🔔 NIFTY 100+ Points Early Move Signal (1H)//@version=5
indicator("🔔 NIFTY 100+ Points Early Move Signal (1H)", overlay=true)
// === Inputs === //
squeezePeriod = input.int(20, title="Price Squeeze Lookback")
rangeTrigger = input.float(100.0, title="Target Move (in Points)")
rsiLength = input.int(14, title="RSI Length")
macdFast = input.int(12)
macdSlow = input.int(26)
macdSignal = input.int(9)
volMultiplier = input.float(1.5, title="Volume Spike Multiplier")
// === RSI & MACD === //
rsi = ta.rsi(close, rsiLength)
= ta.macd(close, macdFast, macdSlow, macdSignal)
macdBullish = macdLine > signalLine
macdBearish = macdLine < signalLine
// === Price Compression === //
hh = ta.highest(high, squeezePeriod)
ll = ta.lowest(low, squeezePeriod)
compressionRange = hh - ll
tightCompression = compressionRange < (rangeTrigger * 0.6) // Pre-expansion
// === Volume Spike === //
avgVol = ta.sma(volume, 20)
volSpike = volume > avgVol * volMultiplier
// === Early Signal Logic === //
bullSetup = tightCompression and rsi > 50 and macdBullish and volSpike
bearSetup = tightCompression and rsi < 50 and macdBearish and volSpike
// === Plotting Signals === //
plotshape(bullSetup, title="Bullish Setup", location=location.belowbar, color=color.green, style=shape.labelup, text="100↑")
plotshape(bearSetup, title="Bearish Setup", location=location.abovebar, color=color.red, style=shape.labeldown, text="100↓")
bgcolor(bullSetup ? color.new(color.green, 85) : na)
bgcolor(bearSetup ? color.new(color.red, 85) : na)
// === Alerts === //
alertcondition(bullSetup, title="Bullish 100pt Setup", message="🚀 NIFTY: 100+ point UP move likely!")
alertcondition(bearSetup, title="Bearish 100pt Setup", message="🔻 NIFTY: 100+ point DOWN move likely!")
指標和策略
3 EMA Signal with Cleaned Dual Entry Logic3-EMA Trend Following Indicator with Buy/Sell Signals
EMA1 = Slow EMA (default 100)
EMA2 = Fast EMA (default 10)
EMA3 = Medium EMA (default 20)
Trend is bullish when EMA2 and EMA3 are above EMA1
Buy when EMA2 crosses above EMA3 in bullish trend
Sell when EMA2 crosses below EMA3 in bearish trend
Entry and exit points are plotted on chart
Reversal Point Dynamics⇋ Reversal Point Dynamics (RPD)
This is not an indicator; it is a complete system for deconstructing the mechanics of a market reversal. Reversal Point Dynamics (RPD) moves far beyond simplistic pattern recognition, venturing into a deep analysis of the underlying forces that cause trends to exhaust, pause, and turn. It is engineered from the ground up to identify high-probability reversal points by quantifying the confluence of market dynamics in real-time.
Where other tools provide a static signal, RPD delivers a dynamic probability. It understands that a true market turning point is not a single event, but a cascade of failing momentum, structural breakdown, and a shift in market order. RPD's core engine meticulously analyzes each of these dynamic components—the market's underlying state, its velocity and acceleration, its degree of chaos (entropy), and its structural framework. These forces are synthesized into a single, unified Probability Score, offering you an unprecedented, transparent view into the conviction behind every potential reversal.
This is not a "black box" system. It is an open-architecture engine designed to empower the discerning trader. Featuring real-time signal projection, an integrated Fibonacci R2R Target Engine, and a comprehensive dashboard that acts as your Dynamics Control Center , RPD gives you a complete, holistic view of the market's state.
The Theoretical Core: Deconstructing Market Dynamics
RPD's analytical power is born from the intelligent synthesis of multiple, distinct theoretical models. Each pillar of the engine analyzes a different facet of market behavior. The convergence of these analyses—the "Singularity" event referenced in the dashboard—is what generates the final, high-conviction probability score.
1. Pillar One: Quantum State Analysis (QSA)
This is the foundational analysis of the market's current state within its recent context. Instead of treating price as a random walk, QSA quantizes it into a finite number of discrete "states."
Formulaic Concept: The engine establishes a price range using the highest high and lowest low over the Adaptive Analysis Period. This range is then divided into a user-defined number of Analysis Levels. The current price is mapped to one of these states (e.g., in a 9-level system, State 0 is the absolute low, and State 8 is the absolute high).
Analytical Edge: This acts as a powerful foundational filter. The engine will only begin searching for reversal signals when the market has reached a statistically stretched, extreme state (e.g., State 0 or 8). The Edge Sensitivity input allows you to control exactly how close to this extreme edge the price must be, ensuring you are trading from points of maximum potential exhaustion.
2. Pillar Two: Price State Roc (PSR) - The Dynamics of Momentum
This pillar analyzes the kinetic forces of the market: its velocity and acceleration. It understands that it’s not just where the price is, but how it got there that matters.
Formulaic Concept: The psr function calculates two derivatives of price.
Velocity: (price - price ). This measures the speed and direction of the current move.
Acceleration: (velocity - velocity ). This measures the rate of change in that speed. A negative acceleration (deceleration) during a strong rally is a critical pre-reversal warning, indicating momentum is fading even as price may be pushing higher.
Analytical Edge: The engine specifically hunts for exhaustion patterns where momentum is clearly decelerating as price reaches an extreme state. This is the mechanical signature of a weakening trend.
3. Pillar Three: Market Entropy Analysis - The Dynamics of Order & Chaos
This is RPD's chaos filter, a concept borrowed from information theory. Entropy measures the degree of randomness or disorder in the market's price action.
Formulaic Concept: The calculateEntropy function analyzes recent price changes. A market moving directionally and smoothly has low entropy (high order). A market chopping back and forth without direction has high entropy (high chaos). The value is normalized between 0 and 1.
Analytical Edge: The most reliable trades occur in low-entropy, ordered environments. RPD uses the Entropy Threshold to disqualify signals that attempt to form in chaotic, unpredictable conditions, providing a powerful shield against whipsaw markets.
4. Pillar Four: The Synthesis Engine & Probability Calculation
This is where all the dynamic forces converge. The final probability score is a weighted calculation that heavily rewards confluence.
Formulaic Concept: The calculateProbability function intelligently assembles the final score:
A Base Score is established from trend strength and entropy.
An Entropy Score adds points for low entropy (order) and subtracts for high entropy (chaos).
A significant Divergence Bonus is awarded for a classic momentum divergence.
RSI & Volume Bonuses are added if momentum oscillators are in extreme territory or a volume spike confirms institutional interest.
MTF & Adaptive Bonuses add further weight for alignment with higher timeframe structure.
Analytical Edge: A signal backed by multiple dynamic forces (e.g., extreme state + decelerating momentum + low entropy + volume spike) will receive an exponentially higher probability score. This is the very essence of analyzing reversal point dynamics.
The Command Center: Mastering the Inputs
Every input is a precise lever of control, allowing you to fine-tune the RPD engine to your exact trading style, market, and timeframe.
🧠 Core Algorithm
Predictive Mode (Early Detection):
What It Is: Enables the engine to search for potential reversals on the current, unclosed bar.
How It Works: Analyzes intra-bar acceleration and state to identify developing exhaustion. These signals are marked with a ' ? ' and are tentative.
How To Use It: Enable for scalping or very aggressive day trading to get the earliest possible indication. Disable for swing trading or a more conservative approach that waits for full bar confirmation.
Live Signal Mode (Current Bar):
What It Is: A highly aggressive mode that plots tentative signals with a ' ! ' on the live bar based on projected price and momentum. These signals repaint intra-bar.
How It Works: Uses a linear regression projection of the close to anticipate a reversal.
How To Use It: For advanced users who use intra-bar dynamics for execution and understand the nature of repainting signals.
Adaptive Analysis Period:
What It Is: The main lookback period for the QSA, PSR, and Entropy calculations. This is the engine's "memory."
How It Works: A shorter period makes the engine highly sensitive to local price swings. A longer period makes it focus only on major, significant market structure.
How To Use It: Scalping (1-5m): 15-25. Day Trading (15m-1H): 25-40. Swing Trading (4H+): 40-60.
Fractal Strength (Bars):
What It Is: Defines the strength of the pivot detection used for confirming reversal events.
How It Works: A value of '2' requires a candle's high/low to be more extreme than the two bars to its left and right.
How To Use It: '2' is a robust standard. Increase to '3' for an even stricter definition of a structural pivot, which will result in fewer signals.
MTF Multiplier:
What It Is: Integrates pivot data from a higher timeframe for confluence.
How It Works: A multiplier of '4' on a 15-minute chart will pull pivot data from the 1-hour chart (15 * 4 = 60m).
How To Use It: Set to a multiple that corresponds to your preferred higher timeframe for contextual analysis.
🎯 Signal Settings
Min Probability %:
What It Is: Your master quality filter. A signal is only plotted if its score exceeds this threshold.
How It Works: Directly filters the output of the final probability calculation.
How To Use It: High-Quality (80-95): For A+ setups only. Balanced (65-75): For day trading. Aggressive (50-60): For scalping.
Min Signal Distance (Bars):
What It Is: A noise filter that prevents signals from clustering in choppy conditions.
How It Works: Enforces a "cooldown" period of N bars after a signal.
How To Use It: Increase in ranging markets to focus on major swings. Decrease on lower timeframes.
Entropy Threshold:
What It Is: Your "chaos shield." Sets the maximum allowable market randomness for a signal.
How It Works: If calculated entropy is above this value, the signal is invalidated.
How To Use It: Lower values (0.1-0.5): Extremely strict. Higher values (0.7-1.0): More lenient. 0.85 is a good balance.
Adaptive Entropy & Aggressive Mode:
What It Is: Toggles for dynamically adjusting the engine's core parameters.
How It Works: Adaptive Entropy can slightly lower the required probability in strong trends. Aggressive Mode uses more lenient settings across the board.
How To Use It: Keep Adaptive on. Use Aggressive Mode sparingly, primarily for scalping highly volatile assets.
📊 State Analysis
Analysis Levels:
What It Is: The number of discrete "states" for the QSA.
How It Works: More levels create a finer-grained analysis of price location.
How To Use It: 6-7 levels are ideal. Increasing to 9 can provide more precision on very volatile assets.
Edge Sensitivity:
What It Is: Defines how close to the absolute top/bottom of the range price must be.
How It Works: '0' means price must be in the absolute highest/lowest state. '3' allows a signal within the top/bottom 3 states.
How To Use It: '3' provides a good balance. Lower it to '1' or '0' if you only want to trade extreme exhaustion.
The Dashboard: Your Dynamics Control Center
The dashboard provides a transparent, real-time view into the engine's brain. Use it to understand the context behind every signal and to gauge the current market environment at a glance.
🎯 UNIFIED PROB SCORE
TOTAL SCORE: The highest probability score (either Peak or Valley) the engine is currently calculating. This is your main at-a-glance conviction metric. The "Singularity" header refers to the event where market dynamics align—the event RPD is built to detect.
Quality: A human-readable interpretation of the Total Score. "EXCEPTIONAL" (🌟) is a rare, A+ confluence event. "STRONG" (💪) is a high-quality, tradable setup.
📊 ORDER FLOW & COMPONENT ANALYSIS
Volume Spike: Shows if the current volume is significantly higher than average (YES/NO). A 'YES' adds major confirmation.
Peak/Valley Conf: This breaks down the probability score into its directional components, showing you the separate confidence levels for a potential top (Peak) versus a bottom (Valley).
🌌 MARKET STRUCTURE
HTF Trend: Shows the direction of the underlying trend based on a Supertrend calculation.
Entropy: The current market chaos reading. "🔥 LOW" is an ideal, ordered state for trading. "😴 HIGH" is a warning of choppy, unpredictable conditions.
🔮 FIB & R2R ZONE (Large Dashboard)
This section gives you the status of the Fibonacci Target Engine. It shows if an Active Channel (entry zone) or Stop Zone (invalidation zone) is active and displays the precise price levels for the static entry, target, and stop calculated at the time of the signal.
🛡️ FILTERS & PREDICTIVES (Large Dashboard)
This panel provides a status check on all the bonus filters. It shows the current RSI Status, whether a Divergence is present, and if a Live Pending signal is forming.
The Visual Interface: A Symphony of Data
Every visual element is designed for instant, intuitive interpretation of market dynamics.
Signal Markers: These are the primary outputs of the engine.
▼/▲ b: A fully confirmed signal that has passed all filters.
? b: A tentative signal generated in Predictive Mode, indicating developing dynamics.
◈ b: This diamond icon replaces the standard triangle when the signal is confirmed by a strong momentum divergence, highlighting it as a superior setup where dynamics are misaligned with price.
Harmonic Wave: The flowing, colored wave around the price.
What It Represents: The market's "flow dynamic" and volatility.
How to Interpret It: Expanding waves show increasing volatility. The color is tied to the "Quantum Color" in your theme, representing the underlying energy field of the market.
Entropy Particles: The small dots appearing above/below price.
What They Represent: A direct visualization of the "order dynamic."
How to Interpret Them: Their presence signifies a low-entropy, ordered state ideal for trading. Their color indicates the direction of momentum (PSR velocity). Their absence means the market is too chaotic (high entropy).
The Fibonacci Target Engine: The dynamic R2R system appearing post-signal.
Static Fib Levels: Colored horizontal lines representing the market's "structural dynamic."
The Green "Active Channel" Box: Your zone of consideration. An area to manage a potential entry.
