立即開始

移動平均線

MA Momentum Score by WizkaThis is my explorative study script which I have named as MA Momentum Score. It calculates one score number (-10,+10) to describe the price and MA structure. It gives points on the order and direction of price and three moving averages so that bullish order (Price>MA20>MA50>MA200) gives +1 point to each pair, and bearish order gives -1 point. There are 6 comparisons (price and 3 MAs against each other). Addition to this +1 point is given if the direction of each is upwards, and -1 if downwards. So, altogether score can be from -10p (fully bearish structure) to +10p (fully bullish structure). This is shown as blue line in the indicator. It uses classic SMAs of 20,50,200 and it is called Slow score. Next, the similar score is calculated for faster MAs (5,12,26) and it is called Fast score (orange line). Finally, the differential Fast-Slow is calculated and visualized as histogram. Green, when Fast>Slow (bullish), and Red, when Fast
Pine Script®指標
由wizka提供
Momentum Trader ToolboxMomentum Traders Toolbox Pro combines three daily-anchored tools into one overlay so momentum traders can see trend, extension, and volatility context without stacking multiple indicators. What it includes: Daily EMAs: plots the 8/21/50 EMAs calculated on the daily timeframe on any chart. A fill between the 8 and 21 EMA helps visualize short-term momentum. ADR/ATR table: optional rows show daily ATR, ADR%, distance from the daily low, distance from the selected daily EMA (default 8), and an extension reading: EMA extension (x) = (EMA distance %) ÷ (ADR%). The extension value is color-coded by thresholds you can customize. VIX regime: pulls daily VIX and calculates a z-score over your lookback, then labels the environment as risk-on, risk-off, or neutral. The VIX values are daily-based by design, so on non-daily charts the table shows a reminder to use the daily timeframe for the VIX score. Notes: Daily values can update intraday until the daily candle closes. The EMA plots include an optional Offset; keep it at 0 if you don’t want shifted lines.
Pine Script®指標
由SPYDERMARKET提供
stelaraX - TrendFriendstelaraX – TrendFriend is a fast, visually clean trend indicator based on a 6-moving-average cluster. Market direction is determined using a robust fast-vs-slow system: as soon as multiple fast MAs consistently move above or below the baseline, TrendFriend switches into a bullish or bearish state. The current trend becomes instantly visible through a dynamic MA cloud with gradient bands, trend-colored candles, and precise trend-change labels (“Bull” / “Bear”). Integrated alerts allow for push notifications, email alerts, or webhook automation whenever the trend changes. TrendFriend is ideal as a trend filter for pullback trades, trend continuation setups, and structured directional bias decisions across Forex, crypto, indices, and commodities. This script is provided by invitation only. 🔹 Request Access: Please send me a E-Mail to hello@stelarax.com including your TradingView username and a short note about which market and timeframe you intend to use the indicator on. 🔹 Access Approval: Access is granted manually after review. Once approved, you will receive a notification directly from TradingView. 🔹 Important Notes: The source code is protected and not publicly accessible. Redistribution, duplication, or resale of this script is strictly prohibited. This indicator does not constitute financial or investment advice and is intended solely as an analysis and visualization tool. Use of this script is at your own risk. 🔹 Support & Updates: Active users receive access to updates and ongoing improvements as part of the continuous development of stelaraX.
Pine Script®指標
由TMB_Invest提供
Bandes de Bollinger - Couleurs DynamiquesDescription This indicator is an enhanced version of the classic Bollinger Bands. It allows traders to instantly visualize market volatility states (expansion or compression) by coloring each band independently based on its own direction. Unlike standard indicators that color the background or use a single condition for both lines, this script focuses on the slope of each individual band to provide a more precise reading of price dynamics. How It Works The script analyzes the position of each band relative to its previous value (n-1): Upper Band: Turns GREEN when it moves up (expanding upwards) and RED when it moves down (contracting downwards). Lower Band: Turns GREEN when it moves down (expanding downwards) and RED when it moves up (contracting upwards). Signal Interpretation This independent coloring helps identify three market phases at a glance: Volatility Expansion (Blast off): Both bands are GREEN. This typically occurs during a breakout or a violent impulsive move where bands open up in opposite directions. Compression (Squeeze): Both bands are RED. The upper band is sloping down and the lower band is sloping up. The market is consolidating, often signaling an impending explosive move. Trend: Colors are mixed. For instance, during a strong uptrend, the Upper Band will be Green (rising), but the Lower Band will often be Red (rising as well to follow price, rather than expanding downwards). Settings Users retain standard Bollinger Bands configuration: Length: Period for the Moving Average (Default: 20). Multiplier: Standard Deviation multiplier (Default: 2.0). Source: Price data used (Default: Close). Note This tool is purely visual and does not repaint. It is designed to assist traders who rely on volatility analysis, mean reversion, or breakout strategies.
