed), and TP (green dashed), and it auto-pairs the chart timeframe with a “next level up” higher timeframe for the trend filter.
NQ/MNQ 5min BotThis invite-only strategy is built for traders who want a systematic approach to Nasdaq futures (NQ/MNQ). It combines VWAP (Volume Weighted Average Price), EMA (Exponential Moving Average), and ATR (Average True Range) filters to identify high-probability intraday setups.
🔑 Key Features
Trend Confirmation: Multi-timeframe EMA signals for directional bias.
VWAP Integration: Anchored VWAP zones act as dynamic support/resistance.
ATR-Based Risk Management: Stops and targets adapt to market volatility.
Intraday Focus: Designed for day traders and scalpers in NQ/MNQ futures.
Backtested Logic: Strategy has been optimized with robust historical testing.
✅ Who This Is For
Futures traders looking for consistency on Nasdaq contracts.
Traders who want clear entry and exit rules without second-guessing.
Those seeking scalable risk management that adapts to volatility.
Precision EMA Position Engine PRO🟦 Precision EMA Position Engine PRO
Structured Long-Term Trend Interpretation & Position Discipline Framework
Product Class: Trend Structure Framework, Position Trading Support, Momentum Exit Awareness
Designed For: Long-term traders, position investors, disciplined trend followers across Crypto, Forex, Stocks, Commodities, and Indices
🟦 Overview
Precision EMA Position Engine PRO is a professional trend interpretation framework engineered to bring clarity, structure, and disciplined awareness to long-term trading and position management.
Using layered EMA structure, visual environmental confirmation, and momentum exit awareness, it helps traders understand when markets transition from neutral to structured bullish phases — and when strength begins weakening.
The purpose is not to predict markets, but to provide a calm, organized, easy-to-read visual environment that encourages rational decisions instead of emotional reactions.
🟦 Concepts
The system is built on five disciplined principles:
Macro Trend Structure
Defines the foundational trend environment.
Micro Structural Alignment
Confirms whether shorter structure supports the dominant trend.
Momentum Confirmation
Ensures trends are supported rather than artificially drifting.
Color-Based Market Clarity
Visual states make trend health easier to interpret.
Discipline Over Emotion
The framework supports patience, maturity of structure, and controlled exits.
🟦 Key Features
✔ Multi-layer EMA structure clarity
✔ Visual bullish and weakening condition zones
✔ Entry 1 signal for full bullish alignment
✔ Entry 2 signal for major structural transition confirmation
✔ Customizable exit system using EMA 5 vs EMA 8 logic
✔ Optional candle-close confirmation to reduce noise
✔ Compatible with all markets and timeframes DAILY TO MONTH
This is a professional position framework, not a signal toy.
🟦 Customization & Flexibility
Users retain full control while the original design philosophy remains intact.
Trend Framework
• Adjustable EMA lengths
• Structured fill and line color control
Signals
• Fully customizable entry and exit colors
• Adjustable signal placement
• Independent exit-engine configuration
Behavior Control
• Optional candle-close confirmation
• Visual clarity optimization settings
This allows personal adaptation while maintaining disciplined structure integrity.
🟦 Usage Guidance
Recommended workflow:
1️⃣ Apply to chart
2️⃣ First understand macro EMA backbone structure
3️⃣ Look for alignment rather than forcing trades
4️⃣ Allow bullish structure to properly mature
5️⃣ Treat exit momentum warnings as early awareness signals
6️⃣ Combine with broader analytical logic and personal strategy
Higher timeframes generally provide stronger stability, clearer context, and fewer emotional decisions.
🟦 Example Scenario
The market transitions from sideways behavior into organized bullish structure.
EMAs align positively.
Supportive bullish fill zones appear.
Entry confirmation triggers.
A position is maintained while strength persists.
Eventually, EMA 5 weakens relative to EMA 8.
An exit warning appears — before deep structural collapse occurs — giving the trader time to reassess, manage exposure, and act rationally.
🟦 Settings Overview
EMA Backbone
• EMA 50 and EMA 100 macro structure foundation
Structural Layers
• Layered EMA fills establishing visual clarity
Signals
• Entry 1 confirmation
• Entry 2 structural transition validation
Exit Engine
• EMA 5 vs EMA 8 momentum weakening
• Candle-close optional security
Customization Panel
• Colors
• Signal placement
• Confirmation preferences
🟦 Conclusion
Precision EMA Position Engine PRO is created for traders who value clarity, structure, discipline, and responsible trading behavior.
It does not promise miracles or unrealistic outcomes.
It delivers a logical, organized visual framework that supports better long-term trading confidence, consistency, and understanding.
🟦 Disclaimer
This tool does not provide financial advice and does not guarantee performance outcomes.
Markets involve risk. Users remain responsible for execution, risk management, and trading decisions.