Development Philosophy
Reversal Point Dynamics was engineered to answer a fundamental question: can we objectively measure the forces behind a market turn? It is a synthesis of concepts from market microstructure, statistics, and information theory. The objective was never to create a "perfect" system, but to build a robust decision-support tool that provides a measurable, statistical edge by focusing on the principle of confluence.
By demanding that multiple, independent market dynamics align simultaneously, RPD filters out the vast majority of market noise. It is designed for the trader who thinks in terms of probability and risk management, not in terms of certainties. It is a tool to help you discount the obvious and bet on the unexpected alignment of market forces.
"Markets are constantly in a state of uncertainty and flux and money is made by discounting the obvious and betting on the unexpected."
— George Soros
Trade with insight. Trade with anticipation.
— Dskyz, for DAFE Trading Systems
Vortex Indicator with HistogramThis is a simple script showing a standard Vortex Indicator along with a histogram that displays the difference between the Vortex lines.
ICT TOOLS//@version=5
indicator("ICT TOOLS", overlay=true, max_lines_count=500, max_labels_count=5, max_boxes_count=500)
// General Settings Inputs
TZI = input.string (defval="UTC -4", title="Timezone Selection", options= , tooltip="Select the Timezone. ( Shifts Chart Elements )", group="Global Settings")
Timezone = TZI == "UTC -10" ? "GMT-10:00" : TZI == "UTC -7" ? "GMT-07:00" : TZI == "UTC -6" ? "GMT-06:00" : TZI == "UTC -5" ? "GMT-05:00" : TZI == "UTC -4" ? "GMT-04:00" : TZI == "UTC -3" ? "GMT-03:00" : TZI == "UTC +0" ? "GMT+00:00" : TZI == "UTC +1" ? "GMT+01:00" : TZI == "UTC +2" ? "GMT+02:00" : TZI == "UTC +3" ? "GMT+03:00" : TZI == "UTC +3:30" ? "GMT+03:30" : TZI == "UTC +4" ? "GMT+04:00" : TZI == "UTC +5" ? "GMT+05:00" : TZI == "UTC +5:30" ? "GMT+05:30" : TZI == "UTC +6" ? "GMT+06:00" : TZI == "UTC +7" ? "GMT+07:00" : TZI == "UTC +8" ? "GMT+08:00" : TZI == "UTC +9" ? "GMT+09:00" : TZI == "UTC +9:30" ? "GMT+09:30" : TZI == "UTC +10" ? "GMT+10:00" : TZI == "UTC +10:30" ? "GMT+10:30" : TZI == "UTC +11" ? "GMT+11:00" : TZI == "UTC +13" ? "GMT+13:00" : "GMT+13:45"
inputMaxInterval = input.int (31, title="Hide Indicator Above Specified Minutes", tooltip="Above 30Min, Chart Will Become Messy & Unreadable", group="Global Settings")
// Session options
ShowTSO = input.bool (true, title="Show Today's Session Only", group="Session Options", tooltip="Hide Historical Sessions")
ShowTWO = input.bool (true, title="Show Current Week's Sessions Only", group="Session Options", tooltip="Show All Sessions from the current week")
SL4W = input.bool (true, title="Show Last 4 Week Sessions", group="Session Options", tooltip="Show All Sessions from Last Four Weeks Should Disable Current Week Session to Work")
ShowSFill = input.bool (false, title="Show Session Highlighting", group="Session Options", tooltip="Highlights Session from Top of the Chart to Bottom")
//----------------------------------------------
// Historical Lines
ShowMOPL = input.bool (title="Midnight Historical Price Lines", defval=false, group="Historical Lines", tooltip="Shows Historical Midnight Price Lines")
MOLHist = input.bool (title="Midnight Historical Vertical Lines", defval=true, group="Historical Lines", tooltip="Shows Historical Midnight Vertical Lines")
ShowPrev = input.bool (false, title="Misc. Historical Price Lines", group="Historical Lines", tooltip="Makes Chart Cluttered, Use For Backtesting Only")
//----------------------------------------------
// Session Bool
ShowLondon = input.bool (false, "", inline="LONDON", group="Sessions", tooltip="01:00 to 05:00")
ShowNY = input.bool (false, "", inline="NY", group="Sessions", tooltip="07:00 to 10:00")
ShowLC = input.bool (false, "", inline="LC", group="Sessions", tooltip="10:00 to 12:00")
ShowPM = input.bool (false, "",inline="PM", group="Sessions", tooltip="13:00 to 16:00")
ShowAsian = input.bool (false, "",inline="ASIA2", group="Sessions", tooltip="20:00 to 00:00")
ShowFreeSesh = input.bool (false, "",inline="FREE", group="Sessions", tooltip="Custom Session")
// Session Strings
txt2 = input.string ("LONDON", title="", inline="LONDON", group="Sessions")
txt3 = input.string ("NEW YORK", title="", inline="NY", group="Sessions")
txt4 = input.string ("LDN CLOSE", title="", inline="LC", group="Sessions")
txt5 = input.string ("AFTERNOON", title="", inline="PM", group="Sessions")
txt6 = input.string ("ASIA", title="", inline="ASIA2", group="Sessions")
txt9 = input.string ("FREE SESH", title="", inline="FREE", group="Sessions")
// CBDR = input.session ('1400-2000:1234567', "", inline="CBDR", group="Sessions")
// ASIA = input.session ('2000-0000:1234567', "", inline="ASIA", group="Sessions")
// Session Times
LDNsesh = input.session ('0200-0500:1234567', "", inline="LONDON", group="Sessions")
NYsesh = input.session ('0700-1000:1234567', "", inline="NY", group="Sessions")
LCsesh = input.session ('1000-1200:1234567', "", inline="LC", group="Sessions")
PMsesh = input.session ('1300-1600:1234567', "", inline="PM", group="Sessions")
ASIA2sesh = input.session ('2000-2359:1234567', "", inline="ASIA2", group="Sessions")
FreeSesh = input.session ('0000-0000:1234567', "", inline="FREE", group="Sessions")
// Session Color
LSFC = input.color (color.new(#787b86, 90), "", inline="LONDON", group="Sessions")
NYSFC = input.color (color.new(#787b86, 90), "",inline="NY", group="Sessions")
LCSFC = input.color (color.new(#787b86, 90), "",inline="LC", group="Sessions")
PMSFC = input.color (color.new(#787b86, 90), "",inline="PM", group="Sessions")
ASFC = input.color (color.new(#787b86, 90), "",inline="ASIA2", group="Sessions")
FSFC = input.color (color.new(#787b86, 90), "",inline="FREE", group="Sessions")
//----------------------------------------------
// Vertical Line Bool
ShowMOP = input.bool (title="", defval=true, inline="MOP", group="Vertical Lines", tooltip="00:00 AM")
txt12 = input.string ("MIDNIGHT", title="", inline="MOP", group="Vertical Lines")
ShowLOP = input.bool (title="", defval=false, inline="LOP", group="Vertical Lines", tooltip="03:00 AM")
txt14 = input.string ("LONDON", title="", inline="LOP", group="Vertical Lines")
ShowNYOP = input.bool (title="", defval=true, inline="NYOP", group="Vertical Lines", tooltip="08:30 AM")
txt15 = input.string ("NEW YORK", title="", inline="NYOP", group="Vertical Lines")
ShowEOP = input.bool (title="", defval=false, inline="EOP", group="Vertical Lines", tooltip="09:30 AM")
txt16 = input.string ("EQUITIES", title="", inline="EOP", group="Vertical Lines")
// Vertical Line Color
MOPColor = input.color (color.new(#787b86, 0), "", inline="MOP", group="Vertical Lines")
LOPColor = input.color (color.rgb(0,128,128,60), "", inline="LOP", group="Vertical Lines")
NYOPColor = input.color (color.rgb(0,128,128,60), "", inline="NYOP", group="Vertical Lines")
EOPColor = input.color (color.rgb(0,128,128,60), "", inline="EOP", group="Vertical Lines")
// Vertical LineStyle
Midnight_Open_LS = input.string ("Dotted", "", options= , inline="MOP", group="Vertical Lines")
london_Open_LS = input.string ("Solid", "", options= , inline="LOP", group="Vertical Lines")
NY_Open_LS = input.string ("Solid", "", options= , inline="NYOP", group="Vertical Lines")
Equities_Open_LS = input.string ("Solid", "", options= , inline="EOP", group="Vertical Lines")
// Vertical LineWidth
Midnight_Open_LW = input.string ("1px", "", options= , inline="MOP", group="Vertical Lines")
London_Open_LW = input.string ("1px", "", options= , inline="LOP", group="Vertical Lines")
NY_Open_LW = input.string ("1px", "", options= , inline="NYOP", group="Vertical Lines")
Equities_Open_LW = input.string ("1px", "", options= , inline="EOP", group="Vertical Lines")
//----------------------------------------------
// Opening Price Bool
ShowMOPP = input.bool (title="", defval=true, inline="MOPP", group="Opening Price Lines", tooltip="00:00 AM")
txt13 = input.string ("MIDNIGHT", title="", inline="MOPP", group="Opening Price Lines")
ShowNYOPP = input.bool (title="", defval=false, inline="NYOPP", group="Opening Price Lines", tooltip="08:30 AM")
txt17 = input.string ("NEW YORK", title="", inline="NYOPP", group="Opening Price Lines")
ShowEOPP = input.bool (title="", defval=false, inline="EOPP", group="Opening Price Lines", tooltip="09:30 AM")
txt18 = input.string ("EQUITIES", title="", inline="EOPP", group="Opening Price Lines")
ShowAFTPP = input.bool (title="", defval=false, inline="AFTOPP", group="Opening Price Lines", tooltip="01:30 PM")
txt1330 = input.string ("AFTERNOON", title="", inline="AFTOPP", group="Opening Price Lines")
// Opening Price Color
MOPColP = input.color (color.new(#787b86, 0), "", inline="MOPP", group="Opening Price Lines")
NYOPColP = input.color (color.new(#787b86, 0), "", inline="NYOPP", group="Opening Price Lines")
EOPColP = input.color (color.new(#787b86, 0), "", inline="EOPP", group="Opening Price Lines")
AFTOPColP = input.color (color.new(#787b86, 0), "", inline="AFTOPP", group="Opening Price Lines")
// Opening Price LineStyle
MOPLS = input.string ("Dotted", "", options= , inline="MOPP", group="Opening Price Lines")
NYOPLS = input.string ("Dotted", "", options= , inline="NYOPP", group="Opening Price Lines")
EOPLS = input.string ("Dotted", "", options= , inline="EOPP", group="Opening Price Lines")
AFTOPLS = input.string ("Dotted", "", options= , inline="AFTOPP", group="Opening Price Lines")
// Opening Price LineWidth
i_MOPLW = input.string ("1px", "", options= , inline="MOPP", group="Opening Price Lines")
i_NYOPLW = input.string ("1px", "", options= , inline="NYOPP", group="Opening Price Lines")
i_EOPLW = input.string ("1px", "", options= , inline="EOPP", group="Opening Price Lines")
i_AFTOPLW = input.string ("1px", "", options= , inline="AFTOPP", group="Opening Price Lines")
//----------------------------------------------
// W&M Bool
ShowWeekOpen = input.bool (defval=false, title="", tooltip="Draw Weekly Open Price Line", group="HTF Opening Price Lines", inline="WO")
showMonthOpen = input.bool (defval=false, title="", tooltip="Draw Monthly Open Price Line", group="HTF Opening Price Lines", inline="MO")
// W&M String
txt19 = input.string ("WEEKLY", title="", inline="WO", group="HTF Opening Price Lines")
txt20 = input.string ("MONTHLY", title="", inline="MO", group="HTF Opening Price Lines")
// W&M Color
i_WeekOpenCol = input.color (title="", defval=color.new(#787b86, 0), group="HTF Opening Price Lines", inline="WO")
i_MonthOpenCol = input.color (title="", tooltip="", defval=color.new(#787b86, 0), group="HTF Opening Price Lines", inline="MO")
// W&M LineStyle
WOLS = input.string ("Dotted", "", options= , inline="WO", group="HTF Opening Price Lines")
MOLS = input.string ("Dotted", "", options= , inline="MO", group="HTF Opening Price Lines")
// W&M LineWidth
i_WOPLW = input.string ("1px", "", options= , inline="WO", group="HTF Opening Price Lines")
i_MONPLW = input.string ("1px", "", options= , inline="MO", group="HTF Opening Price Lines")
//----------------------------------------------
// CBDR, ASIA & FLOUT
ShowCBDR = input.bool (true, "", inline='CBDR', group="CBDR, ASIA & FLOUT")
ShowASIA = input.bool (true, "", inline='ASIA', group="CBDR, ASIA & FLOUT")
ShowFLOUT = input.bool (false, "", inline='FLOUT', group="CBDR, ASIA & FLOUT")
// Strings
txt0 = input.string ("CBDR", title="", inline="CBDR", group="CBDR, ASIA & FLOUT", tooltip="16:00 to 20:00 SD Increments of 1")
txt1 = input.string ("ASIA", title="", inline="ASIA", group="CBDR, ASIA & FLOUT", tooltip="20:00 to 00:00 SD Increments of 1")