Pine Script®指標
由drawit提供
Triple MA Alignment [odnac] Overview The Triple MA Alignment indicator is a powerful tool designed to visualize and analyze the alignment of three moving averages (MAs) with customizable types and lengths. It helps traders identify trends and potential reversal points by displaying the relative positions of three MAs and marking specific alignment patterns on the chart. This indicator is ideal for traders looking to understand market momentum and trend direction through moving average crossovers and alignments. Features Customizable Moving Average Types: Choose from Simple Moving Average (SMA), Exponential Moving Average (EMA), Smoothed Moving Average (SMMA/RMA), Weighted Moving Average (WMA), or Volume-Weighted Moving Average (VWMA). Flexible MA Lengths: Adjust the lengths of three moving averages to suit your trading strategy (default lengths: 7, 25, 99). Alignment Detection: Identifies six unique MA alignment patterns (A1 to A6) based on the relative positions of the three MAs. Visual Cues: Plots MAs on the chart with distinct colors and marks alignment patterns with shapes and labels for easy interpretation. Special Signals: Highlights specific transitions (e.g., "P" and "B" for A1, "P" and "S" for A4) to indicate potential trend changes or continuations. How It Works The indicator calculates three moving averages based on user-selected type and lengths. It then analyzes their relative positions to detect six possible alignment patterns: A1 (1-2-3): MA1 > MA2 > MA3 (Strong bullish alignment) A2 (2-1-3): MA2 > MA1 > MA3 A3 (2-3-1): MA2 > MA3 > MA1 A4 (3-2-1): MA3 > MA2 > MA1 (Strong bearish alignment) A5 (3-1-2): MA3 > MA1 > MA2 A6 (1-3-2): MA1 > MA3 > MA2 When an alignment occurs, a shape (square, diamond, or circle) is plotted at the top or bottom of the chart, depending on the pattern. Additionally, when the alignment changes, a text label (e.g., "2", "3", "5", "6") is displayed to highlight the new pattern. Special signals ("P", "B", "S") are plotted for specific transitions to indicate potential trading opportunities. Settings Show Triple MA: Toggle to display or hide the three moving averages on the chart. Show Triple MA Edge: Toggle to display or hide alignment shapes and labels. MA Length 1, 2, 3: Set the periods for the three moving averages (default: 7, 25, 99). MA Type: Select the moving average type (SMA, EMA, SMMA, WMA, VWMA). Usage Add the Indicator: Apply the indicator to your TradingView chart. Adjust Settings: Customize MA lengths and type to match your trading style (e.g., shorter lengths for scalping, longer for swing trading). Interpret Alignments: A1 (Green Square): Indicates a strong bullish trend, often a signal to consider long positions. A4 (Red Square): Indicates a strong bearish trend, often a signal to consider short positions. A2, A3, A5, A6: Represent transitional or consolidation phases, useful for identifying potential reversals or continuations. Special Signals (P, B, S): Watch for "P" (Pullback), "B" (Breakout), or "S" (Sell) labels for additional context. Combine with Other Tools: Use alongside support/resistance levels, volume analysis, or other indicators for confirmation.
Pine Script®指標
由odnac提供
ML-Inspired Adaptive Momentum Strategy (TradingView v6)This strategy demonstrates an adaptive momentum approach using volatility-normalized trend strength. It is designed for educational and analytical purposes and uses deterministic, fully transparent logic compatible with Pine Script v6. ML-Inspired Concept (Educational Context) Pine Script cannot train or execute real machine-learning models. Instead, this strategy demonstrates ML-style thinking by: Converting price data into features Normalizing features to account for volatility differences Producing a bounded confidence score Applying thresholds for decision making This is not predictive AI and does not claim forecasting capability. Strategy Logic EMA is used to measure directional bias EMA slope represents momentum change ATR normalizes the slope (feature scaling) A clamped score between −1 and +1 is generated Trades trigger only when the score exceeds defined thresholds Risk & Execution Position size capped at 5% equity Commission and slippage included for realistic testing Signals are calculated on closed bars only Purpose This script is intended to help traders explore adaptive momentum concepts and understand how feature normalization can be applied in systematic trading strategies.