txt7 = input.string ("FLOUT", title="", inline="FLOUT", group="CBDR, ASIA & FLOUT", tooltip="16:00 to 00:00 SD Increments of 0.5")
// Color
CBDRBoxCol = input.color (color.new(#787b86, 0),"", inline='CBDR', group="CBDR, ASIA & FLOUT")
ASIABoxCol = input.color (color.new(#787b86, 0), "", inline='ASIA', group="CBDR, ASIA & FLOUT")
FLOUTBoxCol = input.color (color.new(#787b86, 0),"", inline='FLOUT', group="CBDR, ASIA & FLOUT")
// Extras
box_text_cbdr = input.bool (true, "Show Text", inline="CBDR", group="CBDR, ASIA & FLOUT")
box_text_cbdr_col = input.color (color.new(color.gray, 80), "", inline="CBDR", group="CBDR, ASIA & FLOUT")
bool_cbdr_dev = input.bool (true, "SD", inline="CBDR", group="CBDR, ASIA & FLOUT")
box_text_asia = input.bool (true, "Show Text", inline="ASIA", group="CBDR, ASIA & FLOUT")
box_text_asia_col = input.color (color.new(color.gray, 80), "", inline="ASIA", group="CBDR, ASIA & FLOUT")
bool_asia_dev = input.bool (true, "SD", inline="ASIA", group="CBDR, ASIA & FLOUT")
box_text_flout = input.bool (true, "Show Text", inline="FLOUT", group="CBDR, ASIA & FLOUT")
box_text_flout_col = input.color (color.new(color.gray, 80), "", inline="FLOUT", group="CBDR, ASIA & FLOUT")
bool_flout_dev = input.bool (true, "SD", inline="FLOUT", group="CBDR, ASIA & FLOUT")
// Table
// SD Lines
ShowDevLN = input.bool (title="", defval=true, inline="DEVLN", group="Standard Deviation", tooltip="Deviation Lines")
DEVLNTXT = input.string ("SD LINES", title="", inline="DEVLN", group="Standard Deviation")
DevLNCol = input.color (color.new(#787b86, 0), "", inline="DEVLN", group="Standard Deviation")
DEVLS = input.string ("Solid", "", options= , inline="DEVLN", group="Standard Deviation")
i_DEVLW = input.string ("1px", "", options= , inline="DEVLN", group="Standard Deviation")
DEVLSS = DEVLS=="Solid" ? line.style_solid : DEVLS == "Dotted" ? line.style_dotted : line.style_dashed
DEVLW = i_DEVLW=="1px" ? 1 : i_DEVLW == "2px" ? 2 : i_DEVLW == "3px" ? 3 : i_DEVLW == "4px" ? 4 : 5
ShowDev = input.bool (false, '', inline="DEV", group="Standard Deviation")
txt8 = input.string ("SD COUNT", title="", inline="DEV", group="Standard Deviation")
SDCountCol = input.color (color.new(#787b86, 0), "", inline="DEV", group="Standard Deviation")
DevInput = input.string ("2 SD", "", options= , inline="DEV", group="Standard Deviation")
DevDirection = input.string ("Both", "", options= , inline="DEV", group="Standard Deviation", tooltip="SD Count, NULL, SD Count, SD Direction")
DevCount = DevInput == "1 SD" ? 1 : DevInput == "2 SD" ? 2 : DevInput == "3 SD" ? 3 : 4
Auto_Select = input.bool (false, "", group="Standard Deviation", inline="AUTOSD", tooltip="Auto SD Selection | Charter Content, Range Table Might Bug Out On Mondays" )
txtSD = input.string ("AUTO SD", "", group="Standard Deviation", inline="AUTOSD")
Tab1txtCol = input.color (color.new(#808080, 0), "", inline='AUTOSD', group="Standard Deviation")
TabOptionShow = input.string ("Show Table", "", options= , inline="AUTOSD", group="Standard Deviation")
Stats = TabOptionShow == "Show Table" ? true : false
TabOption1 = input.string ("Top Right", "", options= , inline="AUTOSD", group="Standard Deviation")
tabinp1 = TabOption1 == "Top Left" ? position.top_left : TabOption1 == "Top Center" ? position.top_center : TabOption1 == "Top Right" ? position.top_right : TabOption1 == "Middle Left" ? position.middle_left : TabOption1 == "Middle Right" ? position.middle_right : TabOption1 == "Bottom Left" ? position.bottom_left : TabOption1 == "Bottom Center" ? position.bottom_center : position.bottom_right
L_Prof = true
CellBG = color.new(#131722, 100)
//----------------------------------------------
// Day Of Week & Labels
// Label Settings Inputs
ShowLabel = input.bool (true, title="", inline="Glabel", group="Day Of Week & Labels")
txt21 = input.string ("LABEL", title="", inline="Glabel", group="Day Of Week & Labels")
LabelColor = input.color (color.rgb(0,0,0,100), "", inline="Glabel", group="Day Of Week & Labels")
LabelSizeInput = input.string ("Normal", "", options= , inline="Glabel", group="Day Of Week & Labels")
Terminusinp = input.string ("Terminus @ Current Time +1hr", "", options = , inline="Glabel", group="Day Of Week & Labels", tooltip="Select Label Size & Color & Terminus Historical Price Lines needs to be toggled off for using Terminus")
ShowLabelText = input.bool (true, title="", inline="label", group="Day Of Week & Labels")
txt22 = input.string ("LABEL TEXT", title="", inline="label", group="Day Of Week & Labels")
LabelTextColor = input.color (color.new(#787b86, 0), title="", inline="label", group="Day Of Week & Labels")
LabelTextOptioninput = input.string ("Time", "", options= , inline="label", group="Day Of Week & Labels", tooltip="Choose Between Descriptive Text as Label or Time Show/Hide Prices on Labels")
ShowPricesBool = input.string ("Hide Prices", title="", options= , group="Day Of Week & Labels", inline="label")
ShowPrices = ShowPricesBool == "Show Prices" ? true : false
showDOW = input.bool (true, title="", inline="DOW", group="Day Of Week & Labels")
txt24 = input.string ("DAY OF WEEK", title="", inline="DOW", group="Day Of Week & Labels")
i_DOWCol = input.color (color.new(#787b86, 0), title="", inline="DOW", group="Day Of Week & Labels")
DOWTime = input.int (defval = 12, title="", inline="DOW", group="Day Of Week & Labels")
DOWLoc_inpt = input.string ("Bottom", "", options = , inline="DOW", group="Day Of Week & Labels", tooltip="DOW Color, Time Alignment, Vertical Location")
DOWLoc = DOWLoc_inpt == "Bottom" ? location.bottom : location.top
//----------------------------------------------
BIAS_M_Bool = input.bool (false, "", group="BIAS & NOTES PRECONFIG", inline="stats")
txt100 = input.string ("BIAS", title="", inline="stats", group="BIAS & NOTES PRECONFIG")
TableBG2 = color.new(#131722, 100)
Tab2txtCol = input.color (color.new(#787b86, 0), "", inline='stats', group="BIAS & NOTES PRECONFIG")
TabOption2 = input.string ("Bottom Right", "", options= , inline="stats", group="BIAS & NOTES PRECONFIG")
tabinp2 = TabOption2 == "Top Left" ? position.top_left : TabOption2 == "Top Center" ? position.top_center : TabOption2 == "Top Right" ? position.top_right : TabOption2 == "Middle Left" ? position.middle_left : TabOption2 == "Middle Right" ? position.middle_right : TabOption2 == "Bottom Left" ? position.bottom_left : TabOption2 == "Bottom Center" ? position.bottom_center : position.bottom_right
notesbool = false
NOTES_M_Bool = input.bool (true, "", group="BIAS & NOTES PRECONFIG", inline="stats2")
txt101 = input.string ("NOTES", title="", inline="stats2", group="BIAS & NOTES PRECONFIG")
Tab3txtCol = input.color (color.new(#787b86, 0), "", inline='stats2', group="BIAS & NOTES PRECONFIG")
TabOption3 = input.string ("Top Center", "", options= , inline="stats2", group="BIAS & NOTES PRECONFIG")
tabinp3 = TabOption3 == "Top Left" ? position.top_left : TabOption3 == "Top Center" ? position.top_center : TabOption3 == "Top Right" ? position.top_right : TabOption3 == "Middle Left" ? position.middle_left : TabOption3 == "Middle Right" ? position.middle_right : TabOption3 == "Bottom Left" ? position.bottom_left : TabOption3 == "Bottom Center" ? position.bottom_center : position.bottom_right
BIASbool1 = input.bool (true, '', inline="BIAS1", group="BIAS & NOTES")
txt52 = input.string ("DXY ", title="", inline="BIAS1", group="BIAS & NOTES")
BIASOption1 = input.string ("Unclear", options= , title="", inline="BIAS1", group="BIAS & NOTES")
BIASbool2 = input.bool (true, '', inline="BIAS2", group="BIAS & NOTES")
txt53 = input.string ("SPX ", title="", inline="BIAS2", group="BIAS & NOTES")
BIASOption2 = input.string ("Unclear", options= , title="", inline="BIAS2", group="BIAS & NOTES")
BIASbool3 = input.bool (true, '', inline="BIAS3", group="BIAS & NOTES")
txt54 = input.string ("DOW ", title="", inline="BIAS3", group="BIAS & NOTES")
BIASOption3 = input.string ("Unclear", options= , title="", inline="BIAS3", group="BIAS & NOTES")
BIASbool4 = input.bool (true, '', inline="BIAS4", group="BIAS & NOTES")
txt55 = input.string ("NAS ", title="", inline="BIAS4", group="BIAS & NOTES")
BIASOption4 = input.string ("Unclear", options= , title="", inline="BIAS4", group="BIAS & NOTES")
notes = input.text_area ("@smc_trading_br", "Notes", group = "BIAS & NOTES")
//--------------------END OF INPUTS--------------------//
// Pre-Def
DOM = (timeframe.multiplier <= inputMaxInterval) and (timeframe.isintraday)
newDay = ta.change(dayofweek)
newWeek = ta.change(weekofyear)
newMonth = ta.change(time("M"))
transparentcol = color.rgb(255,255,255,100)
LSVLC = color.rgb(255,255,255,100)
NYSVLC = color.rgb(255,255,255,100)
PMSVLC = color.rgb(255,255,255,100)
ASVLC = color.rgb(255,255,255,100)
LSVLS = "dotted"
NYSVLS = "dotted"
PMSVLS = "dotted"
ASVLS = "dotted"
// Functions
isToday = false
if year(timenow) == year(time) and month(timenow) == month(time) and dayofmonth(timenow) == dayofmonth(time)
isToday := true
// Current Week
thisweek = year(timenow) == year(time) and weekofyear(timenow) == weekofyear(time)
LastOneWeek = year(timenow) == year(time) and weekofyear(timenow-604800000) == weekofyear(time)
LastTwoWeek = year(timenow) == year(time) and weekofyear(timenow-1209600000) == weekofyear(time)
LastThreeWeek = year(timenow) == year(time) and weekofyear(timenow-1814400000) == weekofyear(time)
LastFourWeek = year(timenow) == year(time) and weekofyear(timenow-2419200000) == weekofyear(time)
Last4Weeks = false
if thisweek == true or LastOneWeek == true or LastTwoWeek == true or LastThreeWeek == true or LastFourWeek == true
Last4Weeks := true
// Function to draw Vertical Lines
vline(Start, Color, linestyle, LineWidth) =>
line.new(x1=Start, y1=low - ta.tr, x2=Start, y2=high + ta.tr, xloc=xloc.bar_time, extend=extend.both, color=Color, style=linestyle, width=LineWidth)
// Function to convert forex pips into whole numbers
atr = ta.atr(14)
toWhole(number) =>
if syminfo.type == "forex" // This method only works on forex pairs
_return = atr < 1.0 ? (number / syminfo.mintick) / 10 : number
_return := atr >= 1.0 and atr < 100.0 and syminfo.currency == "JPY" ? _return * 100 : _return
else
number
// Function for determining the Start of a Session (taken from the Pinescript manual: www.tradingview.com )
SessionBegins(sess) =>
t = time("", sess , Timezone)
DOM and (not barstate.isfirst) and na(t ) and not na(t)
// BarIn Session
BarInSession(sess) =>
time(timeframe.period, sess, Timezone) != 0
// Label Type Logic
var SFistrue = true
if LabelTextOptioninput == "Time"
SFistrue := true
else
SFistrue := false
// Session String to int
SeshStartHour(Session) =>
math.round(str.tonumber(str.substring(Session,0,2)))
SeshStartMins(Session) =>
math.round(str.tonumber(str.substring(Session,2,4)))
SeshEndHour(Session) =>
math.round(str.tonumber(str.substring(Session,5,7)))
SeshEndMins(Session) =>
math.round(str.tonumber(str.substring(Session,7,9)))
// Time periods
CBDR = "1600-2000:1234567"
ASIA = "2000-0000:1234567"
FLOUT = "1600-0000:1234567"
midsesh = "0000-1600:1234567"
cbdrOpenTime = timestamp (Timezone, year, month, dayofmonth, SeshStartHour(CBDR), SeshStartMins(CBDR), 00)
cbdrEndTime = timestamp (Timezone, year, month, dayofmonth, SeshEndHour(CBDR), SeshEndMins(CBDR), 00)
asiaOpenTime = timestamp (Timezone, year, month, dayofmonth, SeshStartHour(ASIA), SeshStartMins(ASIA), 00)
asiaEndTime = timestamp (Timezone, year, month, dayofmonth, SeshEndHour(ASIA), SeshEndMins(ASIA), 00)+86400000
floutOpenTime = timestamp (Timezone, year, month, dayofmonth, SeshStartHour(FLOUT), SeshStartMins(FLOUT), 00)