Pine Script®策略
由AIScripts提供
Market Conditions Panel [ARC Trade] ## 📊 ARC Trade – Bias & Decision Panel **ARC Trade Panel** is a **decision-support indicator** designed to help traders evaluate market conditions **before entering a trade**. This is **not a signal indicator**. Its purpose is to answer a simple but critical question: > *Should I trade now, or should I wait?* --- ### 🔍 What does the panel show? **• Market Direction (At a Glance)** The panel header updates dynamically: * **BULL** * **BEAR** * **RANGE** This allows traders to instantly understand the current market environment without overloading the chart. --- **• Timeframe Alignment (HTF ↔ LTF)** Checks whether higher timeframe and lower timeframe are aligned. When timeframes are not aligned, the panel automatically warns the trader to be cautious. --- **• Market Structure (MSS & BOS Logic)** Market Structure Shift and continuation logic are evaluated internally. This helps reduce fake breakouts and premature entries. --- **• Market Warning (Trade Decision Guidance)** The panel produces clear decision messages: * **BUY possible** * **SELL possible** * **WATCH / WAIT** These messages are generated by combining structure, trend, alignment, volatility, and market conditions. --- **• Trend Strength (ADX – Explained)** Instead of showing raw ADX values only, the panel classifies trend strength: * Weak * Moderate * Strong This helps traders avoid range-bound conditions and low-quality setups. --- **• Risk Mode (Position Size Psychology)** Automatically evaluates market risk and displays: * **LOW** * **MEDIUM** * **HIGH** Risk Mode is based on volatility expansion, daily range usage, ADX strength, and timeframe alignment. The goal is to guide traders toward **better position sizing decisions**, not just entries. --- **• Signal Freshness (Timing Awareness)** When a BUY or SELL becomes available, the panel tracks how fresh the signal is: * Fresh * Normal * Late This feature helps prevent chasing late entries. --- **• Daily Movement & Remaining Potential (ATR-based)** Shows how much of the daily range has already been used and estimates the remaining potential movement. This helps traders avoid entering trades when the market is already overextended. --- ### 🎯 Who is this panel for? ✔ Traders who want structure and discipline ✔ Traders who want to reduce overtrading ✔ Traders who struggle with fake breakouts ✔ Traders who want a clear **pre-trade checklist** ✔ Traders who prefer decision support over raw signals --- ### ⚠️ Disclaimer This indicator does **not** provide investment advice. It is intended for **educational and analytical purposes only**. Always apply your own risk management.
Pine Script®指標
由arctraded提供
1
SFP SCANNERV2============================== 📌 SFP SCANNER — QUICK GUIDE (EN) ============================== 🎯 Goal Automatically scan Swing Failure Patterns (SFPs) on pivot-based support and resistance levels, using a multi-timeframe, structural and filterable approach. 👉 This indicator is designed to be mainly used with alerts on watchlists. The more permissive the filters are, the more signals (and noise) you will get. -------------------------------------------------- 🧱 1) Pivot Levels — Pivot Timeframe -------------------------------------------------- Levels are built using classic pivots. Settings: • Pivot timeframe: timeframe used to compute pivots (e.g. 4H) • Pivot source: - Wicks = highs / lows - Closes = closing prices • Left / Right: number of bars required to validate a pivot ➡️ A pivot is confirmed only after “Right” bars. 👉 Recommendation: minimum 15 / 15 on H4. -------------------------------------------------- 🎨 Level Display -------------------------------------------------- • Pivot High → resistances • Pivot Low → supports • Colors, width and style are visual-only settings -------------------------------------------------- 📍 2) SFP Detection — Counting Timeframe -------------------------------------------------- SFPs are detected on the “Counting timeframe”, regardless of the chart timeframe. Bearish SFP (resistance): 1) Close above the level (breakout) 2) Close back below the level (reclaim) 3) Breakout duration must respect: - Min bars breakout - Max bars breakout (counted in counting timeframe bars) Bullish SFP (support): Mirrored logic: 1) Break below 2) Reclaim above 3) Min / Max bars respected -------------------------------------------------- 🧠 3) Trend Filter — Moving Averages (optional) -------------------------------------------------- If enabled: • MA50 > MA200 → only Bullish SFPs allowed • MA50 < MA200 → only Bearish SFPs allowed Settings: • MA timeframe: - Blank = counting timeframe - Recommended: pivot timeframe • MA type: SMA or EMA • Fast / Slow MA: default 50 / 200 -------------------------------------------------- 🧱 4) Structural Support / Resistance Filter -------------------------------------------------- This filter is independent from the MA filter. Structure pivots count (N): • Number of consecutive supports / resistances used to validate structure. Checkbox logic (restrictive): 👉 If no checkbox is selected → all SFPs are allowed. Bullish SFPs allowed if: • Supports are rising • Resistances are rising Bearish SFPs allowed if: • Resistances are falling • Supports are falling ➡️ Each checkbox acts as an independent restriction. At least one selected condition must be true to allow the SFP. -------------------------------------------------- 🛑 5) Anti-spam -------------------------------------------------- • One-shot per level ➡️ Once triggered, the level is considered consumed. -------------------------------------------------- 🔎 6) Levels to Scan -------------------------------------------------- • Number of recent pivot levels (supports + resistances) checked for SFP detection. -------------------------------------------------- 🕒 7) Multi-timeframe Display -------------------------------------------------- Regardless of the chart timeframe: • Chart > Counting timeframe: A lower-timeframe SFP is displayed on the higher-timeframe candle. • Chart = Counting timeframe: The SFP appears directly on the candle at close. • Chart < Counting timeframe: The signal is displayed at the opening of the next counting timeframe candle. -------------------------------------------------- 🔔 TradingView Alerts -------------------------------------------------- • Bullish SFP • Bearish SFP -------------------------------------------------- ⚙️ Suggested Settings (Day trading / 1–2 day swing) -------------------------------------------------- • Pivot timeframe: 4H • Counting timeframe: 15m (or 5m for more signals) • Levels to scan: 1 to 2 • Structure pivots count (N): 2 to 3 • Min bars breakout: 2 to 3 • Max bars breakout: 5 to 10 ✅ Happy scanning and good trades! 😄
Pine Script®指標
由RH05提供
Day Trading Signals Trend & Momentum Buy/Sell [CocoChoco]Day Trading Signals: Trend & Momentum Buy/Sell Overview The indicator is a comprehensive day-trading tool designed to identify high-probability entries by aligning short-term momentum with long-term trend confluence. It filters out low-volatility "choppy" markets using ADX and ensures you are always trading in the direction of the dominant higher-timeframe trend. Important: Use on timeframes from 15 min to 2 hours, as the indicator is for day trading only. How It Works The script uses a three-layer confirmation system: Trend Alignment: Uses a Fast/Slow SMA cross (10/50) on the current chart. Signal prints only if price closes above (for bullish) or below (for bearish) the 10-period SMA. Higher Timeframe Confluence: The script automatically looks at a higher timeframe (1H for charts <=15m, and 4H for others) and checks if the price is above/below a 200-period SMA. Momentum & Volatility: Signals are only triggered if the Stochastic Oscillator is rising/falling and the ADX is above 20, ensuring there is enough "strength" behind the move. Visual Signals Buy/Sell Green Label (Up Arrow): Bullish entry signal Red Label (Down Arrow): Bearish entry signal. Red "X": Exit signal based on a moving average crossover (trend exhaustion). Visual Risk/Reward (1:1) Boxes: When a signal appears, the script automatically draws a projection of your Stop Loss (Red) and Take Profit (Green) based on the current ATR (Average True Range). How to Use Entry: Enter when a Label appears. Ensure the candle has closed to confirm the signal. Stop Loss/Take Profit: Use the visual boxes as a guide. The default is 1.0 ATR for risk and 1.0 RR ratio, which can be adjusted in the settings. Exit: Exit the trade either at the target boxes or when the Red "X" appears, indicating the trend has shifted. Please note that this is just a tool, not financial advice. Perform your own analysis before entering a trade.
Pine Script®指標
由CocoChoco1提供
Optimist Pulse Wave [RC] Optimist Pulse Wave Optimist Pulse Wave is a closed-source oscillator that analyzes market momentum and internal price energy using a structured multi-wave and multi-filter framework. The indicator is intended to help traders assess momentum strength, phase transitions, and potential exhaustion areas across different market conditions. Data Sources and Technical Components The script is derived from price OHLC data and internally incorporates commonly known technical elements, including: Simple Moving Averages (SMA) Exponential Moving Averages (EMA) Relative Strength Index (RSI) Moving Average Convergence Divergence (MACD) and used proprietary algorithm to make price and volume data to waves These elements are not used or displayed in their standard standalone form. They are combined, transformed, and normalized to construct a layered momentum model. Conceptual Framework Market momentum develops in layers and degrees of strength. Rather than producing a single oscillator output, this indicator decomposes momentum into multiple wave types, and then evaluates each wave through progressive strength filters. Wave Types The script models momentum using five wave types, each representing a different time-response of price: 1. Pulse Wave | Short-term momentum and rapid price acceleration 2. Swing Wave | Intermediate momentum capturing swing-level movements 3. Trend Wave | Broader directional momentum reflecting trend persistence 4. Cycle Wave | Dominant rhythm of price over extended periods 5. Epoch Wave | Long-duration structural momentum used to contextualize regime changes or prolonged conditions Strength Filters Each wave type is further evaluated using five internal strength filters, representing increasing levels of momentum confirmation: Base | Minimal momentum conditions for the wave Enhanced | Improved momentum quality with reduced noise Strong | Sustained momentum with higher consistency Dominant | Momentum aligned across multiple internal measures Absolute | Extreme or fully developed momentum state These filters help distinguish weak signals from structurally strong conditions. Normalization and Zones All wave and filter outputs are normalized to a fixed 0–100 scale, allowing comparison across symbols and timeframes. The oscillator is visually divided into: Green / Lower Zone : (Low Energy / Accumulation) Weak or rebuilding momentum Middle Zone : Transitional or balanced conditions Red / Upper Zone : (High Energy / Distribution / Exhaustion)Strong momentum or potential exhaustion Zone interpretation is context-dependent. Visual Trade Signals ✔ Green markers → Pulse-based BUY zones (energy expansion from lows) ✔ Red markers → Pulse-based SELL zones (energy exhaustion from highs) Visual Markers Visual markers appear when specific wave-and-filter combinations indicate: Momentum expansion from low-strength conditions Momentum deterioration after extended strength Markers are intended as analytical references, not automated trade instructions. 🌍 Works Across All Markets & Timeframes ✔ Index (NIFTY, BANKNIFTY) ✔ Stocks ✔ Forex ✔ Crypto ✔ Scalping, Intraday to Positional Usage Guidelines This indicator may assist traders in: Evaluating trend quality and momentum health Timing entries during pullbacks Identifying momentum exhaustion Avoiding low-energy or sideways conditions It should be used in conjunction with price action and contextual analysis. Important Notes The script uses commonly known technical components in a non-standard, composite structure No predictive certainty or profitability claims are made All outputs require user interpretation and confirmation Settings and Training Videos available in followed folder drive.google.com
Pine Script®指標
由raikarcapital提供
All in One [Wonniewant]This script is the ultimate "All-in-One" trend and volatility solution designed to maximize efficiency for TradingView users, especially those with indicator slot limits. It combines **15 Moving Averages** and **4 Volatility Bands** into a single indicator, allowing you to monitor complex market trends without cluttering your indicator list. **Key Features:** 1. **Comprehensive Moving Averages (15 Lines):** - **SMA (Simple MA):** 5 lines (Defaults: 5, 20, 60, 120, 240) - **EMA (Exponential MA):** 5 lines (Defaults: 5, 20, 60, 120, 240) - **HMA (Hull MA):** 5 lines (Defaults: 5, 20, 60, 120, 240) *Each line is fully customizable.* 2. **Advanced Volatility Bands (4 Sets):** - **Bollinger Bands:** 2 independent sets with customizable Basis (SMA/EMA), Length, and Multiplier. - **Keltner Channels:** 2 independent sets with customizable ATR periods and Multipliers. 3. **Full Customization & Control:** - **Master Toggles:** Quickly hide or show entire groups (e.g., "Show SMAs Master Toggle") to keep your chart clean. - **Individual Controls:** Toggle visibility, change colors, and adjust **Line Width (1-5px)** for every single line directly from the settings. - **Source Selection:** Choose different price sources (Close, High, Low, etc.) for each group independently. **How to Use:** - Add the script to your chart. - Open "Settings" to configure periods, colors, and line widths. - Use the checkboxes to enable/disable specific indicators based on your strategy. - Perfect for traders who need a clean workspace while keeping all critical technical levels within a single tool. *Author: Wonniewant*
Pine Script®指標
由WoonieWant提供
Volumatic VIDYA Strategy [Modified by running]This strategy involves a modification of the Volumatic VIDYA indicator originally created by @BigBeluga. All credit for the underlying calculation logic goes to the original author. Original Script: Changes & Strategy Logic: I have converted the indicator into a backtestable strategy with the following additions: Trend Entry: Enters Long/Short based on VIDYA trend direction. EMA Filter: Added a customizable EMA (default 200) filter. Longs are only taken above EMA, Shorts below EMA. Delta Volume Filter: Enters only when the Delta Volume exceeds a specific absolute threshold (default 30%) to ensure momentum. Risk Management (New): Implemented a position sizing logic based on risk percentage. The strategy calculates the distance between the entry price and the VIDYA line (stop loss level) and adjusts the position size to risk a fixed % of equity (default 2%) per trade. License: This code is licensed under CC BY-NC-SA 4.0, same as the original work.