floutEndTime = timestamp (Timezone, year, month, dayofmonth, SeshEndHour(FLOUT), SeshEndMins(FLOUT), 00)+86400000
CBDRTime = time (timeframe.period, CBDR, Timezone)
ASIATime = time (timeframe.period, ASIA, Timezone)
FLOUTTime = time (timeframe.period, FLOUT, Timezone)
LabelOnlyToday = true
// Time Periods
LondonStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(LDNsesh), SeshStartMins(LDNsesh), 00)
LondonEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(LDNsesh), SeshEndMins(LDNsesh), 00)
NYStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(NYsesh), SeshStartMins(NYsesh), 00)
NYEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(NYsesh), SeshEndMins(NYsesh), 00)
LCStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(LCsesh), SeshStartMins(LCsesh), 00)
LCEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(LCsesh), SeshEndMins(LCsesh), 00)
PMStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(PMsesh), SeshStartMins(PMsesh), 00)
PMEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(PMsesh), SeshEndMins(PMsesh), 00)
AsianStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(ASIA2sesh), SeshStartMins(ASIA2sesh), 00)
AsianEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(ASIA2sesh), SeshEndMins(ASIA2sesh), 00)
FreeStartTime = timestamp(Timezone, year, month, dayofmonth, SeshStartHour(FreeSesh), SeshStartMins(FreeSesh), 00)
FreeEndTime = timestamp(Timezone, year, month, dayofmonth, SeshEndHour(FreeSesh), SeshEndMins(FreeSesh), 00)
MidnightOpenTime = timestamp(Timezone, year, month, dayofmonth, 0, 0, 00)
CLEANUPTIME = timestamp(Timezone, year, month, dayofmonth, 0, 0, 00) - 16200000
LondonOpenTime = timestamp(Timezone, year, month, dayofmonth, 3, 0, 00)
NYOpenTime = timestamp(Timezone, year, month, dayofmonth, 8, 30, 00)
EquitiesOpenTime = timestamp(Timezone, year, month, dayofmonth, 9, 30, 00)
AfternoonOpenTime = timestamp(Timezone, year, month, dayofmonth, 13, 30, 00)
tMidnight = time("1", "0000-0001:1234567", Timezone)
// Cleanup - Remove old drawing objects
Cleanup(days) =>
// Delete old drawing objects
// One day is 86400000 milliseconds
removal_timestamp = (CLEANUPTIME) - (days * 86400000) // Remove every drawing object older than the start of the Today's Midnight
a_allLines = line.all
a_allLabels = label.all
a_allboxes = box.all
// Remove old lines
if array.size(a_allLines) > 0
for i = 0 to array.size(a_allLines) - 1
line_x2 = line.get_x2(array.get(a_allLines, i))
if line_x2 < (removal_timestamp)
line.delete(array.get(a_allLines, i))
// Remove old labels
if array.size(a_allLabels) > 0
for i = 0 to array.size(a_allLabels) - 1
label_x = label.get_x(array.get(a_allLabels, i))
if label_x < removal_timestamp
label.delete(array.get(a_allLabels, i))
// Remove old boxes
if array.size(a_allboxes) > 0
for i = 0 to array.size(a_allboxes) - 1
box_x = box.get_right(array.get(a_allboxes, i))
if box_x < (removal_timestamp - 86400000)
box.delete(array.get(a_allboxes, i))
// End of Cleanup function
// Terminus Function
Terminus(Terminus_Inp)=>
if Terminus_Inp == "Terminus @ Current Time"
_return = timenow
else if Terminus_Inp == "Terminus @ Current Time +15min"
_return = timenow + 900000
else if Terminus_Inp == "Terminus @ Current Time +30min"
_return = timenow + 1800000
else if Terminus_Inp == "Terminus @ Current Time +45min"
_return = timenow + 2700000
else if Terminus_Inp == "Terminus @ Current Time +1hr"
_return = timenow + 3600000
else if Terminus_Inp == "Terminus @ Current Time +2hr"
_return = timenow + 7200000
else
_return = timenow + 10800000
// Linestyle Function
MNOPLS = Midnight_Open_LS=="Solid" ? line.style_solid : Midnight_Open_LS == "Dotted" ? line.style_dotted : line.style_dashed
LNOPLS = london_Open_LS=="Solid" ? line.style_solid : london_Open_LS == "Dotted" ? line.style_dotted : line.style_dashed
NWYOPLS = NY_Open_LS=="Solid" ? line.style_solid : NY_Open_LS == "Dotted" ? line.style_dotted : line.style_dashed
EQOPLS = Equities_Open_LS=="Solid" ? line.style_solid : Equities_Open_LS == "Dotted" ? line.style_dotted : line.style_dashed
MOPLSS = MOPLS=="Solid" ? line.style_solid : MOPLS == "Dotted" ? line.style_dotted : line.style_dashed
NYOPLSS = NYOPLS=="Solid" ? line.style_solid : NYOPLS == "Dotted" ? line.style_dotted : line.style_dashed
EOPLSS = EOPLS=="Solid" ? line.style_solid : EOPLS == "Dotted" ? line.style_dotted : line.style_dashed
AFTOPLSS = AFTOPLS=="Solid" ? line.style_solid : AFTOPLS == "Dotted" ? line.style_dotted : line.style_dashed
WeekOpenLS = WOLS=="Solid" ? line.style_solid : WOLS == "Dotted" ? line.style_dotted : line.style_dashed
MonthOpenLS = MOLS=="Solid" ? line.style_solid : MOLS == "Dotted" ? line.style_dotted : line.style_dashed
// Linewidth Function
MOPLW = Midnight_Open_LW=="1px" ? 1 : Midnight_Open_LW == "2px" ? 2 : Midnight_Open_LW == "3px" ? 3 : Midnight_Open_LW == "4px" ? 4 : 5
LOPLW = London_Open_LW=="1px" ? 1 : London_Open_LW == "2px" ? 2 : London_Open_LW == "3px" ? 3 : London_Open_LW == "4px" ? 4 : 5
NYOPLW = NY_Open_LW=="1px" ? 1 : NY_Open_LW == "2px" ? 2 : NY_Open_LW == "3px" ? 3 : NY_Open_LW == "4px" ? 4 : 5
EOPLW = Equities_Open_LW=="1px" ? 1 : Equities_Open_LW == "2px" ? 2 : Equities_Open_LW == "3px" ? 3 : Equities_Open_LW == "4px" ? 4 : 5
MOPPLW = i_MOPLW=="1px" ? 1 : i_MOPLW == "2px" ? 2 : i_MOPLW == "3px" ? 3 : i_MOPLW == "4px" ? 4 : 5
NYOPPLW = i_NYOPLW=="1px" ? 1 : i_NYOPLW == "2px" ? 2 : i_NYOPLW == "3px" ? 3 : i_NYOPLW == "4px" ? 4 : 5
EOPPLW = i_EOPLW=="1px" ? 1 : i_EOPLW == "2px" ? 2 : i_EOPLW == "3px" ? 3 : i_EOPLW == "4px" ? 4 : 5
AFTOPLW = i_AFTOPLW=="1px" ? 1 : i_AFTOPLW == "2px" ? 2 : i_AFTOPLW == "3px" ? 3 : i_AFTOPLW == "4px" ? 4 : 5
WEEKOPPLW = i_WOPLW=="1px" ? 1 : i_WOPLW == "2px" ? 2 : i_WOPLW == "3px" ? 3 : i_WOPLW == "4px" ? 4 : 5
MONTHOPPLW = i_MONPLW=="1px" ? 1 : i_MONPLW == "2px" ? 2 : i_MONPLW == "3px" ? 3 : i_MONPLW == "4px" ? 4 : 5
// Label Size Function
LabelSize =LabelSizeInput=="Auto" ? size.auto : LabelSizeInput=="Tiny" ? size.tiny : LabelSizeInput=="Small" ? size.small : LabelSizeInput=="Normal" ? size.normal : LabelSizeInput=="Large" ? size.large : size.huge
// Creating Variables
var London_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=LSVLC, width=1)
var London_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=LSVLC, width=1)
var LondonFill = linefill.new(London_Start_Vline, London_End_Vline, LSFC)
var NY_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYSVLC, width=1)
var NY_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYSVLC, width=1)
var NYFill = linefill.new(NY_Start_Vline, NY_End_Vline, NYSFC)
var LC_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYSVLC, width=1)
var LC_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYSVLC, width=1)
var LCFill = linefill.new(LC_Start_Vline, LC_End_Vline, LCSFC)
var PM_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=PMSVLC, width=1)
var PM_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=PMSVLC, width=1)
var PMFill = linefill.new(PM_Start_Vline, PM_End_Vline, PMSFC)
var Asian_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=ASVLC, width=1)
var Asian_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=ASVLC, width=1)
var AsianFill = linefill.new(Asian_Start_Vline, Asian_End_Vline, ASFC)
var Free_Start_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=ASVLC, width=1)
var Free_End_Vline = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=ASVLC, width=1)
var FreeFill = linefill.new(Free_Start_Vline, Free_End_Vline, FSFC)
var Midnight_Open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=MOPColor, width=1)
var London_Open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=LOPColor, width=1)
var NY_Open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=NYOPColor, width=1)
var Equities_Open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=EOPColor, width=1)
// When a New Day Starts, Start Drawing all lines
if newDay and dayofweek != dayofweek.sunday
// London Session
if (ShowLondon and DOM)
if ShowTSO
line.delete(London_Start_Vline )
line.delete(London_End_Vline )
linefill.delete(LondonFill )
London_Start_Vline := vline(LondonStartTime,transparentcol, line.style_solid, 1)
London_End_Vline := vline(LondonEndTime, transparentcol, line.style_solid, 1)
if ShowSFill
LondonFill := linefill.new(London_Start_Vline, London_End_Vline, LSFC)
// New York Session
if (ShowNY and DOM)
if ShowTSO
line.delete(NY_Start_Vline )
line.delete(NY_End_Vline )
linefill.delete(NYFill )
NY_Start_Vline := vline(NYStartTime, transparentcol, line.style_solid, 1)
NY_End_Vline := vline(NYEndTime, transparentcol, line.style_solid, 1)
if ShowSFill
NYFill := linefill.new(NY_Start_Vline, NY_End_Vline, NYSFC)
// London Close
if (ShowLC and DOM)
if ShowTSO
line.delete(LC_End_Vline )
linefill.delete(LCFill )
LC_Start_Vline := vline(LCStartTime, transparentcol, line.style_solid, 1)
LC_End_Vline := vline(LCEndTime, transparentcol, line.style_solid, 1)
if ShowSFill
LCFill := linefill.new(LC_Start_Vline, LC_End_Vline, LCSFC)
// PM Session
if (ShowPM and DOM)
if ShowTSO
line.delete(PM_Start_Vline )
line.delete(PM_End_Vline )
linefill.delete(PMFill )
PM_Start_Vline := vline(PMStartTime, transparentcol, line.style_solid, 1)
PM_End_Vline := vline(PMEndTime, transparentcol, line.style_solid, 1)
if ShowSFill
PMFill := linefill.new(PM_Start_Vline, PM_End_Vline, PMSFC)
// Asian Session
if (ShowAsian and DOM)
if ShowTSO
line.delete(Asian_Start_Vline )
line.delete(Asian_End_Vline )
linefill.delete(AsianFill )
Asian_Start_Vline := vline(AsianStartTime, transparentcol, line.style_solid, 1)
Asian_End_Vline := vline(AsianEndTime, transparentcol, line.style_solid, 1)
// if dayofweek == dayofweek.friday
// // line.delete(Asian_Start_Vline)
// // line.delete(Asian_End_Vline)
// Asian_Start_Vline := vline(MidnightOpenTime+244800000, transparentcol, line.style_solid, 1)
// Asian_End_Vline := vline(MidnightOpenTime+259200000, transparentcol, line.style_solid, 1)
if ShowSFill
AsianFill := linefill.new(Asian_Start_Vline, Asian_End_Vline, ASFC)
// Free Session
if (ShowFreeSesh and DOM)
if ShowTSO
line.delete(Free_Start_Vline )
line.delete(Free_End_Vline )
linefill.delete(FreeFill )
Free_Start_Vline := vline(FreeStartTime, transparentcol, line.style_solid, 1)
Free_End_Vline := vline(FreeEndTime, transparentcol, line.style_solid, 1)
if ShowSFill
FreeFill := linefill.new(Free_Start_Vline, Free_End_Vline, FSFC)
// Midnight Opening Price
if (ShowMOP and DOM)
if MOLHist == false
line.delete(Midnight_Open )
Midnight_Open := vline(MidnightOpenTime, MOPColor, MNOPLS, MOPLW)
// London Opening Price
if (ShowLOP and DOM)
if ShowTSO
line.delete(London_Open )
London_Open := vline(LondonOpenTime, LOPColor, LNOPLS, LOPLW)
// New York Opening Price
if (ShowNYOP and DOM)
if ShowTSO
line.delete(NY_Open )
NY_Open := vline(NYOpenTime, NYOPColor, NWYOPLS, NYOPLW)
// Equities Opening Price
if (ShowEOP and DOM)
if ShowTSO
line.delete(Equities_Open )
Equities_Open := vline(EquitiesOpenTime, EOPColor, EQOPLS, EOPLW)
// Variables
var label MOPLB = na
var line MOPLN = na
var label NYOPLB = na
var line NYOPLN = na
var label EOPLB = na
var line EOPLN = na
var line AFTLN = na
var label AFTLB = na
// New York Midnight Open Price line
var openMidnight = 0.0
if tMidnight
if not tMidnight
openMidnight := open
else
openMidnight := math.max(open, openMidnight)
if (ShowMOPP and (openMidnight != openMidnight ) and DOM and barstate.isconfirmed)
label.delete(MOPLB )
if ShowMOPL == false
line.delete(MOPLN )
MOPLN := line.new(x1=tMidnight, y1=openMidnight, x2=tMidnight+86400000, xloc=xloc.bar_time, y2=openMidnight, color=MOPColP, style=MOPLSS, width=MOPPLW)
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
line.set_x2(MOPLN, tMidnight+259200000)
if ShowLabel
MOPLB := label.new(x=tMidnight+86400000, y=openMidnight, xloc=xloc.bar_time, color=LabelColor, textcolor=MOPColP, style=label.style_label_left, size=LabelSize, tooltip="Midnight Opening Price")
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
label.set_x(MOPLB, tMidnight+259200000)
if ShowLabelText
if SFistrue
if ShowPrices == true
label.set_text(MOPLB, " 00:00 | " + str.tostring(open))
else
label.set_text(MOPLB, " 00:00 ")
label.set_tooltip(MOPLB, "Midnight Opening Price")
else
if ShowPrices == true
label.set_text(MOPLB, " Midnight Opening Price | " + str.tostring(open))
else
label.set_text(MOPLB, " Midnight Opening Price ")
label.set_tooltip(MOPLB, "")
label.set_textcolor(MOPLB, LabelTextColor)
label.set_size(MOPLB,LabelSize)
if time > PMEndTime and time < (MidnightOpenTime + 86400000)
line.delete(MOPLN )
if Terminusinp != "Terminus @ Next Midnight" and ShowMOPL == false
line.set_x2(MOPLN, Terminus(Terminusinp))
label.set_x(MOPLB, Terminus(Terminusinp))
// New York Opening Price Line
if (ShowNYOPP and (time == NYOpenTime) and DOM)
label.delete(NYOPLB )
if ShowPrev == false
line.delete(NYOPLN )
NYOPLN := line.new(x1=NYOpenTime, y1=open, x2=NYOpenTime+55800000, xloc=xloc.bar_time, y2=open, color=NYOPColP, style=NYOPLSS, width=NYOPPLW)
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
line.set_x2(NYOPLN, NYOpenTime+228600000)
if ShowLabel
NYOPLB := label.new(x=NYOpenTime+55800000, y=open, xloc=xloc.bar_time, color=LabelColor, textcolor=NYOPColP, style=label.style_label_left, size=LabelSize, tooltip="New York Opening Price")
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
label.set_x(NYOPLB, NYOpenTime+228600000)
if ShowLabelText
if SFistrue
if ShowPrices == true
label.set_text(NYOPLB, " 08:30 | " + str.tostring(open))
else
label.set_text(NYOPLB, " 08:30 ")
label.set_tooltip(NYOPLB, "New York Opening Price")
else
if ShowPrices == true
label.set_text(NYOPLB, " New York Opening Price | " + str.tostring(open))
else
label.set_text(NYOPLB, " New York Opening Price ")
label.set_tooltip(NYOPLB, "")
label.set_textcolor(NYOPLB, LabelTextColor)
label.set_size(NYOPLB,LabelSize)
if Terminusinp != "Terminus @ Next Midnight" and ShowPrev == false
line.set_x2(NYOPLN, Terminus(Terminusinp))
label.set_x(NYOPLB, Terminus(Terminusinp))
// Equities Opening Price Line
if (ShowEOPP and (time == EquitiesOpenTime) and DOM)
label.delete(EOPLB )
if ShowPrev == false
line.delete(EOPLN )
EOPLN := line.new(x1=EquitiesOpenTime, y1=open, x2=EquitiesOpenTime+52200000, xloc=xloc.bar_time, y2=open, color=EOPColP, style=EOPLSS, width=EOPPLW)
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
line.set_x2(EOPLN, EquitiesOpenTime+225000000)
if ShowLabel
EOPLB := label.new(x=EquitiesOpenTime+52200000, y=open, xloc=xloc.bar_time, color=LabelColor, textcolor=EOPColP, style=label.style_label_left, size=LabelSize, tooltip="Equities Opening Price")
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
label.set_x(EOPLB, EquitiesOpenTime+225000000)
if ShowLabelText
if SFistrue
if ShowPrices == true
label.set_text(EOPLB, " 09:30 | " + str.tostring(open))
else
label.set_text(EOPLB, " 09:30 ")
label.set_tooltip(EOPLB, "Equities Opening Price")
else
if ShowPrices == true
label.set_text(EOPLB, " Equities Opening Price | " + str.tostring(open))
else
label.set_text(EOPLB, " Equities Opening Price ")
label.set_tooltip(EOPLB, "")
label.set_textcolor(EOPLB, LabelTextColor)
label.set_size(EOPLB,LabelSize)
if Terminusinp != "Terminus @ Next Midnight" and ShowPrev == false
line.set_x2(EOPLN, Terminus(Terminusinp))
label.set_x(EOPLB, Terminus(Terminusinp))
// Afternoon Opening Price Line
if (ShowAFTPP and (time == AfternoonOpenTime) and DOM)
label.delete(AFTLB )
if ShowPrev == false
line.delete(AFTLN )
AFTLN := line.new(x1=AfternoonOpenTime, y1=open, x2=EquitiesOpenTime+52200000, xloc=xloc.bar_time, y2=open, color=AFTOPColP, style=AFTOPLSS, width=AFTOPLW)
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
line.set_x2(AFTLN, EquitiesOpenTime+225000000)
if ShowLabel
AFTLB := label.new(x=EquitiesOpenTime+52200000, y=open, xloc=xloc.bar_time, color=LabelColor, textcolor=AFTOPColP, style=label.style_label_left, size=LabelSize, tooltip="Equities Opening Price")
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
label.set_x(AFTLB, EquitiesOpenTime+225000000)
if ShowLabelText
if SFistrue
if ShowPrices == true
label.set_text(AFTLB, " 01:30 | " + str.tostring(open))
else
label.set_text(AFTLB, " 01:30 ")
label.set_tooltip(AFTLB, " Afternoon Opening Price")
else
if ShowPrices == true
label.set_text(AFTLB, " Afternoon Opening Price | " + str.tostring(open))
else
label.set_text(AFTLB, " Afternoon Opening Price ")
label.set_tooltip(AFTLB, "")
label.set_textcolor(AFTLB, LabelTextColor)
label.set_size(AFTLB,LabelSize)
if Terminusinp != "Terminus @ Next Midnight" and ShowPrev == false
line.set_x2(AFTLN, Terminus(Terminusinp))
label.set_x(AFTLB, Terminus(Terminusinp))
// HTF Variables
var Weekly_open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=i_WeekOpenCol, style=WeekOpenLS, width=1)
var Weekly_openlbl = label.new(x=na, y=na, xloc=xloc.bar_time, color=LabelColor, textcolor=LabelTextColor, style=label.style_label_left, size=LabelSize)
var WeeklyOpenTime = time
var Monthly_open = line.new(x1=na, y1=na, x2=na, xloc=xloc.bar_time, y2=close, color=i_MonthOpenCol, style=MonthOpenLS, width=1)
var Monthly_openlbl = label.new(x=na, y=na, xloc=xloc.bar_time, color=LabelColor, textcolor=LabelTextColor, style=label.style_label_left, size=LabelSize)
var MonthlyOpenTime = time
// Get HTF Price levels
WeeklyOpen = request.security(syminfo.tickerid, "W", open, lookahead = barmerge.lookahead_on)
MonthlyOpen = request.security(syminfo.tickerid, "M", open, lookahead = barmerge.lookahead_on)
// Weekly Open
if newWeek
WeeklyOpenTime := time
if ShowWeekOpen and newDay and Last4Weeks
label.delete(Weekly_openlbl )
line.delete(Weekly_open )
// if ShowPrev == false
// line.delete(Weekly_open )
Weekly_open:= line.new(x1=WeeklyOpenTime-25200000, y1=WeeklyOpen, x2=EquitiesOpenTime+52200000, xloc=xloc.bar_time, y2=WeeklyOpen, color=i_WeekOpenCol, style=WeekOpenLS, width=WEEKOPPLW)
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
line.set_x2(Weekly_open, EquitiesOpenTime+225000000)
if ShowLabel
Weekly_openlbl := label.new(x=EquitiesOpenTime+52200000, y=WeeklyOpen, xloc=xloc.bar_time, color=LabelColor, textcolor=LabelTextColor, style=label.style_label_left, size=LabelSize, tooltip="Weekly Open: " + str.tostring(WeeklyOpen))
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
label.set_x(Weekly_openlbl, EquitiesOpenTime+225000000)
if ShowLabelText
if SFistrue
if ShowPrices == true
label.set_text(Weekly_openlbl," W.O. | " + str.tostring(WeeklyOpen))
else
label.set_text(Weekly_openlbl," W.O. ")
label.set_tooltip(Weekly_openlbl, " Weekly Opening Price ")
else
if ShowPrices == true
label.set_text(Weekly_openlbl," Weekly Open | " + str.tostring(WeeklyOpen))
else
label.set_text(Weekly_openlbl," Weekly Open ")
label.set_tooltip(Weekly_openlbl, "")
label.set_textcolor(Weekly_openlbl, LabelTextColor)
label.set_size(Weekly_openlbl, LabelSize)
if timeframe.multiplier > 60
line.set_x2(Weekly_open, AsianEndTime + 232000000)
label.set_x(Weekly_openlbl, AsianEndTime + 232000000)
if timeframe.period == "D"
line.set_x2(Weekly_open, AsianEndTime + 832000000)
label.set_x(Weekly_openlbl, AsianEndTime + 832000000)
if timeframe.period == "M"
line.delete(Weekly_open)
label.delete(Weekly_openlbl)
if Terminusinp != "Terminus @ Next Midnight" and DOM
line.set_x2(Weekly_open, Terminus(Terminusinp))
label.set_x(Weekly_openlbl, Terminus(Terminusinp))
// Monthly Open
if newMonth
MonthlyOpenTime := time
if showMonthOpen and newDay
line.delete(Monthly_open )
label.delete(Monthly_openlbl )
Monthly_open:= line.new(x1=MonthlyOpenTime, y1=MonthlyOpen, x2=AsianEndTime, xloc=xloc.bar_time, y2=MonthlyOpen, color=i_MonthOpenCol, style=MonthOpenLS, width=MONTHOPPLW)
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
line.set_x2(Monthly_open, EquitiesOpenTime+225000000)
if ShowLabel
Monthly_openlbl := label.new(x=AsianEndTime, y=MonthlyOpen, xloc=xloc.bar_time, color=LabelColor, textcolor=LabelTextColor, style=label.style_label_left, size=LabelSize, tooltip="Monthly Open: " + str.tostring(MonthlyOpen))
if dayofweek == dayofweek.friday and syminfo.type != "crypto"
label.set_x(Monthly_openlbl, EquitiesOpenTime+225000000)
if ShowLabelText
if SFistrue
if ShowPrices == true
label.set_text(Monthly_openlbl," M.O. | " + str.tostring(MonthlyOpen))
else
label.set_text(Monthly_openlbl," M.O. ")
label.set_tooltip(Monthly_openlbl, " Monthly Opening Price ")
else
if ShowPrices == true
label.set_text(Monthly_openlbl, " Monthly Open | " + str.tostring(MonthlyOpen))
else
label.set_text(Monthly_openlbl, " Monthly Open ")
label.set_tooltip(Monthly_openlbl, "")
label.set_textcolor(Monthly_openlbl, LabelTextColor)
label.set_size(Monthly_openlbl, LabelSize)
if timeframe.multiplier > 60
line.set_x2(Monthly_open, AsianEndTime + 232000000)
label.set_x(Monthly_openlbl, AsianEndTime + 232000000)
if timeframe.period == "D"
line.set_x2(Monthly_open, AsianEndTime + 832000000)
label.set_x(Monthly_openlbl, AsianEndTime + 832000000)
if timeframe.period == "W"
line.set_x2(Monthly_open, AsianEndTime + 2592000000)
label.set_x(Monthly_openlbl, AsianEndTime + 2592000000)
if timeframe.period == "M"
line.delete(Monthly_open)
label.delete(Monthly_openlbl)
if Terminusinp != "Terminus @ Next Midnight" and DOM
line.set_x2(Monthly_open, Terminus(Terminusinp))
label.set_x(Monthly_openlbl, Terminus(Terminusinp))
// CBDR Stuff
var float cbdr_hi = na
var float cbdr_lo = na
var float cbdr_diff = na
var box cbdrbox = na
var line cbdr_hi_line = na
var line cbdr_lo_line = na
var line dev01negline = na
var line dev02negline = na
var line dev03negline = na
var line dev04negline = na
var line dev01posline = na
var line dev02posline = na
var line dev03posline = na
var line dev04posline = na
if SessionBegins(CBDR) and DOM
cbdr_hi := high
cbdr_lo := low
cbdr_diff := cbdr_hi - cbdr_lo
if ShowTSO
box.delete(cbdrbox )
line.delete(dev01posline )
line.delete(dev01negline )
line.delete(dev02posline )
line.delete(dev02negline )
line.delete(dev03posline )
line.delete(dev03negline )
line.delete(dev04posline )
line.delete(dev04negline )
if ShowCBDR
cbdrbox := box.new(cbdrOpenTime, cbdr_hi, cbdrEndTime, cbdr_lo, color.new(CBDRBoxCol,90), 1, line.style_solid, extend.none, xloc.bar_time, color.new(CBDRBoxCol,90), txt0, size.auto, color.new(box_text_cbdr_col,80), text_wrap=text.wrap_auto)
if dayofweek == dayofweek.friday
box.set_right(cbdrbox, cbdrOpenTime+187200000)
line.set_x2(cbdr_hi_line, cbdrOpenTime+187200000)
line.set_x2(cbdr_lo_line, cbdrOpenTime+187200000)
if box_text_cbdr == false
box.set_text(cbdrbox, "")
if ShowDev and ShowCBDR and bool_cbdr_dev
for i = 1 to DevCount by 1
if i == 1
dev01posline := line.new(cbdrOpenTime, cbdr_hi + cbdr_diff * i, cbdrEndTime, cbdr_hi + cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev01negline := line.new(cbdrOpenTime, cbdr_hi - cbdr_diff * i, cbdrEndTime, cbdr_lo - cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if dayofweek == dayofweek.friday
line.set_x2(dev01posline, cbdrOpenTime+187200000)
line.set_x2(dev01negline, cbdrOpenTime+187200000)
if i == 2
dev02posline := line.new(cbdrOpenTime, cbdr_hi + cbdr_diff * i, cbdrEndTime, cbdr_lo + cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev02negline := line.new(cbdrOpenTime, cbdr_hi - cbdr_diff * i, cbdrEndTime, cbdr_lo - cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if dayofweek == dayofweek.friday