Pine Script®策略
由hamsung提供
The SHIFT - Signal Harmonic Inflection Flow Tracker🔄 THE SHIFT — SIGNAL HARMONIC INFLECTION FLOW TRACKER Precision reversal detection at the exact moment price shifts direction. 📐 CORE CONCEPT: THE INFLECTION POINT Every sustained price move begins with a single moment — the instant price crosses from one phase to another. THE SHIFT captures this exact inflection point by combining two essential confirmations: 1. The Phase Cross Price crossing the EMA ribbon midpoint represents a structural change in market bias. The ribbon midpoint is calculated as the average of EMA 21 and EMA 55, creating a dynamic equilibrium zone. When price decisively crosses this level, it signals a potential phase transition. 2. The Confirming Wick Not every ribbon cross leads to continuation. THE SHIFT filters for quality by requiring the crossing candle to show directional commitment through its wick structure: ✓ Bullish SHIFT: Lower wick ≥ 25% of bar range (buyers absorbed selling pressure) ✓ Bearish SHIFT: Upper wick ≥ 25% of bar range (sellers absorbed buying pressure) This dual confirmation eliminates weak crosses that occur during sideways chop. ⚙️ HOW IT WORKS The EMA Ribbon Five exponential moving averages (8, 13, 21, 34, 55) form an adaptive ribbon that expands during trends and contracts during consolidation. The ribbon serves multiple purposes: ✓ Visual trend identification through color gradient ✓ Dynamic support/resistance zones ✓ Phase boundary definition via ribbon midpoint Phase Detection The indicator tracks three distinct market phases: ✓ VELOCITY BULLISH — Price confirmed above ribbon midpoint ✓ VELOCITY BEARISH — Price confirmed below ribbon midpoint ✓ EQUILIBRIUM — Price oscillating around midpoint without confirmation Phase confirmation requires price to remain on one side of the ribbon for a user-defined number of bars (default: 2), preventing false signals from single-bar noise. Market Pressure Index (MPI) MPI quantifies the balance between buying and selling pressure within each bar by analyzing where price closes relative to its range, weighted by volume. This provides momentum context for phase transitions: ✓ Positive MPI confirms bullish pressure ✓ Negative MPI confirms bearish pressure ✓ Strong readings (above threshold) indicate conviction Consensus Grading System Each SHIFT signal receives a quality grade (A+, A, B, C) based on five factors: ✓ Phase Strength — EMA alignment plus MPI strength ✓ Trend Alignment — All EMAs properly stacked ✓ Volume Confirmation — Above-average participation ✓ Momentum Convergence — MPI confirms direction ✓ Structure Respect — Price at value area Higher grades indicate stronger confluence and potentially higher-probability setups. 📊 VISUAL SYSTEM SHIFT Labels ✓ ▲ SHIFT — Bullish phase flip detected ✓ ▼ SHIFT — Bearish phase flip detected Labels appear at the exact bar where the phase transition occurs. Entry Zones When a qualified SHIFT fires, a colored box appears showing: ✓ Entry zone boundaries ✓ Signal direction (LONG/SHORT) ✓ Wick percentage that triggered the signal ✓ Quality grade Dynamic Trade Management THE SHIFT tracks three profit targets (T1, T2, T3) and stop levels with intelligent visual feedback: ✓ Target Lines — Display as dashed lines during active trade ✓ Target Hit — Line turns GREEN with "✓ T1/T2/T3" label ✓ Target Fade — Hit targets progressively fade and disappear after user-defined bars ✓ Stop Hit — Line turns RED with "❌ STOPPED OUT" label This visual system keeps your chart clean while providing clear feedback on trade progress. Background Shading Subtle background color indicates current phase: ✓ Green tint — Bullish phase ✓ Red tint — Bearish phase ✓ Yellow tint — Equilibrium 🧠 SHIFT ASSISTANT — INTELLIGENT COACHING PANEL The SHIFT Assistant provides real-time contextual guidance that adapts to market conditions: MARKET READ Current market assessment: ✓ "💪 Strong bullish trend in play" ✓ "📈 Bullish momentum building" ✓ "🔥 Compression detected - breakout imminent" ✓ "⚖️ Equilibrium - wait for SHIFT" ACTION Specific guidance for current situation: ✓ "🟢 SHIFT LONG - Wick confirmed buyers" ✓ "📊 Halfway to T1 - Hold with conviction" ✓ "✅ T1 Hit - Consider partials, move stop to entry" ✓ "👀 Bullish shift but weak wick - skip" ✓ "⏸️ No setup - Patience pays" CAUTION Risk warnings when applicable: ✓ "⚠️ Bearish divergence forming - caution on new longs" ✓ "🌊 Volatility expanding - widen mental stops" INSIGHT Additional observations: ✓ "✨ Perfect bullish SHIFT setup" ✓ "📊 EMAs fully stacked - trend mature" ✓ "💎 Grade A+ conditions" TRADE STATUS When in an active trade: ✓ Current P&L percentage ✓ Bars in trade ✓ Risk buffer remaining (ATR to stop) 📋 MAIN DASHBOARD The dashboard displays comprehensive real-time information: Phase Status ✓ Current phase (Velocity Bullish/Bearish/Equilibrium) ✓ Phase strength (Strong/Moderate/Weak) ✓ MPI reading Consensus