line.set_x2(dev02posline, cbdrOpenTime+187200000)
line.set_x2(dev02negline, cbdrOpenTime+187200000)
if i == 3
dev03posline := line.new(cbdrOpenTime, cbdr_hi + cbdr_diff * i, cbdrEndTime, cbdr_lo + cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev03negline := line.new(cbdrOpenTime, cbdr_hi - cbdr_diff * i, cbdrEndTime, cbdr_lo - cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if dayofweek == dayofweek.friday
line.set_x2(dev03posline, cbdrOpenTime+187200000)
line.set_x2(dev03negline, cbdrOpenTime+187200000)
if i == 4
dev04posline := line.new(cbdrOpenTime, cbdr_hi + cbdr_diff * i, cbdrEndTime, cbdr_lo + cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev04negline := line.new(cbdrOpenTime, cbdr_hi - cbdr_diff * i, cbdrEndTime, cbdr_lo - cbdr_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if dayofweek == dayofweek.friday
line.set_x2(dev04posline, cbdrOpenTime+187200000)
line.set_x2(dev04negline, cbdrOpenTime+187200000)
else if CBDRTime
cbdr_hi := math.max(high, cbdr_hi)
cbdr_lo := math.min(low, cbdr_lo)
cbdr_diff := cbdr_hi - cbdr_lo
for i = 1 to DevCount by 1
if i == 1 and ShowDev
line.set_y1(dev01posline, cbdr_hi + cbdr_diff * i)
line.set_y2(dev01posline, cbdr_hi + cbdr_diff * i)
line.set_y1(dev01negline, cbdr_lo - cbdr_diff * i)
line.set_y2(dev01negline, cbdr_lo - cbdr_diff * i)
if i == 2 and ShowDev
line.set_y1(dev02posline, cbdr_hi + cbdr_diff * i)
line.set_y2(dev02posline, cbdr_hi + cbdr_diff * i)
line.set_y1(dev02negline, cbdr_lo - cbdr_diff * i)
line.set_y2(dev02negline, cbdr_lo - cbdr_diff * i)
if i == 3 and ShowDev
line.set_y1(dev03posline, cbdr_hi + cbdr_diff * i)
line.set_y2(dev03posline, cbdr_hi + cbdr_diff * i)
line.set_y1(dev03negline, cbdr_lo - cbdr_diff * i)
line.set_y2(dev03negline, cbdr_lo - cbdr_diff * i)
if i == 4 and ShowDev
line.set_y1(dev04posline, cbdr_hi + cbdr_diff * i)
line.set_y2(dev04posline, cbdr_hi + cbdr_diff * i)
line.set_y1(dev04negline, cbdr_lo - cbdr_diff * i)
line.set_y2(dev04negline, cbdr_lo - cbdr_diff * i)
if (cbdr_hi > cbdr_hi )
if ShowCBDR
box.set_top(cbdrbox, cbdr_hi)
if (cbdr_lo < cbdr_lo )
if ShowCBDR
box.set_bottom(cbdrbox, cbdr_lo)
if DevDirection == "Upside Only"
line.delete(dev01negline)
line.delete(dev02negline)
line.delete(dev03negline)
line.delete(dev04negline)
else if DevDirection == "Downside Only"
line.delete(dev01posline)
line.delete(dev02posline)
line.delete(dev03posline)
line.delete(dev04posline)
// ASIA Stuff
var float asia_hi = na
var float asia_lo = na
var float asia_diff = na
var box asia_box = na
var line asia_hi_line = na
var line asia_lo_line = na
var line dev01negline_asia = na
var line dev02negline_asia = na
var line dev03negline_asia = na
var line dev04negline_asia = na
var line dev01posline_asia = na
var line dev02posline_asia = na
var line dev03posline_asia = na
var line dev04posline_asia = na
if SessionBegins(ASIA) and DOM
asia_hi := high
asia_lo := low
asia_diff := asia_hi - asia_lo
if ShowTSO
box.delete(asia_box )
line.delete(dev01posline_asia )
line.delete(dev01negline_asia )
line.delete(dev02posline_asia )
line.delete(dev02negline_asia )
line.delete(dev03posline_asia )
line.delete(dev03negline_asia )
line.delete(dev04posline_asia )
line.delete(dev04negline_asia )
if ShowASIA
asia_box := box.new(asiaOpenTime, asia_hi, asiaEndTime, asia_lo, color.new(ASIABoxCol,90), 1, line.style_solid, extend.none, xloc.bar_time, color.new(ASIABoxCol,90), txt1, size.auto, color.new(box_text_asia_col,80), text_wrap=text.wrap_auto)
if box_text_asia == false
box.set_text(asia_box, "")
if ShowDev and ShowASIA and bool_asia_dev
for i = 1 to DevCount by 1
if i == 1
dev01posline_asia := line.new(asiaOpenTime, asia_hi + asia_diff * i, asiaEndTime, asia_hi + asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev01negline_asia := line.new(asiaOpenTime, asia_hi - asia_diff * i, asiaEndTime, asia_lo - asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if i == 2
dev02posline_asia := line.new(asiaOpenTime, asia_hi + asia_diff * i, asiaEndTime, asia_lo + asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev02negline_asia := line.new(asiaOpenTime, asia_hi - asia_diff * i, asiaEndTime, asia_lo - asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if i == 3
dev03posline_asia := line.new(asiaOpenTime, asia_hi + asia_diff * i, asiaEndTime, asia_lo + asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev03negline_asia := line.new(asiaOpenTime, asia_hi - asia_diff * i, asiaEndTime, asia_lo - asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if i == 4
dev04posline_asia := line.new(asiaOpenTime, asia_hi + asia_diff * i, asiaEndTime, asia_lo + asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev04negline_asia := line.new(asiaOpenTime, asia_hi - asia_diff * i, asiaEndTime, asia_lo - asia_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
else if ASIATime
asia_hi := math.max(high, asia_hi)
asia_lo := math.min(low, asia_lo)
asia_diff := asia_hi - asia_lo
for i = 1 to DevCount by 1
if i == 1 and ShowDev
line.set_y1(dev01posline_asia, asia_hi + asia_diff * i)
line.set_y2(dev01posline_asia, asia_hi + asia_diff * i)
line.set_y1(dev01negline_asia, asia_lo - asia_diff * i)
line.set_y2(dev01negline_asia, asia_lo - asia_diff * i)
if i == 2 and ShowDev
line.set_y1(dev02posline_asia, asia_hi + asia_diff * i)
line.set_y2(dev02posline_asia, asia_hi + asia_diff * i)
line.set_y1(dev02negline_asia, asia_lo - asia_diff * i)
line.set_y2(dev02negline_asia, asia_lo - asia_diff * i)
if i == 3 and ShowDev
line.set_y1(dev03posline_asia, asia_hi + asia_diff * i)
line.set_y2(dev03posline_asia, asia_hi + asia_diff * i)
line.set_y1(dev03negline_asia, asia_lo - asia_diff * i)
line.set_y2(dev03negline_asia, asia_lo - asia_diff * i)
if i == 4 and ShowDev
line.set_y1(dev04posline_asia, asia_hi + asia_diff * i)
line.set_y2(dev04posline_asia, asia_hi + asia_diff * i)
line.set_y1(dev04negline_asia, asia_lo - asia_diff * i)
line.set_y2(dev04negline_asia, asia_lo - asia_diff * i)
if (asia_hi > asia_hi )
box.set_top(asia_box, asia_hi)
if (asia_lo < asia_lo )
box.set_bottom(asia_box, asia_lo)
if DevDirection == "Upside Only"
line.delete(dev01negline_asia)
line.delete(dev02negline_asia)
line.delete(dev03negline_asia)
line.delete(dev04negline_asia)
else if DevDirection == "Downside Only"
line.delete(dev01posline_asia)
line.delete(dev02posline_asia)
line.delete(dev03posline_asia)
line.delete(dev04posline_asia)
// FLOUT Stuff
var float flout_hi = na
var float flout_lo = na
var float flout_diff = na
var box floutbox = na
var line flout_hi_line = na
var line flout_lo_line = na
var line dev01negline_flout = na
var line dev02negline_flout = na
var line dev03negline_flout = na
var line dev04negline_flout = na
var line dev01posline_flout = na
var line dev02posline_flout = na
var line dev03posline_flout = na
var line dev04posline_flout = na
if SessionBegins(FLOUT) and DOM
flout_hi := high
flout_lo := low
flout_diff := flout_hi - flout_lo
if ShowTSO
box.delete(floutbox )
line.delete(dev01posline_flout )
line.delete(dev01negline_flout )
line.delete(dev02posline_flout )
line.delete(dev02negline_flout )
line.delete(dev03posline_flout )
line.delete(dev03negline_flout )
line.delete(dev04posline_flout )
line.delete(dev04negline_flout )
if ShowFLOUT
floutbox := box.new(floutOpenTime, flout_hi, floutEndTime, flout_lo, color.new(FLOUTBoxCol,90), 1, line.style_solid, extend.none, xloc.bar_time, color.new(FLOUTBoxCol,90), txt7, size.auto, color.new(box_text_flout_col,80), text_wrap=text.wrap_auto)
if dayofweek == dayofweek.friday
box.set_right(floutbox, floutOpenTime+201600000)
line.set_x2(flout_hi_line, floutOpenTime+201600000)
line.set_x2(flout_lo_line, floutOpenTime+201600000)
if box_text_cbdr == false
box.set_text(floutbox, "")
if ShowDev and ShowFLOUT and bool_flout_dev
for i = 0.5 to DevCount by 0.5
if i == 0.5
dev01posline_flout := line.new(floutOpenTime, flout_hi + flout_diff * i, floutEndTime, flout_hi + flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev01negline_flout := line.new(floutOpenTime, flout_hi - flout_diff * i, floutEndTime, flout_lo - flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if dayofweek == dayofweek.friday
line.set_x2(dev01posline_flout, floutOpenTime+201600000)
line.set_x2(dev01negline_flout, floutOpenTime+201600000)
if i == 1
dev02posline_flout := line.new(floutOpenTime, flout_hi + flout_diff * i, floutEndTime, flout_lo + flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev02negline_flout := line.new(floutOpenTime, flout_hi - flout_diff * i, floutEndTime, flout_lo - flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if dayofweek == dayofweek.friday
line.set_x2(dev02posline_flout, floutOpenTime+201600000)
line.set_x2(dev02negline_flout, floutOpenTime+201600000)
if i == 1.5
dev03posline_flout := line.new(floutOpenTime, flout_hi + flout_diff * i, floutEndTime, flout_lo + flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev03negline_flout := line.new(floutOpenTime, flout_hi - flout_diff * i, floutEndTime, flout_lo - flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if dayofweek == dayofweek.friday
line.set_x2(dev03posline_flout, floutOpenTime+201600000)
line.set_x2(dev03negline_flout, floutOpenTime+201600000)
if i == 2
dev04posline_flout := line.new(floutOpenTime, flout_hi + flout_diff * i, floutEndTime, flout_lo + flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
dev04negline_flout := line.new(floutOpenTime, flout_hi - flout_diff * i, floutEndTime, flout_lo - flout_diff * i, xloc=xloc.bar_time, color=DevLNCol, style=DEVLSS, width=DEVLW)
if dayofweek == dayofweek.friday
line.set_x2(dev04posline_flout, floutOpenTime+201600000)
line.set_x2(dev04negline_flout, floutOpenTime+201600000)
else if FLOUTTime
flout_hi := math.max(high, flout_hi)
flout_lo := math.min(low, flout_lo)
flout_diff := flout_hi - flout_lo
for i = 0.5 to DevCount by 0.5
if i == 0.5 and ShowDev
line.set_y1(dev01posline_flout, flout_hi + flout_diff * i)
line.set_y2(dev01posline_flout, flout_hi + flout_diff * i)
line.set_y1(dev01negline_flout, flout_lo - flout_diff * i)
line.set_y2(dev01negline_flout, flout_lo - flout_diff * i)
if i == 1 and ShowDev
line.set_y1(dev02posline_flout, flout_hi + flout_diff * i)
line.set_y
Momentum and Momentum ChangeThis is a simple script, showing a line for the 14-day momentum (changes in price) along with a histogram that displays the change in momentum (an indicator of price acceleration).
Quarterly Earnings
Easy to access fundamentals of a company on the chart.
EPS and Sales data of post quarters
trade bằng mông xu hướng//@description=This TradingView indicator is designed to detect key price structure levels by identifying swing highs and lows on the chart. It automatically labels these points and draws trend zones (ranges) based on confirmed breakouts. The indicator helps traders visualize market structure shifts, determine trend direction (uptrend, downtrend, or neutral), and make more informed trading decisions. It includes customizable settings such as lookback period, label visibility, and zone colors, and supports multi-timeframe analysis for greater flexibility.
Triple CCI Multi-TimeframeIts simple 3 cci with 3 periods and 3 time frames all original settings just for those people who love to work with cci
Multi-Timeframe EMA Table (Woche, Tag, 4h, 1h)Title: Multi-Timeframe EMA Table (Weekly, Daily, 4h, 1h)
Description:
This Pine Script indicator provides a concise and clear Multi-Timeframe (MTF) Exponential Moving Average (EMA) analysis directly on your TradingView chart. It displays the EMA values for the 1-hour, 4-hour, 1-day, and 1-week timeframes in a customizable table.