Breakdown ✓ Visual progress bar showing consensus score ✓ Individual check status for all five factors ✓ Current quality grade Wick & Shift Status ✓ Current wick type and percentage ✓ Whether a SHIFT is occurring on current bar Three Laws Display ✓ Law 1: Direction (SHIFT BULL/BEAR or No Shift) ✓ Law 2: Confirmation (Wick Confirms or Weak Wick) ✓ Law 3: Quality (Grade passes filter or not) All three laws must be satisfied for a signal to fire. ⚙️ INPUT PARAMETERS SHIFT Core Engine ✓ MPI Period (14) — Lookback for Market Pressure Index calculation ✓ MPI Sensitivity (1.5) — Amplification factor for pressure readings ✓ Phase Confirmation Bars (2) — Bars required on one side of ribbon to confirm phase ✓ Strong Momentum Threshold (0.5) — MPI level considered "strong" EMA Ribbon ✓ Show EMA Ribbon — Toggle ribbon visibility ✓ EMA Fast/2/Core/4/Slow (8/13/21/34/55) — Individual EMA periods Signal Settings ✓ Show Signals — Toggle signal generation ✓ Minimum Signal Grade (B) — Filter signals below this quality threshold ✓ Min Wick Ratio (0.25) — Minimum wick size as percentage of bar range to confirm shift ✓ Show Entry Zones/Stops/Targets — Toggle visual elements ✓ Stop Loss ATR (1.5) — Stop distance in ATR multiples ✓ Zone Width (15) — How many bars entry zones extend forward ✓ Target Fade Duration (8) — Bars before hit targets disappear Assistant & Dashboard ✓ Position and size options for both panels ✓ Independent show/hide toggles Visual ✓ Customizable colors for bullish, bearish, neutral, target hit, and stop hit ✓ Background and label transparency controls 🎯 RECOMMENDED USAGE Best Timeframes ✓ 5-minute to 1-hour for intraday trading ✓ 4-hour to Daily for swing trading ✓ Adjust Min Wick Ratio lower (0.20) on higher timeframes where wicks tend to be smaller Best Markets ✓ Liquid instruments with clear trending behavior ✓ Futures, Forex, and large-cap equities ✓ Avoid during major news events when price action becomes erratic Signal Filtering ✓ Grade A+ and A signals have highest confluence ✓ Grade B signals are acceptable with additional confirmation ✓ Grade C signals should generally be skipped ✓ Use the Assistant's ACTION guidance to understand why signals fire or don't fire Trade Management ✓ T1 at 1× risk (1:1 R) — Consider taking partials ✓ T2 at 2× risk (2:1 R) — Move stop to breakeven ✓ T3 at 3× risk (3:1 R) — Full target, close remaining position ✓ Watch for phase invalidation (opposite SHIFT) as hard stop signal 🔔 ALERTS THE SHIFT includes comprehensive alert conditions: ✓ SHIFT Long — Bullish entry signal ✓ SHIFT Short — Bearish entry signal ✓ T1/T2/T3 Hit — Target reached notifications ✓ Stopped Out — Stop level breached ✓ Shift Bullish/Bearish — Phase flip events (with or without trade signal) Dynamic alerts include grade and wick percentage information for complete context. 📝 DEVELOPMENT NOTES THE SHIFT emerged from extensive research into what makes reversal signals reliable versus unreliable. The key insight was that most failed reversals lack wick confirmation — the candle crosses a level but shows no evidence that the opposing force actually stepped in. By requiring both the structural cross (price through ribbon midpoint) AND the wick confirmation (evidence of absorption), THE SHIFT filters out the low-quality signals that plague simpler crossover systems. The intelligent Assistant panel was designed to function as a trading coach, helping traders understand not just WHEN to trade but WHY conditions are or aren't favorable. This educational component helps develop intuition over time. ⚠️ RISK DISCLAIMER This indicator is a technical analysis tool designed to identify potential trading opportunities. It does not guarantee profits and should not be used as the sole basis for trading decisions. Past performance of any trading system or methodology is not necessarily indicative of future results. Trading involves substantial risk of loss and is not suitable for all investors. Always use proper risk management, position sizing appropriate to your account, and never risk more than you can afford to lose. Paper trade any new system extensively before committing real capital. The developer makes no claims about win rates, profit factors, or expected returns. Your results will vary based on market conditions, timeframe selection, and execution. 🎯 SUMMARY THE SHIFT provides a unified approach to reversal detection: ✓ Simple Logic — Phase cross + wick confirmation = signal ✓ Quality Grading — Consensus scoring filters for best setups ✓ Visual Clarity — Dynamic trade management keeps charts clean ✓ Intelligent Coaching — Assistant explains market conditions in real-time ✓ Complete System — Entry, targets, stops, and management in one indicator One objective. One system. Catch the shift. "The market speaks in inflection points. THE SHIFT translates." Taking you to school. — Dskyz , Trade with insight. Trade with anticipation.