Features:
Clear Table Display: Shows the current EMA values for predefined higher timeframes (1h, 4h, Day, Week).
Dynamic Status: The status column immediately visualizes whether the current price of your chart is above (Green) or below (Red) its respective Multi-Timeframe EMA.
Customizable EMA Length: The length of the EMA can be easily adjusted via the indicator settings, allowing you to tailor it to your preferred analysis.
Visual Confirmation: The corresponding Multi-Timeframe EMA lines are optionally plotted directly on the chart to visually confirm the table values.
Non-Repainting: The displayed EMA values and lines are programmed to be non-repainting, meaning their values do not change on already closed candles.
This indicator is a useful tool for traders who want to quickly get an overview of the EMA's position across different timeframes without constantly switching their chart timeframe. It's ideal for confirming trends and identifying support and resistance levels from a higher perspective.
SMC BOS Strategy for XAUUSDThis is a custom-built TradingView strategy that uses Smart Money Concept (SMC) logic to identify high-probability trend continuation and reversal entries based on Break of Structure (BOS) on XAUUSD. It is designed for traders looking to test institutional-style structure breaks with dynamic entry and risk-managed exits.
The strategy detects BOS using swing highs and lows, then enters trades based on price momentum (bullish or bearish candle confirmation). Each trade is automatically managed using a fixed stop loss in pips and a customizable risk-to-reward (RR) ratio. The goal is to backtest how BOS alone can drive clean directional entries, simulating Smart Money precision without repainting or false signals.
🔑 Key Features:
BOS-Based Entry Logic: Enters trades only after a valid break of structure (new higher high or lower low), signaling continuation from a Smart Money shift.
Momentum Filtered Entry: Requires candle confirmation to validate direction (e.g., bullish close after bullish BOS).
Full Backtest Engine: Built using strategy() functions, allowing you to test SL/TP performance and adjust position sizing.
Custom Risk Control: Adjust Stop Loss (in pips) and Target Profit using a flexible RR ratio (e.g. 1:2 or 1:3 setups).
Works Across Timeframes: Optimized for 15m, 1H, and 4H on XAUUSD, but works on any asset that respects structure.
⚙️ Settings:
Swing Sensitivity – Controls how strict pivot highs/lows are
Minimum Bar Spacing – Prevents overtrading after recent BOS
Stop Loss (in pips) – Fixed distance from entry
Risk/Reward Ratio – Multiplies SL for dynamic take-profit
Trade Direction – Supports both long and short with momentum
📊 How It Works:
Detects new structure break (BOS)
Confirms momentum with candle direction (close > open for long, close < open for short)
Triggers entry and sets TP/SL automatically
Logs results in the Strategy Tester for full backtest evaluation
📌 Optimized For:
XAUUSD (Gold)
Smart Money / SMC / ICT traders
Trend continuation + reversal structures
Backtest-focused strategy building
Institutional-level analysis
📎 Release Notes:
v1.0 – Initial release of BOS-only SMC strategy with full entry/exit simulation and strategy tester support.
⚠️ Disclaimer:
This strategy is built for educational and research purposes only. It is not a signal provider or financial advice. Always combine with your personal confirmation, confluence tools, and risk management.
9:15 AM Bullish SetupBAsically it will tell if market open price is greater than 1 % of prev close and also above 20 and 200 SMA
SMC Structure Levels – BOS & CHoCH for XAUUSDThis is a custom-made TradingView indicator designed to visualize high-confidence market structure shifts based on Smart Money Concepts (SMC), focusing on Break of Structure (BOS) and Change of Character (CHoCH) points. The tool is optimized for XAUUSD but works across all major forex, crypto, and index markets.
It identifies key pivot points and filters them using both price distance and bar spacing, helping traders focus only on meaningful structural changes — not noisy signals. This makes it ideal for traders looking to track institutional-style price behavior with clarity.
🔑 Key Features:
Clean BOS & CHoCH Labels: The indicator plots “BOS” above candles when a structural break occurs in the trend direction, and “CHoCH” below candles when early signs of a reversal appear.
Spaced Signals: Only plots structure shifts that meet both time and price distance filters, preventing clutter and overplotting on the chart.
Swing-Based Logic: Built on pivot high/low analysis with adjustable sensitivity, ensuring flexible structure detection on any timeframe.
Fully Customizable: Modify:
Swing Sensitivity (number of bars before/after pivot)
Minimum bar spacing between BOS/CHoCH signals
Minimum price movement (in pips) between labels
Toggle BOS or CHoCH visibility individually
No Repainting: Once confirmed, signals remain fixed on the chart for historical review.
Zero Clutter: Unlike typical SMC tools that flood the chart, this indicator prioritizes clarity and signal quality.
🧠 What is BOS & CHoCH?
Break of Structure (BOS): Indicates continuation of the current market trend.
Change of Character (CHoCH): Suggests a potential early trend reversal or shift in momentum.
These tools are often used by Smart Money traders to mark significant turning points and trend confirmations.
⚙️ Use Cases:
Structural tracking in Smart Money Concepts (SMC)
Identifying trend continuation or early reversal
XAUUSD (Gold) swing and intraday analysis
Support for Order Blocks, Liquidity Grabs, and FVG confluence
Backtesting market structure break behavior
📌 Best Pairs:
XAUUSD (Gold)
Any asset where structure-based analysis is relevant
📎 Release Notes:
v1.0 – Initial release of BOS/CHoCH structure tool with spacing and pip-distance filtering for XAUUSD analysis.
⚠️ Disclaimer:
This indicator is built for educational and analytical purposes only. It does not constitute trading advice or guarantee profitable signals. Always use with a proper risk management strategy and confirm signals with additional confluence.
✅ This matches the exact quality and structure of the description you showed earlier.
Just copy this into your TradingView script page when publishing. If you'd like the next version with Order Blocks or FVG, say the word.
xGhozt Percentage Price ChangeDisplays two dynamic horizontal lines at ±X% from the current price, with customizable colors and labels. Useful for visualizing profit targets, stop loss zones, or expected volatility ranges. Labels show both the percentage and the corresponding price.
HSI First 30m Candle Strategy (5m Chart)## HSI First Candle Breakout Strategy
USE on 10m TF for max profit rate.
**The HSI First Candle Breakout Strategy** is a systematic trading approach tailored for Hang Seng Index Futures during the main Hong Kong day session. The strategy is designed to capture early market momentum by reacting to the first significant move of the day.
### How It Works
- **Reference Candle:** At the start of each day session (09:00), the high and low of the first 15-minute candle are recorded.
- **Breakout Trigger:**
- A **buy (long) trade** is initiated if price breaks above the first candle’s high.
- A **sell (short) trade** is initiated if price breaks below the first candle’s low.
- **Stop Loss & Take Profit:**
- Stop-loss is placed on the opposite side of the reference candle.
- Take-profit target is set at a distance equal to the size of the reference candle (1R).
- **Filters:**
- Skip the day if the first candle’s range exceeds 200 index points.
- Only the first triggered direction is traded per session.
- All trades are closed before the market closes if neither target nor stop is hit.
- **Execution:** The strategy works best on intraday charts (5m or 15m) and is ideal for traders seeking disciplined, systematic intraday setups.
### Key Features
- Captures the day’s initial momentum burst.
- Strict risk management with predefined stops and targets.
- One trade per day, reducing overtrading and noise.
- Clear-cut, rule-based, and objective system—no discretion required.
**This strategy offers a transparent and robust framework for traders to systematically capture high-probability breakouts in the Hang Seng Index Futures market.**
Smart MTF S/R Levels[BullByte]
Smart MTF S/R Levels
Introduction & Motivation
Support and Resistance (S/R) levels are the backbone of technical analysis. However, most traders face two major challenges:
Manual S/R Marking: Drawing S/R levels by hand is time-consuming, subjective, and often inconsistent.
Multi-Timeframe Blind Spots: Key S/R levels from higher or lower timeframes are often missed, leading to surprise reversals or missed opportunities.
Smart MTF S/R Levels was created to solve these problems. It is a fully automated, multi-timeframe, multi-method S/R detection and visualization tool, designed to give traders a complete, objective, and actionable view of the market’s most important price zones.
What Makes This Indicator Unique?
Multi-Timeframe Analysis: Simultaneously analyzes up to three user-selected timeframes, ensuring you never miss a critical S/R level from any timeframe.
Multi-Method Confluence: Integrates several respected S/R detection methods—Swings, Pivots, Fibonacci, Order Blocks, and Volume Profile—into a single, unified system.
Zone Clustering: Automatically merges nearby levels into “zones” to reduce clutter and highlight areas of true market consensus.
Confluence Scoring: Each zone is scored by the number of methods and timeframes in agreement, helping you instantly spot the most significant S/R areas.
Reaction Counting: Tracks how many times price has recently interacted with each zone, providing a real-world measure of its importance.
Customizable Dashboard: A real-time, on-chart table summarizes all key S/R zones, their origins, confluence, and proximity to price.
Smart Alerts: Get notified when price approaches high-confluence zones, so you never miss a critical trading opportunity.
Why Should a Trader Use This?
Objectivity: Removes subjectivity from S/R analysis by using algorithmic detection and clustering.
Efficiency: Saves hours of manual charting and reduces analysis fatigue.
Comprehensiveness: Ensures you are always aware of the most relevant S/R zones, regardless of your trading timeframe.
Actionability: The dashboard and alerts make it easy to act on the most important levels, improving trade timing and risk management.
Adaptability: Works for all asset classes (stocks, forex, crypto, futures) and all trading styles (scalping, swing, position).
The Gap This Indicator Fills
Most S/R indicators focus on a single method or timeframe, leading to incomplete analysis. Manual S/R marking is error-prone and inconsistent. This indicator fills the gap by:
Automating S/R detection across multiple timeframes and methods
Objectively scoring and ranking zones by confluence and reaction
Presenting all this information in a clear, actionable dashboard
How Does It Work? (Technical Logic)
1. Level Detection
For each selected timeframe, the script detects S/R levels using:
SW (Swing High/Low): Recent price pivots where reversals occurred.
Pivot: Classic floor trader pivots (P, S1, R1).
Fib (Fibonacci): Key retracement levels (0.236, 0.382, 0.5, 0.618, 0.786) over the last 50 bars.
Bull OB / Bear OB: Institutional price zones based on bullish/bearish engulfing patterns.
VWAP / POC: Volume Weighted Average Price and Point of Control over the last 50 bars.
2. Level Clustering
Levels within a user-defined % distance are merged into a single “zone.”
Each zone records which methods and timeframes contributed to it.
3. Confluence & Reaction Scoring
Confluence: The number of unique methods/timeframes in agreement for a zone.
Reactions: The number of times price has touched or reversed at the zone in the recent past (user-defined lookback).
4. Filtering & Sorting
Only zones within a user-defined % of the current price are shown (to focus on actionable areas).
Zones can be sorted by confluence, reaction count, or proximity to price.
5. Visualization
Zones: Shaded boxes on the chart (green for support, red for resistance, blue for mixed).
Lines: Mark the exact level of each zone.
Labels: Show level, methods by timeframe (e.g., 15m (3 SW), 30m (1 VWAP)), and (if applicable) Fibonacci ratios.
Dashboard Table: Lists all nearby zones with full details.
6. Alerts
Optional alerts trigger when price approaches a zone with confluence above a user-set threshold.
Inputs & Customization (Explained for All Users)
Show Timeframe 1/2/3: Enable/disable analysis for each timeframe (e.g., 15m, 30m, 1h).
Show Swings/Pivots/Fibonacci/Order Blocks/Volume Profile: Select which S/R methods to include.
Show levels within X% of price: Only display zones near the current price (default: 3%).
How many swing highs/lows to show: Number of recent swings to include (default: 3).
Cluster levels within X%: Merge levels close together into a single zone (default: 0.25%).
Show Top N Zones: Limit the number of zones displayed (default: 8).
Bars to check for reactions: How far back to count price reactions (default: 100).
Sort Zones By: Choose how to rank zones in the dashboard (Confluence, Reactions, Distance).
Alert if Confluence >=: Set the minimum confluence score for alerts (default: 3).
Zone Box Width/Line Length/Label Offset: Control the appearance of zones and labels.
Dashboard Size/Location: Customize the dashboard table.
How to Read the Output
Shaded Boxes: Represent S/R zones. The color indicates type (green = support, red = resistance, blue = mixed).
Lines: Mark the precise level of each zone.
Labels: Show the level, methods by timeframe (e.g., 15m (3 SW), 30m (1 VWAP)), and (if applicable) Fibonacci ratios.
Dashboard Table: Columns include:
Level: Price of the zone
Methods (by TF): Which S/R methods and how many, per timeframe (see abbreviation key below)
Type: Support, Resistance, or Mixed
Confl.: Confluence score (higher = more significant)
React.: Number of recent price reactions
Dist %: Distance from current price (in %)
Abbreviations Used
SW = Swing High/Low (recent price pivots where reversals occurred)
Fib = Fibonacci Level (key retracement levels such as 0.236, 0.382, 0.5, 0.618, 0.786)
VWAP = Volume Weighted Average Price (price level weighted by volume)
POC = Point of Control (price level with the highest traded volume)
Bull OB = Bullish Order Block (institutional support zone from bullish price action)
Bear OB = Bearish Order Block (institutional resistance zone from bearish price action)
Pivot = Pivot Point (classic floor trader pivots: P, S1, R1)
These abbreviations appear in the dashboard and chart labels for clarity.
Example: How to Read the Dashboard and Labels (from the chart above)
Suppose you are trading BTCUSDT on a 15-minute chart. The dashboard at the top right shows several S/R zones, each with a breakdown of which timeframes and methods contributed to their detection:
Resistance zone at 119257.11:
The dashboard shows:
5m (1 SW), 15m (2 SW), 1h (3 SW)
This means the level 119257.11 was identified as a resistance zone by one swing high (SW) on the 5-minute timeframe, two swing highs on the 15-minute timeframe, and three swing highs on the 1-hour timeframe. The confluence score is 6 (total number of method/timeframe hits), and there has been 1 recent price reaction at this level. This suggests 119257.11 is a strong resistance zone, confirmed by multiple swing highs across all selected timeframes.
Mixed zone at 118767.97:
The dashboard shows:
5m (2 SW), 15m (2 SW)
This means the level 118767.97 was identified by two swing points on both the 5-minute and 15-minute timeframes. The confluence score is 4, and there have been 19 recent price reactions at this level, indicating it is a highly reactive zone.
Support zone at 117411.35:
The dashboard shows:
5m (2 SW), 1h (2 SW)
This means the level 117411.35 was identified as a support zone by two swing lows on the 5-minute timeframe and two swing lows on the 1-hour timeframe. The confluence score is 4, and there have been 2 recent price reactions at this level.
Mixed zone at 118291.45:
The dashboard shows:
15m (1 SW, 1 VWAP), 5m (1 VWAP), 1h (1 VWAP)
This means the level 118291.45 was identified by a swing and VWAP on the 15-minute timeframe, and by VWAP on both the 5-minute and 1-hour timeframes. The confluence score is 4, and there have been 12 recent price reactions at this level.
Support zone at 117103.10:
The dashboard shows:
15m (1 SW), 1h (1 SW)
This means the level 117103.10 was identified by a single swing low on both the 15-minute and 1-hour timeframes. The confluence score is 2, and there have been no recent price reactions at this level.
Resistance zone at 117899.33:
The dashboard shows:
5m (1 SW)
This means the level 117899.33 was identified by a single swing high on the 5-minute timeframe. The confluence score is 1, and there have been no recent price reactions at this level.
How to use this:
Zones with higher confluence (more methods and timeframes in agreement) and more recent reactions are generally more significant. For example, the resistance at 119257.11 is much stronger than the resistance at 117899.33, and the mixed zone at 118767.97 has shown the most recent price reactions, making it a key area to watch for potential reversals or breakouts.
Tip:
“SW” stands for Swing High/Low, and “VWAP” stands for Volume Weighted Average Price.
The format 15m (2 SW) means two swing points were detected on the 15-minute timeframe.
Best Practices & Recommendations
Use with Other Tools: This indicator is most powerful when combined with your own price action analysis and risk management.
Adjust Settings: Experiment with timeframes, clustering, and methods to suit your trading style and the asset’s volatility.
Watch for High Confluence: Zones with higher confluence and more reactions are generally more significant.
Limitations
No Future Prediction: The indicator does not predict future price movement; it highlights areas where price is statistically more likely to react.
Not a Standalone System: Should be used as part of a broader trading plan.
Historical Data: Reaction counts are based on historical price action and may not always repeat.
Disclaimer
This indicator is a technical analysis tool and does not constitute financial advice or a recommendation to buy or sell any asset. Trading involves risk, and past performance is not indicative of future results. Always use proper risk management and consult a financial advisor if needed.
Call and Put signals[vivekm8955]🔍 Strategy Overview
This adaptive strategy generates clear CALL (Buy) and PUT (Sell) signals by combining:
✅ Dual EMA structure
✅ Heikin Ashi trend confirmation
✅ Smoothed Stochastic Momentum Index (SMI)
✅ Take Profit (TP) signals via momentum reversal
✅ Dynamic support from average price action
The goal: Give retail traders institutional-grade signals with clarity, without lag.
📊 Trade Entry Logic
🔼 CALL Signal (Buy):
Fast EMA < Avg Price
Slow EMA < Avg Price
Slow EMA < Fast EMA
Confirmed by crossover
➡️ This implies price has dipped below value zones and is showing strength.
🔽 PUT Signal (Sell):
Fast EMA > Avg Price
Slow EMA > Avg Price
Slow EMA > Fast EMA
Confirmed by crossover
➡️ Indicates price is elevated and showing weakness.
🏁 Exit Logic (Take Profit)
✅ TP Buy Signal: SMI crosses below 0 → Weakening upside
✅ TP Sell Signal: SMI crosses above 0 → Weakening downside
These act as exit cues or partial booking areas.
📌 Visualization & Alerts
🔼 CALL Signal → Green label below candle
🔽 PUT Signal → Red label above candle
✅ TP Signal → Small label (TP) showing ideal exit points
🔔 Real-time alerts enabled (CALL, PUT, TP alerts)
Background color changes based on EMA crossovers for added confirmation.
🕯️ Additional Filters Used
Heikin Ashi Candles: For smoothing out noise and validating trends.
SMI (Double EMA): A momentum indicator better suited for trending markets.
📈 Dashboard Included
Displays current signal, SMI value, and TP status in real-time
Color-coded for easy interpretation
Auto-adaptive table (fixes out-of-bound issues)
📎 Ideal Timeframes
Timeframe Use Case
5m – 15m Intraday Scalping
1h – 4h Swing Trading
1D Positional Plays
🚦 Suggested Usage
Step Action
1️⃣ Confirm signal (CALL or PUT) on 1TF and 1 higher TF
2️⃣ Enter near signal candle close
3️⃣ Exit on TP label OR SMI reversal
4️⃣ Avoid entry during high volatility news events
⚠️ Disclaimer – Use with Caution!
⚠️ This script is for educational & analytical purposes only.
It does NOT guarantee profits, nor is it a financial advisory tool.
Always use risk management: Stop-losses, position sizing, capital preservation.
Do not trade blindly. Backtest it across market conditions.
Past performance is not indicative of future results.
Consult a SEBI-registered advisor for real trading decisions.
🔍 Candle Scanner (75m/D/W/M) + Volume + EMA + Trend//@version=5
indicator("🔍 Candle Scanner (75m/D/W/M) + Volume + EMA + Trend", overlay=true)
is75min = timeframe.period == "75"
// Time Slot Logic for 75-min only
startTime = timestamp("Asia/Kolkata", year, month, dayofmonth, 9, 15)
candle75 = math.floor((time - startTime) / (75 * 60 * 1000)) + 1
candleNo = is75min and candle75 >= 1 and candle75 <= 5 ? candle75 : na
getTimeSlot(n) =>
slot = ""
if n == 1
slot := "09:15–10:30"
else if n == 2
slot := "10:30–11:45"
else if n == 3
slot := "11:45–13:00"
else if n == 4
slot := "13:00–14:15"
else if n == 5
slot := "14:15–15:30"
slot
// EMA Filters
ema20 = ta.ema(close, 20)
ema50 = ta.ema(close, 50)
aboveEMA20 = close > ema20
aboveEMA50 = close > ema50
// Volume Strength
avgVol = ta.sma(volume, 20)
volStrength = volume > avgVol ? "High Volume" : "Low Volume"
// Candle Body Strength
bodySize = math.abs(close - open)
fullSize = high - low
bodyStrength = fullSize > 0 ? (bodySize / fullSize > 0.6 ? "Strong Body" : "Small Body") : "Small Body"
// Prior Trend
priorTrend = close < close and close < close ? "Downtrend" :
close > close and close > close ? "Uptrend" : "Sideways"
// Patterns
bullishEngulfing = close > open and close < open and close > open and open < close
bearishEngulfing = close < open and close > open and close < open and open > close
hammer = (high - low) > 3 * bodySize and (close - low) / (0.001 + high - low) > 0.6 and (open - low) / (0.001 + high - low) > 0.6
shootingStar = (high - low) > 3 * bodySize and (high - close) / (0.001 + high - low) > 0.6 and (high - open) / (0.001 + high - low) > 0.6
doji = bodySize <= fullSize * 0.1
morningStar = close < open and bodySize < (high - low ) * 0.3 and close > (open + close ) / 2
eveningStar = close > open and bodySize < (high - low ) * 0.3 and close < (open + close ) / 2
// Pattern Selection
pattern = ""
sentiment = ""
colorBox = color.gray
yOffset = 15
if bullishEngulfing
pattern := "Bull Engulfing"
sentiment := "Bullish"
colorBox := color.green
yOffset := -15
else if bearishEngulfing
pattern := "Bear Engulfing"
sentiment := "Bearish"
colorBox := color.red
yOffset := 15
else if hammer
pattern := "Hammer"
sentiment := "Bullish"
colorBox := color.green
yOffset := -15
else if shootingStar
pattern := "Shooting Star"
sentiment := "Bearish"
colorBox := color.red
yOffset := 15
else if doji
pattern := "Doji"
sentiment := "Neutral"
colorBox := color.gray
yOffset := 15
else if morningStar
pattern := "Morning Star"
sentiment := "Bullish"
colorBox := color.green
yOffset := -15
else if eveningStar
pattern := "Evening Star"
sentiment := "Bearish"
colorBox := color.red
yOffset := 15
timeSlot = is75min and not na(candleNo) ? getTimeSlot(candleNo) : ""
info = pattern != "" ? "🕒 " + (is75min ? timeSlot + " | " : "") + pattern + " (" + sentiment + ") | " + volStrength + " | " + bodyStrength + " | Trend: " + priorTrend + " | EMA20: " + (aboveEMA20 ? "Above" : "Below") + " | EMA50: " + (aboveEMA50 ? "Above" : "Below") : ""
// Label Draw
var label lb = na
if info != ""
lb := label.new(bar_index, high + yOffset, text=info, style=label.style_label_down, textcolor=color.white, size=size.small, color=colorBox)
label.delete(lb )
// Smart Alert
validAlert = pattern != "" and (volStrength == "High Volume") and bodyStrength == "Strong Body" and (aboveEMA20 or aboveEMA50)
alertcondition(validAlert, title="📢 Smart Candle Alert", message="Smart Alert: Candle with Volume + EMA + Trend + Pattern Filtered")
CM Donchian Channel Pro Mod V3// ==============================================================================
// CM Donchian Channel Pro Mod V3
//
// 🔹 Original Author: ChrisMoody
// 🔹 Modified By: Markking77
// 🔹 License: Mozilla Public License 2.0
// 🔹 License Link: mozilla.org
//
// ------------------------------------------------------------------------------
// Description:
// This is an enhanced version of the original Donchian Channel by ChrisMoody,
// modified under the MPL 2.0 license by Markking77.
//
// This indicator plots upper and lower Donchian Channels with added options
// for mid-line, breakout highlights, arrows, and channel fill.
// It helps traders identify breakout zones and trend reversals.
//
// ------------------------------------------------------------------------------
// ✨ Features:
// ✅ Adjustable Upper & Lower Channel Lengths
// ✅ Optional Mid-Line for trend confirmation
// ✅ Highlight breakout bars on channel breaks
// ✅ Optional breakout entry arrows
// ✅ Channel fill for better zone visibility
// ✅ Built-in alerts for breakout above/below
//
// ------------------------------------------------------------------------------
// Disclaimer:
// This Pine Script® code is for educational purposes only and does not provide
// financial advice. Use it at your own risk. Always manage your risk properly.
//
// ------------------------------------------------------------------------------
// Tip:
// You can adjust lengths, colors and display options to suit your trading style.
//
// ==============================================================================
Multi-Timeframe RSI Table# Multi-Timeframe RSI Table
## Overview
This indicator displays RSI (Relative Strength Index) values across multiple timeframes in a convenient table format, allowing traders to quickly assess momentum conditions across different time horizons without switching charts.
## Features
• *7 Timeframes*: 5m, 15m, 1h, 4h, Daily, Weekly, Monthly
• *Color-coded RSI Values*:
- 🔴 Red: Overbought (≥70)
- 🟢 Green: Oversold (≤30)
- 🟠 Orange: Bullish momentum (50-70)
- 🟡 Yellow: Bearish momentum (30-50)
• *Clean Table Display*: Positioned in top-right corner for easy viewing
• *Customizable Settings*: Adjustable RSI length and overbought/oversold levels
## How to Use
1. Add the indicator to your chart
2. The table automatically displays current RSI values for all timeframes
3. Use color coding to quickly identify:
- *Buying opportunities* when multiple timeframes show green (oversold)
- *Selling opportunities* when multiple timeframes show red (overbought)
- *Trend alignment* when higher timeframes match your trading direction
## Trading Applications
• *Multi-timeframe analysis*: Confirm signals across different time horizons
• *Entry timing*: Find optimal entry points when shorter timeframes align with longer trends
• *Risk management*: Avoid trades when higher timeframes show opposite momentum
• *Swing trading*: Identify when daily/weekly RSI supports your position direction
## Settings
• *RSI Length*: Default 14 periods (standard RSI calculation)
• *Overbought Level*: Default 70 (customizable)
• *Oversold Level*: Default 30 (customizable)
## Best Practices
• Look for alignment across multiple timeframes for stronger signals
• Use higher timeframe RSI to determine overall trend direction
• Combine with price action and support/resistance levels
• Avoid trading against strong momentum shown in higher timeframes
Perfect for day traders, swing traders, and anyone who needs quick multi-timeframe RSI analysis without constantly switching chart timeframes.
EMAs + VWAP + SMADaytrade Dream:
5 EMAs
1SMA
VWAP
This script is used to plot on the chart:
5 EMAS:
10,20,50,100 and 200
VWAP:
White Vwap line
1 SMA:
200 SMA
EMA Ribbon with TableThis indicator plots multiple EMAs (5, 8, 13, 21, 34, 55, 89, 144, 233, 377) based on Fibonacci levels. Each line has a distinct color, and a clean table displays their real-time values. Great for spotting trend direction, crossovers, and momentum at a glance.