Pine Script®指標
由DskyzInvestments提供
1
GateKeepers - EMA Signals (v2)GateKeepers EMA v2 — Clean Trend Bias & Market Structure Framework GateKeepers EMA v2 is a clean, rule-based EMA framework designed to define trend bias and directional context without clutter, lag, or signal spam. This indicator is built for traders who understand that bias comes before entries. Instead of generating buy/sell signals, EMA v2 focuses on clearly showing when the market is bullish, bearish, or transitioning, so you can make better decisions with your existing execution model. 🔑 What GateKeepers EMA v2 Does • Dynamically colors EMAs to instantly reflect bullish vs bearish market conditions • Helps identify trend alignment, transitions, and chop • Keeps charts clean and readable for fast decision-making • Works seamlessly with price action, structure, momentum, and volatility tools 🎯 How to Use It • Use EMA v2 as your directional filter (trade with the trend, not against it) • Combine with: • Market structure (HH/HL or LL/LH) • Momentum confirmation (MACD, RSI, volume) • Session and volatility filters • Ideal for MNQ / NQ futures, intraday trading, and scalping 🚫 What This Is NOT • Not a signal-spamming indicator • Not a “holy grail” • Not meant to replace risk management or execution rules 🧠 Why It Works Professional traders don’t trade indicators—they trade context. GateKeepers EMA v2 provides that context by keeping you aligned with the dominant trend and out of low-probability conditions. If your charts feel noisy or your trades feel random, this tool helps bring structure and discipline back into your process. ⸻ Best used as part of a rules-based trading system.
Pine Script®指標
由GsWillMade提供
Algo_LongOnly_H1_SS26Strategy Overview: Hull Suite Trend Follower This H1 quantitative strategy utilizes a multi-variant Hull Moving Average (HMA) engine to capture swing momentum with minimal lag. By dynamically switching between HMA, EHMA, and THMA, the algorithm filters market noise and identifies high-probability trend shifts. Key Features Adaptive Smoothing: Leverages the Hull Suite to eliminate price lag while maintaining sensitivity to trend reversals. Directional Versatility: Configurable for Long-Only, Short-Only, or Bi-directional execution. Time-Bounded Backtesting: Integrated date-range engine for precise historical performance analysis. Visual Intelligence: Real-time trend visualization via a dynamic cloud band for immediate bias confirmation.
Pine Script®策略
由sergiosar提供
Pullback Master Pro CareCThe "Pullback Master Pro" indicator identifies strategic pullback trading opportunities by analyzing price retracements within established trends, using a multi-timeframe approach with customizable higher-timeframe filtering to ensure alignment with the dominant market direction. It detects pullback depth, momentum through RSI oversold/overbought conditions, and volume analysis (spikes and dry-ups) to confirm entries, while providing real-time visual signals and a highly configurable information table that users can position in six different screen locations (corners and mid-sides), choose from three size layouts (small, medium, large), adjust font sizes, and personalize with five color themes (dark, light, blue, green, red) for optimal chart integration and readability.
Pine Script®指標
由CareExtended提供
Multi MA-MTF + ATRMulti MA-MTF + ATR is a lightweight, flexible moving-average toolkit built for clean charting and multi-timeframe context. Key Features Up to 10 Moving Averages (SMA / EMA / RMA / WMA / VWMA / HMA) Per-MA controls: Enable/disable Type, Length, Source Color + Width MTF mode Project to LTF: display a higher-timeframe MA on lower timeframes (example: show the 1H MA directly on the 5m/15m chart) Only on that TF: show the MA only when the chart timeframe matches the selected TF Confirmed option for higher-timeframe values (helps avoid repaint-like behavior by holding the last confirmed HTF value) ATR Panel ATR value table displayed on the chart Optional ATR high/low lines (disabled by default) Defaults Only MA1–MA3 enabled by default (clean out of the box) Default MA line width set to 1 ATR lines OFF by default Important Note (If it “drifts” / appears off the price) If the indicator looks “detached” or seems to drift, it’s usually because TradingView moved it into a separate pane. Fix: click the three dots next to the indicator name → Move to → Main chart. You can also remove and re-add the indicator to reset its placement.
Pine Script®指標
由GabFX31提供